]>
Commit | Line | Data |
---|---|---|
832b75ed GG |
1 | smartmontools NEWS |
2 | ------------------ | |
6b80b4d2 | 3 | $Id: NEWS 4176 2015-11-22 16:45:30Z chrfranke $ |
832b75ed GG |
4 | |
5 | The most up-to-date version of this file is: | |
3d17a85c | 6 | http://sourceforge.net/p/smartmontools/code/HEAD/tree/trunk/smartmontools/NEWS |
2127e193 | 7 | |
6b80b4d2 JD |
8 | Date <Not released yet, please try current SVN or daily builds> |
9 | Summary: smartmontools release 6.5 | |
10 | ----------------------------------------------------------- | |
11 | - SAT: Improved heuristics to detect bogus sense data from SAT layer. | |
12 | - configure options '--disable-drivedb', '--enable-savestates', | |
13 | '--enable-attributelog' and '--with-docdir' are no longer supported. | |
14 | - autoconf < 2.60 and automake < 1.10 are no longer supported. | |
15 | - Drive database file now also includes the DEFAULT setting | |
16 | for each attribute. | |
17 | - HDD, SSD and USB additions to drive database. | |
18 | - Darwin: New support files for package installer. | |
19 | New makefile target 'install-darwin' builds DMG image. | |
20 | - Solaris: Auto detection of SATA devices behind SAT layer. | |
21 | - Solaris SPARC: Legacy ATA support disabled by default. | |
22 | New configure option '--with-solaris-sparc-ata' enables it. | |
23 | File os_solaris_ata.s is no longer included in source tarball. | |
24 | - Windows: Auto detection of USB devices specified by drive letter. | |
25 | - Windows: New application manifests indicating Win 10 support. | |
26 | - Windows installer: Defaults to 64-bit version on 64-bit Windows. | |
27 | ||
293b5ab8 JD |
28 | Date 2015-06-04 |
29 | Summary: smartmontools release 6.4 | |
30 | ----------------------------------------------------------- | |
31 | - Device type '-d usbprolific' for Prolific PL2571/277x USB bridges. | |
32 | - SAT: Support for ATA registers returned in fixed format sense data. | |
33 | - smartctl '-i' and '--identify': ATA ACS-4 and SATA 3.2 enhancements. | |
34 | - smartctl '-l xerror': Support for logs with more than 255 pages. | |
35 | - smartctl '-l devstat': Prints ACS-3 DSN flags. | |
36 | - smartctl '-l devstat': Read via SMART command if GP log is not | |
37 | available. | |
38 | - smartctl '-l scttempsts': Prints SCT SMART STATUS (ACS-4) and | |
39 | vendor specific SCT bytes. | |
40 | - configure option '--with-systemdenvfile=auto' as new default. | |
41 | - configure options '--disable-drivedb', '--enable-savestates' | |
42 | and '--enable-attributelog' are deprecated. | |
43 | - Corresponding '--with-*' options are enhanced accordingly. | |
44 | - Configure option '--with-docdir' is deprecated. | |
45 | - autoconf < 2.60 and automake < 1.10 are deprecated. | |
46 | (all of the above still work but a warning is printed if used) | |
47 | - HDD, SSD and USB additions to drive database. | |
48 | - Linux: AACRAID fixes, SMART STATUS should work now. | |
49 | - Linux: '/dev/megaraid_sas_ioctl_node' fd leak fix. | |
50 | - Darwin: '-S' command implemented, '-l devstat' should work now. | |
51 | - Cygwin: Compile fix. | |
52 | - Windows: Device type '-d aacraid' for AACRAID controllers. | |
53 | - Windows: SAT autodetection based on IOCTL_STORAGE_QUERY_PROPERTY. | |
54 | - Windows installer: Fix possible loss of user PATH environment variable. | |
d2e702cf GI |
55 | |
56 | Date 2014-07-26 | |
57 | Summary: smartmontools release 6.3 | |
58 | ----------------------------------------------------------- | |
59 | - smartctl: Fixed bogus error messages from '-g/-s wcreorder'. | |
60 | - smartctl prints ATA form factor. | |
61 | - SCSI: Improved support of modern disks (SAS SSDs). | |
62 | - SCSI: Fixed sense data noise from old disks. | |
63 | - update-smart-drivedb man page. | |
64 | - configure option '--with-smartdscriptdir'. | |
65 | - configure option '--with-smartdplugindir'. | |
66 | - configure option '--with-systemdenvfile'. | |
67 | - configure option '--with-working-snprintf'. | |
68 | - Removed build time stamps to support reproducible builds. | |
69 | - Compile fixes for C++11. | |
70 | - HDD, SSD and USB additions to drive database. | |
71 | - Linux: Support for controllers behind AACRAID driver. | |
72 | - Linux: Fixed DEVICESCAN max path count. | |
