Jan Kiszka [Fri, 7 Oct 2011 10:27:25 +0000 (12:27 +0200)]
pcnet: Add link state support
Update lnkst on link state changes so that guests can obtain this
information via reading back the LED output pin. Works for Linux but
not for guests that depend on the missing PHY.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 26 Sep 2011 17:01:45 +0000 (19:01 +0200)]
pcnet-pci: Fix PIO word access to PROM
Implement the various IO access widths according to the spec. This
specifically unbreaks word and dword access to the PROM area that is
mapped into IO space. It also drops redundant upper limit checks and
spurious "return void".
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Mon, 26 Sep 2011 17:01:44 +0000 (19:01 +0200)]
pcnet: Move BCR defines to header
This moves BCR defines to the common header and immediately makes use of
them to add BCR_APROMWE, replacing the open-coded write check in
pcnet_aprom_writeb.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Wayne Xia [Wed, 12 Oct 2011 03:32:41 +0000 (11:32 +0800)]
Sort the help info shown in monitor at runtime
This patch would try sort the command list in monitor at runtime. As a result,
command help and help info would show a more friendly sorted command list.
For eg:
(qemu)help
acl_add
acl_policy
acl_remove
acl_reset
acl_show
balloon
block_passwd
...
the command list is sorted.
v3: using qsort function to sort the command list.
Tested-by: Wenyi Gao <wenyi@linux.vnet.ibm.com> Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Fri, 30 Sep 2011 05:26:16 +0000 (15:26 +1000)]
virtio: Add PCI memory BAR in addition to PIO BAR
Currently, virtio devices are usually presented to the guest as an
emulated PCI device, virtio_pci. Although the actual IO operations
are done through system memory, the configuration of the virtio device
is done through the one PCI IO space BAR that virtio_pci presents.
But PCI IO space (aka PIO) is deprecated for modern PCI devices, and
on some systems with many PCI domains accessing PIO space can be
problematic. For example on the existing PowerVM implementation of
the PAPR spec, PCI PIO access is not supported at all. We're hoping
that our KVM implementation will support PCI PIO (once we support PCI
at all), but it will probably have some irritating limitations.
This patch, therefore, extends the virtio_pci device to have a PCI
memory space (MMIO) BAR as well as the IO BAR. The MMIO BAR contains
exactly the same registers, in exactly the same layout as the existing
PIO BAR.
Because the PIO BAR is still present, existing guest drivers should
still work fine. With this change in place, future guest drivers can
check for an MMIO BAR and use that if present (falling back to PIO
when possible to support older qemu versions).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:58 +0000 (17:06 +1100)]
usb-uhci: Use PCI DMA stub functions
This updates the usb-uhci device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:57 +0000 (17:06 +1100)]
usb-ehci: Use PCI DMA stub functions
This updates the usb-ehci device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:56 +0000 (17:06 +1100)]
PCI IDE: Use PCI DMA stub functions
This updates the PCI IDE device emulation to use the explicit PCI DMA
wrapper to initialize its scatter/gathjer structure. This means this
driver should not need further changes when the sglist interface is
extended to support IOMMUs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the pcnet-pci device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the lsi53c895a device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the e1000 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the es1370 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the ac97 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the eepro100 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This updates the rtl8139 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:47 +0000 (17:06 +1100)]
Add stub functions for PCI device models to do PCI DMA
This patch adds functions to pci.[ch] to perform PCI DMA operations.
At present, these are just stubs which perform directly cpu physical
memory accesses. Stubs are included which are analogous to
cpu_physical_memory_{read,write}(), the stX_phys() and ldX_phys()
functions and cpu_physical_memory_{map,unmap}().
In addition, a wrapper around qemu_sglist_init() is provided, which
also takes a PCIDevice *. It's assumed that _init() is the only
sglist function which will need wrapping, the idea being that once we
have IOMMU support whatever IOMMU context handle the wrapper derives
from the PCI device will be stored within the sglist structure for
later use.
Using these stubs, however, distinguishes PCI device DMA transactions from
other accesses to physical memory, which will allow PCI IOMMU support to
be added in one place, rather than updating every PCI driver at that time.
