]>
Commit | Line | Data |
---|---|---|
1 | #! /bin/sh | |
2 | ||
3 | # smartmontools init file for smartd | |
4 | # Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net> | |
5 | # $Id: smartd.initd.in 4120 2015-08-27 16:12:21Z samm2 $ | |
6 | ||
7 | # For RedHat and cousins: | |
8 | # chkconfig: 2345 40 40 | |
9 | # description: Self Monitoring and Reporting Technology (SMART) Daemon | |
10 | # processname: smartd | |
11 | ||
12 | # For SuSE and cousins | |
13 | ### BEGIN INIT INFO | |
14 | # Provides: smartd | |
15 | # Required-Start: $syslog $remote_fs | |
16 | # Should-Start: sendmail | |
17 | # Required-Stop: $syslog $remote_fs | |
18 | # Should-Stop: sendmail | |
19 | # Default-Start: 2 3 5 | |
20 | # Default-Stop: | |
21 | # Short-Description: Monitors disk and tape health via S.M.A.R.T. | |
22 | # Description: Start S.M.A.R.T. disk and tape monitor. | |
23 | ### END INIT INFO | |
24 | ||
25 | # This program is free software; you can redistribute it and/or modify it | |
26 | # under the terms of the GNU General Public License as published by the Free | |
27 | # Software Foundation; either version 2, or (at your option) any later | |
28 | # version. | |
29 | # You should have received a copy of the GNU General Public License (for | |
30 | # example COPYING); if not, write to the Free Software Foundation, Inc., | |
31 | # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
32 | # This code was originally developed as a Senior Thesis by Michael Cornwell | |
33 | # at the Concurrent Systems Laboratory (now part of the Storage Systems | |
34 | # Research Center), Jack Baskin School of Engineering, University of | |
35 | # California, Santa Cruz. http://ssrc.soe.ucsc.edu/. | |
36 | ||
37 | # Uncomment the line below to pass options to smartd on startup. | |
38 | # Note that distribution specific configuration files like | |
39 | # /etc/{default,sysconfig}/smartmontools might override these | |
40 | #smartd_opts="--interval=1800" | |
41 | ||
42 | SMARTD_BIN=/usr/local/sbin/smartd | |
43 | ||
44 | report_unsupported () { | |
45 | echo "Currently the smartmontools package has no init script for" | |
46 | echo "the $1 OS/distribution. If you can provide one or this" | |
47 | echo "one works after removing some ifdefs, please contact" | |
48 | echo "smartmontools-support@lists.sourceforge.net." | |
49 | exit 1 | |
50 | } | |
51 | ||
52 | # Red Hat or Yellow Dog or Mandrake | |
53 | if [ -f /etc/redhat-release -o -f /etc/yellowdog-release -o -f /etc/mandrake-release -o -f /etc/whitebox-release -o -f /etc/trustix-release -o -f /etc/tinysofa-release ] ; then | |
54 | ||
55 | # Source function library | |
56 | . /etc/rc.d/init.d/functions | |
57 | ||
58 | # Source configuration file. This should define the shell variable smartd_opts | |
59 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
60 | ||
61 | RETVAL=0 | |
62 | ||
63 | prog=smartd | |
64 | pidfile=/var/lock/subsys/smartd | |
65 | config=/etc/smartd.conf | |
66 | ||
67 | start() | |
68 | { | |
69 | [ $UID -eq 0 ] || exit 4 | |
70 | [ -x $SMARTD_BIN ] || exit 5 | |
71 | [ -f $config ] || exit 6 | |
72 | echo -n $"Starting $prog: " | |
73 | daemon $SMARTD_BIN $smartd_opts | |
74 | RETVAL=$? | |
75 | echo | |
76 | [ $RETVAL = 0 ] && touch $pidfile | |
77 | return $RETVAL | |
78 | } | |
79 | ||
80 | stop() | |
81 | { | |
82 | [ $UID -eq 0 ] || exit 4 | |
83 | echo -n $"Shutting down $prog: " | |
84 | killproc $SMARTD_BIN | |
85 | RETVAL=$? | |
86 | echo | |
87 | rm -f $pidfile | |
88 | return $RETVAL | |
89 | } | |
90 | ||
91 | reload() | |
92 | { | |
93 | echo -n $"Reloading $prog daemon configuration: " | |
94 | killproc $SMARTD_BIN -HUP | |
