]>
Commit | Line | Data |
---|---|---|
832b75ed GG |
1 | #! /bin/sh |
2 | ||
3 | # smartmontools init file for smartd | |
34ad0c5f GG |
4 | # Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net> |
5 | # $Id: smartd.initd.in,v 1.38 2008/03/04 22:09:47 ballen4705 Exp $ | |
832b75ed GG |
6 | |
7 | # For RedHat and cousins: | |
8 | # chkconfig: 2345 40 40 | |
9 | # description: Self Monitoring and Reporting Technology (SMART) Daemon | |
10 | # processname: smartd | |
11 | ||
12 | # For SuSE and cousins | |
13 | ### BEGIN INIT INFO | |
34ad0c5f GG |
14 | # Provides: smartd |
15 | # Required-Start: $syslog | |
832b75ed | 16 | # X-UnitedLinux-Should-Start: $sendmail |
34ad0c5f GG |
17 | # Should-Start: $sendmail |
18 | # Required-Stop: $syslog | |
832b75ed | 19 | # X-UnitedLinux-Should-Stop: |
34ad0c5f | 20 | # Default-Start: 2 3 5 |
832b75ed | 21 | # Default-Stop: |
34ad0c5f GG |
22 | # Short-Description: Monitors disk and tape health via S.M.A.R.T. |
23 | # Description: Start S.M.A.R.T. disk and tape monitor. | |
832b75ed GG |
24 | ### END INIT INFO |
25 | ||
26 | # This program is free software; you can redistribute it and/or modify it | |
27 | # under the terms of the GNU General Public License as published by the Free | |
28 | # Software Foundation; either version 2, or (at your option) any later | |
29 | # version. | |
30 | # You should have received a copy of the GNU General Public License (for | |
31 | # example COPYING); if not, write to the Free Software Foundation, Inc., 675 | |
32 | # Mass Ave, Cambridge, MA 02139, USA. | |
33 | # This code was originally developed as a Senior Thesis by Michael Cornwell | |
34 | # at the Concurrent Systems Laboratory (now part of the Storage Systems | |
35 | # Research Center), Jack Baskin School of Engineering, University of | |
36 | # California, Santa Cruz. http://ssrc.soe.ucsc.edu/. | |
37 | ||
38 | # Uncomment the line below to pass options to smartd on startup. | |
39 | # Note that distribution specific configuration files like | |
40 | # /etc/{default,sysconfig}/smartmontools might override these | |
41 | #smartd_opts="--interval=1800" | |
42 | ||
43 | SMARTD_BIN=/usr/local/sbin/smartd | |
44 | ||
45 | report_unsupported () { | |
46 | echo "Currently the smartmontools package has no init script for" | |
47 | echo "the $1 OS/distribution. If you can provide one or this" | |
48 | echo "one works after removing some ifdefs, please contact" | |
49 | echo "smartmontools-support@lists.sourceforge.net." | |
50 | exit 1 | |
51 | } | |
52 | ||
53 | # Red Hat or Yellow Dog or Mandrake | |
54 | if [ -f /etc/redhat-release -o -f /etc/yellowdog-release -o -f /etc/mandrake-release -o -f /etc/whitebox-release -o -f /etc/trustix-release -o -f /etc/tinysofa-release ] ; then | |
55 | ||
56 | # Source function library | |
57 | . /etc/rc.d/init.d/functions | |
58 | ||
59 | # Source configuration file. This should define the shell variable smartd_opts | |
60 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
61 | ||
62 | RETVAL=0 | |
63 | ||
64 | prog=smartd | |
65 | ||
66 | case "$1" in | |
67 | start) | |
68 | echo -n $"Starting $prog: " | |
69 | daemon $SMARTD_BIN $smartd_opts | |
70 | touch /var/lock/subsys/smartd | |
71 | echo | |
72 | ;; | |
73 | stop) | |
74 | echo -n $"Shutting down $prog: " | |
75 | killproc $SMARTD_BIN | |
76 | rm -f /var/lock/subsys/smartd | |
77 | echo | |
78 | ;; | |
79 | reload) | |
80 | echo -n $"Reloading $prog daemon configuration: " | |