That is, it allows us to update individual PCI drivers to support an IOMMU
without having yet determined the details of how the IOMMU emulation will
operate. This will let us remove the most bitrot-sensitive part of an
IOMMU patch in advance.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:46 +0000 (17:06 +1100)]
Use dma_addr_t type for scatter/gather code
This patch uses the newly created dma_addr_t type throughout the
scatter/gather handling code in dma-helpers.c whenever we need to
represent a dma bus address. This makes a better distinction as to
what is a bus address and what is a cpu physical address. Since we
don't support IOMMUs yet, they can't be very different for now, but
that will change in future, and this preliminary helps clarify what's
going on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 31 Oct 2011 06:06:45 +0000 (17:06 +1100)]
Define DMA address and direction types
As a preliminary to adding more extensive DMA and IOMMU infrastructure
support into qemu, this patch defines a dma_addr_t for storing DMA bus
addresses and a DMADirection enum which describes whether a DMA is
from an external device to main memory or from main memory to an
external device.
For now dma_addr_t is just defined to be target_phys_addr_t, but in
future, we can change this to support machines where we have bus
addresses which don't necessarily have the same format as CPU physical
addresses.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the ps2 device track its ledstate so that we can migrate it.
Otherwise it gets lost across migration, and spice-server gets
confused about the actual keyboard state and sends bogus
caps/scroll/num key events. This fixes RH bug #729294
We only need to migrate the state when it is different of the default
one (0).
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 7 Oct 2011 13:59:01 +0000 (15:59 +0200)]
checkpatch: remove rule on non-indented labels
There are 508 non-indented (non-default) labels, and 511 that are
indented. So the rule is debatable at least. Actually, in the
common case of labels at the outermost scope, there is really just
one place where to put the label, so the rule is just wrong IMHO.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Tue, 1 Nov 2011 20:57:01 +0000 (20:57 +0000)]
Merge branch 'ppc-next' of git://repo.or.cz/qemu/agraf
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (24 commits)
pseries: Add partial support for PCI
ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate
pseries: Allow writes to KVM accelerated TCE table
KVM: PPC: Override host vmx/vsx/dfp only when information known
ppc: Fix up usermode only builds
pseries: Correct vmx/dfp handling in both KVM and TCG cases
PPC: Fail configure when libfdt is not available
ppc: Avoid decrementer related kvm exits
PPC: Disable non-440 CPUs for ppcemb target
PPC: Bump qemu-system-ppc to 64-bit physical address space
pseries: Under kvm use guest cpu = host cpu by default
ppc: Add cpu defs for POWER7 revisions 2.1 and 2.3
ppc: First cut implementation of -cpu host
ppc: Remove broken partial PVR matching
pseries: Update SLOF firmware image
pseries: Add device tree properties for VMX/VSX and DFP under kvm
ppc: Generalize the kvmppc_get_clockfreq() function
Set an invalid-bits mask for each SPE instructions
pseries: Update SLOF firmware image
pseries: Use Book3S-HV TCE acceleration capabilities
...
Max Filippov [Thu, 27 Oct 2011 22:10:27 +0000 (02:10 +0400)]
opencores_eth: fix RX path: FCS, padding and TL
OpenCores 10/100 Mbps Ethernet MAC specification doesn't clearly state
whether FCS is counted in the RX frame length or not. Looks like it is.
Append zero FCS to the received frames.
Get rid of big static buffer for RX frame padding, optimize it for the
most common MINFL value range.
Set RXD_TL for the long frames only when HUGEN bit is set.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 27 Oct 2011 07:12:04 +0000 (09:12 +0200)]
migration: flush migration data to disk.
This patch increases robustness when migrating to a file with
two little changes:
(1) Before closing the migration file handle checks if it happens to be
a regular file and if so it issues a fsync. This way the data is
flushed to disk before qemu sends the migration completed event.
(2) It adds error checking. In case either fsync or close syscall
fails pass up the error (and fail migration).
[ v2: return -errno instead of -1 ]
Cc: Juan Quintela <quintela@redhat.com> Cc: Jiri Denemark <jdenemar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 28 Oct 2011 16:59:52 +0000 (14:59 -0200)]
Fix segfault on migration completion
A simple migration reproduces it:
1. Start the source VM with:
# qemu [...] -S
2. Start the destination VM with:
# qemu <source VM cmd-line> -incoming tcp:0:4444
3. In the source VM:
(qemu) migrate -d tcp:0:4444
4. The source VM will segfault as soon as migration completes (might not
happen in the first try)
What is happening here is that qemu_file_put_notify() can end up closing
's->file' (in which case it's also set to NULL). The call stack is rather
complex, but Eduardo helped tracking it to:
David Gibson [Fri, 28 Oct 2011 04:26:18 +0000 (15:26 +1100)]
Add qapi related generated files to .gitignore
.gitignore already lists the qapi-generated subdirectory which includes a
number of files generated during build. However, there are some additional
files generated by the qapi build which go in the top level directory.
