1 package PVE
::QemuServer
;
22 use Storable
qw(dclone);
23 use PVE
::Exception
qw(raise raise_param_exc);
25 use PVE
::Tools
qw(run_command lock_file lock_file_full file_read_firstline dir_glob_foreach);
26 use PVE
::JSONSchema
qw(get_standard_option);
27 use PVE
::Cluster
qw(cfs_register_file cfs_read_file cfs_write_file cfs_lock_file);
31 use PVE
::RPCEnvironment
;
32 use Time
::HiRes
qw(gettimeofday);
34 my $cpuinfo = PVE
::ProcFSTools
::read_cpuinfo
();
36 # Note about locking: we use flock on the config file protect
37 # against concurent actions.
38 # Aditionaly, we have a 'lock' setting in the config file. This
39 # can be set to 'migrate', 'backup', 'snapshot' or 'rollback'. Most actions are not
40 # allowed when such lock is set. But you can ignore this kind of
41 # lock with the --skiplock flag.
43 cfs_register_file
('/qemu-server/',
47 PVE
::JSONSchema
::register_standard_option
('skiplock', {
48 description
=> "Ignore locks - only root is allowed to use this option.",
53 PVE
::JSONSchema
::register_standard_option
('pve-qm-stateuri', {
54 description
=> "Some command save/restore state from this location.",
60 PVE
::JSONSchema
::register_standard_option
('pve-snapshot-name', {
61 description
=> "The name of the snapshot.",
62 type
=> 'string', format
=> 'pve-configid',
66 #no warnings 'redefine';
68 unless(defined(&_VZSYSCALLS_H_
)) {
69 eval 'sub _VZSYSCALLS_H_ () {1;}' unless defined(&_VZSYSCALLS_H_
);
70 require 'sys/syscall.ph';
71 if(defined(&__x86_64__
)) {
72 eval 'sub __NR_fairsched_vcpus () {499;}' unless defined(&__NR_fairsched_vcpus
);
73 eval 'sub __NR_fairsched_mknod () {504;}' unless defined(&__NR_fairsched_mknod
);
74 eval 'sub __NR_fairsched_rmnod () {505;}' unless defined(&__NR_fairsched_rmnod
);
75 eval 'sub __NR_fairsched_chwt () {506;}' unless defined(&__NR_fairsched_chwt
);
76 eval 'sub __NR_fairsched_mvpr () {507;}' unless defined(&__NR_fairsched_mvpr
);
77 eval 'sub __NR_fairsched_rate () {508;}' unless defined(&__NR_fairsched_rate
);
78 eval 'sub __NR_setluid () {501;}' unless defined(&__NR_setluid
);
79 eval 'sub __NR_setublimit () {502;}' unless defined(&__NR_setublimit
);
81 elsif(defined( &__i386__
) ) {
82 eval 'sub __NR_fairsched_mknod () {500;}' unless defined(&__NR_fairsched_mknod
);
83 eval 'sub __NR_fairsched_rmnod () {501;}' unless defined(&__NR_fairsched_rmnod
);
84 eval 'sub __NR_fairsched_chwt () {502;}' unless defined(&__NR_fairsched_chwt
);
85 eval 'sub __NR_fairsched_mvpr () {503;}' unless defined(&__NR_fairsched_mvpr
);
86 eval 'sub __NR_fairsched_rate () {504;}' unless defined(&__NR_fairsched_rate
);
87 eval 'sub __NR_fairsched_vcpus () {505;}' unless defined(&__NR_fairsched_vcpus
);
88 eval 'sub __NR_setluid () {511;}' unless defined(&__NR_setluid
);
89 eval 'sub __NR_setublimit () {512;}' unless defined(&__NR_setublimit
);
91 die("no fairsched syscall for this arch");
93 require 'asm/ioctl.ph';
94 eval 'sub KVM_GET_API_VERSION () { &_IO(0xAE, 0x);}' unless defined(&KVM_GET_API_VERSION
);
98 my ($parent, $weight, $desired) = @_;
100 return syscall(&__NR_fairsched_mknod
, int($parent), int($weight), int($desired));
103 sub fairsched_rmnod
{
106 return syscall(&__NR_fairsched_rmnod
, int($id));
110 my ($pid, $newid) = @_;
112 return syscall(&__NR_fairsched_mvpr
, int($pid), int($newid));
115 sub fairsched_vcpus
{
116 my ($id, $vcpus) = @_;
118 return syscall(&__NR_fairsched_vcpus
, int($id), int($vcpus));
122 my ($id, $op, $rate) = @_;
124 return syscall(&__NR_fairsched_rate
, int($id), int($op), int($rate));
127 use constant FAIRSCHED_SET_RATE
=> 0;
128 use constant FAIRSCHED_DROP_RATE
=> 1;
129 use constant FAIRSCHED_GET_RATE
=> 2;
131 sub fairsched_cpulimit
{
132 my ($id, $limit) = @_;
134 my $cpulim1024 = int($limit * 1024 / 100);
135 my $op = $cpulim1024 ? FAIRSCHED_SET_RATE
: FAIRSCHED_DROP_RATE
;
137 return fairsched_rate
($id, $op, $cpulim1024);
140 my $nodename = PVE
::INotify
::nodename
();
142 mkdir "/etc/pve/nodes/$nodename";
143 my $confdir = "/etc/pve/nodes/$nodename/qemu-server";
146 my $var_run_tmpdir = "/var/run/qemu-server";
147 mkdir $var_run_tmpdir;
149 my $lock_dir = "/var/lock/qemu-server";
152 my $pcisysfs = "/sys/bus/pci";
158 description
=> "Enable iothread dataplane.",
164 description
=> "Specifies whether a VM will be started during system bootup.",
170 description
=> "Automatic restart after crash (currently ignored).",
176 description
=> "Allow hotplug for disk and network device",
182 description
=> "Allow reboot. If set to '0' the VM exit on reboot.",
188 description
=> "Lock/unlock the VM.",
189 enum
=> [qw(migrate backup snapshot rollback)],
194 description
=> "Limit of CPU usage in per cent. Note if the computer has 2 CPUs, it has total of 200% CPU time. Value '0' indicates no CPU limit.\n\nNOTE: This option is currently ignored.",
201 description
=> "CPU weight for a VM. Argument is used in the kernel fair scheduler. The larger the number is, the more CPU time this VM gets. Number is relative to weights of all the other running VMs.\n\nNOTE: You can disable fair-scheduler configuration by setting this to 0.",
209 description
=> "Amount of RAM for the VM in MB. This is the maximum available memory when you use the balloon device.",
216 description
=> "Amount of target RAM for the VM in MB. Using zero disables the ballon driver.",
222 description
=> "Amount of memory shares for auto-ballooning. The larger the number is, the more memory this VM gets. Number is relative to weights of all other running VMs. Using zero disables auto-ballooning",
230 description
=> "Keybord layout for vnc server. Default is read from the datacenter configuration file.",
231 enum
=> PVE
::Tools
::kvmkeymaplist
(),
236 type
=> 'string', format
=> 'dns-name',
237 description
=> "Set a name for the VM. Only used on the configuration web interface.",
242 description
=> "scsi controller model",
243 enum
=> [qw(lsi lsi53c810 virtio-scsi-pci megasas pvscsi)],
249 description
=> "Description for the VM. Only used on the configuration web interface. This is saved as comment inside the configuration file.",
254 enum
=> [qw(other wxp w2k w2k3 w2k8 wvista win7 win8 l24 l26 solaris)],
255 description
=> <<EODESC,
256 Used to enable special optimization/features for specific
259 other => unspecified OS
260 wxp => Microsoft Windows XP
261 w2k => Microsoft Windows 2000
262 w2k3 => Microsoft Windows 2003
263 w2k8 => Microsoft Windows 2008
264 wvista => Microsoft Windows Vista
265 win7 => Microsoft Windows 7
266 win8 => Microsoft Windows 8/2012
267 l24 => Linux 2.4 Kernel
268 l26 => Linux 2.6/3.X Kernel
269 solaris => solaris/opensolaris/openindiania kernel
271 other|l24|l26|solaris ... no special behaviour
272 wxp|w2k|w2k3|w2k8|wvista|win7|win8 ... use --localtime switch
278 description
=> "Boot on floppy (a), hard disk (c), CD-ROM (d), or network (n).",
279 pattern
=> '[acdn]{1,4}',
284 type
=> 'string', format
=> 'pve-qm-bootdisk',
285 description
=> "Enable booting from specified disk.",
286 pattern
=> '(ide|sata|scsi|virtio)\d+',
291 description
=> "The number of CPUs. Please use option -sockets instead.",
298 description
=> "The number of CPU sockets.",
305 description
=> "The number of cores per socket.",
312 description
=> "Enable/disable Numa.",
318 description
=> "Maximum cpus for hotplug.",
325 description
=> "Enable/disable ACPI.",
331 description
=> "Enable/disable Qemu GuestAgent.",
337 description
=> "Enable/disable KVM hardware virtualization.",
343 description
=> "Enable/disable time drift fix.",
349 description
=> "Set the real time clock to local time. This is enabled by default if ostype indicates a Microsoft OS.",
354 description
=> "Freeze CPU at startup (use 'c' monitor command to start execution).",
359 description
=> "Select VGA type. If you want to use high resolution modes (>= 1280x1024x16) then you should use option 'std' or 'vmware'. Default is 'std' for win8/win7/w2k8, and 'cirrur' for other OS types. Option 'qxl' enables the SPICE display sever. You can also run without any graphic card using a serial devive as terminal.",
360 enum
=> [qw(std cirrus vmware qxl serial0 serial1 serial2 serial3 qxl2 qxl3 qxl4)],
364 type
=> 'string', format
=> 'pve-qm-watchdog',
365 typetext
=> '[[model=]i6300esb|ib700] [,[action=]reset|shutdown|poweroff|pause|debug|none]',
366 description
=> "Create a virtual hardware watchdog device. Once enabled (by a guest action), the watchdog must be periodically polled by an agent inside the guest or else the guest will be restarted (or execute the action specified)",
371 typetext
=> "(now | YYYY-MM-DD | YYYY-MM-DDTHH:MM:SS)",
372 description
=> "Set the initial date of the real time clock. Valid format for date are: 'now' or '2006-06-17T16:01:21' or '2006-06-17'.",
373 pattern
=> '(now|\d{4}-\d{1,2}-\d{1,2}(T\d{1,2}:\d{1,2}:\d{1,2})?)',
378 type
=> 'string', format
=> 'pve-qm-startup',
379 typetext
=> '[[order=]\d+] [,up=\d+] [,down=\d+] ',
380 description
=> "Startup and shutdown behavior. Order is a non-negative number defining the general startup order. Shutdown in done with reverse ordering. Additionally you can set the 'up' or 'down' delay in seconds, which specifies a delay to wait before the next VM is started or stopped.",
385 description
=> "Enable/disable Template.",
391 description
=> <<EODESCR,
392 Note: this option is for experts only. It allows you to pass arbitrary arguments to kvm, for example:
394 args: -no-reboot -no-hpet
401 description
=> "Enable/disable the usb tablet device. This device is usually needed to allow absolute mouse positioning with VNC. Else the mouse runs out of sync with normal VNC clients. If you're running lots of console-only guests on one host, you may consider disabling this to save some context switches. This is turned of by default if you use spice (vga=qxl).",
406 description
=> "Set maximum speed (in MB/s) for migrations. Value 0 is no limit.",
410 migrate_downtime
=> {
413 description
=> "Set maximum tolerated downtime (in seconds) for migrations.",
419 type
=> 'string', format
=> 'pve-qm-drive',
420 typetext
=> 'volume',
421 description
=> "This is an alias for option -ide2",
425 description
=> "Emulated CPU type.",
427 enum
=> [ qw(486 athlon pentium pentium2 pentium3 coreduo core2duo kvm32 kvm64 qemu32 qemu64 phenom Conroe Penryn Nehalem Westmere SandyBridge Haswell Broadwell Opteron_G1 Opteron_G2 Opteron_G3 Opteron_G4 Opteron_G5 host) ],
430 parent
=> get_standard_option
('pve-snapshot-name', {
432 description
=> "Parent snapshot name. This is used internally, and should not be modified.",
436 description
=> "Timestamp for snapshots.",
442 type
=> 'string', format
=> 'pve-volume-id',
443 description
=> "Reference to a volume which stores the VM state. This is used internally for snapshots.",
446 description
=> "Specific the Qemu machine type.",
448 pattern
=> '(pc|pc(-i440fx)?-\d+\.\d+|q35|pc-q35-\d+\.\d+)',
453 description
=> "Specify SMBIOS type 1 fields.",
454 type
=> 'string', format
=> 'pve-qm-smbios1',
455 typetext
=> "[manufacturer=str][,product=str][,version=str][,serial=str] [,uuid=uuid][,sku=str][,family=str]",
461 # what about other qemu settings ?
463 #machine => 'string',
476 ##soundhw => 'string',
478 while (my ($k, $v) = each %$confdesc) {
479 PVE
::JSONSchema
::register_standard_option
("pve-qm-$k", $v);
482 my $MAX_IDE_DISKS = 4;
483 my $MAX_SCSI_DISKS = 14;
484 my $MAX_VIRTIO_DISKS = 16;
485 my $MAX_SATA_DISKS = 6;
486 my $MAX_USB_DEVICES = 5;
488 my $MAX_UNUSED_DISKS = 8;
489 my $MAX_HOSTPCI_DEVICES = 4;
490 my $MAX_SERIAL_PORTS = 4;
491 my $MAX_PARALLEL_PORTS = 3;
496 type
=> 'string', format
=> 'pve-qm-numanode',
497 typetext
=> "cpus=<id[-id],memory=<mb>[[,hostnodes=<id[-id]>][,policy=<preferred|bind|interleave>]]",
498 description
=> "numa topology",
500 PVE
::JSONSchema
::register_standard_option
("pve-qm-numanode", $numadesc);
502 for (my $i = 0; $i < $MAX_NUMA; $i++) {
503 $confdesc->{"numa$i"} = $numadesc;
506 my $nic_model_list = ['rtl8139', 'ne2k_pci', 'e1000', 'pcnet', 'virtio',
507 'ne2k_isa', 'i82551', 'i82557b', 'i82559er', 'vmxnet3'];
508 my $nic_model_list_txt = join(' ', sort @$nic_model_list);
512 type
=> 'string', format
=> 'pve-qm-net',
513 typetext
=> "MODEL=XX:XX:XX:XX:XX:XX [,bridge=<dev>][,queues=<nbqueues>][,rate=<mbps>][,tag=<vlanid>][,firewall=0|1]",
514 description
=> <<EODESCR,
515 Specify network devices.
517 MODEL is one of: $nic_model_list_txt
519 XX:XX:XX:XX:XX:XX should be an unique MAC address. This is
520 automatically generated if not specified.
522 The bridge parameter can be used to automatically add the interface to a bridge device. The Proxmox VE standard bridge is called 'vmbr0'.
524 Option 'rate' is used to limit traffic bandwidth from and to this interface. It is specified as floating point number, unit is 'Megabytes per second'.
526 If you specify no bridge, we create a kvm 'user' (NATed) network device, which provides DHCP and DNS services. The following addresses are used:
532 The DHCP server assign addresses to the guest starting from 10.0.2.15.
536 PVE
::JSONSchema
::register_standard_option
("pve-qm-net", $netdesc);
538 for (my $i = 0; $i < $MAX_NETS; $i++) {
539 $confdesc->{"net$i"} = $netdesc;
546 type
=> 'string', format
=> 'pve-qm-drive',
547 typetext
=> '[volume=]volume,] [,media=cdrom|disk] [,cyls=c,heads=h,secs=s[,trans=t]] [,snapshot=on|off] [,cache=none|writethrough|writeback|unsafe|directsync] [,format=f] [,backup=yes|no] [,rerror=ignore|report|stop] [,werror=enospc|ignore|report|stop] [,aio=native|threads] [,discard=ignore|on]',
548 description
=> "Use volume as IDE hard disk or CD-ROM (n is 0 to " .($MAX_IDE_DISKS -1) . ").",
550 PVE
::JSONSchema
::register_standard_option
("pve-qm-ide", $idedesc);
554 type
=> 'string', format
=> 'pve-qm-drive',
555 typetext
=> '[volume=]volume,] [,media=cdrom|disk] [,cyls=c,heads=h,secs=s[,trans=t]] [,snapshot=on|off] [,cache=none|writethrough|writeback|unsafe|directsync] [,format=f] [,backup=yes|no] [,rerror=ignore|report|stop] [,werror=enospc|ignore|report|stop] [,aio=native|threads] [,discard=ignore|on]',
556 description
=> "Use volume as SCSI hard disk or CD-ROM (n is 0 to " . ($MAX_SCSI_DISKS - 1) . ").",
558 PVE
::JSONSchema
::register_standard_option
("pve-qm-scsi", $scsidesc);
562 type
=> 'string', format
=> 'pve-qm-drive',
563 typetext
=> '[volume=]volume,] [,media=cdrom|disk] [,cyls=c,heads=h,secs=s[,trans=t]] [,snapshot=on|off] [,cache=none|writethrough|writeback|unsafe|directsync] [,format=f] [,backup=yes|no] [,rerror=ignore|report|stop] [,werror=enospc|ignore|report|stop] [,aio=native|threads] [,discard=ignore|on]',
564 description
=> "Use volume as SATA hard disk or CD-ROM (n is 0 to " . ($MAX_SATA_DISKS - 1). ").",
566 PVE
::JSONSchema
::register_standard_option
("pve-qm-sata", $satadesc);
570 type
=> 'string', format
=> 'pve-qm-drive',
571 typetext
=> '[volume=]volume,] [,media=cdrom|disk] [,cyls=c,heads=h,secs=s[,trans=t]] [,snapshot=on|off] [,cache=none|writethrough|writeback|unsafe|directsync] [,format=f] [,backup=yes|no] [,rerror=ignore|report|stop] [,werror=enospc|ignore|report|stop] [,aio=native|threads] [,discard=ignore|on]',
572 description
=> "Use volume as VIRTIO hard disk (n is 0 to " . ($MAX_VIRTIO_DISKS - 1) . ").",
574 PVE
::JSONSchema
::register_standard_option
("pve-qm-virtio", $virtiodesc);
578 type
=> 'string', format
=> 'pve-qm-usb-device',
579 typetext
=> 'host=HOSTUSBDEVICE|spice',
580 description
=> <<EODESCR,
581 Configure an USB device (n is 0 to 4). This can be used to
582 pass-through usb devices to the guest. HOSTUSBDEVICE syntax is:
584 'bus-port(.port)*' (decimal numbers) or
585 'vendor_id:product_id' (hexadeciaml numbers)
587 You can use the 'lsusb -t' command to list existing usb devices.
589 Note: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
591 The value 'spice' can be used to add a usb redirection devices for spice.
595 PVE
::JSONSchema
::register_standard_option
("pve-qm-usb", $usbdesc);
599 type
=> 'string', format
=> 'pve-qm-hostpci',
600 typetext
=> "[host=]HOSTPCIDEVICE [,driver=kvm|vfio] [,rombar=on|off] [,pcie=0|1] [,x-vga=on|off]",
601 description
=> <<EODESCR,
602 Map host pci devices. HOSTPCIDEVICE syntax is:
604 'bus:dev.func' (hexadecimal numbers)
606 You can us the 'lspci' command to list existing pci devices.
608 The 'rombar' option determines whether or not the device's ROM will be visible in the guest's memory map (default is 'on').
610 Note: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
612 Experimental: user reported problems with this option.
615 PVE
::JSONSchema
::register_standard_option
("pve-qm-hostpci", $hostpcidesc);
620 pattern
=> '(/dev/.+|socket)',
621 description
=> <<EODESCR,
622 Create a serial device inside the VM (n is 0 to 3), and pass through a host serial device (i.e. /dev/ttyS0), or create a unix socket on the host side (use 'qm terminal' to open a terminal connection).
