1 package PVE
::QemuServer
;
23 use Storable
qw(dclone);
25 use PVE
::Exception
qw(raise raise_param_exc);
27 use PVE
::Tools
qw(run_command lock_file lock_file_full file_read_firstline dir_glob_foreach $IPV6RE);
28 use PVE
::JSONSchema
qw(get_standard_option);
29 use PVE
::Cluster
qw(cfs_register_file cfs_read_file cfs_write_file cfs_lock_file);
34 use PVE
::RPCEnvironment
;
35 use PVE
::GuestHelpers
;
36 use PVE
::QemuServer
::PCI
qw(print_pci_addr print_pcie_addr print_pcie_root_port);
37 use PVE
::QemuServer
::Memory
;
38 use PVE
::QemuServer
::USB
qw(parse_usb_device);
39 use PVE
::QemuServer
::Cloudinit
;
42 use Time
::HiRes
qw(gettimeofday);
43 use File
::Copy
qw(copy);
46 my $EDK2_FW_BASE = '/usr/share/pve-edk2-firmware/';
49 "$EDK2_FW_BASE/OVMF_CODE.fd",
50 "$EDK2_FW_BASE/OVMF_VARS.fd"
53 "$EDK2_FW_BASE/AAVMF_CODE.fd",
54 "$EDK2_FW_BASE/AAVMF_VARS.fd"
58 my $qemu_snap_storage = { rbd
=> 1 };
60 my $cpuinfo = PVE
::ProcFSTools
::read_cpuinfo
();
62 my $QEMU_FORMAT_RE = qr/raw|cow|qcow|qcow2|qed|vmdk|cloop/;
64 # Note about locking: we use flock on the config file protect
65 # against concurent actions.
66 # Aditionaly, we have a 'lock' setting in the config file. This
67 # can be set to 'migrate', 'backup', 'snapshot' or 'rollback'. Most actions are not
68 # allowed when such lock is set. But you can ignore this kind of
69 # lock with the --skiplock flag.
71 cfs_register_file
('/qemu-server/',
75 PVE
::JSONSchema
::register_standard_option
('pve-qm-stateuri', {
76 description
=> "Some command save/restore state from this location.",
82 PVE
::JSONSchema
::register_standard_option
('pve-qm-image-format', {
84 enum
=> [qw(raw cow qcow qed qcow2 vmdk cloop)],
85 description
=> "The drive's backing file's data format.",
89 PVE
::JSONSchema
::register_standard_option
('pve-qemu-machine', {
90 description
=> "Specifies the Qemu machine type.",
92 pattern
=> '(pc|pc(-i440fx)?-\d+\.\d+(\.pxe)?|q35|pc-q35-\d+\.\d+(\.pxe)?|virt(?:-\d+\.\d+)?)',
97 #no warnings 'redefine';
100 my ($controller, $vmid, $option, $value) = @_;
102 my $path = "/sys/fs/cgroup/$controller/qemu.slice/$vmid.scope/$option";
103 PVE
::ProcFSTools
::write_proc_entry
($path, $value);
107 my $nodename = PVE
::INotify
::nodename
();
109 mkdir "/etc/pve/nodes/$nodename";
110 my $confdir = "/etc/pve/nodes/$nodename/qemu-server";
113 my $var_run_tmpdir = "/var/run/qemu-server";
114 mkdir $var_run_tmpdir;
116 my $lock_dir = "/var/lock/qemu-server";
119 my $cpu_vendor_list = {
121 486 => 'GenuineIntel',
122 pentium
=> 'GenuineIntel',
123 pentium2
=> 'GenuineIntel',
124 pentium3
=> 'GenuineIntel',
125 coreduo
=> 'GenuineIntel',
126 core2duo
=> 'GenuineIntel',
127 Conroe
=> 'GenuineIntel',
128 Penryn
=> 'GenuineIntel',
129 Nehalem
=> 'GenuineIntel',
130 'Nehalem-IBRS' => 'GenuineIntel',
131 Westmere
=> 'GenuineIntel',
132 'Westmere-IBRS' => 'GenuineIntel',
133 SandyBridge
=> 'GenuineIntel',
134 'SandyBridge-IBRS' => 'GenuineIntel',
135 IvyBridge
=> 'GenuineIntel',
136 'IvyBridge-IBRS' => 'GenuineIntel',
137 Haswell
=> 'GenuineIntel',
138 'Haswell-IBRS' => 'GenuineIntel',
139 'Haswell-noTSX' => 'GenuineIntel',
140 'Haswell-noTSX-IBRS' => 'GenuineIntel',
141 Broadwell
=> 'GenuineIntel',
142 'Broadwell-IBRS' => 'GenuineIntel',
143 'Broadwell-noTSX' => 'GenuineIntel',
144 'Broadwell-noTSX-IBRS' => 'GenuineIntel',
145 'Skylake-Client' => 'GenuineIntel',
146 'Skylake-Client-IBRS' => 'GenuineIntel',
147 'Skylake-Server' => 'GenuineIntel',
148 'Skylake-Server-IBRS' => 'GenuineIntel',
149 'Cascadelake-Server' => 'GenuineIntel',
150 KnightsMill
=> 'GenuineIntel',
154 athlon
=> 'AuthenticAMD',
155 phenom
=> 'AuthenticAMD',
156 Opteron_G1
=> 'AuthenticAMD',
157 Opteron_G2
=> 'AuthenticAMD',
158 Opteron_G3
=> 'AuthenticAMD',
159 Opteron_G4
=> 'AuthenticAMD',
160 Opteron_G5
=> 'AuthenticAMD',
161 EPYC
=> 'AuthenticAMD',
162 'EPYC-IBPB' => 'AuthenticAMD',
164 # generic types, use vendor from host node
173 my @supported_cpu_flags = (
187 my $cpu_flag = qr/[+-](@{[join('|', @supported_cpu_flags)]})/;
191 description
=> "Emulated CPU type.",
193 enum
=> [ sort { "\L$a" cmp "\L$b" } keys %$cpu_vendor_list ],
198 description
=> "Do not identify as a KVM virtual machine.",
205 pattern
=> qr/[a-zA-Z0-9]{1,12}/,
206 format_description
=> 'vendor-id',
207 description
=> 'The Hyper-V vendor ID. Some drivers or programs inside Windows guests need a specific ID.',
211 description
=> "List of additional CPU flags separated by ';'."
212 . " Use '+FLAG' to enable, '-FLAG' to disable a flag."
213 . " Currently supported flags: @{[join(', ', @supported_cpu_flags)]}.",
214 format_description
=> '+FLAG[;-FLAG...]',
216 pattern
=> qr/$cpu_flag(;$cpu_flag)*/,
225 enum
=> [qw(i6300esb ib700)],
226 description
=> "Watchdog type to emulate.",
227 default => 'i6300esb',
232 enum
=> [qw(reset shutdown poweroff pause debug none)],
233 description
=> "The action to perform if after activation the guest fails to poll the watchdog in time.",
237 PVE
::JSONSchema
::register_format
('pve-qm-watchdog', $watchdog_fmt);
241 description
=> "Enable/disable Qemu GuestAgent.",
246 fstrim_cloned_disks
=> {
247 description
=> "Run fstrim after cloning/moving a disk.",
256 description
=> "Select the VGA type.",
261 enum
=> [qw(cirrus qxl qxl2 qxl3 qxl4 none serial0 serial1 serial2 serial3 std virtio vmware)],
264 description
=> "Sets the VGA memory (in MiB). Has no effect with serial display.",
276 description
=> "The size of the file in MB.",
280 pattern
=> '[a-zA-Z0-9\-]+',
282 format_description
=> 'string',
283 description
=> "The name of the file. Will be prefixed with 'pve-shm-'. Default is the VMID. Will be deleted when the VM is stopped.",
290 enum
=> [qw(ich9-intel-hda intel-hda AC97)],
291 description
=> "Configure an audio device."
298 description
=> "Driver backend for the audio device."
302 my $spice_enhancements_fmt = {
307 description
=> "Enable folder sharing via SPICE. Needs Spice-WebDAV daemon installed in the VM."
311 enum
=> ['off', 'all', 'filter'],
314 description
=> "Enable video streaming. Uses compression for detected video streams."
322 description
=> "Specifies whether a VM will be started during system bootup.",
328 description
=> "Automatic restart after crash (currently ignored).",
333 type
=> 'string', format
=> 'pve-hotplug-features',
334 description
=> "Selectively enable hotplug features. This is a comma separated list of hotplug features: 'network', 'disk', 'cpu', 'memory' and 'usb'. Use '0' to disable hotplug completely. Value '1' is an alias for the default 'network,disk,usb'.",
335 default => 'network,disk,usb',
340 description
=> "Allow reboot. If set to '0' the VM exit on reboot.",
346 description
=> "Lock/unlock the VM.",
347 enum
=> [qw(backup clone create migrate rollback snapshot snapshot-delete suspending suspended)],
352 description
=> "Limit of CPU usage.",
353 verbose_description
=> "Limit of CPU usage.\n\nNOTE: If the computer has 2 CPUs, it has total of '2' CPU time. Value '0' indicates no CPU limit.",
361 description
=> "CPU weight for a VM.",
362 verbose_description
=> "CPU weight for a VM. Argument is used in the kernel fair scheduler. The larger the number is, the more CPU time this VM gets. Number is relative to weights of all the other running VMs.",
370 description
=> "Amount of RAM for the VM in MB. This is the maximum available memory when you use the balloon device.",
377 description
=> "Amount of target RAM for the VM in MB. Using zero disables the ballon driver.",
383 description
=> "Amount of memory shares for auto-ballooning. The larger the number is, the more memory this VM gets. Number is relative to weights of all other running VMs. Using zero disables auto-ballooning. Auto-ballooning is done by pvestatd.",
391 description
=> "Keybord layout for vnc server. Default is read from the '/etc/pve/datacenter.cfg' configuration file.".
392 "It should not be necessary to set it.",
393 enum
=> PVE
::Tools
::kvmkeymaplist
(),
398 type
=> 'string', format
=> 'dns-name',
399 description
=> "Set a name for the VM. Only used on the configuration web interface.",
404 description
=> "SCSI controller model",
405 enum
=> [qw(lsi lsi53c810 virtio-scsi-pci virtio-scsi-single megasas pvscsi)],
411 description
=> "Description for the VM. Only used on the configuration web interface. This is saved as comment inside the configuration file.",
416 enum
=> [qw(other wxp w2k w2k3 w2k8 wvista win7 win8 win10 l24 l26 solaris)],
417 description
=> "Specify guest operating system.",
418 verbose_description
=> <<EODESC,
419 Specify guest operating system. This is used to enable special
420 optimization/features for specific operating systems:
423 other;; unspecified OS
424 wxp;; Microsoft Windows XP
425 w2k;; Microsoft Windows 2000
426 w2k3;; Microsoft Windows 2003
427 w2k8;; Microsoft Windows 2008
428 wvista;; Microsoft Windows Vista
429 win7;; Microsoft Windows 7
430 win8;; Microsoft Windows 8/2012/2012r2
431 win10;; Microsoft Windows 10/2016
432 l24;; Linux 2.4 Kernel
433 l26;; Linux 2.6/3.X Kernel
434 solaris;; Solaris/OpenSolaris/OpenIndiania kernel
440 description
=> "Boot on floppy (a), hard disk (c), CD-ROM (d), or network (n).",
441 pattern
=> '[acdn]{1,4}',
446 type
=> 'string', format
=> 'pve-qm-bootdisk',
447 description
=> "Enable booting from specified disk.",
448 pattern
=> '(ide|sata|scsi|virtio)\d+',
453 description
=> "The number of CPUs. Please use option -sockets instead.",
460 description
=> "The number of CPU sockets.",
467 description
=> "The number of cores per socket.",
474 description
=> "Enable/disable NUMA.",
480 description
=> "Enable/disable hugepages memory.",
481 enum
=> [qw(any 2 1024)],
486 description
=> "Number of hotplugged vcpus.",
493 description
=> "Enable/disable ACPI.",
498 description
=> "Enable/disable Qemu GuestAgent and its properties.",
500 format
=> $agent_fmt,
505 description
=> "Enable/disable KVM hardware virtualization.",
511 description
=> "Enable/disable time drift fix.",
517 description
=> "Set the real time clock to local time. This is enabled by default if ostype indicates a Microsoft OS.",
522 description
=> "Freeze CPU at startup (use 'c' monitor command to start execution).",
526 type
=> 'string', format
=> $vga_fmt,
527 description
=> "Configure the VGA hardware.",
528 verbose_description
=> "Configure the VGA Hardware. If you want to use ".
529 "high resolution modes (>= 1280x1024x16) you may need to increase " .
530 "the vga memory option. Since QEMU 2.9 the default VGA display type " .
531 "is 'std' for all OS types besides some Windows versions (XP and " .
532 "older) which use 'cirrus'. The 'qxl' option enables the SPICE " .
533 "display server. For win* OS you can select how many independent " .
534 "displays you want, Linux guests can add displays them self.\n".
535 "You can also run without any graphic card, using a serial device as terminal.",
539 type
=> 'string', format
=> 'pve-qm-watchdog',
540 description
=> "Create a virtual hardware watchdog device.",
541 verbose_description
=> "Create a virtual hardware watchdog device. Once enabled" .
542 " (by a guest action), the watchdog must be periodically polled " .
543 "by an agent inside the guest or else the watchdog will reset " .
544 "the guest (or execute the respective action specified)",
549 typetext
=> "(now | YYYY-MM-DD | YYYY-MM-DDTHH:MM:SS)",
550 description
=> "Set the initial date of the real time clock. Valid format for date are: 'now' or '2006-06-17T16:01:21' or '2006-06-17'.",
551 pattern
=> '(now|\d{4}-\d{1,2}-\d{1,2}(T\d{1,2}:\d{1,2}:\d{1,2})?)',
554 startup
=> get_standard_option
('pve-startup-order'),
558 description
=> "Enable/disable Template.",
564 description
=> "Arbitrary arguments passed to kvm.",
565 verbose_description
=> <<EODESCR,
566 Arbitrary arguments passed to kvm, for example:
568 args: -no-reboot -no-hpet
570 NOTE: this option is for experts only.
577 description
=> "Enable/disable the USB tablet device.",
578 verbose_description
=> "Enable/disable the USB tablet device. This device is " .
579 "usually needed to allow absolute mouse positioning with VNC. " .
580 "Else the mouse runs out of sync with normal VNC clients. " .
581 "If you're running lots of console-only guests on one host, " .
582 "you may consider disabling this to save some context switches. " .
583 "This is turned off by default if you use spice (-vga=qxl).",
588 description
=> "Set maximum speed (in MB/s) for migrations. Value 0 is no limit.",
592 migrate_downtime
=> {
595 description
=> "Set maximum tolerated downtime (in seconds) for migrations.",
601 type
=> 'string', format
=> 'pve-qm-ide',
602 typetext
=> '<volume>',
603 description
=> "This is an alias for option -ide2",
607 description
=> "Emulated CPU type.",
611 parent
=> get_standard_option
('pve-snapshot-name', {
613 description
=> "Parent snapshot name. This is used internally, and should not be modified.",
617 description
=> "Timestamp for snapshots.",
623 type
=> 'string', format
=> 'pve-volume-id',
624 description
=> "Reference to a volume which stores the VM state. This is used internally for snapshots.",
626 vmstatestorage
=> get_standard_option
('pve-storage-id', {
627 description
=> "Default storage for VM state volumes/files.",
630 runningmachine
=> get_standard_option
('pve-qemu-machine', {
631 description
=> "Specifies the Qemu machine type of the running vm. This is used internally for snapshots.",
633 machine
=> get_standard_option
('pve-qemu-machine'),
635 description
=> "Virtual processor architecture. Defaults to the host.",
638 enum
=> [qw(x86_64 aarch64)],
641 description
=> "Specify SMBIOS type 1 fields.",
642 type
=> 'string', format
=> 'pve-qm-smbios1',
649 description
=> "Sets the protection flag of the VM. This will disable the remove VM and remove disk operations.",
655 enum
=> [ qw(seabios ovmf) ],
656 description
=> "Select BIOS implementation.",
657 default => 'seabios',
661 pattern
=> '(?:[a-fA-F0-9]{8}(?:-[a-fA-F0-9]{4}){3}-[a-fA-F0-9]{12}|[01])',
662 format_description
=> 'UUID',
663 description
=> "Set VM Generation ID. Use '1' to autogenerate on create or update, pass '0' to disable explicitly.",
664 verbose_description
=> "The VM generation ID (vmgenid) device exposes a".
665 " 128-bit integer value identifier to the guest OS. This allows to".
666 " notify the guest operating system when the virtual machine is".
667 " executed with a different configuration (e.g. snapshot execution".
668 " or creation from a template). The guest operating system notices".
669 " the change, and is then able to react as appropriate by marking".
670 " its copies of distributed databases as dirty, re-initializing its".
671 " random number generator, etc.\n".
672 "Note that auto-creation only works when done throug API/CLI create".
673 " or update methods, but not when manually editing the config file.",
674 default => "1 (autogenerated)",
679 format
=> 'pve-volume-id',
681 description
=> "Script that will be executed during various steps in the vms lifetime.",
685 format
=> $ivshmem_fmt,
686 description
=> "Inter-VM shared memory. Useful for direct communication between VMs, or to the host.",
691 format
=> $audio_fmt,
692 description
=> "Configure a audio device, useful in combination with QXL/Spice.",
695 spice_enhancements
=> {
697 format
=> $spice_enhancements_fmt,
698 description
=> "Configure additional enhancements for SPICE.",
707 description
=> 'Specify a custom file containing all meta data passed to the VM via cloud-init. This is provider specific meaning configdrive2 and nocloud differ.',
708 format
=> 'pve-volume-id',
709 format_description
=> 'volume',
714 description
=> 'Specify a custom file containing all network data passed to the VM via cloud-init.',
715 format
=> 'pve-volume-id',
716 format_description
=> 'volume',
721 description
=> 'Specify a custom file containing all user data passed to the VM via cloud-init.',
722 format
=> 'pve-volume-id',
723 format_description
=> 'volume',
726 PVE
::JSONSchema
::register_format
('pve-qm-cicustom', $cicustom_fmt);
728 my $confdesc_cloudinit = {
732 description
=> 'Specifies the cloud-init configuration format. The default depends on the configured operating system type (`ostype`. We use the `nocloud` format for Linux, and `configdrive2` for windows.',
733 enum
=> ['configdrive2', 'nocloud'],
738 description
=> "cloud-init: User name to change ssh keys and password for instead of the image's configured default user.",
743 description
=> 'cloud-init: Password to assign the user. Using this is generally not recommended. Use ssh keys instead. Also note that older cloud-init versions do not support hashed passwords.',
748 description
=> 'cloud-init: Specify custom files to replace the automatically generated ones at start.',
749 format
=> 'pve-qm-cicustom',
754 description
=> "cloud-init: Sets DNS search domains for a container. Create will automatically use the setting from the host if neither searchdomain nor nameserver are set.",
758 type
=> 'string', format
=> 'address-list',
759 description
=> "cloud-init: Sets DNS server IP address for a container. Create will automatically use the setting from the host if neither searchdomain nor nameserver are set.",
764 format
=> 'urlencoded',
765 description
=> "cloud-init: Setup public SSH keys (one key per line, OpenSSH format).",
769 # what about other qemu settings ?
771 #machine => 'string',
784 ##soundhw => 'string',
786 while (my ($k, $v) = each %$confdesc) {
787 PVE
::JSONSchema
::register_standard_option
("pve-qm-$k", $v);
790 my $MAX_IDE_DISKS = 4;
791 my $MAX_SCSI_DISKS = 14;
792 my $MAX_VIRTIO_DISKS = 16;
793 my $MAX_SATA_DISKS = 6;
794 my $MAX_USB_DEVICES = 5;
796 my $MAX_UNUSED_DISKS = 256;
797 my $MAX_HOSTPCI_DEVICES = 16;
798 my $MAX_SERIAL_PORTS = 4;
799 my $MAX_PARALLEL_PORTS = 3;
805 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
806 description
=> "CPUs accessing this NUMA node.",
807 format_description
=> "id[-id];...",
811 description
=> "Amount of memory this NUMA node provides.",
816 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
817 description
=> "Host NUMA nodes to use.",
818 format_description
=> "id[-id];...",
823 enum
=> [qw(preferred bind interleave)],
824 description
=> "NUMA allocation policy.",
828 PVE
::JSONSchema
::register_format
('pve-qm-numanode', $numa_fmt);
831 type
=> 'string', format
=> $numa_fmt,
832 description
=> "NUMA topology.",
834 PVE
::JSONSchema
::register_standard_option
("pve-qm-numanode", $numadesc);
836 for (my $i = 0; $i < $MAX_NUMA; $i++) {
837 $confdesc->{"numa$i"} = $numadesc;
840 my $nic_model_list = ['rtl8139', 'ne2k_pci', 'e1000', 'pcnet', 'virtio',
841 'ne2k_isa', 'i82551', 'i82557b', 'i82559er', 'vmxnet3',
842 'e1000-82540em', 'e1000-82544gc', 'e1000-82545em'];
843 my $nic_model_list_txt = join(' ', sort @$nic_model_list);
845 my $net_fmt_bridge_descr = <<__EOD__;
846 Bridge to attach the network device to. The Proxmox VE standard bridge
849 If you do not specify a bridge, we create a kvm user (NATed) network
850 device, which provides DHCP and DNS services. The following addresses
857 The DHCP server assign addresses to the guest starting from 10.0.2.15.
861 macaddr
=> get_standard_option
('mac-addr', {
862 description
=> "MAC address. That address must be unique withing your network. This is automatically generated if not specified.",
866 description
=> "Network Card Model. The 'virtio' model provides the best performance with very low CPU overhead. If your guest does not support this driver, it is usually best to use 'e1000'.",
867 enum
=> $nic_model_list,
870 (map { $_ => { keyAlias
=> 'model', alias
=> 'macaddr' }} @$nic_model_list),
873 description
=> $net_fmt_bridge_descr,
874 format_description
=> 'bridge',
879 minimum
=> 0, maximum
=> 16,
880 description
=> 'Number of packet queues to be used on the device.',
886 description
=> "Rate limit in mbps (megabytes per second) as floating point number.",
891 minimum
=> 1, maximum
=> 4094,
892 description
=> 'VLAN tag to apply to packets on this interface.',
897 pattern
=> qr/\d+(?:-\d+)?(?:;\d+(?:-\d+)?)*/,
898 description
=> 'VLAN trunks to pass through this interface.',
899 format_description
=> 'vlanid[;vlanid...]',
904 description
=> 'Whether this interface should be protected by the firewall.',
909 description
=> 'Whether this interface should be disconnected (like pulling the plug).',
916 type
=> 'string', format
=> $net_fmt,
917 description
=> "Specify network devices.",
920 PVE
::JSONSchema
::register_standard_option
("pve-qm-net", $netdesc);
925 format
=> 'pve-ipv4-config',
926 format_description
=> 'IPv4Format/CIDR',
927 description
=> 'IPv4 address in CIDR format.',
934 format_description
=> 'GatewayIPv4',
935 description
=> 'Default gateway for IPv4 traffic.',
941 format
=> 'pve-ipv6-config',
942 format_description
=> 'IPv6Format/CIDR',
943 description
=> 'IPv6 address in CIDR format.',
950 format_description
=> 'GatewayIPv6',
951 description
=> 'Default gateway for IPv6 traffic.',
956 PVE
::JSONSchema
::register_format
('pve-qm-ipconfig', $ipconfig_fmt);
959 type
=> 'string', format
=> 'pve-qm-ipconfig',
960 description
=> <<'EODESCR',
961 cloud-init: Specify IP addresses and gateways for the corresponding interface.
963 IP addresses use CIDR notation, gateways are optional but need an IP of the same type specified.
965 The special string 'dhcp' can be used for IP addresses to use DHCP, in which case no explicit gateway should be provided.
966 For IPv6 the special string 'auto' can be used to use stateless autoconfiguration.
968 If cloud-init is enabled and neither an IPv4 nor an IPv6 address is specified, it defaults to using dhcp on IPv4.
971 PVE
::JSONSchema
::register_standard_option
("pve-qm-ipconfig", $netdesc);
973 for (my $i = 0; $i < $MAX_NETS; $i++) {
974 $confdesc->{"net$i"} = $netdesc;
975 $confdesc_cloudinit->{"ipconfig$i"} = $ipconfigdesc;
978 foreach my $key (keys %$confdesc_cloudinit) {
979 $confdesc->{$key} = $confdesc_cloudinit->{$key};
982 PVE
::JSONSchema
::register_format
('pve-volume-id-or-qm-path', \
&verify_volume_id_or_qm_path
);
983 sub verify_volume_id_or_qm_path
{
984 my ($volid, $noerr) = @_;
986 if ($volid eq 'none' || $volid eq 'cdrom' || $volid =~ m
|^/|) {
990 # if its neither 'none' nor 'cdrom' nor a path, check if its a volume-id
991 $volid = eval { PVE
::JSONSchema
::check_format
('pve-volume-id', $volid, '') };
993 return undef if $noerr;
1001 my %drivedesc_base = (
1002 volume
=> { alias
=> 'file' },
1005 format
=> 'pve-volume-id-or-qm-path',
1007 format_description
=> 'volume',
1008 description
=> "The drive's backing volume.",
1012 enum
=> [qw(cdrom disk)],
1013 description
=> "The drive's media type.",
1019 description
=> "Force the drive's physical geometry to have a specific cylinder count.",
1024 description
=> "Force the drive's physical geometry to have a specific head count.",
1029 description
=> "Force the drive's physical geometry to have a specific sector count.",
1034 enum
=> [qw(none lba auto)],
1035 description
=> "Force disk geometry bios translation mode.",
1040 description
=> "Controls qemu's snapshot mode feature."
