]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * ataprint.cpp | |
3 | * | |
4 | * Home page of code is: http://smartmontools.sourceforge.net | |
5 | * | |
6 | * Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net> | |
7 | * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net> | |
8 | * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org> | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2, or (at your option) | |
13 | * any later version. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * (for example COPYING); if not, write to the Free | |
17 | * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
18 | * | |
19 | * This code was originally developed as a Senior Thesis by Michael Cornwell | |
20 | * at the Concurrent Systems Laboratory (now part of the Storage Systems | |
21 | * Research Center), Jack Baskin School of Engineering, University of | |
22 | * California, Santa Cruz. http://ssrc.soe.ucsc.edu/ | |
23 | * | |
24 | */ | |
25 | ||
26 | #include "config.h" | |
27 | ||
28 | #include <ctype.h> | |
29 | #include <errno.h> | |
30 | #include <stdio.h> | |
31 | #include <stdlib.h> | |
32 | #include <string.h> | |
33 | ||
34 | #include "int64.h" | |
35 | #include "atacmdnames.h" | |
36 | #include "atacmds.h" | |
37 | #include "dev_interface.h" | |
38 | #include "ataprint.h" | |
39 | #include "smartctl.h" | |
40 | #include "utility.h" | |
41 | #include "knowndrives.h" | |
42 | ||
43 | const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3554 2012-06-01 20:11:46Z chrfranke $" | |
44 | ATAPRINT_H_CVSID; | |
45 | ||
46 | ||
47 | static const char * infofound(const char *output) { | |
48 | return (*output ? output : "[No Information Found]"); | |
49 | } | |
50 | ||
51 | // Return true if '-T permissive' is specified, | |
52 | // used to ignore missing capabilities | |
53 | static bool is_permissive() | |
54 | { | |
55 | if (!failuretest_permissive) | |
56 | return false; | |
57 | failuretest_permissive--; | |
58 | return true; | |
59 | } | |
60 | ||
61 | /* For the given Command Register (CR) and Features Register (FR), attempts | |
62 | * to construct a string that describes the contents of the Status | |
63 | * Register (ST) and Error Register (ER). The caller passes the string | |
64 | * buffer and the return value is a pointer to this string. If the | |
65 | * meanings of the flags of the error register are not known for the given | |
66 | * command then it returns NULL. | |
67 | * | |
68 | * The meanings of the flags of the error register for all commands are | |
69 | * described in the ATA spec and could all be supported here in theory. | |
70 | * Currently, only a few commands are supported (those that have been seen | |
71 | * to produce errors). If many more are to be added then this function | |
72 | * should probably be redesigned. | |
73 | */ | |
74 | ||
75 | static const char * construct_st_er_desc( | |
76 | char * s, | |
77 | unsigned char CR, unsigned char FR, | |
78 | unsigned char ST, unsigned char ER, | |
79 | unsigned short SC, | |
80 | const ata_smart_errorlog_error_struct * lba28_regs, | |
81 | const ata_smart_exterrlog_error * lba48_regs | |
82 | ) | |
83 | { | |
84 | const char *error_flag[8]; | |
85 | int i, print_lba=0, print_sector=0; | |
86 | ||
87 | // Set of character strings corresponding to different error codes. | |
88 | // Please keep in alphabetic order if you add more. | |
89 | const char *abrt = "ABRT"; // ABORTED | |
90 | const char *amnf = "AMNF"; // ADDRESS MARK NOT FOUND | |
91 | const char *ccto = "CCTO"; // COMMAND COMPLETION TIMED OUT | |
92 | const char *eom = "EOM"; // END OF MEDIA | |
93 | const char *icrc = "ICRC"; // INTERFACE CRC ERROR | |
94 | const char *idnf = "IDNF"; // ID NOT FOUND | |
95 | const char *ili = "ILI"; // MEANING OF THIS BIT IS COMMAND-SET SPECIFIC | |
96 | const char *mc = "MC"; // MEDIA CHANGED | |
97 | const char *mcr = "MCR"; // MEDIA CHANGE REQUEST | |
98 | const char *nm = "NM"; // NO MEDIA | |
99 | const char *obs = "obs"; // OBSOLETE | |
100 | const char *tk0nf = "TK0NF"; // TRACK 0 NOT FOUND | |
101 | const char *unc = "UNC"; // UNCORRECTABLE | |
102 | const char *wp = "WP"; // WRITE PROTECTED | |
103 | ||
104 | /* If for any command the Device Fault flag of the status register is | |
105 | * not used then used_device_fault should be set to 0 (in the CR switch | |
106 | * below) | |
107 | */ | |
108 | int uses_device_fault = 1; | |
109 | ||
110 | /* A value of NULL means that the error flag isn't used */ | |
111 | for (i = 0; i < 8; i++) | |
112 | error_flag[i] = NULL; | |
113 | ||
114 | switch (CR) { | |
115 | case 0x10: // RECALIBRATE | |
116 | error_flag[2] = abrt; | |
117 | error_flag[1] = tk0nf; | |
118 | break; | |
119 | case 0x20: /* READ SECTOR(S) */ | |
120 | case 0x21: // READ SECTOR(S) | |
121 | case 0x24: // READ SECTOR(S) EXT | |
122 | case 0xC4: /* READ MULTIPLE */ | |
123 | case 0x29: // READ MULTIPLE EXT | |
124 | error_flag[6] = unc; | |
125 | error_flag[5] = mc; | |
126 | error_flag[4] = idnf; | |
127 | error_flag[3] = mcr; | |
128 | error_flag[2] = abrt; | |
129 | error_flag[1] = nm; | |
130 | error_flag[0] = amnf; | |
131 | print_lba=1; | |
132 | break; | |
133 | case 0x22: // READ LONG (with retries) | |
134 | case 0x23: // READ LONG (without retries) | |
135 | error_flag[4] = idnf; | |
136 | error_flag[2] = abrt; | |
137 | error_flag[0] = amnf; | |
138 | print_lba=1; | |
139 | break; | |
140 | case 0x2a: // READ STREAM DMA | |
141 | case 0x2b: // READ STREAM PIO | |
142 | if (CR==0x2a) | |
143 | error_flag[7] = icrc; | |
144 | error_flag[6] = unc; | |
145 | error_flag[5] = mc; | |
146 | error_flag[4] = idnf; | |
147 | error_flag[3] = mcr; | |
148 | error_flag[2] = abrt; | |
149 | error_flag[1] = nm; | |
150 | error_flag[0] = ccto; | |
151 | print_lba=1; | |
152 | print_sector=SC; | |
153 | break; | |
154 | case 0x3A: // WRITE STREAM DMA | |
155 | case 0x3B: // WRITE STREAM PIO | |
156 | if (CR==0x3A) | |
157 | error_flag[7] = icrc; | |
158 | error_flag[6] = wp; | |
159 | error_flag[5] = mc; | |
160 | error_flag[4] = idnf; | |
161 | error_flag[3] = mcr; | |
162 | error_flag[2] = abrt; | |
163 | error_flag[1] = nm; | |
164 | error_flag[0] = ccto; | |
165 | print_lba=1; | |
166 | print_sector=SC; | |
167 | break; | |
168 | case 0x25: // READ DMA EXT | |
169 | case 0x26: // READ DMA QUEUED EXT | |
170 | case 0xC7: // READ DMA QUEUED | |
171 | case 0xC8: // READ DMA (with retries) | |
172 | case 0xC9: // READ DMA (without retries, obsolete since ATA-5) | |
173 | case 0x60: // READ FPDMA QUEUED (NCQ) | |
174 | error_flag[7] = icrc; | |
175 | error_flag[6] = unc; | |
176 | error_flag[5] = mc; | |
177 | error_flag[4] = idnf; | |
178 | error_flag[3] = mcr; | |
179 | error_flag[2] = abrt; | |
180 | error_flag[1] = nm; | |
181 | error_flag[0] = amnf; | |
182 | print_lba=1; | |
183 | if (CR==0x25 || CR==0xC8) | |
184 | print_sector=SC; | |
185 | break; | |
186 | case 0x30: /* WRITE SECTOR(S) */ | |
187 | case 0x31: // WRITE SECTOR(S) | |
188 | case 0x34: // WRITE SECTOR(S) EXT | |
189 | case 0xC5: /* WRITE MULTIPLE */ | |
190 | case 0x39: // WRITE MULTIPLE EXT | |
191 | case 0xCE: // WRITE MULTIPLE FUA EXT | |
192 | error_flag[6] = wp; | |
193 | error_flag[5] = mc; | |
194 | error_flag[4] = idnf; | |
195 | error_flag[3] = mcr; | |
196 | error_flag[2] = abrt; | |
197 | error_flag[1] = nm; | |
198 | print_lba=1; | |
199 | break; | |
200 | case 0x32: // WRITE LONG (with retries) | |
201 | case 0x33: // WRITE LONG (without retries) | |
202 | error_flag[4] = idnf; | |
203 | error_flag[2] = abrt; | |
204 | print_lba=1; | |
205 | break; | |
206 | case 0x3C: // WRITE VERIFY | |
207 | error_flag[6] = unc; | |
208 | error_flag[4] = idnf; | |
209 | error_flag[2] = abrt; | |
210 | error_flag[0] = amnf; | |
211 | print_lba=1; | |
212 | break; | |
213 | case 0x40: // READ VERIFY SECTOR(S) with retries | |
214 | case 0x41: // READ VERIFY SECTOR(S) without retries | |
215 | case 0x42: // READ VERIFY SECTOR(S) EXT | |
216 | error_flag[6] = unc; | |
217 | error_flag[5] = mc; | |
218 | error_flag[4] = idnf; | |
219 | error_flag[3] = mcr; | |
220 | error_flag[2] = abrt; | |
221 | error_flag[1] = nm; | |
222 | error_flag[0] = amnf; | |
223 | print_lba=1; | |
224 | break; | |
225 | case 0xA0: /* PACKET */ | |
226 | /* Bits 4-7 are all used for sense key (a 'command packet set specific error | |
227 | * indication' according to the ATA/ATAPI-7 standard), so "Sense key" will | |
228 | * be repeated in the error description string if more than one of those | |
229 | * bits is set. | |
230 | */ | |
231 | error_flag[7] = "Sense key (bit 3)", | |
232 | error_flag[6] = "Sense key (bit 2)", | |
233 | error_flag[5] = "Sense key (bit 1)", | |
234 | error_flag[4] = "Sense key (bit 0)", | |
235 | error_flag[2] = abrt; | |
236 | error_flag[1] = eom; | |
237 | error_flag[0] = ili; | |
238 | break; | |
239 | case 0xA1: /* IDENTIFY PACKET DEVICE */ | |
240 | case 0xEF: /* SET FEATURES */ | |
241 | case 0x00: /* NOP */ | |
242 | case 0xC6: /* SET MULTIPLE MODE */ | |
243 | error_flag[2] = abrt; | |
244 | break; | |
245 | case 0x2F: // READ LOG EXT | |
246 | error_flag[6] = unc; | |
247 | error_flag[4] = idnf; | |
248 | error_flag[2] = abrt; | |
249 | error_flag[0] = obs; | |
250 | break; | |
251 | case 0x3F: // WRITE LOG EXT | |
252 | error_flag[4] = idnf; | |
253 | error_flag[2] = abrt; | |
254 | error_flag[0] = obs; | |
255 | break; | |
256 | case 0xB0: /* SMART */ | |
257 | switch(FR) { | |
258 | case 0xD0: // SMART READ DATA | |
259 | case 0xD1: // SMART READ ATTRIBUTE THRESHOLDS | |
260 | case 0xD5: /* SMART READ LOG */ | |
261 | error_flag[6] = unc; | |
262 | error_flag[4] = idnf; | |
263 | error_flag[2] = abrt; | |
264 | error_flag[0] = obs; | |
265 | break; | |
266 | case 0xD6: /* SMART WRITE LOG */ | |
267 | error_flag[4] = idnf; | |
268 | error_flag[2] = abrt; | |
269 | error_flag[0] = obs; | |
270 | break; | |
271 | case 0xD2: // Enable/Disable Attribute Autosave | |
272 | case 0xD3: // SMART SAVE ATTRIBUTE VALUES (ATA-3) | |
273 | case 0xD8: // SMART ENABLE OPERATIONS | |
274 | case 0xD9: /* SMART DISABLE OPERATIONS */ | |
275 | case 0xDA: /* SMART RETURN STATUS */ | |
276 | case 0xDB: // Enable/Disable Auto Offline (SFF) | |
277 | error_flag[2] = abrt; | |
278 | break; | |
279 | case 0xD4: // SMART EXECUTE IMMEDIATE OFFLINE | |
280 | error_flag[4] = idnf; | |
281 | error_flag[2] = abrt; | |
282 | break; | |
283 | default: | |
284 | return NULL; | |
285 | break; | |
286 | } | |
287 | break; | |
288 | case 0xB1: /* DEVICE CONFIGURATION */ | |
289 | switch (FR) { | |
290 | case 0xC0: /* DEVICE CONFIGURATION RESTORE */ | |
291 | error_flag[2] = abrt; | |
292 | break; | |
293 | default: | |
294 | return NULL; | |
295 | break; | |
296 | } | |
297 | break; | |
298 | case 0xCA: // WRITE DMA (with retries) | |
299 | case 0xCB: // WRITE DMA (without retries, obsolete since ATA-5) | |
300 | case 0x35: // WRITE DMA EXT | |
301 | case 0x3D: // WRITE DMA FUA EXT | |
302 | case 0xCC: // WRITE DMA QUEUED | |
303 | case 0x36: // WRITE DMA QUEUED EXT | |
304 | case 0x3E: // WRITE DMA QUEUED FUA EXT | |
305 | case 0x61: // WRITE FPDMA QUEUED (NCQ) | |
306 | error_flag[7] = icrc; | |
307 | error_flag[6] = wp; | |
308 | error_flag[5] = mc; | |
309 | error_flag[4] = idnf; | |
310 | error_flag[3] = mcr; | |
311 | error_flag[2] = abrt; | |
312 | error_flag[1] = nm; | |
313 | error_flag[0] = amnf; | |
314 | print_lba=1; | |
315 | if (CR==0x35) | |
316 | print_sector=SC; | |
317 | break; | |
318 | case 0xE4: // READ BUFFER | |
319 | case 0xE8: // WRITE BUFFER | |
320 | error_flag[2] = abrt; | |
321 | break; | |
322 | default: | |
323 | return NULL; | |
324 | } | |
325 | ||
326 | s[0] = '\0'; | |
327 | ||
328 | /* We ignore any status flags other than Device Fault and Error */ | |
329 | ||
330 | if (uses_device_fault && (ST & (1 << 5))) { | |
331 | strcat(s, "Device Fault"); | |
332 | if (ST & 1) // Error flag | |
333 | strcat(s, "; "); | |
334 | } | |
335 | if (ST & 1) { // Error flag | |
336 | int count = 0; | |
337 | ||
338 | strcat(s, "Error: "); | |
339 | for (i = 7; i >= 0; i--) | |
340 | if ((ER & (1 << i)) && (error_flag[i])) { | |
341 | if (count++ > 0) | |
342 | strcat(s, ", "); | |
343 | strcat(s, error_flag[i]); | |
344 | } | |
345 | } | |
346 | ||
347 | // If the error was a READ or WRITE error, print the Logical Block | |
348 | // Address (LBA) at which the read or write failed. | |
349 | if (print_lba) { | |
350 | char tmp[128]; | |
351 | // print number of sectors, if known, and append to print string | |
352 | if (print_sector) { | |
353 | snprintf(tmp, 128, " %d sectors", print_sector); | |
354 | strcat(s, tmp); | |
355 | } | |
356 | ||
357 | if (lba28_regs) { | |
358 | unsigned lba; | |
359 | // bits 24-27: bits 0-3 of DH | |
360 | lba = 0xf & lba28_regs->drive_head; | |
361 | lba <<= 8; | |
362 | // bits 16-23: CH | |
363 | lba |= lba28_regs->cylinder_high; | |
364 | lba <<= 8; | |
365 | // bits 8-15: CL | |
366 | lba |= lba28_regs->cylinder_low; | |
367 | lba <<= 8; | |
368 | // bits 0-7: SN | |
369 | lba |= lba28_regs->sector_number; | |
370 | snprintf(tmp, 128, " at LBA = 0x%08x = %u", lba, lba); | |
371 | strcat(s, tmp); | |
372 | } | |
373 | else if (lba48_regs) { | |
374 | // This assumes that upper LBA registers are 0 for 28-bit commands | |
375 | // (TODO: detect 48-bit commands above) | |
376 | uint64_t lba48; | |
377 | lba48 = lba48_regs->lba_high_register_hi; | |
378 | lba48 <<= 8; | |
379 | lba48 |= lba48_regs->lba_mid_register_hi; | |
380 | lba48 <<= 8; | |
381 | lba48 |= lba48_regs->lba_low_register_hi; | |
382 | lba48 |= lba48_regs->device_register & 0xf; | |
383 | lba48 <<= 8; | |
384 | lba48 |= lba48_regs->lba_high_register; | |
385 | lba48 <<= 8; | |
386 | lba48 |= lba48_regs->lba_mid_register; | |
387 | lba48 <<= 8; | |
388 | lba48 |= lba48_regs->lba_low_register; | |
389 | snprintf(tmp, 128, " at LBA = 0x%08"PRIx64" = %"PRIu64, lba48, lba48); | |
390 | strcat(s, tmp); | |
391 | } | |
392 | } | |
393 | ||
394 | return s; | |
395 | } | |
396 | ||
397 | static inline const char * construct_st_er_desc(char * s, | |
398 | const ata_smart_errorlog_struct * data) | |
399 | { | |
400 | return construct_st_er_desc(s, | |
401 | data->commands[4].commandreg, | |
402 | data->commands[4].featuresreg, | |
403 | data->error_struct.status, | |
404 | data->error_struct.error_register, | |
405 | data->error_struct.sector_count, | |
406 | &data->error_struct, (const ata_smart_exterrlog_error *)0); | |
407 | } | |
408 | ||
409 | static inline const char * construct_st_er_desc(char * s, | |
410 | const ata_smart_exterrlog_error_log * data) | |
411 | { | |
412 | return construct_st_er_desc(s, | |
413 | data->commands[4].command_register, | |
414 | data->commands[4].features_register, | |
415 | data->error.status_register, | |
416 | data->error.error_register, | |
417 | data->error.count_register_hi << 8 | data->error.count_register, | |
418 | (const ata_smart_errorlog_error_struct *)0, &data->error); | |
419 | } | |
420 | ||
421 | static void print_drive_info(const ata_identify_device * drive, | |
422 | const ata_size_info & sizes, | |
423 | const drive_settings * dbentry) | |
424 | { | |
425 | // format drive information (with byte swapping as needed) | |
426 | char model[40+1], serial[20+1], firmware[8+1]; | |
427 | ata_format_id_string(model, drive->model, sizeof(model)-1); | |
428 | ata_format_id_string(serial, drive->serial_no, sizeof(serial)-1); | |
429 | ata_format_id_string(firmware, drive->fw_rev, sizeof(firmware)-1); | |
430 | ||
431 | // Print model family if known | |
432 | if (dbentry && *dbentry->modelfamily) | |
433 | pout("Model Family: %s\n", dbentry->modelfamily); | |
434 | ||
435 | pout("Device Model: %s\n", infofound(model)); | |
436 | if (!dont_print_serial_number) { | |
437 | pout("Serial Number: %s\n", infofound(serial)); | |