81 | killproc $SMARTD_BIN -HUP | |
82 | RETVAL=$? | |
83 | echo | |
84 | ;; | |
85 | report) | |
86 | echo -n $"Checking SMART devices now: " | |
87 | killproc $SMARTD_BIN -USR1 | |
88 | RETVAL=$? | |
89 | echo | |
90 | ;; | |
91 | restart) | |
92 | $0 stop | |
93 | $0 start | |
94 | ;; | |
95 | status) | |
96 | status $prog | |
97 | ;; | |
98 | *) | |
99 | echo $"Usage: $0 {start|stop|reload|report|restart|status}" | |
100 | RETVAL=1 | |
101 | esac | |
102 | ||
103 | exit $RETVAL | |
104 | ||
105 | # Slackware | |
106 | elif [ -f /etc/slackware-version ] ; then | |
107 | ||
108 | # Source configuration file. This should define the shell variable smartd_opts. | |
109 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
110 | # of path for Slackware. | |
111 | ||
112 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
113 | ||
114 | case "$1" in | |
115 | start) | |
116 | echo -n "Starting smartd: " | |
117 | $SMARTD_BIN $smartd_opts | |
118 | echo | |
119 | ;; | |
120 | stop) | |
121 | echo -n "Shutting down smartd: " | |
122 | killall $SMARTD_BIN | |
123 | echo | |
124 | ;; | |
125 | restart) | |
126 | $0 stop | |
127 | sleep 1 | |
128 | $0 start | |
129 | ;; | |
130 | *) | |
131 | echo "Usage: smartd {start|stop|restart}" | |
132 | exit 1 | |
133 | esac | |
134 | ||
135 | exit 0 | |
136 | ||
137 | # SuSE | |
138 | elif [ -f /etc/SuSE-release ] ; then | |
139 | test -x $SMARTD_BIN || exit 5 | |
140 | ||
141 | # Existence of config file is optional | |
142 | SMARTD_CONFIG=/etc/smartd.conf | |
143 | ||
144 | # source configuration file. This should set the shell variable smartd_opts | |
145 | [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools | |
146 | ||
147 | # Shell functions sourced from /etc/rc.status: | |
148 | # rc_check check and set local and overall rc status | |
149 | # rc_status check and set local and overall rc status | |
150 | # rc_status -v ditto but be verbose in local rc status | |
151 | # rc_status -v -r ditto and clear the local rc status | |
152 | # rc_failed set local and overall rc status to failed | |
153 | # rc_reset clear local rc status (overall remains) | |
154 | # rc_exit exit appropriate to overall rc status | |
155 | . /etc/rc.status | |
156 | ||
157 | # First reset status of this service | |
158 | rc_reset | |
159 | ||
160 | # Return values acc. to LSB for all commands but status: | |
161 | # 0 - success | |
162 | # 1 - misc error | |
163 | # 2 - invalid or excess args | |
164 | # 3 - unimplemented feature (e.g. reload) | |
165 | # 4 - insufficient privilege | |
166 | # 5 - program not installed | |
167 | # 6 - program not configured | |
168 | # | |
169 | # Note that starting an already running service, stopping | |
170 | # or restarting a not-running service as well as the restart | |
171 | # with force-reload (in case signalling is not supported) are | |
172 | # considered a success. | |
173 | case "$1" in | |
174 | start) | |
ba59cff1 | 175 | echo -n "Starting smartd " |
832b75ed GG |
176 | ## Start daemon with startproc(8). If this fails |
177 | ## the echo return value is set appropriate. | |
178 | ||
179 | # startproc should return 0, even if service is | |
180 | # already running to match LSB spec. | |
181 | startproc $SMARTD_BIN $smartd_opts | |
182 | ||
183 | # Remember status and be verbose | |
184 | rc_status -v | |
185 | ;; | |
186 | stop) | |
ba59cff1 | 187 | echo -n "Shutting down smartd " |
832b75ed GG |
188 | killproc -TERM $SMARTD_BIN |
189 | ||