1041 . " If activated, changes made to the disk are temporary and will"
1042 . " be discarded when the VM is shutdown.",
1047 enum
=> [qw(none writethrough writeback unsafe directsync)],
1048 description
=> "The drive's cache mode",
1051 format
=> get_standard_option
('pve-qm-image-format'),
1054 format
=> 'disk-size',
1055 format_description
=> 'DiskSize',
1056 description
=> "Disk size. This is purely informational and has no effect.",
1061 description
=> "Whether the drive should be included when making backups.",
1066 description
=> 'Whether the drive should considered for replication jobs.',
1072 enum
=> [qw(ignore report stop)],
1073 description
=> 'Read error action.',
1078 enum
=> [qw(enospc ignore report stop)],
1079 description
=> 'Write error action.',
1084 enum
=> [qw(native threads)],
1085 description
=> 'AIO type to use.',
1090 enum
=> [qw(ignore on)],
1091 description
=> 'Controls whether to pass discard/trim requests to the underlying storage.',
1096 description
=> 'Controls whether to detect and try to optimize writes of zeroes.',
1101 format
=> 'urlencoded',
1102 format_description
=> 'serial',
1103 maxLength
=> 20*3, # *3 since it's %xx url enoded
1104 description
=> "The drive's reported serial number, url-encoded, up to 20 bytes long.",
1109 description
=> 'Mark this locally-managed volume as available on all nodes',
1110 verbose_description
=> "Mark this locally-managed volume as available on all nodes.\n\nWARNING: This option does not share the volume automatically, it assumes it is shared already!",
1116 my %iothread_fmt = ( iothread
=> {
1118 description
=> "Whether to use iothreads for this drive",
1125 format
=> 'urlencoded',
1126 format_description
=> 'model',
1127 maxLength
=> 40*3, # *3 since it's %xx url enoded
1128 description
=> "The drive's reported model name, url-encoded, up to 40 bytes long.",
1136 description
=> "Number of queues.",
1142 my %scsiblock_fmt = (
1145 description
=> "whether to use scsi-block for full passthrough of host block device\n\nWARNING: can lead to I/O errors in combination with low memory or high memory fragmentation on host",
1154 description
=> "Whether to expose this drive as an SSD, rather than a rotational hard disk.",
1162 pattern
=> qr/^(0x)[0-9a-fA-F]{16}/,
1163 format_description
=> 'wwn',
1164 description
=> "The drive's worldwide name, encoded as 16 bytes hex string, prefixed by '0x'.",
1169 my $add_throttle_desc = sub {
1170 my ($key, $type, $what, $unit, $longunit, $minimum) = @_;
1173 format_description
=> $unit,
1174 description
=> "Maximum $what in $longunit.",
1177 $d->{minimum
} = $minimum if defined($minimum);
1178 $drivedesc_base{$key} = $d;
1180 # throughput: (leaky bucket)
1181 $add_throttle_desc->('bps', 'integer', 'r/w speed', 'bps', 'bytes per second');
1182 $add_throttle_desc->('bps_rd', 'integer', 'read speed', 'bps', 'bytes per second');
1183 $add_throttle_desc->('bps_wr', 'integer', 'write speed', 'bps', 'bytes per second');
1184 $add_throttle_desc->('mbps', 'number', 'r/w speed', 'mbps', 'megabytes per second');
1185 $add_throttle_desc->('mbps_rd', 'number', 'read speed', 'mbps', 'megabytes per second');
1186 $add_throttle_desc->('mbps_wr', 'number', 'write speed', 'mbps', 'megabytes per second');
1187 $add_throttle_desc->('iops', 'integer', 'r/w I/O', 'iops', 'operations per second');
1188 $add_throttle_desc->('iops_rd', 'integer', 'read I/O', 'iops', 'operations per second');
1189 $add_throttle_desc->('iops_wr', 'integer', 'write I/O', 'iops', 'operations per second');
1191 # pools: (pool of IO before throttling starts taking effect)
1192 $add_throttle_desc->('mbps_max', 'number', 'unthrottled r/w pool', 'mbps', 'megabytes per second');
1193 $add_throttle_desc->('mbps_rd_max', 'number', 'unthrottled read pool', 'mbps', 'megabytes per second');
1194 $add_throttle_desc->('mbps_wr_max', 'number', 'unthrottled write pool', 'mbps', 'megabytes per second');
1195 $add_throttle_desc->('iops_max', 'integer', 'unthrottled r/w I/O pool', 'iops', 'operations per second');
1196 $add_throttle_desc->('iops_rd_max', 'integer', 'unthrottled read I/O pool', 'iops', 'operations per second');
1197 $add_throttle_desc->('iops_wr_max', 'integer', 'unthrottled write I/O pool', 'iops', 'operations per second');
1200 $add_throttle_desc->('bps_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
1201 $add_throttle_desc->('bps_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
1202 $add_throttle_desc->('bps_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
1203 $add_throttle_desc->('iops_max_length', 'integer', 'length of I/O bursts', 'seconds', 'seconds', 1);
1204 $add_throttle_desc->('iops_rd_max_length', 'integer', 'length of read I/O bursts', 'seconds', 'seconds', 1);
1205 $add_throttle_desc->('iops_wr_max_length', 'integer', 'length of write I/O bursts', 'seconds', 'seconds', 1);
1208 $drivedesc_base{'bps_rd_length'} = { alias
=> 'bps_rd_max_length' };
1209 $drivedesc_base{'bps_wr_length'} = { alias
=> 'bps_wr_max_length' };
1210 $drivedesc_base{'iops_rd_length'} = { alias
=> 'iops_rd_max_length' };
1211 $drivedesc_base{'iops_wr_length'} = { alias
=> 'iops_wr_max_length' };
1219 PVE
::JSONSchema
::register_format
("pve-qm-ide", $ide_fmt);
1223 type
=> 'string', format
=> $ide_fmt,
1224 description
=> "Use volume as IDE hard disk or CD-ROM (n is 0 to " .($MAX_IDE_DISKS -1) . ").",
1226 PVE
::JSONSchema
::register_standard_option
("pve-qm-ide", $idedesc);
1238 type
=> 'string', format
=> $scsi_fmt,
1239 description
=> "Use volume as SCSI hard disk or CD-ROM (n is 0 to " . ($MAX_SCSI_DISKS - 1) . ").",
1241 PVE
::JSONSchema
::register_standard_option
("pve-qm-scsi", $scsidesc);
1250 type
=> 'string', format
=> $sata_fmt,
1251 description
=> "Use volume as SATA hard disk or CD-ROM (n is 0 to " . ($MAX_SATA_DISKS - 1). ").",
1253 PVE
::JSONSchema
::register_standard_option
("pve-qm-sata", $satadesc);
1261 type
=> 'string', format
=> $virtio_fmt,
1262 description
=> "Use volume as VIRTIO hard disk (n is 0 to " . ($MAX_VIRTIO_DISKS - 1) . ").",
1264 PVE
::JSONSchema
::register_standard_option
("pve-qm-virtio", $virtiodesc);
1266 my $alldrive_fmt = {
1277 volume
=> { alias
=> 'file' },
1280 format
=> 'pve-volume-id-or-qm-path',
1282 format_description
=> 'volume',
1283 description
=> "The drive's backing volume.",
1285 format
=> get_standard_option
('pve-qm-image-format'),
1288 format
=> 'disk-size',
1289 format_description
=> 'DiskSize',
1290 description
=> "Disk size. This is purely informational and has no effect.",
1295 my $efidisk_desc = {
1297 type
=> 'string', format
=> $efidisk_fmt,
1298 description
=> "Configure a Disk for storing EFI vars",
1301 PVE
::JSONSchema
::register_standard_option
("pve-qm-efidisk", $efidisk_desc);
1306 type
=> 'string', format
=> 'pve-qm-usb-device',
1307 format_description
=> 'HOSTUSBDEVICE|spice',
1308 description
=> <<EODESCR,
1309 The Host USB device or port or the value 'spice'. HOSTUSBDEVICE syntax is:
1311 'bus-port(.port)*' (decimal numbers) or
1312 'vendor_id:product_id' (hexadeciaml numbers) or
1315 You can use the 'lsusb -t' command to list existing usb devices.
1317 NOTE: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
1319 The value 'spice' can be used to add a usb redirection devices for spice.
1325 description
=> "Specifies whether if given host option is a USB3 device or port.",
1332 type
=> 'string', format
=> $usb_fmt,
1333 description
=> "Configure an USB device (n is 0 to 4).",
1335 PVE
::JSONSchema
::register_standard_option
("pve-qm-usb", $usbdesc);
1337 my $PCIRE = qr/[a-f0-9]{2}:[a-f0-9]{2}(?:\.[a-f0-9])?/;
1342 pattern
=> qr/$PCIRE(;$PCIRE)*/,
1343 format_description
=> 'HOSTPCIID[;HOSTPCIID2...]',
1344 description
=> <<EODESCR,
1345 Host PCI device pass through. The PCI ID of a host's PCI device or a list
1346 of PCI virtual functions of the host. HOSTPCIID syntax is:
1348 'bus:dev.func' (hexadecimal numbers)
1350 You can us the 'lspci' command to list existing PCI devices.
1355 description
=> "Specify whether or not the device's ROM will be visible in the guest's memory map.",
1361 pattern
=> '[^,;]+',
1362 format_description
=> 'string',
1363 description
=> "Custom pci device rom filename (must be located in /usr/share/kvm/).",
1368 description
=> "Choose the PCI-express bus (needs the 'q35' machine model).",
1374 description
=> "Enable vfio-vga device support.",
1380 format_description
=> 'string',
1381 pattern
=> '[^/\.:]+',
1383 description
=> <<EODESCR
1384 The type of mediated device to use.
1385 An instance of this type will be created on startup of the VM and
1386 will be cleaned up when the VM stops.
1390 PVE
::JSONSchema
::register_format
('pve-qm-hostpci', $hostpci_fmt);
1394 type
=> 'string', format
=> 'pve-qm-hostpci',
1395 description
=> "Map host PCI devices into guest.",
1396 verbose_description
=> <<EODESCR,
1397 Map host PCI devices into guest.
1399 NOTE: This option allows direct access to host hardware. So it is no longer
1400 possible to migrate such machines - use with special care.
1402 CAUTION: Experimental! User reported problems with this option.
1405 PVE
::JSONSchema
::register_standard_option
("pve-qm-hostpci", $hostpcidesc);
1410 pattern
=> '(/dev/.+|socket)',
1411 description
=> "Create a serial device inside the VM (n is 0 to 3)",
1412 verbose_description
=> <<EODESCR,
1413 Create a serial device inside the VM (n is 0 to 3), and pass through a
1414 host serial device (i.e. /dev/ttyS0), or create a unix socket on the
1415 host side (use 'qm terminal' to open a terminal connection).
1417 NOTE: If you pass through a host serial device, it is no longer possible to migrate such machines - use with special care.
1419 CAUTION: Experimental! User reported problems with this option.
1426 pattern
=> '/dev/parport\d+|/dev/usb/lp\d+',
1427 description
=> "Map host parallel devices (n is 0 to 2).",
1428 verbose_description
=> <<EODESCR,
1429 Map host parallel devices (n is 0 to 2).
1431 NOTE: This option allows direct access to host hardware. So it is no longer possible to migrate such machines - use with special care.
1433 CAUTION: Experimental! User reported problems with this option.
1437 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
1438 $confdesc->{"parallel$i"} = $paralleldesc;
1441 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
1442 $confdesc->{"serial$i"} = $serialdesc;
1445 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
1446 $confdesc->{"hostpci$i"} = $hostpcidesc;
1449 for (my $i = 0; $i < $MAX_IDE_DISKS; $i++) {
1450 $drivename_hash->{"ide$i"} = 1;
1451 $confdesc->{"ide$i"} = $idedesc;
1454 for (my $i = 0; $i < $MAX_SATA_DISKS; $i++) {
1455 $drivename_hash->{"sata$i"} = 1;
1456 $confdesc->{"sata$i"} = $satadesc;
1459 for (my $i = 0; $i < $MAX_SCSI_DISKS; $i++) {
1460 $drivename_hash->{"scsi$i"} = 1;
1461 $confdesc->{"scsi$i"} = $scsidesc ;
1464 for (my $i = 0; $i < $MAX_VIRTIO_DISKS; $i++) {
1465 $drivename_hash->{"virtio$i"} = 1;
1466 $confdesc->{"virtio$i"} = $virtiodesc;
1469 $drivename_hash->{efidisk0
} = 1;
1470 $confdesc->{efidisk0
} = $efidisk_desc;
1472 for (my $i = 0; $i < $MAX_USB_DEVICES; $i++) {
1473 $confdesc->{"usb$i"} = $usbdesc;
1478 type
=> 'string', format
=> 'pve-volume-id',
1479 description
=> "Reference to unused volumes. This is used internally, and should not be modified manually.",
1482 for (my $i = 0; $i < $MAX_UNUSED_DISKS; $i++) {
1483 $confdesc->{"unused$i"} = $unuseddesc;
1486 my $kvm_api_version = 0;
1489 return $kvm_api_version if $kvm_api_version;
1491 open my $fh, '<', '/dev/kvm'
1494 # 0xae00 => KVM_GET_API_VERSION
1495 $kvm_api_version = ioctl($fh, 0xae00, 0);
1497 return $kvm_api_version;
1500 my $kvm_user_version = {};
1503 sub kvm_user_version
{
1506 $binary //= get_command_for_arch
(get_host_arch
()); # get the native arch by default
1507 my $st = stat($binary);
1509 my $cachedmtime = $kvm_mtime->{$binary} // -1;
1510 return $kvm_user_version->{$binary} if $kvm_user_version->{$binary} &&
1511 $cachedmtime == $st->mtime;
1513 $kvm_user_version->{$binary} = 'unknown';
1514 $kvm_mtime->{$binary} = $st->mtime;
1518 if ($line =~ m/^QEMU( PC)? emulator version (\d+\.\d+(\.\d+)?)(\.\d+)?[,\s]/) {
1519 $kvm_user_version->{$binary} = $2;
1523 eval { run_command
([$binary, '--version'], outfunc
=> $code); };
1526 return $kvm_user_version->{$binary};
1530 sub kernel_has_vhost_net
{
1531 return -c
'/dev/vhost-net';
1534 sub valid_drive_names
{
1535 # order is important - used to autoselect boot disk
1536 return ((map { "ide$_" } (0 .. ($MAX_IDE_DISKS - 1))),
1537 (map { "scsi$_" } (0 .. ($MAX_SCSI_DISKS - 1))),
1538 (map { "virtio$_" } (0 .. ($MAX_VIRTIO_DISKS - 1))),
1539 (map { "sata$_" } (0 .. ($MAX_SATA_DISKS - 1))),
1543 sub is_valid_drivename
{
1546 return defined($drivename_hash->{$dev});
1551 return defined($confdesc->{$key});
1555 return $nic_model_list;
1558 sub os_list_description
{
1562 wxp
=> 'Windows XP',
1563 w2k
=> 'Windows 2000',
1564 w2k3
=>, 'Windows 2003',
1565 w2k8
=> 'Windows 2008',
1566 wvista
=> 'Windows Vista',
1567 win7
=> 'Windows 7',
1568 win8
=> 'Windows 8/2012',
1569 win10
=> 'Windows 10/2016',
1577 sub get_cdrom_path
{
1579 return $cdrom_path if $cdrom_path;
1581 return $cdrom_path = "/dev/cdrom" if -l
"/dev/cdrom";
1582 return $cdrom_path = "/dev/cdrom1" if -l
"/dev/cdrom1";
1583 return $cdrom_path = "/dev/cdrom2" if -l
"/dev/cdrom2";
1587 my ($storecfg, $vmid, $cdrom) = @_;
1589 if ($cdrom eq 'cdrom') {
1590 return get_cdrom_path
();
1591 } elsif ($cdrom eq 'none') {
1593 } elsif ($cdrom =~ m
|^/|) {
1596 return PVE
::Storage
::path
($storecfg, $cdrom);
1600 # try to convert old style file names to volume IDs
1601 sub filename_to_volume_id
{
1602 my ($vmid, $file, $media) = @_;
1604 if (!($file eq 'none' || $file eq 'cdrom' ||
1605 $file =~ m
|^/dev/.+| || $file =~ m/^([^:]+):(.+)$/)) {
1607 return undef if $file =~ m
|/|;
1609 if ($media && $media eq 'cdrom') {
1610 $file = "local:iso/$file";
1612 $file = "local:$vmid/$file";
1619 sub verify_media_type
{
1620 my ($opt, $vtype, $media) = @_;
1625 if ($media eq 'disk') {
1627 } elsif ($media eq 'cdrom') {
1630 die "internal error";
1633 return if ($vtype eq $etype);
1635 raise_param_exc
({ $opt => "unexpected media type ($vtype != $etype)" });
1638 sub cleanup_drive_path
{
1639 my ($opt, $storecfg, $drive) = @_;
1641 # try to convert filesystem paths to volume IDs
1643 if (($drive->{file
} !~ m/^(cdrom|none)$/) &&
1644 ($drive->{file
} !~ m
|^/dev/.+|) &&
1645 ($drive->{file
} !~ m/^([^:]+):(.+)$/) &&
1646 ($drive->{file
} !~ m/^\d+$/)) {
1647 my ($vtype, $volid) = PVE
::Storage
::path_to_volume_id
($storecfg, $drive->{file
});
1648 raise_param_exc
({ $opt => "unable to associate path '$drive->{file}' to any storage"}) if !$vtype;
1649 $drive->{media
} = 'cdrom' if !$drive->{media
} && $vtype eq 'iso';
1650 verify_media_type
($opt, $vtype, $drive->{media
});
1651 $drive->{file
} = $volid;
1654 $drive->{media
} = 'cdrom' if !$drive->{media
} && $drive->{file
} =~ m/^(cdrom|none)$/;
1657 sub parse_hotplug_features
{
1662 return $res if $data eq '0';
1664 $data = $confdesc->{hotplug
}->{default} if $data eq '1';
1666 foreach my $feature (PVE
::Tools
::split_list
($data)) {
1667 if ($feature =~ m/^(network|disk|cpu|memory|usb)$/) {
1670 die "invalid hotplug feature '$feature'\n";
1676 PVE
::JSONSchema
::register_format
('pve-hotplug-features', \
&pve_verify_hotplug_features
);
1677 sub pve_verify_hotplug_features
{
1678 my ($value, $noerr) = @_;
1680 return $value if parse_hotplug_features
($value);
1682 return undef if $noerr;
1684 die "unable to parse hotplug option\n";
1687 # ideX = [volume=]volume-id[,media=d][,cyls=c,heads=h,secs=s[,trans=t]]
1688 # [,snapshot=on|off][,cache=on|off][,format=f][,backup=yes|no]
1689 # [,rerror=ignore|report|stop][,werror=enospc|ignore|report|stop]
1690 # [,aio=native|threads][,discard=ignore|on][,detect_zeroes=on|off]
1691 # [,iothread=on][,serial=serial][,model=model]
1694 my ($key, $data) = @_;
1696 my ($interface, $index);
1698 if ($key =~ m/^([^\d]+)(\d+)$/) {
1705 my $desc = $key =~ /^unused\d+$/ ?
$alldrive_fmt
1706 : $confdesc->{$key}->{format
};
1708 warn "invalid drive key: $key\n";
1711 my $res = eval { PVE
::JSONSchema
::parse_property_string
($desc, $data) };
1712 return undef if !$res;
1713 $res->{interface
} = $interface;
1714 $res->{index} = $index;
1717 foreach my $opt (qw(bps bps_rd bps_wr)) {
1718 if (my $bps = defined(delete $res->{$opt})) {
1719 if (defined($res->{"m$opt"})) {
1720 warn "both $opt and m$opt specified\n";
1724 $res->{"m$opt"} = sprintf("%.3f", $bps / (1024*1024.0));
1728 # can't use the schema's 'requires' because of the mbps* => bps* "transforming aliases"
1729 for my $requirement (
1730 [mbps_max
=> 'mbps'],
1731 [mbps_rd_max
=> 'mbps_rd'],
1732 [mbps_wr_max
=> 'mbps_wr'],
1733 [miops_max
=> 'miops'],
1734 [miops_rd_max
=> 'miops_rd'],
1735 [miops_wr_max
=> 'miops_wr'],
1736 [bps_max_length
=> 'mbps_max'],
1737 [bps_rd_max_length
=> 'mbps_rd_max'],
1738 [bps_wr_max_length
=> 'mbps_wr_max'],
1739 [iops_max_length
=> 'iops_max'],
1740 [iops_rd_max_length
=> 'iops_rd_max'],
1741 [iops_wr_max_length
=> 'iops_wr_max']) {
1742 my ($option, $requires) = @$requirement;
1743 if ($res->{$option} && !$res->{$requires}) {
1744 warn "$option requires $requires\n";
1749 return undef if $error;
1751 return undef if $res->{mbps_rd
} && $res->{mbps
};
1752 return undef if $res->{mbps_wr
} && $res->{mbps
};
1753 return undef if $res->{iops_rd
} && $res->{iops
};
1754 return undef if $res->{iops_wr
} && $res->{iops
};
1756 if ($res->{media
} && ($res->{media
} eq 'cdrom')) {
1757 return undef if $res->{snapshot
} || $res->{trans
} || $res->{format
};
1758 return undef if $res->{heads
} || $res->{secs
} || $res->{cyls
};
1759 return undef if $res->{interface
} eq 'virtio';
1762 if (my $size = $res->{size
}) {
1763 return undef if !defined($res->{size
} = PVE
::JSONSchema
::parse_size
($size));
1770 my ($vmid, $drive) = @_;
1771 my $data = { %$drive };
1772 delete $data->{$_} for qw(index interface);
1773 return PVE
::JSONSchema
::print_property_string
($data, $alldrive_fmt);
1777 my($fh, $noerr) = @_;
1780 my $SG_GET_VERSION_NUM = 0x2282;
1782 my $versionbuf = "\x00" x
8;
1783 my $ret = ioctl($fh, $SG_GET_VERSION_NUM, $versionbuf);
1785 die "scsi ioctl SG_GET_VERSION_NUM failoed - $!\n" if !$noerr;
1788 my $version = unpack("I", $versionbuf);
1789 if ($version < 30000) {
1790 die "scsi generic interface too old\n" if !$noerr;
1794 my $buf = "\x00" x
36;
1795 my $sensebuf = "\x00" x
8;
1796 my $cmd = pack("C x3 C x1", 0x12, 36);
1798 # see /usr/include/scsi/sg.h
1799 my $sg_io_hdr_t = "i i C C s I P P P I I i P C C C C S S i I I";
1801 my $packet = pack($sg_io_hdr_t, ord('S'), -3, length($cmd),
1802 length($sensebuf), 0, length($buf), $buf,
1803 $cmd, $sensebuf, 6000);
1805 $ret = ioctl($fh, $SG_IO, $packet);
1807 die "scsi ioctl SG_IO failed - $!\n" if !$noerr;
1811 my @res = unpack($sg_io_hdr_t, $packet);
1812 if ($res[17] || $res[18]) {
1813 die "scsi ioctl SG_IO status error - $!\n" if !$noerr;
1818 (my $byte0, my $byte1, $res->{vendor
},
1819 $res->{product
}, $res->{revision
}) = unpack("C C x6 A8 A16 A4", $buf);
1821 $res->{removable
} = $byte1 & 128 ?
1 : 0;
1822 $res->{type
} = $byte0 & 31;
1830 my $fh = IO
::File-
>new("+<$path") || return undef;
1831 my $res = scsi_inquiry
($fh, 1);
1837 sub machine_type_is_q35
{
1840 return $conf->{machine
} && ($conf->{machine
} =~ m/q35/) ?
