static void io_mem_init(void);
static void memory_map_init(void);
-static void *qemu_safe_ram_ptr(ram_addr_t addr);
static MemoryRegion io_mem_watch;
#endif
#else
static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
{
- tb_invalidate_phys_addr(cpu_get_phys_page_debug(cpu, pc) |
- (pc & ~TARGET_PAGE_MASK));
+ hwaddr phys = cpu_get_phys_page_debug(cpu, pc);
+ if (phys != -1) {
+ tb_invalidate_phys_addr(phys | (pc & ~TARGET_PAGE_MASK));
+ }
}
#endif
#endif /* TARGET_HAS_ICE */
abort();
}
-CPUArchState *cpu_copy(CPUArchState *env)
+#if !defined(CONFIG_USER_ONLY)
+static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
{
- CPUArchState *new_env = cpu_init(env->cpu_model_str);
-#if defined(TARGET_HAS_ICE)
- CPUBreakpoint *bp;
- CPUWatchpoint *wp;
-#endif
-
- /* Reset non arch specific state */
- cpu_reset(ENV_GET_CPU(new_env));
-
- /* Copy arch specific state into the new CPU */
- memcpy(new_env, env, sizeof(CPUArchState));
+ RAMBlock *block;
- /* Clone all break/watchpoints.
- Note: Once we support ptrace with hw-debug register access, make sure
- BP_CPU break/watchpoints are handled correctly on clone. */
- QTAILQ_INIT(&env->breakpoints);
- QTAILQ_INIT(&env->watchpoints);
-#if defined(TARGET_HAS_ICE)
- QTAILQ_FOREACH(bp, &env->breakpoints, entry) {
- cpu_breakpoint_insert(new_env, bp->pc, bp->flags, NULL);
+ /* The list is protected by the iothread lock here. */
+ block = ram_list.mru_block;
+ if (block && addr - block->offset < block->length) {
+ goto found;
}
- QTAILQ_FOREACH(wp, &env->watchpoints, entry) {
- cpu_watchpoint_insert(new_env, wp->vaddr, (~wp->len_mask) + 1,
- wp->flags, NULL);
+ QTAILQ_FOREACH(block, &ram_list.blocks, next) {
+ if (addr - block->offset < block->length) {
+ goto found;
+ }
}
-#endif
- return new_env;
+ fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
+ abort();
+
+found:
+ ram_list.mru_block = block;
+ return block;
}
-#if !defined(CONFIG_USER_ONLY)
static void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t end,
uintptr_t length)
{
- uintptr_t start1;
+ RAMBlock *block;
+ ram_addr_t start1;
- /* we modify the TLB cache so that the dirty bit will be set again
- when accessing the range */
- start1 = (uintptr_t)qemu_safe_ram_ptr(start);
- /* Check that we don't span multiple blocks - this breaks the
- address comparisons below. */
- if ((uintptr_t)qemu_safe_ram_ptr(end - 1) - start1
- != (end - 1) - start) {
- abort();
- }
+ block = qemu_get_ram_block(start);
+ assert(block == qemu_get_ram_block(end - 1));
+ start1 = (uintptr_t)block->host + (start - block->offset);
cpu_tlb_reset_dirty_all(start1, length);
-
}
/* Note: start and end must be within the same ram block. */
uint16_t section);
static subpage_t *subpage_init(AddressSpace *as, hwaddr base);
+static void *(*phys_mem_alloc)(size_t size) = qemu_anon_ram_alloc;
+
+/*
+ * Set a custom physical guest memory alloator.
+ * Accelerators with unusual needs may need this. Hopefully, we can
+ * get rid of it eventually.
+ */
+void phys_mem_set_alloc(void *(*alloc)(size_t))
+{
+ phys_mem_alloc = alloc;
+}
+
static uint16_t phys_section_add(MemoryRegionSection *section)
{
/* The physical section number is ORed with a page-aligned
qemu_mutex_unlock(&ram_list.mutex);
}
-#if defined(__linux__) && !defined(TARGET_S390X)
+#ifdef __linux__
#include <sys/vfs.h>
block->fd = fd;
return area;
}
+#else
+static void *file_ram_alloc(RAMBlock *block,
+ ram_addr_t memory,
+ const char *path)
+{
+ fprintf(stderr, "-mem-path not supported on this host\n");
+ exit(1);
+}
#endif
static ram_addr_t find_ram_offset(ram_addr_t size)
size = TARGET_PAGE_ALIGN(size);
new_block = g_malloc0(sizeof(*new_block));
+ new_block->fd = -1;
/* This assumes the iothread lock is taken here too. */
qemu_mutex_lock_ramlist();
if (host) {
new_block->host = host;
new_block->flags |= RAM_PREALLOC_MASK;
+ } else if (xen_enabled()) {
+ if (mem_path) {
+ fprintf(stderr, "-mem-path not supported with Xen\n");
+ exit(1);
+ }
+ xen_ram_alloc(new_block->offset, size, mr);
} else {
if (mem_path) {
-#if defined (__linux__) && !defined(TARGET_S390X)
+ if (phys_mem_alloc != qemu_anon_ram_alloc) {
+ /*
+ * file_ram_alloc() needs to allocate just like
+ * phys_mem_alloc, but we haven't bothered to provide
+ * a hook there.