624 Note: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
626 Experimental: user reported problems with this option.
633 pattern
=> '/dev/parport\d+|/dev/usb/lp\d+',
634 description
=> <<EODESCR,
635 Map host parallel devices (n is 0 to 2).
637 Note: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
639 Experimental: user reported problems with this option.
643 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
644 $confdesc->{"parallel$i"} = $paralleldesc;
647 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
648 $confdesc->{"serial$i"} = $serialdesc;
651 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
652 $confdesc->{"hostpci$i"} = $hostpcidesc;
655 for (my $i = 0; $i < $MAX_IDE_DISKS; $i++) {
656 $drivename_hash->{"ide$i"} = 1;
657 $confdesc->{"ide$i"} = $idedesc;
660 for (my $i = 0; $i < $MAX_SATA_DISKS; $i++) {
661 $drivename_hash->{"sata$i"} = 1;
662 $confdesc->{"sata$i"} = $satadesc;
665 for (my $i = 0; $i < $MAX_SCSI_DISKS; $i++) {
666 $drivename_hash->{"scsi$i"} = 1;
667 $confdesc->{"scsi$i"} = $scsidesc ;
670 for (my $i = 0; $i < $MAX_VIRTIO_DISKS; $i++) {
671 $drivename_hash->{"virtio$i"} = 1;
672 $confdesc->{"virtio$i"} = $virtiodesc;
675 for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
676 $confdesc->{"usb$i"} = $usbdesc;
681 type
=> 'string', format
=> 'pve-volume-id',
682 description
=> "Reference to unused volumes.",
685 for (my $i = 0; $i < $MAX_UNUSED_DISKS; $i++) {
686 $confdesc->{"unused$i"} = $unuseddesc;
689 my $kvm_api_version = 0;
693 return $kvm_api_version if $kvm_api_version;
695 my $fh = IO
::File-
>new("</dev/kvm") ||
698 if (my $v = $fh->ioctl(KVM_GET_API_VERSION
(), 0)) {
699 $kvm_api_version = $v;
704 return $kvm_api_version;
707 my $kvm_user_version;
709 sub kvm_user_version
{
711 return $kvm_user_version if $kvm_user_version;
713 $kvm_user_version = 'unknown';
715 my $tmp = `kvm -help 2>/dev/null`;
717 if ($tmp =~ m/^QEMU( PC)? emulator version (\d+\.\d+(\.\d+)?)[,\s]/) {
718 $kvm_user_version = $2;
721 return $kvm_user_version;
725 my $kernel_has_vhost_net = -c
'/dev/vhost-net';
728 # order is important - used to autoselect boot disk
729 return ((map { "ide$_" } (0 .. ($MAX_IDE_DISKS - 1))),
730 (map { "scsi$_" } (0 .. ($MAX_SCSI_DISKS - 1))),
731 (map { "virtio$_" } (0 .. ($MAX_VIRTIO_DISKS - 1))),
732 (map { "sata$_" } (0 .. ($MAX_SATA_DISKS - 1))));
735 sub valid_drivename
{
738 return defined($drivename_hash->{$dev});
743 return defined($confdesc->{$key});
747 return $nic_model_list;
750 sub os_list_description
{
755 w2k
=> 'Windows 2000',
756 w2k3
=>, 'Windows 2003',
757 w2k8
=> 'Windows 2008',
758 wvista
=> 'Windows Vista',
760 win8
=> 'Windows 8/2012',
770 return $cdrom_path if $cdrom_path;
772 return $cdrom_path = "/dev/cdrom" if -l
"/dev/cdrom";
773 return $cdrom_path = "/dev/cdrom1" if -l
"/dev/cdrom1";
774 return $cdrom_path = "/dev/cdrom2" if -l
"/dev/cdrom2";
778 my ($storecfg, $vmid, $cdrom) = @_;
780 if ($cdrom eq 'cdrom') {
781 return get_cdrom_path
();
782 } elsif ($cdrom eq 'none') {
784 } elsif ($cdrom =~ m
|^/|) {
787 return PVE
::Storage
::path
($storecfg, $cdrom);
791 # try to convert old style file names to volume IDs
792 sub filename_to_volume_id
{
793 my ($vmid, $file, $media) = @_;
795 if (!($file eq 'none' || $file eq 'cdrom' ||
796 $file =~ m
|^/dev/.+| || $file =~ m/^([^:]+):(.+)$/)) {
798 return undef if $file =~ m
|/|;
800 if ($media && $media eq 'cdrom') {
801 $file = "local:iso/$file";
803 $file = "local:$vmid/$file";
810 sub verify_media_type
{
811 my ($opt, $vtype, $media) = @_;
816 if ($media eq 'disk') {
818 } elsif ($media eq 'cdrom') {
821 die "internal error";
824 return if ($vtype eq $etype);
826 raise_param_exc
({ $opt => "unexpected media type ($vtype != $etype)" });
829 sub cleanup_drive_path
{
830 my ($opt, $storecfg, $drive) = @_;
832 # try to convert filesystem paths to volume IDs
834 if (($drive->{file
} !~ m/^(cdrom|none)$/) &&
835 ($drive->{file
} !~ m
|^/dev/.+|) &&
836 ($drive->{file
} !~ m/^([^:]+):(.+)$/) &&
837 ($drive->{file
} !~ m/^\d+$/)) {
838 my ($vtype, $volid) = PVE
::Storage
::path_to_volume_id
($storecfg, $drive->{file
});
839 raise_param_exc
({ $opt => "unable to associate path '$drive->{file}' to any storage"}) if !$vtype;
840 $drive->{media
} = 'cdrom' if !$drive->{media
} && $vtype eq 'iso';
841 verify_media_type
($opt, $vtype, $drive->{media
});
842 $drive->{file
} = $volid;
845 $drive->{media
} = 'cdrom' if !$drive->{media
} && $drive->{file
} =~ m/^(cdrom|none)$/;
848 sub create_conf_nolock
{
849 my ($vmid, $settings) = @_;
851 my $filename = config_file
($vmid);
853 die "configuration file '$filename' already exists\n" if -f
$filename;
855 my $defaults = load_defaults
();
857 $settings->{name
} = "vm$vmid" if !$settings->{name
};
858 $settings->{memory
} = $defaults->{memory
} if !$settings->{memory
};
861 foreach my $opt (keys %$settings) {
862 next if !$confdesc->{$opt};
864 my $value = $settings->{$opt};
867 $data .= "$opt: $value\n";
870 PVE
::Tools
::file_set_contents
($filename, $data);
873 my $parse_size = sub {
876 return undef if $value !~ m/^(\d+(\.\d+)?)([KMG])?$/;
877 my ($size, $unit) = ($1, $3);
880 $size = $size * 1024;
881 } elsif ($unit eq 'M') {
882 $size = $size * 1024 * 1024;
883 } elsif ($unit eq 'G') {
884 $size = $size * 1024 * 1024 * 1024;
890 my $format_size = sub {
895 my $kb = int($size/1024);
896 return $size if $kb*1024 != $size;
898 my $mb = int($kb/1024);
899 return "${kb}K" if $mb*1024 != $kb;
901 my $gb = int($mb/1024);
902 return "${mb}M" if $gb*1024 != $mb;
907 # ideX = [volume=]volume-id[,media=d][,cyls=c,heads=h,secs=s[,trans=t]]
908 # [,snapshot=on|off][,cache=on|off][,format=f][,backup=yes|no]
909 # [,rerror=ignore|report|stop][,werror=enospc|ignore|report|stop]
910 # [,aio=native|threads][,discard=ignore|on]
913 my ($key, $data) = @_;
917 # $key may be undefined - used to verify JSON parameters
918 if (!defined($key)) {
919 $res->{interface
} = 'unknown'; # should not harm when used to verify parameters
921 } elsif ($key =~ m/^([^\d]+)(\d+)$/) {
922 $res->{interface
} = $1;
928 foreach my $p (split (/,/, $data)) {
929 next if $p =~ m/^\s*$/;
931 if ($p =~ m/^(file|volume|cyls|heads|secs|trans|media|snapshot|cache|format|rerror|werror|backup|aio|bps|mbps|mbps_max|bps_rd|mbps_rd|mbps_rd_max|bps_wr|mbps_wr|mbps_wr_max|iops|iops_max|iops_rd|iops_rd_max|iops_wr|iops_wr_max|size|discard)=(.+)$/) {
932 my ($k, $v) = ($1, $2);
934 $k = 'file' if $k eq 'volume';
936 return undef if defined $res->{$k};
938 if ($k eq 'bps' || $k eq 'bps_rd' || $k eq 'bps_wr') {
939 return undef if !$v || $v !~ m/^\d+/;
941 $v = sprintf("%.3f", $v / (1024*1024));
945 if (!$res->{file
} && $p !~ m/=/) {
953 return undef if !$res->{file
};
955 if($res->{file
} =~ m/\.(raw|cow|qcow|qcow2|vmdk|cloop)$/){
959 return undef if $res->{cache
} &&
960 $res->{cache
} !~ m/^(off|none|writethrough|writeback|unsafe|directsync)$/;
961 return undef if $res->{snapshot
} && $res->{snapshot
} !~ m/^(on|off)$/;
962 return undef if $res->{cyls
} && $res->{cyls
} !~ m/^\d+$/;
963 return undef if $res->{heads
} && $res->{heads
} !~ m/^\d+$/;
964 return undef if $res->{secs
} && $res->{secs
} !~ m/^\d+$/;
965 return undef if $res->{media
} && $res->{media
} !~ m/^(disk|cdrom)$/;
966 return undef if $res->{trans
} && $res->{trans
} !~ m/^(none|lba|auto)$/;
967 return undef if $res->{format
} && $res->{format
} !~ m/^(raw|cow|qcow|qcow2|vmdk|cloop)$/;
968 return undef if $res->{rerror
} && $res->{rerror
} !~ m/^(ignore|report|stop)$/;
969 return undef if $res->{werror
} && $res->{werror
} !~ m/^(enospc|ignore|report|stop)$/;
970 return undef if $res->{backup
} && $res->{backup
} !~ m/^(yes|no)$/;
971 return undef if $res->{aio
} && $res->{aio
} !~ m/^(native|threads)$/;
972 return undef if $res->{discard
} && $res->{discard
} !~ m/^(ignore|on)$/;
974 return undef if $res->{mbps_rd
} && $res->{mbps
};
975 return undef if $res->{mbps_wr
} && $res->{mbps
};
977 return undef if $res->{mbps
} && $res->{mbps
} !~ m/^\d+(\.\d+)?$/;
978 return undef if $res->{mbps_max
} && $res->{mbps_max
} !~ m/^\d+(\.\d+)?$/;
979 return undef if $res->{mbps_rd
} && $res->{mbps_rd
} !~ m/^\d+(\.\d+)?$/;
980 return undef if $res->{mbps_rd_max
} && $res->{mbps_rd_max
} !~ m/^\d+(\.\d+)?$/;
981 return undef if $res->{mbps_wr
} && $res->{mbps_wr
} !~ m/^\d+(\.\d+)?$/;
982 return undef if $res->{mbps_wr_max
} && $res->{mbps_wr_max
} !~ m/^\d+(\.\d+)?$/;
984 return undef if $res->{iops_rd
} && $res->{iops
};
985 return undef if $res->{iops_wr
} && $res->{iops
};
988 return undef if $res->{iops
} && $res->{iops
} !~ m/^\d+$/;
989 return undef if $res->{iops_max
} && $res->{iops_max
} !~ m/^\d+$/;
990 return undef if $res->{iops_rd
} && $res->{iops_rd
} !~ m/^\d+$/;
991 return undef if $res->{iops_rd_max
} && $res->{iops_rd_max
} !~ m/^\d+$/;
992 return undef if $res->{iops_wr
} && $res->{iops_wr
} !~ m/^\d+$/;
993 return undef if $res->{iops_wr_max
} && $res->{iops_wr_max
} !~ m/^\d+$/;
997 return undef if !defined($res->{size
} = &$parse_size($res->{size
}));
1000 if ($res->{media
} && ($res->{media
} eq 'cdrom')) {
1001 return undef if $res->{snapshot
} || $res->{trans
} || $res->{format
};
1002 return undef if $res->{heads
} || $res->{secs
} || $res->{cyls
};
1003 return undef if $res->{interface
} eq 'virtio';
1006 # rerror does not work with scsi drives
1007 if ($res->{rerror
}) {
1008 return undef if $res->{interface
} eq 'scsi';
1014 my @qemu_drive_options = qw(heads secs cyls trans media format cache snapshot rerror werror aio discard iops iops_rd iops_wr iops_max iops_rd_max iops_wr_max);
1017 my ($vmid, $drive) = @_;
1020 foreach my $o (@qemu_drive_options, 'mbps', 'mbps_rd', 'mbps_wr', 'mbps_max', 'mbps_rd_max', 'mbps_wr_max', 'backup') {
1021 $opts .= ",$o=$drive->{$o}" if $drive->{$o};
1024 if ($drive->{size
}) {
1025 $opts .= ",size=" . &$format_size($drive->{size
});
1028 return "$drive->{file}$opts";
1032 my($fh, $noerr) = @_;
1035 my $SG_GET_VERSION_NUM = 0x2282;
1037 my $versionbuf = "\x00" x
8;
1038 my $ret = ioctl($fh, $SG_GET_VERSION_NUM, $versionbuf);
1040 die "scsi ioctl SG_GET_VERSION_NUM failoed - $!\n" if !$noerr;
1043 my $version = unpack("I", $versionbuf);
1044 if ($version < 30000) {
1045 die "scsi generic interface too old\n" if !$noerr;
1049 my $buf = "\x00" x
36;
1050 my $sensebuf = "\x00" x
8;
1051 my $cmd = pack("C x3 C x1", 0x12, 36);
1053 # see /usr/include/scsi/sg.h
1054 my $sg_io_hdr_t = "i i C C s I P P P I I i P C C C C S S i I I";
1056 my $packet = pack($sg_io_hdr_t, ord('S'), -3, length($cmd),
1057 length($sensebuf), 0, length($buf), $buf,
1058 $cmd, $sensebuf, 6000);
1060 $ret = ioctl($fh, $SG_IO, $packet);
1062 die "scsi ioctl SG_IO failed - $!\n" if !$noerr;
1066 my @res = unpack($sg_io_hdr_t, $packet);
1067 if ($res[17] || $res[18]) {
1068 die "scsi ioctl SG_IO status error - $!\n" if !$noerr;
1073 (my $byte0, my $byte1, $res->{vendor
},
1074 $res->{product
}, $res->{revision
}) = unpack("C C x6 A8 A16 A4", $buf);
1076 $res->{removable
} = $byte1 & 128 ?
1 : 0;
1077 $res->{type
} = $byte0 & 31;
1085 my $fh = IO
::File-
>new("+<$path") || return undef;
1086 my $res = scsi_inquiry
($fh, 1);
1092 sub machine_type_is_q35
{
1095 return $conf->{machine
} && ($conf->{machine
} =~ m/q35/) ?
1 : 0;
1098 sub print_tabletdevice_full
{
1101 my $q35 = machine_type_is_q35
($conf);
1103 # we use uhci for old VMs because tablet driver was buggy in older qemu
1104 my $usbbus = $q35 ?
"ehci" : "uhci";
1106 return "usb-tablet,id=tablet,bus=$usbbus.0,port=1";
1109 sub print_drivedevice_full
{
1110 my ($storecfg, $conf, $vmid, $drive, $bridges) = @_;
1115 if ($drive->{interface
} eq 'virtio') {
1116 my $pciaddr = print_pci_addr
("$drive->{interface}$drive->{index}", $bridges);
1117 $device = "virtio-blk-pci,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}$pciaddr";
1118 $device .= ",iothread=iothread0" if $conf->{iothread
};
1119 } elsif ($drive->{interface
} eq 'scsi') {
1120 $maxdev = ($conf->{scsihw
} && ($conf->{scsihw
} !~ m/^lsi/)) ?
256 : 7;
1121 my $controller = int($drive->{index} / $maxdev);
1122 my $unit = $drive->{index} % $maxdev;
1123 my $devicetype = 'hd';
1125 if (drive_is_cdrom
($drive)) {
1128 if ($drive->{file
} =~ m
|^/|) {
1129 $path = $drive->{file
};
1131 $path = PVE
::Storage
::path
($storecfg, $drive->{file
});
1134 if($path =~ m/^iscsi\:\/\
//){
1135 $devicetype = 'generic';
1137 if (my $info = path_is_scsi
($path)) {
1138 if ($info->{type
} == 0) {
1139 $devicetype = 'block';
1140 } elsif ($info->{type
} == 1) { # tape
1141 $devicetype = 'generic';
1147 if (!$conf->{scsihw
} || ($conf->{scsihw
} =~ m/^lsi/)){
1148 $device = "scsi-$devicetype,bus=scsihw$controller.0,scsi-id=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1150 $device = "scsi-$devicetype,bus=scsihw$controller.0,channel=0,scsi-id=0,lun=$drive->{index},drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1153 } elsif ($drive->{interface
} eq 'ide'){
1155 my $controller = int($drive->{index} / $maxdev);
1156 my $unit = $drive->{index} % $maxdev;
1157 my $devicetype = ($drive->{media
} && $drive->{media
} eq 'cdrom') ?
"cd" : "hd";
1159 $device = "ide-$devicetype,bus=ide.$controller,unit=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1160 } elsif ($drive->{interface
} eq 'sata'){
1161 my $controller = int($drive->{index} / $MAX_SATA_DISKS);
1162 my $unit = $drive->{index} % $MAX_SATA_DISKS;
1163 $device = "ide-drive,bus=ahci$controller.$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1164 } elsif ($drive->{interface
} eq 'usb') {
1166 # -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
1168 die "unsupported interface type";
1171 $device .= ",bootindex=$drive->{bootindex}" if $drive->{bootindex
};
1176 sub get_initiator_name
{
1179 my $fh = IO
::File-
>new('/etc/iscsi/initiatorname.iscsi') || return undef;
1180 while (defined(my $line = <$fh>)) {
1181 next if $line !~ m/^\s*InitiatorName\s*=\s*([\.\-:\w]+)/;
1190 sub print_drive_full
{
1191 my ($storecfg, $vmid, $drive) = @_;
1194 foreach my $o (@qemu_drive_options) {
1195 next if $o eq 'bootindex';
1196 $opts .= ",$o=$drive->{$o}" if $drive->{$o};
1199 foreach my $o (qw(bps bps_rd bps_wr)) {
1200 my $v = $drive->{"m$o"};
1201 $opts .= ",$o=" . int($v*1024*1024) if $v;
1204 # use linux-aio by default (qemu default is threads)
1205 $opts .= ",aio=native" if !$drive->{aio
};
1208 my $volid = $drive->{file
};
1209 if (drive_is_cdrom
($drive)) {
1210 $path = get_iso_path
($storecfg, $vmid, $volid);
1212 if ($volid =~ m
|^/|) {
1215 $path = PVE
::Storage
::path
($storecfg, $volid);
1219 $opts .= ",cache=none" if !$drive->{cache
} && !drive_is_cdrom
($drive);
1221 my $detectzeroes = $drive->{discard
} ?
"unmap" : "on";
1222 $opts .= ",detect-zeroes=$detectzeroes" if !drive_is_cdrom
($drive);
1224 my $pathinfo = $path ?
"file=$path," : '';
1226 return "${pathinfo}if=none,id=drive-$drive->{interface}$drive->{index}$opts";
1229 sub print_netdevice_full
{
1230 my ($vmid, $conf, $net, $netid, $bridges) = @_;
1232 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
1234 my $device = $net->{model
};
1235 if ($net->{model
} eq 'virtio') {
1236 $device = 'virtio-net-pci';
1239 # qemu > 0.15 always try to boot from network - we disable that by
1240 # not loading the pxe rom file
1241 my $extra = ($bootorder !~ m/n/) ?
"romfile=," : '';
1242 my $pciaddr = print_pci_addr
("$netid", $bridges);
1243 my $tmpstr = "$device,${extra}mac=$net->{macaddr},netdev=$netid$pciaddr,id=$netid";
1244 if ($net->{queues
} && $net->{queues
} > 1 && $net->{model
} eq 'virtio'){
1245 #Consider we have N queues, the number of vectors needed is 2*N + 2 (plus one config interrupt and control vq)
1246 my $vectors = $net->{queues
} * 2 + 2;
1247 $tmpstr .= ",vectors=$vectors,mq=on";
1249 $tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex
} ;
1253 sub print_netdev_full
{
1254 my ($vmid, $conf, $net, $netid) = @_;
1257 if ($netid =~ m/^net(\d+)$/) {
1261 die "got strange net id '$i'\n" if $i >= ${MAX_NETS
};
1263 my $ifname = "tap${vmid}i$i";
1265 # kvm uses TUNSETIFF ioctl, and that limits ifname length
1266 die "interface name '$ifname' is too long (max 15 character)\n"
1267 if length($ifname) >= 16;
1269 my $vhostparam = '';
1270 $vhostparam = ',vhost=on' if $kernel_has_vhost_net && $net->{model
} eq 'virtio';
1272 my $vmname = $conf->{name
} || "vm$vmid";
1276 if ($net->{bridge
}) {
1277 $netdev = "type=tap,id=$netid,ifname=${ifname},script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown$vhostparam";
1279 $netdev = "type=user,id=$netid,hostname=$vmname";
1282 $netdev .= ",queues=$net->{queues}" if ($net->{queues
} && $net->{model
} eq 'virtio');
1287 sub drive_is_cdrom
{
1290 return $drive && $drive->{media
} && ($drive->{media
} eq 'cdrom');
1299 foreach my $kvp (split(/,/, $data)) {
1301 if ($kvp =~ m/^memory=(\S+)$/) {
1302 $res->{memory
} = $1;
1303 } elsif ($kvp =~ m/^policy=(preferred|bind|interleave)$/) {
1304 $res->{policy
} = $1;
1305 } elsif ($kvp =~ m/^cpus=(\d+)(-(\d+))?$/) {
1306 $res->{cpus
}->{start
} = $1;
1307 $res->{cpus
}->{end
} = $3;
1308 } elsif ($kvp =~ m/^hostnodes=(\d+)(-(\d+))?$/) {
1309 $res->{hostnodes
}->{start
} = $1;
1310 $res->{hostnodes
}->{end
} = $3;
1322 return undef if !$value;
1325 my @list = split(/,/, $value);
1329 foreach my $kv (@list) {
1331 if ($kv =~ m/^(host=)?([a-f0-9]{2}:[a-f0-9]{2})(\.([a-f0-9]))?$/) {
1334 push @{$res->{pciid
}}, { id
=> $2 , function
=> $4};
1337 my $pcidevices = lspci
($2);
1338 $res->{pciid
} = $pcidevices->{$2};
1340 } elsif ($kv =~ m/^driver=(kvm|vfio)$/) {
1341 $res->{driver
} = $1;
1342 } elsif ($kv =~ m/^rombar=(on|off)$/) {
1343 $res->{rombar
} = $1;
1344 } elsif ($kv =~ m/^x-vga=(on|off)$/) {
1345 $res->{'x-vga'} = $1;
1346 } elsif ($kv =~ m/^pcie=(\d+)$/) {
1347 $res->{pcie
} = 1 if $1 == 1;
1349 warn "unknown hostpci setting '$kv'\n";
1353 return undef if !$found;
1358 # netX: e1000=XX:XX:XX:XX:XX:XX,bridge=vmbr0,rate=<mbps>
1364 foreach my $kvp (split(/,/, $data)) {
1366 if ($kvp =~ m/^(ne2k_pci|e1000|rtl8139|pcnet|virtio|ne2k_isa|i82551|i82557b|i82559er|vmxnet3)(=([0-9a-f]{2}(:[0-9a-f]{2}){5}))?$/i) {
1368 my $mac = defined($3) ?