95 | RETVAL=$? | |
96 | echo | |
97 | return $RETVAL | |
98 | } | |
99 | ||
100 | report() | |
101 | { | |
102 | echo -n $"Checking SMART devices now: " | |
103 | killproc $SMARTD_BIN -USR1 | |
104 | RETVAL=$? | |
105 | echo | |
106 | return $RETVAL | |
107 | } | |
108 | ||
109 | case "$1" in | |
110 | start) | |
111 | start | |
112 | ;; | |
113 | stop) | |
114 | stop | |
115 | ;; | |
116 | reload) | |
117 | reload | |
118 | ;; | |
119 | report) | |
120 | report | |
121 | ;; | |
122 | restart) | |
123 | stop | |
124 | start | |
125 | ;; | |
126 | condrestart|try-restart) | |
127 | if [ -f $pidfile ]; then | |
128 | stop | |
129 | start | |
130 | fi | |
131 | ;; | |
132 | force-reload) | |
133 | reload || (stop; start) | |
134 | ;; | |
135 | status) | |
136 | status $prog | |
137 | RETVAL=$? | |
138 | ;; | |
139 | *) | |
140 | echo $"Usage: $0 {start|stop|restart|status|condrestart|try-restart|reload|force-reload|report}" | |
141 | RETVAL=2 | |
142 | [ "$1" = 'usage' ] && RETVAL=0 | |
143 | esac | |
144 | exit $RETVAL | |
145 | ||
146 | # Slackware | |
147 | elif [ -f /etc/slackware-version ] ; then | |
148 | ||
149 | # Source configuration file. This should define the shell variable smartd_opts. | |
150 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
151 | # of path for Slackware. | |
152 | ||
153 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
154 | ||
155 | RETVAL=0 | |
156 | case "$1" in | |
157 | start) | |
158 | echo -n "Starting smartd: " | |
159 | $SMARTD_BIN $smartd_opts | |
160 | RETVAL=$? | |
161 | echo | |
162 | ;; | |
163 | stop) | |
164 | echo -n "Shutting down smartd: " | |
165 | killall $SMARTD_BIN | |
166 | RETVAL=$? | |
167 | echo | |
168 | ;; | |
169 | restart) | |
170 | $0 stop | |
171 | sleep 1 | |
172 | $0 start | |
173 | RETVAL=$? | |
174 | ;; | |
175 | try-restart) | |
176 | if pidof $SMARTD_BIN >/dev/null; then | |
177 | $0 restart | |
178 | RETVAL=$? | |
179 | fi | |
180 | ;; | |
181 | force-reload) | |
182 | $0 reload || $0 restart | |
183 | RETVAL=$? | |
184 | ;; | |
185 | reload) | |
186 | echo -n "Reloading smartd configuration: " | |
187 | killall -s HUP $SMARTD_BIN | |
188 | RETVAL=$? | |
189 | echo | |
190 | ;; | |
191 | report) | |
192 | echo -n "Checking SMART devices now: " | |
193 | killall -s USR1 $SMARTD_BIN | |
194 | RETVAL=$? | |
195 | echo | |
196 | ;; | |
197 | status) | |
198 | if pidof $SMARTD_BIN >/dev/null; then | |
199 | echo "$SMARTD_BIN is running." | |
200 | else | |
201 | echo "$SMARTD_BIN is not running." | |
202 | RETVAL=1 | |
203 | fi | |
204 | ;; | |
205 | *) | |
206 | echo "Usage: $0 {start|stop|restart|try-restart|force-reload|reload|report|status}" | |
207 | RETVAL=1 | |
208 | esac | |
209 | exit $RETVAL | |
210 | ||
211 | # SuSE | |
212 | elif [ -f /etc/SuSE-release ] ; then | |
213 | test -x $SMARTD_BIN || exit 5 | |
214 | ||
215 | # Existence of config file is optional | |
216 | SMARTD_CONFIG=/etc/smartd.conf | |
217 | ||
218 | # source configuration file. | |
219 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
220 | smartd_opts= | |
221 | if test -n "$SMARTD_CHECK_INTERVAL" -a "$SMARTD_CHECK_INTERVAL" != 1800 ; then | |
222 | smartd_opts=" -i $SMARTD_CHECK_INTERVAL" | |
223 | fi | |
224 | if test -n "$SMARTD_LOG_FACILITY" -a "$SMARTD_LOG_FACILITY" != "daemon" ; then | |
225 | smartd_opts="$smartd_opts -l $SMARTD_LOG_FACILITY" | |
226 | fi | |
227 | if test -n "$SMARTD_DRIVEDB" ; then | |
228 | smartd_opts="$smartd_opts -B $SMARTD_DRIVEDB" | |
229 | fi | |
230 | if test "$SMARTD_SAVESTATES" = "no" ; then | |
231 | smartd_opts="$smartd_opts -s \"\"" | |
232 | fi | |
233 | if test "$SMARTD_ATTRLOG" = "no" ; then | |