438 | ||
439 | unsigned oui = 0; uint64_t unique_id = 0; | |
440 | int naa = ata_get_wwn(drive, oui, unique_id); | |
441 | if (naa >= 0) | |
442 | pout("LU WWN Device Id: %x %06x %09"PRIx64"\n", naa, oui, unique_id); | |
443 | } | |
444 | pout("Firmware Version: %s\n", infofound(firmware)); | |
445 | ||
446 | if (sizes.capacity) { | |
447 | // Print capacity | |
448 | char num[64], cap[32]; | |
449 | pout("User Capacity: %s bytes [%s]\n", | |
450 | format_with_thousands_sep(num, sizeof(num), sizes.capacity), | |
451 | format_capacity(cap, sizeof(cap), sizes.capacity)); | |
452 | ||
453 | // Print sector sizes. | |
454 | if (sizes.phy_sector_size == sizes.log_sector_size) | |
455 | pout("Sector Size: %u bytes logical/physical\n", sizes.log_sector_size); | |
456 | else { | |
457 | pout("Sector Sizes: %u bytes logical, %u bytes physical", | |
458 | sizes.log_sector_size, sizes.phy_sector_size); | |
459 | if (sizes.log_sector_offset) | |
460 | pout(" (offset %u bytes)", sizes.log_sector_offset); | |
461 | pout("\n"); | |
462 | } | |
463 | } | |
464 | ||
465 | // See if drive is recognized | |
466 | pout("Device is: %s\n", !dbentry ? | |
467 | "Not in smartctl database [for details use: -P showall]": | |
468 | "In smartctl database [for details use: -P show]"); | |
469 | ||
470 | // now get ATA version info | |
471 | const char *description; unsigned short minorrev; | |
472 | int version = ataVersionInfo(&description, drive, &minorrev); | |
473 | ||
474 | // SMART Support was first added into the ATA/ATAPI-3 Standard with | |
475 | // Revision 3 of the document, July 25, 1995. Look at the "Document | |
476 | // Status" revision commands at the beginning of | |
477 | // http://www.t13.org/Documents/UploadedDocuments/project/d2008r7b-ATA-3.pdf | |
478 | // to see this. So it's not enough to check if we are ATA-3. | |
479 | // Version=-3 indicates ATA-3 BEFORE Revision 3. | |
480 | // Version=0 indicates that no info is found. This may happen if | |
481 | // the OS provides only part of the IDENTIFY data. | |
482 | ||
483 | std::string majorstr, minorstr; | |
484 | if (version) { | |
485 | if (version <= 8) { | |
486 | majorstr = strprintf("%d", abs(version)); | |
487 | if (description) | |
488 | minorstr = description; | |
489 | else if (!minorrev) | |
490 | minorstr = "Exact ATA specification draft version not indicated"; | |
491 | else | |
492 | minorstr = strprintf("Not recognized. Minor revision code: 0x%04x", minorrev); | |
493 | } | |
494 | else { | |
495 | // Bit 9 in word 80 of ATA IDENTIFY data does not mean "ATA-9" but "ACS-2" | |
496 | // TODO: handle this in ataVersionInfo() | |
497 | majorstr = "8"; | |
498 | if (description) | |
499 | minorstr = description; | |
500 | else if (!minorrev) | |
501 | minorstr = strprintf("ACS-%d (revision not indicated)", version-9+2); | |
502 | else | |
503 | minorstr = strprintf("ACS-%d (unknown minor revision code: 0x%04x)", version-9+2, minorrev); | |
504 | } | |
505 | } | |
506 | ||
507 | pout("ATA Version is: %s\n", infofound(majorstr.c_str())); | |
508 | pout("ATA Standard is: %s\n", infofound(minorstr.c_str())); | |
509 | ||
510 | // print current time and date and timezone | |
511 | char timedatetz[DATEANDEPOCHLEN]; dateandtimezone(timedatetz); | |
512 | pout("Local Time is: %s\n", timedatetz); | |
513 | ||
514 | // Print warning message, if there is one | |
515 | if (dbentry && *dbentry->warningmsg) | |
516 | pout("\n==> WARNING: %s\n\n", dbentry->warningmsg); | |
517 | ||
518 | if (!version || version >= 3) | |
519 | return; | |
520 | ||
521 | pout("SMART is only available in ATA Version 3 Revision 3 or greater.\n"); | |
522 | pout("We will try to proceed in spite of this.\n"); | |
523 | } | |
524 | ||
525 | static const char *OfflineDataCollectionStatus(unsigned char status_byte) | |
526 | { | |
527 | unsigned char stat=status_byte & 0x7f; | |
528 | ||
529 | switch(stat){ | |
530 | case 0x00: | |
531 | return "was never started"; | |
532 | case 0x02: | |
533 | return "was completed without error"; | |
534 | case 0x03: | |
535 | if (status_byte == 0x03) | |
536 | return "is in progress"; | |
537 | else | |
538 | return "is in a Reserved state"; | |
539 | case 0x04: | |
540 | return "was suspended by an interrupting command from host"; | |
541 | case 0x05: | |
542 | return "was aborted by an interrupting command from host"; | |
543 | case 0x06: | |
544 | return "was aborted by the device with a fatal error"; | |
545 | default: | |
546 | if (stat >= 0x40) | |
547 | return "is in a Vendor Specific state"; | |
548 | else | |
549 | return "is in a Reserved state"; | |
550 | } | |
551 | } | |
552 | ||
553 | ||
554 | // prints verbose value Off-line data collection status byte | |
555 | static void PrintSmartOfflineStatus(const ata_smart_values * data) | |
556 | { | |
557 | pout("Offline data collection status: (0x%02x)\t", | |
558 | (int)data->offline_data_collection_status); | |
559 | ||
560 | // Off-line data collection status byte is not a reserved | |
561 | // or vendor specific value | |
562 | pout("Offline data collection activity\n" | |
563 | "\t\t\t\t\t%s.\n", OfflineDataCollectionStatus(data->offline_data_collection_status)); | |
564 | ||
565 | // Report on Automatic Data Collection Status. Only IBM documents | |
566 | // this bit. See SFF 8035i Revision 2 for details. | |
567 | if (data->offline_data_collection_status & 0x80) | |
568 | pout("\t\t\t\t\tAuto Offline Data Collection: Enabled.\n"); | |
569 | else | |
570 | pout("\t\t\t\t\tAuto Offline Data Collection: Disabled.\n"); | |
571 | ||
572 | return; | |
573 | } | |
574 | ||
575 | static void PrintSmartSelfExecStatus(const ata_smart_values * data, | |
576 | unsigned char fix_firmwarebug) | |
577 | { | |
578 | pout("Self-test execution status: "); | |
579 | ||
580 | switch (data->self_test_exec_status >> 4) | |
581 | { | |
582 | case 0: | |
583 | pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t", | |
584 | (int)data->self_test_exec_status); | |
585 | pout("without error or no self-test has ever \n\t\t\t\t\tbeen run.\n"); | |
586 | break; | |
587 | case 1: | |
588 | pout("(%4d)\tThe self-test routine was aborted by\n\t\t\t\t\t", | |
589 | (int)data->self_test_exec_status); | |
590 | pout("the host.\n"); | |
591 | break; | |
592 | case 2: | |
593 | pout("(%4d)\tThe self-test routine was interrupted\n\t\t\t\t\t", | |
594 | (int)data->self_test_exec_status); | |
595 | pout("by the host with a hard or soft reset.\n"); | |
596 | break; | |
597 | case 3: | |
598 | pout("(%4d)\tA fatal error or unknown test error\n\t\t\t\t\t", | |
599 | (int)data->self_test_exec_status); | |
600 | pout("occurred while the device was executing\n\t\t\t\t\t"); | |
601 | pout("its self-test routine and the device \n\t\t\t\t\t"); | |
602 | pout("was unable to complete the self-test \n\t\t\t\t\t"); | |
603 | pout("routine.\n"); | |
604 | break; | |
605 | case 4: | |
606 | pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t", | |
607 | (int)data->self_test_exec_status); | |
608 | pout("a test element that failed and the test\n\t\t\t\t\t"); | |
609 | pout("element that failed is not known.\n"); | |
610 | break; | |
611 | case 5: | |
612 | pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t", | |
613 | (int)data->self_test_exec_status); | |
614 | pout("the electrical element of the test\n\t\t\t\t\t"); | |
615 | pout("failed.\n"); | |
616 | break; | |
617 | case 6: | |
618 | pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t", | |
619 | (int)data->self_test_exec_status); | |
620 | pout("the servo (and/or seek) element of the \n\t\t\t\t\t"); | |
621 | pout("test failed.\n"); | |
622 | break; | |
623 | case 7: | |
624 | pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t", | |
625 | (int)data->self_test_exec_status); | |
626 | pout("the read element of the test failed.\n"); | |
627 | break; | |
628 | case 8: | |
629 | pout("(%4d)\tThe previous self-test completed having\n\t\t\t\t\t", | |
630 | (int)data->self_test_exec_status); | |
631 | pout("a test element that failed and the\n\t\t\t\t\t"); | |
632 | pout("device is suspected of having handling\n\t\t\t\t\t"); | |
633 | pout("damage.\n"); | |
634 | break; | |
635 | case 15: | |
636 | if (fix_firmwarebug == FIX_SAMSUNG3 && data->self_test_exec_status == 0xf0) { | |
637 | pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t", | |
638 | (int)data->self_test_exec_status); | |
639 | pout("with unknown result or self-test in\n\t\t\t\t\t"); | |
640 | pout("progress with less than 10%% remaining.\n"); | |
641 | } | |
642 | else { | |
643 | pout("(%4d)\tSelf-test routine in progress...\n\t\t\t\t\t", | |
644 | (int)data->self_test_exec_status); | |
645 | pout("%1d0%% of test remaining.\n", | |
646 | (int)(data->self_test_exec_status & 0x0f)); | |
647 | } | |
648 | break; | |
649 | default: | |
650 | pout("(%4d)\tReserved.\n", | |
651 | (int)data->self_test_exec_status); | |
652 | break; | |
653 | } | |
654 | ||
655 | } | |
656 | ||
657 | static void PrintSmartTotalTimeCompleteOffline (const ata_smart_values * data) | |
658 | { | |
659 | pout("Total time to complete Offline \n"); | |
660 | pout("data collection: \t\t(%5d) seconds.\n", | |
661 | (int)data->total_time_to_complete_off_line); | |
662 | } | |
663 | ||
664 | static void PrintSmartOfflineCollectCap(const ata_smart_values *data) | |
665 | { | |
666 | pout("Offline data collection\n"); | |
667 | pout("capabilities: \t\t\t (0x%02x) ", | |
668 | (int)data->offline_data_collection_capability); | |
669 | ||
670 | if (data->offline_data_collection_capability == 0x00){ | |
671 | pout("\tOffline data collection not supported.\n"); | |
672 | } | |
673 | else { | |
674 | pout( "%s\n", isSupportExecuteOfflineImmediate(data)? | |
675 | "SMART execute Offline immediate." : | |
676 | "No SMART execute Offline immediate."); | |
677 | ||
678 | pout( "\t\t\t\t\t%s\n", isSupportAutomaticTimer(data)? | |
679 | "Auto Offline data collection on/off support.": | |
680 | "No Auto Offline data collection support."); | |
681 | ||
682 | pout( "\t\t\t\t\t%s\n", isSupportOfflineAbort(data)? | |
683 | "Abort Offline collection upon new\n\t\t\t\t\tcommand.": | |
684 | "Suspend Offline collection upon new\n\t\t\t\t\tcommand."); | |
685 | ||
686 | pout( "\t\t\t\t\t%s\n", isSupportOfflineSurfaceScan(data)? | |
687 | "Offline surface scan supported.": | |
688 | "No Offline surface scan supported."); | |
689 | ||
690 | pout( "\t\t\t\t\t%s\n", isSupportSelfTest(data)? | |
691 | "Self-test supported.": | |
692 | "No Self-test supported."); | |
693 | ||
694 | pout( "\t\t\t\t\t%s\n", isSupportConveyanceSelfTest(data)? | |
695 | "Conveyance Self-test supported.": | |
696 | "No Conveyance Self-test supported."); | |
697 | ||
698 | pout( "\t\t\t\t\t%s\n", isSupportSelectiveSelfTest(data)? | |
699 | "Selective Self-test supported.": | |
700 | "No Selective Self-test supported."); | |
701 | } | |
702 | } | |
703 | ||
704 | static void PrintSmartCapability(const ata_smart_values *data) | |
705 | { | |
706 | pout("SMART capabilities: "); | |
707 | pout("(0x%04x)\t", (int)data->smart_capability); | |
708 | ||
709 | if (data->smart_capability == 0x00) | |
710 | { | |
711 | pout("Automatic saving of SMART data\t\t\t\t\tis not implemented.\n"); | |
712 | } | |
713 | else | |
714 | { | |
715 | ||
716 | pout( "%s\n", (data->smart_capability & 0x01)? | |
717 | "Saves SMART data before entering\n\t\t\t\t\tpower-saving mode.": | |
718 | "Does not save SMART data before\n\t\t\t\t\tentering power-saving mode."); | |
719 | ||
720 | if ( data->smart_capability & 0x02 ) | |
721 | { | |
722 | pout("\t\t\t\t\tSupports SMART auto save timer.\n"); | |
723 | } | |
724 | } | |
725 | } | |
726 | ||
727 | static void PrintSmartErrorLogCapability(const ata_smart_values * data, const ata_identify_device * identity) | |
728 | { | |
729 | pout("Error logging capability: "); | |
730 | ||
731 | if ( isSmartErrorLogCapable(data, identity) ) | |
732 | { | |
733 | pout(" (0x%02x)\tError logging supported.\n", | |
734 | (int)data->errorlog_capability); | |
735 | } | |
736 | else { | |
737 | pout(" (0x%02x)\tError logging NOT supported.\n", | |
738 | (int)data->errorlog_capability); | |
739 | } | |
740 | } | |
741 | ||
742 | static void PrintSmartShortSelfTestPollingTime(const ata_smart_values * data) | |
743 | { | |
744 | pout("Short self-test routine \n"); | |
745 | if (isSupportSelfTest(data)) | |
746 | pout("recommended polling time: \t (%4d) minutes.\n", | |
747 | (int)data->short_test_completion_time); | |
748 | else | |
749 | pout("recommended polling time: \t Not Supported.\n"); | |
750 | } | |
751 | ||
752 | static void PrintSmartExtendedSelfTestPollingTime(const ata_smart_values * data) | |
753 | { | |
754 | pout("Extended self-test routine\n"); | |
755 | if (isSupportSelfTest(data)) | |
756 | pout("recommended polling time: \t (%4d) minutes.\n", | |
757 | TestTime(data, EXTEND_SELF_TEST)); | |
758 | else | |
759 | pout("recommended polling time: \t Not Supported.\n"); | |
760 | } | |
761 | ||
762 | static void PrintSmartConveyanceSelfTestPollingTime(const ata_smart_values * data) | |
763 | { | |
764 | pout("Conveyance self-test routine\n"); | |
765 | if (isSupportConveyanceSelfTest(data)) | |
766 | pout("recommended polling time: \t (%4d) minutes.\n", | |
767 | (int)data->conveyance_test_completion_time); | |
768 | else | |
769 | pout("recommended polling time: \t Not Supported.\n"); | |
770 | } | |
771 | ||
772 | // Check SMART attribute table for Threshold failure | |
773 | // onlyfailed=0: are or were any age or prefailure attributes <= threshold | |
774 | // onlyfailed=1: are any prefailure attributes <= threshold now | |
775 | static int find_failed_attr(const ata_smart_values * data, | |
776 | const ata_smart_thresholds_pvt * thresholds, | |
777 | const ata_vendor_attr_defs & defs, int onlyfailed) | |
778 | { | |
779 | for (int i = 0; i < NUMBER_ATA_SMART_ATTRIBUTES; i++) { | |
780 | const ata_smart_attribute & attr = data->vendor_attributes[i]; | |
781 | ||
782 | ata_attr_state state = ata_get_attr_state(attr, i, thresholds->thres_entries, defs); | |
783 | ||
784 | if (!onlyfailed) { | |
785 | if (state >= ATTRSTATE_FAILED_PAST) | |
786 | return attr.id; | |
787 | } | |
788 | else { | |
789 | if (state == ATTRSTATE_FAILED_NOW && ATTRIBUTE_FLAGS_PREFAILURE(attr.flags)) | |
790 | return attr.id; | |
791 | } | |
792 | } | |
793 | return 0; | |
794 | } | |
795 | ||
796 | // onlyfailed=0 : print all attribute values | |
797 | // onlyfailed=1: just ones that are currently failed and have prefailure bit set | |
798 | // onlyfailed=2: ones that are failed, or have failed with or without prefailure bit set | |
799 | static void PrintSmartAttribWithThres(const ata_smart_values * data, | |
800 | const ata_smart_thresholds_pvt * thresholds, | |
801 | const ata_vendor_attr_defs & defs, | |
802 | int onlyfailed, unsigned char format) | |
803 | { | |
804 | bool brief = !!(format & ata_print_options::FMT_BRIEF); | |
805 | bool hexid = !!(format & ata_print_options::FMT_HEX_ID); | |
806 | bool hexval = !!(format & ata_print_options::FMT_HEX_VAL); | |
807 | bool needheader = true; | |
808 | ||
809 | // step through all vendor attributes | |
810 | for (int i = 0; i < NUMBER_ATA_SMART_ATTRIBUTES; i++) { | |
811 | const ata_smart_attribute & attr = data->vendor_attributes[i]; | |
812 | ||
813 | // Check attribute and threshold | |
814 | unsigned char threshold = 0; | |
815 | ata_attr_state state = ata_get_attr_state(attr, i, thresholds->thres_entries, defs, &threshold); | |
816 | if (state == ATTRSTATE_NON_EXISTING) | |
817 | continue; | |
818 | ||
819 | // These break out of the loop if we are only printing certain entries... | |
820 | if (onlyfailed == 1 && !(ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) && state == ATTRSTATE_FAILED_NOW)) | |
821 | continue; | |
822 | ||