73 | - FreeBSD: Fixed possible crash caused by wrong SCSI error handling. | |
74 | - FreeBSD: Compile fix for kFreeBSD. | |
75 | - Windows: Reworked CSMI port scanning. | |
76 | - QNX: Compile fix. | |
77 | ||
3d17a85c | 78 | Date 2013-07-26 |
ee38a438 GI |
79 | Summary: smartmontools release 6.2 |
80 | ----------------------------------------------------------- | |
3d17a85c GI |
81 | - smartctl: Added ATA write cache reordering control using |
82 | '-g wcreorder' and '-s wcreorder,[on|off]' options. | |
83 | - update-smart-drivedb: Updated for new SVN repository. | |
84 | - HDD, SSD and USB additions to drive database. | |
85 | - Areca RAID support: Fixed possible segfault on empty port. | |
86 | - HPT RAID support: Maximum disk number increased to 128. | |
87 | - Linux: RHEL 9 compile fixes. | |
88 | - FreeBSD: Device scanning now skips port multipliers. | |
ee38a438 | 89 | - Cygwin: 64-bit compile fixes. |
3d17a85c GI |
90 | - Windows: Fixed bogus temp file name in smartd_warning.cmd |
91 | (already included in smartmontools-6.1-2.win32-setup.exe). | |
92 | - Windows: smartd service is no longer installed as interactive. | |
ee38a438 GI |
93 | |
94 | Date 2013-03-16 | |
95 | Summary: smartmontools release 6.1 | |
96 | ----------------------------------------------------------- | |
97 | - smartctl '-l directory': improved output format. | |
98 | - smartctl: Fix parsing of '-l select,cont+SIZE' option. | |
99 | - smartctl prints ATA Additional Product Id (OEM Id). | |
100 | - smartctl '-s/-g wcache' for SCSI devices to control write cache. | |
101 | - smartctl '-s/-g rcache' for SCSI devices to control read cache. | |
102 | - smartctl prints more info for SCSI devices: media rotation rate, | |
103 | form factor, physical block size, lowest LBA alignement, | |
104 | logical block provisioning, disk protection type | |
105 | and selftest progress status. | |
106 | - smartctl '--identify' updated for latest ATA ACS-3 spec. | |
107 | - smartd runs /etc/smartd_warning.sh to generate warning emails | |
108 | (Windows: smartd_warning.cmd). | |
109 | - smartd '-w PATH' option to specify this executable. | |
110 | - smartd '-d ignore' directive. | |
111 | - smartd DEVICESCAN ignores devices already specified. | |
112 | - smartd: added support for state persistence ('-s') and attribute logging | |
113 | ('-A') for SCSI devices. | |
114 | - smartd '-W' directive uses ATA attribute 190 if 194 is missing. | |
115 | - Support of larger SCSI defect lists via READ DEFECT(12). | |
116 | - Device type '-d usbjmicron,p' for Prolific USB bridges. | |
117 | - Many HDD, SSD and USB additions to drive database. | |
118 | - Linux: Support for SAS disks behind Areca controllers. | |
119 | - Linux: Improved support for SATA disks on LSI/Megaraid controllers | |
120 | - Linux: disks on MegaRaid controllers are automatically scanned | |
121 | - FreeBSD: Support for SAS disks behind Areca controllers. | |
122 | - FreeBSD: Enhanced ATA command support for 3ware. | |
123 | - FreeBSD: Support for 3ware 9750 (/dev/twsX). | |
124 | - FreeBSD: Fixed support for 48-bit ATA commands on legacy controllers | |
125 | with ATACAM driver. | |
126 | - FreeBSD: Improved support for SAS/SCSI disks on LSI/Megaraid controllers. | |
127 | - Windows: smartd.conf '-M exec' supports path names with spaces. | |
128 | - Windows: Tool wtssendmsg.exe to handle smartd.conf '-m console'. | |
129 | - Windows: DEVICESCAN now supports up to 128 drives. | |
130 | - Windows: smartctl.exe and smartd.exe include VERSIONINFO resource. | |
131 | - Windows: smartd.exe includes MESSAGETABLE resource. | |
132 | - Windows: syslogevt.exe is no longer provided. | |
133 | ||
134 | Date 2012-10-10 | |
135 | Summary: smartmontools release 6.0 | |
136 | ----------------------------------------------------------- | |
137 | - option/directive '-F nologdir' and '-F xerrorlba'. | |
138 | - smartctl '--identify' option. | |
139 | - smartctl prints nominal media rotation rate (ATA). | |
140 | - smartctl prints SATA version and speed. | |
141 | - smartctl '-l sataphy' works for CD/DVD drives also. | |
142 | - smartctl '-x' includes ATA Device Statistics. | |
143 | - smartd warning emails include device identify info. | |