190 | # Remember status and be verbose | |
191 | rc_status -v | |
192 | ;; | |
ba59cff1 GG |
193 | try-restart|condrestart) |
194 | ## Do a restart only if the service was active before. | |
195 | ## Note: try-restart is now part of LSB (as of 1.9). | |
196 | ## RH has a similar command named condrestart. | |
197 | if test "$1" = "condrestart"; then | |
198 | echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" | |
199 | fi | |
200 | $0 status | |
201 | if test $? = 0; then | |
202 | $0 restart | |
203 | else | |
204 | rc_reset # Not running is not a failure. | |
205 | fi | |
206 | # Remember status and be quiet | |
207 | rc_status | |
208 | ;; | |
209 | restart | force-reload) | |
832b75ed GG |
210 | $0 stop |
211 | $0 start | |
212 | ;; | |
ba59cff1 | 213 | reload) |
832b75ed GG |
214 | ## Like force-reload, but if daemon does not support |
215 | ## signaling, do nothing (!) | |
216 | rc_failed 3 | |
217 | rc_status -v | |
218 | ;; | |
ba59cff1 GG |
219 | status) |
220 | echo -n "Checking for service smartd " | |
832b75ed GG |
221 | ## Check status with checkproc(8), if process is running |
222 | ## checkproc will return with exit status 0. | |
223 | ||
224 | # Status has a slightly different for the status command: | |
225 | # 0 - service running | |
226 | # 1 - service dead, but /var/run/ pid file exists | |
227 | # 2 - service dead, but /var/lock/ lock file exists | |
228 | # 3 - service not running | |
229 | ||
230 | # NOTE: checkproc returns LSB compliant status values. | |
231 | checkproc $SMARTD_BIN | |
232 | rc_status -v | |
233 | ;; | |
234 | probe) | |
235 | ## Optional: Probe for the necessity of a reload, print out the | |
236 | ## argument to this init script which is required for a reload. | |
237 | ## Note: probe is not (yet) part of LSB (as of 1.2) | |
238 | ||
239 | test $SMARTD_CONFIG -nt /var/run/smartd.pid && echo reload | |
240 | ;; | |
241 | *) | |
ba59cff1 | 242 | echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}" |
832b75ed GG |
243 | exit 1 |
244 | ;; | |
245 | esac | |
246 | ||
247 | rc_exit | |
248 | ||
249 | # Debian case | |
250 | elif [ -f /etc/debian_version ] ; then | |
251 | PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin | |
252 | SMARTDPID=/var/run/smartd.pid | |
253 | [ -x $SMARTD_BIN ] || exit 0 | |
254 | RET=0 | |
255 | ||
256 | # source configuration file | |
257 | [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools | |
258 | ||
259 | smartd_opts="--pidfile $SMARTDPID $smartd_opts" | |
260 | ||
261 | case "$1" in | |
262 | start) | |
263 | echo -n "Starting S.M.A.R.T. daemon: smartd" | |
264 | if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ | |
265 | --exec $SMARTD_BIN -- $smartd_opts; then | |
266 | echo "." | |
267 | else | |
268 | echo " (failed)" | |
269 | RET=1 | |
270 | fi | |
271 | ;; | |
272 | stop) | |
273 | echo -n "Stopping S.M.A.R.T. daemon: smartd" | |
274 | start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID | |
275 | echo "." | |
276 | ;; | |
277 | restart|force-reload) | |
278 | $0 stop | |
279 | $0 start | |
280 | ;; | |
281 | *) | |
282 | echo "Usage: /etc/init.d/smartmontools {start|stop|restart|force-reload}" | |
283 | exit 1 | |
284 | esac | |
285 | exit $RET | |
286 | ||
287 | elif [ -f /etc/gentoo-release ] ; then | |
288 | report_unsupported "Gentoo" | |
289 | ||
290 | elif [ -f /etc/turbolinux-release ] ; then | |
291 | report_unsupported "Turbolinux" | |
292 | ||
293 | elif [ -f /etc/environment.corel ] ; then | |