uc($3) : PVE
::Tools
::random_ether_addr
();
1369 $res->{model
} = $model;
1370 $res->{macaddr
} = $mac;
1371 } elsif ($kvp =~ m/^bridge=(\S+)$/) {
1372 $res->{bridge
} = $1;
1373 } elsif ($kvp =~ m/^queues=(\d+)$/) {
1374 $res->{queues
} = $1;
1375 } elsif ($kvp =~ m/^rate=(\d+(\.\d+)?)$/) {
1377 } elsif ($kvp =~ m/^tag=(\d+)$/) {
1379 } elsif ($kvp =~ m/^firewall=(\d+)$/) {
1380 $res->{firewall
} = $1;
1387 return undef if !$res->{model
};
1395 my $res = "$net->{model}";
1396 $res .= "=$net->{macaddr}" if $net->{macaddr
};
1397 $res .= ",bridge=$net->{bridge}" if $net->{bridge
};
1398 $res .= ",rate=$net->{rate}" if $net->{rate
};
1399 $res .= ",tag=$net->{tag}" if $net->{tag
};
1400 $res .= ",firewall=$net->{firewall}" if $net->{firewall
};
1405 sub add_random_macs
{
1406 my ($settings) = @_;
1408 foreach my $opt (keys %$settings) {
1409 next if $opt !~ m/^net(\d+)$/;
1410 my $net = parse_net
($settings->{$opt});
1412 $settings->{$opt} = print_net
($net);
1416 sub add_unused_volume
{
1417 my ($config, $volid) = @_;
1420 for (my $ind = $MAX_UNUSED_DISKS - 1; $ind >= 0; $ind--) {
1421 my $test = "unused$ind";
1422 if (my $vid = $config->{$test}) {
1423 return if $vid eq $volid; # do not add duplicates
1429 die "To many unused volume - please delete them first.\n" if !$key;
1431 $config->{$key} = $volid;
1436 sub vm_is_volid_owner
{
1437 my ($storecfg, $vmid, $volid) = @_;
1439 if ($volid !~ m
|^/|) {
1441 eval { ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid); };
1442 if ($owner && ($owner == $vmid)) {
1450 sub vmconfig_delete_pending_option
{
1451 my ($conf, $key) = @_;
1453 delete $conf->{pending
}->{$key};
1454 my $pending_delete_hash = { $key => 1 };
1455 foreach my $opt (PVE
::Tools
::split_list
($conf->{pending
}->{delete})) {
1456 $pending_delete_hash->{$opt} = 1;
1458 $conf->{pending
}->{delete} = join(',', keys %$pending_delete_hash);
1461 sub vmconfig_undelete_pending_option
{
1462 my ($conf, $key) = @_;
1464 my $pending_delete_hash = {};
1465 foreach my $opt (PVE
::Tools
::split_list
($conf->{pending
}->{delete})) {
1466 $pending_delete_hash->{$opt} = 1;
1468 delete $pending_delete_hash->{$key};
1470 my @keylist = keys %$pending_delete_hash;
1471 if (scalar(@keylist)) {
1472 $conf->{pending
}->{delete} = join(',', @keylist);
1474 delete $conf->{pending
}->{delete};
1478 sub vmconfig_register_unused_drive
{
1479 my ($storecfg, $vmid, $conf, $drive) = @_;
1481 if (!drive_is_cdrom
($drive)) {
1482 my $volid = $drive->{file
};
1483 if (vm_is_volid_owner
($storecfg, $vmid, $volid)) {
1484 add_unused_volume
($conf, $volid, $vmid);
1489 sub vmconfig_cleanup_pending
{
1492 # remove pending changes when nothing changed
1494 foreach my $opt (keys %{$conf->{pending
}}) {
1495 if (defined($conf->{$opt}) && ($conf->{pending
}->{$opt} eq $conf->{$opt})) {
1497 delete $conf->{pending
}->{$opt};
1501 # remove delete if option is not set
1502 my $pending_delete_hash = {};
1503 foreach my $opt (PVE
::Tools
::split_list
($conf->{pending
}->{delete})) {
1504 if (defined($conf->{$opt})) {
1505 $pending_delete_hash->{$opt} = 1;
1511 my @keylist = keys %$pending_delete_hash;
1512 if (scalar(@keylist)) {
1513 $conf->{pending
}->{delete} = join(',', @keylist);
1515 delete $conf->{pending
}->{delete};
1521 my $valid_smbios1_options = {
1522 manufacturer
=> '\S+',
1526 uuid
=> '[a-fA-F0-9]{8}(?:-[a-fA-F0-9]{4}){3}-[a-fA-F0-9]{12}',
1531 # smbios: [manufacturer=str][,product=str][,version=str][,serial=str][,uuid=uuid][,sku=str][,family=str]
1537 foreach my $kvp (split(/,/, $data)) {
1538 return undef if $kvp !~ m/^(\S+)=(.+)$/;
1539 my ($k, $v) = split(/=/, $kvp);
1540 return undef if !defined($k) || !defined($v);
1541 return undef if !$valid_smbios1_options->{$k};
1542 return undef if $v !~ m/^$valid_smbios1_options->{$k}$/;
1553 foreach my $k (keys %$smbios1) {
1554 next if !defined($smbios1->{$k});
1555 next if !$valid_smbios1_options->{$k};
1556 $data .= ',' if $data;
1557 $data .= "$k=$smbios1->{$k}";
1562 PVE
::JSONSchema
::register_format
('pve-qm-smbios1', \
&verify_smbios1
);
1563 sub verify_smbios1
{
1564 my ($value, $noerr) = @_;
1566 return $value if parse_smbios1
($value);
1568 return undef if $noerr;
1570 die "unable to parse smbios (type 1) options\n";
1573 PVE
::JSONSchema
::register_format
('pve-qm-bootdisk', \
&verify_bootdisk
);
1574 sub verify_bootdisk
{
1575 my ($value, $noerr) = @_;
1577 return $value if valid_drivename
($value);
1579 return undef if $noerr;
1581 die "invalid boot disk '$value'\n";
1584 PVE
::JSONSchema
::register_format
('pve-qm-numanode', \
&verify_numa
);
1586 my ($value, $noerr) = @_;
1588 return $value if parse_numa
($value);
1590 return undef if $noerr;
1592 die "unable to parse numa options\n";
1595 PVE
::JSONSchema
::register_format
('pve-qm-net', \
&verify_net
);
1597 my ($value, $noerr) = @_;
1599 return $value if parse_net
($value);
1601 return undef if $noerr;
1603 die "unable to parse network options\n";
1606 PVE
::JSONSchema
::register_format
('pve-qm-drive', \
&verify_drive
);
1608 my ($value, $noerr) = @_;
1610 return $value if parse_drive
(undef, $value);
1612 return undef if $noerr;
1614 die "unable to parse drive options\n";
1617 PVE
::JSONSchema
::register_format
('pve-qm-hostpci', \
&verify_hostpci
);
1618 sub verify_hostpci
{
1619 my ($value, $noerr) = @_;
1621 return $value if parse_hostpci
($value);
1623 return undef if $noerr;
1625 die "unable to parse pci id\n";
1628 PVE
::JSONSchema
::register_format
('pve-qm-watchdog', \
&verify_watchdog
);
1629 sub verify_watchdog
{
1630 my ($value, $noerr) = @_;
1632 return $value if parse_watchdog
($value);
1634 return undef if $noerr;
1636 die "unable to parse watchdog options\n";
1639 sub parse_watchdog
{
1642 return undef if !$value;
1646 foreach my $p (split(/,/, $value)) {
1647 next if $p =~ m/^\s*$/;
1649 if ($p =~ m/^(model=)?(i6300esb|ib700)$/) {
1651 } elsif ($p =~ m/^(action=)?(reset|shutdown|poweroff|pause|debug|none)$/) {
1652 $res->{action
} = $2;
1661 PVE
::JSONSchema
::register_format
('pve-qm-startup', \
&verify_startup
);
1662 sub verify_startup
{
1663 my ($value, $noerr) = @_;
1665 return $value if parse_startup
($value);
1667 return undef if $noerr;
1669 die "unable to parse startup options\n";
1675 return undef if !$value;
1679 foreach my $p (split(/,/, $value)) {
1680 next if $p =~ m/^\s*$/;
1682 if ($p =~ m/^(order=)?(\d+)$/) {
1684 } elsif ($p =~ m/^up=(\d+)$/) {
1686 } elsif ($p =~ m/^down=(\d+)$/) {
1696 sub parse_usb_device
{
1699 return undef if !$value;
1701 my @dl = split(/,/, $value);
1705 foreach my $v (@dl) {
1706 if ($v =~ m/^host=(0x)?([0-9A-Fa-f]{4}):(0x)?([0-9A-Fa-f]{4})$/) {
1708 $res->{vendorid
} = $2;
1709 $res->{productid
} = $4;
1710 } elsif ($v =~ m/^host=(\d+)\-(\d+(\.\d+)*)$/) {
1712 $res->{hostbus
} = $1;
1713 $res->{hostport
} = $2;
1714 } elsif ($v =~ m/^spice$/) {
1721 return undef if !$found;
1726 PVE
::JSONSchema
::register_format
('pve-qm-usb-device', \
&verify_usb_device
);
1727 sub verify_usb_device
{
1728 my ($value, $noerr) = @_;
1730 return $value if parse_usb_device
($value);
1732 return undef if $noerr;
1734 die "unable to parse usb device\n";
1737 # add JSON properties for create and set function
1738 sub json_config_properties
{
1741 foreach my $opt (keys %$confdesc) {
1742 next if $opt eq 'parent' || $opt eq 'snaptime' || $opt eq 'vmstate';
1743 $prop->{$opt} = $confdesc->{$opt};
1750 my ($key, $value) = @_;
1752 die "unknown setting '$key'\n" if !$confdesc->{$key};
1754 my $type = $confdesc->{$key}->{type
};
1756 if (!defined($value)) {
1757 die "got undefined value\n";
1760 if ($value =~ m/[\n\r]/) {
1761 die "property contains a line feed\n";
1764 if ($type eq 'boolean') {
1765 return 1 if ($value eq '1') || ($value =~ m/^(on|yes|true)$/i);
1766 return 0 if ($value eq '0') || ($value =~ m/^(off|no|false)$/i);
1767 die "type check ('boolean') failed - got '$value'\n";
1768 } elsif ($type eq 'integer') {
1769 return int($1) if $value =~ m/^(\d+)$/;
1770 die "type check ('integer') failed - got '$value'\n";
1771 } elsif ($type eq 'number') {
1772 return $value if $value =~ m/^(\d+)(\.\d+)?$/;
1773 die "type check ('number') failed - got '$value'\n";
1774 } elsif ($type eq 'string') {
1775 if (my $fmt = $confdesc->{$key}->{format
}) {
1776 if ($fmt eq 'pve-qm-drive') {
1777 # special case - we need to pass $key to parse_drive()
1778 my $drive = parse_drive
($key, $value);
1779 return $value if $drive;
1780 die "unable to parse drive options\n";
1782 PVE
::JSONSchema
::check_format
($fmt, $value);
1785 $value =~ s/^\"(.*)\"$/$1/;
1788 die "internal error"
1792 sub lock_config_full
{
1793 my ($vmid, $timeout, $code, @param) = @_;
1795 my $filename = config_file_lock
($vmid);
1797 my $res = lock_file
($filename, $timeout, $code, @param);
1804 sub lock_config_mode
{
1805 my ($vmid, $timeout, $shared, $code, @param) = @_;
1807 my $filename = config_file_lock
($vmid);
1809 my $res = lock_file_full
($filename, $timeout, $shared, $code, @param);
1817 my ($vmid, $code, @param) = @_;
1819 return lock_config_full
($vmid, 10, $code, @param);
1822 sub cfs_config_path
{
1823 my ($vmid, $node) = @_;
1825 $node = $nodename if !$node;
1826 return "nodes/$node/qemu-server/$vmid.conf";
1829 sub check_iommu_support
{
1830 #fixme : need to check IOMMU support
1831 #http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM
1839 my ($vmid, $node) = @_;
1841 my $cfspath = cfs_config_path
($vmid, $node);
1842 return "/etc/pve/$cfspath";
1845 sub config_file_lock
{
1848 return "$lock_dir/lock-$vmid.conf";
1854 my $conf = config_file
($vmid);
1855 utime undef, undef, $conf;
1859 my ($storecfg, $vmid, $keep_empty_config) = @_;
1861 my $conffile = config_file
($vmid);
1863 my $conf = load_config
($vmid);
1867 # only remove disks owned by this VM
1868 foreach_drive
($conf, sub {
1869 my ($ds, $drive) = @_;
1871 return if drive_is_cdrom
($drive);
1873 my $volid = $drive->{file
};
1875 return if !$volid || $volid =~ m
|^/|;
1877 my ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid);
1878 return if !$path || !$owner || ($owner != $vmid);
1880 PVE
::Storage
::vdisk_free
($storecfg, $volid);
1883 if ($keep_empty_config) {
1884 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
1889 # also remove unused disk
1891 my $dl = PVE
::Storage
::vdisk_list
($storecfg, undef, $vmid);
1894 PVE
::Storage
::foreach_volid
($dl, sub {
1895 my ($volid, $sid, $volname, $d) = @_;
1896 PVE
::Storage
::vdisk_free
($storecfg, $volid);
1906 my ($vmid, $node) = @_;
1908 my $cfspath = cfs_config_path
($vmid, $node);
1910 my $conf = PVE
::Cluster
::cfs_read_file
($cfspath);
1912 die "no such VM ('$vmid')\n" if !defined($conf);
1917 sub parse_vm_config
{
1918 my ($filename, $raw) = @_;
1920 return undef if !defined($raw);
1923 digest
=> Digest
::SHA
::sha1_hex
($raw),
1928 $filename =~ m
|/qemu-server/(\d
+)\
.conf
$|
1929 || die "got strange filename '$filename'";
1937 my @lines = split(/\n/, $raw);
1938 foreach my $line (@lines) {
1939 next if $line =~ m/^\s*$/;
1941 if ($line =~ m/^\[PENDING\]\s*$/i) {
1942 $section = 'pending';
1943 $conf->{description
} = $descr if $descr;
1945 $conf = $res->{$section} = {};
1948 } elsif ($line =~ m/^\[([a-z][a-z0-9_\-]+)\]\s*$/i) {
1950 $conf->{description
} = $descr if $descr;
1952 $conf = $res->{snapshots
}->{$section} = {};
1956 if ($line =~ m/^\#(.*)\s*$/) {
1957 $descr .= PVE
::Tools
::decode_text
($1) . "\n";
1961 if ($line =~ m/^(description):\s*(.*\S)\s*$/) {
1962 $descr .= PVE
::Tools
::decode_text
($2);
1963 } elsif ($line =~ m/snapstate:\s*(prepare|delete)\s*$/) {
1964 $conf->{snapstate
} = $1;
1965 } elsif ($line =~ m/^(args):\s*(.*\S)\s*$/) {
1968 $conf->{$key} = $value;
1969 } elsif ($line =~ m/^delete:\s*(.*\S)\s*$/) {
1971 if ($section eq 'pending') {
1972 $conf->{delete} = $value; # we parse this later
1974 warn "vm $vmid - propertry 'delete' is only allowed in [PENDING]\n";
1976 } elsif ($line =~ m/^([a-z][a-z_]*\d*):\s*(\S+)\s*$/) {
1979 eval { $value = check_type
($key, $value); };
1981 warn "vm $vmid - unable to parse value of '$key' - $@";
1983 my $fmt = $confdesc->{$key}->{format
};
1984 if ($fmt && $fmt eq 'pve-qm-drive') {
1985 my $v = parse_drive
($key, $value);
1986 if (my $volid = filename_to_volume_id
($vmid, $v->{file
}, $v->{media
})) {
1987 $v->{file
} = $volid;
1988 $value = print_drive
($vmid, $v);
1990 warn "vm $vmid - unable to parse value of '$key'\n";
1995 if ($key eq 'cdrom') {
1996 $conf->{ide2
} = $value;
1998 $conf->{$key} = $value;
2004 $conf->{description
} = $descr if $descr;
2006 delete $res->{snapstate
}; # just to be sure
2011 sub write_vm_config
{
2012 my ($filename, $conf) = @_;
2014 delete $conf->{snapstate
}; # just to be sure
2016 if ($conf->{cdrom
}) {
2017 die "option ide2 conflicts with cdrom\n" if $conf->{ide2
};
2018 $conf->{ide2
} = $conf->{cdrom
};
2019 delete $conf->{cdrom
};
2022 # we do not use 'smp' any longer
2023 if ($conf->{sockets
}) {
2024 delete $conf->{smp
};
2025 } elsif ($conf->{smp
}) {
2026 $conf->{sockets
} = $conf->{smp
};
2027 delete $conf->{cores
};
2028 delete $conf->{smp
};
2031 if ($conf->{maxcpus
} && $conf->{sockets
}) {
2032 delete $conf->{sockets
};
2035 my $used_volids = {};
2037 my $cleanup_config = sub {
2038 my ($cref, $pending, $snapname) = @_;
2040 foreach my $key (keys %$cref) {
2041 next if $key eq 'digest' || $key eq 'description' || $key eq 'snapshots' ||
2042 $key eq 'snapstate' || $key eq 'pending';
2043 my $value = $cref->{$key};
2044 if ($key eq 'delete') {
2045 die "propertry 'delete' is only allowed in [PENDING]\n"
2047 # fixme: check syntax?
2050 eval { $value = check_type
($key, $value); };
2051 die "unable to parse value of '$key' - $@" if $@;
2053 $cref->{$key} = $value;
2055 if (!$snapname && valid_drivename
($key)) {
2056 my $drive = parse_drive
($key, $value);
2057 $used_volids->{$drive->{file
}} = 1 if $drive && $drive->{file
};
2062 &$cleanup_config($conf);
2064 &$cleanup_config($conf->{pending
}, 1);
2066 foreach my $snapname (keys %{$conf->{snapshots
}}) {
2067 die "internal error" if $snapname eq 'pending';
2068 &$cleanup_config($conf->{snapshots
}->{$snapname}, undef, $snapname);
2071 # remove 'unusedX' settings if we re-add a volume
2072 foreach my $key (keys %$conf) {
2073 my $value = $conf->{$key};
2074 if ($key =~ m/^unused/ && $used_volids->{$value}) {
2075 delete $conf->{$key};
2079 my $generate_raw_config = sub {
2084 # add description as comment to top of file
2085 my $descr = $conf->{description
} || '';
2086 foreach my $cl (split(/\n/, $descr)) {
2087 $raw .= '#' . PVE
::Tools
::encode_text
($cl) . "\n";
2090 foreach my $key (sort keys %$conf) {
2091 next if $key eq 'digest' || $key eq 'description' || $key eq 'pending' || $key eq 'snapshots';
2092 $raw .= "$key: $conf->{$key}\n";
2097 my $raw = &$generate_raw_config($conf);
2099 if (scalar(keys %{$conf->{pending
}})){
2100 $raw .= "\n[PENDING]\n";
2101 $raw .= &$generate_raw_config($conf->{pending
});
2104 foreach my $snapname (sort keys %{$conf->{snapshots
}}) {
2105 $raw .= "\n[$snapname]\n";
2106 $raw .= &$generate_raw_config($conf->{snapshots
}->{$snapname});
2112 sub update_config_nolock
{
2113 my ($vmid, $conf, $skiplock) = @_;
2115 check_lock
($conf) if !$skiplock;
2117 my $cfspath = cfs_config_path
($vmid);
2119 PVE
::Cluster
::cfs_write_file
($cfspath, $conf);
2123 my ($vmid, $conf, $skiplock) = @_;
2125 lock_config
($vmid, &update_config_nolock
, $conf, $skiplock);
2132 # we use static defaults from our JSON schema configuration
2133 foreach my $key (keys %$confdesc) {
2134 if (defined(my $default = $confdesc->{$key}->{default})) {
2135 $res->{$key} = $default;
2139 my $conf = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
2140 $res->{keyboard
} = $conf->{keyboard
} if $conf->{keyboard
};
2146 my $vmlist = PVE
::Cluster
::get_vmlist
();
2148 return $res if !$vmlist || !$vmlist->{ids
};
2149 my $ids = $vmlist->{ids
};
2151 foreach my $vmid (keys %$ids) {
2152 my $d = $ids->{$vmid};
2153 next if !$d->{node
} || $d->{node
} ne $nodename;
2154 next if !$d->{type
} || $d->{type
} ne 'qemu';
2155 $res->{$vmid}->{exists} = 1;
2160 # test if VM uses local resources (to prevent migration)
2161 sub check_local_resources
{
2162 my ($conf, $noerr) = @_;
2166 $loc_res = 1 if $conf->{hostusb
}; # old syntax
2167 $loc_res = 1 if $conf->{hostpci
}; # old syntax
2169 foreach my $k (keys %$conf) {
2170 next if $k =~ m/^usb/ && ($conf->{$k} eq 'spice');
2171 $loc_res = 1 if $k =~ m/^(usb|hostpci|serial|parallel)\d+$/;
2174 die "VM uses local resources\n" if $loc_res && !$noerr;
2179 # check if used storages are available on all nodes (use by migrate)
2180 sub check_storage_availability
{
2181 my ($storecfg, $conf, $node) = @_;
2183 foreach_drive
($conf, sub {
2184 my ($ds, $drive) = @_;
2186 my $volid = $drive->{file
};
2189 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2192 # check if storage is available on both nodes
2193 my $scfg = PVE
::Storage
::storage_check_node
($storecfg, $sid);
2194 PVE
::Storage
::storage_check_node
($storecfg, $sid, $node);
2198 # list nodes where all VM images are available (used by has_feature API)
2200 my ($conf, $storecfg) = @_;
2202 my $nodelist = PVE
::Cluster
::get_nodelist
();
2203 my $nodehash = { map { $_ => 1 } @$nodelist };
2204 my $nodename = PVE
::INotify
::nodename
();
2206 foreach_drive
($conf, sub {
2207 my ($ds, $drive) = @_;
2209 my $volid = $drive->{file
};
2212 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2214 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
2215 if ($scfg->{disable
}) {
2217 } elsif (my $avail = $scfg->{nodes
}) {
2218 foreach my $node (keys %$nodehash) {
2219 delete $nodehash->{$node} if !$avail->{$node};
2221 } elsif (!$scfg->{shared
}) {
2222 foreach my $node (keys %$nodehash) {
2223 delete $nodehash->{$node} if $node ne $nodename
2235 die "VM is locked ($conf->{lock})\n" if $conf->{lock};
2239 my ($pidfile, $pid) = @_;
2241 my $fh = IO
::File-
>new("/proc/$pid/cmdline", "r");
2245 return undef if !$line;
2246 my @param = split(/\0/, $line);
2248 my $cmd = $param[0];
2249 return if !$cmd || ($cmd !~ m
|kvm
$| && $cmd !~ m
|qemu-system-x86_64
$|);
2251 for (my $i = 0; $i < scalar (@param); $i++) {
2254 if (($p eq '-pidfile') || ($p eq '--pidfile')) {
2255 my $p = $param[$i+1];
2256 return 1 if $p && ($p eq $pidfile);
2265 my ($vmid, $nocheck, $node) = @_;
2267 my $filename = config_file
($vmid, $node);
2269 die "unable to find configuration file for VM $vmid - no such machine\n"
2270 if !$nocheck && ! -f
$filename;
2272 my $pidfile = pidfile_name
($vmid);
2274 if (my $fd = IO
::File-
>new("<$pidfile")) {
2279 my $mtime = $st->mtime;
2280 if ($mtime > time()) {
2281 warn "file '$filename' modified in future\n";
2284 if ($line =~ m/^(\d+)$/) {
2286 if (check_cmdline
($pidfile, $pid)) {
2287 if (my $pinfo = PVE
::ProcFSTools
::check_process_running
($pid)) {
2299 my $vzlist = config_list
();
2301 my $fd = IO
::Dir-
>new($var_run_tmpdir) || return $vzlist;
2303 while (defined(my $de = $fd->read)) {
2304 next if $de !~ m/^(\d+)\.pid$/;
2306 next if !defined($vzlist->{$vmid});
2307 if (my $pid = check_running
($vmid)) {
2308 $vzlist->{$vmid}->{pid
} = $pid;
2316 my ($storecfg, $conf) = @_;
2318 my $bootdisk = $conf->{bootdisk
};
2319 return undef if !$bootdisk;
2320 return undef if !valid_drivename
($bootdisk);
2322 return undef if !$conf->{$bootdisk};
2324 my $drive = parse_drive
($bootdisk, $conf->{$bootdisk});
2325 return undef if !defined($drive);
2327 return undef if drive_is_cdrom
($drive);
2329 my $volid = $drive->{file
};
2330 return undef if !$volid;
2332 return $drive->{size
};
2335 my $last_proc_pid_stat;
2337 # get VM status information
2338 # This must be fast and should not block ($full == false)
2339 # We only query KVM using QMP if $full == true (this can be slow)
2341 my ($opt_vmid, $full) = @_;
2345 my $storecfg = PVE
::Storage
::config
();
2347 my $list = vzlist
();
2348 my ($uptime) = PVE
::ProcFSTools
::read_proc_uptime
(1);
2350 my $cpucount = $cpuinfo->{cpus
} || 1;
2352 foreach my $vmid (keys %$list) {
2353 next if $opt_vmid && ($vmid ne $opt_vmid);
2355 my $cfspath = cfs_config_path
($vmid);
2356 my $conf = PVE
::Cluster
::cfs_read_file
($cfspath) || {};
2359 $d->{pid
} = $list->{$vmid}->{pid
};
2361 # fixme: better status?