144 | - smartd '-d' output is flushed to support redirection. | |
145 | - HDD, SSD and USB additions to drive database. | |
146 | - Windows smartd: smartd.conf directives '-m console', | |
147 | '-m active', '-m connected'. | |
148 | - Windows: Support for SAS disks behind Areca controllers. | |
149 | - Windows: Win9x/ME and NT4 are no longer supported. | |
150 | ||
151 | Date 2012-06-30 | |
d008864d GI |
152 | Summary: smartmontools release 5.43 |
153 | ----------------------------------------------------------- | |
154 | - smartctl options '-g, --get' and '-s, --set' to get/set | |
155 | various ATA settings: AAM, APM, Read look-ahead, Write | |
156 | cache, Security (freeze), Standby mode/timer. | |
157 | - smartd directive '-e' to set (most of) the above settings | |
158 | on startup. | |
e165493d | 159 | - smartctl options '-f hex' and '-f hex,[id|val]'. |
d008864d GI |
160 | - smartctl does not start ATA self-test if another test is |
161 | already running. Override with new option '-t force'. | |
162 | - smartctl supports extended self-test polling times | |
163 | greater than 255 minutes. | |
f4e463df | 164 | - Controller-independent SAT detection: '-d sat,auto[+TYPE]'. |
d008864d | 165 | - smartd.conf DEFAULT directive. |
f4e463df | 166 | - Many HDD, SSD and USB additions to drive database. |
ee38a438 GI |
167 | - Linux and FreeBSD: Support for SATA disks behind Areca SAS |
168 | RAID controllers and HP Smart Array controllers. | |
f4e463df | 169 | - Windows: Support for SATA disks behind Areca controllers. |
d008864d GI |
170 | - Windows smartd: directives '-l offlinests,ns' and |
171 | '-l selfteststs,ns'. | |
f4e463df | 172 | - Windows installer: Combined 32-/64-bit support. |
d008864d GI |
173 | - FreeBSD: fixed crash on SCSI devices with FreeBSD9-RC1 |
174 | ||
175 | Date 2011-10-20 | |
176 | Summary: smartmontools release 5.42 | |
177 | ----------------------------------------------------------- | |
178 | - smartctl option '-l devstat' (Device Statistics). | |
179 | - smartctl option '-l ssd' (SSD endurance indicator). | |
180 | - smartd logs identify information of each SCSI/SAS device. | |
181 | - smartd resends warning emails if problem reappears. | |
182 | - smartd directives '-l offlinests' and '-l selfteststs'. | |
183 | - Many HDD, SSD and USB additions to drive database. | |
184 | - Platform-specific man pages. | |
185 | - smartd.8 man page no longer includes smartd.conf.5. | |
186 | - FreeBSD: Compilation fixes. | |
187 | - FreeBSD: Support for Areca controllers. | |
188 | - FreeBSD: Fix '-l scterc' support. | |
189 | - FreeBSD: Support for 48-bit ATA commands. | |
190 | - Linux: Support for Areca controllers enhanced. | |
191 | - Windows installer: UAC support. | |
192 | - Windows: update-smart-drivedb /S(ilent) option. | |
193 | - Windows: improved USB ID detection. | |
194 | ||
a7e8ffec | 195 | Date 2011-06-09 |
cfbba5b9 GI |
196 | Summary: smartmontools release 5.41 |
197 | ----------------------------------------------------------- | |
198 | - Failed self-tests outdated by a newer successful extended | |
199 | self-test are no longer reported as errors. | |
a7e8ffec | 200 | - Support for ATA Long Logical/Physical Sectors (LLS/LPS). |
cfbba5b9 | 201 | - 'smartctl --scan-open' can create a draft smartd.conf. |
a7e8ffec GI |
202 | - smartctl prints World Wide Name (WWN) of ATA device. |
203 | - smartctl option '-f brief' to select new attribute output | |
204 | format which includes more flags and fits in 80 columns. | |
205 | - smartd logs identify information and WWN of each ATA device. | |
cfbba5b9 | 206 | - smartd logs warning from drive database if present. |
a7e8ffec | 207 | - smartd logs changes of offline data collection status. |
cfbba5b9 GI |
208 | - smartd directive '-l scterc,READTIME,WRITETIME'. |
209 | - smartd preserves last scheduled selective self-tests span. | |
a7e8ffec GI |
210 | - 'smartd.service' file for systemd. |
211 | - configure option '--with-systemdsystemunitdir' | |
cfbba5b9 | 212 | - configure option '--with-exampledir'. |
a7e8ffec | 213 | - configure searches for init.d or rc.d directory. |
cfbba5b9 GI |
214 | - 'make install' does no longer overwrite an existing |
215 | smartd.conf file. | |
216 | - 'update-smart-drivedb' does no longer require GNU sed. | |