234 | smartd_opts="$smartd_opts -A \"\"" | |
235 | fi | |
236 | if test -n "$SMARTD_EXTRA_OPTS" ; then | |
237 | smartd_opts="$smartd_opts $SMARTD_EXTRA_OPTS" | |
238 | fi | |
239 | ||
240 | # Shell functions sourced from /etc/rc.status: | |
241 | # rc_check check and set local and overall rc status | |
242 | # rc_status check and set local and overall rc status | |
243 | # rc_status -v be verbose in local rc status and clear it afterwards | |
244 | # rc_status -v -r ditto and clear both the local and overall rc status | |
245 | # rc_status -s display "skipped" and exit with status 3 | |
246 | # rc_status -u display "unused" and exit with status 3 | |
247 | # rc_failed set local and overall rc status to failed | |
248 | # rc_failed <num> set local and overall rc status to <num> | |
249 | # rc_reset clear both the local and overall rc status | |
250 | # rc_exit exit appropriate to overall rc status | |
251 | # rc_active checks whether a service is activated by symlinks | |
252 | . /etc/rc.status | |
253 | ||
254 | # Reset status of this service | |
255 | rc_reset | |
256 | ||
257 | # Return values acc. to LSB for all commands but status: | |
258 | # 0 - success | |
259 | # 1 - generic or unspecified error | |
260 | # 2 - invalid or excess argument(s) | |
261 | # 3 - unimplemented feature (e.g. "reload") | |
262 | # 4 - user had insufficient privileges | |
263 | # 5 - program is not installed | |
264 | # 6 - program is not configured | |
265 | # 7 - program is not running | |
266 | # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) | |
267 | # | |
268 | # Note that starting an already running service, stopping | |
269 | # or restarting a not-running service as well as the restart | |
270 | # with force-reload (in case signaling is not supported) are | |
271 | # considered a success. | |
272 | ||
273 | case "$1" in | |
274 | start) | |
275 | echo -n "Starting smartd " | |
276 | ## Start daemon with startproc(8). If this fails | |
277 | ## the return value is set appropriately by startproc. | |
278 | ||
279 | # We don't use startproc - we need to check for return code 17. | |
280 | if ! /sbin/checkproc $SMARTD_BIN ; then | |
281 | eval $SMARTD_BIN$smartd_opts | |
282 | # Remember status and be verbose | |
283 | if test $? -ne 17 ; then | |
284 | rc_status -v | |
285 | else | |
286 | rc_status -u | |
287 | fi | |
288 | else | |
289 | rc_reset | |
290 | rc_status -v | |
291 | fi | |
292 | ;; | |
293 | stop) | |
294 | echo -n "Shutting down smartd " | |
295 | /sbin/killproc -TERM $SMARTD_BIN | |
296 | # Remember status and be verbose | |
297 | rc_status -v | |
298 | ;; | |
299 | try-restart) | |
300 | ## Do a restart only if the service was active before. | |
301 | ## Note: try-restart is now part of LSB (as of 1.9). | |
302 | $0 status | |
303 | if test $? = 0; then | |
304 | $0 restart | |
305 | else | |
306 | rc_reset # Not running is not a failure. | |
307 | fi | |
308 | # Remember status and be quiet | |
309 | rc_status | |
310 | ;; | |
311 | restart) | |
312 | $0 stop | |
313 | $0 start | |
314 | # Remember status and be quiet | |
315 | rc_status | |
316 | ;; | |
317 | force-reload|reload) | |
318 | echo -n "Reload service smartd " | |
319 | /sbin/killproc -HUP $SMARTD_BIN | |
320 | rc_status -v | |
321 | ;; | |
322 | report) | |
323 | ## Checking SMART devices now (smartd specific function) | |
324 | echo -n "Checking SMART devices now " | |
325 | /sbin/killproc -USR1 $SMARTD_BIN | |
326 | rc_status -v | |
327 | ;; | |
328 | status) | |
329 | echo -n "Checking for service smartd " | |
330 | ## Check status with checkproc(8), if process is running | |