2362 $d->{status
} = $list->{$vmid}->{pid
} ?
'running' : 'stopped';
2364 my $size = disksize
($storecfg, $conf);
2365 if (defined($size)) {
2366 $d->{disk
} = 0; # no info available
2367 $d->{maxdisk
} = $size;
2373 $d->{cpus
} = ($conf->{sockets
} || 1) * ($conf->{cores
} || 1);
2374 $d->{cpus
} = $cpucount if $d->{cpus
} > $cpucount;
2376 $d->{name
} = $conf->{name
} || "VM $vmid";
2377 $d->{maxmem
} = $conf->{memory
} ?
$conf->{memory
}*(1024*1024) : 0;
2379 if ($conf->{balloon
}) {
2380 $d->{balloon_min
} = $conf->{balloon
}*(1024*1024);
2381 $d->{shares
} = defined($conf->{shares
}) ?
$conf->{shares
} : 1000;
2392 $d->{diskwrite
} = 0;
2394 $d->{template
} = is_template
($conf);
2399 my $netdev = PVE
::ProcFSTools
::read_proc_net_dev
();
2400 foreach my $dev (keys %$netdev) {
2401 next if $dev !~ m/^tap([1-9]\d*)i/;
2403 my $d = $res->{$vmid};
2406 $d->{netout
} += $netdev->{$dev}->{receive
};
2407 $d->{netin
} += $netdev->{$dev}->{transmit
};
2410 my $ctime = gettimeofday
;
2412 foreach my $vmid (keys %$list) {
2414 my $d = $res->{$vmid};
2415 my $pid = $d->{pid
};
2418 my $pstat = PVE
::ProcFSTools
::read_proc_pid_stat
($pid);
2419 next if !$pstat; # not running
2421 my $used = $pstat->{utime} + $pstat->{stime
};
2423 $d->{uptime
} = int(($uptime - $pstat->{starttime
})/$cpuinfo->{user_hz
});
2425 if ($pstat->{vsize
}) {
2426 $d->{mem
} = int(($pstat->{rss
}/$pstat->{vsize
})*$d->{maxmem
});
2429 my $old = $last_proc_pid_stat->{$pid};
2431 $last_proc_pid_stat->{$pid} = {
2439 my $dtime = ($ctime - $old->{time}) * $cpucount * $cpuinfo->{user_hz
};
2441 if ($dtime > 1000) {
2442 my $dutime = $used - $old->{used
};
2444 $d->{cpu
} = (($dutime/$dtime)* $cpucount) / $d->{cpus
};
2445 $last_proc_pid_stat->{$pid} = {
2451 $d->{cpu
} = $old->{cpu
};
2455 return $res if !$full;
2457 my $qmpclient = PVE
::QMPClient-
>new();
2459 my $ballooncb = sub {
2460 my ($vmid, $resp) = @_;
2462 my $info = $resp->{'return'};
2463 return if !$info->{max_mem
};
2465 my $d = $res->{$vmid};
2467 # use memory assigned to VM
2468 $d->{maxmem
} = $info->{max_mem
};
2469 $d->{balloon
} = $info->{actual
};
2471 if (defined($info->{total_mem
}) && defined($info->{free_mem
})) {
2472 $d->{mem
} = $info->{total_mem
} - $info->{free_mem
};
2473 $d->{freemem
} = $info->{free_mem
};
2478 my $blockstatscb = sub {
2479 my ($vmid, $resp) = @_;
2480 my $data = $resp->{'return'} || [];
2481 my $totalrdbytes = 0;
2482 my $totalwrbytes = 0;
2483 for my $blockstat (@$data) {
2484 $totalrdbytes = $totalrdbytes + $blockstat->{stats
}->{rd_bytes
};
2485 $totalwrbytes = $totalwrbytes + $blockstat->{stats
}->{wr_bytes
};
2487 $res->{$vmid}->{diskread
} = $totalrdbytes;
2488 $res->{$vmid}->{diskwrite
} = $totalwrbytes;
2491 my $statuscb = sub {
2492 my ($vmid, $resp) = @_;
2494 $qmpclient->queue_cmd($vmid, $blockstatscb, 'query-blockstats');
2495 # this fails if ballon driver is not loaded, so this must be
2496 # the last commnand (following command are aborted if this fails).
2497 $qmpclient->queue_cmd($vmid, $ballooncb, 'query-balloon');
2499 my $status = 'unknown';
2500 if (!defined($status = $resp->{'return'}->{status
})) {
2501 warn "unable to get VM status\n";
2505 $res->{$vmid}->{qmpstatus
} = $resp->{'return'}->{status
};
2508 foreach my $vmid (keys %$list) {
2509 next if $opt_vmid && ($vmid ne $opt_vmid);
2510 next if !$res->{$vmid}->{pid
}; # not running
2511 $qmpclient->queue_cmd($vmid, $statuscb, 'query-status');
2514 $qmpclient->queue_execute(undef, 1);
2516 foreach my $vmid (keys %$list) {
2517 next if $opt_vmid && ($vmid ne $opt_vmid);
2518 $res->{$vmid}->{qmpstatus
} = $res->{$vmid}->{status
} if !$res->{$vmid}->{qmpstatus
};
2525 my ($conf, $func) = @_;
2527 foreach my $ds (keys %$conf) {
2528 next if !valid_drivename
($ds);
2530 my $drive = parse_drive
($ds, $conf->{$ds});
2533 &$func($ds, $drive);
2538 my ($conf, $func) = @_;
2542 my $test_volid = sub {
2543 my ($volid, $is_cdrom) = @_;
2547 $volhash->{$volid} = $is_cdrom || 0;
2550 foreach_drive
($conf, sub {
2551 my ($ds, $drive) = @_;
2552 &$test_volid($drive->{file
}, drive_is_cdrom
($drive));
2555 foreach my $snapname (keys %{$conf->{snapshots
}}) {
2556 my $snap = $conf->{snapshots
}->{$snapname};
2557 &$test_volid($snap->{vmstate
}, 0);
2558 foreach_drive
($snap, sub {
2559 my ($ds, $drive) = @_;
2560 &$test_volid($drive->{file
}, drive_is_cdrom
($drive));
2564 foreach my $volid (keys %$volhash) {
2565 &$func($volid, $volhash->{$volid});
2569 sub vga_conf_has_spice
{
2572 return 0 if !$vga || $vga !~ m/^qxl([234])?$/;
2577 sub config_to_command
{
2578 my ($storecfg, $vmid, $conf, $defaults, $forcemachine) = @_;
2581 my $globalFlags = [];
2582 my $machineFlags = [];
2588 my $kvmver = kvm_user_version
();
2589 my $vernum = 0; # unknown
2590 if ($kvmver =~ m/^(\d+)\.(\d+)$/) {
2591 $vernum = $1*1000000+$2*1000;
2592 } elsif ($kvmver =~ m/^(\d+)\.(\d+)\.(\d+)$/) {
2593 $vernum = $1*1000000+$2*1000+$3;
2596 die "detected old qemu-kvm binary ($kvmver)\n" if $vernum < 15000;
2598 my $have_ovz = -f
'/proc/vz/vestat';
2600 my $q35 = machine_type_is_q35
($conf);
2602 push @$cmd, '/usr/bin/kvm';
2604 push @$cmd, '-id', $vmid;
2608 my $qmpsocket = qmp_socket
($vmid);
2609 push @$cmd, '-chardev', "socket,id=qmp,path=$qmpsocket,server,nowait";
2610 push @$cmd, '-mon', "chardev=qmp,mode=control";
2612 my $socket = vnc_socket
($vmid);
2613 push @$cmd, '-vnc', "unix:$socket,x509,password";
2615 push @$cmd, '-pidfile' , pidfile_name
($vmid);
2617 push @$cmd, '-daemonize';
2619 if ($conf->{smbios1
}) {
2620 push @$cmd, '-smbios', "type=1,$conf->{smbios1}";
2623 push @$cmd, '-object', "iothread,id=iothread0" if $conf->{iothread
};
2626 # the q35 chipset support native usb2, so we enable usb controller
2627 # by default for this machine type
2628 push @$devices, '-readconfig', '/usr/share/qemu-server/pve-q35.cfg';
2630 $pciaddr = print_pci_addr
("piix3", $bridges);
2631 push @$devices, '-device', "piix3-usb-uhci,id=uhci$pciaddr.0x2";
2634 for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
2635 next if !$conf->{"usb$i"};
2638 # include usb device config
2639 push @$devices, '-readconfig', '/usr/share/qemu-server/pve-usb.cfg' if $use_usb2;
2642 my $vga = $conf->{vga
};
2644 my $qxlnum = vga_conf_has_spice
($vga);
2645 $vga = 'qxl' if $qxlnum;
2648 if ($conf->{ostype
} && ($conf->{ostype
} eq 'win8' ||
2649 $conf->{ostype
} eq 'win7' ||
2650 $conf->{ostype
} eq 'w2k8')) {
2657 # enable absolute mouse coordinates (needed by vnc)
2659 if (defined($conf->{tablet
})) {
2660 $tablet = $conf->{tablet
};
2662 $tablet = $defaults->{tablet
};
2663 $tablet = 0 if $qxlnum; # disable for spice because it is not needed
2664 $tablet = 0 if $vga =~ m/^serial\d+$/; # disable if we use serial terminal (no vga card)
2667 push @$devices, '-device', print_tabletdevice_full
($conf) if $tablet;
2670 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
2671 my $d = parse_hostpci
($conf->{"hostpci$i"});
2674 my $pcie = $d->{pcie
};
2676 die "q35 machine model is not enabled" if !$q35;
2677 $pciaddr = print_pcie_addr
("hostpci$i");
2679 $pciaddr = print_pci_addr
("hostpci$i", $bridges);
2682 my $rombar = $d->{rombar
} && $d->{rombar
} eq 'off' ?
",rombar=0" : "";
2683 my $driver = $d->{driver
} && $d->{driver
} eq 'vfio' ?
"vfio-pci" : "pci-assign";
2684 my $xvga = $d->{'x-vga'} && $d->{'x-vga'} eq 'on' ?
",x-vga=on" : "";
2685 if ($xvga && $xvga ne '') {
2686 push @$cpuFlags, 'kvm=off';
2689 $driver = "vfio-pci" if $xvga ne '';
2690 my $pcidevices = $d->{pciid
};
2691 my $multifunction = 1 if @$pcidevices > 1;
2694 foreach my $pcidevice (@$pcidevices) {
2696 my $id = "hostpci$i";
2697 $id .= ".$j" if $multifunction;
2698 my $addr = $pciaddr;
2699 $addr .= ".$j" if $multifunction;
2700 my $devicestr = "$driver,host=$pcidevice->{id}.$pcidevice->{function},id=$id$addr";
2703 $devicestr .= "$rombar$xvga";
2704 $devicestr .= ",multifunction=on" if $multifunction;
2707 push @$devices, '-device', $devicestr;
2713 for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
2714 my $d = parse_usb_device
($conf->{"usb$i"});
2716 if ($d->{vendorid
} && $d->{productid
}) {
2717 push @$devices, '-device', "usb-host,vendorid=0x$d->{vendorid},productid=0x$d->{productid}";
2718 } elsif (defined($d->{hostbus
}) && defined($d->{hostport
})) {
2719 push @$devices, '-device', "usb-host,hostbus=$d->{hostbus},hostport=$d->{hostport}";
2720 } elsif ($d->{spice
}) {
2721 # usb redir support for spice
2722 push @$devices, '-chardev', "spicevmc,id=usbredirchardev$i,name=usbredir";
2723 push @$devices, '-device', "usb-redir,chardev=usbredirchardev$i,id=usbredirdev$i,bus=ehci.0";
2728 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
2729 if (my $path = $conf->{"serial$i"}) {
2730 if ($path eq 'socket') {
2731 my $socket = "/var/run/qemu-server/${vmid}.serial$i";
2732 push @$devices, '-chardev', "socket,id=serial$i,path=$socket,server,nowait";
2733 push @$devices, '-device', "isa-serial,chardev=serial$i";
2735 die "no such serial device\n" if ! -c
$path;
2736 push @$devices, '-chardev', "tty,id=serial$i,path=$path";
2737 push @$devices, '-device', "isa-serial,chardev=serial$i";
2743 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
2744 if (my $path = $conf->{"parallel$i"}) {
2745 die "no such parallel device\n" if ! -c
$path;
2746 my $devtype = $path =~ m!^/dev/usb/lp! ?
'tty' : 'parport';
2747 push @$devices, '-chardev', "$devtype,id=parallel$i,path=$path";
2748 push @$devices, '-device', "isa-parallel,chardev=parallel$i";
2752 my $vmname = $conf->{name
} || "vm$vmid";
2754 push @$cmd, '-name', $vmname;
2757 $sockets = $conf->{smp
} if $conf->{smp
}; # old style - no longer iused
2758 $sockets = $conf->{sockets
} if $conf->{sockets
};
2760 my $cores = $conf->{cores
} || 1;
2761 my $maxcpus = $conf->{maxcpus
} if $conf->{maxcpus
};
2763 my $total_cores = $sockets * $cores;
2764 my $allowed_cores = $cpuinfo->{cpus
};
2766 die "MAX $allowed_cores cores allowed per VM on this node\n"
2767 if ($allowed_cores < $total_cores);
2770 push @$cmd, '-smp', "cpus=$cores,maxcpus=$maxcpus";
2772 push @$cmd, '-smp', "sockets=$sockets,cores=$cores";
2775 push @$cmd, '-nodefaults';
2777 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
2779 my $bootindex_hash = {};
2781 foreach my $o (split(//, $bootorder)) {
2782 $bootindex_hash->{$o} = $i*100;
2786 push @$cmd, '-boot', "menu=on";
2788 push @$cmd, '-no-acpi' if defined($conf->{acpi
}) && $conf->{acpi
} == 0;
2790 push @$cmd, '-no-reboot' if defined($conf->{reboot
}) && $conf->{reboot
} == 0;
2792 push @$cmd, '-vga', $vga if $vga && $vga !~ m/^serial\d+$/; # for kvm 77 and later
2795 my $tdf = defined($conf->{tdf
}) ?
$conf->{tdf
} : $defaults->{tdf
};
2797 my $nokvm = defined($conf->{kvm
}) && $conf->{kvm
} == 0 ?
1 : 0;
2798 my $useLocaltime = $conf->{localtime};
2800 if (my $ost = $conf->{ostype
}) {
2801 # other, wxp, w2k, w2k3, w2k8, wvista, win7, win8, l24, l26, solaris
2803 if ($ost =~ m/^w/) { # windows
2804 $useLocaltime = 1 if !defined($conf->{localtime});
2806 # use time drift fix when acpi is enabled
2807 if (!(defined($conf->{acpi
}) && $conf->{acpi
} == 0)) {
2808 $tdf = 1 if !defined($conf->{tdf
});
2812 if ($ost eq 'win7' || $ost eq 'win8' || $ost eq 'w2k8' ||
2814 push @$globalFlags, 'kvm-pit.lost_tick_policy=discard';
2815 push @$cmd, '-no-hpet';
2816 #push @$cpuFlags , 'hv_vapic" if !$nokvm; #fixme, my win2008R2 hang at boot with this
2817 push @$cpuFlags , 'hv_spinlocks=0xffff' if !$nokvm;
2820 if ($ost eq 'win7' || $ost eq 'win8') {
2821 push @$cpuFlags , 'hv_relaxed' if !$nokvm;
2825 push @$rtcFlags, 'driftfix=slew' if $tdf;
2828 push @$machineFlags, 'accel=tcg';
2830 die "No accelerator found!\n" if !$cpuinfo->{hvm
};
2833 my $machine_type = $forcemachine || $conf->{machine
};
2834 if ($machine_type) {
2835 push @$machineFlags, "type=${machine_type}";
2838 if ($conf->{startdate
}) {
2839 push @$rtcFlags, "base=$conf->{startdate}";
2840 } elsif ($useLocaltime) {
2841 push @$rtcFlags, 'base=localtime';
2844 my $cpu = $nokvm ?
"qemu64" : "kvm64";
2845 $cpu = $conf->{cpu
} if $conf->{cpu
};
2847 push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64';
2849 push @$cpuFlags , '+x2apic' if !$nokvm && $conf->{ostype
} ne 'solaris';
2851 push @$cpuFlags , '-x2apic' if $conf->{ostype
} eq 'solaris';
2853 push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
2855 $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
2857 # Note: enforce needs kernel 3.10, so we do not use it for now
2858 # push @$cmd, '-cpu', "$cpu,enforce";
2859 push @$cmd, '-cpu', $cpu;
2861 my $memory = $conf->{memory
} || $defaults->{memory
};
2862 push @$cmd, '-m', $memory;
2864 if ($conf->{numa
}) {
2866 my $numa_totalmemory = undef;
2867 for (my $i = 0; $i < $MAX_NUMA; $i++) {
2868 next if !$conf->{"numa$i"};
2869 my $numa = parse_numa
($conf->{"numa$i"});
2872 die "missing numa node$i memory value\n" if !$numa->{memory
};
2873 my $numa_memory = $numa->{memory
};
2874 $numa_totalmemory += $numa_memory;
2875 my $numa_object = "memory-backend-ram,id=ram-node$i,size=$numa_memory"."M";
2878 my $cpus_start = $numa->{cpus
}->{start
};
2879 die "missing numa node$i cpus\n" if !defined($cpus_start);
2880 my $cpus_end = $numa->{cpus
}->{end
} if defined($numa->{cpus
}->{end
});
2881 my $cpus = $cpus_start;
2882 if (defined($cpus_end)) {
2883 $cpus .= "-$cpus_end";
2884 die "numa node$i : cpu range $cpus is incorrect\n" if $cpus_end <= $cpus_start;
2888 my $hostnodes_start = $numa->{hostnodes
}->{start
};
2889 if (defined($hostnodes_start)) {
2890 my $hostnodes_end = $numa->{hostnodes
}->{end
} if defined($numa->{hostnodes
}->{end
});
2891 my $hostnodes = $hostnodes_start;
2892 if (defined($hostnodes_end)) {
2893 $hostnodes .= "-$hostnodes_end";
2894 die "host node $hostnodes range is incorrect\n" if $hostnodes_end <= $hostnodes_start;
2897 my $hostnodes_end_range = defined($hostnodes_end) ?
$hostnodes_end : $hostnodes_start;
2898 for (my $i = $hostnodes_start; $i <= $hostnodes_end_range; $i++ ) {
2899 die "host numa node$i don't exist\n" if ! -d
"/sys/devices/system/node/node$i/";
2903 my $policy = $numa->{policy
};
2904 die "you need to define a policy for hostnode $hostnodes\n" if !$policy;
2905 $numa_object .= ",host-nodes=$hostnodes,policy=$policy";
2908 push @$cmd, '-object', $numa_object;
2909 push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=ram-node$i";
2912 die "total memory for NUMA nodes must be equal to vm memory\n"
2913 if $numa_totalmemory && $numa_totalmemory != $memory;
2915 #if no custom tology, we split memory and cores across numa nodes
2916 if(!$numa_totalmemory) {
2918 my $numa_memory = ($memory / $sockets) . "M";
2920 for (my $i = 0; $i < $sockets; $i++) {
2922 my $cpustart = ($cores * $i);
2923 my $cpuend = ($cpustart + $cores - 1) if $cores && $cores > 1;
2924 my $cpus = $cpustart;
2925 $cpus .= "-$cpuend" if $cpuend;
2927 push @$cmd, '-object', "memory-backend-ram,size=$numa_memory,id=ram-node$i";
2928 push @$cmd, '-numa', "node,nodeid=$i,cpus=$cpus,memdev=ram-node$i";
2933 push @$cmd, '-S' if $conf->{freeze
};
2935 # set keyboard layout
2936 my $kb = $conf->{keyboard
} || $defaults->{keyboard
};
2937 push @$cmd, '-k', $kb if $kb;
2940 #my $soundhw = $conf->{soundhw} || $defaults->{soundhw};
2941 #push @$cmd, '-soundhw', 'es1370';
2942 #push @$cmd, '-soundhw', $soundhw if $soundhw;
2944 if($conf->{agent
}) {
2945 my $qgasocket = qmp_socket
($vmid, 1);
2946 my $pciaddr = print_pci_addr
("qga0", $bridges);
2947 push @$devices, '-chardev', "socket,path=$qgasocket,server,nowait,id=qga0";
2948 push @$devices, '-device', "virtio-serial,id=qga0$pciaddr";
2949 push @$devices, '-device', 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0';
2956 if ($conf->{ostype
} && $conf->{ostype
} =~ m/^w/){
2957 for(my $i = 1; $i < $qxlnum; $i++){
2958 my $pciaddr = print_pci_addr
("vga$i", $bridges);
2959 push @$cmd, '-device', "qxl,id=vga$i,ram_size=67108864,vram_size=33554432$pciaddr";
2962 # assume other OS works like Linux
2963 push @$cmd, '-global', 'qxl-vga.ram_size=134217728';
2964 push @$cmd, '-global', 'qxl-vga.vram_size=67108864';
2968 my $pciaddr = print_pci_addr
("spice", $bridges);
2970 $spice_port = PVE
::Tools
::next_spice_port
();
2972 push @$devices, '-spice', "tls-port=${spice_port},addr=127.0.0.1,tls-ciphers=DES-CBC3-SHA,seamless-migration=on";
2974 push @$devices, '-device', "virtio-serial,id=spice$pciaddr";
2975 push @$devices, '-chardev', "spicevmc,id=vdagent,name=vdagent";
2976 push @$devices, '-device', "virtserialport,chardev=vdagent,name=com.redhat.spice.0";
2979 # enable balloon by default, unless explicitly disabled
2980 if (!defined($conf->{balloon
}) || $conf->{balloon
}) {
2981 $pciaddr = print_pci_addr
("balloon0", $bridges);
2982 push @$devices, '-device', "virtio-balloon-pci,id=balloon0$pciaddr";
2985 if ($conf->{watchdog
}) {
2986 my $wdopts = parse_watchdog
($conf->{watchdog
});
2987 $pciaddr = print_pci_addr
("watchdog", $bridges);
2988 my $watchdog = $wdopts->{model
} || 'i6300esb';
2989 push @$devices, '-device', "$watchdog$pciaddr";
2990 push @$devices, '-watchdog-action', $wdopts->{action
} if $wdopts->{action
};
2994 my $scsicontroller = {};
2995 my $ahcicontroller = {};
2996 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : $defaults->{scsihw
};
2998 # Add iscsi initiator name if available
2999 if (my $initiator = get_initiator_name
()) {
3000 push @$devices, '-iscsi', "initiator-name=$initiator";
3003 foreach_drive
($conf, sub {
3004 my ($ds, $drive) = @_;
3006 if (PVE
::Storage
::parse_volume_id
($drive->{file
}, 1)) {
3007 push @$vollist, $drive->{file
};
3010 $use_virtio = 1 if $ds =~ m/^virtio/;
3012 if (drive_is_cdrom
($drive)) {
3013 if ($bootindex_hash->{d
}) {
3014 $drive->{bootindex
} = $bootindex_hash->{d
};
3015 $bootindex_hash->{d
} += 1;
3018 if ($bootindex_hash->{c
}) {
3019 $drive->{bootindex
} = $bootindex_hash->{c
} if $conf->{bootdisk
} && ($conf->{bootdisk
} eq $ds);
3020 $bootindex_hash->{c
} += 1;
3024 if ($drive->{interface
} eq 'scsi') {
3026 my $maxdev = ($scsihw !~ m/^lsi/) ?