294 | report_unsupported "Corel" | |
295 | ||
296 | # PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif | |
297 | ||
298 | elif uname -a | grep FreeBSD > /dev/null 2>&1 ; then | |
299 | # following is replaced by port install | |
300 | PREFIX=@@PREFIX@@ | |
301 | ||
302 | # Updated to try both the RCNG version of things from 5.x, or fallback to | |
303 | # oldfashioned rc.conf | |
304 | ||
305 | if [ -r /etc/rc.subr ]; then | |
306 | # This is RC-NG, pick up our values | |
307 | . /etc/rc.subr | |
308 | name="smartd" | |
309 | rcvar="smartd_enable" | |
310 | command="$SMARTD_BIN" | |
311 | load_rc_config $name | |
312 | elif [ -r /etc/defaults/rc.conf ]; then | |
313 | # Not a 5.x system, try the default location for variables | |
314 | . /etc/defaults/rc.conf | |
315 | source_rc_confs | |
316 | elif [ -r /etc/rc.conf ]; then | |
317 | # Worst case, fallback to system config file | |
318 | . /etc/rc.conf | |
319 | fi | |
320 | ||
321 | if [ -r /etc/rc.subr ]; then | |
322 | # Use new functionality from RC-NG | |
323 | run_rc_command "$1" | |
324 | else | |
325 | PID_FILE=/var/run/smartd.pid | |
326 | case "$1" in | |
327 | start) | |
328 | $SMARTD_BIN -p $PID_FILE $smartd_flags | |
329 | echo -n " smartd" | |
330 | ;; | |
331 | stop) | |
332 | kill `cat $PID_FILE` | |
333 | echo -n " smartd" | |
334 | ;; | |
335 | restart) | |
336 | $0 stop | |
337 | sleep 1 | |
338 | $0 start | |
339 | ;; | |
340 | *) | |
341 | echo "Usage: smartd {start|stop|restart}" | |
342 | exit 1 | |
343 | esac | |
344 | ||
345 | exit 0 | |
346 | fi | |
347 | elif uname -a | grep SunOS > /dev/null 2>&1 ; then | |
348 | ||
349 | # Source configuration file. This should define the shell variable smartd_opts. | |
350 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
351 | # of path for Solaris | |
352 | ||
353 | [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools | |
354 | ||
355 | PID_FILE=/var/run/smartd.pid | |
356 | ||
357 | case "$1" in | |
358 | start) | |
359 | $SMARTD_BIN -p $PID_FILE $smartd_opts | |
360 | echo -n "smartd " | |
361 | ;; | |
362 | stop) | |
363 | [ -f $PID_FILE ] && kill `cat $PID_FILE` | |
364 | echo -n "smartd " | |
365 | ;; | |
366 | restart) | |
367 | $0 stop | |
368 | sleep 1 | |
369 | $0 start | |
370 | ;; | |
371 | *) | |
372 | echo "Usage: smartd {start|stop|restart}" | |
373 | exit 1 | |
374 | esac | |
375 | ||
376 | exit 0 | |
377 | ||
378 | # Cygwin | |
379 | elif uname | grep -i CYGWIN > /dev/null 2>&1 ; then | |
380 | ||
381 | # The following settings may be changed by the configuration file below | |
382 | # Service Name (must be unique) | |
383 | smartd_svcname=smartd | |
384 | # Service display name | |
385 | smartd_svcdisp="CYGWIN smartd" | |
386 | # Service description | |
387 | smartd_svcdesc="\ | |
388 | Controls and monitors storage devices using the Self-Monitoring \ | |
389 | Analysis and Reporting Technology System (S.M.A.R.T.) \ | |
390 | built into ATA and SCSI Hard Drives. \ | |
391 | http://smartmontools.sourceforge.net/" | |
392 | ||
393 | # Source configuration file. This should define the shell variable smartd_opts. | |
394 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
395 | # of path for Cygwin | |
396 | ||
397 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
398 | ||
399 | PID_FILE=/var/run/smartd.pid | |
400 | RETVAL=0 | |
401 | ||
402 | # Note: "[ -r $PID_FILE ]" is not used here. On Cygwin, this command may | |