331 | ## checkproc will return with exit status 0. | |
332 | ||
333 | # Return value is slightly different for the status command: | |
334 | # 0 - service up and running | |
335 | # 1 - service dead, but /var/run/ pid file exists | |
336 | # 2 - service dead, but /var/lock/ lock file exists | |
337 | # 3 - service not running (unused) | |
338 | # 4 - service status unknown :-( | |
339 | # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) | |
340 | ||
341 | # NOTE: checkproc returns LSB compliant status values. | |
342 | /sbin/checkproc $SMARTD_BIN | |
343 | rc_status -v | |
344 | ;; | |
345 | probe) | |
346 | ## Optional: Probe for the necessity of a reload, print out the | |
347 | ## argument to this init script which is required for a reload. | |
348 | ## Note: probe is not (yet) part of LSB (as of 1.9) | |
349 | ||
350 | test $SMARTD_CONFIG -nt /var/run/smartd.pid && echo reload | |
351 | ;; | |
352 | *) | |
353 | echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|report|probe}" | |
354 | exit 1 | |
355 | esac | |
356 | rc_exit | |
357 | ||
358 | # Debian case | |
359 | elif [ -f /etc/debian_version ] ; then | |
360 | PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin | |
361 | SMARTDPID=/var/run/smartd.pid | |
362 | [ -x $SMARTD_BIN ] || exit 0 | |
363 | RET=0 | |
364 | ||
365 | # source configuration file | |
366 | [ -r /etc/default/rcS ] && . /etc/default/rcS | |
367 | [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools | |
368 | ||
369 | smartd_opts="--pidfile $SMARTDPID $smartd_opts" | |
370 | ||
371 | case "$1" in | |
372 | start) | |
373 | echo -n "Starting S.M.A.R.T. daemon: smartd" | |
374 | if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ | |
375 | --exec $SMARTD_BIN -- $smartd_opts; then | |
376 | echo "." | |
377 | else | |
378 | echo " (failed)" | |
379 | RET=1 | |
380 | fi | |
381 | ;; | |
382 | stop) | |
383 | echo -n "Stopping S.M.A.R.T. daemon: smartd" | |
384 | start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID | |
385 | echo "." | |
386 | ;; | |
387 | restart) | |
388 | $0 stop | |
389 | $0 start | |
390 | ;; | |
391 | force-reload) | |
392 | $0 reload || $0 restart | |
393 | ;; | |
394 | reload) | |
395 | echo -n "Reload S.M.A.R.T. daemon: smartd" | |
396 | if start-stop-daemon --stop --quiet --signal 1 \ | |
397 | --pidfile $SMARTDPID; then | |
398 | echo "." | |
399 | else | |
400 | echo " (failed)" | |
401 | RET=1 | |
402 | fi | |
403 | ;; | |
404 | report) | |
405 | echo -n "Checking SMART devices now" | |
406 | if start-stop-daemon --stop --quiet --signal 10 \ | |
407 | --pidfile $SMARTDPID; then | |
408 | echo "." | |
409 | else | |
410 | echo " (failed)" | |
411 | RET=1 | |
412 | fi | |
413 | ;; | |
414 | status) | |
415 | if pidof $SMARTD_BIN >/dev/null; then | |
416 | echo "$SMARTD_BIN is running." | |
417 | else | |
418 | echo "$SMARTD_BIN is not running." | |
419 | RET=1 | |
420 | fi | |
421 | ;; | |
422 | *) | |
423 | echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}" | |
424 | exit 1 | |
425 | esac | |
426 | exit $RET | |
427 | ||
428 | elif [ -f /etc/gentoo-release ] ; then | |
429 | report_unsupported "Gentoo" | |
430 | ||
431 | elif [ -f /etc/turbolinux-release ] ; then | |
432 | report_unsupported "Turbolinux" | |
433 | ||
434 | elif [ -f /etc/environment.corel ] ; then | |
435 | report_unsupported "Corel" | |
436 | ||
437 | # PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif | |
438 | ||
439 | elif uname -a | grep FreeBSD > /dev/null 2>&1 ; then | |
440 | # following is replaced by port install | |
441 | PREFIX=@@PREFIX@@ | |
442 | ||
443 | # Updated to try both the RCNG version of things from 5.x, or fallback to | |