+ */
+ fprintf(stderr,
+ "-mem-path not supported with this accelerator\n");
+ exit(1);
+ }
new_block->host = file_ram_alloc(new_block, size, mem_path);
+ }
+ if (!new_block->host) {
+ new_block->host = phys_mem_alloc(size);
if (!new_block->host) {
- new_block->host = qemu_anon_ram_alloc(size);
- memory_try_enable_merging(new_block->host, size);
- }
-#else
- fprintf(stderr, "-mem-path option unsupported\n");
- exit(1);
-#endif
- } else {
- if (xen_enabled()) {
- xen_ram_alloc(new_block->offset, size, mr);
- } else if (kvm_enabled()) {
- /* some s390/kvm configurations have special constraints */
- new_block->host = kvm_ram_alloc(size);
- } else {
- new_block->host = qemu_anon_ram_alloc(size);
+ fprintf(stderr, "Cannot set up guest memory '%s': %s\n",
+ new_block->mr->name, strerror(errno));
+ exit(1);
}
memory_try_enable_merging(new_block->host, size);
}
qemu_ram_setup_dump(new_block->host, size);
qemu_madvise(new_block->host, size, QEMU_MADV_HUGEPAGE);
+ qemu_madvise(new_block->host, size, QEMU_MADV_DONTFORK);
if (kvm_enabled())
kvm_setup_guest_memory(new_block->host, size);
ram_list.version++;
if (block->flags & RAM_PREALLOC_MASK) {
;
- } else if (mem_path) {
-#if defined (__linux__) && !defined(TARGET_S390X)
- if (block->fd) {
- munmap(block->host, block->length);
- close(block->fd);
- } else {
- qemu_anon_ram_free(block->host, block->length);
- }
-#else
- abort();
+ } else if (xen_enabled()) {
+ xen_invalidate_map_cache_entry(block->host);
+#ifndef _WIN32
+ } else if (block->fd >= 0) {
+ munmap(block->host, block->length);
+ close(block->fd);
#endif
} else {
- if (xen_enabled()) {
- xen_invalidate_map_cache_entry(block->host);
- } else {
- qemu_anon_ram_free(block->host, block->length);
- }
+ qemu_anon_ram_free(block->host, block->length);
}
g_free(block);
break;
vaddr = block->host + offset;
if (block->flags & RAM_PREALLOC_MASK) {
;
+ } else if (xen_enabled()) {
+ abort();
} else {
flags = MAP_FIXED;
munmap(vaddr, length);
- if (mem_path) {
-#if defined(__linux__) && !defined(TARGET_S390X)
- if (block->fd) {
+ if (block->fd >= 0) {
#ifdef MAP_POPULATE
- flags |= mem_prealloc ? MAP_POPULATE | MAP_SHARED :
- MAP_PRIVATE;
+ flags |= mem_prealloc ? MAP_POPULATE | MAP_SHARED :
+ MAP_PRIVATE;
#else
- flags |= MAP_PRIVATE;
-#endif
- area = mmap(vaddr, length, PROT_READ | PROT_WRITE,
- flags, block->fd, offset);
- } else {
- flags |= MAP_PRIVATE | MAP_ANONYMOUS;
- area = mmap(vaddr, length, PROT_READ | PROT_WRITE,
- flags, -1, 0);
- }
-#else
- abort();
+ flags |= MAP_PRIVATE;
#endif
+ area = mmap(vaddr, length, PROT_READ | PROT_WRITE,
+ flags, block->fd, offset);
} else {
-#if defined(TARGET_S390X) && defined(CONFIG_KVM)
- flags |= MAP_SHARED | MAP_ANONYMOUS;
- area = mmap(vaddr, length, PROT_EXEC|PROT_READ|PROT_WRITE,
- flags, -1, 0);
-#else
+ /*
+ * Remap needs to match alloc. Accelerators that
+ * set phys_mem_alloc never remap. If they did,
+ * we'd need a remap hook here.
+ */
+ assert(phys_mem_alloc == qemu_anon_ram_alloc);
+
flags |= MAP_PRIVATE | MAP_ANONYMOUS;
area = mmap(vaddr, length, PROT_READ | PROT_WRITE,
flags, -1, 0);
-#endif
}
if (area != vaddr) {
fprintf(stderr, "Could not remap addr: "
}
#endif /* !_WIN32 */
-static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
-{
- RAMBlock *block;
-
- /* The list is protected by the iothread lock here. */
- block = ram_list.mru_block;
- if (block && addr - block->offset < block->length) {
- goto found;
- }
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
- if (addr - block->offset < block->length) {
- goto found;
- }
- }
-
- fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
- abort();
-
-found:
- ram_list.mru_block = block;
- return block;
-}
-
/* Return a host pointer to ram allocated with qemu_ram_alloc.