1 : 0;
1843 sub print_tabletdevice_full
{
1844 my ($conf, $arch) = @_;
1846 my $q35 = machine_type_is_q35
($conf);
1848 # we use uhci for old VMs because tablet driver was buggy in older qemu
1850 if (machine_type_is_q35
($conf) || $arch eq 'aarch64') {
1856 return "usb-tablet,id=tablet,bus=$usbbus.0,port=1";
1859 sub print_keyboarddevice_full
{
1860 my ($conf, $arch, $machine) = @_;
1862 return undef if $arch ne 'aarch64';
1864 return "usb-kbd,id=keyboard,bus=ehci.0,port=2";
1867 sub print_drivedevice_full
{
1868 my ($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type) = @_;
1873 if ($drive->{interface
} eq 'virtio') {
1874 my $pciaddr = print_pci_addr
("$drive->{interface}$drive->{index}", $bridges, $arch, $machine_type);
1875 $device = "virtio-blk-pci,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}$pciaddr";
1876 $device .= ",iothread=iothread-$drive->{interface}$drive->{index}" if $drive->{iothread
};
1877 } elsif ($drive->{interface
} eq 'scsi') {
1879 my ($maxdev, $controller, $controller_prefix) = scsihw_infos
($conf, $drive);
1880 my $unit = $drive->{index} % $maxdev;
1881 my $devicetype = 'hd';
1883 if (drive_is_cdrom
($drive)) {
1886 if ($drive->{file
} =~ m
|^/|) {
1887 $path = $drive->{file
};
1888 if (my $info = path_is_scsi
($path)) {
1889 if ($info->{type
} == 0 && $drive->{scsiblock
}) {
1890 $devicetype = 'block';
1891 } elsif ($info->{type
} == 1) { # tape
1892 $devicetype = 'generic';
1896 $path = PVE
::Storage
::path
($storecfg, $drive->{file
});
1899 if($path =~ m/^iscsi\:\/\
//){
1900 $devicetype = 'generic';
1904 if (!$conf->{scsihw
} || ($conf->{scsihw
} =~ m/^lsi/)){
1905 $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,scsi-id=$unit,drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1907 $device = "scsi-$devicetype,bus=$controller_prefix$controller.0,channel=0,scsi-id=0,lun=$drive->{index},drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1910 if ($drive->{ssd
} && ($devicetype eq 'block' || $devicetype eq 'hd')) {
1911 $device .= ",rotation_rate=1";
1913 $device .= ",wwn=$drive->{wwn}" if $drive->{wwn
};
1915 } elsif ($drive->{interface
} eq 'ide' || $drive->{interface
} eq 'sata') {
1916 my $maxdev = ($drive->{interface
} eq 'sata') ?
$MAX_SATA_DISKS : 2;
1917 my $controller = int($drive->{index} / $maxdev);
1918 my $unit = $drive->{index} % $maxdev;
1919 my $devicetype = ($drive->{media
} && $drive->{media
} eq 'cdrom') ?
"cd" : "hd";
1921 $device = "ide-$devicetype";
1922 if ($drive->{interface
} eq 'ide') {
1923 $device .= ",bus=ide.$controller,unit=$unit";
1925 $device .= ",bus=ahci$controller.$unit";
1927 $device .= ",drive=drive-$drive->{interface}$drive->{index},id=$drive->{interface}$drive->{index}";
1929 if ($devicetype eq 'hd') {
1930 if (my $model = $drive->{model
}) {
1931 $model = URI
::Escape
::uri_unescape
($model);
1932 $device .= ",model=$model";
1934 if ($drive->{ssd
}) {
1935 $device .= ",rotation_rate=1";
1938 $device .= ",wwn=$drive->{wwn}" if $drive->{wwn
};
1939 } elsif ($drive->{interface
} eq 'usb') {
1941 # -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
1943 die "unsupported interface type";
1946 $device .= ",bootindex=$drive->{bootindex}" if $drive->{bootindex
};
1948 if (my $serial = $drive->{serial
}) {
1949 $serial = URI
::Escape
::uri_unescape
($serial);
1950 $device .= ",serial=$serial";
1957 sub get_initiator_name
{
1960 my $fh = IO
::File-
>new('/etc/iscsi/initiatorname.iscsi') || return undef;
1961 while (defined(my $line = <$fh>)) {
1962 next if $line !~ m/^\s*InitiatorName\s*=\s*([\.\-:\w]+)/;
1971 sub print_drive_full
{
1972 my ($storecfg, $vmid, $drive) = @_;
1975 my $volid = $drive->{file
};
1978 if (drive_is_cdrom
($drive)) {
1979 $path = get_iso_path
($storecfg, $vmid, $volid);
1981 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
1983 $path = PVE
::Storage
::path
($storecfg, $volid);
1984 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
1985 $format = qemu_img_format
($scfg, $volname);
1993 my @qemu_drive_options = qw(heads secs cyls trans media format cache rerror werror aio discard);
1994 foreach my $o (@qemu_drive_options) {
1995 $opts .= ",$o=$drive->{$o}" if defined($drive->{$o});
1998 # snapshot only accepts on|off
1999 if (defined($drive->{snapshot
})) {
2000 my $v = $drive->{snapshot
} ?
'on' : 'off';
2001 $opts .= ",snapshot=$v";
2004 foreach my $type (['', '-total'], [_rd
=> '-read'], [_wr
=> '-write']) {
2005 my ($dir, $qmpname) = @$type;
2006 if (my $v = $drive->{"mbps$dir"}) {
2007 $opts .= ",throttling.bps$qmpname=".int($v*1024*1024);
2009 if (my $v = $drive->{"mbps${dir}_max"}) {
2010 $opts .= ",throttling.bps$qmpname-max=".int($v*1024*1024);
2012 if (my $v = $drive->{"bps${dir}_max_length"}) {
2013 $opts .= ",throttling.bps$qmpname-max-length=$v";
2015 if (my $v = $drive->{"iops${dir}"}) {
2016 $opts .= ",throttling.iops$qmpname=$v";
2018 if (my $v = $drive->{"iops${dir}_max"}) {
2019 $opts .= ",throttling.iops$qmpname-max=$v";
2021 if (my $v = $drive->{"iops${dir}_max_length"}) {
2022 $opts .= ",throttling.iops$qmpname-max-length=$v";
2026 $opts .= ",format=$format" if $format && !$drive->{format
};
2028 my $cache_direct = 0;
2030 if (my $cache = $drive->{cache
}) {
2031 $cache_direct = $cache =~ /^(?:off|none|directsync)$/;
2032 } elsif (!drive_is_cdrom
($drive)) {
2033 $opts .= ",cache=none";
2037 # aio native works only with O_DIRECT
2038 if (!$drive->{aio
}) {
2040 $opts .= ",aio=native";
2042 $opts .= ",aio=threads";
2046 if (!drive_is_cdrom
($drive)) {
2048 if (defined($drive->{detect_zeroes
}) && !$drive->{detect_zeroes
}) {
2049 $detectzeroes = 'off';
2050 } elsif ($drive->{discard
}) {
2051 $detectzeroes = $drive->{discard
} eq 'on' ?
'unmap' : 'on';
2053 # This used to be our default with discard not being specified:
2054 $detectzeroes = 'on';
2056 $opts .= ",detect-zeroes=$detectzeroes" if $detectzeroes;
2059 my $pathinfo = $path ?
"file=$path," : '';
2061 return "${pathinfo}if=none,id=drive-$drive->{interface}$drive->{index}$opts";
2064 sub print_netdevice_full
{
2065 my ($vmid, $conf, $net, $netid, $bridges, $use_old_bios_files, $arch, $machine_type) = @_;
2067 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
2069 my $device = $net->{model
};
2070 if ($net->{model
} eq 'virtio') {
2071 $device = 'virtio-net-pci';
2074 my $pciaddr = print_pci_addr
("$netid", $bridges, $arch, $machine_type);
2075 my $tmpstr = "$device,mac=$net->{macaddr},netdev=$netid$pciaddr,id=$netid";
2076 if ($net->{queues
} && $net->{queues
} > 1 && $net->{model
} eq 'virtio'){
2077 #Consider we have N queues, the number of vectors needed is 2*N + 2 (plus one config interrupt and control vq)
2078 my $vectors = $net->{queues
} * 2 + 2;
2079 $tmpstr .= ",vectors=$vectors,mq=on";
2081 $tmpstr .= ",bootindex=$net->{bootindex}" if $net->{bootindex
} ;
2083 if ($use_old_bios_files) {
2085 if ($device eq 'virtio-net-pci') {
2086 $romfile = 'pxe-virtio.rom';
2087 } elsif ($device eq 'e1000') {
2088 $romfile = 'pxe-e1000.rom';
2089 } elsif ($device eq 'ne2k') {
2090 $romfile = 'pxe-ne2k_pci.rom';
2091 } elsif ($device eq 'pcnet') {
2092 $romfile = 'pxe-pcnet.rom';
2093 } elsif ($device eq 'rtl8139') {
2094 $romfile = 'pxe-rtl8139.rom';
2096 $tmpstr .= ",romfile=$romfile" if $romfile;
2102 sub print_netdev_full
{
2103 my ($vmid, $conf, $arch, $net, $netid, $hotplug) = @_;
2106 if ($netid =~ m/^net(\d+)$/) {
2110 die "got strange net id '$i'\n" if $i >= ${MAX_NETS
};
2112 my $ifname = "tap${vmid}i$i";
2114 # kvm uses TUNSETIFF ioctl, and that limits ifname length
2115 die "interface name '$ifname' is too long (max 15 character)\n"
2116 if length($ifname) >= 16;
2118 my $vhostparam = '';
2119 if (is_native
($arch)) {
2120 $vhostparam = ',vhost=on' if kernel_has_vhost_net
() && $net->{model
} eq 'virtio';
2123 my $vmname = $conf->{name
} || "vm$vmid";
2126 my $script = $hotplug ?
"pve-bridge-hotplug" : "pve-bridge";
2128 if ($net->{bridge
}) {
2129 $netdev = "type=tap,id=$netid,ifname=${ifname},script=/var/lib/qemu-server/$script,downscript=/var/lib/qemu-server/pve-bridgedown$vhostparam";
2131 $netdev = "type=user,id=$netid,hostname=$vmname";
2134 $netdev .= ",queues=$net->{queues}" if ($net->{queues
} && $net->{model
} eq 'virtio');
2140 sub print_cpu_device
{
2141 my ($conf, $id) = @_;
2143 my $kvm = $conf->{kvm
} // 1;
2144 my $cpu = $kvm ?
"kvm64" : "qemu64";
2145 if (my $cputype = $conf->{cpu
}) {
2146 my $cpuconf = PVE
::JSONSchema
::parse_property_string
($cpu_fmt, $cputype)
2147 or die "Cannot parse cpu description: $cputype\n";
2148 $cpu = $cpuconf->{cputype
};
2151 my $cores = $conf->{cores
} || 1;
2153 my $current_core = ($id - 1) % $cores;
2154 my $current_socket = int(($id - 1 - $current_core)/$cores);
2156 return "$cpu-x86_64-cpu,id=cpu$id,socket-id=$current_socket,core-id=$current_core,thread-id=0";
2160 'cirrus' => 'cirrus-vga',
2162 'vmware' => 'vmware-svga',
2163 'virtio' => 'virtio-vga',
2166 sub print_vga_device
{
2167 my ($conf, $vga, $arch, $machine, $id, $qxlnum, $bridges) = @_;
2169 my $type = $vga_map->{$vga->{type
}};
2170 if ($arch eq 'aarch64' && defined($type) && $type eq 'virtio-vga') {
2171 $type = 'virtio-gpu';
2173 my $vgamem_mb = $vga->{memory
};
2175 $type = $id ?
'qxl' : 'qxl-vga';
2177 die "no devicetype for $vga->{type}\n" if !$type;
2181 if ($vga->{type
} eq 'virtio') {
2182 my $bytes = PVE
::Tools
::convert_size
($vgamem_mb, "mb" => "b");
2183 $memory = ",max_hostmem=$bytes";
2185 # from https://www.spice-space.org/multiple-monitors.html
2186 $memory = ",vgamem_mb=$vga->{memory}";
2187 my $ram = $vgamem_mb * 4;
2188 my $vram = $vgamem_mb * 2;
2189 $memory .= ",ram_size_mb=$ram,vram_size_mb=$vram";
2191 $memory = ",vgamem_mb=$vga->{memory}";
2193 } elsif ($qxlnum && $id) {
2194 $memory = ",ram_size=67108864,vram_size=33554432";
2197 my $q35 = machine_type_is_q35
($conf);
2198 my $vgaid = "vga" . ($id // '');
2201 if ($q35 && $vgaid eq 'vga') {
2202 # the first display uses pcie.0 bus on q35 machines
2203 $pciaddr = print_pcie_addr
($vgaid, $bridges, $arch, $machine);
2205 $pciaddr = print_pci_addr
($vgaid, $bridges, $arch, $machine);
2208 return "$type,id=${vgaid}${memory}${pciaddr}";
2211 sub drive_is_cloudinit
{
2213 return $drive->{file
} =~ m
@[:/]vm-\d
+-cloudinit
(?
:\
.$QEMU_FORMAT_RE)?
$@;
2216 sub drive_is_cdrom
{
2217 my ($drive, $exclude_cloudinit) = @_;
2219 return 0 if $exclude_cloudinit && drive_is_cloudinit
($drive);
2221 return $drive && $drive->{media
} && ($drive->{media
} eq 'cdrom');
2225 sub parse_number_sets
{
2228 foreach my $part (split(/;/, $set)) {
2229 if ($part =~ /^\s*(\d+)(?:-(\d+))?\s*$/) {
2230 die "invalid range: $part ($2 < $1)\n" if defined($2) && $2 < $1;
2231 push @$res, [ $1, $2 ];
2233 die "invalid range: $part\n";
2242 my $res = PVE
::JSONSchema
::parse_property_string
($numa_fmt, $data);
2243 $res->{cpus
} = parse_number_sets
($res->{cpus
}) if defined($res->{cpus
});
2244 $res->{hostnodes
} = parse_number_sets
($res->{hostnodes
}) if defined($res->{hostnodes
});
2251 return undef if !$value;
2253 my $res = PVE
::JSONSchema
::parse_property_string
($hostpci_fmt, $value);
2255 my @idlist = split(/;/, $res->{host
});
2256 delete $res->{host
};
2257 foreach my $id (@idlist) {
2258 if ($id =~ m/\./) { # full id 00:00.1
2259 push @{$res->{pciid
}}, {
2262 } else { # partial id 00:00
2263 $res->{pciid
} = PVE
::SysFSTools
::lspci
($id);
2269 # netX: e1000=XX:XX:XX:XX:XX:XX,bridge=vmbr0,rate=<mbps>
2273 my $res = eval { PVE
::JSONSchema
::parse_property_string
($net_fmt, $data) };
2278 if (!defined($res->{macaddr
})) {
2279 my $dc = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
2280 $res->{macaddr
} = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
});
2285 # ipconfigX ip=cidr,gw=ip,ip6=cidr,gw6=ip
2286 sub parse_ipconfig
{
2289 my $res = eval { PVE
::JSONSchema
::parse_property_string
($ipconfig_fmt, $data) };
2295 if ($res->{gw
} && !$res->{ip
}) {
2296 warn 'gateway specified without specifying an IP address';
2299 if ($res->{gw6
} && !$res->{ip6
}) {
2300 warn 'IPv6 gateway specified without specifying an IPv6 address';
2303 if ($res->{gw
} && $res->{ip
} eq 'dhcp') {
2304 warn 'gateway specified together with DHCP';
2307 if ($res->{gw6
} && $res->{ip6
} !~ /^$IPV6RE/) {
2309 warn "IPv6 gateway specified together with $res->{ip6} address";
2313 if (!$res->{ip
} && !$res->{ip6
}) {
2314 return { ip
=> 'dhcp', ip6
=> 'dhcp' };
2323 return PVE
::JSONSchema
::print_property_string
($net, $net_fmt);
2326 sub add_random_macs
{
2327 my ($settings) = @_;
2329 foreach my $opt (keys %$settings) {
2330 next if $opt !~ m/^net(\d+)$/;
2331 my $net = parse_net
($settings->{$opt});
2333 $settings->{$opt} = print_net
($net);
2337 sub vm_is_volid_owner
{
2338 my ($storecfg, $vmid, $volid) = @_;
2340 if ($volid !~ m
|^/|) {
2342 eval { ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid); };
2343 if ($owner && ($owner == $vmid)) {
2351 sub split_flagged_list
{
2352 my $text = shift || '';
2353 $text =~ s/[,;]/ /g;
2355 return { map { /^(!?)(.*)$/ && ($2, $1) } ($text =~ /\S+/g) };
2358 sub join_flagged_list
{
2359 my ($how, $lst) = @_;
2360 join $how, map { $lst->{$_} . $_ } keys %$lst;
2363 sub vmconfig_delete_pending_option
{
2364 my ($conf, $key, $force) = @_;
2366 delete $conf->{pending
}->{$key};
2367 my $pending_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2368 $pending_delete_hash->{$key} = $force ?
'!' : '';
2369 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2372 sub vmconfig_undelete_pending_option
{
2373 my ($conf, $key) = @_;
2375 my $pending_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2376 delete $pending_delete_hash->{$key};
2378 if (%$pending_delete_hash) {
2379 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2381 delete $conf->{pending
}->{delete};
2385 sub vmconfig_register_unused_drive
{
2386 my ($storecfg, $vmid, $conf, $drive) = @_;
2388 if (drive_is_cloudinit
($drive)) {
2389 eval { PVE
::Storage
::vdisk_free
($storecfg, $drive->{file
}) };
2391 } elsif (!drive_is_cdrom
($drive)) {
2392 my $volid = $drive->{file
};
2393 if (vm_is_volid_owner
($storecfg, $vmid, $volid)) {
2394 PVE
::QemuConfig-
>add_unused_volume($conf, $volid, $vmid);
2399 sub vmconfig_cleanup_pending
{
2402 # remove pending changes when nothing changed
2404 foreach my $opt (keys %{$conf->{pending
}}) {
2405 if (defined($conf->{$opt}) && ($conf->{pending
}->{$opt} eq $conf->{$opt})) {
2407 delete $conf->{pending
}->{$opt};
2411 my $current_delete_hash = split_flagged_list
($conf->{pending
}->{delete});
2412 my $pending_delete_hash = {};
2413 while (my ($opt, $force) = each %$current_delete_hash) {
2414 if (defined($conf->{$opt})) {
2415 $pending_delete_hash->{$opt} = $force;
2421 if (%$pending_delete_hash) {
2422 $conf->{pending
}->{delete} = join_flagged_list
(',', $pending_delete_hash);
2424 delete $conf->{pending
}->{delete};
2430 # smbios: [manufacturer=str][,product=str][,version=str][,serial=str][,uuid=uuid][,sku=str][,family=str][,base64=bool]
2434 pattern
=> '[a-fA-F0-9]{8}(?:-[a-fA-F0-9]{4}){3}-[a-fA-F0-9]{12}',
2435 format_description
=> 'UUID',
2436 description
=> "Set SMBIOS1 UUID.",
2441 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2442 format_description
=> 'Base64 encoded string',
2443 description
=> "Set SMBIOS1 version.",
2448 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2449 format_description
=> 'Base64 encoded string',
2450 description
=> "Set SMBIOS1 serial number.",
2455 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2456 format_description
=> 'Base64 encoded string',
2457 description
=> "Set SMBIOS1 manufacturer.",
2462 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2463 format_description
=> 'Base64 encoded string',
2464 description
=> "Set SMBIOS1 product ID.",
2469 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2470 format_description
=> 'Base64 encoded string',
2471 description
=> "Set SMBIOS1 SKU string.",
2476 pattern
=> '[A-Za-z0-9+\/]+={0,2}',
2477 format_description
=> 'Base64 encoded string',
2478 description
=> "Set SMBIOS1 family string.",
2483 description
=> 'Flag to indicate that the SMBIOS values are base64 encoded',
2491 my $res = eval { PVE
::JSONSchema
::parse_property_string
($smbios1_fmt, $data) };
2498 return PVE
::JSONSchema
::print_property_string
($smbios1, $smbios1_fmt);
2501 PVE
::JSONSchema
::register_format
('pve-qm-smbios1', $smbios1_fmt);
2503 PVE
::JSONSchema
::register_format
('pve-qm-bootdisk', \
&verify_bootdisk
);
2504 sub verify_bootdisk
{
2505 my ($value, $noerr) = @_;
2507 return $value if is_valid_drivename
($value);
2509 return undef if $noerr;
2511 die "invalid boot disk '$value'\n";
2514 sub parse_watchdog
{
2517 return undef if !$value;
2519 my $res = eval { PVE
::JSONSchema
::parse_property_string
($watchdog_fmt, $value) };
2524 sub parse_guest_agent
{
2527 return {} if !defined($value->{agent
});
2529 my $res = eval { PVE
::JSONSchema
::parse_property_string
($agent_fmt, $value->{agent
}) };
2532 # if the agent is disabled ignore the other potentially set properties
2533 return {} if !$res->{enabled
};
2540 return {} if !$value;
2541 my $res = eval { PVE
::JSONSchema
::parse_property_string
($vga_fmt, $value) };
2546 PVE
::JSONSchema
::register_format
('pve-qm-usb-device', \
&verify_usb_device
);
2547 sub verify_usb_device
{
2548 my ($value, $noerr) = @_;
2550 return $value if parse_usb_device
($value);
2552 return undef if $noerr;
2554 die "unable to parse usb device\n";
2557 # add JSON properties for create and set function
2558 sub json_config_properties
{
2561 foreach my $opt (keys %$confdesc) {
2562 next if $opt eq 'parent' || $opt eq 'snaptime' || $opt eq 'vmstate' || $opt eq 'runningmachine';
2563 $prop->{$opt} = $confdesc->{$opt};
2569 # return copy of $confdesc_cloudinit to generate documentation
2570 sub cloudinit_config_properties
{
2572 return dclone
($confdesc_cloudinit);
2576 my ($key, $value) = @_;
2578 die "unknown setting '$key'\n" if !$confdesc->{$key};
2580 my $type = $confdesc->{$key}->{type
};
2582 if (!defined($value)) {
2583 die "got undefined value\n";
2586 if ($value =~ m/[\n\r]/) {
2587 die "property contains a line feed\n";
2590 if ($type eq 'boolean') {
2591 return 1 if ($value eq '1') || ($value =~ m/^(on|yes|true)$/i);
2592 return 0 if ($value eq '0') || ($value =~ m/^(off|no|false)$/i);
2593 die "type check ('boolean') failed - got '$value'\n";
2594 } elsif ($type eq 'integer') {
2595 return int($1) if $value =~ m/^(\d+)$/;
2596 die "type check ('integer') failed - got '$value'\n";
2597 } elsif ($type eq 'number') {
2598 return $value if $value =~ m/^(\d+)(\.\d+)?$/;
2599 die "type check ('number') failed - got '$value'\n";
2600 } elsif ($type eq 'string') {
2601 if (my $fmt = $confdesc->{$key}->{format
}) {
2602 PVE
::JSONSchema
::check_format
($fmt, $value);
2605 $value =~ s/^\"(.*)\"$/$1/;
2608 die "internal error"
2615 my $conf = PVE
::QemuConfig-
>config_file($vmid);
2616 utime undef, undef, $conf;
2620 my ($storecfg, $vmid, $keep_empty_config, $skiplock) = @_;
2622 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
2624 my $conf = PVE
::QemuConfig-
>load_config($vmid);
2626 PVE
::QemuConfig-
>check_lock($conf) if !$skiplock;
2628 if ($conf->{template
}) {
2629 # check if any base image is still used by a linked clone
2630 foreach_drive
($conf, sub {
2631 my ($ds, $drive) = @_;
2633 return if drive_is_cdrom
($drive);
2635 my $volid = $drive->{file
};
2637 return if !$volid || $volid =~ m
|^/|;
2639 die "base volume '$volid' is still in use by linked cloned\n"
2640 if PVE
::Storage
::volume_is_base_and_used
($storecfg, $volid);
2645 # only remove disks owned by this VM
2646 foreach_drive
($conf, sub {
2647 my ($ds, $drive) = @_;
2649 return if drive_is_cdrom
($drive, 1);
2651 my $volid = $drive->{file
};
2653 return if !$volid || $volid =~ m
|^/|;
2655 my ($path, $owner) = PVE
::Storage
::path
($storecfg, $volid);
2656 return if !$path || !$owner || ($owner != $vmid);
2659 PVE
::Storage
::vdisk_free
($storecfg, $volid);
2661 warn "Could not remove disk '$volid', check manually: $@" if $@;
2665 if ($keep_empty_config) {
2666 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
2671 # also remove unused disk
2673 my $dl = PVE
::Storage
::vdisk_list
($storecfg, undef, $vmid);
2676 PVE
::Storage
::foreach_volid
($dl, sub {
2677 my ($volid, $sid, $volname, $d) = @_;
2678 PVE
::Storage
::vdisk_free
($storecfg, $volid);
2687 sub parse_vm_config
{
2688 my ($filename, $raw) = @_;
2690 return undef if !defined($raw);
2693 digest
=> Digest
::SHA
::sha1_hex
($raw),
2698 $filename =~ m
|/qemu-server/(\d
+)\
.conf
$|
2699 || die "got strange filename '$filename'";
2707 my @lines = split(/\n/, $raw);
2708 foreach my $line (@lines) {
2709 next if $line =~ m/^\s*$/;
2711 if ($line =~ m/^\[PENDING\]\s*$/i) {
2712 $section = 'pending';
2713 if (defined($descr)) {
2715 $conf->{description
} = $descr;
2718 $conf = $res->{$section} = {};
2721 } elsif ($line =~ m/^\[([a-z][a-z0-9_\-]+)\]\s*$/i) {
2723 if (defined($descr)) {
2725 $conf->{description
} = $descr;
2728 $conf = $res->{snapshots
}->{$section} = {};
2732 if ($line =~ m/^\#(.*)\s*$/) {
2733 $descr = '' if !defined($descr);
2734 $descr .= PVE
::Tools
::decode_text
($1) . "\n";
2738 if ($line =~ m/^(description):\s*(.*\S)\s*$/) {
2739 $descr = '' if !defined($descr);
2740 $descr .= PVE
::Tools
::decode_text
($2);
2741 } elsif ($line =~ m/snapstate:\s*(prepare|delete)\s*$/) {
2742 $conf->{snapstate
} = $1;
2743 } elsif ($line =~ m/^(args):\s*(.*\S)\s*$/) {
2746 $conf->{$key} = $value;
2747 } elsif ($line =~ m/^delete:\s*(.*\S)\s*$/) {
2749 if ($section eq 'pending') {
2750 $conf->{delete} = $value; # we parse this later
2752 warn "vm $vmid - propertry 'delete' is only allowed in [PENDING]\n";
2754 } elsif ($line =~ m/^([a-z][a-z_]*\d*):\s*(.+?)\s*$/) {
2757 eval { $value = check_type
($key, $value); };
2759 warn "vm $vmid - unable to parse value of '$key' - $@";
2761 $key = 'ide2' if $key eq 'cdrom';
2762 my $fmt = $confdesc->{$key}->{format
};
2763 if ($fmt && $fmt =~ /^pve-qm-(?:ide|scsi|virtio|sata)$/) {
2764 my $v = parse_drive
($key, $value);
2765 if (my $volid = filename_to_volume_id
($vmid, $v->{file
}, $v->{media
})) {
2766 $v->{file
} = $volid;
2767 $value = print_drive
($vmid, $v);
2769 warn "vm $vmid - unable to parse value of '$key'\n";
2774 $conf->{$key} = $value;
2779 if (defined($descr)) {
2781 $conf->{description
} = $descr;
2783 delete $res->{snapstate
}; # just to be sure
2788 sub write_vm_config
{
2789 my ($filename, $conf) = @_;
2791 delete $conf->{snapstate
}; # just to be sure
2793 if ($conf->{cdrom
}) {
2794 die "option ide2 conflicts with cdrom\n" if $conf->{ide2
};
2795 $conf->{ide2
} = $conf->{cdrom
};
2796 delete $conf->{cdrom
};
2799 # we do not use 'smp' any longer
2800 if ($conf->{sockets
}) {
2801 delete $conf->{smp
};
2802 } elsif ($conf->{smp
}) {
2803 $conf->{sockets
} = $conf->{smp
};
2804 delete $conf->{cores
};
2805 delete $conf->{smp
};
2808 my $used_volids = {};
2810 my $cleanup_config = sub {
2811 my ($cref, $pending, $snapname) = @_;
2813 foreach my $key (keys %$cref) {
2814 next if $key eq 'digest' || $key eq 'description' || $key eq 'snapshots' ||
2815 $key eq 'snapstate' || $key eq 'pending';
2816 my $value = $cref->{$key};
2817 if ($key eq 'delete') {
2818 die "propertry 'delete' is only allowed in [PENDING]\n"
2820 # fixme: check syntax?