444 | # oldfashioned rc.conf | |
445 | ||
446 | if [ -r /etc/rc.subr ]; then | |
447 | # This is RC-NG, pick up our values | |
448 | . /etc/rc.subr | |
449 | name="smartd" | |
450 | rcvar="smartd_enable" | |
451 | command="$SMARTD_BIN" | |
452 | load_rc_config $name | |
453 | elif [ -r /etc/defaults/rc.conf ]; then | |
454 | # Not a 5.x system, try the default location for variables | |
455 | . /etc/defaults/rc.conf | |
456 | source_rc_confs | |
457 | elif [ -r /etc/rc.conf ]; then | |
458 | # Worst case, fallback to system config file | |
459 | . /etc/rc.conf | |
460 | fi | |
461 | ||
462 | if [ -r /etc/rc.subr ]; then | |
463 | # Use new functionality from RC-NG | |
464 | run_rc_command "$1" | |
465 | else | |
466 | PID_FILE=/var/run/smartd.pid | |
467 | case "$1" in | |
468 | start) | |
469 | $SMARTD_BIN -p $PID_FILE $smartd_flags | |
470 | echo -n " smartd" | |
471 | ;; | |
472 | stop) | |
473 | kill `cat $PID_FILE` | |
474 | echo -n " smartd" | |
475 | ;; | |
476 | restart) | |
477 | $0 stop | |
478 | sleep 1 | |
479 | $0 start | |
480 | ;; | |
481 | reload) | |
482 | kill -s HUP `cat $PID_FILE` | |
483 | ;; | |
484 | report) | |
485 | kill -s USR1 `cat $PID_FILE` | |
486 | ;; | |
487 | *) | |
488 | echo "Usage: $0 {start|stop|restart|reload|report}" | |
489 | exit 1 | |
490 | esac | |
491 | exit 0 | |
492 | fi | |
493 | ||
494 | elif uname -a | grep SunOS > /dev/null 2>&1 ; then | |
495 | ||
496 | # Source configuration file. This should define the shell variable smartd_opts. | |
497 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
498 | # of path for Solaris | |
499 | ||
500 | [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools | |
501 | ||
502 | PID_FILE=/var/run/smartd.pid | |
503 | ||
504 | case "$1" in | |
505 | start) | |
506 | $SMARTD_BIN -p $PID_FILE $smartd_opts | |
507 | echo -n "smartd " | |
508 | ;; | |
509 | stop) | |
510 | [ -f $PID_FILE ] && kill `cat $PID_FILE` | |
511 | echo -n "smartd " | |
512 | ;; | |
513 | restart) | |
514 | $0 stop | |
515 | sleep 1 | |
516 | $0 start | |
517 | ;; | |
518 | reload) | |
519 | kill -s HUP `cat $PID_FILE` | |
520 | ;; | |
521 | report) | |
522 | kill -s USR1 `cat $PID_FILE` | |
523 | ;; | |
524 | *) | |
525 | echo "Usage: $0 {start|stop|restart|reload|report}" | |
526 | exit 1 | |
527 | esac | |
528 | exit 0 | |
529 | ||
530 | # Cygwin | |
531 | elif uname | grep -i CYGWIN > /dev/null 2>&1 ; then | |
532 | ||
533 | # The following settings may be changed by the configuration file below | |
534 | # Service Name (must be unique) | |
535 | smartd_svcname=smartd | |
536 | # Service display name | |
537 | smartd_svcdisp="CYGWIN smartd" | |
538 | # Service description | |
539 | smartd_svcdesc="\ | |
540 | Controls and monitors storage devices using the Self-Monitoring \ | |
541 | Analysis and Reporting Technology System (S.M.A.R.T.) \ | |
542 | built into ATA and SCSI Hard Drives. \ | |
543 | http://www.smartmontools.org/" | |
544 | ||
545 | # Source configuration file. This should define the shell variable smartd_opts. | |
546 | # Email smartmontools-support@lists.sourceforge.net if there is a better choice | |
547 | # of path for Cygwin | |
548 | ||
549 | [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools | |
550 | ||
551 | PID_FILE=/var/run/smartd.pid | |
552 | RETVAL=0 | |
553 | ||
554 | # Note: "[ -r $PID_FILE ]" is not used here. On Cygwin, this command may | |
555 | # return success even if the file is present but cannot be read by current user. | |
556 | # If smartd is running as service, smartd.pid is owned by local system account | |
557 | # which is different from any user ever executing this script. | |
558 | ||