256 : 7;
3027 my $controller = int($drive->{index} / $maxdev);
3028 $pciaddr = print_pci_addr
("scsihw$controller", $bridges);
3029 push @$devices, '-device', "$scsihw,id=scsihw$controller$pciaddr" if !$scsicontroller->{$controller};
3030 $scsicontroller->{$controller}=1;
3033 if ($drive->{interface
} eq 'sata') {
3034 my $controller = int($drive->{index} / $MAX_SATA_DISKS);
3035 $pciaddr = print_pci_addr
("ahci$controller", $bridges);
3036 push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
3037 $ahcicontroller->{$controller}=1;
3040 my $drive_cmd = print_drive_full
($storecfg, $vmid, $drive);
3041 push @$devices, '-drive',$drive_cmd;
3042 push @$devices, '-device', print_drivedevice_full
($storecfg, $conf, $vmid, $drive, $bridges);
3045 for (my $i = 0; $i < $MAX_NETS; $i++) {
3046 next if !$conf->{"net$i"};
3047 my $d = parse_net
($conf->{"net$i"});
3050 $use_virtio = 1 if $d->{model
} eq 'virtio';
3052 if ($bootindex_hash->{n
}) {
3053 $d->{bootindex
} = $bootindex_hash->{n
};
3054 $bootindex_hash->{n
} += 1;
3057 my $netdevfull = print_netdev_full
($vmid,$conf,$d,"net$i");
3058 push @$devices, '-netdev', $netdevfull;
3060 my $netdevicefull = print_netdevice_full
($vmid,$conf,$d,"net$i",$bridges);
3061 push @$devices, '-device', $netdevicefull;
3066 while (my ($k, $v) = each %$bridges) {
3067 $pciaddr = print_pci_addr
("pci.$k");
3068 unshift @$devices, '-device', "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
3072 # hack: virtio with fairsched is unreliable, so we do not use fairsched
3073 # when the VM uses virtio devices.
3074 if (!$use_virtio && $have_ovz) {
3076 my $cpuunits = defined($conf->{cpuunits
}) ?
3077 $conf->{cpuunits
} : $defaults->{cpuunits
};
3079 push @$cmd, '-cpuunits', $cpuunits if $cpuunits;
3081 # fixme: cpulimit is currently ignored
3082 #push @$cmd, '-cpulimit', $conf->{cpulimit} if $conf->{cpulimit};
3086 if ($conf->{args
}) {
3087 my $aa = PVE
::Tools
::split_args
($conf->{args
});
3091 push @$cmd, @$devices;
3092 push @$cmd, '-rtc', join(',', @$rtcFlags)
3093 if scalar(@$rtcFlags);
3094 push @$cmd, '-machine', join(',', @$machineFlags)
3095 if scalar(@$machineFlags);
3096 push @$cmd, '-global', join(',', @$globalFlags)
3097 if scalar(@$globalFlags);
3099 return wantarray ?
($cmd, $vollist, $spice_port) : $cmd;
3104 return "${var_run_tmpdir}/$vmid.vnc";
3110 my $res = vm_mon_cmd
($vmid, 'query-spice');
3112 return $res->{'tls-port'} || $res->{'port'} || die "no spice port\n";
3116 my ($vmid, $qga) = @_;
3117 my $sockettype = $qga ?
'qga' : 'qmp';
3118 return "${var_run_tmpdir}/$vmid.$sockettype";
3123 return "${var_run_tmpdir}/$vmid.pid";
3126 sub vm_devices_list
{
3129 my $res = vm_mon_cmd
($vmid, 'query-pci');
3131 foreach my $pcibus (@$res) {
3132 foreach my $device (@{$pcibus->{devices
}}) {
3133 next if !$device->{'qdev_id'};
3134 $devices->{$device->{'qdev_id'}} = 1;
3138 my $resblock = vm_mon_cmd
($vmid, 'query-block');
3139 foreach my $block (@$resblock) {
3140 if($block->{device
} =~ m/^drive-(\S+)/){
3145 my $resmice = vm_mon_cmd
($vmid, 'query-mice');
3146 foreach my $mice (@$resmice) {
3147 if ($mice->{name
} eq 'QEMU HID Tablet') {
3148 $devices->{tablet
} = 1;
3157 my ($storecfg, $conf, $vmid, $deviceid, $device) = @_;
3159 die "internal error" if !$conf->{hotplug
};
3161 my $q35 = machine_type_is_q35
($conf);
3163 my $devices_list = vm_devices_list
($vmid);
3164 return 1 if defined($devices_list->{$deviceid});
3166 qemu_add_pci_bridge
($storecfg, $conf, $vmid, $deviceid); # add PCI bridge if we need it for the device
3168 if ($deviceid eq 'tablet') {
3170 qemu_deviceadd
($vmid, print_tabletdevice_full
($conf));
3172 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
3174 qemu_driveadd
($storecfg, $vmid, $device);
3175 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device);
3177 qemu_deviceadd
($vmid, $devicefull);
3178 eval { qemu_deviceaddverify
($vmid, $deviceid); };
3180 eval { qemu_drivedel
($vmid, $deviceid); };
3185 } elsif ($deviceid =~ m/^(scsihw)(\d+)$/) {
3187 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : "lsi";
3188 my $pciaddr = print_pci_addr
($deviceid);
3189 my $devicefull = "$scsihw,id=$deviceid$pciaddr";
3191 qemu_deviceadd
($vmid, $devicefull);
3192 qemu_deviceaddverify
($vmid, $deviceid);
3194 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
3196 qemu_findorcreatescsihw
($storecfg,$conf, $vmid, $device);
3197 qemu_driveadd
($storecfg, $vmid, $device);
3199 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device);
3200 eval { qemu_deviceadd
($vmid, $devicefull); };
3202 eval { qemu_drivedel
($vmid, $deviceid); };
3207 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
3209 return undef if !qemu_netdevadd
($vmid, $conf, $device, $deviceid);
3210 my $netdevicefull = print_netdevice_full
($vmid, $conf, $device, $deviceid);
3211 qemu_deviceadd
($vmid, $netdevicefull);
3212 eval { qemu_deviceaddverify
($vmid, $deviceid); };
3214 eval { qemu_netdevdel
($vmid, $deviceid); };
3219 } elsif (!$q35 && $deviceid =~ m/^(pci\.)(\d+)$/) {
3222 my $pciaddr = print_pci_addr
($deviceid);
3223 my $devicefull = "pci-bridge,id=pci.$bridgeid,chassis_nr=$bridgeid$pciaddr";
3225 qemu_deviceadd
($vmid, $devicefull);
3226 qemu_deviceaddverify
($vmid, $deviceid);
3229 die "can't hotplug device '$deviceid'\n";
3235 # fixme: this should raise exceptions on error!
3236 sub vm_deviceunplug
{
3237 my ($vmid, $conf, $deviceid) = @_;
3239 die "internal error" if !$conf->{hotplug
};
3241 my $devices_list = vm_devices_list
($vmid);
3242 return 1 if !defined($devices_list->{$deviceid});
3244 die "can't unplug bootdisk" if $conf->{bootdisk
} && $conf->{bootdisk
} eq $deviceid;
3246 if ($deviceid eq 'tablet') {
3248 qemu_devicedel
($vmid, $deviceid);
3250 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
3252 qemu_devicedel
($vmid, $deviceid);
3253 qemu_devicedelverify
($vmid, $deviceid);
3254 qemu_drivedel
($vmid, $deviceid);
3256 } elsif ($deviceid =~ m/^(lsi)(\d+)$/) {
3258 qemu_devicedel
($vmid, $deviceid);
3260 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
3262 qemu_devicedel
($vmid, $deviceid);
3263 qemu_drivedel
($vmid, $deviceid);
3265 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
3267 qemu_devicedel
($vmid, $deviceid);
3268 qemu_devicedelverify
($vmid, $deviceid);
3269 qemu_netdevdel
($vmid, $deviceid);
3272 die "can't unplug device '$deviceid'\n";
3278 sub qemu_deviceadd
{
3279 my ($vmid, $devicefull) = @_;
3281 $devicefull = "driver=".$devicefull;
3282 my %options = split(/[=,]/, $devicefull);
3284 vm_mon_cmd
($vmid, "device_add" , %options);
3287 sub qemu_devicedel
{
3288 my ($vmid, $deviceid) = @_;
3290 my $ret = vm_mon_cmd
($vmid, "device_del", id
=> $deviceid);
3294 my ($storecfg, $vmid, $device) = @_;
3296 my $drive = print_drive_full
($storecfg, $vmid, $device);
3297 my $ret = vm_human_monitor_command
($vmid, "drive_add auto $drive");
3299 # If the command succeeds qemu prints: "OK"
3300 return 1 if $ret =~ m/OK/s;
3302 die "adding drive failed: $ret\n";
3306 my($vmid, $deviceid) = @_;
3308 my $ret = vm_human_monitor_command
($vmid, "drive_del drive-$deviceid");
3311 return 1 if $ret eq "";
3313 # NB: device not found errors mean the drive was auto-deleted and we ignore the error
3314 return 1 if $ret =~ m/Device \'.*?\' not found/s;
3316 die "deleting drive $deviceid failed : $ret\n";
3319 sub qemu_deviceaddverify
{
3320 my ($vmid, $deviceid) = @_;
3322 for (my $i = 0; $i <= 5; $i++) {
3323 my $devices_list = vm_devices_list
($vmid);
3324 return 1 if defined($devices_list->{$deviceid});
3328 die "error on hotplug device '$deviceid'\n";
3332 sub qemu_devicedelverify
{
3333 my ($vmid, $deviceid) = @_;
3335 # need to verify that the device is correctly removed as device_del
3336 # is async and empty return is not reliable
3338 for (my $i = 0; $i <= 5; $i++) {
3339 my $devices_list = vm_devices_list
($vmid);
3340 return 1 if !defined($devices_list->{$deviceid});
3344 die "error on hot-unplugging device '$deviceid'\n";
3347 sub qemu_findorcreatescsihw
{
3348 my ($storecfg, $conf, $vmid, $device) = @_;
3350 my $maxdev = ($conf->{scsihw
} && ($conf->{scsihw
} !~ m/^lsi/)) ?
256 : 7;
3351 my $controller = int($device->{index} / $maxdev);
3352 my $scsihwid="scsihw$controller";
3353 my $devices_list = vm_devices_list
($vmid);
3355 if(!defined($devices_list->{$scsihwid})) {
3356 vm_deviceplug
($storecfg, $conf, $vmid, $scsihwid);
3362 sub qemu_add_pci_bridge
{
3363 my ($storecfg, $conf, $vmid, $device) = @_;
3369 print_pci_addr
($device, $bridges);
3371 while (my ($k, $v) = each %$bridges) {
3374 return 1 if !defined($bridgeid) || $bridgeid < 1;
3376 my $bridge = "pci.$bridgeid";
3377 my $devices_list = vm_devices_list
($vmid);
3379 if (!defined($devices_list->{$bridge})) {
3380 vm_deviceplug
($storecfg, $conf, $vmid, $bridge);
3386 sub qemu_netdevadd
{
3387 my ($vmid, $conf, $device, $deviceid) = @_;
3389 my $netdev = print_netdev_full
($vmid, $conf, $device, $deviceid);
3390 my %options = split(/[=,]/, $netdev);
3392 vm_mon_cmd
($vmid, "netdev_add", %options);
3396 sub qemu_netdevdel
{
3397 my ($vmid, $deviceid) = @_;
3399 vm_mon_cmd
($vmid, "netdev_del", id
=> $deviceid);
3402 sub qemu_cpu_hotplug
{
3403 my ($vmid, $conf, $cores) = @_;
3405 my $sockets = $conf->{sockets
} || 1;
3406 die "cpu hotplug only works with one socket\n"
3409 die "maxcpus is not defined\n"
3410 if !$conf->{maxcpus
};
3412 die "you can't add more cores than maxcpus\n"
3413 if $cores > $conf->{maxcpus
};
3415 my $currentcores = $conf->{cores
} || 1;
3416 die "online cpu unplug is not yet possible\n"
3417 if $cores < $currentcores;
3419 my $currentrunningcores = vm_mon_cmd
($vmid, "query-cpus");
3420 die "cores number if running vm is different than configuration\n"
3421 if scalar(@{$currentrunningcores}) != $currentcores;
3423 for (my $i = $currentcores; $i < $cores; $i++) {
3424 vm_mon_cmd
($vmid, "cpu-add", id
=> int($i));
3428 sub qemu_block_set_io_throttle
{
3429 my ($vmid, $deviceid, $bps, $bps_rd, $bps_wr, $iops, $iops_rd, $iops_wr) = @_;
3431 return if !check_running
($vmid) ;
3433 vm_mon_cmd
($vmid, "block_set_io_throttle", device
=> $deviceid, bps
=> int($bps), bps_rd
=> int($bps_rd), bps_wr
=> int($bps_wr), iops
=> int($iops), iops_rd
=> int($iops_rd), iops_wr
=> int($iops_wr));
3437 # old code, only used to shutdown old VM after update
3439 my ($fh, $timeout) = @_;
3441 my $sel = new IO
::Select
;
3448 while (scalar (@ready = $sel->can_read($timeout))) {
3450 if ($count = $fh->sysread($buf, 8192)) {
3451 if ($buf =~ /^(.*)\(qemu\) $/s) {
3458 if (!defined($count)) {
3465 die "monitor read timeout\n" if !scalar(@ready);
3470 # old code, only used to shutdown old VM after update
3471 sub vm_monitor_command
{
3472 my ($vmid, $cmdstr, $nocheck) = @_;
3477 die "VM $vmid not running\n" if !check_running
($vmid, $nocheck);
3479 my $sname = "${var_run_tmpdir}/$vmid.mon";
3481 my $sock = IO
::Socket
::UNIX-
>new( Peer
=> $sname ) ||
3482 die "unable to connect to VM $vmid socket - $!\n";
3486 # hack: migrate sometime blocks the monitor (when migrate_downtime
3488 if ($cmdstr =~ m/^(info\s+migrate|migrate\s)/) {
3489 $timeout = 60*60; # 1 hour
3493 my $data = __read_avail
($sock, $timeout);
3495 if ($data !~ m/^QEMU\s+(\S+)\s+monitor\s/) {
3496 die "got unexpected qemu monitor banner\n";
3499 my $sel = new IO
::Select
;
3502 if (!scalar(my @ready = $sel->can_write($timeout))) {
3503 die "monitor write error - timeout";
3506 my $fullcmd = "$cmdstr\r";
3508 # syslog('info', "VM $vmid monitor command: $cmdstr");
3511 if (!($b = $sock->syswrite($fullcmd)) || ($b != length($fullcmd))) {
3512 die "monitor write error - $!";
3515 return if ($cmdstr eq 'q') || ($cmdstr eq 'quit');
3519 if ($cmdstr =~ m/^(info\s+migrate|migrate\s)/) {
3520 $timeout = 60*60; # 1 hour
3521 } elsif ($cmdstr =~ m/^(eject|change)/) {
3522 $timeout = 60; # note: cdrom mount command is slow
3524 if ($res = __read_avail
($sock, $timeout)) {
3526 my @lines = split("\r?\n", $res);
3528 shift @lines if $lines[0] !~ m/^unknown command/; # skip echo
3530 $res = join("\n", @lines);
3538 syslog
("err", "VM $vmid monitor command failed - $err");
3545 sub qemu_block_resize
{
3546 my ($vmid, $deviceid, $storecfg, $volid, $size) = @_;
3548 my $running = check_running
($vmid);
3550 return if !PVE
::Storage
::volume_resize
($storecfg, $volid, $size, $running);
3552 return if !$running;
3554 vm_mon_cmd
($vmid, "block_resize", device
=> $deviceid, size
=> int($size));
3558 sub qemu_volume_snapshot
{
3559 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
3561 my $running = check_running
($vmid);
3563 return if !PVE
::Storage
::volume_snapshot
($storecfg, $volid, $snap, $running);
3565 return if !$running;
3567 vm_mon_cmd
($vmid, "snapshot-drive", device
=> $deviceid, name
=> $snap);
3571 sub qemu_volume_snapshot_delete
{
3572 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
3574 my $running = check_running
($vmid);
3576 return if !PVE
::Storage
::volume_snapshot_delete
($storecfg, $volid, $snap, $running);
3578 return if !$running;
3580 vm_mon_cmd
($vmid, "delete-drive-snapshot", device
=> $deviceid, name
=> $snap);
3583 sub set_migration_caps
{
3589 "auto-converge" => 1,
3591 "x-rdma-pin-all" => 0,
3595 my $supported_capabilities = vm_mon_cmd_nocheck
($vmid, "query-migrate-capabilities");
3597 for my $supported_capability (@$supported_capabilities) {
3599 capability
=> $supported_capability->{capability
},
3600 state => $enabled_cap->{$supported_capability->{capability
}} ? JSON
::true
: JSON
::false
,
3604 vm_mon_cmd_nocheck
($vmid, "migrate-set-capabilities", capabilities
=> $cap_ref);
3607 # hotplug changes in [PENDING]
3608 # $selection hash can be used to only apply specified options, for
3609 # example: { cores => 1 } (only apply changed 'cores')
3610 # $errors ref is used to return error messages
3611 sub vmconfig_hotplug_pending
{
3612 my ($vmid, $conf, $storecfg, $selection, $errors) = @_;
3614 my $defaults = load_defaults
();
3616 # commit values which do not have any impact on running VM first
3617 # Note: those option cannot raise errors, we we do not care about
3618 # $selection and always apply them.
3620 my $add_error = sub {
3621 my ($opt, $msg) = @_;
3622 $errors->{$opt} = "hotplug problem - $msg";
3626 foreach my $opt (keys %{$conf->{pending
}}) { # add/change
3627 if ($opt eq 'name' || $opt eq 'hotplug' || $opt eq 'onboot' || $opt eq 'shares') {
3628 $conf->{$opt} = $conf->{pending
}->{$opt};
3629 delete $conf->{pending
}->{$opt};
3635 update_config_nolock
($vmid, $conf, 1);
3636 $conf = load_config
($vmid); # update/reload
3639 my $hotplug = defined($conf->{hotplug
}) ?