823 | if (onlyfailed == 2 && state < ATTRSTATE_FAILED_PAST) | |
824 | continue; | |
825 | ||
826 | // print header only if needed | |
827 | if (needheader) { | |
828 | if (!onlyfailed) { | |
829 | pout("SMART Attributes Data Structure revision number: %d\n",(int)data->revnumber); | |
830 | pout("Vendor Specific SMART Attributes with Thresholds:\n"); | |
831 | } | |
832 | if (!brief) | |
833 | pout("ID#%s ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE\n", | |
834 | (!hexid ? "" : " ")); | |
835 | else | |
836 | pout("ID#%s ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n", | |
837 | (!hexid ? "" : " ")); | |
838 | needheader = false; | |
839 | } | |
840 | ||
841 | // Format value, worst, threshold | |
842 | std::string valstr, worstr, threstr; | |
843 | if (state > ATTRSTATE_NO_NORMVAL) | |
844 | valstr = (!hexval ? strprintf("%.3d", attr.current) | |
845 | : strprintf("0x%02x", attr.current)); | |
846 | else | |
847 | valstr = (!hexval ? "---" : "----"); | |
848 | if (!(defs[attr.id].flags & ATTRFLAG_NO_WORSTVAL)) | |
849 | worstr = (!hexval ? strprintf("%.3d", attr.worst) | |
850 | : strprintf("0x%02x", attr.worst)); | |
851 | else | |
852 | worstr = (!hexval ? "---" : "----"); | |
853 | if (state > ATTRSTATE_NO_THRESHOLD) | |
854 | threstr = (!hexval ? strprintf("%.3d", threshold) | |
855 | : strprintf("0x%02x", threshold)); | |
856 | else | |
857 | threstr = (!hexval ? "---" : "----"); | |
858 | ||
859 | // Print line for each valid attribute | |
860 | std::string idstr = (!hexid ? strprintf("%3d", attr.id) | |
861 | : strprintf("0x%02x", attr.id)); | |
862 | std::string attrname = ata_get_smart_attr_name(attr.id, defs); | |
863 | std::string rawstr = ata_format_attr_raw_value(attr, defs); | |
864 | ||
865 | if (!brief) | |
866 | pout("%s %-24s0x%04x %-4s %-4s %-4s %-10s%-9s%-12s%s\n", | |
867 | idstr.c_str(), attrname.c_str(), attr.flags, | |
868 | valstr.c_str(), worstr.c_str(), threstr.c_str(), | |
869 | (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? "Pre-fail" : "Old_age"), | |
870 | (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? "Always" : "Offline"), | |
871 | (state == ATTRSTATE_FAILED_NOW ? "FAILING_NOW" : | |
872 | state == ATTRSTATE_FAILED_PAST ? "In_the_past" | |
873 | : " -" ) , | |
874 | rawstr.c_str()); | |
875 | else | |
876 | pout("%s %-24s%c%c%c%c%c%c%c %-4s %-4s %-4s %-5s%s\n", | |
877 | idstr.c_str(), attrname.c_str(), | |
878 | (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? 'P' : '-'), | |
879 | (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? 'O' : '-'), | |
880 | (ATTRIBUTE_FLAGS_PERFORMANCE(attr.flags) ? 'S' : '-'), | |
881 | (ATTRIBUTE_FLAGS_ERRORRATE(attr.flags) ? 'R' : '-'), | |
882 | (ATTRIBUTE_FLAGS_EVENTCOUNT(attr.flags) ? 'C' : '-'), | |
883 | (ATTRIBUTE_FLAGS_SELFPRESERVING(attr.flags) ? 'K' : '-'), | |
884 | (ATTRIBUTE_FLAGS_OTHER(attr.flags) ? '+' : ' '), | |
885 | valstr.c_str(), worstr.c_str(), threstr.c_str(), | |
886 | (state == ATTRSTATE_FAILED_NOW ? "NOW" : | |
887 | state == ATTRSTATE_FAILED_PAST ? "Past" | |
888 | : "-" ), | |
889 | rawstr.c_str()); | |
890 | ||
891 | } | |
892 | ||
893 | if (!needheader) { | |
894 | if (!onlyfailed && brief) { | |
895 | int n = (!hexid ? 28 : 29); | |
896 | pout("%*s||||||_ K auto-keep\n" | |
897 | "%*s|||||__ C event count\n" | |
898 | "%*s||||___ R error rate\n" | |
899 | "%*s|||____ S speed/performance\n" | |
900 | "%*s||_____ O updated online\n" | |
901 | "%*s|______ P prefailure warning\n", | |
902 | n, "", n, "", n, "", n, "", n, "", n, ""); | |
903 | } | |
904 | pout("\n"); | |
905 | } | |
906 | } | |
907 | ||
908 | // Print SMART related SCT capabilities | |
909 | static void ataPrintSCTCapability(const ata_identify_device *drive) | |
910 | { | |
911 | unsigned short sctcaps = drive->words088_255[206-88]; | |
912 | if (!(sctcaps & 0x01)) | |
913 | return; | |
914 | pout("SCT capabilities: \t (0x%04x)\tSCT Status supported.\n", sctcaps); | |
915 | if (sctcaps & 0x08) | |
916 | pout("\t\t\t\t\tSCT Error Recovery Control supported.\n"); | |
917 | if (sctcaps & 0x10) | |
918 | pout("\t\t\t\t\tSCT Feature Control supported.\n"); | |
919 | if (sctcaps & 0x20) | |
920 | pout("\t\t\t\t\tSCT Data Table supported.\n"); | |
921 | } | |
922 | ||
923 | ||
924 | static void PrintGeneralSmartValues(const ata_smart_values *data, const ata_identify_device *drive, | |
925 | unsigned char fix_firmwarebug) | |
926 | { | |
927 | pout("General SMART Values:\n"); | |
928 | ||
929 | PrintSmartOfflineStatus(data); | |
930 | ||
931 | if (isSupportSelfTest(data)){ | |
932 | PrintSmartSelfExecStatus(data, fix_firmwarebug); | |
933 | } | |
934 | ||
935 | PrintSmartTotalTimeCompleteOffline(data); | |
936 | PrintSmartOfflineCollectCap(data); | |
937 | PrintSmartCapability(data); | |
938 | ||
939 | PrintSmartErrorLogCapability(data, drive); | |
940 | ||
941 | pout( "\t\t\t\t\t%s\n", isGeneralPurposeLoggingCapable(drive)? | |
942 | "General Purpose Logging supported.": | |
943 | "No General Purpose Logging support."); | |
944 | ||
945 | if (isSupportSelfTest(data)){ | |
946 | PrintSmartShortSelfTestPollingTime (data); | |
947 | PrintSmartExtendedSelfTestPollingTime (data); | |
948 | } | |
949 | if (isSupportConveyanceSelfTest(data)) | |
950 | PrintSmartConveyanceSelfTestPollingTime (data); | |
951 | ||
952 | ataPrintSCTCapability(drive); | |
953 | ||
954 | pout("\n"); | |
955 | } | |
956 | ||
957 | // Get # sectors of a log addr, 0 if log does not exist. | |
958 | static unsigned GetNumLogSectors(const ata_smart_log_directory * logdir, unsigned logaddr, bool gpl) | |
959 | { | |
960 | if (!logdir) | |
961 | return 0; | |
962 | if (logaddr > 0xff) | |
963 | return 0; | |
964 | if (logaddr == 0) | |
965 | return 1; | |
966 | unsigned n = logdir->entry[logaddr-1].numsectors; | |
967 | if (gpl) | |
968 | // GP logs may have >255 sectors | |
969 | n |= logdir->entry[logaddr-1].reserved << 8; | |
970 | return n; | |
971 | } | |
972 | ||
973 | // Get name of log. | |
974 | // Table A.2 of T13/2161-D Revision 2 (ACS-3), February 21, 2012. | |
975 | static const char * GetLogName(unsigned logaddr) | |
976 | { | |
977 | switch (logaddr) { | |
978 | case 0x00: return "Log Directory"; | |
979 | case 0x01: return "Summary SMART error log"; | |
980 | case 0x02: return "Comprehensive SMART error log"; | |
981 | case 0x03: return "Ext. Comprehensive SMART error log"; | |
982 | case 0x04: return "Device Statistics log"; | |
983 | case 0x05: return "Reserved for the CFA"; // ACS-2 | |
984 | case 0x06: return "SMART self-test log"; | |
985 | case 0x07: return "Extended self-test log"; | |
986 | case 0x08: return "Power Conditions log"; // ACS-2 | |
987 | case 0x09: return "Selective self-test log"; | |
988 | case 0x0d: return "LPS Mis-alignment log"; // ACS-2 | |
989 | case 0x10: return "NCQ Command Error log"; | |
990 | case 0x11: return "SATA Phy Event Counters"; | |
991 | case 0x12: return "SATA NCQ Queue Management log"; // ACS-3 | |
992 | case 0x13: return "SATA NCQ Send and Receive log"; // ACS-3 | |
993 | case 0x14: | |
994 | case 0x15: | |
995 | case 0x16: return "Reserved for Serial ATA"; | |
996 | case 0x19: return "LBA Status log"; // ACS-3 | |
997 | case 0x20: return "Streaming performance log"; // Obsolete | |
998 | case 0x21: return "Write stream error log"; | |
999 | case 0x22: return "Read stream error log"; | |
1000 | case 0x23: return "Delayed sector log"; // Obsolete | |
1001 | case 0x24: return "Current Device Internal Status Data log"; // ACS-3 | |
1002 | case 0x25: return "Saved Device Internal Status Data log"; // ACS-3 | |
1003 | case 0x30: return "IDENTIFY DEVICE data log"; // ACS-3 | |
1004 | case 0xe0: return "SCT Command/Status"; | |
1005 | case 0xe1: return "SCT Data Transfer"; | |
1006 | default: | |
1007 | if (0xa0 <= logaddr && logaddr <= 0xdf) | |
1008 | return "Device vendor specific log"; | |
1009 | if (0x80 <= logaddr && logaddr <= 0x9f) | |
1010 | return "Host vendor specific log"; | |
1011 | return "Reserved"; | |
1012 | } | |
1013 | /*NOTREACHED*/ | |
1014 | } | |
1015 | ||
1016 | // Print SMART and/or GP Log Directory | |
1017 | static void PrintLogDirectories(const ata_smart_log_directory * gplogdir, | |
1018 | const ata_smart_log_directory * smartlogdir) | |
1019 | { | |
1020 | if (gplogdir) | |
1021 | pout("General Purpose Log Directory Version %u\n", gplogdir->logversion); | |
1022 | if (smartlogdir) | |
1023 | pout("SMART %sLog Directory Version %u%s\n", | |
1024 | (gplogdir ? " " : ""), smartlogdir->logversion, | |
1025 | (smartlogdir->logversion==1 ? " [multi-sector log support]" : "")); | |
1026 | ||
1027 | for (unsigned i = 0; i <= 0xff; i++) { | |
1028 | // Get number of sectors | |
1029 | unsigned smart_numsect = GetNumLogSectors(smartlogdir, i, false); | |
1030 | unsigned gp_numsect = GetNumLogSectors(gplogdir , i, true ); | |
1031 | ||
1032 | if (!(smart_numsect || gp_numsect)) | |
1033 | continue; // Log does not exist | |
1034 | ||
1035 | const char * name = GetLogName(i); | |
1036 | ||
1037 | // Print name and length of log. | |
1038 | // If both SMART and GP exist, print separate entries if length differ. | |
1039 | if (smart_numsect == gp_numsect) | |
1040 | pout( "GP/S Log at address 0x%02x has %4d sectors [%s]\n", i, smart_numsect, name); | |
1041 | else { | |
1042 | if (gp_numsect) | |
1043 | pout("GP %sLog at address 0x%02x has %4d sectors [%s]\n", (smartlogdir?" ":""), | |
1044 | i, gp_numsect, name); | |
1045 | if (smart_numsect) | |
1046 | pout("SMART Log at address 0x%02x has %4d sectors [%s]\n", i, smart_numsect, name); | |
1047 | } | |
1048 | } | |
1049 | pout("\n"); | |
1050 | } | |
1051 | ||
1052 | // Print hexdump of log pages. | |
1053 | // Format is compatible with 'xxd -r'. | |
1054 | static void PrintLogPages(const char * type, const unsigned char * data, | |
1055 | unsigned char logaddr, unsigned page, | |
1056 | unsigned num_pages, unsigned max_pages) | |
1057 | { | |
1058 | pout("%s Log 0x%02x [%s], Page %u-%u (of %u)\n", | |
1059 | type, logaddr, GetLogName(logaddr), page, page+num_pages-1, max_pages); | |
1060 | for (unsigned i = 0; i < num_pages * 512; i += 16) { | |
1061 | const unsigned char * p = data+i; | |
1062 | pout("%07x: %02x %02x %02x %02x %02x %02x %02x %02x " | |
1063 | "%02x %02x %02x %02x %02x %02x %02x %02x ", | |
1064 | (page * 512) + i, | |
1065 | p[ 0], p[ 1], p[ 2], p[ 3], p[ 4], p[ 5], p[ 6], p[ 7], | |
1066 | p[ 8], p[ 9], p[10], p[11], p[12], p[13], p[14], p[15]); | |
1067 | #define P(n) (' ' <= p[n] && p[n] <= '~' ? (int)p[n] : '.') | |
1068 | pout("|%c%c%c%c%c%c%c%c" | |
1069 | "%c%c%c%c%c%c%c%c|\n", | |
1070 | P( 0), P( 1), P( 2), P( 3), P( 4), P( 5), P( 6), P( 7), | |
1071 | P( 8), P( 9), P(10), P(11), P(12), P(13), P(14), P(15)); | |
1072 | #undef P | |
1073 | if ((i & 0x1ff) == 0x1f0) | |
1074 | pout("\n"); | |
1075 | } | |
1076 | } | |
1077 | ||
1078 | /////////////////////////////////////////////////////////////////////// | |
1079 | // Device statistics (Log 0x04) | |
1080 | ||
1081 | // See Section A.5 of | |
1082 | // ATA/ATAPI Command Set - 3 (ACS-3) | |
1083 | // T13/2161-D Revision 2, February 21, 2012. | |
1084 | ||
1085 | struct devstat_entry_info | |
1086 | { | |
1087 | short size; // #bytes of value, -1 for signed char | |
1088 | const char * name; | |
1089 | }; | |
1090 | ||
1091 | const devstat_entry_info devstat_info_0x00[] = { | |
1092 | { 2, "List of supported log pages" }, | |
1093 | { 0, 0 } | |
1094 | }; | |
1095 | ||
1096 | const devstat_entry_info devstat_info_0x01[] = { | |
1097 | { 2, "General Statistics" }, | |
1098 | { 4, "Lifetime Power-On Resets" }, | |
1099 | { 4, "Power-on Hours" }, // spec says no flags(?) | |
1100 | { 6, "Logical Sectors Written" }, | |
1101 | { 6, "Number of Write Commands" }, | |
1102 | { 6, "Logical Sectors Read" }, | |
1103 | { 6, "Number of Read Commands" }, | |
1104 | { 6, "Date and Time TimeStamp" }, // ACS-3 | |
1105 | { 0, 0 } | |
1106 | }; | |
1107 | ||
1108 | const devstat_entry_info devstat_info_0x02[] = { | |
1109 | { 2, "Free-Fall Statistics" }, | |
1110 | { 4, "Number of Free-Fall Events Detected" }, | |
1111 | { 4, "Overlimit Shock Events" }, | |
1112 | { 0, 0 } | |
1113 | }; | |
1114 | ||
1115 | const devstat_entry_info devstat_info_0x03[] = { | |
1116 | { 2, "Rotating Media Statistics" }, | |
1117 | { 4, "Spindle Motor Power-on Hours" }, | |
1118 | { 4, "Head Flying Hours" }, | |
1119 | { 4, "Head Load Events" }, | |
1120 | { 4, "Number of Reallocated Logical Sectors" }, | |
1121 | { 4, "Read Recovery Attempts" }, | |
1122 | { 4, "Number of Mechanical Start Failures" }, | |
1123 | { 4, "Number of Realloc. Candidate Logical Sectors" }, // ACS-3 | |
1124 | { 0, 0 } | |
1125 | }; | |
1126 | ||
1127 | const devstat_entry_info devstat_info_0x04[] = { | |
1128 | { 2, "General Errors Statistics" }, | |
1129 | { 4, "Number of Reported Uncorrectable Errors" }, | |
1130 | //{ 4, "Number of Resets Between Command Acceptance and Command Completion" }, | |
1131 | { 4, "Resets Between Cmd Acceptance and Completion" }, | |
1132 | { 0, 0 } | |
1133 | }; | |
1134 | ||
1135 | const devstat_entry_info devstat_info_0x05[] = { | |
1136 | { 2, "Temperature Statistics" }, | |
1137 | { -1, "Current Temperature" }, | |
1138 | { -1, "Average Short Term Temperature" }, | |
1139 | { -1, "Average Long Term Temperature" }, | |
1140 | { -1, "Highest Temperature" }, | |
1141 | { -1, "Lowest Temperature" }, | |
1142 | { -1, "Highest Average Short Term Temperature" }, | |
1143 | { -1, "Lowest Average Short Term Temperature" }, | |
1144 | { -1, "Highest Average Long Term Temperature" }, | |
1145 | { -1, "Lowest Average Long Term Temperature" }, | |
1146 | { 4, "Time in Over-Temperature" }, | |
1147 | { -1, "Specified Maximum Operating Temperature" }, | |
1148 | { 4, "Time in Under-Temperature" }, | |
1149 | { -1, "Specified Minimum Operating Temperature" }, | |
1150 | { 0, 0 } | |
1151 | }; | |
1152 | ||
1153 | const devstat_entry_info devstat_info_0x06[] = { | |
1154 | { 2, "Transport Statistics" }, | |
1155 | { 4, "Number of Hardware Resets" }, | |
1156 | { 4, "Number of ASR Events" }, | |
1157 | { 4, "Number of Interface CRC Errors" }, | |
1158 | { 0, 0 } | |
1159 | }; | |
1160 | ||
1161 | const devstat_entry_info devstat_info_0x07[] = { | |
1162 | { 2, "Solid State Device Statistics" }, | |
1163 | { 1, "Percentage Used Endurance Indicator" }, | |
1164 | { 0, 0 } | |
1165 | }; | |
1166 | ||
1167 | const devstat_entry_info * devstat_infos[] = { | |
1168 | devstat_info_0x00, | |
1169 | devstat_info_0x01, | |
1170 | devstat_info_0x02, | |
1171 | devstat_info_0x03, | |
1172 | devstat_info_0x04, | |
1173 | devstat_info_0x05, | |
1174 | devstat_info_0x06, | |
1175 | devstat_info_0x07 | |
1176 | }; | |
1177 | ||
1178 | const int num_devstat_infos = sizeof(devstat_infos)/sizeof(devstat_infos[0]); | |
1179 | ||
1180 | static void print_device_statistics_page(const unsigned char * data, int page, | |
1181 | bool & need_trailer) | |
1182 | { | |
1183 | const devstat_entry_info * info = (page < num_devstat_infos ? devstat_infos[page] : 0); | |
1184 | const char * name = (info ? info[0].name : "Unknown Statistics"); | |
1185 | ||
1186 | // Check page number in header | |
1187 | static const char line[] = " ===== = = == "; | |
1188 | if (!data[2]) { | |
1189 | pout("%3d%s%s (empty) ==\n", page, line, name); | |
1190 | return; | |
1191 | } | |
1192 | if (data[2] != page) { | |
1193 | pout("%3d%s%s (invalid page %d in header) ==\n", page, line, name, data[2]); | |
1194 | return; | |
1195 | } | |
1196 | ||
1197 | pout("%3d%s%s (rev %d) ==\n", page, line, name, data[0]); | |
1198 | ||
1199 | // Print entries | |
1200 | for (int i = 1, offset = 8; offset < 512-7; i++, offset+=8) { | |
1201 | // Check for last known entry | |
1202 | if (info && !info[i].size) | |
1203 | info = 0; | |
1204 | ||
1205 | // Skip unsupported entries | |