This patch adds them to .gitignore, removing the irritating noise from
diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Eric Sunshine [Tue, 1 Nov 2011 09:39:49 +0000 (05:39 -0400)]
qemu-barrier: Fix build failure on PowerPC Mac OS X
qemu-barrier.h tests if macro __powerpc__ is defined, however, the
preprocessor on PowerPC Mac OS X defines only __POWERPC__, not
__powerpc__. Resolve by testing instead for qemu-provided _ARCH_PPC.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pavel Borzenkov [Mon, 24 Oct 2011 11:31:30 +0000 (07:31 -0400)]
fw_cfg: Use g_file_get_contents instead of multiple fread() calls
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 28 Oct 2011 09:52:42 +0000 (10:52 +0100)]
Make cpu_single_env thread-local
Make cpu_single_env thread-local. This fixes a regression
in handling of multi-threaded programs in linux-user mode
(bug 823902).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Peter Maydell: rename tls_cpu_single_env to cpu_single_env] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 28 Oct 2011 09:52:40 +0000 (10:52 +0100)]
qemu-tls.h: Add abstraction layer for TLS variables
Add an abstraction layer for defining and using thread-local
variables. For the moment this is implemented only for Linux,
which means they can only be used in restricted circumstances.
The abstraction layer allows us to add POSIX and Win32 support
later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Mon, 31 Oct 2011 14:54:09 +0000 (08:54 -0600)]
Error check find_ram_offset
Spotted via code review, we initialize offset to 0 to avoid a
compiler warning, but in the unlikely case that offset is
never set to something else, we should abort instead of return
a value that will almost certainly cause problems.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Fri, 28 Oct 2011 14:13:50 +0000 (16:13 +0200)]
usb-host: fix host close
The whole usb_host_close() function is skipped in case the device is not
in attached state. This is wrong though, only then usb_device_detach()
must be skipped, all other cleanup (especially device reset and closing
the file handle) still needs to be done. There are code paths where
usb_host_close() is called with the device in detached state already.
This fixes usb-host devices not being released and returned to the host
after removing them with device_del.
Roy Tam [Thu, 15 Sep 2011 03:25:47 +0000 (11:25 +0800)]
usb: change VID/PID for usb-hub and usb-msd to prevent conflict
Some USB drivers, for example USBASPI.SYS, will skip different type of
device which has same VID/PID. The following patch helps preventing
usb-msd being skipped by the driver.
Signed-off-by: Roy Tam <roytam@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stefan Weil [Mon, 31 Oct 2011 20:29:46 +0000 (21:29 +0100)]
Support running QEMU on Valgrind
Valgrind is a tool which can automatically detect many kinds of bugs.
Running QEMU on Valgrind with x86_64 hosts was not possible because
Valgrind aborts when memalign is called with an alignment larger than
1 MiB. QEMU normally uses 2 MiB on Linux x86_64.
Now the alignment is reduced to the page size when QEMU is running on
Valgrind.
v2:
Instead of using the macro RUNNING_ON_VALGRIND from valgrind.h,
the patch now uses a hack from libvirt which tests for the pre-loaded
vgpreload_*.so shared libraries. This avoids the need for valgrind.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andreas Färber [Mon, 31 Oct 2011 23:03:07 +0000 (00:03 +0100)]
MAINTAINERS: Add PReP maintainer
Officially take on maintainership for PReP and upgrade to Odd Fixes.
Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Alexander Graf <agraf@suse.de> Cc: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mark Wu [Mon, 31 Oct 2011 03:29:04 +0000 (11:29 +0800)]
trace: Add wildcard trace event support
A basic wildcard matching is supported in both the monitor command
"trace-event" and the events list file. That means you can enable/disable
the events having a common prefix in a batch. For example, virtio-blk trace
events could be enabled using:
trace-event virtio_blk_* on
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Gerd Hoffmann [Fri, 14 Oct 2011 09:36:43 +0000 (11:36 +0200)]
usb-hub: wakeup on attach
When attaching a new device we must send a wakeup request to the root
hub, otherwise the guest will not notice the new device in case the
usb hub is suspended.
Alon Levy [Tue, 25 Oct 2011 13:39:50 +0000 (15:39 +0200)]
qxl: create slots on post_load in vga state
RHBZ 740547
If we migrate when the device is in vga state the guest
still believes the slots are created, and will cause operations
that reference the slots, causing a "panic: virtual address out of range"
on the first of them. Easy to see by migrating in vga mode with
a driver loaded, for instance windows cmd window in full screen mode,
and then exiting vga mode back to native mode will cause said panic.