$conf->{hotplug
} : $defaults->{hotplug
};
3641 my @delete = PVE
::Tools
::split_list
($conf->{pending
}->{delete});
3642 foreach my $opt (@delete) {
3643 next if $selection && !$selection->{$opt};
3645 if ($opt eq 'tablet') {
3646 die "skip\n" if !$hotplug;
3647 if ($defaults->{tablet
}) {
3648 vm_deviceplug
($storecfg, $conf, $vmid, $opt);
3650 vm_deviceunplug
($vmid, $conf, $opt);
3652 } elsif ($opt eq 'cores') {
3653 die "skip\n" if !$hotplug;
3654 qemu_cpu_hotplug
($vmid, $conf, 1);
3655 } elsif ($opt eq 'balloon') {
3656 #enable balloon device is not hotpluggable
3657 die "skip\n" if ((defined($conf->{balloon
})) && ($conf->{balloon
} == 0));
3658 } elsif ($opt eq 'shares') {
3659 } elsif ($opt =~ m/^net(\d+)$/) {
3660 die "skip\n" if !$hotplug;
3661 vm_deviceunplug
($vmid, $conf, $opt);
3662 } elsif (valid_drivename
($opt)) {
3663 die "skip\n" if !$hotplug || $opt =~ m/(ide|sata)(\d+)/;
3664 vm_deviceunplug
($vmid, $conf, $opt);
3665 vmconfig_register_unused_drive
($storecfg, $vmid, $conf, parse_drive
($opt, $conf->{$opt}));
3671 &$add_error($opt, $err) if $err ne "skip\n";
3673 # save new config if hotplug was successful
3674 delete $conf->{$opt};
3675 vmconfig_undelete_pending_option
($conf, $opt);
3676 update_config_nolock
($vmid, $conf, 1);
3677 $conf = load_config
($vmid); # update/reload
3681 foreach my $opt (keys %{$conf->{pending
}}) {
3682 next if $selection && !$selection->{$opt};
3683 my $value = $conf->{pending
}->{$opt};
3685 if ($opt eq 'tablet') {
3686 die "skip\n" if !$hotplug;
3688 vm_deviceplug
($storecfg, $conf, $vmid, $opt);
3689 } elsif ($value == 0) {
3690 vm_deviceunplug
($vmid, $conf, $opt);
3692 } elsif ($opt eq 'cores') {
3693 die "skip\n" if !$hotplug;
3694 qemu_cpu_hotplug
($vmid, $conf, $value);
3695 } elsif ($opt eq 'balloon') {
3696 # disable balloning device is not hotpluggable
3697 die "skip\n" if ((defined($conf->{pending
}->{balloon
})) && ($conf->{pending
}->{balloon
} == 0));
3698 # enable balloning device is not hotpluggable
3699 die "skip\n" if ((defined($conf->{balloon
})) && ($conf->{balloon
} == 0));
3700 # allow manual ballooning if shares is set to zero
3701 if (!(defined($conf->{shares
}) && ($conf->{shares
} == 0))) {
3702 my $balloon = $conf->{pending
}->{balloon
} || $conf->{memory
} || $defaults->{memory
};
3703 vm_mon_cmd
($vmid, "balloon", value
=> $balloon*1024*1024);
3705 } elsif ($opt =~ m/^net(\d+)$/) {
3706 # some changes can be done without hotplug
3707 vmconfig_update_net
($storecfg, $conf, $vmid, $opt, $value);
3708 } elsif (valid_drivename
($opt)) {
3709 # some changes can be done without hotplug
3710 vmconfig_update_disk
($storecfg, $conf, $vmid, $opt, $value, 1);
3712 die "skip\n"; # skip non-hot-pluggable options
3716 &$add_error($opt, $err) if $err ne "skip\n";
3718 # save new config if hotplug was successful
3719 $conf->{$opt} = $value;
3720 delete $conf->{pending
}->{$opt};
3721 update_config_nolock
($vmid, $conf, 1);
3722 $conf = load_config
($vmid); # update/reload
3727 sub vmconfig_apply_pending
{
3728 my ($vmid, $conf, $storecfg) = @_;
3732 my @delete = PVE
::Tools
::split_list
($conf->{pending
}->{delete});
3733 foreach my $opt (@delete) { # delete
3734 die "internal error" if $opt =~ m/^unused/;
3735 $conf = load_config
($vmid); # update/reload
3736 if (!defined($conf->{$opt})) {
3737 vmconfig_undelete_pending_option
($conf, $opt);
3738 update_config_nolock
($vmid, $conf, 1);
3739 } elsif (valid_drivename
($opt)) {
3740 vmconfig_register_unused_drive
($storecfg, $vmid, $conf, parse_drive
($opt, $conf->{$opt}));
3741 vmconfig_undelete_pending_option
($conf, $opt);
3742 delete $conf->{$opt};
3743 update_config_nolock
($vmid, $conf, 1);
3745 vmconfig_undelete_pending_option
($conf, $opt);
3746 delete $conf->{$opt};
3747 update_config_nolock
($vmid, $conf, 1);
3751 $conf = load_config
($vmid); # update/reload
3753 foreach my $opt (keys %{$conf->{pending
}}) { # add/change
3754 $conf = load_config
($vmid); # update/reload
3756 if (defined($conf->{$opt}) && ($conf->{$opt} eq $conf->{pending
}->{$opt})) {
3757 # skip if nothing changed
3758 } elsif (valid_drivename
($opt)) {
3759 vmconfig_register_unused_drive
($storecfg, $vmid, $conf, parse_drive
($opt, $conf->{$opt}))
3760 if defined($conf->{$opt});
3761 $conf->{$opt} = $conf->{pending
}->{$opt};
3763 $conf->{$opt} = $conf->{pending
}->{$opt};
3766 delete $conf->{pending
}->{$opt};
3767 update_config_nolock
($vmid, $conf, 1);
3771 my $safe_num_ne = sub {
3774 return 0 if !defined($a) && !defined($b);
3775 return 1 if !defined($a);
3776 return 1 if !defined($b);
3781 my $safe_string_ne = sub {
3784 return 0 if !defined($a) && !defined($b);
3785 return 1 if !defined($a);
3786 return 1 if !defined($b);
3791 sub vmconfig_update_net
{
3792 my ($storecfg, $conf, $vmid, $opt, $value) = @_;
3794 my $newnet = parse_net
($value);
3796 if ($conf->{$opt}) {
3797 my $oldnet = parse_net
($conf->{$opt});
3799 if (&$safe_string_ne($oldnet->{model
}, $newnet->{model
}) ||
3800 &$safe_string_ne($oldnet->{macaddr
}, $newnet->{macaddr
}) ||
3801 &$safe_num_ne($oldnet->{queues
}, $newnet->{queues
}) ||
3802 !($newnet->{bridge
} && $oldnet->{bridge
})) { # bridge/nat mode change
3804 # for non online change, we try to hot-unplug
3805 die "skip\n" if !$conf->{hotplug
};
3806 vm_deviceunplug
($vmid, $conf, $opt);
3809 die "internal error" if $opt !~ m/net(\d+)/;
3810 my $iface = "tap${vmid}i$1";
3812 if (&$safe_num_ne($oldnet->{rate
}, $newnet->{rate
})) {
3813 PVE
::Network
::tap_rate_limit
($iface, $newnet->{rate
});
3816 if(&$safe_string_ne($oldnet->{bridge
}, $newnet->{bridge
}) ||
3817 &$safe_num_ne($oldnet->{tag
}, $newnet->{tag
}) ||
3818 &$safe_num_ne($oldnet->{firewall
}, $newnet->{firewall
})) {
3819 PVE
::Network
::tap_unplug
($iface);
3820 PVE
::Network
::tap_plug
($iface, $newnet->{bridge
}, $newnet->{tag
}, $newnet->{firewall
});
3827 if ($conf->{hotplug
}) {
3828 vm_deviceplug
($storecfg, $conf, $vmid, $opt, $newnet);
3834 sub vmconfig_update_disk
{
3835 my ($storecfg, $conf, $vmid, $opt, $value, $force) = @_;
3837 # fixme: do we need force?
3839 my $drive = parse_drive
($opt, $value);
3841 if ($conf->{$opt}) {
3843 if (my $old_drive = parse_drive
($opt, $conf->{$opt})) {
3845 my $media = $drive->{media
} || 'disk';
3846 my $oldmedia = $old_drive->{media
} || 'disk';
3847 die "unable to change media type\n" if $media ne $oldmedia;
3849 if (!drive_is_cdrom
($old_drive)) {
3851 if ($drive->{file
} ne $old_drive->{file
}) {
3853 die "skip\n" if !$conf->{hotplug
};
3855 # unplug and register as unused
3856 vm_deviceunplug
($vmid, $conf, $opt);
3857 vmconfig_register_unused_drive
($storecfg, $vmid, $conf, $old_drive)
3860 # update existing disk
3862 # skip non hotpluggable value
3863 if (&$safe_num_ne($drive->{discard
}, $old_drive->{discard
}) ||
3864 &$safe_string_ne($drive->{cache
}, $old_drive->{cache
})) {
3869 if (&$safe_num_ne($drive->{mbps
}, $old_drive->{mbps
}) ||
3870 &$safe_num_ne($drive->{mbps_rd
}, $old_drive->{mbps_rd
}) ||
3871 &$safe_num_ne($drive->{mbps_wr
}, $old_drive->{mbps_wr
}) ||
3872 &$safe_num_ne($drive->{iops
}, $old_drive->{iops
}) ||
3873 &$safe_num_ne($drive->{iops_rd
}, $old_drive->{iops_rd
}) ||
3874 &$safe_num_ne($drive->{iops_wr
}, $old_drive->{iops_wr
}) ||
3875 &$safe_num_ne($drive->{mbps_max
}, $old_drive->{mbps_max
}) ||
3876 &$safe_num_ne($drive->{mbps_rd_max
}, $old_drive->{mbps_rd_max
}) ||
3877 &$safe_num_ne($drive->{mbps_wr_max
}, $old_drive->{mbps_wr_max
}) ||
3878 &$safe_num_ne($drive->{iops_max
}, $old_drive->{iops_max
}) ||
3879 &$safe_num_ne($drive->{iops_rd_max
}, $old_drive->{iops_rd_max
}) ||
3880 &$safe_num_ne($drive->{iops_wr_max
}, $old_drive->{iops_wr_max
})) {
3882 qemu_block_set_io_throttle
($vmid,"drive-$opt",
3883 ($drive->{mbps
} || 0)*1024*1024,
3884 ($drive->{mbps_rd
} || 0)*1024*1024,
3885 ($drive->{mbps_wr
} || 0)*1024*1024,
3886 $drive->{iops
} || 0,
3887 $drive->{iops_rd
} || 0,
3888 $drive->{iops_wr
} || 0,
3889 ($drive->{mbps_max
} || 0)*1024*1024,
3890 ($drive->{mbps_rd_max
} || 0)*1024*1024,
3891 ($drive->{mbps_wr_max
} || 0)*1024*1024,
3892 $drive->{iops_max
} || 0,
3893 $drive->{iops_rd_max
} || 0,
3894 $drive->{iops_wr_max
} || 0);
3904 if (drive_is_cdrom
($drive)) { # cdrom
3906 if ($drive->{file
} eq 'none') {
3907 vm_mon_cmd
($vmid, "eject",force
=> JSON
::true
,device
=> "drive-$opt");
3909 my $path = get_iso_path
($storecfg, $vmid, $drive->{file
});
3910 vm_mon_cmd
($vmid, "eject", force
=> JSON
::true
,device
=> "drive-$opt"); # force eject if locked
3911 vm_mon_cmd
($vmid, "change", device
=> "drive-$opt",target
=> "$path") if $path;
3915 die "skip\n" if !$conf->{hotplug
} || $opt =~ m/(ide|sata)(\d+)/;
3917 vm_deviceplug
($storecfg, $conf, $vmid, $opt, $drive);
3922 my ($storecfg, $vmid, $statefile, $skiplock, $migratedfrom, $paused, $forcemachine, $spice_ticket) = @_;
3924 lock_config
($vmid, sub {
3925 my $conf = load_config
($vmid, $migratedfrom);
3927 die "you can't start a vm if it's a template\n" if is_template
($conf);
3929 check_lock
($conf) if !$skiplock;
3931 die "VM $vmid already running\n" if check_running
($vmid, undef, $migratedfrom);
3933 if (!$statefile && scalar(keys %{$conf->{pending
}})) {
3934 vmconfig_apply_pending
($vmid, $conf, $storecfg);
3935 $conf = load_config
($vmid); # update/reload
3938 my $defaults = load_defaults
();
3940 # set environment variable useful inside network script
3941 $ENV{PVE_MIGRATED_FROM
} = $migratedfrom if $migratedfrom;
3943 my ($cmd, $vollist, $spice_port) = config_to_command
($storecfg, $vmid, $conf, $defaults, $forcemachine);
3945 my $migrate_port = 0;
3948 if ($statefile eq 'tcp') {
3949 my $localip = "localhost";
3950 my $datacenterconf = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
3951 if ($datacenterconf->{migration_unsecure
}) {
3952 my $nodename = PVE
::INotify
::nodename
();
3953 $localip = PVE
::Cluster
::remote_node_ip
($nodename, 1);
3955 $migrate_port = PVE
::Tools
::next_migrate_port
();
3956 $migrate_uri = "tcp:${localip}:${migrate_port}";
3957 push @$cmd, '-incoming', $migrate_uri;
3960 push @$cmd, '-loadstate', $statefile;
3967 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
3968 my $d = parse_hostpci
($conf->{"hostpci$i"});
3970 my $pcidevices = $d->{pciid
};
3971 foreach my $pcidevice (@$pcidevices) {
3972 my $pciid = $pcidevice->{id
}.".".$pcidevice->{function
};
3974 my $info = pci_device_info
("0000:$pciid");
3975 die "IOMMU not present\n" if !check_iommu_support
();
3976 die "no pci device info for device '$pciid'\n" if !$info;
3978 if ($d->{driver
} && $d->{driver
} eq "vfio") {
3979 die "can't unbind/bind pci group to vfio '$pciid'\n" if !pci_dev_group_bind_to_vfio
($pciid);
3981 die "can't unbind/bind to stub pci device '$pciid'\n" if !pci_dev_bind_to_stub
($info);
3984 die "can't reset pci device '$pciid'\n" if $info->{has_fl_reset
} and !pci_dev_reset
($info);
3988 PVE
::Storage
::activate_volumes
($storecfg, $vollist);
3990 eval { run_command
($cmd, timeout
=> $statefile ?
undef : 30,
3993 die "start failed: $err" if $err;
3995 print "migration listens on $migrate_uri\n" if $migrate_uri;
3997 if ($statefile && $statefile ne 'tcp') {
3998 eval { vm_mon_cmd_nocheck
($vmid, "cont"); };
4002 if ($migratedfrom) {
4005 set_migration_caps
($vmid);
4010 print "spice listens on port $spice_port\n";
4011 if ($spice_ticket) {
4012 vm_mon_cmd_nocheck
($vmid, "set_password", protocol
=> 'spice', password
=> $spice_ticket);
4013 vm_mon_cmd_nocheck
($vmid, "expire_password", protocol
=> 'spice', time => "+30");
4019 if (!$statefile && (!defined($conf->{balloon
}) || $conf->{balloon
})) {
4020 vm_mon_cmd_nocheck
($vmid, "balloon", value
=> $conf->{balloon
}*1024*1024)
4021 if $conf->{balloon
};
4022 vm_mon_cmd_nocheck
($vmid, 'qom-set',
4023 path
=> "machine/peripheral/balloon0",
4024 property
=> "guest-stats-polling-interval",
4032 my ($vmid, $execute, %params) = @_;
4034 my $cmd = { execute
=> $execute, arguments
=> \
%params };
4035 vm_qmp_command
($vmid, $cmd);
4038 sub vm_mon_cmd_nocheck
{
4039 my ($vmid, $execute, %params) = @_;
4041 my $cmd = { execute
=> $execute, arguments
=> \
%params };
4042 vm_qmp_command
($vmid, $cmd, 1);
4045 sub vm_qmp_command
{
4046 my ($vmid, $cmd, $nocheck) = @_;
4051 if ($cmd->{arguments
} && $cmd->{arguments
}->{timeout
}) {
4052 $timeout = $cmd->{arguments
}->{timeout
};
4053 delete $cmd->{arguments
}->{timeout
};
4057 die "VM $vmid not running\n" if !check_running
($vmid, $nocheck);
4058 my $sname = qmp_socket
($vmid);
4059 if (-e
$sname) { # test if VM is reasonambe new and supports qmp/qga
4060 my $qmpclient = PVE
::QMPClient-
>new();
4062 $res = $qmpclient->cmd($vmid, $cmd, $timeout);
4063 } elsif (-e
"${var_run_tmpdir}/$vmid.mon") {
4064 die "can't execute complex command on old monitor - stop/start your vm to fix the problem\n"
4065 if scalar(%{$cmd->{arguments
}});
4066 vm_monitor_command
($vmid, $cmd->{execute
}, $nocheck);
4068 die "unable to open monitor socket\n";
4072 syslog
("err", "VM $vmid qmp command failed - $err");
4079 sub vm_human_monitor_command
{
4080 my ($vmid, $cmdline) = @_;
4085 execute
=> 'human-monitor-command',
4086 arguments
=> { 'command-line' => $cmdline},
4089 return vm_qmp_command
($vmid, $cmd);
4092 sub vm_commandline
{
4093 my ($storecfg, $vmid) = @_;
4095 my $conf = load_config
($vmid);
4097 my $defaults = load_defaults
();
4099 my $cmd = config_to_command
($storecfg, $vmid, $conf, $defaults);
4101 return join(' ', @$cmd);
4105 my ($vmid, $skiplock) = @_;
4107 lock_config
($vmid, sub {
4109 my $conf = load_config
($vmid);
4111 check_lock
($conf) if !$skiplock;
4113 vm_mon_cmd
($vmid, "system_reset");
4117 sub get_vm_volumes
{
4121 foreach_volid
($conf, sub {
4122 my ($volid, $is_cdrom) = @_;
4124 return if $volid =~ m
|^/|;
4126 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
4129 push @$vollist, $volid;
4135 sub vm_stop_cleanup
{
4136 my ($storecfg, $vmid, $conf, $keepActive) = @_;
4139 fairsched_rmnod
($vmid); # try to destroy group
4142 my $vollist = get_vm_volumes
($conf);
4143 PVE
::Storage
::deactivate_volumes
($storecfg, $vollist);
4146 foreach my $ext (qw(mon qmp pid vnc qga)) {
4147 unlink "/var/run/qemu-server/${vmid}.$ext";
4150 warn $@ if $@; # avoid errors - just warn
4153 # Note: use $nockeck to skip tests if VM configuration file exists.
4154 # We need that when migration VMs to other nodes (files already moved)
4155 # Note: we set $keepActive in vzdump stop mode - volumes need to stay active
4157 my ($storecfg, $vmid, $skiplock, $nocheck, $timeout, $shutdown, $force, $keepActive, $migratedfrom) = @_;
4159 $force = 1 if !defined($force) && !$shutdown;
4162 my $pid = check_running
($vmid, $nocheck, $migratedfrom);
4163 kill 15, $pid if $pid;
4164 my $conf = load_config
($vmid, $migratedfrom);
4165 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive);
4169 lock_config
($vmid, sub {
4171 my $pid = check_running
($vmid, $nocheck);
4176 $conf = load_config
($vmid);
4177 check_lock
($conf) if !$skiplock;
4178 if (!defined($timeout) && $shutdown && $conf->{startup
}) {
4179 my $opts = parse_startup
($conf->{startup
});
4180 $timeout = $opts->{down
} if $opts->{down
};
4184 $timeout = 60 if !defined($timeout);
4188 if (!$nocheck && $conf->{agent
}) {
4189 vm_qmp_command
($vmid, { execute
=> "guest-shutdown" }, $nocheck);
4191 vm_qmp_command
($vmid, { execute
=> "system_powerdown" }, $nocheck);
4194 vm_qmp_command
($vmid, { execute
=> "quit" }, $nocheck);
4201 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
4206 if ($count >= $timeout) {
4208 warn "VM still running - terminating now with SIGTERM\n";
4211 die "VM quit/powerdown failed - got timeout\n";
4214 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive) if $conf;
4219 warn "VM quit/powerdown failed - terminating now with SIGTERM\n";
4222 die "VM quit/powerdown failed\n";
4230 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
4235 if ($count >= $timeout) {
4236 warn "VM still running - terminating now with SIGKILL\n";
4241 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive) if $conf;
4246 my ($vmid, $skiplock) = @_;
4248 lock_config
($vmid, sub {
4250 my $conf = load_config
($vmid);
4252 check_lock
($conf) if !($skiplock || ($conf->{lock} && $conf->{lock} eq 'backup'));
4254 vm_mon_cmd
($vmid, "stop");
4259 my ($vmid, $skiplock) = @_;
4261 lock_config
($vmid, sub {
4263 my $conf = load_config
($vmid);
4265 check_lock
($conf) if !($skiplock || ($conf->{lock} && $conf->{lock} eq 'backup'));
4267 vm_mon_cmd
($vmid, "cont");
4272 my ($vmid, $skiplock, $key) = @_;
4274 lock_config
($vmid, sub {
4276 my $conf = load_config
($vmid);
4278 # there is no qmp command, so we use the human monitor command
4279 vm_human_monitor_command
($vmid, "sendkey $key");
4284 my ($storecfg, $vmid, $skiplock) = @_;
4286 lock_config
($vmid, sub {
4288 my $conf = load_config
($vmid);
4290 check_lock
($conf) if !$skiplock;
4292 if (!check_running
($vmid)) {
4293 fairsched_rmnod
($vmid); # try to destroy group
4294 destroy_vm
($storecfg, $vmid);
4296 die "VM $vmid is running - destroy failed\n";
4304 my ($filename, $buf) = @_;
4306 my $fh = IO
::File-
>new($filename, "w");
4307 return undef if !$fh;
4309 my $res = print $fh $buf;
4316 sub pci_device_info
{
4321 return undef if $name !~ m/^([a-f0-9]{4}):([a-f0-9]{2}):([a-f0-9]{2})\.([a-f0-9])$/;
4322 my ($domain, $bus, $slot, $func) = ($1, $2, $3, $4);
4324 my $irq = file_read_firstline
("$pcisysfs/devices/$name/irq");
4325 return undef if !defined($irq) || $irq !~ m/^\d+$/;
4327 my $vendor = file_read_firstline
("$pcisysfs/devices/$name/vendor");
4328 return undef if !defined($vendor) || $vendor !~ s/^0x//;
4330 my $product = file_read_firstline
("$pcisysfs/devices/$name/device");
4331 return undef if !defined($product) || $product !~ s/^0x//;
4336 product
=> $product,
4342 has_fl_reset
=> -f
"$pcisysfs/devices/$name/reset" || 0,
4351 my $name = $dev->{name
};
4353 my $fn = "$pcisysfs/devices/$name/reset";
4355 return file_write
($fn, "1");
4358 sub pci_dev_bind_to_stub
{
4361 my $name = $dev->{name
};
4363 my $testdir = "$pcisysfs/drivers/pci-stub/$name";
4364 return 1 if -d
$testdir;
4366 my $data = "$dev->{vendor} $dev->{product}";
4367 return undef if !file_write
("$pcisysfs/drivers/pci-stub/new_id", $data);
4369 my $fn = "$pcisysfs/devices/$name/driver/unbind";
4370 if (!file_write
($fn, $name)) {
4371 return undef if -f
$fn;
4374 $fn = "$pcisysfs/drivers/pci-stub/bind";
4375 if (! -d
$testdir) {
4376 return undef if !file_write
($fn, $name);
4382 sub pci_dev_bind_to_vfio
{