1206 | unsigned char flags = data[offset+7]; | |
1207 | if (!(flags & 0x80)) | |
1208 | continue; | |
1209 | ||
1210 | // Get value size, default to max if unknown | |
1211 | int size = (info ? info[i].size : 7); | |
1212 | ||
1213 | // Format value | |
1214 | char valstr[32]; | |
1215 | if (flags & 0x40) { // valid flag | |
1216 | // Get value | |
1217 | int64_t val; | |
1218 | if (size < 0) { | |
1219 | val = (signed char)data[offset]; | |
1220 | } | |
1221 | else { | |
1222 | val = 0; | |
1223 | for (int j = 0; j < size; j++) | |
1224 | val |= (int64_t)data[offset+j] << (j*8); | |
1225 | } | |
1226 | snprintf(valstr, sizeof(valstr), "%"PRId64, val); | |
1227 | } | |
1228 | else { | |
1229 | // Value not known (yet) | |
1230 | strcpy(valstr, "-"); | |
1231 | } | |
1232 | ||
1233 | pout("%3d 0x%03x %d%c %15s%c %s\n", | |
1234 | page, offset, | |
1235 | abs(size), | |
1236 | (flags & 0x1f ? '+' : ' '), // unknown flags | |
1237 | valstr, | |
1238 | (flags & 0x20 ? '~' : ' '), // normalized flag | |
1239 | (info ? info[i].name : "Unknown")); | |
1240 | if (flags & 0x20) | |
1241 | need_trailer = true; | |
1242 | } | |
1243 | } | |
1244 | ||
1245 | static bool print_device_statistics(ata_device * device, unsigned nsectors, | |
1246 | const std::vector<int> & single_pages, bool all_pages, bool ssd_page) | |
1247 | { | |
1248 | // Read list of supported pages from page 0 | |
1249 | unsigned char page_0[512] = {0, }; | |
1250 | if (!ataReadLogExt(device, 0x04, 0, 0, page_0, 1)) | |
1251 | return false; | |
1252 | ||
1253 | unsigned char nentries = page_0[8]; | |
1254 | if (!(page_0[2] == 0 && nentries > 0)) { | |
1255 | pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n", page_0[2], nentries); | |
1256 | return false; | |
1257 | } | |
1258 | ||
1259 | // Prepare list of pages to print | |
1260 | std::vector<int> pages; | |
1261 | unsigned i; | |
1262 | if (all_pages) { | |
1263 | // Add all supported pages | |
1264 | for (i = 0; i < nentries; i++) { | |
1265 | int page = page_0[8+1+i]; | |
1266 | if (page) | |
1267 | pages.push_back(page); | |
1268 | } | |
1269 | ssd_page = false; | |
1270 | } | |
1271 | // Add manually specified pages | |
1272 | bool print_page_0 = false; | |
1273 | for (i = 0; i < single_pages.size() || ssd_page; i++) { | |
1274 | int page = (i < single_pages.size() ? single_pages[i] : 7); | |
1275 | if (!page) | |
1276 | print_page_0 = true; | |
1277 | else if (page >= (int)nsectors) | |
1278 | pout("Device Statistics Log has only %u pages\n", nsectors); | |
1279 | else | |
1280 | pages.push_back(page); | |
1281 | if (page == 7) | |
1282 | ssd_page = false; | |
1283 | } | |
1284 | ||
1285 | // Print list of supported pages if requested | |
1286 | if (print_page_0) { | |
1287 | pout("Device Statistics (GP Log 0x04) supported pages\n"); | |
1288 | pout("Page Description\n"); | |
1289 | for (i = 0; i < nentries; i++) { | |
1290 | int page = page_0[8+1+i]; | |
1291 | pout("%3d %s\n", page, | |
1292 | (page < num_devstat_infos ? devstat_infos[page][0].name : "Unknown Statistics")); | |
1293 | } | |
1294 | pout("\n"); | |
1295 | } | |
1296 | ||
1297 | // Read & print pages | |
1298 | if (!pages.empty()) { | |
1299 | pout("Device Statistics (GP Log 0x04)\n"); | |
1300 | pout("Page Offset Size Value Description\n"); | |
1301 | bool need_trailer = false; | |
1302 | ||
1303 | for (i = 0; i < pages.size(); i++) { | |
1304 | int page = pages[i]; | |
1305 | unsigned char page_n[512] = {0, }; | |
1306 | if (!ataReadLogExt(device, 0x04, 0, page, page_n, 1)) | |
1307 | return false; | |
1308 | print_device_statistics_page(page_n, page, need_trailer); | |
1309 | } | |
1310 | ||
1311 | if (need_trailer) | |
1312 | pout("%30s|_ ~ normalized value\n", ""); | |
1313 | pout("\n"); | |
1314 | } | |
1315 | ||
1316 | return true; | |
1317 | } | |
1318 | ||
1319 | ||
1320 | /////////////////////////////////////////////////////////////////////// | |
1321 | ||
1322 | // Print log 0x11 | |
1323 | static void PrintSataPhyEventCounters(const unsigned char * data, bool reset) | |
1324 | { | |
1325 | if (checksum(data)) | |
1326 | checksumwarning("SATA Phy Event Counters"); | |
1327 | pout("SATA Phy Event Counters (GP Log 0x11)\n"); | |
1328 | if (data[0] || data[1] || data[2] || data[3]) | |
1329 | pout("[Reserved: 0x%02x 0x%02x 0x%02x 0x%02x]\n", | |
1330 | data[0], data[1], data[2], data[3]); | |
1331 | pout("ID Size Value Description\n"); | |
1332 | ||
1333 | for (unsigned i = 4; ; ) { | |
1334 | // Get counter id and size (bits 14:12) | |
1335 | unsigned id = data[i] | (data[i+1] << 8); | |
1336 | unsigned size = ((id >> 12) & 0x7) << 1; | |
1337 | id &= 0x8fff; | |
1338 | ||
1339 | // End of counter table ? | |
1340 | if (!id) | |
1341 | break; | |
1342 | i += 2; | |
1343 | ||
1344 | if (!(2 <= size && size <= 8 && i + size < 512)) { | |
1345 | pout("0x%04x %u: Invalid entry\n", id, size); | |
1346 | break; | |
1347 | } | |
1348 | ||
1349 | // Get value | |
1350 | uint64_t val = 0, max_val = 0; | |
1351 | for (unsigned j = 0; j < size; j+=2) { | |
1352 | val |= (uint64_t)(data[i+j] | (data[i+j+1] << 8)) << (j*8); | |
1353 | max_val |= (uint64_t)0xffffU << (j*8); | |
1354 | } | |
1355 | i += size; | |
1356 | ||
1357 | // Get name | |
1358 | const char * name; | |
1359 | switch (id) { | |
1360 | case 0x001: name = "Command failed due to ICRC error"; break; // Mandatory | |
1361 | case 0x002: name = "R_ERR response for data FIS"; break; | |
1362 | case 0x003: name = "R_ERR response for device-to-host data FIS"; break; | |
1363 | case 0x004: name = "R_ERR response for host-to-device data FIS"; break; | |
1364 | case 0x005: name = "R_ERR response for non-data FIS"; break; | |
1365 | case 0x006: name = "R_ERR response for device-to-host non-data FIS"; break; | |
1366 | case 0x007: name = "R_ERR response for host-to-device non-data FIS"; break; | |
1367 | case 0x008: name = "Device-to-host non-data FIS retries"; break; | |
1368 | case 0x009: name = "Transition from drive PhyRdy to drive PhyNRdy"; break; | |
1369 | case 0x00A: name = "Device-to-host register FISes sent due to a COMRESET"; break; // Mandatory | |
1370 | case 0x00B: name = "CRC errors within host-to-device FIS"; break; | |
1371 | case 0x00D: name = "Non-CRC errors within host-to-device FIS"; break; | |
1372 | case 0x00F: name = "R_ERR response for host-to-device data FIS, CRC"; break; | |
1373 | case 0x010: name = "R_ERR response for host-to-device data FIS, non-CRC"; break; | |
1374 | case 0x012: name = "R_ERR response for host-to-device non-data FIS, CRC"; break; | |
1375 | case 0x013: name = "R_ERR response for host-to-device non-data FIS, non-CRC"; break; | |
1376 | default: name = (id & 0x8000 ? "Vendor specific" : "Unknown"); break; | |
1377 | } | |
1378 | ||
1379 | // Counters stop at max value, add '+' in this case | |
1380 | pout("0x%04x %u %12"PRIu64"%c %s\n", id, size, val, | |
1381 | (val == max_val ? '+' : ' '), name); | |
1382 | } | |
1383 | if (reset) | |
1384 | pout("All counters reset\n"); | |
1385 | pout("\n"); | |
1386 | } | |
1387 | ||
1388 | // Get description for 'state' value from SMART Error Logs | |
1389 | static const char * get_error_log_state_desc(unsigned state) | |
1390 | { | |
1391 | state &= 0x0f; | |
1392 | switch (state){ | |
1393 | case 0x0: return "in an unknown state"; | |
1394 | case 0x1: return "sleeping"; | |
1395 | case 0x2: return "in standby mode"; | |
1396 | case 0x3: return "active or idle"; | |
1397 | case 0x4: return "doing SMART Offline or Self-test"; | |
1398 | default: | |
1399 | return (state < 0xb ? "in a reserved state" | |
1400 | : "in a vendor specific state"); | |
1401 | } | |
1402 | } | |
1403 | ||
1404 | // returns number of errors | |
1405 | static int PrintSmartErrorlog(const ata_smart_errorlog *data, | |
1406 | unsigned char fix_firmwarebug) | |
1407 | { | |
1408 | pout("SMART Error Log Version: %d\n", (int)data->revnumber); | |
1409 | ||
1410 | // if no errors logged, return | |
1411 | if (!data->error_log_pointer){ | |
1412 | pout("No Errors Logged\n\n"); | |
1413 | return 0; | |
1414 | } | |
1415 | print_on(); | |
1416 | // If log pointer out of range, return | |
1417 | if (data->error_log_pointer>5){ | |
1418 | pout("Invalid Error Log index = 0x%02x (T13/1321D rev 1c " | |
1419 | "Section 8.41.6.8.2.2 gives valid range from 1 to 5)\n\n", | |
1420 | (int)data->error_log_pointer); | |
1421 | return 0; | |
1422 | } | |
1423 | ||
1424 | // Some internal consistency checking of the data structures | |
1425 | if ((data->ata_error_count-data->error_log_pointer)%5 && fix_firmwarebug != FIX_SAMSUNG2) { | |
1426 | pout("Warning: ATA error count %d inconsistent with error log pointer %d\n\n", | |
1427 | data->ata_error_count,data->error_log_pointer); | |
1428 | } | |
1429 | ||
1430 | // starting printing error log info | |
1431 | if (data->ata_error_count<=5) | |
1432 | pout( "ATA Error Count: %d\n", (int)data->ata_error_count); | |
1433 | else | |
1434 | pout( "ATA Error Count: %d (device log contains only the most recent five errors)\n", | |
1435 | (int)data->ata_error_count); | |
1436 | print_off(); | |
1437 | pout("\tCR = Command Register [HEX]\n" | |
1438 | "\tFR = Features Register [HEX]\n" | |
1439 | "\tSC = Sector Count Register [HEX]\n" | |
1440 | "\tSN = Sector Number Register [HEX]\n" | |
1441 | "\tCL = Cylinder Low Register [HEX]\n" | |
1442 | "\tCH = Cylinder High Register [HEX]\n" | |
1443 | "\tDH = Device/Head Register [HEX]\n" | |
1444 | "\tDC = Device Command Register [HEX]\n" | |
1445 | "\tER = Error register [HEX]\n" | |
1446 | "\tST = Status register [HEX]\n" | |
1447 | "Powered_Up_Time is measured from power on, and printed as\n" | |
1448 | "DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n" | |
1449 | "SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n"); | |
1450 | ||
1451 | // now step through the five error log data structures (table 39 of spec) | |
1452 | for (int k = 4; k >= 0; k-- ) { | |
1453 | ||
1454 | // The error log data structure entries are a circular buffer | |
1455 | int j, i=(data->error_log_pointer+k)%5; | |
1456 | const ata_smart_errorlog_struct * elog = data->errorlog_struct+i; | |
1457 | const ata_smart_errorlog_error_struct * summary = &(elog->error_struct); | |
1458 | ||
1459 | // Spec says: unused error log structures shall be zero filled | |
1460 | if (nonempty(elog, sizeof(*elog))){ | |
1461 | // Table 57 of T13/1532D Volume 1 Revision 3 | |
1462 | const char *msgstate = get_error_log_state_desc(summary->state); | |
1463 | int days = (int)summary->timestamp/24; | |
1464 | ||
1465 | // See table 42 of ATA5 spec | |
1466 | print_on(); | |
1467 | pout("Error %d occurred at disk power-on lifetime: %d hours (%d days + %d hours)\n", | |
1468 | (int)(data->ata_error_count+k-4), (int)summary->timestamp, days, (int)(summary->timestamp-24*days)); | |
1469 | print_off(); | |
1470 | pout(" When the command that caused the error occurred, the device was %s.\n\n",msgstate); | |
1471 | pout(" After command completion occurred, registers were:\n" | |
1472 | " ER ST SC SN CL CH DH\n" | |
1473 | " -- -- -- -- -- -- --\n" | |
1474 | " %02x %02x %02x %02x %02x %02x %02x", | |
1475 | (int)summary->error_register, | |
1476 | (int)summary->status, | |
1477 | (int)summary->sector_count, | |
1478 | (int)summary->sector_number, | |
1479 | (int)summary->cylinder_low, | |
1480 | (int)summary->cylinder_high, | |
1481 | (int)summary->drive_head); | |
1482 | // Add a description of the contents of the status and error registers | |
1483 | // if possible | |
1484 | char descbuf[256]; | |
1485 | const char * st_er_desc = construct_st_er_desc(descbuf, elog); | |
1486 | if (st_er_desc) | |
1487 | pout(" %s", st_er_desc); | |
1488 | pout("\n\n"); | |
1489 | pout(" Commands leading to the command that caused the error were:\n" | |
1490 | " CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name\n" | |
1491 | " -- -- -- -- -- -- -- -- ---------------- --------------------\n"); | |
1492 | for ( j = 4; j >= 0; j--){ | |
1493 | const ata_smart_errorlog_command_struct * thiscommand = elog->commands+j; | |
1494 | ||
1495 | // Spec says: unused data command structures shall be zero filled | |
1496 | if (nonempty(thiscommand, sizeof(*thiscommand))) { | |
1497 | char timestring[32]; | |
1498 | ||
1499 | // Convert integer milliseconds to a text-format string | |
1500 | MsecToText(thiscommand->timestamp, timestring); | |
1501 | ||
1502 | pout(" %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n", | |
1503 | (int)thiscommand->commandreg, | |
1504 | (int)thiscommand->featuresreg, | |
1505 | (int)thiscommand->sector_count, | |
1506 | (int)thiscommand->sector_number, | |
1507 | (int)thiscommand->cylinder_low, | |
1508 | (int)thiscommand->cylinder_high, | |
1509 | (int)thiscommand->drive_head, | |
1510 | (int)thiscommand->devicecontrolreg, | |
1511 | timestring, | |
1512 | look_up_ata_command(thiscommand->commandreg, thiscommand->featuresreg)); | |
1513 | } | |
1514 | } | |
1515 | pout("\n"); | |
1516 | } | |
1517 | } | |
1518 | print_on(); | |
1519 | if (printing_is_switchable) | |
1520 | pout("\n"); | |
1521 | print_off(); | |
1522 | return data->ata_error_count; | |
1523 | } | |
1524 | ||
1525 | // Print SMART Extended Comprehensive Error Log (GP Log 0x03) | |
1526 | static int PrintSmartExtErrorLog(const ata_smart_exterrlog * log, | |
1527 | unsigned nsectors, unsigned max_errors) | |
1528 | { | |
1529 | pout("SMART Extended Comprehensive Error Log Version: %u (%u sectors)\n", | |
1530 | log->version, nsectors); | |
1531 | ||
1532 | if (!log->device_error_count) { | |
1533 | pout("No Errors Logged\n\n"); | |
1534 | return 0; | |
1535 | } | |
1536 | print_on(); | |
1537 | ||
1538 | // Check index | |
1539 | unsigned nentries = nsectors * 4; | |
1540 | unsigned erridx = log->error_log_index; | |
1541 | if (!(1 <= erridx && erridx <= nentries)){ | |
1542 | // Some Samsung disks (at least SP1614C/SW100-25, HD300LJ/ZT100-12) use the | |
1543 | // former index from Summary Error Log (byte 1, now reserved) and set byte 2-3 | |
1544 | // to 0. | |
1545 | if (!(erridx == 0 && 1 <= log->reserved1 && log->reserved1 <= nentries)) { | |
1546 | pout("Invalid Error Log index = 0x%04x (reserved = 0x%02x)\n", erridx, log->reserved1); | |
1547 | return 0; | |
1548 | } | |
1549 | pout("Invalid Error Log index = 0x%04x, trying reserved byte (0x%02x) instead\n", erridx, log->reserved1); | |
1550 | erridx = log->reserved1; | |
1551 | } | |
1552 | ||
1553 | // Index base is not clearly specified by ATA8-ACS (T13/1699-D Revision 6a), | |
1554 | // it is 1-based in practice. | |
1555 | erridx--; | |
1556 | ||
1557 | // Calculate #errors to print | |
1558 | unsigned errcnt = log->device_error_count; | |
1559 | ||
1560 | if (errcnt <= nentries) | |
1561 | pout("Device Error Count: %u\n", log->device_error_count); | |
1562 | else { | |
1563 | errcnt = nentries; | |
1564 | pout("Device Error Count: %u (device log contains only the most recent %u errors)\n", | |
1565 | log->device_error_count, errcnt); | |
1566 | } | |
1567 | ||
1568 | if (max_errors < errcnt) | |
1569 | errcnt = max_errors; | |
1570 | ||
1571 | print_off(); | |
1572 | pout("\tCR = Command Register\n" | |
1573 | "\tFEATR = Features Register\n" | |
1574 | "\tCOUNT = Count (was: Sector Count) Register\n" | |
1575 | "\tLBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8\n" | |
1576 | "\tLH = LBA High (was: Cylinder High) Register ] LBA\n" | |
1577 | "\tLM = LBA Mid (was: Cylinder Low) Register ] Register\n" | |
1578 | "\tLL = LBA Low (was: Sector Number) Register ]\n" | |
1579 | "\tDV = Device (was: Device/Head) Register\n" | |
1580 | "\tDC = Device Control Register\n" | |
1581 | "\tER = Error register\n" | |
1582 | "\tST = Status register\n" | |
1583 | "Powered_Up_Time is measured from power on, and printed as\n" | |
1584 | "DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n" | |