2823 eval { $value = check_type
($key, $value); };
2824 die "unable to parse value of '$key' - $@" if $@;
2826 $cref->{$key} = $value;
2828 if (!$snapname && is_valid_drivename
($key)) {
2829 my $drive = parse_drive
($key, $value);
2830 $used_volids->{$drive->{file
}} = 1 if $drive && $drive->{file
};
2835 &$cleanup_config($conf);
2837 &$cleanup_config($conf->{pending
}, 1);
2839 foreach my $snapname (keys %{$conf->{snapshots
}}) {
2840 die "internal error" if $snapname eq 'pending';
2841 &$cleanup_config($conf->{snapshots
}->{$snapname}, undef, $snapname);
2844 # remove 'unusedX' settings if we re-add a volume
2845 foreach my $key (keys %$conf) {
2846 my $value = $conf->{$key};
2847 if ($key =~ m/^unused/ && $used_volids->{$value}) {
2848 delete $conf->{$key};
2852 my $generate_raw_config = sub {
2853 my ($conf, $pending) = @_;
2857 # add description as comment to top of file
2858 if (defined(my $descr = $conf->{description
})) {
2860 foreach my $cl (split(/\n/, $descr)) {
2861 $raw .= '#' . PVE
::Tools
::encode_text
($cl) . "\n";
2864 $raw .= "#\n" if $pending;
2868 foreach my $key (sort keys %$conf) {
2869 next if $key eq 'digest' || $key eq 'description' || $key eq 'pending' || $key eq 'snapshots';
2870 $raw .= "$key: $conf->{$key}\n";
2875 my $raw = &$generate_raw_config($conf);
2877 if (scalar(keys %{$conf->{pending
}})){
2878 $raw .= "\n[PENDING]\n";
2879 $raw .= &$generate_raw_config($conf->{pending
}, 1);
2882 foreach my $snapname (sort keys %{$conf->{snapshots
}}) {
2883 $raw .= "\n[$snapname]\n";
2884 $raw .= &$generate_raw_config($conf->{snapshots
}->{$snapname});
2894 # we use static defaults from our JSON schema configuration
2895 foreach my $key (keys %$confdesc) {
2896 if (defined(my $default = $confdesc->{$key}->{default})) {
2897 $res->{$key} = $default;
2905 my $vmlist = PVE
::Cluster
::get_vmlist
();
2907 return $res if !$vmlist || !$vmlist->{ids
};
2908 my $ids = $vmlist->{ids
};
2910 foreach my $vmid (keys %$ids) {
2911 my $d = $ids->{$vmid};
2912 next if !$d->{node
} || $d->{node
} ne $nodename;
2913 next if !$d->{type
} || $d->{type
} ne 'qemu';
2914 $res->{$vmid}->{exists} = 1;
2919 # test if VM uses local resources (to prevent migration)
2920 sub check_local_resources
{
2921 my ($conf, $noerr) = @_;
2925 push @loc_res, "hostusb" if $conf->{hostusb
}; # old syntax
2926 push @loc_res, "hostpci" if $conf->{hostpci
}; # old syntax
2928 push @loc_res, "ivshmem" if $conf->{ivshmem
};
2930 foreach my $k (keys %$conf) {
2931 next if $k =~ m/^usb/ && ($conf->{$k} =~ m/^spice(?![^,])/);
2932 # sockets are safe: they will recreated be on the target side post-migrate
2933 next if $k =~ m/^serial/ && ($conf->{$k} eq 'socket');
2934 push @loc_res, $k if $k =~ m/^(usb|hostpci|serial|parallel)\d+$/;
2937 die "VM uses local resources\n" if scalar @loc_res && !$noerr;
2942 # check if used storages are available on all nodes (use by migrate)
2943 sub check_storage_availability
{
2944 my ($storecfg, $conf, $node) = @_;
2946 foreach_drive
($conf, sub {
2947 my ($ds, $drive) = @_;
2949 my $volid = $drive->{file
};
2952 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2955 # check if storage is available on both nodes
2956 my $scfg = PVE
::Storage
::storage_check_node
($storecfg, $sid);
2957 PVE
::Storage
::storage_check_node
($storecfg, $sid, $node);
2961 # list nodes where all VM images are available (used by has_feature API)
2963 my ($conf, $storecfg) = @_;
2965 my $nodelist = PVE
::Cluster
::get_nodelist
();
2966 my $nodehash = { map { $_ => 1 } @$nodelist };
2967 my $nodename = PVE
::INotify
::nodename
();
2969 foreach_drive
($conf, sub {
2970 my ($ds, $drive) = @_;
2972 my $volid = $drive->{file
};
2975 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
2977 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
2978 if ($scfg->{disable
}) {
2980 } elsif (my $avail = $scfg->{nodes
}) {
2981 foreach my $node (keys %$nodehash) {
2982 delete $nodehash->{$node} if !$avail->{$node};
2984 } elsif (!$scfg->{shared
}) {
2985 foreach my $node (keys %$nodehash) {
2986 delete $nodehash->{$node} if $node ne $nodename
2995 sub check_local_storage_availability
{
2996 my ($conf, $storecfg) = @_;
2998 my $nodelist = PVE
::Cluster
::get_nodelist
();
2999 my $nodehash = { map { $_ => {} } @$nodelist };
3001 foreach_drive
($conf, sub {
3002 my ($ds, $drive) = @_;
3004 my $volid = $drive->{file
};
3007 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
3009 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
3011 if ($scfg->{disable
}) {
3012 foreach my $node (keys %$nodehash) {
3013 $nodehash->{$node}->{unavailable_storages
}->{$storeid} = 1;
3015 } elsif (my $avail = $scfg->{nodes
}) {
3016 foreach my $node (keys %$nodehash) {
3017 if (!$avail->{$node}) {
3018 $nodehash->{$node}->{unavailable_storages
}->{$storeid} = 1;
3025 foreach my $node (values %$nodehash) {
3026 if (my $unavail = $node->{unavailable_storages
}) {
3027 $node->{unavailable_storages
} = [ sort keys %$unavail ];
3035 my ($pidfile, $pid) = @_;
3037 my $fh = IO
::File-
>new("/proc/$pid/cmdline", "r");
3041 return undef if !$line;
3042 my @param = split(/\0/, $line);
3044 my $cmd = $param[0];
3045 return if !$cmd || ($cmd !~ m
|kvm
$| && $cmd !~ m
@(?
:^|/)qemu-system-[^/]+$@);
3047 for (my $i = 0; $i < scalar (@param); $i++) {
3050 if (($p eq '-pidfile') || ($p eq '--pidfile')) {
3051 my $p = $param[$i+1];
3052 return 1 if $p && ($p eq $pidfile);
3061 my ($vmid, $nocheck, $node) = @_;
3063 my $filename = PVE
::QemuConfig-
>config_file($vmid, $node);
3065 die "unable to find configuration file for VM $vmid - no such machine\n"
3066 if !$nocheck && ! -f
$filename;
3068 my $pidfile = pidfile_name
($vmid);
3070 if (my $fd = IO
::File-
>new("<$pidfile")) {
3075 my $mtime = $st->mtime;
3076 if ($mtime > time()) {
3077 warn "file '$filename' modified in future\n";
3080 if ($line =~ m/^(\d+)$/) {
3082 if (check_cmdline
($pidfile, $pid)) {
3083 if (my $pinfo = PVE
::ProcFSTools
::check_process_running
($pid)) {
3095 my $vzlist = config_list
();
3097 my $fd = IO
::Dir-
>new($var_run_tmpdir) || return $vzlist;
3099 while (defined(my $de = $fd->read)) {
3100 next if $de !~ m/^(\d+)\.pid$/;
3102 next if !defined($vzlist->{$vmid});
3103 if (my $pid = check_running
($vmid)) {
3104 $vzlist->{$vmid}->{pid
} = $pid;
3112 my ($storecfg, $conf) = @_;
3114 my $bootdisk = $conf->{bootdisk
};
3115 return undef if !$bootdisk;
3116 return undef if !is_valid_drivename
($bootdisk);
3118 return undef if !$conf->{$bootdisk};
3120 my $drive = parse_drive
($bootdisk, $conf->{$bootdisk});
3121 return undef if !defined($drive);
3123 return undef if drive_is_cdrom
($drive);
3125 my $volid = $drive->{file
};
3126 return undef if !$volid;
3128 return $drive->{size
};
3131 our $vmstatus_return_properties = {
3132 vmid
=> get_standard_option
('pve-vmid'),
3134 description
=> "Qemu process status.",
3136 enum
=> ['stopped', 'running'],
3139 description
=> "Maximum memory in bytes.",
3142 renderer
=> 'bytes',
3145 description
=> "Root disk size in bytes.",
3148 renderer
=> 'bytes',
3151 description
=> "VM name.",
3156 description
=> "Qemu QMP agent status.",
3161 description
=> "PID of running qemu process.",
3166 description
=> "Uptime.",
3169 renderer
=> 'duration',
3172 description
=> "Maximum usable CPUs.",
3177 description
=> "The current config lock, if any.",
3183 my $last_proc_pid_stat;
3185 # get VM status information
3186 # This must be fast and should not block ($full == false)
3187 # We only query KVM using QMP if $full == true (this can be slow)
3189 my ($opt_vmid, $full) = @_;
3193 my $storecfg = PVE
::Storage
::config
();
3195 my $list = vzlist
();
3196 my $defaults = load_defaults
();
3198 my ($uptime) = PVE
::ProcFSTools
::read_proc_uptime
(1);
3200 my $cpucount = $cpuinfo->{cpus
} || 1;
3202 foreach my $vmid (keys %$list) {
3203 next if $opt_vmid && ($vmid ne $opt_vmid);
3205 my $cfspath = PVE
::QemuConfig-
>cfs_config_path($vmid);
3206 my $conf = PVE
::Cluster
::cfs_read_file
($cfspath) || {};
3208 my $d = { vmid
=> $vmid };
3209 $d->{pid
} = $list->{$vmid}->{pid
};
3211 # fixme: better status?
3212 $d->{status
} = $list->{$vmid}->{pid
} ?
'running' : 'stopped';
3214 my $size = disksize
($storecfg, $conf);
3215 if (defined($size)) {
3216 $d->{disk
} = 0; # no info available
3217 $d->{maxdisk
} = $size;
3223 $d->{cpus
} = ($conf->{sockets
} || $defaults->{sockets
})
3224 * ($conf->{cores
} || $defaults->{cores
});
3225 $d->{cpus
} = $cpucount if $d->{cpus
} > $cpucount;
3226 $d->{cpus
} = $conf->{vcpus
} if $conf->{vcpus
};
3228 $d->{name
} = $conf->{name
} || "VM $vmid";
3229 $d->{maxmem
} = $conf->{memory
} ?
$conf->{memory
}*(1024*1024)
3230 : $defaults->{memory
}*(1024*1024);
3232 if ($conf->{balloon
}) {
3233 $d->{balloon_min
} = $conf->{balloon
}*(1024*1024);
3234 $d->{shares
} = defined($conf->{shares
}) ?
$conf->{shares
}
3235 : $defaults->{shares
};
3246 $d->{diskwrite
} = 0;
3248 $d->{template
} = PVE
::QemuConfig-
>is_template($conf);
3250 $d->{serial
} = 1 if conf_has_serial
($conf);
3251 $d->{lock} = $conf->{lock} if $conf->{lock};
3256 my $netdev = PVE
::ProcFSTools
::read_proc_net_dev
();
3257 foreach my $dev (keys %$netdev) {
3258 next if $dev !~ m/^tap([1-9]\d*)i/;
3260 my $d = $res->{$vmid};
3263 $d->{netout
} += $netdev->{$dev}->{receive
};
3264 $d->{netin
} += $netdev->{$dev}->{transmit
};
3267 $d->{nics
}->{$dev}->{netout
} = $netdev->{$dev}->{receive
};
3268 $d->{nics
}->{$dev}->{netin
} = $netdev->{$dev}->{transmit
};
3273 my $ctime = gettimeofday
;
3275 foreach my $vmid (keys %$list) {
3277 my $d = $res->{$vmid};
3278 my $pid = $d->{pid
};
3281 my $pstat = PVE
::ProcFSTools
::read_proc_pid_stat
($pid);
3282 next if !$pstat; # not running
3284 my $used = $pstat->{utime} + $pstat->{stime
};
3286 $d->{uptime
} = int(($uptime - $pstat->{starttime
})/$cpuinfo->{user_hz
});
3288 if ($pstat->{vsize
}) {
3289 $d->{mem
} = int(($pstat->{rss
}/$pstat->{vsize
})*$d->{maxmem
});
3292 my $old = $last_proc_pid_stat->{$pid};
3294 $last_proc_pid_stat->{$pid} = {
3302 my $dtime = ($ctime - $old->{time}) * $cpucount * $cpuinfo->{user_hz
};
3304 if ($dtime > 1000) {
3305 my $dutime = $used - $old->{used
};
3307 $d->{cpu
} = (($dutime/$dtime)* $cpucount) / $d->{cpus
};
3308 $last_proc_pid_stat->{$pid} = {
3314 $d->{cpu
} = $old->{cpu
};
3318 return $res if !$full;
3320 my $qmpclient = PVE
::QMPClient-
>new();
3322 my $ballooncb = sub {
3323 my ($vmid, $resp) = @_;
3325 my $info = $resp->{'return'};
3326 return if !$info->{max_mem
};
3328 my $d = $res->{$vmid};
3330 # use memory assigned to VM
3331 $d->{maxmem
} = $info->{max_mem
};
3332 $d->{balloon
} = $info->{actual
};
3334 if (defined($info->{total_mem
}) && defined($info->{free_mem
})) {
3335 $d->{mem
} = $info->{total_mem
} - $info->{free_mem
};
3336 $d->{freemem
} = $info->{free_mem
};
3339 $d->{ballooninfo
} = $info;
3342 my $blockstatscb = sub {
3343 my ($vmid, $resp) = @_;
3344 my $data = $resp->{'return'} || [];
3345 my $totalrdbytes = 0;
3346 my $totalwrbytes = 0;
3348 for my $blockstat (@$data) {
3349 $totalrdbytes = $totalrdbytes + $blockstat->{stats
}->{rd_bytes
};
3350 $totalwrbytes = $totalwrbytes + $blockstat->{stats
}->{wr_bytes
};
3352 $blockstat->{device
} =~ s/drive-//;
3353 $res->{$vmid}->{blockstat
}->{$blockstat->{device
}} = $blockstat->{stats
};
3355 $res->{$vmid}->{diskread
} = $totalrdbytes;
3356 $res->{$vmid}->{diskwrite
} = $totalwrbytes;
3359 my $statuscb = sub {
3360 my ($vmid, $resp) = @_;
3362 $qmpclient->queue_cmd($vmid, $blockstatscb, 'query-blockstats');
3363 # this fails if ballon driver is not loaded, so this must be
3364 # the last commnand (following command are aborted if this fails).
3365 $qmpclient->queue_cmd($vmid, $ballooncb, 'query-balloon');
3367 my $status = 'unknown';
3368 if (!defined($status = $resp->{'return'}->{status
})) {
3369 warn "unable to get VM status\n";
3373 $res->{$vmid}->{qmpstatus
} = $resp->{'return'}->{status
};
3376 foreach my $vmid (keys %$list) {
3377 next if $opt_vmid && ($vmid ne $opt_vmid);
3378 next if !$res->{$vmid}->{pid
}; # not running
3379 $qmpclient->queue_cmd($vmid, $statuscb, 'query-status');
3382 $qmpclient->queue_execute(undef, 2);
3384 foreach my $vmid (keys %$list) {
3385 next if $opt_vmid && ($vmid ne $opt_vmid);
3386 $res->{$vmid}->{qmpstatus
} = $res->{$vmid}->{status
} if !$res->{$vmid}->{qmpstatus
};
3393 my ($conf, $func, @param) = @_;
3395 foreach my $ds (valid_drive_names
()) {
3396 next if !defined($conf->{$ds});
3398 my $drive = parse_drive
($ds, $conf->{$ds});
3401 &$func($ds, $drive, @param);
3406 my ($conf, $func, @param) = @_;
3410 my $test_volid = sub {
3411 my ($volid, $is_cdrom, $replicate, $shared, $snapname, $size) = @_;
3415 $volhash->{$volid}->{cdrom
} //= 1;
3416 $volhash->{$volid}->{cdrom
} = 0 if !$is_cdrom;
3418 $volhash->{$volid}->{replicate
} //= 0;
3419 $volhash->{$volid}->{replicate
} = 1 if $replicate;
3421 $volhash->{$volid}->{shared
} //= 0;
3422 $volhash->{$volid}->{shared
} = 1 if $shared;
3424 $volhash->{$volid}->{referenced_in_config
} //= 0;
3425 $volhash->{$volid}->{referenced_in_config
} = 1 if !defined($snapname);
3427 $volhash->{$volid}->{referenced_in_snapshot
}->{$snapname} = 1
3428 if defined($snapname);
3429 $volhash->{$volid}->{size
} = $size if $size;
3432 foreach_drive
($conf, sub {
3433 my ($ds, $drive) = @_;
3434 $test_volid->($drive->{file
}, drive_is_cdrom
($drive), $drive->{replicate
} // 1, $drive->{shared
}, undef, $drive->{size
});
3437 foreach my $snapname (keys %{$conf->{snapshots
}}) {
3438 my $snap = $conf->{snapshots
}->{$snapname};
3439 $test_volid->($snap->{vmstate
}, 0, 1, $snapname);
3440 foreach_drive
($snap, sub {
3441 my ($ds, $drive) = @_;
3442 $test_volid->($drive->{file
}, drive_is_cdrom
($drive), $drive->{replicate
} // 1, $drive->{shared
}, $snapname);
3446 foreach my $volid (keys %$volhash) {
3447 &$func($volid, $volhash->{$volid}, @param);
3451 sub conf_has_serial
{
3454 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
3455 if ($conf->{"serial$i"}) {
3463 sub conf_has_audio
{
3464 my ($conf, $id) = @_;
3467 my $audio = $conf->{"audio$id"};
3468 return undef if !defined($audio);
3470 my $audioproperties = PVE
::JSONSchema
::parse_property_string
($audio_fmt, $audio);
3471 my $audiodriver = $audioproperties->{driver
} // 'spice';
3474 dev
=> $audioproperties->{device
},
3475 dev_id
=> "audiodev$id",
3476 backend
=> $audiodriver,
3477 backend_id
=> "$audiodriver-backend${id}",
3481 sub vga_conf_has_spice
{
3484 my $vgaconf = parse_vga
($vga);
3485 my $vgatype = $vgaconf->{type
};
3486 return 0 if !$vgatype || $vgatype !~ m/^qxl([234])?$/;
3491 my $host_arch; # FIXME: fix PVE::Tools::get_host_arch
3492 sub get_host_arch
() {
3493 $host_arch = (POSIX
::uname
())[4] if !$host_arch;
3499 return get_host_arch
() eq $arch;
3502 my $default_machines = {
3507 sub get_basic_machine_info
{
3508 my ($conf, $forcemachine) = @_;
3510 my $arch = $conf->{arch
} // get_host_arch
();
3511 my $machine = $forcemachine || $conf->{machine
} || $default_machines->{$arch};
3512 return ($arch, $machine);
3515 sub get_ovmf_files
($) {
3518 my $ovmf = $OVMF->{$arch}
3519 or die "no OVMF images known for architecture '$arch'\n";
3525 aarch64
=> '/usr/bin/qemu-system-aarch64',
3526 x86_64
=> '/usr/bin/qemu-system-x86_64',
3528 sub get_command_for_arch
($) {
3530 return '/usr/bin/kvm' if is_native
($arch);
3532 my $cmd = $Arch2Qemu->{$arch}
3533 or die "don't know how to emulate architecture '$arch'\n";
3537 sub get_cpu_options
{
3538 my ($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough) = @_;
3541 my $ostype = $conf->{ostype
};
3543 my $cpu = $kvm ?
"kvm64" : "qemu64";
3544 if ($arch eq 'aarch64') {
3545 $cpu = 'cortex-a57';
3548 if (my $cputype = $conf->{cpu
}) {
3549 my $cpuconf = PVE
::JSONSchema
::parse_property_string
($cpu_fmt, $cputype)
3550 or die "Cannot parse cpu description: $cputype\n";
3551 $cpu = $cpuconf->{cputype
};
3552 $kvm_off = 1 if $cpuconf->{hidden
};
3553 $hv_vendor_id = $cpuconf->{'hv-vendor-id'};
3555 if (defined(my $flags = $cpuconf->{flags
})) {
3556 push @$cpuFlags, split(";", $flags);
3560 push @$cpuFlags , '+lahf_lm' if $cpu eq 'kvm64' && $arch eq 'x86_64';
3562 push @$cpuFlags , '-x2apic'
3563 if $conf->{ostype
} && $conf->{ostype
} eq 'solaris';
3565 push @$cpuFlags, '+sep' if $cpu eq 'kvm64' || $cpu eq 'kvm32';
3567 push @$cpuFlags, '-rdtscp' if $cpu =~ m/^Opteron/;
3569 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3) && $arch eq 'x86_64') {
3571 push @$cpuFlags , '+kvm_pv_unhalt' if $kvm;
3572 push @$cpuFlags , '+kvm_pv_eoi' if $kvm;
3575 add_hyperv_enlightenments
($cpuFlags, $winversion, $machine_type, $kvmver, $conf->{bios
}, $gpu_passthrough, $hv_vendor_id) if $kvm;
3577 push @$cpuFlags, 'enforce' if $cpu ne 'host' && $kvm && $arch eq 'x86_64';
3579 push @$cpuFlags, 'kvm=off' if $kvm_off;
3581 if (my $cpu_vendor = $cpu_vendor_list->{$cpu}) {
3582 push @$cpuFlags, "vendor=${cpu_vendor}"
3583 if $cpu_vendor ne 'default';
3584 } elsif ($arch ne 'aarch64') {
3585 die "internal error"; # should not happen
3588 $cpu .= "," . join(',', @$cpuFlags) if scalar(@$cpuFlags);
3590 return ('-cpu', $cpu);
3593 sub config_to_command
{
3594 my ($storecfg, $vmid, $conf, $defaults, $forcemachine) = @_;
3597 my $globalFlags = [];
3598 my $machineFlags = [];
3603 my $vernum = 0; # unknown
3604 my $ostype = $conf->{ostype
};
3605 my $winversion = windows_version
($ostype);
3606 my $kvm = $conf->{kvm
};
3608 my ($arch, $machine_type) = get_basic_machine_info
($conf, $forcemachine);
3609 my $kvm_binary = get_command_for_arch
($arch);
3610 my $kvmver = kvm_user_version
($kvm_binary);
3611 $kvm //= 1 if is_native
($arch);
3614 die "KVM virtualisation configured, but not available. Either disable in VM configuration or enable in BIOS.\n"
3615 if !defined kvm_version
();
3618 if ($kvmver =~ m/^(\d+)\.(\d+)$/) {
3619 $vernum = $1*1000000+$2*1000;
3620 } elsif ($kvmver =~ m/^(\d+)\.(\d+)\.(\d+)$/) {
3621 $vernum = $1*1000000+$2*1000+$3;
3624 die "detected old qemu-kvm binary ($kvmver)\n" if $vernum < 15000;
3626 my $q35 = machine_type_is_q35
($conf);
3627 my $hotplug_features = parse_hotplug_features
(defined($conf->{hotplug
}) ?