Fixed by doing the slot recreation in post_load for vga mode as well.
Note that compat does not require any changes because it creates it's
only slot by a side effect of QXL_IO_SET_MODE.
Gerd Hoffmann [Fri, 21 Oct 2011 13:59:07 +0000 (15:59 +0200)]
qxl: stride fixup
spice uses negative stride value to signal the bitmap is upside down.
The qxl renderer (used for scl, vnc and screenshots) wants a positive
value because it is easier to work with. The positive value is then
stored in the very same variable, which has the drawback that the
upside-down test works only once. Fix by using two variables.
$ MALLOC_PERTURB_=234 qemu-system-x86_64 -vnc :0,acl,sasl [...]
QEMU 0.15.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username fred allow
acl: added rule at position 1
(qemu) acl_reset vnc.username
Segmentation fault (core dumped)
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
C99 7.15.1: Each invocation of the va_start and va_copy macros shall
be matched by a corresponding invocation of the va_end macro in the
same function.
Spotted by Coverity. Harmless on the (common) systems where va_end()
does nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-queue: Introduce QLIST_INSERT_HEAD_RCU and dummy RCU wrappers.
SynthFS needs a QLIST_INSERT_HEAD_RCU to make sure list instructions are not
re-ordered and therefore avoiding a crash. There may be parallel readers which
should be allowed for lock-free access and this variant allows us to get rid
of rwlocks used by readers.
SynthFS is a special case where we dont really need full RCU capabilities as
it doesnt allow list entry deletion but concurrent readers/writers and
instruction re-ordering should not result in a crash.
Also, once the real rcu is available, dummy rcu macro definitions will go away
and the code will still work as expected.
This patchwork is based on inputs from Paolo Bonzini.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
hw/9pfs: Add synthetic file system support using 9p
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
M. Mohan Kumar [Tue, 25 Oct 2011 06:40:39 +0000 (12:10 +0530)]
hw/9pfs: Read-only support for 9p export
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
configure: Update configure so that open_by_handle_at check returns correct value
According to David Gibson for some compiler/libc combinations, open_by_handle_at
test in configure isn't quite right: because the file_handle pointer is never
dereferenced, gcc doesn't complain even if it is undefined. Change the test
as suggested by him.
Mathieu Sonet [Fri, 28 Oct 2011 09:55:37 +0000 (10:55 +0100)]
Add AACI audio playback support to the ARM Versatile/PB platform
This driver emulates the ARM AACI interface (PL041) connected to a LM4549 codec.
It enables audio playback for the Versatile/PB platform.
Limitations:
- Supports only a playback on one channel (Versatile/Vexpress)
- Supports only one TX FIFO in compact-mode or non-compact mode.
- Supports playback of 12, 16, 18 and 20 bits samples.
- Record is not supported.
- The PL041 is hardwired to a LM4549 codec.
Versatile/PB test build:
linux-2.6.38.5
buildroot-2010.11
alsa-lib-1.0.22
alsa-utils-1.0.22
mpg123-0.66
Qemu host: Ubuntu 10.04 in Vmware/OS X
Playback tested successfully with speaker-test/aplay/mpg123.
Signed-off-by: Mathieu Sonet <contact@elasticsheep.com>
[Peter Maydell: fixed typo in code clearing SL1RXBUSY/SL2RXBUSY
bits, as spotted by Andrzej Zaborowski] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
David Gibson [Sun, 30 Oct 2011 17:16:46 +0000 (17:16 +0000)]
pseries: Add partial support for PCI
This patch adds a PCI bus to the pseries machine. This instantiates
the qemu generic PCI bus code, advertises a PCI host bridge in the
guest's device tree and implements the RTAS methods specified by PAPR
to access PCI config space. It also sets up the memory regions we
need to provide windows into the PCI memory and IO space, and
advertises those to the guest.
However, because qemu can't yet emulate an IOMMU, which is mandatory on
pseries, PCI devices which use DMA (i.e. most of them) will not work with
this code alone. Still, this is enough to support the virtio_pci device
(which probably _should_ use emulated PCI DMA, but is specced to use
direct hypervisor access to guest physical memory instead).
[agraf] remove typedef which could cause compile errors
Signed-off-by: Alexey Kardashevskiy <aik@au1.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Sun, 30 Oct 2011 15:51:24 +0000 (15:51 +0000)]
ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate
The CPU state contains two bitmaps, initialized from the CPU spec
which describes which instructions are implemented on the CPU. A
couple of bits are defined which cover instructions (VSX and DFP)
which are not currently implemented in TCG. So far, these are only
used to handle the case of -cpu host because a KVM guest can use
the instructions when the host CPU supports them.