1585 | "SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n"); | |
1586 | ||
1587 | // Iterate through circular buffer in reverse direction | |
1588 | for (unsigned i = 0, errnum = log->device_error_count; | |
1589 | i < errcnt; i++, errnum--, erridx = (erridx > 0 ? erridx - 1 : nentries - 1)) { | |
1590 | ||
1591 | const ata_smart_exterrlog_error_log & entry = log[erridx / 4].error_logs[erridx % 4]; | |
1592 | ||
1593 | // Skip unused entries | |
1594 | if (!nonempty(&entry, sizeof(entry))) { | |
1595 | pout("Error %u [%u] log entry is empty\n", errnum, erridx); | |
1596 | continue; | |
1597 | } | |
1598 | ||
1599 | // Print error information | |
1600 | print_on(); | |
1601 | const ata_smart_exterrlog_error & err = entry.error; | |
1602 | pout("Error %u [%u] occurred at disk power-on lifetime: %u hours (%u days + %u hours)\n", | |
1603 | errnum, erridx, err.timestamp, err.timestamp / 24, err.timestamp % 24); | |
1604 | print_off(); | |
1605 | ||
1606 | pout(" When the command that caused the error occurred, the device was %s.\n\n", | |
1607 | get_error_log_state_desc(err.state)); | |
1608 | ||
1609 | // Print registers | |
1610 | pout(" After command completion occurred, registers were:\n" | |
1611 | " ER -- ST COUNT LBA_48 LH LM LL DV DC\n" | |
1612 | " -- -- -- == -- == == == -- -- -- -- --\n" | |
1613 | " %02x -- %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", | |
1614 | err.error_register, | |
1615 | err.status_register, | |
1616 | err.count_register_hi, | |
1617 | err.count_register, | |
1618 | err.lba_high_register_hi, | |
1619 | err.lba_mid_register_hi, | |
1620 | err.lba_low_register_hi, | |
1621 | err.lba_high_register, | |
1622 | err.lba_mid_register, | |
1623 | err.lba_low_register, | |
1624 | err.device_register, | |
1625 | err.device_control_register); | |
1626 | ||
1627 | // Add a description of the contents of the status and error registers | |
1628 | // if possible | |
1629 | char descbuf[256]; | |
1630 | const char * st_er_desc = construct_st_er_desc(descbuf, &entry); | |
1631 | if (st_er_desc) | |
1632 | pout(" %s", st_er_desc); | |
1633 | pout("\n\n"); | |
1634 | ||
1635 | // Print command history | |
1636 | pout(" Commands leading to the command that caused the error were:\n" | |
1637 | " CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name\n" | |
1638 | " -- == -- == -- == == == -- -- -- -- -- --------------- --------------------\n"); | |
1639 | for (int ci = 4; ci >= 0; ci--) { | |
1640 | const ata_smart_exterrlog_command & cmd = entry.commands[ci]; | |
1641 | ||
1642 | // Skip unused entries | |
1643 | if (!nonempty(&cmd, sizeof(cmd))) | |
1644 | continue; | |
1645 | ||
1646 | // Print registers, timestamp and ATA command name | |
1647 | char timestring[32]; | |
1648 | MsecToText(cmd.timestamp, timestring); | |
1649 | ||
1650 | pout(" %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n", | |
1651 | cmd.command_register, | |
1652 | cmd.features_register_hi, | |
1653 | cmd.features_register, | |
1654 | cmd.count_register_hi, | |
1655 | cmd.count_register, | |
1656 | cmd.lba_high_register_hi, | |
1657 | cmd.lba_mid_register_hi, | |
1658 | cmd.lba_low_register_hi, | |
1659 | cmd.lba_high_register, | |
1660 | cmd.lba_mid_register, | |
1661 | cmd.lba_low_register, | |
1662 | cmd.device_register, | |
1663 | cmd.device_control_register, | |
1664 | timestring, | |
1665 | look_up_ata_command(cmd.command_register, cmd.features_register)); | |
1666 | } | |
1667 | pout("\n"); | |
1668 | } | |
1669 | ||
1670 | print_on(); | |
1671 | if (printing_is_switchable) | |
1672 | pout("\n"); | |
1673 | print_off(); | |
1674 | return log->device_error_count; | |
1675 | } | |
1676 | ||
1677 | // Print SMART Extended Self-test Log (GP Log 0x07) | |
1678 | static int PrintSmartExtSelfTestLog(const ata_smart_extselftestlog * log, | |
1679 | unsigned nsectors, unsigned max_entries) | |
1680 | { | |
1681 | pout("SMART Extended Self-test Log Version: %u (%u sectors)\n", | |
1682 | log->version, nsectors); | |
1683 | ||
1684 | if (!log->log_desc_index){ | |
1685 | pout("No self-tests have been logged. [To run self-tests, use: smartctl -t]\n\n"); | |
1686 | return 0; | |
1687 | } | |
1688 | ||
1689 | // Check index | |
1690 | unsigned nentries = nsectors * 19; | |
1691 | unsigned logidx = log->log_desc_index; | |
1692 | if (logidx > nentries) { | |
1693 | pout("Invalid Self-test Log index = 0x%04x (reserved = 0x%02x)\n", logidx, log->reserved1); | |
1694 | return 0; | |
1695 | } | |
1696 | ||
1697 | // Index base is not clearly specified by ATA8-ACS (T13/1699-D Revision 6a), | |
1698 | // it is 1-based in practice. | |
1699 | logidx--; | |
1700 | ||
1701 | bool print_header = true; | |
1702 | int errcnt = 0, igncnt = 0; | |
1703 | int ext_ok_testnum = -1; | |
1704 | ||
1705 | // Iterate through circular buffer in reverse direction | |
1706 | for (unsigned i = 0, testnum = 1; | |
1707 | i < nentries && testnum <= max_entries; | |
1708 | i++, logidx = (logidx > 0 ? logidx - 1 : nentries - 1)) { | |
1709 | ||
1710 | const ata_smart_extselftestlog_desc & entry = log[logidx / 19].log_descs[logidx % 19]; | |
1711 | ||
1712 | // Skip unused entries | |
1713 | if (!nonempty(&entry, sizeof(entry))) | |
1714 | continue; | |
1715 | ||
1716 | // Get LBA | |
1717 | const unsigned char * b = entry.failing_lba; | |
1718 | uint64_t lba48 = b[0] | |
1719 | | ( b[1] << 8) | |
1720 | | ( b[2] << 16) | |
1721 | | ((uint64_t)b[3] << 24) | |
1722 | | ((uint64_t)b[4] << 32) | |
1723 | | ((uint64_t)b[5] << 40); | |
1724 | ||
1725 | // Print entry | |
1726 | int state = ataPrintSmartSelfTestEntry(testnum, entry.self_test_type, | |
1727 | entry.self_test_status, entry.timestamp, lba48, | |
1728 | false /*!print_error_only*/, print_header); | |
1729 | ||
1730 | if (state < 0) { | |
1731 | // Self-test showed an error | |
1732 | if (ext_ok_testnum < 0) | |
1733 | errcnt++; | |
1734 | else | |
1735 | // Newer successful extended self-test exits | |
1736 | igncnt++; | |
1737 | } | |
1738 | else if (state > 0 && ext_ok_testnum < 0) { | |
1739 | // Latest successful extended self-test | |
1740 | ext_ok_testnum = testnum; | |
1741 | } | |
1742 | testnum++; | |
1743 | } | |
1744 | ||
1745 | if (igncnt) | |
1746 | pout("%d of %d failed self-tests are outdated by newer successful extended offline self-test #%2d\n", | |
1747 | igncnt, igncnt+errcnt, ext_ok_testnum); | |
1748 | ||
1749 | pout("\n"); | |
1750 | return errcnt; | |
1751 | } | |
1752 | ||
1753 | static void ataPrintSelectiveSelfTestLog(const ata_selective_self_test_log * log, const ata_smart_values * sv) | |
1754 | { | |
1755 | int i,field1,field2; | |
1756 | const char *msg; | |
1757 | char tmp[64]; | |
1758 | uint64_t maxl=0,maxr=0; | |
1759 | uint64_t current=log->currentlba; | |
1760 | uint64_t currentend=current+65535; | |
1761 | ||
1762 | // print data structure revision number | |
1763 | pout("SMART Selective self-test log data structure revision number %d\n",(int)log->logversion); | |
1764 | if (1 != log->logversion) | |
1765 | pout("Note: revision number not 1 implies that no selective self-test has ever been run\n"); | |
1766 | ||
1767 | switch((sv->self_test_exec_status)>>4){ | |
1768 | case 0:msg="Completed"; | |
1769 | break; | |
1770 | case 1:msg="Aborted_by_host"; | |
1771 | break; | |
1772 | case 2:msg="Interrupted"; | |
1773 | break; | |
1774 | case 3:msg="Fatal_error"; | |
1775 | break; | |
1776 | case 4:msg="Completed_unknown_failure"; | |
1777 | break; | |
1778 | case 5:msg="Completed_electrical_failure"; | |
1779 | break; | |
1780 | case 6:msg="Completed_servo/seek_failure"; | |
1781 | break; | |
1782 | case 7:msg="Completed_read_failure"; | |
1783 | break; | |
1784 | case 8:msg="Completed_handling_damage??"; | |
1785 | break; | |
1786 | case 15:msg="Self_test_in_progress"; | |
1787 | break; | |
1788 | default:msg="Unknown_status "; | |
1789 | break; | |
1790 | } | |
1791 | ||
1792 | // find the number of columns needed for printing. If in use, the | |
1793 | // start/end of span being read-scanned... | |
1794 | if (log->currentspan>5) { | |
1795 | maxl=current; | |
1796 | maxr=currentend; | |
1797 | } | |
1798 | for (i=0; i<5; i++) { | |
1799 | uint64_t start=log->span[i].start; | |
1800 | uint64_t end =log->span[i].end; | |
1801 | // ... plus max start/end of each of the five test spans. | |
1802 | if (start>maxl) | |
1803 | maxl=start; | |
1804 | if (end > maxr) | |
1805 | maxr=end; | |
1806 | } | |
1807 | ||
1808 | // we need at least 7 characters wide fields to accomodate the | |
1809 | // labels | |
1810 | if ((field1=snprintf(tmp,64, "%"PRIu64, maxl))<7) | |
1811 | field1=7; | |
1812 | if ((field2=snprintf(tmp,64, "%"PRIu64, maxr))<7) | |
1813 | field2=7; | |
1814 | ||
1815 | // now print the five test spans | |
1816 | pout(" SPAN %*s %*s CURRENT_TEST_STATUS\n", field1, "MIN_LBA", field2, "MAX_LBA"); | |
1817 | ||
1818 | for (i=0; i<5; i++) { | |
1819 | uint64_t start=log->span[i].start; | |
1820 | uint64_t end=log->span[i].end; | |
1821 | ||
1822 | if ((i+1)==(int)log->currentspan) | |
1823 | // this span is currently under test | |
1824 | pout(" %d %*"PRIu64" %*"PRIu64" %s [%01d0%% left] (%"PRIu64"-%"PRIu64")\n", | |
1825 | i+1, field1, start, field2, end, msg, | |
1826 | (int)(sv->self_test_exec_status & 0xf), current, currentend); | |
1827 | else | |
1828 | // this span is not currently under test | |
1829 | pout(" %d %*"PRIu64" %*"PRIu64" Not_testing\n", | |
1830 | i+1, field1, start, field2, end); | |
1831 | } | |
1832 | ||
1833 | // if we are currently read-scanning, print LBAs and the status of | |
1834 | // the read scan | |
1835 | if (log->currentspan>5) | |
1836 | pout("%5d %*"PRIu64" %*"PRIu64" Read_scanning %s\n", | |
1837 | (int)log->currentspan, field1, current, field2, currentend, | |
1838 | OfflineDataCollectionStatus(sv->offline_data_collection_status)); | |
1839 | ||
1840 | /* Print selective self-test flags. Possible flag combinations are | |
1841 | (numbering bits from 0-15): | |
1842 | Bit-1 Bit-3 Bit-4 | |
1843 | Scan Pending Active | |
1844 | 0 * * Don't scan | |
1845 | 1 0 0 Will carry out scan after selective test | |
1846 | 1 1 0 Waiting to carry out scan after powerup | |
1847 | 1 0 1 Currently scanning | |
1848 | 1 1 1 Currently scanning | |
1849 | */ | |
1850 | ||
1851 | pout("Selective self-test flags (0x%x):\n", (unsigned int)log->flags); | |
1852 | if (log->flags & SELECTIVE_FLAG_DOSCAN) { | |
1853 | if (log->flags & SELECTIVE_FLAG_ACTIVE) | |
1854 | pout(" Currently read-scanning the remainder of the disk.\n"); | |
1855 | else if (log->flags & SELECTIVE_FLAG_PENDING) | |
1856 | pout(" Read-scan of remainder of disk interrupted; will resume %d min after power-up.\n", | |
1857 | (int)log->pendingtime); | |
1858 | else | |
1859 | pout(" After scanning selected spans, read-scan remainder of disk.\n"); | |
1860 | } | |
1861 | else | |
1862 | pout(" After scanning selected spans, do NOT read-scan remainder of disk.\n"); | |
1863 | ||
1864 | // print pending time | |
1865 | pout("If Selective self-test is pending on power-up, resume after %d minute delay.\n", | |
1866 | (int)log->pendingtime); | |
1867 | ||
1868 | return; | |
1869 | } | |
1870 | ||
1871 | // Format SCT Temperature value | |
1872 | static const char * sct_ptemp(signed char x, char * buf) | |
1873 | { | |
1874 | if (x == -128 /*0x80 = unknown*/) | |
1875 | strcpy(buf, " ?"); | |
1876 | else | |
1877 | sprintf(buf, "%2d", x); | |
1878 | return buf; | |
1879 | } | |
1880 | ||
1881 | static const char * sct_pbar(int x, char * buf) | |
1882 | { | |
1883 | if (x <= 19) | |
1884 | x = 0; | |
1885 | else | |
1886 | x -= 19; | |
1887 | bool ov = false; | |
1888 | if (x > 40) { | |
1889 | x = 40; ov = true; | |
1890 | } | |
1891 | if (x > 0) { | |
1892 | memset(buf, '*', x); | |
1893 | if (ov) | |
1894 | buf[x-1] = '+'; | |
1895 | buf[x] = 0; | |
1896 | } | |
1897 | else { | |
1898 | buf[0] = '-'; buf[1] = 0; | |
1899 | } | |
1900 | return buf; | |
1901 | } | |
1902 | ||
1903 | static const char * sct_device_state_msg(unsigned char state) | |
1904 | { | |
1905 | switch (state) { | |
1906 | case 0: return "Active"; | |
1907 | case 1: return "Stand-by"; | |
1908 | case 2: return "Sleep"; | |
1909 | case 3: return "DST executing in background"; | |
1910 | case 4: return "SMART Off-line Data Collection executing in background"; | |
1911 | case 5: return "SCT command executing in background"; | |
1912 | default:return "Unknown"; | |
1913 | } | |
1914 | } | |
1915 | ||
1916 | // Print SCT Status | |
1917 | static int ataPrintSCTStatus(const ata_sct_status_response * sts) | |
1918 | { | |
1919 | pout("SCT Status Version: %u\n", sts->format_version); | |
1920 | pout("SCT Version (vendor specific): %u (0x%04x)\n", sts->sct_version, sts->sct_version); | |
1921 | pout("SCT Support Level: %u\n", sts->sct_spec); | |
1922 | pout("Device State: %s (%u)\n", | |
1923 | sct_device_state_msg(sts->device_state), sts->device_state); | |
1924 | char buf1[20], buf2[20]; | |
1925 | if ( !sts->min_temp && !sts->life_min_temp | |
1926 | && !sts->under_limit_count && !sts->over_limit_count) { | |
1927 | // "Reserved" fields not set, assume "old" format version 2 | |
1928 | // Table 11 of T13/1701DT-N (SMART Command Transport) Revision 5, February 2005 | |
1929 | // Table 54 of T13/1699-D (ATA8-ACS) Revision 3e, July 2006 | |
1930 | pout("Current Temperature: %s Celsius\n", | |
1931 | sct_ptemp(sts->hda_temp, buf1)); | |
1932 | pout("Power Cycle Max Temperature: %s Celsius\n", | |
1933 | sct_ptemp(sts->max_temp, buf2)); | |
1934 | pout("Lifetime Max Temperature: %s Celsius\n", | |
1935 | sct_ptemp(sts->life_max_temp, buf2)); | |
1936 | } | |
1937 | else { | |
1938 | // Assume "new" format version 2 or version 3 | |
1939 | // T13/e06152r0-3 (Additional SCT Temperature Statistics), August - October 2006 | |
1940 | // Table 60 of T13/1699-D (ATA8-ACS) Revision 3f, December 2006 (format version 2) | |
1941 | // Table 80 of T13/1699-D (ATA8-ACS) Revision 6a, September 2008 (format version 3) | |
1942 | pout("Current Temperature: %s Celsius\n", | |
1943 | sct_ptemp(sts->hda_temp, buf1)); | |
1944 | pout("Power Cycle Min/Max Temperature: %s/%s Celsius\n", | |
1945 | sct_ptemp(sts->min_temp, buf1), sct_ptemp(sts->max_temp, buf2)); | |
1946 | pout("Lifetime Min/Max Temperature: %s/%s Celsius\n", | |
1947 | sct_ptemp(sts->life_min_temp, buf1), sct_ptemp(sts->life_max_temp, buf2)); | |
1948 | signed char avg = sts->byte205; // Average Temperature from e06152r0-2, removed in e06152r3 | |
1949 | if (0 < avg && sts->life_min_temp <= avg && avg <= sts->life_max_temp) | |
1950 | pout("Lifetime Average Temperature: %2d Celsius\n", avg); | |
1951 | pout("Under/Over Temperature Limit Count: %2u/%u\n", | |
1952 | sts->under_limit_count, sts->over_limit_count); | |
1953 | } | |
1954 | return 0; | |
1955 | } | |
1956 | ||
1957 | // Print SCT Temperature History Table | |
1958 | static int ataPrintSCTTempHist(const ata_sct_temperature_history_table * tmh) | |
1959 | { | |
1960 | char buf1[20], buf2[80]; | |
1961 | pout("SCT Temperature History Version: %u\n", tmh->format_version); | |
1962 | pout("Temperature Sampling Period: %u minute%s\n", | |
1963 | tmh->sampling_period, (tmh->sampling_period==1?"":"s")); | |
1964 | pout("Temperature Logging Interval: %u minute%s\n", | |
1965 | tmh->interval, (tmh->interval==1?"":"s")); | |
1966 | pout("Min/Max recommended Temperature: %s/%s Celsius\n", | |
1967 | sct_ptemp(tmh->min_op_limit, buf1), sct_ptemp(tmh->max_op_limit, buf2)); | |
1968 | pout("Min/Max Temperature Limit: %s/%s Celsius\n", | |
1969 | sct_ptemp(tmh->under_limit, buf1), sct_ptemp(tmh->over_limit, buf2)); | |
1970 | pout("Temperature History Size (Index): %u (%u)\n", tmh->cb_size, tmh->cb_index); | |
1971 | if (!(0 < tmh->cb_size && tmh->cb_size <= sizeof(tmh->cb) && tmh->cb_index < tmh->cb_size)) { | |