$conf->{hotplug
} : '1');
3628 my $use_old_bios_files = undef;
3629 ($use_old_bios_files, $machine_type) = qemu_use_old_bios_files
($machine_type);
3631 my $cpuunits = defined($conf->{cpuunits
}) ?
3632 $conf->{cpuunits
} : $defaults->{cpuunits
};
3634 push @$cmd, $kvm_binary;
3636 push @$cmd, '-id', $vmid;
3638 my $vmname = $conf->{name
} || "vm$vmid";
3640 push @$cmd, '-name', $vmname;
3644 my $qmpsocket = qmp_socket
($vmid);
3645 push @$cmd, '-chardev', "socket,id=qmp,path=$qmpsocket,server,nowait";
3646 push @$cmd, '-mon', "chardev=qmp,mode=control";
3648 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 12)) {
3649 push @$cmd, '-chardev', "socket,id=qmp-event,path=/var/run/qmeventd.sock,reconnect=5";
3650 push @$cmd, '-mon', "chardev=qmp-event,mode=control";
3653 push @$cmd, '-pidfile' , pidfile_name
($vmid);
3655 push @$cmd, '-daemonize';
3657 if ($conf->{smbios1
}) {
3658 my $smbios_conf = parse_smbios1
($conf->{smbios1
});
3659 if ($smbios_conf->{base64
}) {
3660 # Do not pass base64 flag to qemu
3661 delete $smbios_conf->{base64
};
3662 my $smbios_string = "";
3663 foreach my $key (keys %$smbios_conf) {
3665 if ($key eq "uuid") {
3666 $value = $smbios_conf->{uuid
}
3668 $value = decode_base64
($smbios_conf->{$key});
3670 # qemu accepts any binary data, only commas need escaping by double comma
3672 $smbios_string .= "," . $key . "=" . $value if $value;
3674 push @$cmd, '-smbios', "type=1" . $smbios_string;
3676 push @$cmd, '-smbios', "type=1,$conf->{smbios1}";
3680 if ($conf->{vmgenid
}) {
3681 push @$devices, '-device', 'vmgenid,guid='.$conf->{vmgenid
};
3684 my ($ovmf_code, $ovmf_vars) = get_ovmf_files
($arch);
3685 if ($conf->{bios
} && $conf->{bios
} eq 'ovmf') {
3686 die "uefi base image not found\n" if ! -f
$ovmf_code;
3690 if (my $efidisk = $conf->{efidisk0
}) {
3691 my $d = PVE
::JSONSchema
::parse_property_string
($efidisk_fmt, $efidisk);
3692 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($d->{file
}, 1);
3693 $format = $d->{format
};
3695 $path = PVE
::Storage
::path
($storecfg, $d->{file
});
3696 if (!defined($format)) {
3697 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
3698 $format = qemu_img_format
($scfg, $volname);
3702 die "efidisk format must be specified\n"
3703 if !defined($format);
3706 warn "no efidisk configured! Using temporary efivars disk.\n";
3707 $path = "/tmp/$vmid-ovmf.fd";
3708 PVE
::Tools
::file_copy
($ovmf_vars, $path, -s
$ovmf_vars);
3712 push @$cmd, '-drive', "if=pflash,unit=0,format=raw,readonly,file=$ovmf_code";
3713 push @$cmd, '-drive', "if=pflash,unit=1,format=$format,id=drive-efidisk0,file=$path";
3718 # we use different pcie-port hardware for qemu >= 4.0 for passthrough
3719 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 4, 0)) {
3720 push @$devices, '-readconfig', '/usr/share/qemu-server/pve-q35-4.0.cfg';
3722 push @$devices, '-readconfig', '/usr/share/qemu-server/pve-q35.cfg';
3726 # add usb controllers
3727 my @usbcontrollers = PVE
::QemuServer
::USB
::get_usb_controllers
($conf, $bridges, $arch, $machine_type, $usbdesc->{format
}, $MAX_USB_DEVICES);
3728 push @$devices, @usbcontrollers if @usbcontrollers;
3729 my $vga = parse_vga
($conf->{vga
});
3731 my $qxlnum = vga_conf_has_spice
($conf->{vga
});
3732 $vga->{type
} = 'qxl' if $qxlnum;
3734 if (!$vga->{type
}) {
3735 if ($arch eq 'aarch64') {
3736 $vga->{type
} = 'virtio';
3737 } elsif (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 9)) {
3738 $vga->{type
} = (!$winversion || $winversion >= 6) ?
'std' : 'cirrus';
3740 $vga->{type
} = ($winversion >= 6) ?
'std' : 'cirrus';
3744 # enable absolute mouse coordinates (needed by vnc)
3746 if (defined($conf->{tablet
})) {
3747 $tablet = $conf->{tablet
};
3749 $tablet = $defaults->{tablet
};
3750 $tablet = 0 if $qxlnum; # disable for spice because it is not needed
3751 $tablet = 0 if $vga->{type
} =~ m/^serial\d+$/; # disable if we use serial terminal (no vga card)
3755 push @$devices, '-device', print_tabletdevice_full
($conf, $arch) if $tablet;
3756 my $kbd = print_keyboarddevice_full
($conf, $arch);
3757 push @$devices, '-device', $kbd if defined($kbd);
3761 my $gpu_passthrough;
3764 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
3765 my $id = "hostpci$i";
3766 my $d = parse_hostpci
($conf->{$id});
3769 if (my $pcie = $d->{pcie
}) {
3770 die "q35 machine model is not enabled" if !$q35;
3771 # win7 wants to have the pcie devices directly on the pcie bus
3772 # instead of in the root port
3773 if ($winversion == 7) {
3774 $pciaddr = print_pcie_addr
("${id}bus0");
3776 # add more root ports if needed, 4 are present by default
3777 # by pve-q35 cfgs, rest added here on demand.
3779 push @$devices, '-device', print_pcie_root_port
($i);
3781 $pciaddr = print_pcie_addr
($id);
3784 $pciaddr = print_pci_addr
($id, $bridges, $arch, $machine_type);
3788 if ($d->{'x-vga'}) {
3789 $xvga = ',x-vga=on' if !($conf->{bios
} && $conf->{bios
} eq 'ovmf');
3791 $vga->{type
} = 'none' if !defined($conf->{vga
});
3792 $gpu_passthrough = 1;
3795 my $pcidevices = $d->{pciid
};
3796 my $multifunction = 1 if @$pcidevices > 1;
3799 if ($d->{mdev
} && scalar(@$pcidevices) == 1) {
3800 my $pci_id = $pcidevices->[0]->{id
};
3801 my $uuid = PVE
::SysFSTools
::generate_mdev_uuid
($vmid, $i);
3802 $sysfspath = "/sys/bus/pci/devices/0000:$pci_id/$uuid";
3803 } elsif ($d->{mdev
}) {
3804 warn "ignoring mediated device '$id' with multifunction device\n";
3808 foreach my $pcidevice (@$pcidevices) {
3809 my $devicestr = "vfio-pci";
3812 $devicestr .= ",sysfsdev=$sysfspath";
3814 $devicestr .= ",host=$pcidevice->{id}";
3817 my $mf_addr = $multifunction ?
".$j" : '';
3818 $devicestr .= ",id=${id}${mf_addr}${pciaddr}${mf_addr}";
3821 $devicestr .= ',rombar=0' if defined($d->{rombar
}) && !$d->{rombar
};
3822 $devicestr .= "$xvga";
3823 $devicestr .= ",multifunction=on" if $multifunction;
3824 $devicestr .= ",romfile=/usr/share/kvm/$d->{romfile}" if $d->{romfile
};
3827 push @$devices, '-device', $devicestr;
3833 my $usb_dev_features = {};
3834 $usb_dev_features->{spice_usb3
} = 1 if qemu_machine_feature_enabled
($machine_type, $kvmver, 4, 0);
3836 my @usbdevices = PVE
::QemuServer
::USB
::get_usb_devices
($conf, $usbdesc->{format
}, $MAX_USB_DEVICES, $usb_dev_features);
3837 push @$devices, @usbdevices if @usbdevices;
3839 for (my $i = 0; $i < $MAX_SERIAL_PORTS; $i++) {
3840 if (my $path = $conf->{"serial$i"}) {
3841 if ($path eq 'socket') {
3842 my $socket = "/var/run/qemu-server/${vmid}.serial$i";
3843 push @$devices, '-chardev', "socket,id=serial$i,path=$socket,server,nowait";
3844 # On aarch64, serial0 is the UART device. Qemu only allows
3845 # connecting UART devices via the '-serial' command line, as
3846 # the device has a fixed slot on the hardware...
3847 if ($arch eq 'aarch64' && $i == 0) {
3848 push @$devices, '-serial', "chardev:serial$i";
3850 push @$devices, '-device', "isa-serial,chardev=serial$i";
3853 die "no such serial device\n" if ! -c
$path;
3854 push @$devices, '-chardev', "tty,id=serial$i,path=$path";
3855 push @$devices, '-device', "isa-serial,chardev=serial$i";
3861 for (my $i = 0; $i < $MAX_PARALLEL_PORTS; $i++) {
3862 if (my $path = $conf->{"parallel$i"}) {
3863 die "no such parallel device\n" if ! -c
$path;
3864 my $devtype = $path =~ m!^/dev/usb/lp! ?
'tty' : 'parport';
3865 push @$devices, '-chardev', "$devtype,id=parallel$i,path=$path";
3866 push @$devices, '-device', "isa-parallel,chardev=parallel$i";
3870 if (my $audio = conf_has_audio
($conf)) {
3872 my $audiopciaddr = print_pci_addr
("audio0", $bridges, $arch, $machine_type);
3874 my $id = $audio->{dev_id
};
3875 if ($audio->{dev
} eq 'AC97') {
3876 push @$devices, '-device', "AC97,id=${id}${audiopciaddr}";
3877 } elsif ($audio->{dev
} =~ /intel\-hda$/) {
3878 push @$devices, '-device', "$audio->{dev},id=${id}${audiopciaddr}";
3879 push @$devices, '-device', "hda-micro,id=${id}-codec0,bus=${id}.0,cad=0";
3880 push @$devices, '-device', "hda-duplex,id=${id}-codec1,bus=${id}.0,cad=1";
3882 die "unkown audio device '$audio->{dev}', implement me!";
3885 push @$devices, '-audiodev', "$audio->{backend},id=$audio->{backend_id}";
3889 $sockets = $conf->{smp
} if $conf->{smp
}; # old style - no longer iused
3890 $sockets = $conf->{sockets
} if $conf->{sockets
};
3892 my $cores = $conf->{cores
} || 1;
3894 my $maxcpus = $sockets * $cores;
3896 my $vcpus = $conf->{vcpus
} ?
$conf->{vcpus
} : $maxcpus;
3898 my $allowed_vcpus = $cpuinfo->{cpus
};
3900 die "MAX $allowed_vcpus vcpus allowed per VM on this node\n"
3901 if ($allowed_vcpus < $maxcpus);
3903 if($hotplug_features->{cpu
} && qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 7)) {
3905 push @$cmd, '-smp', "1,sockets=$sockets,cores=$cores,maxcpus=$maxcpus";
3906 for (my $i = 2; $i <= $vcpus; $i++) {
3907 my $cpustr = print_cpu_device
($conf,$i);
3908 push @$cmd, '-device', $cpustr;
3913 push @$cmd, '-smp', "$vcpus,sockets=$sockets,cores=$cores,maxcpus=$maxcpus";
3915 push @$cmd, '-nodefaults';
3917 my $bootorder = $conf->{boot
} || $confdesc->{boot
}->{default};
3919 my $bootindex_hash = {};
3921 foreach my $o (split(//, $bootorder)) {
3922 $bootindex_hash->{$o} = $i*100;
3926 push @$cmd, '-boot', "menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg";
3928 push @$cmd, '-no-acpi' if defined($conf->{acpi
}) && $conf->{acpi
} == 0;
3930 push @$cmd, '-no-reboot' if defined($conf->{reboot
}) && $conf->{reboot
} == 0;
3932 if ($vga->{type
} && $vga->{type
} !~ m/^serial\d+$/ && $vga->{type
} ne 'none'){
3933 push @$devices, '-device', print_vga_device
($conf, $vga, $arch, $machine_type, undef, $qxlnum, $bridges);
3934 my $socket = vnc_socket
($vmid);
3935 push @$cmd, '-vnc', "unix:$socket,password";
3937 push @$cmd, '-vga', 'none' if $vga->{type
} eq 'none';
3938 push @$cmd, '-nographic';
3942 my $tdf = defined($conf->{tdf
}) ?
$conf->{tdf
} : $defaults->{tdf
};
3944 my $useLocaltime = $conf->{localtime};
3946 if ($winversion >= 5) { # windows
3947 $useLocaltime = 1 if !defined($conf->{localtime});
3949 # use time drift fix when acpi is enabled
3950 if (!(defined($conf->{acpi
}) && $conf->{acpi
} == 0)) {
3951 $tdf = 1 if !defined($conf->{tdf
});
3955 if ($winversion >= 6) {
3956 push @$globalFlags, 'kvm-pit.lost_tick_policy=discard';
3957 push @$cmd, '-no-hpet';
3960 push @$rtcFlags, 'driftfix=slew' if $tdf;
3963 push @$machineFlags, 'accel=tcg';
3966 if ($machine_type) {
3967 push @$machineFlags, "type=${machine_type}";
3970 if (($conf->{startdate
}) && ($conf->{startdate
} ne 'now')) {
3971 push @$rtcFlags, "base=$conf->{startdate}";
3972 } elsif ($useLocaltime) {
3973 push @$rtcFlags, 'base=localtime';
3976 push @$cmd, get_cpu_options
($conf, $arch, $kvm, $machine_type, $kvm_off, $kvmver, $winversion, $gpu_passthrough);
3978 PVE
::QemuServer
::Memory
::config
($conf, $vmid, $sockets, $cores, $defaults, $hotplug_features, $cmd);
3980 push @$cmd, '-S' if $conf->{freeze
};
3982 push @$cmd, '-k', $conf->{keyboard
} if defined($conf->{keyboard
});
3984 if (parse_guest_agent
($conf)->{enabled
}) {
3985 my $qgasocket = qmp_socket
($vmid, 1);
3986 my $pciaddr = print_pci_addr
("qga0", $bridges, $arch, $machine_type);
3987 push @$devices, '-chardev', "socket,path=$qgasocket,server,nowait,id=qga0";
3988 push @$devices, '-device', "virtio-serial,id=qga0$pciaddr";
3989 push @$devices, '-device', 'virtserialport,chardev=qga0,name=org.qemu.guest_agent.0';
3997 for(my $i = 1; $i < $qxlnum; $i++){
3998 push @$devices, '-device', print_vga_device
($conf, $vga, $arch, $machine_type, $i, $qxlnum, $bridges);
4001 # assume other OS works like Linux
4002 my ($ram, $vram) = ("134217728", "67108864");
4003 if ($vga->{memory
}) {
4004 $ram = PVE
::Tools
::convert_size
($qxlnum*4*$vga->{memory
}, 'mb' => 'b');
4005 $vram = PVE
::Tools
::convert_size
($qxlnum*2*$vga->{memory
}, 'mb' => 'b');
4007 push @$cmd, '-global', "qxl-vga.ram_size=$ram";
4008 push @$cmd, '-global', "qxl-vga.vram_size=$vram";
4012 my $pciaddr = print_pci_addr
("spice", $bridges, $arch, $machine_type);
4014 my $nodename = PVE
::INotify
::nodename
();
4015 my $pfamily = PVE
::Tools
::get_host_address_family
($nodename);
4016 my @nodeaddrs = PVE
::Tools
::getaddrinfo_all
('localhost', family
=> $pfamily);
4017 die "failed to get an ip address of type $pfamily for 'localhost'\n" if !@nodeaddrs;
4019 push @$devices, '-device', "virtio-serial,id=spice$pciaddr";
4020 push @$devices, '-chardev', "spicevmc,id=vdagent,name=vdagent";
4021 push @$devices, '-device', "virtserialport,chardev=vdagent,name=com.redhat.spice.0";
4023 my $localhost = PVE
::Network
::addr_to_ip
($nodeaddrs[0]->{addr
});
4024 $spice_port = PVE
::Tools
::next_spice_port
($pfamily, $localhost);
4026 my $spice_enhancement = PVE
::JSONSchema
::parse_property_string
($spice_enhancements_fmt, $conf->{spice_enhancements
} // '');
4027 if ($spice_enhancement->{foldersharing
}) {
4028 push @$devices, '-chardev', "spiceport,id=foldershare,name=org.spice-space.webdav.0";
4029 push @$devices, '-device', "virtserialport,chardev=foldershare,name=org.spice-space.webdav.0";
4032 my $spice_opts = "tls-port=${spice_port},addr=$localhost,tls-ciphers=HIGH,seamless-migration=on";
4033 $spice_opts .= ",streaming-video=$spice_enhancement->{videostreaming}" if $spice_enhancement->{videostreaming
};
4034 push @$devices, '-spice', "$spice_opts";
4037 # enable balloon by default, unless explicitly disabled
4038 if (!defined($conf->{balloon
}) || $conf->{balloon
}) {
4039 $pciaddr = print_pci_addr
("balloon0", $bridges, $arch, $machine_type);
4040 push @$devices, '-device', "virtio-balloon-pci,id=balloon0$pciaddr";
4043 if ($conf->{watchdog
}) {
4044 my $wdopts = parse_watchdog
($conf->{watchdog
});
4045 $pciaddr = print_pci_addr
("watchdog", $bridges, $arch, $machine_type);
4046 my $watchdog = $wdopts->{model
} || 'i6300esb';
4047 push @$devices, '-device', "$watchdog$pciaddr";
4048 push @$devices, '-watchdog-action', $wdopts->{action
} if $wdopts->{action
};
4052 my $scsicontroller = {};
4053 my $ahcicontroller = {};
4054 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : $defaults->{scsihw
};
4056 # Add iscsi initiator name if available
4057 if (my $initiator = get_initiator_name
()) {
4058 push @$devices, '-iscsi', "initiator-name=$initiator";
4061 foreach_drive
($conf, sub {
4062 my ($ds, $drive) = @_;
4064 if (PVE
::Storage
::parse_volume_id
($drive->{file
}, 1)) {
4065 push @$vollist, $drive->{file
};
4068 # ignore efidisk here, already added in bios/fw handling code above
4069 return if $drive->{interface
} eq 'efidisk';
4071 $use_virtio = 1 if $ds =~ m/^virtio/;
4073 if (drive_is_cdrom
($drive)) {
4074 if ($bootindex_hash->{d
}) {
4075 $drive->{bootindex
} = $bootindex_hash->{d
};
4076 $bootindex_hash->{d
} += 1;
4079 if ($bootindex_hash->{c
}) {
4080 $drive->{bootindex
} = $bootindex_hash->{c
} if $conf->{bootdisk
} && ($conf->{bootdisk
} eq $ds);
4081 $bootindex_hash->{c
} += 1;
4085 if($drive->{interface
} eq 'virtio'){
4086 push @$cmd, '-object', "iothread,id=iothread-$ds" if $drive->{iothread
};
4089 if ($drive->{interface
} eq 'scsi') {
4091 my ($maxdev, $controller, $controller_prefix) = scsihw_infos
($conf, $drive);
4093 $pciaddr = print_pci_addr
("$controller_prefix$controller", $bridges, $arch, $machine_type);
4094 my $scsihw_type = $scsihw =~ m/^virtio-scsi-single/ ?
"virtio-scsi-pci" : $scsihw;
4097 if($conf->{scsihw
} && $conf->{scsihw
} eq "virtio-scsi-single" && $drive->{iothread
}){
4098 $iothread .= ",iothread=iothread-$controller_prefix$controller";
4099 push @$cmd, '-object', "iothread,id=iothread-$controller_prefix$controller";
4100 } elsif ($drive->{iothread
}) {
4101 warn "iothread is only valid with virtio disk or virtio-scsi-single controller, ignoring\n";
4105 if($conf->{scsihw
} && $conf->{scsihw
} eq "virtio-scsi-single" && $drive->{queues
}){
4106 $queues = ",num_queues=$drive->{queues}";
4109 push @$devices, '-device', "$scsihw_type,id=$controller_prefix$controller$pciaddr$iothread$queues" if !$scsicontroller->{$controller};
4110 $scsicontroller->{$controller}=1;
4113 if ($drive->{interface
} eq 'sata') {
4114 my $controller = int($drive->{index} / $MAX_SATA_DISKS);
4115 $pciaddr = print_pci_addr
("ahci$controller", $bridges, $arch, $machine_type);
4116 push @$devices, '-device', "ahci,id=ahci$controller,multifunction=on$pciaddr" if !$ahcicontroller->{$controller};
4117 $ahcicontroller->{$controller}=1;
4120 my $drive_cmd = print_drive_full
($storecfg, $vmid, $drive);
4121 push @$devices, '-drive',$drive_cmd;
4122 push @$devices, '-device', print_drivedevice_full
($storecfg, $conf, $vmid, $drive, $bridges, $arch, $machine_type);
4125 for (my $i = 0; $i < $MAX_NETS; $i++) {
4126 next if !$conf->{"net$i"};
4127 my $d = parse_net
($conf->{"net$i"});
4130 $use_virtio = 1 if $d->{model
} eq 'virtio';
4132 if ($bootindex_hash->{n
}) {
4133 $d->{bootindex
} = $bootindex_hash->{n
};
4134 $bootindex_hash->{n
} += 1;
4137 my $netdevfull = print_netdev_full
($vmid, $conf, $arch, $d, "net$i");
4138 push @$devices, '-netdev', $netdevfull;
4140 my $netdevicefull = print_netdevice_full
($vmid, $conf, $d, "net$i", $bridges, $use_old_bios_files, $arch, $machine_type);
4141 push @$devices, '-device', $netdevicefull;
4144 if ($conf->{ivshmem
}) {
4145 my $ivshmem = PVE
::JSONSchema
::parse_property_string
($ivshmem_fmt, $conf->{ivshmem
});
4149 $bus = print_pcie_addr
("ivshmem");
4151 $bus = print_pci_addr
("ivshmem", $bridges, $arch, $machine_type);
4154 my $ivshmem_name = $ivshmem->{name
} // $vmid;
4155 my $path = '/dev/shm/pve-shm-' . $ivshmem_name;
4157 push @$devices, '-device', "ivshmem-plain,memdev=ivshmem$bus,";
4158 push @$devices, '-object', "memory-backend-file,id=ivshmem,share=on,mem-path=$path,size=$ivshmem->{size}M";
4163 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3)) {
4168 $bridges->{3} = 1 if $scsihw =~ m/^virtio-scsi-single/;
4170 for my $k (sort {$b cmp $a} keys %$bridges) {
4171 $pciaddr = print_pci_addr
("pci.$k", undef, $arch, $machine_type);
4172 unshift @$devices, '-device', "pci-bridge,id=pci.$k,chassis_nr=$k$pciaddr" if $k > 0;
4176 push @$cmd, @$devices;
4177 push @$cmd, '-rtc', join(',', @$rtcFlags)
4178 if scalar(@$rtcFlags);
4179 push @$cmd, '-machine', join(',', @$machineFlags)
4180 if scalar(@$machineFlags);
4181 push @$cmd, '-global', join(',', @$globalFlags)
4182 if scalar(@$globalFlags);
4184 if (my $vmstate = $conf->{vmstate
}) {
4185 my $statepath = PVE
::Storage
::path
($storecfg, $vmstate);
4186 PVE
::Storage
::activate_volumes
($storecfg, [$vmstate]);
4187 push @$cmd, '-loadstate', $statepath;
4191 if ($conf->{args
}) {
4192 my $aa = PVE
::Tools
::split_args
($conf->{args
});
4196 return wantarray ?
($cmd, $vollist, $spice_port) : $cmd;
4201 return "${var_run_tmpdir}/$vmid.vnc";
4207 my $res = vm_mon_cmd
($vmid, 'query-spice');
4209 return $res->{'tls-port'} || $res->{'port'} || die "no spice port\n";
4213 my ($vmid, $qga, $name) = @_;
4214 my $sockettype = $qga ?
'qga' : 'qmp';
4215 my $ext = $name ?