a7e8ffec GI |
217 | - Many HDD, SSD and USB additions to drive database. |
218 | - Linux USB autodetection: Enable '-d sat,16' for newer kernels. | |
cfbba5b9 GI |
219 | - Linux megaraid: Fix segfault on non-data SCSI commands. |
220 | - Linux megaraid: Fix pass-through of non-data ATA commands. | |
221 | - FreeBSD: Use 'fetch' in 'update-smart-drivedb'. | |
222 | - OpenBSD: Use 'ftp' in 'update-smart-drivedb'. | |
223 | - OpenBSD: Workaround for shell bug. | |
224 | - OpenBSD: Fix DEVICESCAN for OpenBSD >= 4.8. | |
a7e8ffec | 225 | - Windows: Experimental support for Intel ICHxR RAID. |
cfbba5b9 GI |
226 | - Windows: DEVICESCAN includes USB devices. |
227 | - Windows: Faster USB ID detection. | |
228 | - Windows: update-smart-drivedb tool. | |
a7e8ffec GI |
229 | - Windows installer: Option '/SO component,...'. |
230 | - Windows: Fix smartd warning email truncation on Win7. | |
231 | - Windows installer: Fix shortcut removal on Vista/Win7. | |
cfbba5b9 GI |
232 | - Windows: Add missing quotes in smartctl-run.bat and |
233 | smartd-run.bat | |
234 | ||
235 | Date 2010-10-16 | |
a23d5117 GI |
236 | Summary: smartmontools release 5.40 |
237 | ----------------------------------------------------------- | |
7f0798ef | 238 | - Other config entries may precede smartd DEVICESCAN. |
a23d5117 GI |
239 | - Option '-v' allows to specify byte order of attribute raw value |
240 | - configure: New default value for '--with-docdir'. | |
cfbba5b9 GI |
241 | - configure: '--enable-drivedb' is now the default. |
242 | - Improved support for Intel SSDs. | |
243 | - Improved support for SandForce based SSDs. | |
a23d5117 GI |
244 | - Drive database is in a separate source file 'drivedb.h' |
245 | which can be downloaded from SVN. | |
e9583e0c | 246 | - USB ID info is now included in 'drivedb.h'. |
cfbba5b9 | 247 | - Many additions to drive database. |
7f0798ef | 248 | - New script 'update-smart-drivedb'. |
a23d5117 | 249 | - smartd libcap-ng support, option '-C, --capabilities'. |
e9583e0c GI |
250 | - smartd directive '-l xerror' to check Extended Comprehensive |
251 | SMART Error Log. | |
7f0798ef GI |
252 | - smartctl option '-l scterc[,...]' to get/set the |
253 | SCT Error Recovery Control time limit. | |
cfbba5b9 | 254 | - smartctl option '-t vendor,N'. |
e9583e0c | 255 | - smartctl options '--scan, --scan-open'. |
7f0798ef | 256 | - Linux: Add '/dev/sd[a-c][a-z]' to smartd DEVICESCAN. |
cfbba5b9 | 257 | - Linux: Support SATA drives on LSI 3ware 9750 controllers. |
e9583e0c | 258 | - Windows: Read 'drivedb.h' and 'smartd.conf' from exe directory. |
7f0798ef GI |
259 | - Windows: Support for 64-bit executables. |
260 | - Windows: Support for cross compilation on Linux. | |
e9583e0c | 261 | - Fix regression in smartctl option '-t select,M-N'. |
7f0798ef | 262 | - Fix SCT temperature table commands on big endian CPUs. |
cfbba5b9 GI |
263 | - Fix regression in smartd SMARTD_DEVICE and SMARTD_DEVICETYPE |
264 | environment variables. | |
a23d5117 | 265 | |
f4ebf3d1 GI |
266 | Date 2010-01-28 |
267 | Summary: smartmontools release 5.39.1 | |
268 | ----------------------------------------------------------- | |
269 | - Fix crash on kFreeBSD. | |
270 | - Fix regression in smartctl option '-q, --quietmode'. | |
271 | - Fix regression in smartd directive '-l selftest'. | |
272 | - Linux: Allow smartd 'DEVICESCAN -d sat'. | |
273 | - Linux: Fix spin-up of SATA drive if '-n standby' is used. | |
274 | - Windows: Fix parsing of 3ware 'tw_cli' output. | |
275 | ||
e9e8c2b1 | 276 | Date 2009-12-09 |
2127e193 GI |
277 | Summary: smartmontools release 5.39 (UNSTABLE/EXPERIMENTAL) |
278 | ----------------------------------------------------------- | |
279 | - Sourcecode repository moved from CVS to SVN | |
280 | - Support for USB devices with Cypress, JMicron and Sunplus USB bridges | |
bed94269 | 281 | - USB device type autodetection for some devices on Linux, Windows and FreeBSD |
d2e702cf | 282 | (http://www.smartmontools.org/wiki/Supported_USB-Devices) |
2127e193 GI |
283 | - Support for Areca controllers on Linux |
284 | - Support for MegaRAID controllers on Linux | |
285 | - Support for HighPoint RocketRAID controllers on FreeBSD | |
286 | - Support RAID controllers using /dev/pass devices on FreeBSD | |