1972 | pout("Error invalid Temperature History Size or Index\n"); | |
1973 | return 0; | |
1974 | } | |
1975 | ||
1976 | // Print table | |
1977 | pout("\nIndex Estimated Time Temperature Celsius\n"); | |
1978 | unsigned n = 0, i = (tmh->cb_index+1) % tmh->cb_size; | |
1979 | unsigned interval = (tmh->interval > 0 ? tmh->interval : 1); | |
1980 | time_t t = time(0) - (tmh->cb_size-1) * interval * 60; | |
1981 | t -= t % (interval * 60); | |
1982 | while (n < tmh->cb_size) { | |
1983 | // Find range of identical temperatures | |
1984 | unsigned n1 = n, n2 = n+1, i2 = (i+1) % tmh->cb_size; | |
1985 | while (n2 < tmh->cb_size && tmh->cb[i2] == tmh->cb[i]) { | |
1986 | n2++; i2 = (i2+1) % tmh->cb_size; | |
1987 | } | |
1988 | // Print range | |
1989 | while (n < n2) { | |
1990 | if (n == n1 || n == n2-1 || n2 <= n1+3) { | |
1991 | char date[30]; | |
1992 | // TODO: Don't print times < boot time | |
1993 | strftime(date, sizeof(date), "%Y-%m-%d %H:%M", localtime(&t)); | |
1994 | pout(" %3u %s %s %s\n", i, date, | |
1995 | sct_ptemp(tmh->cb[i], buf1), sct_pbar(tmh->cb[i], buf2)); | |
1996 | } | |
1997 | else if (n == n1+1) { | |
1998 | pout(" ... ..(%3u skipped). .. %s\n", | |
1999 | n2-n1-2, sct_pbar(tmh->cb[i], buf2)); | |
2000 | } | |
2001 | t += interval * 60; i = (i+1) % tmh->cb_size; n++; | |
2002 | } | |
2003 | } | |
2004 | //assert(n == tmh->cb_size && i == (tmh->cb_index+1) % tmh->cb_size); | |
2005 | ||
2006 | return 0; | |
2007 | } | |
2008 | ||
2009 | // Print SCT Error Recovery Control timers | |
2010 | static void ataPrintSCTErrorRecoveryControl(bool set, unsigned short read_timer, unsigned short write_timer) | |
2011 | { | |
2012 | pout("SCT Error Recovery Control%s:\n", (set ? " set to" : "")); | |
2013 | if (!read_timer) | |
2014 | pout(" Read: Disabled\n"); | |
2015 | else | |
2016 | pout(" Read: %6d (%0.1f seconds)\n", read_timer, read_timer/10.0); | |
2017 | if (!write_timer) | |
2018 | pout(" Write: Disabled\n"); | |
2019 | else | |
2020 | pout(" Write: %6d (%0.1f seconds)\n", write_timer, write_timer/10.0); | |
2021 | } | |
2022 | ||
2023 | static void print_aam_level(const char * msg, int level, int recommended = -1) | |
2024 | { | |
2025 | // Table 56 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008 | |
2026 | // Obsolete since T13/2015-D (ACS-2) Revision 4a, December 9, 2010 | |
2027 | const char * s; | |
2028 | if (level == 0) | |
2029 | s = "vendor specific"; | |
2030 | else if (level < 128) | |
2031 | s = "unknown/retired"; | |
2032 | else if (level == 128) | |
2033 | s = "quiet"; | |
2034 | else if (level < 254) | |
2035 | s = "intermediate"; | |
2036 | else if (level == 254) | |
2037 | s = "maximum performance"; | |
2038 | else | |
2039 | s = "reserved"; | |
2040 | ||
2041 | if (recommended >= 0) | |
2042 | pout("%s%d (%s), recommended: %d\n", msg, level, s, recommended); | |
2043 | else | |
2044 | pout("%s%d (%s)\n", msg, level, s); | |
2045 | } | |
2046 | ||
2047 | static void print_apm_level(const char * msg, int level) | |
2048 | { | |
2049 | // Table 120 of T13/2015-D (ACS-2) Revision 7, June 22, 2011 | |
2050 | const char * s; | |
2051 | if (!(1 <= level && level <= 254)) | |
2052 | s = "reserved"; | |
2053 | else if (level == 1) | |
2054 | s = "minimum power consumption with standby"; | |
2055 | else if (level < 128) | |
2056 | s = "intermediate level with standby"; | |
2057 | else if (level == 128) | |
2058 | s = "minimum power consumption without standby"; | |
2059 | else if (level < 254) | |
2060 | s = "intermediate level without standby"; | |
2061 | else | |
2062 | s = "maximum performance"; | |
2063 | ||
2064 | pout("%s%d (%s)\n", msg, level, s); | |
2065 | } | |
2066 | ||
2067 | static void print_ata_security_status(const char * msg, unsigned short state) | |
2068 | { | |
2069 | const char * s1, * s2 = "", * s3 = "", * s4 = ""; | |
2070 | ||
2071 | // Table 6 of T13/2015-D (ACS-2) Revision 7, June 22, 2011 | |
2072 | if (!(state & 0x0001)) | |
2073 | s1 = "Unavailable"; | |
2074 | else if (!(state & 0x0002)) { | |
2075 | s1 = "Disabled, "; | |
2076 | if (!(state & 0x0008)) | |
2077 | s2 = "NOT FROZEN [SEC1]"; | |
2078 | else | |
2079 | s2 = "frozen [SEC2]"; | |
2080 | } | |
2081 | else { | |
2082 | s1 = "ENABLED, PW level "; | |
2083 | if (!(state & 0x0020)) | |
2084 | s2 = "HIGH"; | |
2085 | else | |
2086 | s2 = "MAX"; | |
2087 | ||
2088 | if (!(state & 0x0004)) { | |
2089 | s3 = ", not locked, "; | |
2090 | if (!(state & 0x0008)) | |
2091 | s4 = "not frozen [SEC5]"; | |
2092 | else | |
2093 | s4 = "frozen [SEC6]"; | |
2094 | } | |
2095 | else { | |
2096 | s3 = ", **LOCKED** [SEC4]"; | |
2097 | if (state & 0x0010) | |
2098 | s4 = ", PW ATTEMPTS EXCEEDED"; | |
2099 | } | |
2100 | } | |
2101 | ||
2102 | pout("%s%s%s%s%s\n", msg, s1, s2, s3, s4); | |
2103 | } | |
2104 | ||
2105 | static void print_standby_timer(const char * msg, int timer, const ata_identify_device & drive) | |
2106 | { | |
2107 | const char * s1 = 0; | |
2108 | int hours = 0, minutes = 0 , seconds = 0; | |
2109 | ||
2110 | // Table 63 of T13/2015-D (ACS-2) Revision 7, June 22, 2011 | |
2111 | if (timer == 0) | |
2112 | s1 = "disabled"; | |
2113 | else if (timer <= 240) | |
2114 | seconds = timer * 5, minutes = seconds / 60, seconds %= 60; | |
2115 | else if (timer <= 251) | |
2116 | minutes = (timer - 240) * 30, hours = minutes / 60, minutes %= 60; | |
2117 | else if (timer == 252) | |
2118 | minutes = 21; | |
2119 | else if (timer == 253) | |
2120 | s1 = "between 8 hours and 12 hours"; | |
2121 | else if (timer == 255) | |
2122 | minutes = 21, seconds = 15; | |
2123 | else | |
2124 | s1 = "reserved"; | |
2125 | ||
2126 | const char * s2 = "", * s3 = ""; | |
2127 | if (!(drive.words047_079[49-47] & 0x2000)) | |
2128 | s2 = " or vendor-specific"; | |
2129 | if (timer > 0 && (drive.words047_079[50-47] & 0xc001) == 0x4001) | |
2130 | s3 = ", a vendor-specific minimum applies"; | |
2131 | ||
2132 | if (s1) | |
2133 | pout("%s%d (%s%s%s)\n", msg, timer, s1, s2, s3); | |
2134 | else | |
2135 | pout("%s%d (%02d:%02d:%02d%s%s)\n", msg, timer, hours, minutes, seconds, s2, s3); | |
2136 | } | |
2137 | ||
2138 | ||
2139 | int ataPrintMain (ata_device * device, const ata_print_options & options) | |
2140 | { | |
2141 | // If requested, check power mode first | |
2142 | const char * powername = 0; | |
2143 | bool powerchg = false; | |
2144 | if (options.powermode) { | |
2145 | unsigned char powerlimit = 0xff; | |
2146 | int powermode = ataCheckPowerMode(device); | |
2147 | switch (powermode) { | |
2148 | case -1: | |
2149 | if (device->is_syscall_unsup()) { | |
2150 | pout("CHECK POWER MODE not implemented, ignoring -n option\n"); break; | |
2151 | } | |
2152 | powername = "SLEEP"; powerlimit = 2; | |
2153 | break; | |
2154 | case 0: | |
2155 | powername = "STANDBY"; powerlimit = 3; break; | |
2156 | case 0x80: | |
2157 | powername = "IDLE"; powerlimit = 4; break; | |
2158 | case 0xff: | |
2159 | powername = "ACTIVE or IDLE"; break; | |
2160 | default: | |
2161 | pout("CHECK POWER MODE returned unknown value 0x%02x, ignoring -n option\n", powermode); | |
2162 | break; | |
2163 | } | |
2164 | if (powername) { | |
2165 | if (options.powermode >= powerlimit) { | |
2166 | pout("Device is in %s mode, exit(%d)\n", powername, FAILPOWER); | |
2167 | return FAILPOWER; | |
2168 | } | |
2169 | powerchg = (powermode != 0xff); // SMART tests will spin up drives | |
2170 | } | |
2171 | } | |
2172 | ||
2173 | // SMART values needed ? | |
2174 | bool need_smart_val = ( | |
2175 | options.smart_check_status | |
2176 | || options.smart_general_values | |
2177 | || options.smart_vendor_attrib | |
2178 | || options.smart_error_log | |
2179 | || options.smart_selftest_log | |
2180 | || options.smart_selective_selftest_log | |
2181 | || options.smart_ext_error_log | |
2182 | || options.smart_ext_selftest_log | |
2183 | || options.smart_auto_offl_enable | |
2184 | || options.smart_auto_offl_disable | |
2185 | || options.smart_selftest_type != -1 | |
2186 | ); | |
2187 | ||
2188 | // SMART must be enabled ? | |
2189 | bool need_smart_enabled = ( | |
2190 | need_smart_val | |
2191 | || options.smart_auto_save_enable | |
2192 | || options.smart_auto_save_disable | |
2193 | ); | |
2194 | ||
2195 | // SMART feature set needed ? | |
2196 | bool need_smart_support = ( | |
2197 | need_smart_enabled | |
2198 | || options.smart_enable | |
2199 | || options.smart_disable | |
2200 | ); | |
2201 | ||
2202 | // SMART and GP log directories needed ? | |
2203 | bool need_smart_logdir = options.smart_logdir; | |
2204 | ||
2205 | bool need_gp_logdir = ( | |
2206 | options.gp_logdir | |
2207 | || options.smart_ext_error_log | |
2208 | || options.smart_ext_selftest_log | |
2209 | || options.sataphy | |
2210 | || options.devstat_all_pages | |
2211 | || options.devstat_ssd_page | |
2212 | || !options.devstat_pages.empty() | |
2213 | ); | |
2214 | ||
2215 | unsigned i; | |
2216 | for (i = 0; i < options.log_requests.size(); i++) { | |
2217 | if (options.log_requests[i].gpl) | |
2218 | need_gp_logdir = true; | |
2219 | else | |
2220 | need_smart_logdir = true; | |
2221 | } | |
2222 | ||
2223 | // SCT commands needed ? | |
2224 | bool need_sct_support = ( | |
2225 | options.sct_temp_sts | |
2226 | || options.sct_temp_hist | |
2227 | || options.sct_temp_int | |
2228 | || options.sct_erc_get | |
2229 | || options.sct_erc_set | |
2230 | ); | |
2231 | ||
2232 | // Exit if no further options specified | |
2233 | if (!( options.drive_info || need_smart_support | |
2234 | || need_smart_logdir || need_gp_logdir | |
2235 | || need_sct_support || options.get_set_used)) { | |
2236 | if (powername) | |
2237 | pout("Device is in %s mode\n", powername); | |
2238 | else | |
2239 | pout("ATA device successfully opened\n\n" | |
2240 | "Use 'smartctl -a' (or '-x') to print SMART (and more) information\n\n"); | |
2241 | return 0; | |
2242 | } | |
2243 | ||
2244 | // Start by getting Drive ID information. We need this, to know if SMART is supported. | |
2245 | int returnval = 0; | |
2246 | ata_identify_device drive; memset(&drive, 0, sizeof(drive)); | |
2247 | device->clear_err(); | |
2248 | int retid = ata_read_identity(device, &drive, options.fix_swapped_id); | |
2249 | if (retid < 0) { | |
2250 | pout("Smartctl: Device Read Identity Failed: %s\n\n", | |
2251 | (device->get_errno() ? device->get_errmsg() : "Unknown error")); | |
2252 | failuretest(MANDATORY_CMD, returnval|=FAILID); | |
2253 | } | |
2254 | else if (!nonempty(&drive, sizeof(drive))) { | |
2255 | pout("Smartctl: Device Read Identity Failed: empty IDENTIFY data\n\n"); | |
2256 | failuretest(MANDATORY_CMD, returnval|=FAILID); | |
2257 | } | |
2258 | ||
2259 | // If requested, show which presets would be used for this drive and exit. | |
2260 | if (options.show_presets) { | |
2261 | show_presets(&drive); | |
2262 | return 0; | |
2263 | } | |
2264 | ||
2265 | // Use preset vendor attribute options unless user has requested otherwise. | |
2266 | ata_vendor_attr_defs attribute_defs = options.attribute_defs; | |
2267 | unsigned char fix_firmwarebug = options.fix_firmwarebug; | |
2268 | const drive_settings * dbentry = 0; | |
2269 | if (!options.ignore_presets) | |
2270 | dbentry = lookup_drive_apply_presets(&drive, attribute_defs, | |
2271 | fix_firmwarebug); | |
2272 | ||
2273 | // Get capacity and sector sizes | |
2274 | ata_size_info sizes; | |
2275 | ata_get_size_info(&drive, sizes); | |
2276 | ||
2277 | // Print most drive identity information if requested | |
2278 | if (options.drive_info) { | |
2279 | pout("=== START OF INFORMATION SECTION ===\n"); | |
2280 | print_drive_info(&drive, sizes, dbentry); | |
2281 | } | |
2282 | ||
2283 | // Check and print SMART support and state | |
2284 | int smart_supported = -1, smart_enabled = -1; | |
2285 | if (need_smart_support || options.drive_info) { | |
2286 | ||
2287 | // Packet device ? | |
2288 | if (retid > 0) { | |
2289 | pout("SMART support is: Unavailable - Packet Interface Devices [this device: %s] don't support ATA SMART\n", | |
2290 | packetdevicetype(retid-1)); | |
2291 | } | |
2292 | else { | |
2293 | // Disk device: SMART supported and enabled ? | |
2294 | smart_supported = ataSmartSupport(&drive); | |
2295 | smart_enabled = ataIsSmartEnabled(&drive); | |
2296 | ||
2297 | if (smart_supported < 0) | |
2298 | pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.\n"); | |
2299 | if (smart_supported && smart_enabled < 0) { | |
2300 | pout("SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.\n"); | |
2301 | if (need_smart_support) { | |
2302 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
2303 | // check SMART support by trying a command | |
2304 | pout(" Checking to be sure by trying SMART RETURN STATUS command.\n"); | |
2305 | if (ataDoesSmartWork(device)) | |
2306 | smart_supported = smart_enabled = 1; | |
2307 | } | |
2308 | } | |
2309 | else if (smart_supported < 0 && (smart_enabled > 0 || dbentry)) | |
2310 | // Assume supported if enabled or in drive database | |
2311 | smart_supported = 1; | |
2312 | ||
2313 | if (smart_supported < 0) | |
2314 | pout("SMART support is: Unknown - Try option -s with argument 'on' to enable it."); | |
2315 | else if (!smart_supported) | |
2316 | pout("SMART support is: Unavailable - device lacks SMART capability.\n"); | |
2317 | else { | |
2318 | if (options.drive_info) | |
2319 | pout("SMART support is: Available - device has SMART capability.\n"); | |
2320 | if (smart_enabled >= 0) { | |
2321 | if (device->ata_identify_is_cached()) { | |
2322 | if (options.drive_info) | |
2323 | pout(" %sabled status cached by OS, trying SMART RETURN STATUS cmd.\n", | |
2324 | (smart_enabled?"En":"Dis")); | |
2325 | smart_enabled = ataDoesSmartWork(device); | |
2326 | } | |
2327 | if (options.drive_info) | |
2328 | pout("SMART support is: %s\n", | |
2329 | (smart_enabled ? "Enabled" : "Disabled")); | |
2330 | } | |
2331 | } | |
2332 | } | |
2333 | } | |
2334 | ||
2335 | // Print AAM status | |
2336 | if (options.get_aam) { | |
2337 | if ((drive.command_set_2 & 0xc200) != 0x4200) // word083 | |
2338 | pout("AAM feature is: Unavailable\n"); | |
2339 | else if (!(drive.word086 & 0x0200)) | |
2340 | pout("AAM feature is: Disabled\n"); | |
2341 | else | |
2342 | print_aam_level("AAM level is: ", drive.words088_255[94-88] & 0xff, | |
2343 | drive.words088_255[94-88] >> 8); | |
2344 | } | |
2345 | ||
2346 | // Print APM status | |
2347 | if (options.get_apm) { | |
2348 | if ((drive.command_set_2 & 0xc008) != 0x4008) // word083 | |
2349 | pout("APM feature is: Unavailable\n"); | |
2350 | else if (!(drive.word086 & 0x0008)) | |
2351 | pout("APM feature is: Disabled\n"); | |
2352 | else | |
2353 | print_apm_level("APM level is: ", drive.words088_255[91-88] & 0xff); | |
2354 | } | |
2355 | ||
2356 | // Print read look-ahead status | |
2357 | if (options.get_lookahead) { | |
2358 | pout("Rd look-ahead is: %s\n", | |
2359 | ( (drive.command_set_2 & 0xc000) != 0x4000 // word083 | |
2360 | || !(drive.command_set_1 & 0x0040)) ? "Unavailable" : // word082 | |
2361 | !(drive.cfs_enable_1 & 0x0040) ? "Disabled" : "Enabled"); // word085 | |
2362 | } | |
2363 | ||
2364 | // Print write cache status | |
2365 | if (options.get_wcache) { | |
2366 | pout("Write cache is: %s\n", | |
2367 | ( (drive.command_set_2 & 0xc000) != 0x4000 // word083 | |
2368 | || !(drive.command_set_1 & 0x0020)) ? "Unavailable" : // word082 | |
2369 | !(drive.cfs_enable_1 & 0x0020) ? "Disabled" : "Enabled"); // word085 | |
2370 | } | |
2371 | ||
2372 | // Print ATA security status | |
2373 | if (options.get_security) | |
2374 | print_ata_security_status("ATA Security is: ", drive.words088_255[128-88]); | |
2375 | ||
2376 | // Print remaining drive info | |
2377 | if (options.drive_info) { | |
2378 | // Print the (now possibly changed) power mode if available | |
2379 | if (powername) | |