559 | case "$1" in | |
560 | start) | |
561 | if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then | |
562 | echo -n "Starting service $smartd_svcname: " | |
563 | cygrunsrv -S "$smartd_svcname" | |
564 | else | |
565 | echo -n "Starting smartd as daemon: " | |
566 | $SMARTD_BIN -p $PID_FILE $smartd_opts | |
567 | fi | |
568 | RETVAL=$? | |
569 | ;; | |
570 | stop) | |
571 | echo -n "Shutting down smartd: " | |
572 | pid="`cat $PID_FILE 2>/dev/null`" && kill "$pid" | |
573 | RETVAL=$? | |
574 | ;; | |
575 | reload) | |
576 | echo -n "Reloading smartd configuration: " | |
577 | pid="`cat $PID_FILE 2>/dev/null`" && kill -HUP "$pid" | |
578 | RETVAL=$? | |
579 | ;; | |
580 | report) | |
581 | echo -n "Checking SMART devices now: " | |
582 | pid="`cat $PID_FILE 2>/dev/null`" && kill -USR1 "$pid" | |
583 | RETVAL=$? | |
584 | ;; | |
585 | restart) | |
586 | $0 stop | |
587 | sleep 1 | |
588 | $0 start | |
589 | exit $? | |
590 | ;; | |
591 | install) | |
592 | shift | |
593 | [ $# -eq 0 ] || smartd_opts="$*" | |
594 | dep=; dep2= | |
595 | if cygrunsrv -L 2>/dev/null | grep "^syslogd$" >/dev/null 2>&1; then | |
596 | dep="syslogd" | |
597 | fi | |
598 | if cygrunsrv -L 2>/dev/null | grep "^syslog-ng" >/dev/null 2>&1; then | |
599 | dep2="syslog-ng" | |
600 | fi | |
601 | if [ -z "$dep" ]; then | |
602 | if [ -z "$dep2" ]; then | |
603 | echo "Warning: no syslog service installed, smartd will write to windows event log."; | |
604 | else | |
605 | dep="$dep2" | |
606 | fi | |
607 | else | |
608 | if [ -z "$dep2" ]; then | |
609 | : | |
610 | else | |
611 | dep= | |
612 | echo "Warning: both syslogd and syslog-ng installed, dependency not set." | |
613 | fi | |
614 | fi | |
615 | echo "Installing service ${smartd_svcname}${dep:+ (depending on '$dep')}${smartd_opts:+ with options '$smartd_opts'}:" | |
616 | cygrunsrv -I "$smartd_svcname" -d "$smartd_svcdisp" -f "$smartd_svcdesc" ${dep:+-y} $dep \ | |
617 | -e CYGWIN="$CYGWIN" -p $SMARTD_BIN -a "-n -p ${PID_FILE}${smartd_opts:+ }$smartd_opts" | |
618 | RETVAL=$? | |
619 | ;; | |
620 | remove) | |
621 | echo "Removing service $smartd_svcname:" | |
622 | cygrunsrv -R "$smartd_svcname" | |
623 | RETVAL=$? | |
624 | ;; | |
625 | status) | |
626 | echo -n "Checking smartd status: " | |
627 | if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then | |
628 | if cygrunsrv -Q "$smartd_svcname" 2>/dev/null | grep "State *: Running" >/dev/null 2>&1; then | |
629 | echo "running as service '$smartd_svcname'." | |
630 | elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then | |
631 | echo "installed as service '$smartd_svcname' but running as daemon." | |
632 | else | |
633 | echo "installed as service '$smartd_svcname' but not running." | |
634 | RETVAL=1 | |
635 | fi | |
636 | elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then | |
637 | echo "running as daemon." | |
638 | else | |
639 | echo "not running." | |
640 | RETVAL=1 | |
641 | fi | |
642 | exit $RETVAL | |
643 | ;; | |
644 | *) | |
645 | echo "Usage: $0 {start|stop|restart|reload|report|status}" | |
646 | echo " $0 {install [options]|remove}" | |
647 | exit 1 | |
648 | esac | |
649 | ||
650 | if [ "$RETVAL" -eq 0 ]; then echo "done"; else echo "ERROR"; fi | |
651 | exit $RETVAL | |
652 | ||
653 | # Add other OSes HERE, using elif... | |
654 | else | |
655 | report_unsupported "Unknown" | |
656 | fi | |
657 | ||
658 | # One should NEVER arrive here, except for a badly written case above, | |
659 | # that fails to exit. | |
660 | echo "SOMETHING IS WRONG WITH THE SMARTD STARTUP SCRIPT" | |
661 | echo "PLEASE CONTACT smartmontools-support@lists.sourceforge.net" | |
662 | exit 1 |