287 | - Support CHECK_POWER_MODE and WRITE_LOG on FreeBSD | |
288 | - Support for up to 128 devices on 3ware controllers | |
289 | - smartctl option '-l xerror' to print ATA SMART Extended Comprehensive | |
290 | Error Log | |
291 | - smartctl option '-l xselftest' to print ATA SMART Extended Self-test Log | |
292 | - smartctl option '-l sataphy' to print SATA Phy Event Counters | |
bed94269 | 293 | - smartctl option '-l sasphy' to print SAS device phy information |
2127e193 | 294 | - smartctl options '-l gplog,...' and '-l smartlog,...' to print any log page |
bed94269 | 295 | - smartctl option '-x' to print all extended info if available |
2127e193 GI |
296 | - smartctl prints SCSI load/unload cycle counts |
297 | - Improve display of huge raw values of some SMART attributes | |
298 | - Option '-d sat+TYPE' to use SAT with controllers which require '-d TYPE' | |
bed94269 GI |
299 | - Option '-v ID,RAW_FORMAT,ATTR_NAME' to add new vendor specific attributes |
300 | - Support for SSD drives using 64-bit raw attributes | |
2127e193 GI |
301 | - Many additions to drive database |
302 | - New simplified syntax for drive database | |
303 | - Option '-B FILE' to read drive database from a file | |
304 | - Configure option to add drive database file to distribution | |
305 | - smartd can now handle attributes 197 and 198 with increasing raw values | |
306 | - smartd logs changes of self-test execution status | |
307 | - smartd directive '-n powermode,N' to limit the number of skipped checks | |
bed94269 | 308 | - smartd flag '!' for '-r' and '-R' directives to log changes as critical |
2127e193 | 309 | - smartd supports scheduled Selective Self-Tests |
bed94269 GI |
310 | - Self-tests scheduled during system downtime or disk standby are run after |
311 | next startup | |
312 | - smartd option '-s PREFIX' to store smartd internal state until next startup | |
313 | - smartd option '-A PREFIX' to log attributes at each check cycle | |
314 | - Configure options to enable the above by default | |
2127e193 | 315 | - Change to an object oriented interface to access ATA and SCSI devices |
eb07ddf2 | 316 | - Linux, Win32 and FreeBSD modules migrated to new interface |
2127e193 GI |
317 | - Rework of smartd data structures |
318 | - Checkin date and SVN revision and optional BUILD_INFO printed in version info | |
bed94269 | 319 | - Better support for GSmartControl on Windows |
2127e193 GI |
320 | - SELinux fixes to 3ware device node creation |
321 | - Fix CCISS file descriptor leak on FreeBSD | |
322 | - Compile fixes for Solaris and FreeBSD | |
323 | - Use getaddrinfo() instead of gethostbyname() to support IPv6 | |
324 | - C++ Support for QNX Target, already tested for QNX 6.3.2 on x86 and | |
325 | armle target | |
326 | - Additional support for Samsung MLC flash drives | |
eb07ddf2 GI |
327 | - New device type detection algorithm on FreeBSD, not based on filename |
328 | - Support for the adaX (ATA on CAM bus) devices on FreeBSD 8.0 and higher | |
832b75ed | 329 | |
34ad0c5f | 330 | Date 2008-03-10 |
1953ff6d GG |
331 | Summary: smartmontools release 5.38 (STABLE) |
332 | -------------------------------------------- | |
333 | This is a stable release of smartmontools. In addition to changes | |
334 | below, it includes: | |
34ad0c5f GG |
335 | - Libata/Marvell driver devices no longer need explicit '-d' switch |
336 | - DEVICESCAN automatically detects libata/marvell driver SATA devices | |
337 | - Fixed auto-offline/autosave support in FreeBSD | |
1953ff6d GG |
338 | - SAT device type + SCSI generic devices work properly with smartd under Linux |
339 | - Many additions to drive database | |
340 | - More portable autogen/autoconf/automake script set | |
341 | - Additional Windows IOCTL route to access SMART data | |
342 | - Some ATA-8 updates | |
343 | - Smoother CCISS compilation support in Linux | |
344 | - Dragonfly support | |
345 | - Fixed some ATA identity byte swap problems on big endian CPUs | |
346 | - Added support for the QNX operating system | |
347 | - No-fork option added to smartd | |
348 | - Improved device scanning and drive type recognition in Windows | |
349 | - 3ware support for controllers with more disks (32 max) | |
350 | - Improved Windows installer | |