2380 | pout("Power mode %s %s\n", (powerchg?"was:":"is: "), powername); | |
2381 | pout("\n"); | |
2382 | } | |
2383 | ||
2384 | // Exit if SMART is not supported but must be available to proceed | |
2385 | if (smart_supported <= 0 && need_smart_support) | |
2386 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
2387 | ||
2388 | // START OF THE ENABLE/DISABLE SECTION OF THE CODE | |
2389 | if ( options.smart_disable || options.smart_enable | |
2390 | || options.smart_auto_save_disable || options.smart_auto_save_enable | |
2391 | || options.smart_auto_offl_disable || options.smart_auto_offl_enable) | |
2392 | pout("=== START OF ENABLE/DISABLE COMMANDS SECTION ===\n"); | |
2393 | ||
2394 | // Enable/Disable AAM | |
2395 | if (options.set_aam) { | |
2396 | if (options.set_aam > 0) { | |
2397 | if (!ata_set_features(device, ATA_ENABLE_AAM, options.set_aam-1)) { | |
2398 | pout("AAM enable failed: %s\n", device->get_errmsg()); | |
2399 | returnval |= FAILSMART; | |
2400 | } | |
2401 | else | |
2402 | print_aam_level("AAM set to level ", options.set_aam-1); | |
2403 | } | |
2404 | else { | |
2405 | if (!ata_set_features(device, ATA_DISABLE_AAM)) { | |
2406 | pout("AAM disable failed: %s\n", device->get_errmsg()); | |
2407 | returnval |= FAILSMART; | |
2408 | } | |
2409 | else | |
2410 | pout("AAM disabled\n"); | |
2411 | } | |
2412 | } | |
2413 | ||
2414 | // Enable/Disable APM | |
2415 | if (options.set_apm) { | |
2416 | if (options.set_apm > 0) { | |
2417 | if (!ata_set_features(device, ATA_ENABLE_APM, options.set_apm-1)) { | |
2418 | pout("APM enable failed: %s\n", device->get_errmsg()); | |
2419 | returnval |= FAILSMART; | |
2420 | } | |
2421 | else | |
2422 | print_apm_level("APM set to level ", options.set_apm-1); | |
2423 | } | |
2424 | else { | |
2425 | if (!ata_set_features(device, ATA_DISABLE_APM)) { | |
2426 | pout("APM disable failed: %s\n", device->get_errmsg()); | |
2427 | returnval |= FAILSMART; | |
2428 | } | |
2429 | else | |
2430 | pout("APM disabled\n"); | |
2431 | } | |
2432 | } | |
2433 | ||
2434 | // Enable/Disable read look-ahead | |
2435 | if (options.set_lookahead) { | |
2436 | bool enable = (options.set_lookahead > 0); | |
2437 | if (!ata_set_features(device, (enable ? ATA_ENABLE_READ_LOOK_AHEAD : ATA_DISABLE_READ_LOOK_AHEAD))) { | |
2438 | pout("Read look-ahead %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg()); | |
2439 | returnval |= FAILSMART; | |
2440 | } | |
2441 | else | |
2442 | pout("Read look-ahead %sabled\n", (enable ? "en" : "dis")); | |
2443 | } | |
2444 | ||
2445 | // Enable/Disable write cache | |
2446 | if (options.set_wcache) { | |
2447 | bool enable = (options.set_wcache > 0); | |
2448 | if (!ata_set_features(device, (enable ? ATA_ENABLE_WRITE_CACHE : ATA_DISABLE_WRITE_CACHE))) { | |
2449 | pout("Write cache %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg()); | |
2450 | returnval |= FAILSMART; | |
2451 | } | |
2452 | else | |
2453 | pout("Write cache %sabled\n", (enable ? "en" : "dis")); | |
2454 | } | |
2455 | ||
2456 | // Freeze ATA security | |
2457 | if (options.set_security_freeze) { | |
2458 | if (!ata_nodata_command(device, ATA_SECURITY_FREEZE_LOCK)) { | |
2459 | pout("ATA SECURITY FREEZE LOCK failed: %s\n", device->get_errmsg()); | |
2460 | returnval |= FAILSMART; | |
2461 | } | |
2462 | else | |
2463 | pout("ATA Security set to frozen mode\n"); | |
2464 | } | |
2465 | ||
2466 | // Set standby timer | |
2467 | if (options.set_standby) { | |
2468 | if (!ata_nodata_command(device, ATA_IDLE, options.set_standby-1)) { | |
2469 | pout("ATA IDLE command failed: %s\n", device->get_errmsg()); | |
2470 | returnval |= FAILSMART; | |
2471 | } | |
2472 | else | |
2473 | print_standby_timer("Standby timer set to ", options.set_standby-1, drive); | |
2474 | } | |
2475 | ||
2476 | // Enable/Disable SMART commands | |
2477 | if (options.smart_enable) { | |
2478 | if (ataEnableSmart(device)) { | |
2479 | pout("Smartctl: SMART Enable Failed.\n\n"); | |
2480 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
2481 | } | |
2482 | else { | |
2483 | pout("SMART Enabled.\n"); | |
2484 | smart_enabled = 1; | |
2485 | } | |
2486 | } | |
2487 | ||
2488 | // Turn off SMART on device | |
2489 | if (options.smart_disable) { | |
2490 | if (ataDisableSmart(device)) { | |
2491 | pout( "Smartctl: SMART Disable Failed.\n\n"); | |
2492 | failuretest(MANDATORY_CMD,returnval|=FAILSMART); | |
2493 | } | |
2494 | } | |
2495 | ||
2496 | // Exit if SMART is disabled but must be enabled to proceed | |
2497 | if (options.smart_disable || (smart_enabled <= 0 && need_smart_enabled)) { | |
2498 | pout("SMART Disabled. Use option -s with argument 'on' to enable it.\n"); | |
2499 | return returnval; | |
2500 | } | |
2501 | ||
2502 | // Enable/Disable Auto-save attributes | |
2503 | if (options.smart_auto_save_enable) { | |
2504 | if (ataEnableAutoSave(device)){ | |
2505 | pout( "Smartctl: SMART Enable Attribute Autosave Failed.\n\n"); | |
2506 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
2507 | } | |
2508 | else | |
2509 | pout("SMART Attribute Autosave Enabled.\n"); | |
2510 | } | |
2511 | ||
2512 | if (options.smart_auto_save_disable) { | |
2513 | if (ataDisableAutoSave(device)){ | |
2514 | pout( "Smartctl: SMART Disable Attribute Autosave Failed.\n\n"); | |
2515 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
2516 | } | |
2517 | else | |
2518 | pout("SMART Attribute Autosave Disabled.\n"); | |
2519 | } | |
2520 | ||
2521 | // Read SMART values and thresholds if necessary | |
2522 | ata_smart_values smartval; memset(&smartval, 0, sizeof(smartval)); | |
2523 | ata_smart_thresholds_pvt smartthres; memset(&smartthres, 0, sizeof(smartthres)); | |
2524 | bool smart_val_ok = false, smart_thres_ok = false; | |
2525 | ||
2526 | if (need_smart_val) { | |
2527 | if (ataReadSmartValues(device, &smartval)) { | |
2528 | pout("Smartctl: SMART Read Values failed.\n\n"); | |
2529 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2530 | } | |
2531 | else { | |
2532 | smart_val_ok = true; | |
2533 | ||
2534 | if (options.smart_check_status || options.smart_vendor_attrib) { | |
2535 | if (ataReadSmartThresholds(device, &smartthres)){ | |
2536 | pout("Smartctl: SMART Read Thresholds failed.\n\n"); | |
2537 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2538 | } | |
2539 | else | |
2540 | smart_thres_ok = true; | |
2541 | } | |
2542 | } | |
2543 | } | |
2544 | ||
2545 | // Enable/Disable Off-line testing | |
2546 | bool needupdate = false; | |
2547 | if (options.smart_auto_offl_enable) { | |
2548 | if (!isSupportAutomaticTimer(&smartval)){ | |
2549 | pout("Warning: device does not support SMART Automatic Timers.\n\n"); | |
2550 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2551 | } | |
2552 | needupdate = smart_val_ok; | |
2553 | if (ataEnableAutoOffline(device)){ | |
2554 | pout( "Smartctl: SMART Enable Automatic Offline Failed.\n\n"); | |
2555 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2556 | } | |
2557 | else | |
2558 | pout("SMART Automatic Offline Testing Enabled every four hours.\n"); | |
2559 | } | |
2560 | ||
2561 | if (options.smart_auto_offl_disable) { | |
2562 | if (!isSupportAutomaticTimer(&smartval)){ | |
2563 | pout("Warning: device does not support SMART Automatic Timers.\n\n"); | |
2564 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2565 | } | |
2566 | needupdate = smart_val_ok; | |
2567 | if (ataDisableAutoOffline(device)){ | |
2568 | pout("Smartctl: SMART Disable Automatic Offline Failed.\n\n"); | |
2569 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2570 | } | |
2571 | else | |
2572 | pout("SMART Automatic Offline Testing Disabled.\n"); | |
2573 | } | |
2574 | ||
2575 | if (needupdate && ataReadSmartValues(device, &smartval)){ | |
2576 | pout("Smartctl: SMART Read Values failed.\n\n"); | |
2577 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2578 | smart_val_ok = false; | |
2579 | } | |
2580 | ||
2581 | // all this for a newline! | |
2582 | if ( options.smart_disable || options.smart_enable | |
2583 | || options.smart_auto_save_disable || options.smart_auto_save_enable | |
2584 | || options.smart_auto_offl_disable || options.smart_auto_offl_enable) | |
2585 | pout("\n"); | |
2586 | ||
2587 | // START OF READ-ONLY OPTIONS APART FROM -V and -i | |
2588 | if ( options.smart_check_status || options.smart_general_values | |
2589 | || options.smart_vendor_attrib || options.smart_error_log | |
2590 | || options.smart_selftest_log || options.smart_selective_selftest_log | |
2591 | || options.smart_ext_error_log || options.smart_ext_selftest_log | |
2592 | || options.sct_temp_sts || options.sct_temp_hist ) | |
2593 | pout("=== START OF READ SMART DATA SECTION ===\n"); | |
2594 | ||
2595 | // Check SMART status | |
2596 | if (options.smart_check_status) { | |
2597 | ||
2598 | switch (ataSmartStatus2(device)) { | |
2599 | ||
2600 | case 0: | |
2601 | // The case where the disk health is OK | |
2602 | pout("SMART overall-health self-assessment test result: PASSED\n"); | |
2603 | if (smart_thres_ok && find_failed_attr(&smartval, &smartthres, attribute_defs, 0)) { | |
2604 | if (options.smart_vendor_attrib) | |
2605 | pout("See vendor-specific Attribute list for marginal Attributes.\n\n"); | |
2606 | else { | |
2607 | print_on(); | |
2608 | pout("Please note the following marginal Attributes:\n"); | |
2609 | PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format); | |
2610 | } | |
2611 | returnval|=FAILAGE; | |
2612 | } | |
2613 | else | |
2614 | pout("\n"); | |
2615 | break; | |
2616 | ||
2617 | case 1: | |
2618 | // The case where the disk health is NOT OK | |
2619 | print_on(); | |
2620 | pout("SMART overall-health self-assessment test result: FAILED!\n" | |
2621 | "Drive failure expected in less than 24 hours. SAVE ALL DATA.\n"); | |
2622 | print_off(); | |
2623 | if (smart_thres_ok && find_failed_attr(&smartval, &smartthres, attribute_defs, 1)) { | |
2624 | returnval|=FAILATTR; | |
2625 | if (options.smart_vendor_attrib) | |
2626 | pout("See vendor-specific Attribute list for failed Attributes.\n\n"); | |
2627 | else { | |
2628 | print_on(); | |
2629 | pout("Failed Attributes:\n"); | |
2630 | PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format); | |
2631 | } | |
2632 | } | |
2633 | else | |
2634 | pout("No failed Attributes found.\n\n"); | |
2635 | returnval|=FAILSTATUS; | |
2636 | print_off(); | |
2637 | break; | |
2638 | ||
2639 | case -1: | |
2640 | default: | |
2641 | // Something went wrong with the SMART STATUS command. | |
2642 | // The ATA SMART RETURN STATUS command provides the result in the ATA output | |
2643 | // registers. Buggy ATA/SATA drivers and SAT Layers often do not properly | |
2644 | // return the registers values. | |
2645 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2646 | if (!(smart_val_ok && smart_thres_ok)) { | |
2647 | print_on(); | |
2648 | pout("SMART overall-health self-assessment test result: UNKNOWN!\n" | |
2649 | "SMART Status, Attributes and Thresholds cannot be read.\n\n"); | |
2650 | } | |
2651 | else if (find_failed_attr(&smartval, &smartthres, attribute_defs, 1)) { | |
2652 | print_on(); | |
2653 | pout("SMART overall-health self-assessment test result: FAILED!\n" | |
2654 | "Drive failure expected in less than 24 hours. SAVE ALL DATA.\n"); | |
2655 | print_off(); | |
2656 | returnval|=FAILATTR; | |
2657 | returnval|=FAILSTATUS; | |
2658 | if (options.smart_vendor_attrib) | |
2659 | pout("See vendor-specific Attribute list for failed Attributes.\n\n"); | |
2660 | else { | |
2661 | print_on(); | |
2662 | pout("Failed Attributes:\n"); | |
2663 | PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format); | |
2664 | } | |
2665 | } | |
2666 | else { | |
2667 | pout("SMART overall-health self-assessment test result: PASSED\n"); | |
2668 | pout("Warning: This result is based on an Attribute check.\n"); | |
2669 | if (find_failed_attr(&smartval, &smartthres, attribute_defs, 0)) { | |
2670 | if (options.smart_vendor_attrib) | |
2671 | pout("See vendor-specific Attribute list for marginal Attributes.\n\n"); | |
2672 | else { | |
2673 | print_on(); | |
2674 | pout("Please note the following marginal Attributes:\n"); | |
2675 | PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format); | |
2676 | } | |
2677 | returnval|=FAILAGE; | |
2678 | } | |
2679 | else | |
2680 | pout("\n"); | |
2681 | } | |
2682 | print_off(); | |
2683 | break; | |
2684 | } // end of switch statement | |
2685 | ||
2686 | print_off(); | |
2687 | } // end of checking SMART Status | |
2688 | ||
2689 | // Print general SMART values | |
2690 | if (smart_val_ok && options.smart_general_values) | |
2691 | PrintGeneralSmartValues(&smartval, &drive, fix_firmwarebug); | |
2692 | ||
2693 | // Print vendor-specific attributes | |
2694 | if (smart_val_ok && options.smart_vendor_attrib) { | |
2695 | print_on(); | |
2696 | PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, | |
2697 | (printing_is_switchable ? 2 : 0), options.output_format); | |
2698 | print_off(); | |
2699 | } | |
2700 | ||
2701 | // If GP Log is supported use smart log directory for | |
2702 | // error and selftest log support check. | |
2703 | if ( isGeneralPurposeLoggingCapable(&drive) | |
2704 | && ( options.smart_error_log || options.smart_selftest_log | |
2705 | || options.retry_error_log || options.retry_selftest_log)) | |
2706 | need_smart_logdir = true; | |
2707 | ||
2708 | ata_smart_log_directory smartlogdir_buf, gplogdir_buf; | |
2709 | const ata_smart_log_directory * smartlogdir = 0, * gplogdir = 0; | |
2710 | ||
2711 | // Read SMART Log directory | |
2712 | if (need_smart_logdir) { | |
2713 | if (ataReadLogDirectory(device, &smartlogdir_buf, false)) { | |
2714 | pout("Read SMART Log Directory failed.\n\n"); | |
2715 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2716 | } | |
2717 | else | |
2718 | smartlogdir = &smartlogdir_buf; | |
2719 | } | |
2720 | ||
2721 | // Read GP Log directory | |
2722 | if (need_gp_logdir) { | |
2723 | if (ataReadLogDirectory(device, &gplogdir_buf, true)) { | |
2724 | pout("Read GP Log Directory failed.\n\n"); | |
2725 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2726 | } | |
2727 | else | |
2728 | gplogdir = &gplogdir_buf; | |
2729 | } | |
2730 | ||
2731 | // Print log directories | |
2732 | if ((options.gp_logdir && gplogdir) || (options.smart_logdir && smartlogdir)) | |
2733 | PrintLogDirectories(gplogdir, smartlogdir); | |
2734 | ||
2735 | // Print log pages | |
2736 | for (i = 0; i < options.log_requests.size(); i++) { | |
2737 | const ata_log_request & req = options.log_requests[i]; | |
2738 | ||
2739 | const char * type; | |
2740 | unsigned max_nsectors; | |
2741 | if (req.gpl) { | |
2742 | type = "General Purpose"; | |
2743 | max_nsectors = GetNumLogSectors(gplogdir, req.logaddr, true); | |
2744 | } | |
2745 | else { | |
2746 | type = "SMART"; | |
2747 | max_nsectors = GetNumLogSectors(smartlogdir, req.logaddr, false); | |
2748 | } | |
2749 | ||
2750 | if (!max_nsectors) { | |
2751 | if (!is_permissive()) { | |
2752 | pout("%s Log 0x%02x does not exist (override with '-T permissive' option)\n", type, req.logaddr); | |
2753 | continue; | |
2754 | } | |
2755 | max_nsectors = req.page+1; | |
2756 | } | |
2757 | if (max_nsectors <= req.page) { | |
2758 | pout("%s Log 0x%02x has only %u sectors, output skipped\n", type, req.logaddr, max_nsectors); | |
2759 | continue; | |
2760 | } | |
2761 | ||
2762 | unsigned ns = req.nsectors; | |
2763 | if (ns > max_nsectors - req.page) { | |
2764 | if (req.nsectors != ~0U) // "FIRST-max" | |
2765 | pout("%s Log 0x%02x has only %u sectors, output truncated\n", type, req.logaddr, max_nsectors); | |
2766 | ns = max_nsectors - req.page; | |
2767 | } | |
2768 | ||
2769 | // SMART log don't support sector offset, start with first sector | |
2770 | unsigned offs = (req.gpl ? 0 : req.page); | |