However, it's a mild layering violation to simply not include those
bits in the CPU descriptions for those CPUs that do support them,
just because we can't handle them in TCG. This patch corrects the
situation, so that the instruction bits _are_ shown correctly in the
cpu spec table, but are masked out from the cpu state in the non-KVM
case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Thu, 27 Oct 2011 15:56:31 +0000 (15:56 +0000)]
pseries: Allow writes to KVM accelerated TCE table
Sufficiently recent kernels include a KVM call to accelerate use of
PAPR TCE tables (IOMMU), which are used by PAPR virtual IO devices.
This involves qemu mapping the TCE table in from a kernel obtained fd,
which currently we do with PROT_READ only. This is a hangover from
early (never released) versions of this kernel interface which only
permitted read-only mappings and required us to destroy and recreate
the table when we needed to clear it from qemu.
Now, the kernel permits read-write mappings, and we rely on this to
clear the table in spapr_vio_quiesce_one(). However, due to
insufficient testing, I forgot to update the actual mapping of the
table in kvmppc_create_spapr_tce() to add PROT_WRITE to the mmap().
This patch corrects the oversight.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Mon, 24 Oct 2011 18:43:22 +0000 (20:43 +0200)]
KVM: PPC: Override host vmx/vsx/dfp only when information known
The -cpu host feature tries to find out the host capabilities based
on device tree information. However, we don't always have that available
because it's an optional property in dt.
So instead of force unsetting values depending on an unreliable source
of information, let's just try to be clever about it and not override
capabilities when we don't know the device tree pieces.
This fixes altivec with -cpu host on YDL PowerStations.
Reported-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 17 Oct 2011 18:15:41 +0000 (18:15 +0000)]
pseries: Correct vmx/dfp handling in both KVM and TCG cases
Currently, when KVM is enabled, the pseries machine checks if the host
CPU supports VMX, VSX and/or DFP instructions and advertises
accordingly in the guest device tree. It does this regardless of what
CPU is selected on the command line. On the other hand, when in TCG
mode, it never advertises any of these facilities, even basic VMX
(Altivec) which is supported in TCG.
Now that we have a -cpu host option for ppc, it is fairly
straightforward to fix both problems. This patch changes the -cpu
host code to override the basic cpu spec derived from the PVR with
information queried from the host avout VMX, VSX and DFP capability.
The pseries code then uses the instruction availability advertised in
the cpu state to set the guest device tree correctly for both the KVM
and TCG cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Tue, 18 Oct 2011 00:10:36 +0000 (02:10 +0200)]
PPC: Fail configure when libfdt is not available
We have several targets in the PPC tree now that basically require libfdt
to function properly, namely the pseries and the e500 targets. This dependency
will rather increase than decrease in the future, so I want to make sure
that people building shiny new 1.0 actually have libfdt installed to get
rid of a few ifdefs in the code.
Warning: This patch will likely make configure fail for people who don't
select their own --target-list, but don't have libfdt development packages
installed. However, we really need this new dependency to move on.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- no paranthesis
- no fdt check for config_pseries
- add . in error message
David Gibson [Sun, 16 Oct 2011 19:26:17 +0000 (19:26 +0000)]
ppc: Avoid decrementer related kvm exits
In __cpu_ppc_store_decr(), we set up a regular timer used to trigger
decrementer interrupts. This is necessary to implement the decrementer
properly under TCG, but is unnecessary under KVM (true for both Book3S-PR
and Book3S-HV KVM variants), because the kernel handles generating and
delivering decrementer exceptions.
Under kvm, in fact, the timer causes expensive and unnecessary exits from
kvm to qemu. This patch, therefore, disables setting the timer when kvm
is in use.
Signed-off-by: Anton Blanchard <anton@au1.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
Alexander Graf [Tue, 18 Oct 2011 00:00:51 +0000 (02:00 +0200)]
PPC: Disable non-440 CPUs for ppcemb target
The sole reason we have the ppcemb target is to support MMUs that have
less than the usual 4k possible page size. There are very few of these
chips and I don't want to add additional QA and testing burden to everyone
to ensure that code still works when TARGET_PAGE_SIZE is not 4k.
So this patch disables all CPUs except for MMU_BOOKE capable ones from
the ppcemb target.
projects / qemu.git / log