351 | - Improved SMART Attribute list and descriptions | |
352 | - Fix to smartctl return codes | |
353 | - Fix to scheduled tests on Highpoint RAID controllers | |
354 | - New samsung firmware bug workaround option | |
355 | - Auto-offline and Auto-save fixed in Linux + libata | |
34ad0c5f | 356 | - Solaris: better SCSI support and support for Sun compilers AND gcc |
1953ff6d GG |
357 | - Fixed and improvements to CCISS support |
358 | - More options for SCSI temperature monitoring and history | |
359 | - Additional command line options for selective self-tests | |
360 | - Compilation fixes for various platforms. | |
361 | ||
2127e193 | 362 | See CHANGELOG for more details, or smartmontools SVN for still further |
1953ff6d GG |
363 | details. |
364 | ||
9ebc753d GG |
365 | Date 2006-12-20 |
366 | Summary: smartmontools release 5.37 (UNSTABLE/EXPERIMENTAL) | |
367 | ----------------------------------------------------------- | |
368 | This is an unstable/experimental release of smartmontools. | |
369 | It includes: | |
370 | ||
371 | - Many additions to the table of known drives | |
372 | - SAT (SCSI/ATA Translation) support | |
373 | - SCSI background scan results log | |
374 | - smartd -W directive for temperature tracking and warning | |
375 | - smartctl -n option to check power state | |
376 | - improved smartd power state logging | |
377 | - CCISS support under Linux | |
378 | - HighPoint RocketRAID support under Linux | |
379 | - 3ware RAID support under Windows | |
380 | - SPT interface for SCSI devices under Windows | |
381 | - ATA selective self test under Windows XP/2003 | |
382 | - NSIS installer support for Windows version | |
383 | - Started move from C to C++ | |
384 | - Various other improvements | |
385 | ||
386 | ||
832b75ed GG |
387 | Date 2006-04-12 |
388 | Summary: smartmontools release 5.36 (STABLE) | |
389 | ----------------------------------------------------------- | |
390 | This is a stable smartmontools release. The 5.34 version | |
391 | described just below was never officially released because | |
392 | Bruce Allen decided to wait until Linux support for | |
393 | accessing SATA devices through libata was in the official | |
394 | kernel.org sources. Changes include: | |
395 | ||
396 | - Win 2000/XP:ability to cancel drive self-tests | |
397 | - Additions to the table of known drives | |
398 | - FreeBSD support for 3ware char device interface and | |
399 | multiple 3ware cards | |
400 | - Various cygwin improvements for running as service | |
401 | - Works 'out of the box' with Linux SATA libata | |
402 | - smartd option added to list test schedules | |
403 | - smartctl option added to list part of drive database | |
404 | - various improvements for SCSI disks and logs | |
405 | ||
406 | ||
407 | Date 2005-04-19 | |
408 | Summary: smartmontools release 5.34 (STABLE) | |
409 | ----------------------------------------------------------- | |
410 | This is a stable smartmontools release. It includes: | |
411 | - OS/2 and eComStation support | |
412 | All Platforms: | |
413 | - Printing of drive family info | |
414 | - SCSI disks: output size of grown defect list | |
415 | - Added info about drive family to 'smartctl -i' output. | |
416 | - Added option ',q' for smartd '-n' directive to suppress | |
417 | 'skipping checks' message which may spin up laptop disk. | |
418 | - Added message if smartd '-n' check power mode spins up disk. | |
419 | Cygwin and Windows: | |
420 | - Added info about Windows version and service pack to banner line. | |
421 | - Added support for smartd '-n' directive for Win2000/XP. | |
422 | - Added support for READ_LOG for WinNT4 also. | |
423 | - Fixed bug that prevents display of empty logs on Win2000/XP | |
424 | - Fixed use of cached smart enabled state in 'smartctl -i' output. | |
425 | Windows: | |
426 | - Fixed bug that prevents running smartd as service on WinNT4. | |
427 | ||
428 | ||
429 | Date 2004-9-5 | |
430 | Summary: smartmontools release 5.33 (UNSTABLE/EXPERIMENTAL) | |
431 | ----------------------------------------------------------- | |
432 | This is an unstable/experimental release of smartmontools. It includes | |
433 | - support for Darwin/Mac OSX | |
434 | - support for OpenBSD | |