2771 | ||
2772 | raw_buffer log_buf((offs + ns) * 512); | |
2773 | bool ok; | |
2774 | if (req.gpl) | |
2775 | ok = ataReadLogExt(device, req.logaddr, 0x00, req.page, log_buf.data(), ns); | |
2776 | else | |
2777 | ok = ataReadSmartLog(device, req.logaddr, log_buf.data(), offs + ns); | |
2778 | if (!ok) | |
2779 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2780 | else | |
2781 | PrintLogPages(type, log_buf.data() + offs*512, req.logaddr, req.page, ns, max_nsectors); | |
2782 | } | |
2783 | ||
2784 | // Print SMART Extendend Comprehensive Error Log | |
2785 | bool do_smart_error_log = options.smart_error_log; | |
2786 | if (options.smart_ext_error_log) { | |
2787 | bool ok = false; | |
2788 | unsigned nsectors = GetNumLogSectors(gplogdir, 0x03, true); | |
2789 | if (!nsectors) | |
2790 | pout("SMART Extended Comprehensive Error Log (GP Log 0x03) not supported\n"); | |
2791 | else if (nsectors >= 256) | |
2792 | pout("SMART Extended Comprehensive Error Log size %u not supported\n", nsectors); | |
2793 | else { | |
2794 | raw_buffer log_03_buf(nsectors * 512); | |
2795 | ata_smart_exterrlog * log_03 = (ata_smart_exterrlog *)log_03_buf.data(); | |
2796 | if (!ataReadExtErrorLog(device, log_03, nsectors)) | |
2797 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2798 | else { | |
2799 | if (PrintSmartExtErrorLog(log_03, nsectors, options.smart_ext_error_log)) | |
2800 | returnval |= FAILERR; | |
2801 | ok = true; | |
2802 | } | |
2803 | } | |
2804 | ||
2805 | if (!ok) { | |
2806 | if (options.retry_error_log) | |
2807 | do_smart_error_log = true; | |
2808 | else if (!do_smart_error_log) | |
2809 | pout("Try '-l [xerror,]error' to read traditional SMART Error Log\n"); | |
2810 | } | |
2811 | } | |
2812 | ||
2813 | // Print SMART error log | |
2814 | if (do_smart_error_log) { | |
2815 | if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x01, false)) | |
2816 | || (!smartlogdir && isSmartErrorLogCapable(&smartval, &drive) ) | |
2817 | || is_permissive() )) { | |
2818 | pout("SMART Error Log not supported\n"); | |
2819 | } | |
2820 | else { | |
2821 | ata_smart_errorlog smarterror; memset(&smarterror, 0, sizeof(smarterror)); | |
2822 | if (ataReadErrorLog(device, &smarterror, fix_firmwarebug)) { | |
2823 | pout("Smartctl: SMART Error Log Read Failed\n"); | |
2824 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2825 | } | |
2826 | else { | |
2827 | // quiet mode is turned on inside PrintSmartErrorLog() | |
2828 | if (PrintSmartErrorlog(&smarterror, fix_firmwarebug)) | |
2829 | returnval|=FAILERR; | |
2830 | print_off(); | |
2831 | } | |
2832 | } | |
2833 | } | |
2834 | ||
2835 | // Print SMART Extendend Self-test Log | |
2836 | bool do_smart_selftest_log = options.smart_selftest_log; | |
2837 | if (options.smart_ext_selftest_log) { | |
2838 | bool ok = false; | |
2839 | unsigned nsectors = GetNumLogSectors(gplogdir, 0x07, true); | |
2840 | if (!nsectors) | |
2841 | pout("SMART Extended Self-test Log (GP Log 0x07) not supported\n"); | |
2842 | else if (nsectors >= 256) | |
2843 | pout("SMART Extended Self-test Log size %u not supported\n", nsectors); | |
2844 | else { | |
2845 | raw_buffer log_07_buf(nsectors * 512); | |
2846 | ata_smart_extselftestlog * log_07 = (ata_smart_extselftestlog *)log_07_buf.data(); | |
2847 | if (!ataReadExtSelfTestLog(device, log_07, nsectors)) | |
2848 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2849 | else { | |
2850 | if (PrintSmartExtSelfTestLog(log_07, nsectors, options.smart_ext_selftest_log)) | |
2851 | returnval |= FAILLOG; | |
2852 | ok = true; | |
2853 | } | |
2854 | } | |
2855 | ||
2856 | if (!ok) { | |
2857 | if (options.retry_selftest_log) | |
2858 | do_smart_selftest_log = true; | |
2859 | else if (!do_smart_selftest_log) | |
2860 | pout("Try '-l [xselftest,]selftest' to read traditional SMART Self Test Log\n"); | |
2861 | } | |
2862 | } | |
2863 | ||
2864 | // Print SMART self-test log | |
2865 | if (do_smart_selftest_log) { | |
2866 | if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x06, false)) | |
2867 | || (!smartlogdir && isSmartTestLogCapable(&smartval, &drive) ) | |
2868 | || is_permissive() )) { | |
2869 | pout("SMART Self-test Log not supported\n"); | |
2870 | } | |
2871 | else { | |
2872 | ata_smart_selftestlog smartselftest; memset(&smartselftest, 0, sizeof(smartselftest)); | |
2873 | if (ataReadSelfTestLog(device, &smartselftest, fix_firmwarebug)) { | |
2874 | pout("Smartctl: SMART Self Test Log Read Failed\n"); | |
2875 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2876 | } | |
2877 | else { | |
2878 | print_on(); | |
2879 | if (ataPrintSmartSelfTestlog(&smartselftest, !printing_is_switchable, fix_firmwarebug)) | |
2880 | returnval |= FAILLOG; | |
2881 | print_off(); | |
2882 | pout("\n"); | |
2883 | } | |
2884 | } | |
2885 | } | |
2886 | ||
2887 | // Print SMART selective self-test log | |
2888 | if (options.smart_selective_selftest_log) { | |
2889 | ata_selective_self_test_log log; | |
2890 | ||
2891 | if (!isSupportSelectiveSelfTest(&smartval)) | |
2892 | pout("Device does not support Selective Self Tests/Logging\n"); | |
2893 | else if(ataReadSelectiveSelfTestLog(device, &log)) { | |
2894 | pout("Smartctl: SMART Selective Self Test Log Read Failed\n"); | |
2895 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2896 | } | |
2897 | else { | |
2898 | print_on(); | |
2899 | // If any errors were found, they are logged in the SMART Self-test log. | |
2900 | // So there is no need to print the Selective Self Test log in silent | |
2901 | // mode. | |
2902 | if (!printing_is_switchable) | |
2903 | ataPrintSelectiveSelfTestLog(&log, &smartval); | |
2904 | print_off(); | |
2905 | pout("\n"); | |
2906 | } | |
2907 | } | |
2908 | ||
2909 | // SCT commands | |
2910 | bool sct_ok = false; | |
2911 | if (need_sct_support) { | |
2912 | if (!isSCTCapable(&drive)) { | |
2913 | pout("Warning: device does not support SCT Commands\n"); | |
2914 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2915 | } | |
2916 | else | |
2917 | sct_ok = true; | |
2918 | } | |
2919 | ||
2920 | // Print SCT status and temperature history table | |
2921 | if (sct_ok && (options.sct_temp_sts || options.sct_temp_hist || options.sct_temp_int)) { | |
2922 | for (;;) { | |
2923 | if (options.sct_temp_sts || options.sct_temp_hist) { | |
2924 | ata_sct_status_response sts; | |
2925 | ata_sct_temperature_history_table tmh; | |
2926 | if (!options.sct_temp_hist) { | |
2927 | // Read SCT status only | |
2928 | if (ataReadSCTStatus(device, &sts)) { | |
2929 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2930 | break; | |
2931 | } | |
2932 | } | |
2933 | else { | |
2934 | if (!isSCTDataTableCapable(&drive)) { | |
2935 | pout("Warning: device does not support SCT Data Table command\n"); | |
2936 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2937 | break; | |
2938 | } | |
2939 | // Read SCT status and temperature history | |
2940 | if (ataReadSCTTempHist(device, &tmh, &sts)) { | |
2941 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2942 | break; | |
2943 | } | |
2944 | } | |
2945 | if (options.sct_temp_sts) | |
2946 | ataPrintSCTStatus(&sts); | |
2947 | if (options.sct_temp_hist) | |
2948 | ataPrintSCTTempHist(&tmh); | |
2949 | pout("\n"); | |
2950 | } | |
2951 | if (options.sct_temp_int) { | |
2952 | // Set new temperature logging interval | |
2953 | if (!isSCTFeatureControlCapable(&drive)) { | |
2954 | pout("Warning: device does not support SCT Feature Control command\n"); | |
2955 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2956 | break; | |
2957 | } | |
2958 | if (ataSetSCTTempInterval(device, options.sct_temp_int, options.sct_temp_int_pers)) { | |
2959 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2960 | break; | |
2961 | } | |
2962 | pout("Temperature Logging Interval set to %u minute%s (%s)\n", | |
2963 | options.sct_temp_int, (options.sct_temp_int == 1 ? "" : "s"), | |
2964 | (options.sct_temp_int_pers ? "persistent" : "volatile")); | |
2965 | } | |
2966 | break; | |
2967 | } | |
2968 | } | |
2969 | ||
2970 | // SCT Error Recovery Control | |
2971 | if (sct_ok && (options.sct_erc_get || options.sct_erc_set)) { | |
2972 | if (!isSCTErrorRecoveryControlCapable(&drive)) { | |
2973 | pout("Warning: device does not support SCT Error Recovery Control command\n"); | |
2974 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2975 | } | |
2976 | else { | |
2977 | bool sct_erc_get = options.sct_erc_get; | |
2978 | if (options.sct_erc_set) { | |
2979 | // Set SCT Error Recovery Control | |
2980 | if ( ataSetSCTErrorRecoveryControltime(device, 1, options.sct_erc_readtime ) | |
2981 | || ataSetSCTErrorRecoveryControltime(device, 2, options.sct_erc_writetime)) { | |
2982 | pout("Warning: device does not support SCT (Set) Error Recovery Control command\n"); | |
2983 | if (!( (options.sct_erc_readtime == 70 && options.sct_erc_writetime == 70) | |
2984 | || (options.sct_erc_readtime == 0 && options.sct_erc_writetime == 0))) | |
2985 | pout("Retry with: 'scterc,70,70' to enable ERC or 'scterc,0,0' to disable\n"); | |
2986 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
2987 | sct_erc_get = false; | |
2988 | } | |
2989 | else if (!sct_erc_get) | |
2990 | ataPrintSCTErrorRecoveryControl(true, options.sct_erc_readtime, | |
2991 | options.sct_erc_writetime); | |
2992 | } | |
2993 | ||
2994 | if (sct_erc_get) { | |
2995 | // Print SCT Error Recovery Control | |
2996 | unsigned short read_timer, write_timer; | |
2997 | if ( ataGetSCTErrorRecoveryControltime(device, 1, read_timer ) | |
2998 | || ataGetSCTErrorRecoveryControltime(device, 2, write_timer)) { | |
2999 | pout("Warning: device does not support SCT (Get) Error Recovery Control command\n"); | |
3000 | if (options.sct_erc_set) { | |
3001 | pout("The previous SCT (Set) Error Recovery Control command succeeded\n"); | |
3002 | ataPrintSCTErrorRecoveryControl(true, options.sct_erc_readtime, | |
3003 | options.sct_erc_writetime); | |
3004 | } | |
3005 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3006 | } | |
3007 | else | |
3008 | ataPrintSCTErrorRecoveryControl(false, read_timer, write_timer); | |
3009 | } | |
3010 | pout("\n"); | |
3011 | } | |
3012 | } | |
3013 | ||
3014 | // Print Device Statistics | |
3015 | if (options.devstat_all_pages || options.devstat_ssd_page || !options.devstat_pages.empty()) { | |
3016 | unsigned nsectors = GetNumLogSectors(gplogdir, 0x04, true); | |
3017 | if (!nsectors) | |
3018 | pout("Device Statistics (GP Log 0x04) not supported\n"); | |
3019 | else if (!print_device_statistics(device, nsectors, options.devstat_pages, | |
3020 | options.devstat_all_pages, options.devstat_ssd_page)) | |
3021 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3022 | } | |
3023 | ||
3024 | // Print SATA Phy Event Counters | |
3025 | if (options.sataphy) { | |
3026 | unsigned nsectors = GetNumLogSectors(gplogdir, 0x11, true); | |
3027 | if (!nsectors) | |
3028 | pout("SATA Phy Event Counters (GP Log 0x11) not supported\n"); | |
3029 | else if (nsectors != 1) | |
3030 | pout("SATA Phy Event Counters with %u sectors not supported\n", nsectors); | |
3031 | else { | |
3032 | unsigned char log_11[512] = {0, }; | |
3033 | unsigned char features = (options.sataphy_reset ? 0x01 : 0x00); | |
3034 | if (!ataReadLogExt(device, 0x11, features, 0, log_11, 1)) | |
3035 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3036 | else | |
3037 | PrintSataPhyEventCounters(log_11, options.sataphy_reset); | |
3038 | } | |
3039 | } | |
3040 | ||
3041 | // Set to standby (spindown) mode | |
3042 | // (Above commands may spinup drive) | |
3043 | if (options.set_standby_now) { | |
3044 | if (!ata_nodata_command(device, ATA_STANDBY_IMMEDIATE)) { | |
3045 | pout("ATA STANDBY IMMEDIATE command failed: %s\n", device->get_errmsg()); | |
3046 | returnval |= FAILSMART; | |
3047 | } | |
3048 | else | |
3049 | pout("Device placed in STANDBY mode\n"); | |
3050 | } | |
3051 | ||
3052 | // START OF THE TESTING SECTION OF THE CODE. IF NO TESTING, RETURN | |
3053 | if (!smart_val_ok || options.smart_selftest_type == -1) | |
3054 | return returnval; | |
3055 | ||
3056 | pout("=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===\n"); | |
3057 | // if doing a self-test, be sure it's supported by the hardware | |
3058 | switch (options.smart_selftest_type) { | |
3059 | case OFFLINE_FULL_SCAN: | |
3060 | if (!isSupportExecuteOfflineImmediate(&smartval)){ | |
3061 | pout("Warning: device does not support Execute Offline Immediate function.\n\n"); | |
3062 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3063 | } | |
3064 | break; | |
3065 | case ABORT_SELF_TEST: | |
3066 | case SHORT_SELF_TEST: | |
3067 | case EXTEND_SELF_TEST: | |
3068 | case SHORT_CAPTIVE_SELF_TEST: | |
3069 | case EXTEND_CAPTIVE_SELF_TEST: | |
3070 | if (!isSupportSelfTest(&smartval)){ | |
3071 | pout("Warning: device does not support Self-Test functions.\n\n"); | |
3072 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3073 | } | |
3074 | break; | |
3075 | case CONVEYANCE_SELF_TEST: | |
3076 | case CONVEYANCE_CAPTIVE_SELF_TEST: | |
3077 | if (!isSupportConveyanceSelfTest(&smartval)){ | |
3078 | pout("Warning: device does not support Conveyance Self-Test functions.\n\n"); | |
3079 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3080 | } | |
3081 | break; | |
3082 | case SELECTIVE_SELF_TEST: | |
3083 | case SELECTIVE_CAPTIVE_SELF_TEST: | |
3084 | if (!isSupportSelectiveSelfTest(&smartval)){ | |
3085 | pout("Warning: device does not support Selective Self-Test functions.\n\n"); | |
3086 | failuretest(MANDATORY_CMD, returnval|=FAILSMART); | |
3087 | } | |
3088 | break; | |
3089 | default: | |
3090 | break; // Vendor specific type | |
3091 | } | |
3092 | ||
3093 | // Now do the test. Note ataSmartTest prints its own error/success | |
3094 | // messages | |
3095 | if (ataSmartTest(device, options.smart_selftest_type, options.smart_selftest_force, | |
3096 | options.smart_selective_args, &smartval, sizes.sectors )) | |
3097 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3098 | else { | |
3099 | // Tell user how long test will take to complete. This is tricky | |
3100 | // because in the case of an Offline Full Scan, the completion | |
3101 | // timer is volatile, and needs to be read AFTER the command is | |
3102 | // given. If this will interrupt the Offline Full Scan, we don't | |
3103 | // do it, just warn user. | |
3104 | if (options.smart_selftest_type == OFFLINE_FULL_SCAN) { | |
3105 | if (isSupportOfflineAbort(&smartval)) | |
3106 | pout("Note: giving further SMART commands will abort Offline testing\n"); | |
3107 | else if (ataReadSmartValues(device, &smartval)){ | |
3108 | pout("Smartctl: SMART Read Values failed.\n"); | |
3109 | failuretest(OPTIONAL_CMD, returnval|=FAILSMART); | |
3110 | } | |
3111 | } | |
3112 | ||
3113 | // Now say how long the test will take to complete | |
3114 | int timewait = TestTime(&smartval, options.smart_selftest_type); | |
3115 | if (timewait) { | |
3116 | time_t t=time(NULL); | |
3117 | if (options.smart_selftest_type == OFFLINE_FULL_SCAN) { | |
3118 | t+=timewait; | |
3119 | pout("Please wait %d seconds for test to complete.\n", (int)timewait); | |
3120 | } else { | |
3121 | t+=timewait*60; | |
3122 | pout("Please wait %d minutes for test to complete.\n", (int)timewait); | |
3123 | } | |
3124 | pout("Test will complete after %s\n", ctime(&t)); | |
3125 | ||
3126 | if ( options.smart_selftest_type != SHORT_CAPTIVE_SELF_TEST | |
3127 | && options.smart_selftest_type != EXTEND_CAPTIVE_SELF_TEST | |
3128 | && options.smart_selftest_type != CONVEYANCE_CAPTIVE_SELF_TEST | |
3129 | && options.smart_selftest_type != SELECTIVE_CAPTIVE_SELF_TEST ) | |
3130 | pout("Use smartctl -X to abort test.\n"); | |
3131 | } | |
3132 | } | |
3133 | ||
3134 | return returnval; | |
3135 | } |