4385 my $name = $dev->{name
};
4387 my $vfio_basedir = "$pcisysfs/drivers/vfio-pci";
4389 if (!-d
$vfio_basedir) {
4390 system("/sbin/modprobe vfio-pci >/dev/null 2>/dev/null");
4392 die "Cannot find vfio-pci module!\n" if !-d
$vfio_basedir;
4394 my $testdir = "$vfio_basedir/$name";
4395 return 1 if -d
$testdir;
4397 my $data = "$dev->{vendor} $dev->{product}";
4398 return undef if !file_write
("$vfio_basedir/new_id", $data);
4400 my $fn = "$pcisysfs/devices/$name/driver/unbind";
4401 if (!file_write
($fn, $name)) {
4402 return undef if -f
$fn;
4405 $fn = "$vfio_basedir/bind";
4406 if (! -d
$testdir) {
4407 return undef if !file_write
($fn, $name);
4413 sub pci_dev_group_bind_to_vfio
{
4416 my $vfio_basedir = "$pcisysfs/drivers/vfio-pci";
4418 if (!-d
$vfio_basedir) {
4419 system("/sbin/modprobe vfio-pci >/dev/null 2>/dev/null");
4421 die "Cannot find vfio-pci module!\n" if !-d
$vfio_basedir;
4423 # get IOMMU group devices
4424 opendir(my $D, "$pcisysfs/devices/0000:$pciid/iommu_group/devices/") || die "Cannot open iommu_group: $!\n";
4425 my @devs = grep /^0000:/, readdir($D);
4428 foreach my $pciid (@devs) {
4429 $pciid =~ m/^([:\.\da-f]+)$/ or die "PCI ID $pciid not valid!\n";
4430 my $info = pci_device_info
($1);
4431 pci_dev_bind_to_vfio
($info) || die "Cannot bind $pciid to vfio\n";
4437 sub print_pci_addr
{
4438 my ($id, $bridges) = @_;
4442 piix3
=> { bus
=> 0, addr
=> 1 },
4443 #addr2 : first videocard
4444 balloon0
=> { bus
=> 0, addr
=> 3 },
4445 watchdog
=> { bus
=> 0, addr
=> 4 },
4446 scsihw0
=> { bus
=> 0, addr
=> 5 },
4447 scsihw1
=> { bus
=> 0, addr
=> 6 },
4448 ahci0
=> { bus
=> 0, addr
=> 7 },
4449 qga0
=> { bus
=> 0, addr
=> 8 },
4450 spice
=> { bus
=> 0, addr
=> 9 },
4451 virtio0
=> { bus
=> 0, addr
=> 10 },
4452 virtio1
=> { bus
=> 0, addr
=> 11 },
4453 virtio2
=> { bus
=> 0, addr
=> 12 },
4454 virtio3
=> { bus
=> 0, addr
=> 13 },
4455 virtio4
=> { bus
=> 0, addr
=> 14 },
4456 virtio5
=> { bus
=> 0, addr
=> 15 },
4457 hostpci0
=> { bus
=> 0, addr
=> 16 },
4458 hostpci1
=> { bus
=> 0, addr
=> 17 },
4459 net0
=> { bus
=> 0, addr
=> 18 },
4460 net1
=> { bus
=> 0, addr
=> 19 },
4461 net2
=> { bus
=> 0, addr
=> 20 },
4462 net3
=> { bus
=> 0, addr
=> 21 },
4463 net4
=> { bus
=> 0, addr
=> 22 },
4464 net5
=> { bus
=> 0, addr
=> 23 },
4465 vga1
=> { bus
=> 0, addr
=> 24 },
4466 vga2
=> { bus
=> 0, addr
=> 25 },
4467 vga3
=> { bus
=> 0, addr
=> 26 },
4468 hostpci2
=> { bus
=> 0, addr
=> 27 },
4469 hostpci3
=> { bus
=> 0, addr
=> 28 },
4470 #addr29 : usb-host (pve-usb.cfg)
4471 'pci.1' => { bus
=> 0, addr
=> 30 },
4472 'pci.2' => { bus
=> 0, addr
=> 31 },
4473 'net6' => { bus
=> 1, addr
=> 1 },
4474 'net7' => { bus
=> 1, addr
=> 2 },
4475 'net8' => { bus
=> 1, addr
=> 3 },
4476 'net9' => { bus
=> 1, addr
=> 4 },
4477 'net10' => { bus
=> 1, addr
=> 5 },
4478 'net11' => { bus
=> 1, addr
=> 6 },
4479 'net12' => { bus
=> 1, addr
=> 7 },
4480 'net13' => { bus
=> 1, addr
=> 8 },
4481 'net14' => { bus
=> 1, addr
=> 9 },
4482 'net15' => { bus
=> 1, addr
=> 10 },
4483 'net16' => { bus
=> 1, addr
=> 11 },
4484 'net17' => { bus
=> 1, addr
=> 12 },
4485 'net18' => { bus
=> 1, addr
=> 13 },
4486 'net19' => { bus
=> 1, addr
=> 14 },
4487 'net20' => { bus
=> 1, addr
=> 15 },
4488 'net21' => { bus
=> 1, addr
=> 16 },
4489 'net22' => { bus
=> 1, addr
=> 17 },
4490 'net23' => { bus
=> 1, addr
=> 18 },
4491 'net24' => { bus
=> 1, addr
=> 19 },
4492 'net25' => { bus
=> 1, addr
=> 20 },
4493 'net26' => { bus
=> 1, addr
=> 21 },
4494 'net27' => { bus
=> 1, addr
=> 22 },
4495 'net28' => { bus
=> 1, addr
=> 23 },
4496 'net29' => { bus
=> 1, addr
=> 24 },
4497 'net30' => { bus
=> 1, addr
=> 25 },
4498 'net31' => { bus
=> 1, addr
=> 26 },
4499 'virtio6' => { bus
=> 2, addr
=> 1 },
4500 'virtio7' => { bus
=> 2, addr
=> 2 },
4501 'virtio8' => { bus
=> 2, addr
=> 3 },
4502 'virtio9' => { bus
=> 2, addr
=> 4 },
4503 'virtio10' => { bus
=> 2, addr
=> 5 },
4504 'virtio11' => { bus
=> 2, addr
=> 6 },
4505 'virtio12' => { bus
=> 2, addr
=> 7 },
4506 'virtio13' => { bus
=> 2, addr
=> 8 },
4507 'virtio14' => { bus
=> 2, addr
=> 9 },
4508 'virtio15' => { bus
=> 2, addr
=> 10 },
4511 if (defined($devices->{$id}->{bus
}) && defined($devices->{$id}->{addr
})) {
4512 my $addr = sprintf("0x%x", $devices->{$id}->{addr
});
4513 my $bus = $devices->{$id}->{bus
};
4514 $res = ",bus=pci.$bus,addr=$addr";
4515 $bridges->{$bus} = 1 if $bridges;
4521 sub print_pcie_addr
{
4526 hostpci0
=> { bus
=> "ich9-pcie-port-1", addr
=> 0 },
4527 hostpci1
=> { bus
=> "ich9-pcie-port-2", addr
=> 0 },
4528 hostpci2
=> { bus
=> "ich9-pcie-port-3", addr
=> 0 },
4529 hostpci3
=> { bus
=> "ich9-pcie-port-4", addr
=> 0 },
4532 if (defined($devices->{$id}->{bus
}) && defined($devices->{$id}->{addr
})) {
4533 my $addr = sprintf("0x%x", $devices->{$id}->{addr
});
4534 my $bus = $devices->{$id}->{bus
};
4535 $res = ",bus=$bus,addr=$addr";
4541 # vzdump restore implementaion
4543 sub tar_archive_read_firstfile
{
4544 my $archive = shift;
4546 die "ERROR: file '$archive' does not exist\n" if ! -f
$archive;
4548 # try to detect archive type first
4549 my $pid = open (TMP
, "tar tf '$archive'|") ||
4550 die "unable to open file '$archive'\n";
4551 my $firstfile = <TMP
>;
4555 die "ERROR: archive contaions no data\n" if !$firstfile;
4561 sub tar_restore_cleanup
{
4562 my ($storecfg, $statfile) = @_;
4564 print STDERR
"starting cleanup\n";
4566 if (my $fd = IO
::File-
>new($statfile, "r")) {
4567 while (defined(my $line = <$fd>)) {
4568 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
4571 if ($volid =~ m
|^/|) {
4572 unlink $volid || die 'unlink failed\n';
4574 PVE
::Storage
::vdisk_free
($storecfg, $volid);
4576 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
4578 print STDERR
"unable to cleanup '$volid' - $@" if $@;
4580 print STDERR
"unable to parse line in statfile - $line";
4587 sub restore_archive
{
4588 my ($archive, $vmid, $user, $opts) = @_;
4590 my $format = $opts->{format
};
4593 if ($archive =~ m/\.tgz$/ || $archive =~ m/\.tar\.gz$/) {
4594 $format = 'tar' if !$format;
4596 } elsif ($archive =~ m/\.tar$/) {
4597 $format = 'tar' if !$format;
4598 } elsif ($archive =~ m/.tar.lzo$/) {
4599 $format = 'tar' if !$format;
4601 } elsif ($archive =~ m/\.vma$/) {
4602 $format = 'vma' if !$format;
4603 } elsif ($archive =~ m/\.vma\.gz$/) {
4604 $format = 'vma' if !$format;
4606 } elsif ($archive =~ m/\.vma\.lzo$/) {
4607 $format = 'vma' if !$format;
4610 $format = 'vma' if !$format; # default
4613 # try to detect archive format
4614 if ($format eq 'tar') {
4615 return restore_tar_archive
($archive, $vmid, $user, $opts);
4617 return restore_vma_archive
($archive, $vmid, $user, $opts, $comp);
4621 sub restore_update_config_line
{
4622 my ($outfd, $cookie, $vmid, $map, $line, $unique) = @_;
4624 return if $line =~ m/^\#qmdump\#/;
4625 return if $line =~ m/^\#vzdump\#/;
4626 return if $line =~ m/^lock:/;
4627 return if $line =~ m/^unused\d+:/;
4628 return if $line =~ m/^parent:/;
4629 return if $line =~ m/^template:/; # restored VM is never a template
4631 if (($line =~ m/^(vlan(\d+)):\s*(\S+)\s*$/)) {
4632 # try to convert old 1.X settings
4633 my ($id, $ind, $ethcfg) = ($1, $2, $3);
4634 foreach my $devconfig (PVE
::Tools
::split_list
($ethcfg)) {
4635 my ($model, $macaddr) = split(/\=/, $devconfig);
4636 $macaddr = PVE
::Tools
::random_ether_addr
() if !$macaddr || $unique;
4639 bridge
=> "vmbr$ind",
4640 macaddr
=> $macaddr,
4642 my $netstr = print_net
($net);
4644 print $outfd "net$cookie->{netcount}: $netstr\n";
4645 $cookie->{netcount
}++;
4647 } elsif (($line =~ m/^(net\d+):\s*(\S+)\s*$/) && $unique) {
4648 my ($id, $netstr) = ($1, $2);
4649 my $net = parse_net
($netstr);
4650 $net->{macaddr
} = PVE
::Tools
::random_ether_addr
() if $net->{macaddr
};
4651 $netstr = print_net
($net);
4652 print $outfd "$id: $netstr\n";
4653 } elsif ($line =~ m/^((ide|scsi|virtio|sata)\d+):\s*(\S+)\s*$/) {
4656 if ($line =~ m/backup=no/) {
4657 print $outfd "#$line";
4658 } elsif ($virtdev && $map->{$virtdev}) {
4659 my $di = parse_drive
($virtdev, $value);
4660 delete $di->{format
}; # format can change on restore
4661 $di->{file
} = $map->{$virtdev};
4662 $value = print_drive
($vmid, $di);
4663 print $outfd "$virtdev: $value\n";
4673 my ($cfg, $vmid) = @_;
4675 my $info = PVE
::Storage
::vdisk_list
($cfg, undef, $vmid);
4677 my $volid_hash = {};
4678 foreach my $storeid (keys %$info) {
4679 foreach my $item (@{$info->{$storeid}}) {
4680 next if !($item->{volid
} && $item->{size
});
4681 $item->{path
} = PVE
::Storage
::path
($cfg, $item->{volid
});
4682 $volid_hash->{$item->{volid
}} = $item;
4689 sub get_used_paths
{
4690 my ($vmid, $storecfg, $conf, $scan_snapshots, $skip_drive) = @_;
4694 my $scan_config = sub {
4695 my ($cref, $snapname) = @_;
4697 foreach my $key (keys %$cref) {
4698 my $value = $cref->{$key};
4699 if (valid_drivename
($key)) {
4700 next if $skip_drive && $key eq $skip_drive;
4701 my $drive = parse_drive
($key, $value);
4702 next if !$drive || !$drive->{file
} || drive_is_cdrom
($drive);
4703 if ($drive->{file
} =~ m!^/!) {
4704 $used_path->{$drive->{file
}}++; # = 1;
4706 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
}, 1);
4708 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid, 1);
4710 my $path = PVE
::Storage
::path
($storecfg, $drive->{file
}, $snapname);
4711 $used_path->{$path}++; # = 1;
4717 &$scan_config($conf);
4721 if ($scan_snapshots) {
4722 foreach my $snapname (keys %{$conf->{snapshots
}}) {
4723 &$scan_config($conf->{snapshots
}->{$snapname}, $snapname);
4730 sub update_disksize
{
4731 my ($vmid, $conf, $volid_hash) = @_;
4737 # Note: it is allowed to define multiple storages with same path (alias), so
4738 # we need to check both 'volid' and real 'path' (two different volid can point
4739 # to the same path).
4744 foreach my $opt (keys %$conf) {
4745 if (valid_drivename
($opt)) {
4746 my $drive = parse_drive
($opt, $conf->{$opt});
4747 my $volid = $drive->{file
};
4750 $used->{$volid} = 1;
4751 if ($volid_hash->{$volid} &&
4752 (my $path = $volid_hash->{$volid}->{path
})) {
4753 $usedpath->{$path} = 1;
4756 next if drive_is_cdrom
($drive);
4757 next if !$volid_hash->{$volid};
4759 $drive->{size
} = $volid_hash->{$volid}->{size
};
4760 my $new = print_drive
($vmid, $drive);
4761 if ($new ne $conf->{$opt}) {
4763 $conf->{$opt} = $new;
4768 # remove 'unusedX' entry if volume is used
4769 foreach my $opt (keys %$conf) {
4770 next if $opt !~ m/^unused\d+$/;
4771 my $volid = $conf->{$opt};
4772 my $path = $volid_hash->{$volid}->{path
} if $volid_hash->{$volid};
4773 if ($used->{$volid} || ($path && $usedpath->{$path})) {
4775 delete $conf->{$opt};
4779 foreach my $volid (sort keys %$volid_hash) {
4780 next if $volid =~ m/vm-$vmid-state-/;
4781 next if $used->{$volid};
4782 my $path = $volid_hash->{$volid}->{path
};
4783 next if !$path; # just to be sure
4784 next if $usedpath->{$path};
4786 add_unused_volume
($conf, $volid);
4787 $usedpath->{$path} = 1; # avoid to add more than once (aliases)
4794 my ($vmid, $nolock) = @_;
4796 my $cfg = PVE
::Cluster
::cfs_read_file
("storage.cfg");
4798 my $volid_hash = scan_volids
($cfg, $vmid);
4800 my $updatefn = sub {
4803 my $conf = load_config
($vmid);
4808 foreach my $volid (keys %$volid_hash) {
4809 my $info = $volid_hash->{$volid};
4810 $vm_volids->{$volid} = $info if $info->{vmid
} && $info->{vmid
} == $vmid;
4813 my $changes = update_disksize
($vmid, $conf, $vm_volids);
4815 update_config_nolock
($vmid, $conf, 1) if $changes;
4818 if (defined($vmid)) {
4822 lock_config
($vmid, $updatefn, $vmid);
4825 my $vmlist = config_list
();
4826 foreach my $vmid (keys %$vmlist) {
4830 lock_config
($vmid, $updatefn, $vmid);
4836 sub restore_vma_archive
{
4837 my ($archive, $vmid, $user, $opts, $comp) = @_;
4839 my $input = $archive eq '-' ?
"<&STDIN" : undef;
4840 my $readfrom = $archive;
4845 my $qarchive = PVE
::Tools
::shellquote
($archive);
4846 if ($comp eq 'gzip') {
4847 $uncomp = "zcat $qarchive|";
4848 } elsif ($comp eq 'lzop') {
4849 $uncomp = "lzop -d -c $qarchive|";
4851 die "unknown compression method '$comp'\n";
4856 my $tmpdir = "/var/tmp/vzdumptmp$$";
4859 # disable interrupts (always do cleanups)
4860 local $SIG{INT
} = $SIG{TERM
} = $SIG{QUIT
} = $SIG{HUP
} = sub {
4861 warn "got interrupt - ignored\n";
4864 my $mapfifo = "/var/tmp/vzdumptmp$$.fifo";
4865 POSIX
::mkfifo
($mapfifo, 0600);
4868 my $openfifo = sub {
4869 open($fifofh, '>', $mapfifo) || die $!;
4872 my $cmd = "${uncomp}vma extract -v -r $mapfifo $readfrom $tmpdir";
4879 my $rpcenv = PVE
::RPCEnvironment
::get
();
4881 my $conffile = config_file
($vmid);
4882 my $tmpfn = "$conffile.$$.tmp";
4884 # Note: $oldconf is undef if VM does not exists
4885 my $oldconf = PVE
::Cluster
::cfs_read_file
(cfs_config_path
($vmid));
4887 my $print_devmap = sub {
4888 my $virtdev_hash = {};
4890 my $cfgfn = "$tmpdir/qemu-server.conf";
4892 # we can read the config - that is already extracted
4893 my $fh = IO
::File-
>new($cfgfn, "r") ||
4894 "unable to read qemu-server.conf - $!\n";
4896 while (defined(my $line = <$fh>)) {
4897 if ($line =~ m/^\#qmdump\#map:(\S+):(\S+):(\S*):(\S*):$/) {
4898 my ($virtdev, $devname, $storeid, $format) = ($1, $2, $3, $4);
4899 die "archive does not contain data for drive '$virtdev'\n"
4900 if !$devinfo->{$devname};
4901 if (defined($opts->{storage
})) {
4902 $storeid = $opts->{storage
} || 'local';
4903 } elsif (!$storeid) {
4906 $format = 'raw' if !$format;
4907 $devinfo->{$devname}->{devname
} = $devname;
4908 $devinfo->{$devname}->{virtdev
} = $virtdev;
4909 $devinfo->{$devname}->{format
} = $format;
4910 $devinfo->{$devname}->{storeid
} = $storeid;
4912 # check permission on storage
4913 my $pool = $opts->{pool
}; # todo: do we need that?
4914 if ($user ne 'root@pam') {
4915 $rpcenv->check($user, "/storage/$storeid", ['Datastore.AllocateSpace']);
4918 $virtdev_hash->{$virtdev} = $devinfo->{$devname};
4922 foreach my $devname (keys %$devinfo) {
4923 die "found no device mapping information for device '$devname'\n"
4924 if !$devinfo->{$devname}->{virtdev
};
4927 my $cfg = cfs_read_file
('storage.cfg');
4929 # create empty/temp config
4931 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
4932 foreach_drive
($oldconf, sub {
4933 my ($ds, $drive) = @_;
4935 return if drive_is_cdrom
($drive);
4937 my $volid = $drive->{file
};
4939 return if !$volid || $volid =~ m
|^/|;
4941 my ($path, $owner) = PVE
::Storage
::path
($cfg, $volid);
4942 return if !$path || !$owner || ($owner != $vmid);
4944 # Note: only delete disk we want to restore
4945 # other volumes will become unused
4946 if ($virtdev_hash->{$ds}) {
4947 PVE
::Storage
::vdisk_free
($cfg, $volid);
4953 foreach my $virtdev (sort keys %$virtdev_hash) {
4954 my $d = $virtdev_hash->{$virtdev};
4955 my $alloc_size = int(($d->{size
} + 1024 - 1)/1024);
4956 my $scfg = PVE
::Storage
::storage_config
($cfg, $d->{storeid
});
4958 # test if requested format is supported
4959 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($cfg, $d->{storeid
});
4960 my $supported = grep { $_ eq $d->{format
} } @$validFormats;
4961 $d->{format
} = $defFormat if !$supported;
4963 my $volid = PVE
::Storage
::vdisk_alloc
($cfg, $d->{storeid
}, $vmid,
4964 $d->{format
}, undef, $alloc_size);
4965 print STDERR
"new volume ID is '$volid'\n";
4966 $d->{volid
} = $volid;
4967 my $path = PVE
::Storage
::path
($cfg, $volid);
4969 my $write_zeros = 1;
4970 # fixme: what other storages types initialize volumes with zero?
4971 if ($scfg->{type
} eq 'dir' || $scfg->{type
} eq 'nfs' || $scfg->{type
} eq 'glusterfs' ||
4972 $scfg->{type
} eq 'sheepdog' || $scfg->{type
} eq 'rbd') {
4976 print $fifofh "${write_zeros}:$d->{devname}=$path\n";
4978 print "map '$d->{devname}' to '$path' (write zeros = ${write_zeros})\n";
4979 $map->{$virtdev} = $volid;
4982 $fh->seek(0, 0) || die "seek failed - $!\n";
4984 my $outfd = new IO
::File
($tmpfn, "w") ||
4985 die "unable to write config for VM $vmid\n";
4987 my $cookie = { netcount
=> 0 };
4988 while (defined(my $line = <$fh>)) {
4989 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
4998 local $SIG{INT
} = $SIG{TERM
} = $SIG{QUIT
} = $SIG{HUP
} = $SIG{PIPE
} = sub {
4999 die "interrupted by signal\n";
5001 local $SIG{ALRM
} = sub { die "got timeout\n"; };
5003 $oldtimeout = alarm($timeout);
5010 if ($line =~ m/^DEV:\sdev_id=(\d+)\ssize:\s(\d+)\sdevname:\s(\S+)$/) {
5011 my ($dev_id, $size, $devname) = ($1, $2, $3);
5012 $devinfo->{$devname} = { size
=> $size, dev_id
=> $dev_id };
5013 } elsif ($line =~ m/^CTIME: /) {
5014 # we correctly received the vma config, so we can disable
5015 # the timeout now for disk allocation (set to 10 minutes, so
5016 # that we always timeout if something goes wrong)
5019 print $fifofh "done\n";
5020 my $tmp = $oldtimeout || 0;
5021 $oldtimeout = undef;
5027 print "restore vma archive: $cmd\n";
5028 run_command
($cmd, input
=> $input, outfunc
=> $parser, afterfork
=> $openfifo);
5032 alarm($oldtimeout) if $oldtimeout;
5040 my $cfg = cfs_read_file
('storage.cfg');
5041 foreach my $devname (keys %$devinfo) {
5042 my $volid = $devinfo->{$devname}->{volid
};
5045 if ($volid =~ m
|^/|) {
5046 unlink $volid || die 'unlink failed\n';
5048 PVE
::Storage
::vdisk_free
($cfg, $volid);
5050 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
5052 print STDERR
"unable to cleanup '$volid' - $@" if $@;
5059 rename($tmpfn, $conffile) ||
5060 die "unable to commit configuration file '$conffile'\n";
5062 PVE
::Cluster
::cfs_update
(); # make sure we read new file
5064 eval { rescan
($vmid, 1); };
5068 sub restore_tar_archive
{
5069 my ($archive, $vmid, $user, $opts) = @_;
5071 if ($archive ne '-') {
5072 my $firstfile = tar_archive_read_firstfile
($archive);
5073 die "ERROR: file '$archive' dos not lock like a QemuServer vzdump backup\n"
5074 if $firstfile ne 'qemu-server.conf';
5077 my $storecfg = cfs_read_file
('storage.cfg');
5079 # destroy existing data - keep empty config
5080 my $vmcfgfn = config_file
($vmid);
5081 destroy_vm
($storecfg, $vmid, 1) if -f
$vmcfgfn;
5083 my $tocmd = "/usr/lib/qemu-server/qmextract";
5085 $tocmd .= " --storage " . PVE
::Tools
::shellquote
($opts->{storage
}) if $opts->{storage
};
5086 $tocmd .= " --pool " . PVE
::Tools
::shellquote
($opts->{pool
}) if $opts->{pool
};
5087 $tocmd .= ' --prealloc' if $opts->{prealloc
};
5088 $tocmd .= ' --info' if $opts->{info
};
5090 # tar option "xf" does not autodetect compression when read from STDIN,
5091 # so we pipe to zcat
5092 my $cmd = "zcat -f|tar xf " . PVE
::Tools
::shellquote
($archive) . " " .