435 | - support for 3ware ATA RAID controllers under FreeBSD | |
436 | - support for 3ware 9500 series SATA RAID controllers under | |
437 | Linux. Use /dev/twa[0-15] devices to access these. | |
438 | - support for 3ware character device interfaces /dev/twe[0-15] | |
439 | under Linux. This allows (for example) Selective Self-tests. | |
440 | - support for Marvell chip-set based SATA controllers under Linux. | |
441 | - smartd mail now works also under Windows (using "Blat" mailer). | |
442 | - smartd can now be run as a Windows service. | |
443 | Please report sucess/failure with these items to the | |
444 | smartmontools-support mailing list. | |
445 | ||
446 | ||
447 | Date 2004-7-5 | |
448 | Summary: smartmontools release 5.32 (STABLE) | |
449 | ----------------------------------------------------------- | |
450 | This is an stable release of smartmontools. | |
451 | Note added 2004/7/7: users building a Solaris/Intel version of the code should | |
452 | modify the 'configure' file, changing "pc-*-solaris*" on line 106 | |
453 | to read "*-pc-solaris*". Reference: | |
4d59bff9 | 454 | http://smartmontools.cvs.sourceforge.net/smartmontools/sm5/configure.in?r1=1.83&r2=1.84 |
832b75ed GG |
455 | |
456 | ||
457 | Date: 2004-5-4 | |
458 | Summary: smartmontools release 5.31 (UNSTABLE/EXPERIMENTAL) | |
459 | ----------------------------------------------------------- | |
460 | This is an unstable/experimental release of smartmontools. It includes | |
461 | several new features: | |
462 | - Windows smartd daemon | |
463 | - smartd now monitors current and pending sector counts | |
464 | - Support for ATA-7 selective self-test features (Linux/NetBSD only) | |
465 | Please report sucess/failure with this option to the smartmontools-support | |
466 | mailing list. | |
467 | ||
468 | Date: 2004-3-6 | |
469 | Summary: smartmontools release 5.30 (STABLE) | |
470 | -------------------------------------------- | |
471 | This is a stable release of smartmontools: the first stable release | |
472 | since 5.26. | |
473 | - KNOWN BUG (identified/fixed by CF): smartd will segv and crash if | |
474 | the configuration file /etc/smartd.conf contains NO valid entries. | |
475 | This bug was introduced in version 1.259 of smartd.c by BA and | |
476 | is present in smartmontools releases 5.27-5.30 inclusive. This can | |
477 | be fixed by editing line 3165 of smartd.c, and changing: | |
478 | "else if (cfgentries[0]) {" | |
479 | to read: | |
480 | "else if (cfgentries && cfgentries[0]) {" | |
481 | ||
482 | ||
483 | Date: 2004-2-24 | |
484 | Summary: smartmontools release 5.29 (Experimental, not STABLE) | |
485 | -------------------------------------------------------------- | |
486 | This is another experimental release, to replace the 5.27 release that | |
487 | had a damaged configure script. The next stable release will be 5.30 | |
488 | - This release has SCSI support for NetBSD | |
489 | ||
490 | ||
491 | Date: 2004-2-12 | |
492 | Summary: smartmontools release 5.27 (Experimental, not STABLE) | |
493 | -------------------------------------------------------------- | |
494 | - WARNING: this release has a broken --prefix=/a/path option to the | |
495 | configure script. The consequence is that smartd will not look for the | |
496 | configuration file (smartd.conf) at the desired location. | |
497 | - NetBSD support added | |
498 | - A new Directive (-s) for smartd.conf now enables flexible automatic | |
499 | scheduled self-testing for both ATA and SCSI devices. | |
500 | - Solaris now has ATA device support (SPARC only) | |
501 | - A new Directive (-n) for smartd.conf to avoid spinning up disks | |
502 | - Errors when smartd sends mail are now logged to SYSLOG | |
503 | - Solaris smartd mail now works correctly (uses mailx not mail) | |
504 | ||
505 | ||
506 | Date: 2003-11-29 | |
507 | Summary: smartmontools release 5.26 | |
508 | ----------------------------------- | |
509 | This is a stable smartmontools release. The only known problem is | |
510 | that under Solaris, the email features of smartd do not work 'out of | |
511 | the box'. Three workarounds are: | |
512 | [1] use '-M exec mailx' in /etc/smartd.conf | |
513 | [2] in the start script for smartd, put /usr/ucb into PATH before | |