'-'.$name : '';
4216 return "${var_run_tmpdir}/$vmid$ext.$sockettype";
4221 return "${var_run_tmpdir}/$vmid.pid";
4224 sub vm_devices_list
{
4227 my $res = vm_mon_cmd
($vmid, 'query-pci');
4228 my $devices_to_check = [];
4230 foreach my $pcibus (@$res) {
4231 push @$devices_to_check, @{$pcibus->{devices
}},
4234 while (@$devices_to_check) {
4236 for my $d (@$devices_to_check) {
4237 $devices->{$d->{'qdev_id'}} = 1 if $d->{'qdev_id'};
4238 next if !$d->{'pci_bridge'};
4240 $devices->{$d->{'qdev_id'}} += scalar(@{$d->{'pci_bridge'}->{devices
}});
4241 push @$to_check, @{$d->{'pci_bridge'}->{devices
}};
4243 $devices_to_check = $to_check;
4246 my $resblock = vm_mon_cmd
($vmid, 'query-block');
4247 foreach my $block (@$resblock) {
4248 if($block->{device
} =~ m/^drive-(\S+)/){
4253 my $resmice = vm_mon_cmd
($vmid, 'query-mice');
4254 foreach my $mice (@$resmice) {
4255 if ($mice->{name
} eq 'QEMU HID Tablet') {
4256 $devices->{tablet
} = 1;
4261 # for usb devices there is no query-usb
4262 # but we can iterate over the entries in
4263 # qom-list path=/machine/peripheral
4264 my $resperipheral = vm_mon_cmd
($vmid, 'qom-list', path
=> '/machine/peripheral');
4265 foreach my $per (@$resperipheral) {
4266 if ($per->{name
} =~ m/^usb\d+$/) {
4267 $devices->{$per->{name
}} = 1;
4275 my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
4277 my $q35 = machine_type_is_q35
($conf);
4279 my $devices_list = vm_devices_list
($vmid);
4280 return 1 if defined($devices_list->{$deviceid});
4282 qemu_add_pci_bridge
($storecfg, $conf, $vmid, $deviceid, $arch, $machine_type); # add PCI bridge if we need it for the device
4284 if ($deviceid eq 'tablet') {
4286 qemu_deviceadd
($vmid, print_tabletdevice_full
($conf, $arch));
4288 } elsif ($deviceid eq 'keyboard') {
4290 qemu_deviceadd
($vmid, print_keyboarddevice_full
($conf, $arch));
4292 } elsif ($deviceid =~ m/^usb(\d+)$/) {
4294 die "usb hotplug currently not reliable\n";
4295 # since we can't reliably hot unplug all added usb devices
4296 # and usb passthrough disables live migration
4297 # we disable usb hotplugging for now
4298 qemu_deviceadd
($vmid, PVE
::QemuServer
::USB
::print_usbdevice_full
($conf, $deviceid, $device));
4300 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
4302 qemu_iothread_add
($vmid, $deviceid, $device);
4304 qemu_driveadd
($storecfg, $vmid, $device);
4305 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device, $arch, $machine_type);
4307 qemu_deviceadd
($vmid, $devicefull);
4308 eval { qemu_deviceaddverify
($vmid, $deviceid); };
4310 eval { qemu_drivedel
($vmid, $deviceid); };
4315 } elsif ($deviceid =~ m/^(virtioscsi|scsihw)(\d+)$/) {
4318 my $scsihw = defined($conf->{scsihw
}) ?
$conf->{scsihw
} : "lsi";
4319 my $pciaddr = print_pci_addr
($deviceid, undef, $arch, $machine_type);
4320 my $scsihw_type = $scsihw eq 'virtio-scsi-single' ?
"virtio-scsi-pci" : $scsihw;
4322 my $devicefull = "$scsihw_type,id=$deviceid$pciaddr";
4324 if($deviceid =~ m/^virtioscsi(\d+)$/ && $device->{iothread
}) {
4325 qemu_iothread_add
($vmid, $deviceid, $device);
4326 $devicefull .= ",iothread=iothread-$deviceid";
4329 if($deviceid =~ m/^virtioscsi(\d+)$/ && $device->{queues
}) {
4330 $devicefull .= ",num_queues=$device->{queues}";
4333 qemu_deviceadd
($vmid, $devicefull);
4334 qemu_deviceaddverify
($vmid, $deviceid);
4336 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
4338 qemu_findorcreatescsihw
($storecfg,$conf, $vmid, $device, $arch, $machine_type);
4339 qemu_driveadd
($storecfg, $vmid, $device);
4341 my $devicefull = print_drivedevice_full
($storecfg, $conf, $vmid, $device, $arch, $machine_type);
4342 eval { qemu_deviceadd
($vmid, $devicefull); };
4344 eval { qemu_drivedel
($vmid, $deviceid); };
4349 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
4351 return undef if !qemu_netdevadd
($vmid, $conf, $arch, $device, $deviceid);
4353 my $machine_type = PVE
::QemuServer
::qemu_machine_pxe
($vmid, $conf);
4354 my $use_old_bios_files = undef;
4355 ($use_old_bios_files, $machine_type) = qemu_use_old_bios_files
($machine_type);
4357 my $netdevicefull = print_netdevice_full
($vmid, $conf, $device, $deviceid, undef, $use_old_bios_files, $arch, $machine_type);
4358 qemu_deviceadd
($vmid, $netdevicefull);
4360 qemu_deviceaddverify
($vmid, $deviceid);
4361 qemu_set_link_status
($vmid, $deviceid, !$device->{link_down
});
4364 eval { qemu_netdevdel
($vmid, $deviceid); };
4369 } elsif (!$q35 && $deviceid =~ m/^(pci\.)(\d+)$/) {
4372 my $pciaddr = print_pci_addr
($deviceid, undef, $arch, $machine_type);
4373 my $devicefull = "pci-bridge,id=pci.$bridgeid,chassis_nr=$bridgeid$pciaddr";
4375 qemu_deviceadd
($vmid, $devicefull);
4376 qemu_deviceaddverify
($vmid, $deviceid);
4379 die "can't hotplug device '$deviceid'\n";
4385 # fixme: this should raise exceptions on error!
4386 sub vm_deviceunplug
{
4387 my ($vmid, $conf, $deviceid) = @_;
4389 my $devices_list = vm_devices_list
($vmid);
4390 return 1 if !defined($devices_list->{$deviceid});
4392 die "can't unplug bootdisk" if $conf->{bootdisk
} && $conf->{bootdisk
} eq $deviceid;
4394 if ($deviceid eq 'tablet' || $deviceid eq 'keyboard') {
4396 qemu_devicedel
($vmid, $deviceid);
4398 } elsif ($deviceid =~ m/^usb\d+$/) {
4400 die "usb hotplug currently not reliable\n";
4401 # when unplugging usb devices this way,
4402 # there may be remaining usb controllers/hubs
4403 # so we disable it for now
4404 qemu_devicedel
($vmid, $deviceid);
4405 qemu_devicedelverify
($vmid, $deviceid);
4407 } elsif ($deviceid =~ m/^(virtio)(\d+)$/) {
4409 qemu_devicedel
($vmid, $deviceid);
4410 qemu_devicedelverify
($vmid, $deviceid);
4411 qemu_drivedel
($vmid, $deviceid);
4412 qemu_iothread_del
($conf, $vmid, $deviceid);
4414 } elsif ($deviceid =~ m/^(virtioscsi|scsihw)(\d+)$/) {
4416 qemu_devicedel
($vmid, $deviceid);
4417 qemu_devicedelverify
($vmid, $deviceid);
4418 qemu_iothread_del
($conf, $vmid, $deviceid);
4420 } elsif ($deviceid =~ m/^(scsi)(\d+)$/) {
4422 qemu_devicedel
($vmid, $deviceid);
4423 qemu_drivedel
($vmid, $deviceid);
4424 qemu_deletescsihw
($conf, $vmid, $deviceid);
4426 } elsif ($deviceid =~ m/^(net)(\d+)$/) {
4428 qemu_devicedel
($vmid, $deviceid);
4429 qemu_devicedelverify
($vmid, $deviceid);
4430 qemu_netdevdel
($vmid, $deviceid);
4433 die "can't unplug device '$deviceid'\n";
4439 sub qemu_deviceadd
{
4440 my ($vmid, $devicefull) = @_;
4442 $devicefull = "driver=".$devicefull;
4443 my %options = split(/[=,]/, $devicefull);
4445 vm_mon_cmd
($vmid, "device_add" , %options);
4448 sub qemu_devicedel
{
4449 my ($vmid, $deviceid) = @_;
4451 my $ret = vm_mon_cmd
($vmid, "device_del", id
=> $deviceid);
4454 sub qemu_iothread_add
{
4455 my($vmid, $deviceid, $device) = @_;
4457 if ($device->{iothread
}) {
4458 my $iothreads = vm_iothreads_list
($vmid);
4459 qemu_objectadd
($vmid, "iothread-$deviceid", "iothread") if !$iothreads->{"iothread-$deviceid"};
4463 sub qemu_iothread_del
{
4464 my($conf, $vmid, $deviceid) = @_;
4466 my $confid = $deviceid;
4467 if ($deviceid =~ m/^(?:virtioscsi|scsihw)(\d+)$/) {
4468 $confid = 'scsi' . $1;
4470 my $device = parse_drive
($confid, $conf->{$confid});
4471 if ($device->{iothread
}) {
4472 my $iothreads = vm_iothreads_list
($vmid);
4473 qemu_objectdel
($vmid, "iothread-$deviceid") if $iothreads->{"iothread-$deviceid"};
4477 sub qemu_objectadd
{
4478 my($vmid, $objectid, $qomtype) = @_;
4480 vm_mon_cmd
($vmid, "object-add", id
=> $objectid, "qom-type" => $qomtype);
4485 sub qemu_objectdel
{
4486 my($vmid, $objectid) = @_;
4488 vm_mon_cmd
($vmid, "object-del", id
=> $objectid);
4494 my ($storecfg, $vmid, $device) = @_;
4496 my $drive = print_drive_full
($storecfg, $vmid, $device);
4497 $drive =~ s/\\/\\\\/g;
4498 my $ret = vm_human_monitor_command
($vmid, "drive_add auto \"$drive\"");
4500 # If the command succeeds qemu prints: "OK
"
4501 return 1 if $ret =~ m/OK/s;
4503 die "adding drive failed
: $ret\n";
4507 my($vmid, $deviceid) = @_;
4509 my $ret = vm_human_monitor_command($vmid, "drive_del drive-
$deviceid");
4512 return 1 if $ret eq "";
4514 # NB: device not found errors mean the drive was auto-deleted and we ignore the error
4515 return 1 if $ret =~ m/Device \'.*?\' not found/s;
4517 die "deleting drive
$deviceid failed
: $ret\n";
4520 sub qemu_deviceaddverify {
4521 my ($vmid, $deviceid) = @_;
4523 for (my $i = 0; $i <= 5; $i++) {
4524 my $devices_list = vm_devices_list($vmid);
4525 return 1 if defined($devices_list->{$deviceid});
4529 die "error on hotplug device
'$deviceid'\n";
4533 sub qemu_devicedelverify {
4534 my ($vmid, $deviceid) = @_;
4536 # need to verify that the device is correctly removed as device_del
4537 # is async and empty return is not reliable
4539 for (my $i = 0; $i <= 5; $i++) {
4540 my $devices_list = vm_devices_list($vmid);
4541 return 1 if !defined($devices_list->{$deviceid});
4545 die "error on hot-unplugging device
'$deviceid'\n";
4548 sub qemu_findorcreatescsihw {
4549 my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
4551 my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $device);
4553 my $scsihwid="$controller_prefix$controller";
4554 my $devices_list = vm_devices_list($vmid);
4556 if(!defined($devices_list->{$scsihwid})) {
4557 vm_deviceplug($storecfg, $conf, $vmid, $scsihwid, $device, $arch, $machine_type);
4563 sub qemu_deletescsihw {
4564 my ($conf, $vmid, $opt) = @_;
4566 my $device = parse_drive($opt, $conf->{$opt});
4568 if ($conf->{scsihw} && ($conf->{scsihw} eq 'virtio-scsi-single')) {
4569 vm_deviceunplug($vmid, $conf, "virtioscsi
$device->{index}");
4573 my ($maxdev, $controller, $controller_prefix) = scsihw_infos($conf, $device);
4575 my $devices_list = vm_devices_list($vmid);
4576 foreach my $opt (keys %{$devices_list}) {
4577 if (PVE::QemuServer::is_valid_drivename($opt)) {
4578 my $drive = PVE::QemuServer::parse_drive($opt, $conf->{$opt});
4579 if($drive->{interface} eq 'scsi' && $drive->{index} < (($maxdev-1)*($controller+1))) {
4585 my $scsihwid="scsihw
$controller";
4587 vm_deviceunplug($vmid, $conf, $scsihwid);
4592 sub qemu_add_pci_bridge {
4593 my ($storecfg, $conf, $vmid, $device, $arch, $machine_type) = @_;
4599 print_pci_addr($device, $bridges, $arch, $machine_type);
4601 while (my ($k, $v) = each %$bridges) {
4604 return 1 if !defined($bridgeid) || $bridgeid < 1;
4606 my $bridge = "pci
.$bridgeid";
4607 my $devices_list = vm_devices_list($vmid);
4609 if (!defined($devices_list->{$bridge})) {
4610 vm_deviceplug($storecfg, $conf, $vmid, $bridge, $arch, $machine_type);
4616 sub qemu_set_link_status {
4617 my ($vmid, $device, $up) = @_;
4619 vm_mon_cmd($vmid, "set_link
", name => $device,
4620 up => $up ? JSON::true : JSON::false);
4623 sub qemu_netdevadd {
4624 my ($vmid, $conf, $arch, $device, $deviceid) = @_;
4626 my $netdev = print_netdev_full($vmid, $conf, $arch, $device, $deviceid, 1);
4627 my %options = split(/[=,]/, $netdev);
4629 vm_mon_cmd($vmid, "netdev_add
", %options);
4633 sub qemu_netdevdel {
4634 my ($vmid, $deviceid) = @_;
4636 vm_mon_cmd($vmid, "netdev_del
", id => $deviceid);
4639 sub qemu_usb_hotplug {
4640 my ($storecfg, $conf, $vmid, $deviceid, $device, $arch, $machine_type) = @_;
4644 # remove the old one first
4645 vm_deviceunplug($vmid, $conf, $deviceid);
4647 # check if xhci controller is necessary and available
4648 if ($device->{usb3}) {
4650 my $devicelist = vm_devices_list($vmid);
4652 if (!$devicelist->{xhci}) {
4653 my $pciaddr = print_pci_addr("xhci
", undef, $arch, $machine_type);
4654 qemu_deviceadd($vmid, "nec-usb-xhci
,id
=xhci
$pciaddr");
4657 my $d = parse_usb_device($device->{host});
4658 $d->{usb3} = $device->{usb3};
4661 vm_deviceplug($storecfg, $conf, $vmid, $deviceid, $d, $arch, $machine_type);
4664 sub qemu_cpu_hotplug {
4665 my ($vmid, $conf, $vcpus) = @_;
4667 my $machine_type = PVE::QemuServer::get_current_qemu_machine($vmid);
4670 $sockets = $conf->{smp} if $conf->{smp}; # old style - no longer iused
4671 $sockets = $conf->{sockets} if $conf->{sockets};
4672 my $cores = $conf->{cores} || 1;
4673 my $maxcpus = $sockets * $cores;
4675 $vcpus = $maxcpus if !$vcpus;
4677 die "you can
't add more vcpus than maxcpus\n"
4678 if $vcpus > $maxcpus;
4680 my $currentvcpus = $conf->{vcpus} || $maxcpus;
4682 if ($vcpus < $currentvcpus) {
4684 if (qemu_machine_feature_enabled ($machine_type, undef, 2, 7)) {
4686 for (my $i = $currentvcpus; $i > $vcpus; $i--) {
4687 qemu_devicedel($vmid, "cpu$i");
4689 my $currentrunningvcpus = undef;
4691 $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4692 last if scalar(@{$currentrunningvcpus}) == $i-1;
4693 raise_param_exc({ vcpus => "error unplugging cpu$i" }) if $retry > 5;
4697 #update conf after each succesfull cpu unplug
4698 $conf->{vcpus} = scalar(@{$currentrunningvcpus});
4699 PVE::QemuConfig->write_config($vmid, $conf);
4702 die "cpu hot-unplugging requires qemu version 2.7 or higher\n";
4708 my $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4709 die "vcpus in running vm does not match its configuration\n"
4710 if scalar(@{$currentrunningvcpus}) != $currentvcpus;
4712 if (qemu_machine_feature_enabled ($machine_type, undef, 2, 7)) {
4714 for (my $i = $currentvcpus+1; $i <= $vcpus; $i++) {
4715 my $cpustr = print_cpu_device($conf, $i);
4716 qemu_deviceadd($vmid, $cpustr);
4719 my $currentrunningvcpus = undef;
4721 $currentrunningvcpus = vm_mon_cmd($vmid, "query-cpus");
4722 last if scalar(@{$currentrunningvcpus}) == $i;
4723 raise_param_exc({ vcpus => "error hotplugging cpu$i" }) if $retry > 10;
4727 #update conf after each succesfull cpu hotplug
4728 $conf->{vcpus} = scalar(@{$currentrunningvcpus});
4729 PVE::QemuConfig->write_config($vmid, $conf);
4733 for (my $i = $currentvcpus; $i < $vcpus; $i++) {
4734 vm_mon_cmd($vmid, "cpu-add", id => int($i));
4739 sub qemu_block_set_io_throttle {
4740 my ($vmid, $deviceid,
4741 $bps, $bps_rd, $bps_wr, $iops, $iops_rd, $iops_wr,
4742 $bps_max, $bps_rd_max, $bps_wr_max, $iops_max, $iops_rd_max, $iops_wr_max,
4743 $bps_max_length, $bps_rd_max_length, $bps_wr_max_length,
4744 $iops_max_length, $iops_rd_max_length, $iops_wr_max_length) = @_;
4746 return if !check_running($vmid) ;
4748 vm_mon_cmd($vmid, "block_set_io_throttle", device => $deviceid,
4750 bps_rd => int($bps_rd),
4751 bps_wr => int($bps_wr),
4753 iops_rd => int($iops_rd),
4754 iops_wr => int($iops_wr),
4755 bps_max => int($bps_max),
4756 bps_rd_max => int($bps_rd_max),
4757 bps_wr_max => int($bps_wr_max),
4758 iops_max => int($iops_max),
4759 iops_rd_max => int($iops_rd_max),
4760 iops_wr_max => int($iops_wr_max),
4761 bps_max_length => int($bps_max_length),
4762 bps_rd_max_length => int($bps_rd_max_length),
4763 bps_wr_max_length => int($bps_wr_max_length),
4764 iops_max_length => int($iops_max_length),
4765 iops_rd_max_length => int($iops_rd_max_length),
4766 iops_wr_max_length => int($iops_wr_max_length),
4771 # old code, only used to shutdown old VM after update
4773 my ($fh, $timeout) = @_;
4775 my $sel = new IO::Select;
4782 while (scalar (@ready = $sel->can_read($timeout))) {
4784 if ($count = $fh->sysread($buf, 8192)) {
4785 if ($buf =~ /^(.*)\(qemu\) $/s) {
4792 if (!defined($count)) {
4799 die "monitor read timeout\n" if !scalar(@ready);
4804 sub qemu_block_resize {
4805 my ($vmid, $deviceid, $storecfg, $volid, $size) = @_;
4807 my $running = check_running($vmid);
4809 $size = 0 if !PVE::Storage::volume_resize($storecfg, $volid, $size, $running);
4811 return if !$running;
4813 vm_mon_cmd($vmid, "block_resize", device => $deviceid, size => int($size));
4817 sub qemu_volume_snapshot {
4818 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
4820 my $running = check_running($vmid);
4822 if ($running && do_snapshots_with_qemu($storecfg, $volid)){
4823 vm_mon_cmd($vmid, 'blockdev-snapshot-internal-sync
', device => $deviceid, name => $snap);
4825 PVE::Storage::volume_snapshot($storecfg, $volid, $snap);
4829 sub qemu_volume_snapshot_delete {
4830 my ($vmid, $deviceid, $storecfg, $volid, $snap) = @_;
4832 my $running = check_running($vmid);
4837 my $conf = PVE::QemuConfig->load_config($vmid);
4838 foreach_drive($conf, sub {
4839 my ($ds, $drive) = @_;
4840 $running = 1 if $drive->{file} eq $volid;
4844 if ($running && do_snapshots_with_qemu($storecfg, $volid)){
4845 vm_mon_cmd($vmid, 'blockdev-snapshot-delete-internal-sync
', device => $deviceid, name => $snap);
4847 PVE::Storage::volume_snapshot_delete($storecfg, $volid, $snap, $running);
4851 sub set_migration_caps {
4857 "auto-converge" => 1,
4859 "x-rdma-pin-all" => 0,
4864 my $supported_capabilities = vm_mon_cmd_nocheck($vmid, "query-migrate-capabilities");
4866 for my $supported_capability (@$supported_capabilities) {
4868 capability => $supported_capability->{capability},
4869 state => $enabled_cap->{$supported_capability->{capability}} ? JSON::true : JSON::false,
4873 vm_mon_cmd_nocheck($vmid, "migrate-set-capabilities", capabilities => $cap_ref);
4876 my $fast_plug_option = {
4884 'vmstatestorage
' => 1,
4888 # hotplug changes in [PENDING]
4889 # $selection hash can be used to only apply specified options, for
4890 # example: { cores => 1 } (only apply changed 'cores
')
4891 # $errors ref is used to return error messages
4892 sub vmconfig_hotplug_pending {
4893 my ($vmid, $conf, $storecfg, $selection, $errors) = @_;
4895 my $defaults = load_defaults();
4896 my ($arch, $machine_type) = get_basic_machine_info($conf, undef);
4898 # commit values which do not have any impact on running VM first
4899 # Note: those option cannot raise errors, we we do not care about
4900 # $selection and always apply them.