5093 PVE
::Tools
::shellquote
("--to-command=$tocmd");
5095 my $tmpdir = "/var/tmp/vzdumptmp$$";
5098 local $ENV{VZDUMP_TMPDIR
} = $tmpdir;
5099 local $ENV{VZDUMP_VMID
} = $vmid;
5100 local $ENV{VZDUMP_USER
} = $user;
5102 my $conffile = config_file
($vmid);
5103 my $tmpfn = "$conffile.$$.tmp";
5105 # disable interrupts (always do cleanups)
5106 local $SIG{INT
} = $SIG{TERM
} = $SIG{QUIT
} = $SIG{HUP
} = sub {
5107 print STDERR
"got interrupt - ignored\n";
5112 local $SIG{INT
} = $SIG{TERM
} = $SIG{QUIT
} = $SIG{HUP
} = $SIG{PIPE
} = sub {
5113 die "interrupted by signal\n";
5116 if ($archive eq '-') {
5117 print "extracting archive from STDIN\n";
5118 run_command
($cmd, input
=> "<&STDIN");
5120 print "extracting archive '$archive'\n";
5124 return if $opts->{info
};
5128 my $statfile = "$tmpdir/qmrestore.stat";
5129 if (my $fd = IO
::File-
>new($statfile, "r")) {
5130 while (defined (my $line = <$fd>)) {
5131 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
5132 $map->{$1} = $2 if $1;
5134 print STDERR
"unable to parse line in statfile - $line\n";
5140 my $confsrc = "$tmpdir/qemu-server.conf";
5142 my $srcfd = new IO
::File
($confsrc, "r") ||
5143 die "unable to open file '$confsrc'\n";
5145 my $outfd = new IO
::File
($tmpfn, "w") ||
5146 die "unable to write config for VM $vmid\n";
5148 my $cookie = { netcount
=> 0 };
5149 while (defined (my $line = <$srcfd>)) {
5150 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
5162 tar_restore_cleanup
($storecfg, "$tmpdir/qmrestore.stat") if !$opts->{info
};
5169 rename $tmpfn, $conffile ||
5170 die "unable to commit configuration file '$conffile'\n";
5172 PVE
::Cluster
::cfs_update
(); # make sure we read new file
5174 eval { rescan
($vmid, 1); };
5179 # Internal snapshots
5181 # NOTE: Snapshot create/delete involves several non-atomic
5182 # action, and can take a long time.
5183 # So we try to avoid locking the file and use 'lock' variable
5184 # inside the config file instead.
5186 my $snapshot_copy_config = sub {
5187 my ($source, $dest) = @_;
5189 foreach my $k (keys %$source) {
5190 next if $k eq 'snapshots';
5191 next if $k eq 'snapstate';
5192 next if $k eq 'snaptime';
5193 next if $k eq 'vmstate';
5194 next if $k eq 'lock';
5195 next if $k eq 'digest';
5196 next if $k eq 'description';
5197 next if $k =~ m/^unused\d+$/;
5199 $dest->{$k} = $source->{$k};
5203 my $snapshot_apply_config = sub {
5204 my ($conf, $snap) = @_;
5206 # copy snapshot list
5208 snapshots
=> $conf->{snapshots
},
5211 # keep description and list of unused disks
5212 foreach my $k (keys %$conf) {
5213 next if !($k =~ m/^unused\d+$/ || $k eq 'description');
5214 $newconf->{$k} = $conf->{$k};
5217 &$snapshot_copy_config($snap, $newconf);
5222 sub foreach_writable_storage
{
5223 my ($conf, $func) = @_;
5227 foreach my $ds (keys %$conf) {
5228 next if !valid_drivename
($ds);
5230 my $drive = parse_drive
($ds, $conf->{$ds});
5232 next if drive_is_cdrom
($drive);
5234 my $volid = $drive->{file
};
5236 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
5237 $sidhash->{$sid} = $sid if $sid;
5240 foreach my $sid (sort keys %$sidhash) {
5245 my $alloc_vmstate_volid = sub {
5246 my ($storecfg, $vmid, $conf, $snapname) = @_;
5248 # Note: we try to be smart when selecting a $target storage
5252 # search shared storage first
5253 foreach_writable_storage
($conf, sub {
5255 my $scfg = PVE
::Storage
::storage_config
($storecfg, $sid);
5256 return if !$scfg->{shared
};
5258 $target = $sid if !$target || $scfg->{path
}; # prefer file based storage
5262 # now search local storage
5263 foreach_writable_storage
($conf, sub {
5265 my $scfg = PVE
::Storage
::storage_config
($storecfg, $sid);
5266 return if $scfg->{shared
};
5268 $target = $sid if !$target || $scfg->{path
}; # prefer file based storage;
5272 $target = 'local' if !$target;
5274 my $driver_state_size = 500; # assume 32MB is enough to safe all driver state;
5275 # we abort live save after $conf->{memory}, so we need at max twice that space
5276 my $size = $conf->{memory
}*2 + $driver_state_size;
5278 my $name = "vm-$vmid-state-$snapname";
5279 my $scfg = PVE
::Storage
::storage_config
($storecfg, $target);
5280 $name .= ".raw" if $scfg->{path
}; # add filename extension for file base storage
5281 my $volid = PVE
::Storage
::vdisk_alloc
($storecfg, $target, $vmid, 'raw', $name, $size*1024);
5286 my $snapshot_prepare = sub {
5287 my ($vmid, $snapname, $save_vmstate, $comment) = @_;
5291 my $updatefn = sub {
5293 my $conf = load_config
($vmid);
5295 die "you can't take a snapshot if it's a template\n"
5296 if is_template
($conf);
5300 $conf->{lock} = 'snapshot';
5302 die "snapshot name '$snapname' already used\n"
5303 if defined($conf->{snapshots
}->{$snapname});
5305 my $storecfg = PVE
::Storage
::config
();
5306 die "snapshot feature is not available" if !has_feature
('snapshot', $conf, $storecfg);
5308 $snap = $conf->{snapshots
}->{$snapname} = {};
5310 if ($save_vmstate && check_running
($vmid)) {
5311 $snap->{vmstate
} = &$alloc_vmstate_volid($storecfg, $vmid, $conf, $snapname);
5314 &$snapshot_copy_config($conf, $snap);
5316 $snap->{snapstate
} = "prepare";
5317 $snap->{snaptime
} = time();
5318 $snap->{description
} = $comment if $comment;
5320 # always overwrite machine if we save vmstate. This makes sure we
5321 # can restore it later using correct machine type
5322 $snap->{machine
} = get_current_qemu_machine
($vmid) if $snap->{vmstate
};
5324 update_config_nolock
($vmid, $conf, 1);
5327 lock_config
($vmid, $updatefn);
5332 my $snapshot_commit = sub {
5333 my ($vmid, $snapname) = @_;
5335 my $updatefn = sub {
5337 my $conf = load_config
($vmid);
5339 die "missing snapshot lock\n"
5340 if !($conf->{lock} && $conf->{lock} eq 'snapshot');
5342 my $has_machine_config = defined($conf->{machine
});
5344 my $snap = $conf->{snapshots
}->{$snapname};
5346 die "snapshot '$snapname' does not exist\n" if !defined($snap);
5348 die "wrong snapshot state\n"
5349 if !($snap->{snapstate
} && $snap->{snapstate
} eq "prepare");
5351 delete $snap->{snapstate
};
5352 delete $conf->{lock};
5354 my $newconf = &$snapshot_apply_config($conf, $snap);
5356 delete $newconf->{machine
} if !$has_machine_config;
5358 $newconf->{parent
} = $snapname;
5360 update_config_nolock
($vmid, $newconf, 1);
5363 lock_config
($vmid, $updatefn);
5366 sub snapshot_rollback
{
5367 my ($vmid, $snapname) = @_;
5373 my $storecfg = PVE
::Storage
::config
();
5375 my $updatefn = sub {
5377 my $conf = load_config
($vmid);
5379 die "you can't rollback if vm is a template\n" if is_template
($conf);
5381 $snap = $conf->{snapshots
}->{$snapname};
5383 die "snapshot '$snapname' does not exist\n" if !defined($snap);
5385 die "unable to rollback to incomplete snapshot (snapstate = $snap->{snapstate})\n"
5386 if $snap->{snapstate
};
5390 vm_stop
($storecfg, $vmid, undef, undef, 5, undef, undef);
5393 die "unable to rollback vm $vmid: vm is running\n"
5394 if check_running
($vmid);
5397 $conf->{lock} = 'rollback';
5399 die "got wrong lock\n" if !($conf->{lock} && $conf->{lock} eq 'rollback');
5400 delete $conf->{lock};
5406 my $has_machine_config = defined($conf->{machine
});
5408 # copy snapshot config to current config
5409 $conf = &$snapshot_apply_config($conf, $snap);
5410 $conf->{parent
} = $snapname;
5412 # Note: old code did not store 'machine', so we try to be smart
5413 # and guess the snapshot was generated with kvm 1.4 (pc-i440fx-1.4).
5414 $forcemachine = $conf->{machine
} || 'pc-i440fx-1.4';
5415 # we remove the 'machine' configuration if not explicitly specified
5416 # in the original config.
5417 delete $conf->{machine
} if $snap->{vmstate
} && !$has_machine_config;
5420 update_config_nolock
($vmid, $conf, 1);
5422 if (!$prepare && $snap->{vmstate
}) {
5423 my $statefile = PVE
::Storage
::path
($storecfg, $snap->{vmstate
});
5424 vm_start
($storecfg, $vmid, $statefile, undef, undef, undef, $forcemachine);
5428 lock_config
($vmid, $updatefn);
5430 foreach_drive
($snap, sub {
5431 my ($ds, $drive) = @_;
5433 return if drive_is_cdrom
($drive);
5435 my $volid = $drive->{file
};
5436 my $device = "drive-$ds";
5438 PVE
::Storage
::volume_snapshot_rollback
($storecfg, $volid, $snapname);
5442 lock_config
($vmid, $updatefn);
5445 my $savevm_wait = sub {
5449 my $stat = vm_mon_cmd_nocheck
($vmid, "query-savevm");
5450 if (!$stat->{status
}) {
5451 die "savevm not active\n";
5452 } elsif ($stat->{status
} eq 'active') {
5455 } elsif ($stat->{status
} eq 'completed') {
5458 die "query-savevm returned status '$stat->{status}'\n";
5463 sub snapshot_create
{
5464 my ($vmid, $snapname, $save_vmstate, $comment) = @_;
5466 my $snap = &$snapshot_prepare($vmid, $snapname, $save_vmstate, $comment);
5468 $save_vmstate = 0 if !$snap->{vmstate
}; # vm is not running
5470 my $config = load_config
($vmid);
5472 my $running = check_running
($vmid);
5474 my $freezefs = $running && $config->{agent
};
5475 $freezefs = 0 if $snap->{vmstate
}; # not needed if we save RAM
5480 eval { vm_mon_cmd
($vmid, "guest-fsfreeze-freeze"); };
5481 warn "guest-fsfreeze-freeze problems - $@" if $@;
5485 # create internal snapshots of all drives
5487 my $storecfg = PVE
::Storage
::config
();
5490 if ($snap->{vmstate
}) {
5491 my $path = PVE
::Storage
::path
($storecfg, $snap->{vmstate
});
5492 vm_mon_cmd
($vmid, "savevm-start", statefile
=> $path);
5493 &$savevm_wait($vmid);
5495 vm_mon_cmd
($vmid, "savevm-start");
5499 foreach_drive
($snap, sub {
5500 my ($ds, $drive) = @_;
5502 return if drive_is_cdrom
($drive);
5504 my $volid = $drive->{file
};
5505 my $device = "drive-$ds";
5507 qemu_volume_snapshot
($vmid, $device, $storecfg, $volid, $snapname);
5508 $drivehash->{$ds} = 1;
5514 eval { vm_mon_cmd
($vmid, "savevm-end") };
5518 eval { vm_mon_cmd
($vmid, "guest-fsfreeze-thaw"); };
5519 warn "guest-fsfreeze-thaw problems - $@" if $@;
5522 # savevm-end is async, we need to wait
5524 my $stat = vm_mon_cmd_nocheck
($vmid, "query-savevm");
5525 if (!$stat->{bytes
}) {
5528 print "savevm not yet finished\n";
5536 warn "snapshot create failed: starting cleanup\n";
5537 eval { snapshot_delete
($vmid, $snapname, 0, $drivehash); };
5542 &$snapshot_commit($vmid, $snapname);
5545 # Note: $drivehash is only set when called from snapshot_create.
5546 sub snapshot_delete
{
5547 my ($vmid, $snapname, $force, $drivehash) = @_;
5554 my $unlink_parent = sub {
5555 my ($confref, $new_parent) = @_;
5557 if ($confref->{parent
} && $confref->{parent
} eq $snapname) {
5559 $confref->{parent
} = $new_parent;
5561 delete $confref->{parent
};
5566 my $updatefn = sub {
5567 my ($remove_drive) = @_;
5569 my $conf = load_config
($vmid);
5573 die "you can't delete a snapshot if vm is a template\n"
5574 if is_template
($conf);
5577 $snap = $conf->{snapshots
}->{$snapname};
5579 die "snapshot '$snapname' does not exist\n" if !defined($snap);
5581 # remove parent refs
5583 &$unlink_parent($conf, $snap->{parent
});
5584 foreach my $sn (keys %{$conf->{snapshots
}}) {
5585 next if $sn eq $snapname;
5586 &$unlink_parent($conf->{snapshots
}->{$sn}, $snap->{parent
});
5590 if ($remove_drive) {
5591 if ($remove_drive eq 'vmstate') {
5592 delete $snap->{$remove_drive};
5594 my $drive = parse_drive
($remove_drive, $snap->{$remove_drive});
5595 my $volid = $drive->{file
};
5596 delete $snap->{$remove_drive};
5597 add_unused_volume
($conf, $volid);
5602 $snap->{snapstate
} = 'delete';
5604 delete $conf->{snapshots
}->{$snapname};
5605 delete $conf->{lock} if $drivehash;
5606 foreach my $volid (@$unused) {
5607 add_unused_volume
($conf, $volid);
5611 update_config_nolock
($vmid, $conf, 1);
5614 lock_config
($vmid, $updatefn);
5616 # now remove vmstate file
5618 my $storecfg = PVE
::Storage
::config
();
5620 if ($snap->{vmstate
}) {
5621 eval { PVE
::Storage
::vdisk_free
($storecfg, $snap->{vmstate
}); };
5623 die $err if !$force;
5626 # save changes (remove vmstate from snapshot)
5627 lock_config
($vmid, $updatefn, 'vmstate') if !$force;
5630 # now remove all internal snapshots
5631 foreach_drive
($snap, sub {
5632 my ($ds, $drive) = @_;
5634 return if drive_is_cdrom
($drive);
5636 my $volid = $drive->{file
};
5637 my $device = "drive-$ds";
5639 if (!$drivehash || $drivehash->{$ds}) {
5640 eval { qemu_volume_snapshot_delete
($vmid, $device, $storecfg, $volid, $snapname); };
5642 die $err if !$force;
5647 # save changes (remove drive fron snapshot)
5648 lock_config
($vmid, $updatefn, $ds) if !$force;
5649 push @$unused, $volid;
5652 # now cleanup config
5654 lock_config
($vmid, $updatefn);
5658 my ($feature, $conf, $storecfg, $snapname, $running) = @_;
5661 foreach_drive
($conf, sub {
5662 my ($ds, $drive) = @_;
5664 return if drive_is_cdrom
($drive);
5665 my $volid = $drive->{file
};
5666 $err = 1 if !PVE
::Storage
::volume_has_feature
($storecfg, $feature, $volid, $snapname, $running);
5669 return $err ?
0 : 1;
5672 sub template_create
{
5673 my ($vmid, $conf, $disk) = @_;
5675 my $storecfg = PVE
::Storage
::config
();
5677 foreach_drive
($conf, sub {
5678 my ($ds, $drive) = @_;
5680 return if drive_is_cdrom
($drive);
5681 return if $disk && $ds ne $disk;
5683 my $volid = $drive->{file
};
5684 return if !PVE
::Storage
::volume_has_feature
($storecfg, 'template', $volid);
5686 my $voliddst = PVE
::Storage
::vdisk_create_base
($storecfg, $volid);
5687 $drive->{file
} = $voliddst;
5688 $conf->{$ds} = print_drive
($vmid, $drive);
5689 update_config_nolock
($vmid, $conf, 1);
5696 return 1 if defined $conf->{template
} && $conf->{template
} == 1;
5699 sub qemu_img_convert
{
5700 my ($src_volid, $dst_volid, $size, $snapname) = @_;
5702 my $storecfg = PVE
::Storage
::config
();
5703 my ($src_storeid, $src_volname) = PVE
::Storage
::parse_volume_id
($src_volid, 1);
5704 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid, 1);
5706 if ($src_storeid && $dst_storeid) {
5707 my $src_scfg = PVE
::Storage
::storage_config
($storecfg, $src_storeid);
5708 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
5710 my $src_format = qemu_img_format
($src_scfg, $src_volname);
5711 my $dst_format = qemu_img_format
($dst_scfg, $dst_volname);
5713 my $src_path = PVE
::Storage
::path
($storecfg, $src_volid, $snapname);
5714 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
5717 push @$cmd, '/usr/bin/qemu-img', 'convert', '-t', 'writeback', '-p', '-n';
5718 push @$cmd, '-s', $snapname if($snapname && $src_format eq "qcow2");
5719 push @$cmd, '-f', $src_format, '-O', $dst_format, $src_path, $dst_path;
5723 if($line =~ m/\((\S+)\/100\
%\)/){
5725 my $transferred = int($size * $percent / 100);
5726 my $remaining = $size - $transferred;
5728 print "transferred: $transferred bytes remaining: $remaining bytes total: $size bytes progression: $percent %\n";
5733 eval { run_command
($cmd, timeout
=> undef, outfunc
=> $parser); };
5735 die "copy failed: $err" if $err;
5739 sub qemu_img_format
{
5740 my ($scfg, $volname) = @_;
5742 if ($scfg->{path
} && $volname =~ m/\.(raw|qcow2|qed|vmdk)$/) {
5744 } elsif ($scfg->{type
} eq 'iscsi') {
5745 return "host_device";
5751 sub qemu_drive_mirror
{
5752 my ($vmid, $drive, $dst_volid, $vmiddst) = @_;
5759 my $storecfg = PVE
::Storage
::config
();
5760 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid);
5762 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
5765 if ($dst_volname =~ m/\.(raw|qcow2)$/){
5769 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
5771 my $opts = { timeout
=> 10, device
=> "drive-$drive", mode
=> "existing", sync
=> "full", target
=> $dst_path };
5772 $opts->{format
} = $format if $format;
5774 #fixme : sometime drive-mirror timeout, but works fine after.
5775 # (I have see the problem with big volume > 200GB), so we need to eval
5776 eval { vm_mon_cmd
($vmid, "drive-mirror", %$opts); };
5777 # ignore errors here
5781 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
5782 my $stat = @$stats[0];
5783 die "mirroring job seem to have die. Maybe do you have bad sectors?" if !$stat;
5784 die "error job is not mirroring" if $stat->{type
} ne "mirror";
5786 my $busy = $stat->{busy
};
5788 if (my $total = $stat->{len
}) {
5789 my $transferred = $stat->{offset
} || 0;
5790 my $remaining = $total - $transferred;
5791 my $percent = sprintf "%.2f", ($transferred * 100 / $total);
5793 print "transferred: $transferred bytes remaining: $remaining bytes total: $total bytes progression: $percent % busy: $busy\n";
5796 if ($stat->{len
} == $stat->{offset
}) {
5797 if ($busy eq 'false') {
5799 last if $vmiddst != $vmid;
5801 # try to switch the disk if source and destination are on the same guest
5802 eval { vm_mon_cmd
($vmid, "block-job-complete", device
=> "drive-$drive") };
5804 die $@ if $@ !~ m/cannot be completed/;
5807 if ($count > $maxwait) {
5808 # if too much writes to disk occurs at the end of migration
5809 #the disk needs to be freezed to be able to complete the migration
5810 vm_suspend
($vmid,1);
5815 $old_len = $stat->{offset
};
5819 vm_resume
($vmid, 1) if $frozen;
5824 my $cancel_job = sub {
5825 vm_mon_cmd
($vmid, "block-job-cancel", device
=> "drive-$drive");
5827 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
5828 my $stat = @$stats[0];
5835 eval { &$cancel_job(); };
5836 die "mirroring error: $err";
5839 if ($vmiddst != $vmid) {
5840 # if we clone a disk for a new target vm, we don't switch the disk
5841 &$cancel_job(); # so we call block-job-cancel
5846 my ($storecfg, $vmid, $running, $drivename, $drive, $snapname,
5847 $newvmid, $storage, $format, $full, $newvollist) = @_;
5852 print "create linked clone of drive $drivename ($drive->{file})\n";
5853 $newvolid = PVE
::Storage
::vdisk_clone
($storecfg, $drive->{file
}, $newvmid, $snapname);
5854 push @$newvollist, $newvolid;
5856 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
});
5857 $storeid = $storage if $storage;
5859 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($storecfg, $storeid);
5861 $format = $drive->{format
} || $defFormat;
5864 # test if requested format is supported - else use default
5865 my $supported = grep { $_ eq $format } @$validFormats;
5866 $format = $defFormat if !$supported;
5868 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $drive->{file
}, 3);
5870 print "create full clone of drive $drivename ($drive->{file})\n";
5871 $newvolid = PVE
::Storage
::vdisk_alloc
($storecfg, $storeid, $newvmid, $format, undef, ($size/1024));
5872 push @$newvollist, $newvolid;
5874 if (!$running || $snapname) {
5875 qemu_img_convert
($drive->{file
}, $newvolid, $size, $snapname);
5877 qemu_drive_mirror
($vmid, $drivename, $newvolid, $newvmid);
5881 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $newvolid, 3);
5884 $disk->{format
} = undef;
5885 $disk->{file
} = $newvolid;
5886 $disk->{size
} = $size;
5891 # this only works if VM is running
5892 sub get_current_qemu_machine
{
5895 my $cmd = { execute
=> 'query-machines', arguments
=> {} };
5896 my $res = vm_qmp_command
($vmid, $cmd);
5898 my ($current, $default);
5899 foreach my $e (@$res) {
5900 $default = $e->{name
} if $e->{'is-default'};
5901 $current = $e->{name
} if $e->{'is-current'};
5904 # fallback to the default machine if current is not supported by qemu
5905 return $current || $default || 'pc';
5912 dir_glob_foreach
("$pcisysfs/devices", '[a-f0-9]{4}:([a-f0-9]{2}:[a-f0-9]{2})\.([0-9])', sub {
5913 my (undef, $id, $function) = @_;
5914 my $res = { id
=> $id, function
=> $function};
5915 push @{$devices->{$id}}, $res;