With the exception of the softmmu code in this file, this should
only be used for local memory (e.g. video ram) that the device owns,
return block->host + (addr - block->offset);
}
-/* Return a host pointer to ram allocated with qemu_ram_alloc. Same as
- * qemu_get_ram_ptr but do not touch ram_list.mru_block.
- *
- * ??? Is this still necessary?
- */
-static void *qemu_safe_ram_ptr(ram_addr_t addr)
-{
- RAMBlock *block;
-
- /* The list is protected by the iothread lock here. */
- QTAILQ_FOREACH(block, &ram_list.blocks, next) {
- if (addr - block->offset < block->length) {
- if (xen_enabled()) {
- /* We need to check if the requested address is in the RAM
- * because we don't want to map the entire memory in QEMU.
- * In that case just map until the end of the page.
- */
- if (block->offset == 0) {
- return xen_map_cache(addr, 0, 0);
- } else if (block->host == NULL) {
- block->host =
- xen_map_cache(block->offset, block->length, 1);
- }
- }
- return block->host + (addr - block->offset);
- }
- }
-
- fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
- abort();
-
- return NULL;
-}
-
/* Return a host pointer to guest's ram. Similar to qemu_get_ram_ptr
* but takes a size argument */
static void *qemu_ram_ptr_length(ram_addr_t addr, hwaddr *size)
uint8_t buf[4];
#if defined(DEBUG_SUBPAGE)
- printf("%s: subpage %p len %d addr " TARGET_FMT_plx "\n", __func__,
+ printf("%s: subpage %p len %u addr " TARGET_FMT_plx "\n", __func__,
subpage, len, addr);
#endif
address_space_read(subpage->as, addr + subpage->base, buf, len);
uint8_t buf[4];
#if defined(DEBUG_SUBPAGE)
- printf("%s: subpage %p len %d addr " TARGET_FMT_plx
+ printf("%s: subpage %p len %u addr " TARGET_FMT_plx
" value %"PRIx64"\n",
__func__, subpage, len, addr, value);
#endif
}
static bool subpage_accepts(void *opaque, hwaddr addr,
- unsigned size, bool is_write)
+ unsigned len, bool is_write)
{
subpage_t *subpage = opaque;
#if defined(DEBUG_SUBPAGE)
- printf("%s: subpage %p %c len %d addr " TARGET_FMT_plx "\n",
+ printf("%s: subpage %p %c len %u addr " TARGET_FMT_plx "\n",
__func__, subpage, is_write ? 'w' : 'r', len, addr);
#endif
return address_space_access_valid(subpage->as, addr + subpage->base,
- size, is_write);
+ len, is_write);
}
static const MemoryRegionOps subpage_ops = {
idx = SUBPAGE_IDX(start);
eidx = SUBPAGE_IDX(end);
#if defined(DEBUG_SUBPAGE)
- printf("%s: %p start %08x end %08x idx %08x eidx %08x mem %ld\n", __func__,
- mmio, start, end, idx, eidx, memory);
+ printf("%s: %p start %08x end %08x idx %08x eidx %08x section %d\n",
+ __func__, mmio, start, end, idx, eidx, section);
#endif
for (; idx <= eidx; idx++) {
mmio->sub_section[idx] = section;
"subpage", TARGET_PAGE_SIZE);
mmio->iomem.subpage = true;
#if defined(DEBUG_SUBPAGE)
- printf("%s: %p base " TARGET_FMT_plx " len %08x %d\n", __func__,
- mmio, base, TARGET_PAGE_SIZE, subpage_memory);
+ printf("%s: %p base " TARGET_FMT_plx " len %08x\n", __func__,
+ mmio, base, TARGET_PAGE_SIZE);
#endif
subpage_register(mmio, 0, TARGET_PAGE_SIZE-1, PHYS_SECTION_UNASSIGNED);
address_space_init(&address_space_memory, system_memory, "memory");
system_io = g_malloc(sizeof(*system_io));
- memory_region_init(system_io, NULL, "io", 65536);
+ memory_region_init_io(system_io, NULL, &unassigned_io_ops, NULL, "io",
+ 65536);
address_space_init(&address_space_io, system_io, "I/O");
memory_listener_register(&core_memory_listener, &address_space_memory);
- memory_listener_register(&tcg_memory_listener, &address_space_memory);
+ if (tcg_enabled()) {
+ memory_listener_register(&tcg_memory_listener, &address_space_memory);
+ }
}
MemoryRegion *get_system_memory(void)
if (bounce.buffer) {
return NULL;
}
- bounce.buffer = qemu_memalign(TARGET_PAGE_SIZE, TARGET_PAGE_SIZE);
+ /* Avoid unbounded allocations */
+ l = MIN(l, TARGET_PAGE_SIZE);
+ bounce.buffer = qemu_memalign(TARGET_PAGE_SIZE, l);
bounce.addr = addr;
bounce.len = l;
projects / qemu.git / blobdiff