4902 my $add_error = sub {
4903 my ($opt, $msg) = @_;
4904 $errors->{$opt} = "hotplug problem - $msg";
4908 foreach my $opt (keys %{$conf->{pending}}) { # add/change
4909 if ($fast_plug_option->{$opt}) {
4910 $conf->{$opt} = $conf->{pending}->{$opt};
4911 delete $conf->{pending}->{$opt};
4917 PVE::QemuConfig->write_config($vmid, $conf);
4918 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4921 my $hotplug_features = parse_hotplug_features(defined($conf->{hotplug}) ? $conf->{hotplug} : '1');
4923 my $pending_delete_hash = split_flagged_list($conf->{pending}->{delete});
4924 while (my ($opt, $force) = each %$pending_delete_hash) {
4925 next if $selection && !$selection->{$opt};
4927 if ($opt eq 'hotplug
') {
4928 die "skip\n" if ($conf->{hotplug} =~ /memory/);
4929 } elsif ($opt eq 'tablet
') {
4930 die "skip\n" if !$hotplug_features->{usb};
4931 if ($defaults->{tablet}) {
4932 vm_deviceplug($storecfg, $conf, $vmid, 'tablet
', $arch, $machine_type);
4933 vm_deviceplug($storecfg, $conf, $vmid, 'keyboard
', $arch, $machine_type)
4934 if $arch eq 'aarch64
';
4936 vm_deviceunplug($vmid, $conf, 'tablet
');
4937 vm_deviceunplug($vmid, $conf, 'keyboard
') if $arch eq 'aarch64
';
4939 } elsif ($opt =~ m/^usb\d+/) {
4941 # since we cannot reliably hot unplug usb devices
4942 # we are disabling it
4943 die "skip\n" if !$hotplug_features->{usb} || $conf->{$opt} =~ m/spice/i;
4944 vm_deviceunplug($vmid, $conf, $opt);
4945 } elsif ($opt eq 'vcpus
') {
4946 die "skip\n" if !$hotplug_features->{cpu};
4947 qemu_cpu_hotplug($vmid, $conf, undef);
4948 } elsif ($opt eq 'balloon
') {
4949 # enable balloon device is not hotpluggable
4950 die "skip\n" if defined($conf->{balloon}) && $conf->{balloon} == 0;
4951 # here we reset the ballooning value to memory
4952 my $balloon = $conf->{memory} || $defaults->{memory};
4953 vm_mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
4954 } elsif ($fast_plug_option->{$opt}) {
4956 } elsif ($opt =~ m/^net(\d+)$/) {
4957 die "skip\n" if !$hotplug_features->{network};
4958 vm_deviceunplug($vmid, $conf, $opt);
4959 } elsif (is_valid_drivename($opt)) {
4960 die "skip\n" if !$hotplug_features->{disk} || $opt =~ m/(ide|sata)(\d+)/;
4961 vm_deviceunplug($vmid, $conf, $opt);
4962 vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
4963 } elsif ($opt =~ m/^memory$/) {
4964 die "skip\n" if !$hotplug_features->{memory};
4965 PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt);
4966 } elsif ($opt eq 'cpuunits
') {
4967 cgroups_write("cpu", $vmid, "cpu.shares", $defaults->{cpuunits});
4968 } elsif ($opt eq 'cpulimit
') {
4969 cgroups_write("cpu", $vmid, "cpu.cfs_quota_us", -1);
4975 &$add_error($opt, $err) if $err ne "skip\n";
4977 # save new config if hotplug was successful
4978 delete $conf->{$opt};
4979 vmconfig_undelete_pending_option($conf, $opt);
4980 PVE::QemuConfig->write_config($vmid, $conf);
4981 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
4985 my $apply_pending_cloudinit;
4986 $apply_pending_cloudinit = sub {
4987 my ($key, $value) = @_;
4988 $apply_pending_cloudinit = sub {}; # once is enough
4990 my @cloudinit_opts = keys %$confdesc_cloudinit;
4991 foreach my $opt (keys %{$conf->{pending}}) {
4992 next if !grep { $_ eq $opt } @cloudinit_opts;
4993 $conf->{$opt} = delete $conf->{pending}->{$opt};
4996 my $new_conf = { %$conf };
4997 $new_conf->{$key} = $value;
4998 PVE::QemuServer::Cloudinit::generate_cloudinitconfig($new_conf, $vmid);
5001 foreach my $opt (keys %{$conf->{pending}}) {
5002 next if $selection && !$selection->{$opt};
5003 my $value = $conf->{pending}->{$opt};
5005 if ($opt eq 'hotplug
') {
5006 die "skip\n" if ($value =~ /memory/) || ($value !~ /memory/ && $conf->{hotplug} =~ /memory/);
5007 } elsif ($opt eq 'tablet
') {
5008 die "skip\n" if !$hotplug_features->{usb};
5010 vm_deviceplug($storecfg, $conf, $vmid, 'tablet
', $arch, $machine_type);
5011 vm_deviceplug($storecfg, $conf, $vmid, 'keyboard
', $arch, $machine_type)
5012 if $arch eq 'aarch64
';
5013 } elsif ($value == 0) {
5014 vm_deviceunplug($vmid, $conf, 'tablet
');
5015 vm_deviceunplug($vmid, $conf, 'keyboard
') if $arch eq 'aarch64
';
5017 } elsif ($opt =~ m/^usb\d+$/) {
5019 # since we cannot reliably hot unplug usb devices
5020 # we are disabling it
5021 die "skip\n" if !$hotplug_features->{usb} || $value =~ m/spice/i;
5022 my $d = eval { PVE::JSONSchema::parse_property_string($usbdesc->{format}, $value) };
5023 die "skip\n" if !$d;
5024 qemu_usb_hotplug($storecfg, $conf, $vmid, $opt, $d, $arch, $machine_type);
5025 } elsif ($opt eq 'vcpus
') {
5026 die "skip\n" if !$hotplug_features->{cpu};
5027 qemu_cpu_hotplug($vmid, $conf, $value);
5028 } elsif ($opt eq 'balloon
') {
5029 # enable/disable balloning device is not hotpluggable
5030 my $old_balloon_enabled = !!(!defined($conf->{balloon}) || $conf->{balloon});
5031 my $new_balloon_enabled = !!(!defined($conf->{pending}->{balloon}) || $conf->{pending}->{balloon});
5032 die "skip\n" if $old_balloon_enabled != $new_balloon_enabled;
5034 # allow manual ballooning if shares is set to zero
5035 if ((defined($conf->{shares}) && ($conf->{shares} == 0))) {
5036 my $balloon = $conf->{pending}->{balloon} || $conf->{memory} || $defaults->{memory};
5037 vm_mon_cmd($vmid, "balloon", value => $balloon*1024*1024);
5039 } elsif ($opt =~ m/^net(\d+)$/) {
5040 # some changes can be done without hotplug
5041 vmconfig_update_net($storecfg, $conf, $hotplug_features->{network},
5042 $vmid, $opt, $value, $arch, $machine_type);
5043 } elsif (is_valid_drivename($opt)) {
5044 # some changes can be done without hotplug
5045 my $drive = parse_drive($opt, $value);
5046 if (drive_is_cloudinit($drive)) {
5047 &$apply_pending_cloudinit($opt, $value);
5049 vmconfig_update_disk($storecfg, $conf, $hotplug_features->{disk},
5050 $vmid, $opt, $value, 1, $arch, $machine_type);
5051 } elsif ($opt =~ m/^memory$/) { #dimms
5052 die "skip\n" if !$hotplug_features->{memory};
5053 $value = PVE::QemuServer::Memory::qemu_memory_hotplug($vmid, $conf, $defaults, $opt, $value);
5054 } elsif ($opt eq 'cpuunits
') {
5055 cgroups_write("cpu", $vmid, "cpu.shares", $conf->{pending}->{$opt});
5056 } elsif ($opt eq 'cpulimit
') {
5057 my $cpulimit = $conf->{pending}->{$opt} == 0 ? -1 : int($conf->{pending}->{$opt} * 100000);
5058 cgroups_write("cpu", $vmid, "cpu.cfs_quota_us", $cpulimit);
5060 die "skip\n"; # skip non-hot-pluggable options
5064 &$add_error($opt, $err) if $err ne "skip\n";
5066 # save new config if hotplug was successful
5067 $conf->{$opt} = $value;
5068 delete $conf->{pending}->{$opt};
5069 PVE::QemuConfig->write_config($vmid, $conf);
5070 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5075 sub try_deallocate_drive {
5076 my ($storecfg, $vmid, $conf, $key, $drive, $rpcenv, $authuser, $force) = @_;
5078 if (($force || $key =~ /^unused/) && !drive_is_cdrom($drive, 1)) {
5079 my $volid = $drive->{file};
5080 if (vm_is_volid_owner($storecfg, $vmid, $volid)) {
5081 my $sid = PVE::Storage::parse_volume_id($volid);
5082 $rpcenv->check($authuser, "/storage/$sid", ['Datastore
.AllocateSpace
']);
5084 # check if the disk is really unused
5085 die "unable to delete '$volid' - volume is still in use (snapshot?)\n"
5086 if is_volume_in_use($storecfg, $conf, $key, $volid);
5087 PVE::Storage::vdisk_free($storecfg, $volid);
5090 # If vm is not owner of this disk remove from config
5098 sub vmconfig_delete_or_detach_drive {
5099 my ($vmid, $storecfg, $conf, $opt, $force) = @_;
5101 my $drive = parse_drive($opt, $conf->{$opt});
5103 my $rpcenv = PVE::RPCEnvironment::get();
5104 my $authuser = $rpcenv->get_user();
5107 $rpcenv->check_vm_perm($authuser, $vmid, undef, ['VM
.Config
.Disk
']);
5108 try_deallocate_drive($storecfg, $vmid, $conf, $opt, $drive, $rpcenv, $authuser, $force);
5110 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $drive);
5114 sub vmconfig_apply_pending {
5115 my ($vmid, $conf, $storecfg) = @_;
5119 my $pending_delete_hash = split_flagged_list($conf->{pending}->{delete});
5120 while (my ($opt, $force) = each %$pending_delete_hash) {
5121 die "internal error" if $opt =~ m/^unused/;
5122 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5123 if (!defined($conf->{$opt})) {
5124 vmconfig_undelete_pending_option($conf, $opt);
5125 PVE::QemuConfig->write_config($vmid, $conf);
5126 } elsif (is_valid_drivename($opt)) {
5127 vmconfig_delete_or_detach_drive($vmid, $storecfg, $conf, $opt, $force);
5128 vmconfig_undelete_pending_option($conf, $opt);
5129 delete $conf->{$opt};
5130 PVE::QemuConfig->write_config($vmid, $conf);
5132 vmconfig_undelete_pending_option($conf, $opt);
5133 delete $conf->{$opt};
5134 PVE::QemuConfig->write_config($vmid, $conf);
5138 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5140 foreach my $opt (keys %{$conf->{pending}}) { # add/change
5141 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5143 if (defined($conf->{$opt}) && ($conf->{$opt} eq $conf->{pending}->{$opt})) {
5144 # skip if nothing changed
5145 } elsif (is_valid_drivename($opt)) {
5146 vmconfig_register_unused_drive($storecfg, $vmid, $conf, parse_drive($opt, $conf->{$opt}))
5147 if defined($conf->{$opt});
5148 $conf->{$opt} = $conf->{pending}->{$opt};
5150 $conf->{$opt} = $conf->{pending}->{$opt};
5153 delete $conf->{pending}->{$opt};
5154 PVE::QemuConfig->write_config($vmid, $conf);
5158 my $safe_num_ne = sub {
5161 return 0 if !defined($a) && !defined($b);
5162 return 1 if !defined($a);
5163 return 1 if !defined($b);
5168 my $safe_string_ne = sub {
5171 return 0 if !defined($a) && !defined($b);
5172 return 1 if !defined($a);
5173 return 1 if !defined($b);
5178 sub vmconfig_update_net {
5179 my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $arch, $machine_type) = @_;
5181 my $newnet = parse_net($value);
5183 if ($conf->{$opt}) {
5184 my $oldnet = parse_net($conf->{$opt});
5186 if (&$safe_string_ne($oldnet->{model}, $newnet->{model}) ||
5187 &$safe_string_ne($oldnet->{macaddr}, $newnet->{macaddr}) ||
5188 &$safe_num_ne($oldnet->{queues}, $newnet->{queues}) ||
5189 !($newnet->{bridge} && $oldnet->{bridge})) { # bridge/nat mode change
5191 # for non online change, we try to hot-unplug
5192 die "skip\n" if !$hotplug;
5193 vm_deviceunplug($vmid, $conf, $opt);
5196 die "internal error" if $opt !~ m/net(\d+)/;
5197 my $iface = "tap${vmid}i$1";
5199 if (&$safe_string_ne($oldnet->{bridge}, $newnet->{bridge}) ||
5200 &$safe_num_ne($oldnet->{tag}, $newnet->{tag}) ||
5201 &$safe_string_ne($oldnet->{trunks}, $newnet->{trunks}) ||
5202 &$safe_num_ne($oldnet->{firewall}, $newnet->{firewall})) {
5203 PVE::Network::tap_unplug($iface);
5204 PVE::Network::tap_plug($iface, $newnet->{bridge}, $newnet->{tag}, $newnet->{firewall}, $newnet->{trunks}, $newnet->{rate});
5205 } elsif (&$safe_num_ne($oldnet->{rate}, $newnet->{rate})) {
5206 # Rate can be applied on its own but any change above needs to
5207 # include the rate in tap_plug since OVS resets everything.
5208 PVE::Network::tap_rate_limit($iface, $newnet->{rate});
5211 if (&$safe_string_ne($oldnet->{link_down}, $newnet->{link_down})) {
5212 qemu_set_link_status($vmid, $opt, !$newnet->{link_down});
5220 vm_deviceplug($storecfg, $conf, $vmid, $opt, $newnet, $arch, $machine_type);
5226 sub vmconfig_update_disk {
5227 my ($storecfg, $conf, $hotplug, $vmid, $opt, $value, $force, $arch, $machine_type) = @_;
5229 # fixme: do we need force?
5231 my $drive = parse_drive($opt, $value);
5233 if ($conf->{$opt}) {
5235 if (my $old_drive = parse_drive($opt, $conf->{$opt})) {
5237 my $media = $drive->{media} || 'disk
';
5238 my $oldmedia = $old_drive->{media} || 'disk
';
5239 die "unable to change media type\n" if $media ne $oldmedia;
5241 if (!drive_is_cdrom($old_drive)) {
5243 if ($drive->{file} ne $old_drive->{file}) {
5245 die "skip\n" if !$hotplug;
5247 # unplug and register as unused
5248 vm_deviceunplug($vmid, $conf, $opt);
5249 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $old_drive)
5252 # update existing disk
5254 # skip non hotpluggable value
5255 if (&$safe_string_ne($drive->{discard}, $old_drive->{discard}) ||
5256 &$safe_string_ne($drive->{iothread}, $old_drive->{iothread}) ||
5257 &$safe_string_ne($drive->{queues}, $old_drive->{queues}) ||
5258 &$safe_string_ne($drive->{cache}, $old_drive->{cache})) {
5263 if (&$safe_num_ne($drive->{mbps}, $old_drive->{mbps}) ||
5264 &$safe_num_ne($drive->{mbps_rd}, $old_drive->{mbps_rd}) ||
5265 &$safe_num_ne($drive->{mbps_wr}, $old_drive->{mbps_wr}) ||
5266 &$safe_num_ne($drive->{iops}, $old_drive->{iops}) ||
5267 &$safe_num_ne($drive->{iops_rd}, $old_drive->{iops_rd}) ||
5268 &$safe_num_ne($drive->{iops_wr}, $old_drive->{iops_wr}) ||
5269 &$safe_num_ne($drive->{mbps_max}, $old_drive->{mbps_max}) ||
5270 &$safe_num_ne($drive->{mbps_rd_max}, $old_drive->{mbps_rd_max}) ||
5271 &$safe_num_ne($drive->{mbps_wr_max}, $old_drive->{mbps_wr_max}) ||
5272 &$safe_num_ne($drive->{iops_max}, $old_drive->{iops_max}) ||
5273 &$safe_num_ne($drive->{iops_rd_max}, $old_drive->{iops_rd_max}) ||
5274 &$safe_num_ne($drive->{iops_wr_max}, $old_drive->{iops_wr_max}) ||
5275 &$safe_num_ne($drive->{bps_max_length}, $old_drive->{bps_max_length}) ||
5276 &$safe_num_ne($drive->{bps_rd_max_length}, $old_drive->{bps_rd_max_length}) ||
5277 &$safe_num_ne($drive->{bps_wr_max_length}, $old_drive->{bps_wr_max_length}) ||
5278 &$safe_num_ne($drive->{iops_max_length}, $old_drive->{iops_max_length}) ||
5279 &$safe_num_ne($drive->{iops_rd_max_length}, $old_drive->{iops_rd_max_length}) ||
5280 &$safe_num_ne($drive->{iops_wr_max_length}, $old_drive->{iops_wr_max_length})) {
5282 qemu_block_set_io_throttle($vmid,"drive-$opt",
5283 ($drive->{mbps} || 0)*1024*1024,
5284 ($drive->{mbps_rd} || 0)*1024*1024,
5285 ($drive->{mbps_wr} || 0)*1024*1024,
5286 $drive->{iops} || 0,
5287 $drive->{iops_rd} || 0,
5288 $drive->{iops_wr} || 0,
5289 ($drive->{mbps_max} || 0)*1024*1024,
5290 ($drive->{mbps_rd_max} || 0)*1024*1024,
5291 ($drive->{mbps_wr_max} || 0)*1024*1024,
5292 $drive->{iops_max} || 0,
5293 $drive->{iops_rd_max} || 0,
5294 $drive->{iops_wr_max} || 0,
5295 $drive->{bps_max_length} || 1,
5296 $drive->{bps_rd_max_length} || 1,
5297 $drive->{bps_wr_max_length} || 1,
5298 $drive->{iops_max_length} || 1,
5299 $drive->{iops_rd_max_length} || 1,
5300 $drive->{iops_wr_max_length} || 1);
5309 if ($drive->{file} eq 'none
') {
5310 vm_mon_cmd($vmid, "eject",force => JSON::true,device => "drive-$opt");
5311 if (drive_is_cloudinit($old_drive)) {
5312 vmconfig_register_unused_drive($storecfg, $vmid, $conf, $old_drive);
5315 my $path = get_iso_path($storecfg, $vmid, $drive->{file});
5316 vm_mon_cmd($vmid, "eject", force => JSON::true,device => "drive-$opt"); # force eject if locked
5317 vm_mon_cmd($vmid, "change", device => "drive-$opt",target => "$path") if $path;
5325 die "skip\n" if !$hotplug || $opt =~ m/(ide|sata)(\d+)/;
5327 PVE::Storage::activate_volumes($storecfg, [$drive->{file}]) if $drive->{file} !~ m|^/dev/.+|;
5328 vm_deviceplug($storecfg, $conf, $vmid, $opt, $drive, $arch, $machine_type);
5332 my ($storecfg, $vmid, $statefile, $skiplock, $migratedfrom, $paused,
5333 $forcemachine, $spice_ticket, $migration_network, $migration_type, $targetstorage) = @_;
5335 PVE::QemuConfig->lock_config($vmid, sub {
5336 my $conf = PVE::QemuConfig->load_config($vmid, $migratedfrom);
5338 die "you can't start a vm
if it
's a template\n" if PVE::QemuConfig->is_template($conf);
5340 my $is_suspended = PVE::QemuConfig->has_lock($conf, 'suspended
');
5342 PVE::QemuConfig->check_lock($conf)
5343 if !($skiplock || $is_suspended);
5345 die "VM $vmid already running\n" if check_running($vmid, undef, $migratedfrom);
5347 # clean up leftover reboot request files
5348 eval { clear_reboot_request($vmid); };
5351 if (!$statefile && scalar(keys %{$conf->{pending}})) {
5352 vmconfig_apply_pending($vmid, $conf, $storecfg);
5353 $conf = PVE::QemuConfig->load_config($vmid); # update/reload
5356 PVE::QemuServer::Cloudinit::generate_cloudinitconfig($conf, $vmid);
5358 my $defaults = load_defaults();
5360 # set environment variable useful inside network script
5361 $ENV{PVE_MIGRATED_FROM} = $migratedfrom if $migratedfrom;
5363 my $local_volumes = {};
5365 if ($targetstorage) {
5366 foreach_drive($conf, sub {
5367 my ($ds, $drive) = @_;
5369 return if drive_is_cdrom($drive);
5371 my $volid = $drive->{file};
5375 my ($storeid, $volname) = PVE::Storage::parse_volume_id($volid);
5377 my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
5378 return if $scfg->{shared};
5379 $local_volumes->{$ds} = [$volid, $storeid, $volname];
5384 foreach my $opt (sort keys %$local_volumes) {
5386 my ($volid, $storeid, $volname) = @{$local_volumes->{$opt}};
5387 my $drive = parse_drive($opt, $conf->{$opt});
5389 #if remote storage is specified, use default format
5390 if ($targetstorage && $targetstorage ne "1") {
5391 $storeid = $targetstorage;
5392 my ($defFormat, $validFormats) = PVE::Storage::storage_default_format($storecfg, $storeid);
5393 $format = $defFormat;
5395 #else we use same format than original
5396 my $scfg = PVE::Storage::storage_config($storecfg, $storeid);
5397 $format = qemu_img_format($scfg, $volid);
5400 my $newvolid = PVE::Storage::vdisk_alloc($storecfg, $storeid, $vmid, $format, undef, ($drive->{size}/1024));
5401 my $newdrive = $drive;
5402 $newdrive->{format} = $format;
5403 $newdrive->{file} = $newvolid;
5404 my $drivestr = PVE::QemuServer::print_drive($vmid, $newdrive);
5405 $local_volumes->{$opt} = $drivestr;
5406 #pass drive to conf for command line
5407 $conf->{$opt} = $drivestr;
5411 PVE::GuestHelpers::exec_hookscript($conf, $vmid, 'pre-start
', 1);
5413 if ($is_suspended) {
5414 # enforce machine type on suspended vm to ensure HW compatibility
5415 $forcemachine = $conf->{runningmachine};
5416 print "Resuming suspended VM\n";
5419 my ($cmd, $vollist, $spice_port) = config_to_command($storecfg, $vmid, $conf, $defaults, $forcemachine);
5421 my $migrate_port = 0;
5424 if ($statefile eq 'tcp
') {
5425 my $localip = "localhost";
5426 my $datacenterconf = PVE::Cluster::cfs_read_file('datacenter
.cfg
');
5427 my $nodename = PVE::INotify::nodename();
5429 if (!defined($migration_type)) {
5430 if (defined($datacenterconf->{migration}->{type})) {
5431 $migration_type = $datacenterconf->{migration}->{type};
5433 $migration_type = 'secure
';
5437 if ($migration_type eq 'insecure
') {
5438 my $migrate_network_addr = PVE::Cluster::get_local_migration_ip($migration_network);
5439 if ($migrate_network_addr) {
5440 $localip = $migrate_network_addr;
5442 $localip = PVE::Cluster::remote_node_ip($nodename, 1);
5445 $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
5448 my $pfamily = PVE::Tools::get_host_address_family($nodename);
5449 $migrate_port = PVE::Tools::next_migrate_port($pfamily);
5450 $migrate_uri = "tcp:${localip}:${migrate_port}";
5451 push @$cmd, '-incoming
', $migrate_uri;
5454 } elsif ($statefile eq 'unix
') {
5455 # should be default for secure migrations as a ssh TCP forward
5456 # tunnel is not deterministic reliable ready and fails regurarly
5457 # to set up in time, so use UNIX socket forwards
5458 my $socket_addr = "/run/qemu-server/$vmid.migrate";
5459 unlink $socket_addr;
5461 $migrate_uri = "unix:$socket_addr";
5463 push @$cmd, '-incoming
', $migrate_uri;
5467 push @$cmd, '-loadstate
', $statefile;
5474 for (my $i = 0; $i < $MAX_HOSTPCI_DEVICES; $i++) {
5475 my $d = parse_hostpci($conf->{"hostpci$i"});
5477 my $pcidevices = $d->{pciid};
5478 foreach my $pcidevice (@$pcidevices) {
5479 my $pciid = $pcidevice->{id};
5481 my $info = PVE::SysFSTools::pci_device_info("0000:$pciid");
5482 die "IOMMU not present\n" if !PVE::SysFSTools::check_iommu_support();
5483 die "no pci device info for device '$pciid'\n" if !$info;
5486 my $uuid = PVE::SysFSTools::generate_mdev_uuid($vmid, $i);
5487 PVE::SysFSTools::pci_create_mdev_device($pciid, $uuid, $d->{mdev});
5489 die "can't unbind
/bind pci group to vfio
'$pciid'\n"
5490 if !PVE::SysFSTools::pci_dev_group_bind_to_vfio($pciid);
5491 die "can
't reset pci device '$pciid'\n"
5492 if $info->{has_fl_reset} and !PVE::SysFSTools::pci_dev_reset($info);
5497 PVE::Storage::activate_volumes($storecfg, $vollist);
5500 run_command(['/bin/systemctl
', 'stop
', "$vmid.scope"],
5501 outfunc => sub {}, errfunc => sub {});
5503 # Issues with the above 'stop
' not being fully completed are extremely rare, a very low
5504 # timeout should be more than enough here...