403 | # return success even if the file is present but cannot be read by current user. | |
404 | # If smartd is running as service, smartd.pid is owned by local system account | |
405 | # which is different from any user ever executing this script. | |
406 | ||
407 | case "$1" in | |
408 | start) | |
409 | if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then | |
410 | echo -n "Starting service $smartd_svcname: " | |
411 | cygrunsrv -S "$smartd_svcname" | |
412 | else | |
413 | echo -n "Starting smartd as daemon: " | |
414 | $SMARTD_BIN -p $PID_FILE $smartd_opts | |
415 | fi | |
416 | RETVAL=$? | |
417 | ;; | |
418 | stop) | |
419 | echo -n "Shutting down smartd: " | |
420 | pid="`cat $PID_FILE 2>/dev/null`" && kill "$pid" | |
421 | RETVAL=$? | |
422 | ;; | |
423 | reload) | |
424 | echo -n "Reloading smartd configuration: " | |
425 | pid="`cat $PID_FILE 2>/dev/null`" && kill -HUP "$pid" | |
426 | RETVAL=$? | |
427 | ;; | |
428 | report) | |
429 | echo -n "Checking SMART devices now: " | |
430 | pid="`cat $PID_FILE 2>/dev/null`" && kill -USR1 "$pid" | |
431 | RETVAL=$? | |
432 | ;; | |
433 | restart) | |
434 | $0 stop | |
435 | sleep 1 | |
436 | $0 start | |
437 | exit $? | |
438 | ;; | |
439 | install) | |
440 | shift | |
441 | [ $# -eq 0 ] || smartd_opts="$*" | |
442 | dep= | |
443 | if cygrunsrv -L 2>/dev/null | grep "^syslogd$" >/dev/null 2>&1; then | |
444 | dep="-y syslogd" | |
445 | else | |
446 | echo "Warning: syslogd service not installed, smartd will write to windows event log."; | |
447 | fi | |
448 | echo "Installing service ${smartd_svcname}${smartd_opts+ with options '$smartd_opts'}:" | |
449 | cygrunsrv -I "$smartd_svcname" -d "$smartd_svcdisp" -f "$smartd_svcdesc" $dep \ | |
a37e7145 | 450 | -e CYGWIN="$CYGWIN" -p $SMARTD_BIN -a "-n -p ${PID_FILE}${smartd_opts+ }$smartd_opts" |
832b75ed GG |
451 | RETVAL=$? |
452 | ;; | |
453 | remove) | |
454 | echo "Removing service $smartd_svcname:" | |
455 | cygrunsrv -R "$smartd_svcname" | |
456 | RETVAL=$? | |
457 | ;; | |
458 | status) | |
459 | echo -n "Checking smartd status: " | |
460 | if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then | |
461 | if cygrunsrv -Q "$smartd_svcname" 2>/dev/null | grep "State *: Running" >/dev/null 2>&1; then | |
462 | echo "running as service '$smartd_svcname'." | |
463 | elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then | |
464 | echo "installed as service '$smartd_svcname' but running as daemon." | |
465 | else | |
466 | echo "installed as service '$smartd_svcname' but not running." | |
467 | RETVAL=1 | |
468 | fi | |
469 | elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then | |
470 | echo "running as daemon." | |
471 | else | |
472 | echo "not running." | |
473 | RETVAL=1 | |
474 | fi | |
475 | exit $RETVAL | |
476 | ;; | |
477 | *) | |
478 | echo "Usage: $0 {start|stop|restart|reload|report|status}" | |
479 | echo " $0 {install [options]|remove}" | |
480 | exit 1 | |
481 | esac | |
482 | ||
483 | if [ "$RETVAL" -eq 0 ]; then echo "done"; else echo "ERROR"; fi | |
484 | exit $RETVAL | |
485 | ||
486 | # Add other OSes HERE, using elif... | |
487 | else | |
488 | report_unsupported "Unknown" | |
489 | fi | |
490 | ||
491 | # One should NEVER arrive here, except for a badly written case above, | |
492 | # that fails to exit. | |
493 | echo "SOMETHING IS WRONG WITH THE SMARTD STARTUP SCRIPT" | |
494 | echo "PLEASE CONTACT smartmontools-support@lists.sourceforge.net" | |
495 | exit 1 |