514 | /bin | |
515 | [3] upgrade to release 5.27 or later, or the latest CVS snapshot | |
516 | ||
517 | ||
518 | Date: 2003-11-19 | |
519 | Summary: smartmontools release 5.25 | |
520 | ----------------------------------- | |
521 | This release should not hang when accessing USB devices. It provides | |
522 | smartd SCSI self-test log monitoring for self-test errors, and a | |
523 | larger table of known ATA drives. DEVICESCAN should work correctly | |
524 | even on file systems containing XFS or JFS partitions, and on machines | |
525 | that use devfs, even without traditional links. | |
526 | ||
527 | From this time on, even numbered releases will be 'stable' ones and | |
528 | odd numbered releases (like 5.25) will be unstable/testing/development | |
529 | releases. | |
530 | ||
531 | ||
532 | Date: 2003-10-30 | |
533 | Summary: smartmontools release 5.23 | |
534 | ----------------------------------- | |
535 | This release has one known problem: DEVICESCAN device scanning does | |
536 | not work correctly if the disk with the /dev directory also has XFS | |
537 | or JFS file systems on it. | |
538 | ||
539 | ||
540 | Date: 2003-10-28 | |
541 | Summary: smartmontools release 5.22 | |
542 | ----------------------------------- | |
543 | Replaces flawed 5.21 release: the -T verypermissive option had to be | |
544 | entered as -T verpermissive. First experimental solaris support (SCSI | |
545 | only). This release had a serious flaw: smartd left open file descriptors | |
546 | for devices that it couldn't monitor. | |
547 | ||
548 | ||
549 | Date: 2003-10-14 | |
550 | Summary: smartmontools release 5.21 | |
551 | ----------------------------------- | |
552 | Preliminary support for FreeBSD added to smartmontools. For FreeBSD, | |
553 | ATA support requires a 5.1-CURRENT kernel while SCSI support should | |
554 | work across multiple versions (any that support CAM). | |
555 | ||
556 | ||
557 | Date: 2003-10-04 | |
558 | Summary: smartmontools release 5.20 | |
559 | ----------------------------------- | |
560 | Replaces flawed 5.19 release (which had a zero-length man page | |
561 | smartd.conf.5). | |
562 | ||
563 | ||
564 | Date: 2003-10-03 | |
565 | Summary: smartmontools release 5.19 | |
566 | ----------------------------------- | |
567 | This is the first release of smartmontools based on autoconf/automake. | |
568 | For this reason, it is a very experimental release. Please let us | |
569 | know in particular about documenation errors/omissions, missing or | |
570 | unneccesary files, and similar oversights. The major changes are: | |
571 | [1] installation scripts based on autoconfig/automake | |
572 | [2] ./configure [options] lets you set arbitrary paths | |
573 | [3] supports FHS with ./configure --prefix=/usr/local | |
574 | [4] correct paths are inserted into all man pages, binaries, etc. | |
575 | [5] tarballs and RPMs are now GPG-signed | |
576 | ||
577 | ||
578 | Date: 2003-10-02 11:35 | |
579 | Summary: smartd SEGV | |
580 | -------------------- | |
581 | Some versions of smartd, including smartmontools release 5.1-18, will | |
582 | SEGV if the combination of Directives in /etc/smartd.conf contains | |
583 | -l error | |
584 | AND/OR | |
585 | -l selftest | |
586 | without any Attribute monitoring Directives. This is fixed in 5.19 | |
587 | and above. | |
588 | ||
589 | A good workaround is to add: | |
590 | -o on | |
591 | OR | |
592 | -o off | |
593 | to enable or disable automatic offline data collection. | |
594 | ||
595 | ||
596 | Date: 2002-11-17 07:41 | |
597 | Summary: testunitready bug in smartd | |
598 | ------------------------------------ | |
599 | A bug in smartd prevented functioning on scsi devices. | |
600 | The bug in question only affects smartd users with scsi devices. | |
601 | To see if your version of smartd has the testunitready() bug, do | |
602 | smartd -V | |
603 | If the version of the module smartd.c in a line like: | |
604 | Module: smartd.c revision: 1.66 date: 2002/11/17 | |
605 | has a revision greater than or equal to 1.30, and less than or | |
606 | equal to 1.64, then your version of the code has this problem. | |
607 | ||
608 | This problem affected releases starting with RELEASE_5_0_16 up to and | |
609 | including RELEASE_5_0_43. |