5505 PVE::Systemd::wait_for_unit_removed("$vmid.scope", 5);
5507 my $cpuunits = defined($conf->{cpuunits}) ? $conf->{cpuunits}
5508 : $defaults->{cpuunits};
5510 my $start_timeout = ($conf->{hugepages} || $is_suspended) ? 300 : 30;
5511 my %run_params = (timeout => $statefile ? undef : $start_timeout, umask => 0077);
5514 Slice => 'qemu
.slice
',
5516 CPUShares => $cpuunits
5519 if (my $cpulimit = $conf->{cpulimit}) {
5520 $properties{CPUQuota} = int($cpulimit * 100);
5522 $properties{timeout} = 10 if $statefile; # setting up the scope shoul be quick
5524 my $run_qemu = sub {
5525 PVE::Tools::run_fork sub {
5526 PVE::Systemd::enter_systemd_scope($vmid, "Proxmox VE VM $vmid", %properties);
5527 run_command($cmd, %run_params);
5531 if ($conf->{hugepages}) {
5534 my $hugepages_topology = PVE::QemuServer::Memory::hugepages_topology($conf);
5535 my $hugepages_host_topology = PVE::QemuServer::Memory::hugepages_host_topology();
5537 PVE::QemuServer::Memory::hugepages_mount();
5538 PVE::QemuServer::Memory::hugepages_allocate($hugepages_topology, $hugepages_host_topology);
5540 eval { $run_qemu->() };
5542 PVE::QemuServer::Memory::hugepages_reset($hugepages_host_topology);
5546 PVE::QemuServer::Memory::hugepages_pre_deallocate($hugepages_topology);
5548 eval { PVE::QemuServer::Memory::hugepages_update_locked($code); };
5551 eval { $run_qemu->() };
5555 # deactivate volumes if start fails
5556 eval { PVE::Storage::deactivate_volumes($storecfg, $vollist); };
5557 die "start failed: $err";
5560 print "migration listens on $migrate_uri\n" if $migrate_uri;
5562 if ($statefile && $statefile ne 'tcp
' && $statefile ne 'unix
') {
5563 eval { vm_mon_cmd_nocheck($vmid, "cont"); };
5567 #start nbd server for storage migration
5568 if ($targetstorage) {
5569 my $nodename = PVE::INotify::nodename();
5570 my $migrate_network_addr = PVE::Cluster::get_local_migration_ip($migration_network);
5571 my $localip = $migrate_network_addr ? $migrate_network_addr : PVE::Cluster::remote_node_ip($nodename, 1);
5572 my $pfamily = PVE::Tools::get_host_address_family($nodename);
5573 $migrate_port = PVE::Tools::next_migrate_port($pfamily);
5575 vm_mon_cmd_nocheck($vmid, "nbd-server-start", addr => { type => 'inet
', data => { host => "${localip}", port => "${migrate_port}" } } );
5577 $localip = "[$localip]" if Net::IP::ip_is_ipv6($localip);
5579 foreach my $opt (sort keys %$local_volumes) {
5580 my $volid = $local_volumes->{$opt};
5581 vm_mon_cmd_nocheck($vmid, "nbd-server-add", device => "drive-$opt", writable => JSON::true );
5582 my $migrate_storage_uri = "nbd:${localip}:${migrate_port}:exportname=drive-$opt";
5583 print "storage migration listens on $migrate_storage_uri volume:$volid\n";
5587 if ($migratedfrom) {
5589 set_migration_caps($vmid);
5594 print "spice listens on port $spice_port\n";
5595 if ($spice_ticket) {
5596 vm_mon_cmd_nocheck($vmid, "set_password", protocol => 'spice
', password => $spice_ticket);
5597 vm_mon_cmd_nocheck($vmid, "expire_password", protocol => 'spice
', time => "+30");
5602 vm_mon_cmd_nocheck($vmid, "balloon", value => $conf->{balloon}*1024*1024)
5603 if !$statefile && $conf->{balloon};
5605 foreach my $opt (keys %$conf) {
5606 next if $opt !~ m/^net\d+$/;
5607 my $nicconf = parse_net($conf->{$opt});
5608 qemu_set_link_status($vmid, $opt, 0) if $nicconf->{link_down};
5612 vm_mon_cmd_nocheck($vmid, 'qom-set
',
5613 path => "machine/peripheral/balloon0",
5614 property => "guest-stats-polling-interval",
5615 value => 2) if (!defined($conf->{balloon}) || $conf->{balloon});
5617 if ($is_suspended && (my $vmstate = $conf->{vmstate})) {
5618 print "Resumed VM, removing state\n";
5619 delete $conf->@{qw(lock vmstate runningmachine)};
5620 PVE
::Storage
::deactivate_volumes
($storecfg, [$vmstate]);
5621 PVE
::Storage
::vdisk_free
($storecfg, $vmstate);
5622 PVE
::QemuConfig-
>write_config($vmid, $conf);
5625 PVE
::GuestHelpers
::exec_hookscript
($conf, $vmid, 'post-start');
5630 my ($vmid, $execute, %params) = @_;
5632 my $cmd = { execute
=> $execute, arguments
=> \
%params };
5633 vm_qmp_command
($vmid, $cmd);
5636 sub vm_mon_cmd_nocheck
{
5637 my ($vmid, $execute, %params) = @_;
5639 my $cmd = { execute
=> $execute, arguments
=> \
%params };
5640 vm_qmp_command
($vmid, $cmd, 1);
5643 sub vm_qmp_command
{
5644 my ($vmid, $cmd, $nocheck) = @_;
5649 if ($cmd->{arguments
}) {
5650 $timeout = delete $cmd->{arguments
}->{timeout
};
5654 die "VM $vmid not running\n" if !check_running
($vmid, $nocheck);
5655 my $sname = qmp_socket
($vmid);
5656 if (-e
$sname) { # test if VM is reasonambe new and supports qmp/qga
5657 my $qmpclient = PVE
::QMPClient-
>new();
5659 $res = $qmpclient->cmd($vmid, $cmd, $timeout);
5661 die "unable to open monitor socket\n";
5665 syslog
("err", "VM $vmid qmp command failed - $err");
5672 sub vm_human_monitor_command
{
5673 my ($vmid, $cmdline) = @_;
5676 execute
=> 'human-monitor-command',
5677 arguments
=> { 'command-line' => $cmdline},
5680 return vm_qmp_command
($vmid, $cmd);
5683 sub vm_commandline
{
5684 my ($storecfg, $vmid, $snapname) = @_;
5686 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5689 my $snapshot = $conf->{snapshots
}->{$snapname};
5690 die "snapshot '$snapname' does not exist\n" if !defined($snapshot);
5692 $snapshot->{digest
} = $conf->{digest
}; # keep file digest for API
5697 my $defaults = load_defaults
();
5699 my $cmd = config_to_command
($storecfg, $vmid, $conf, $defaults);
5701 return PVE
::Tools
::cmd2string
($cmd);
5705 my ($vmid, $skiplock) = @_;
5707 PVE
::QemuConfig-
>lock_config($vmid, sub {
5709 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5711 PVE
::QemuConfig-
>check_lock($conf) if !$skiplock;
5713 vm_mon_cmd
($vmid, "system_reset");
5717 sub get_vm_volumes
{
5721 foreach_volid
($conf, sub {
5722 my ($volid, $attr) = @_;
5724 return if $volid =~ m
|^/|;
5726 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
5729 push @$vollist, $volid;
5735 sub vm_stop_cleanup
{
5736 my ($storecfg, $vmid, $conf, $keepActive, $apply_pending_changes) = @_;
5741 my $vollist = get_vm_volumes
($conf);
5742 PVE
::Storage
::deactivate_volumes
($storecfg, $vollist);
5745 foreach my $ext (qw(mon qmp pid vnc qga)) {
5746 unlink "/var/run/qemu-server/${vmid}.$ext";
5749 if ($conf->{ivshmem
}) {
5750 my $ivshmem = PVE
::JSONSchema
::parse_property_string
($ivshmem_fmt, $conf->{ivshmem
});
5751 # just delete it for now, VMs which have this already open do not
5752 # are affected, but new VMs will get a separated one. If this
5753 # becomes an issue we either add some sort of ref-counting or just
5754 # add a "don't delete on stop" flag to the ivshmem format.
5755 unlink '/dev/shm/pve-shm-' . ($ivshmem->{name
} // $vmid);
5758 foreach my $key (keys %$conf) {
5759 next if $key !~ m/^hostpci(\d+)$/;
5760 my $hostpciindex = $1;
5761 my $d = parse_hostpci
($conf->{$key});
5762 my $uuid = PVE
::SysFSTools
::generate_mdev_uuid
($vmid, $hostpciindex);
5764 foreach my $pci (@{$d->{pciid
}}) {
5765 my $pciid = $pci->{id
};
5766 PVE
::SysFSTools
::pci_cleanup_mdev_device
($pciid, $uuid);
5770 vmconfig_apply_pending
($vmid, $conf, $storecfg) if $apply_pending_changes;
5772 warn $@ if $@; # avoid errors - just warn
5775 # call only in locked context
5777 my ($storecfg, $vmid, $skiplock, $nocheck, $timeout, $shutdown, $force, $keepActive) = @_;
5779 my $pid = check_running
($vmid, $nocheck);
5784 $conf = PVE
::QemuConfig-
>load_config($vmid);
5785 PVE
::QemuConfig-
>check_lock($conf) if !$skiplock;
5786 if (!defined($timeout) && $shutdown && $conf->{startup
}) {
5787 my $opts = PVE
::JSONSchema
::pve_parse_startup_order
($conf->{startup
});
5788 $timeout = $opts->{down
} if $opts->{down
};
5790 PVE
::GuestHelpers
::exec_hookscript
($conf, $vmid, 'pre-stop');
5795 if (defined($conf) && parse_guest_agent
($conf)->{enabled
}) {
5796 vm_qmp_command
($vmid, {
5797 execute
=> "guest-shutdown",
5798 arguments
=> { timeout
=> $timeout }
5801 vm_qmp_command
($vmid, { execute
=> "system_powerdown" }, $nocheck);
5804 vm_qmp_command
($vmid, { execute
=> "quit" }, $nocheck);
5810 $timeout = 60 if !defined($timeout);
5813 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
5818 if ($count >= $timeout) {
5820 warn "VM still running - terminating now with SIGTERM\n";
5823 die "VM quit/powerdown failed - got timeout\n";
5826 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 1) if $conf;
5831 warn "VM quit/powerdown failed - terminating now with SIGTERM\n";
5834 die "VM quit/powerdown failed\n";
5842 while (($count < $timeout) && check_running
($vmid, $nocheck)) {
5847 if ($count >= $timeout) {
5848 warn "VM still running - terminating now with SIGKILL\n";
5853 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 1) if $conf;
5856 # Note: use $nocheck to skip tests if VM configuration file exists.
5857 # We need that when migration VMs to other nodes (files already moved)
5858 # Note: we set $keepActive in vzdump stop mode - volumes need to stay active
5860 my ($storecfg, $vmid, $skiplock, $nocheck, $timeout, $shutdown, $force, $keepActive, $migratedfrom) = @_;
5862 $force = 1 if !defined($force) && !$shutdown;
5865 my $pid = check_running
($vmid, $nocheck, $migratedfrom);
5866 kill 15, $pid if $pid;
5867 my $conf = PVE
::QemuConfig-
>load_config($vmid, $migratedfrom);
5868 vm_stop_cleanup
($storecfg, $vmid, $conf, $keepActive, 0);
5872 PVE
::QemuConfig-
>lock_config($vmid, sub {
5873 _do_vm_stop
($storecfg, $vmid, $skiplock, $nocheck, $timeout, $shutdown, $force, $keepActive);
5878 my ($vmid, $timeout) = @_;
5880 PVE
::QemuConfig-
>lock_config($vmid, sub {
5882 # only reboot if running, as qmeventd starts it again on a stop event
5883 return if !check_running
($vmid);
5885 create_reboot_request
($vmid);
5887 my $storecfg = PVE
::Storage
::config
();
5888 _do_vm_stop
($storecfg, $vmid, undef, undef, $timeout, 1);
5894 my ($vmid, $skiplock, $includestate, $statestorage) = @_;
5901 PVE
::QemuConfig-
>lock_config($vmid, sub {
5903 $conf = PVE
::QemuConfig-
>load_config($vmid);
5905 my $is_backing_up = PVE
::QemuConfig-
>has_lock($conf, 'backup');
5906 PVE
::QemuConfig-
>check_lock($conf)
5907 if !($skiplock || $is_backing_up);
5909 die "cannot suspend to disk during backup\n"
5910 if $is_backing_up && $includestate;
5912 if ($includestate) {
5913 $conf->{lock} = 'suspending';
5914 my $date = strftime
("%Y-%m-%d", localtime(time()));
5915 $storecfg = PVE
::Storage
::config
();
5916 $vmstate = PVE
::QemuConfig-
>__snapshot_save_vmstate($vmid, $conf, "suspend-$date", $storecfg, $statestorage, 1);
5917 $path = PVE
::Storage
::path
($storecfg, $vmstate);
5918 PVE
::QemuConfig-
>write_config($vmid, $conf);
5920 vm_mon_cmd
($vmid, "stop");
5924 if ($includestate) {
5926 PVE
::Storage
::activate_volumes
($storecfg, [$vmstate]);
5929 vm_mon_cmd
($vmid, "savevm-start", statefile
=> $path);
5931 my $state = vm_mon_cmd_nocheck
($vmid, "query-savevm");
5932 if (!$state->{status
}) {
5933 die "savevm not active\n";
5934 } elsif ($state->{status
} eq 'active') {
5937 } elsif ($state->{status
} eq 'completed') {
5938 print "State saved, quitting\n";
5940 } elsif ($state->{status
} eq 'failed' && $state->{error
}) {
5941 die "query-savevm failed with error '$state->{error}'\n"
5943 die "query-savevm returned status '$state->{status}'\n";
5949 PVE
::QemuConfig-
>lock_config($vmid, sub {
5950 $conf = PVE
::QemuConfig-
>load_config($vmid);
5952 # cleanup, but leave suspending lock, to indicate something went wrong
5954 vm_mon_cmd
($vmid, "savevm-end");
5955 PVE
::Storage
::deactivate_volumes
($storecfg, [$vmstate]);
5956 PVE
::Storage
::vdisk_free
($storecfg, $vmstate);
5957 delete $conf->@{qw(vmstate runningmachine)};
5958 PVE
::QemuConfig-
>write_config($vmid, $conf);
5964 die "lock changed unexpectedly\n"
5965 if !PVE
::QemuConfig-
>has_lock($conf, 'suspending');
5967 vm_qmp_command
($vmid, { execute
=> "quit" });
5968 $conf->{lock} = 'suspended';
5969 PVE
::QemuConfig-
>write_config($vmid, $conf);
5975 my ($vmid, $skiplock, $nocheck) = @_;
5977 PVE
::QemuConfig-
>lock_config($vmid, sub {
5978 my $vm_mon_cmd = $nocheck ? \
&vm_mon_cmd_nocheck
: \
&vm_mon_cmd
;
5979 my $res = $vm_mon_cmd->($vmid, 'query-status');
5980 my $resume_cmd = 'cont';
5982 if ($res->{status
} && $res->{status
} eq 'suspended') {
5983 $resume_cmd = 'system_wakeup';
5988 my $conf = PVE
::QemuConfig-
>load_config($vmid);
5990 PVE
::QemuConfig-
>check_lock($conf)
5991 if !($skiplock || PVE
::QemuConfig-
>has_lock($conf, 'backup'));
5994 $vm_mon_cmd->($vmid, $resume_cmd);
5999 my ($vmid, $skiplock, $key) = @_;
6001 PVE
::QemuConfig-
>lock_config($vmid, sub {
6003 my $conf = PVE
::QemuConfig-
>load_config($vmid);
6005 # there is no qmp command, so we use the human monitor command
6006 my $res = vm_human_monitor_command
($vmid, "sendkey $key");
6007 die $res if $res ne '';
6012 my ($storecfg, $vmid, $skiplock) = @_;
6014 PVE
::QemuConfig-
>lock_config($vmid, sub {
6016 my $conf = PVE
::QemuConfig-
>load_config($vmid);
6018 if (!check_running
($vmid)) {
6019 destroy_vm
($storecfg, $vmid, undef, $skiplock);
6021 die "VM $vmid is running - destroy failed\n";
6026 # vzdump restore implementaion
6028 sub tar_archive_read_firstfile
{
6029 my $archive = shift;
6031 die "ERROR: file '$archive' does not exist\n" if ! -f
$archive;
6033 # try to detect archive type first
6034 my $pid = open (my $fh, '-|', 'tar', 'tf', $archive) ||
6035 die "unable to open file '$archive'\n";
6036 my $firstfile = <$fh>;
6040 die "ERROR: archive contaions no data\n" if !$firstfile;
6046 sub tar_restore_cleanup
{
6047 my ($storecfg, $statfile) = @_;
6049 print STDERR
"starting cleanup\n";
6051 if (my $fd = IO
::File-
>new($statfile, "r")) {
6052 while (defined(my $line = <$fd>)) {
6053 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
6056 if ($volid =~ m
|^/|) {
6057 unlink $volid || die 'unlink failed\n';
6059 PVE
::Storage
::vdisk_free
($storecfg, $volid);
6061 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
6063 print STDERR
"unable to cleanup '$volid' - $@" if $@;
6065 print STDERR
"unable to parse line in statfile - $line";
6072 sub restore_archive
{
6073 my ($archive, $vmid, $user, $opts) = @_;
6075 my $format = $opts->{format
};
6078 if ($archive =~ m/\.tgz$/ || $archive =~ m/\.tar\.gz$/) {
6079 $format = 'tar' if !$format;
6081 } elsif ($archive =~ m/\.tar$/) {
6082 $format = 'tar' if !$format;
6083 } elsif ($archive =~ m/.tar.lzo$/) {
6084 $format = 'tar' if !$format;
6086 } elsif ($archive =~ m/\.vma$/) {
6087 $format = 'vma' if !$format;
6088 } elsif ($archive =~ m/\.vma\.gz$/) {
6089 $format = 'vma' if !$format;
6091 } elsif ($archive =~ m/\.vma\.lzo$/) {
6092 $format = 'vma' if !$format;
6095 $format = 'vma' if !$format; # default
6098 # try to detect archive format
6099 if ($format eq 'tar') {
6100 return restore_tar_archive
($archive, $vmid, $user, $opts);
6102 return restore_vma_archive
($archive, $vmid, $user, $opts, $comp);
6106 sub restore_update_config_line
{
6107 my ($outfd, $cookie, $vmid, $map, $line, $unique) = @_;
6109 return if $line =~ m/^\#qmdump\#/;
6110 return if $line =~ m/^\#vzdump\#/;
6111 return if $line =~ m/^lock:/;
6112 return if $line =~ m/^unused\d+:/;
6113 return if $line =~ m/^parent:/;
6115 my $dc = PVE
::Cluster
::cfs_read_file
('datacenter.cfg');
6116 if (($line =~ m/^(vlan(\d+)):\s*(\S+)\s*$/)) {
6117 # try to convert old 1.X settings
6118 my ($id, $ind, $ethcfg) = ($1, $2, $3);
6119 foreach my $devconfig (PVE
::Tools
::split_list
($ethcfg)) {
6120 my ($model, $macaddr) = split(/\=/, $devconfig);
6121 $macaddr = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
}) if !$macaddr || $unique;
6124 bridge
=> "vmbr$ind",
6125 macaddr
=> $macaddr,
6127 my $netstr = print_net
($net);
6129 print $outfd "net$cookie->{netcount}: $netstr\n";
6130 $cookie->{netcount
}++;
6132 } elsif (($line =~ m/^(net\d+):\s*(\S+)\s*$/) && $unique) {
6133 my ($id, $netstr) = ($1, $2);
6134 my $net = parse_net
($netstr);
6135 $net->{macaddr
} = PVE
::Tools
::random_ether_addr
($dc->{mac_prefix
}) if $net->{macaddr
};
6136 $netstr = print_net
($net);
6137 print $outfd "$id: $netstr\n";
6138 } elsif ($line =~ m/^((ide|scsi|virtio|sata|efidisk)\d+):\s*(\S+)\s*$/) {
6141 my $di = parse_drive
($virtdev, $value);
6142 if (defined($di->{backup
}) && !$di->{backup
}) {
6143 print $outfd "#$line";
6144 } elsif ($map->{$virtdev}) {
6145 delete $di->{format
}; # format can change on restore
6146 $di->{file
} = $map->{$virtdev};
6147 $value = print_drive
($vmid, $di);
6148 print $outfd "$virtdev: $value\n";
6152 } elsif (($line =~ m/^vmgenid: (.*)/)) {
6154 if ($vmgenid ne '0') {
6155 # always generate a new vmgenid if there was a valid one setup
6156 $vmgenid = generate_uuid
();
6158 print $outfd "vmgenid: $vmgenid\n";
6159 } elsif (($line =~ m/^(smbios1: )(.*)/) && $unique) {
6160 my ($uuid, $uuid_str);
6161 UUID
::generate
($uuid);
6162 UUID
::unparse
($uuid, $uuid_str);
6163 my $smbios1 = parse_smbios1
($2);
6164 $smbios1->{uuid
} = $uuid_str;
6165 print $outfd $1.print_smbios1
($smbios1)."\n";
6172 my ($cfg, $vmid) = @_;
6174 my $info = PVE
::Storage
::vdisk_list
($cfg, undef, $vmid);
6176 my $volid_hash = {};
6177 foreach my $storeid (keys %$info) {
6178 foreach my $item (@{$info->{$storeid}}) {
6179 next if !($item->{volid
} && $item->{size
});
6180 $item->{path
} = PVE
::Storage
::path
($cfg, $item->{volid
});
6181 $volid_hash->{$item->{volid
}} = $item;
6188 sub is_volume_in_use
{
6189 my ($storecfg, $conf, $skip_drive, $volid) = @_;
6191 my $path = PVE
::Storage
::path
($storecfg, $volid);
6193 my $scan_config = sub {
6194 my ($cref, $snapname) = @_;
6196 foreach my $key (keys %$cref) {
6197 my $value = $cref->{$key};
6198 if (is_valid_drivename
($key)) {
6199 next if $skip_drive && $key eq $skip_drive;
6200 my $drive = parse_drive
($key, $value);
6201 next if !$drive || !$drive->{file
} || drive_is_cdrom
($drive);
6202 return 1 if $volid eq $drive->{file
};
6203 if ($drive->{file
} =~ m!^/!) {
6204 return 1 if $drive->{file
} eq $path;
6206 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
}, 1);
6208 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid, 1);
6210 return 1 if $path eq PVE
::Storage
::path
($storecfg, $drive->{file
}, $snapname);
6218 return 1 if &$scan_config($conf);
6222 foreach my $snapname (keys %{$conf->{snapshots
}}) {
6223 return 1 if &$scan_config($conf->{snapshots
}->{$snapname}, $snapname);
6229 sub update_disksize
{
6230 my ($vmid, $conf, $volid_hash) = @_;
6233 my $prefix = "VM $vmid:";
6235 # used and unused disks
6236 my $referenced = {};
6238 # Note: it is allowed to define multiple storages with same path (alias), so
6239 # we need to check both 'volid' and real 'path' (two different volid can point
6240 # to the same path).
6242 my $referencedpath = {};
6245 foreach my $opt (keys %$conf) {
6246 if (is_valid_drivename
($opt)) {
6247 my $drive = parse_drive
($opt, $conf->{$opt});
6248 my $volid = $drive->{file
};
6251 $referenced->{$volid} = 1;
6252 if ($volid_hash->{$volid} &&
6253 (my $path = $volid_hash->{$volid}->{path
})) {
6254 $referencedpath->{$path} = 1;
6257 next if drive_is_cdrom
($drive);
6258 next if !$volid_hash->{$volid};
6260 $drive->{size
} = $volid_hash->{$volid}->{size
};
6261 my $new = print_drive
($vmid, $drive);
6262 if ($new ne $conf->{$opt}) {
6264 $conf->{$opt} = $new;
6265 print "$prefix update disk '$opt' information.\n";
6270 # remove 'unusedX' entry if volume is used
6271 foreach my $opt (keys %$conf) {
6272 next if $opt !~ m/^unused\d+$/;
6273 my $volid = $conf->{$opt};
6274 my $path = $volid_hash->{$volid}->{path
} if $volid_hash->{$volid};
6275 if ($referenced->{$volid} || ($path && $referencedpath->{$path})) {
6276 print "$prefix remove entry '$opt', its volume '$volid' is in use.\n";
6278 delete $conf->{$opt};
6281 $referenced->{$volid} = 1;
6282 $referencedpath->{$path} = 1 if $path;
6285 foreach my $volid (sort keys %$volid_hash) {
6286 next if $volid =~ m/vm-$vmid-state-/;
6287 next if $referenced->{$volid};
6288 my $path = $volid_hash->{$volid}->{path
};
6289 next if !$path; # just to be sure
6290 next if $referencedpath->{$path};
6292 my $key = PVE
::QemuConfig-
>add_unused_volume($conf, $volid);
6293 print "$prefix add unreferenced volume '$volid' as '$key' to config.\n";
6294 $referencedpath->{$path} = 1; # avoid to add more than once (aliases)
6301 my ($vmid, $nolock, $dryrun) = @_;
6303 my $cfg = PVE
::Storage
::config
();
6305 # FIXME: Remove once our RBD plugin can handle CT and VM on a single storage
6306 # see: https://pve.proxmox.com/pipermail/pve-devel/2018-July/032900.html
6307 foreach my $stor (keys %{$cfg->{ids
}}) {
6308 delete($cfg->{ids
}->{$stor}) if ! $cfg->{ids
}->{$stor}->{content
}->{images
};
6311 print "rescan volumes...\n";
6312 my $volid_hash = scan_volids
($cfg, $vmid);
6314 my $updatefn = sub {
6317 my $conf = PVE
::QemuConfig-
>load_config($vmid);
6319 PVE
::QemuConfig-
>check_lock($conf);
6322 foreach my $volid (keys %$volid_hash) {
6323 my $info = $volid_hash->{$volid};
6324 $vm_volids->{$volid} = $info if $info->{vmid
} && $info->{vmid
} == $vmid;
6327 my $changes = update_disksize
($vmid, $conf, $vm_volids);
6329 PVE
::QemuConfig-
>write_config($vmid, $conf) if $changes && !$dryrun;
6332 if (defined($vmid)) {
6336 PVE
::QemuConfig-
>lock_config($vmid, $updatefn, $vmid);
6339 my $vmlist = config_list
();
6340 foreach my $vmid (keys %$vmlist) {
6344 PVE
::QemuConfig-
>lock_config($vmid, $updatefn, $vmid);
6350 sub restore_vma_archive
{
6351 my ($archive, $vmid, $user, $opts, $comp) = @_;
6353 my $readfrom = $archive;
6355 my $cfg = PVE
::Storage
::config
();
6357 my $bwlimit = $opts->{bwlimit
};
6359 my $dbg_cmdstring = '';
6360 my $add_pipe = sub {
6362 push @$commands, $cmd;
6363 $dbg_cmdstring .= ' | ' if length($dbg_cmdstring);
6364 $dbg_cmdstring .= PVE
::Tools
::cmd2string
($cmd);
6369 if ($archive eq '-') {
6372 # If we use a backup from a PVE defined storage we also consider that
6373 # storage's rate limit:
6374 my (undef, $volid) = PVE
::Storage
::path_to_volume_id
($cfg, $archive);
6375 if (defined($volid)) {
6376 my ($sid, undef) = PVE
::Storage
::parse_volume_id
($volid);
6377 my $readlimit = PVE
::Storage
::get_bandwidth_limit
('restore', [$sid], $bwlimit);
6379 print STDERR
"applying read rate limit: $readlimit\n";
6380 my $cstream = ['cstream', '-t', $readlimit*1024, '--', $readfrom];
6381 $add_pipe->($cstream);
6388 if ($comp eq 'gzip') {
6389 $cmd = ['zcat', $readfrom];
6390 } elsif ($comp eq 'lzop') {
6391 $cmd = ['lzop', '-d', '-c', $readfrom];
6393 die "unknown compression method '$comp'\n";
6398 my $tmpdir = "/var/tmp/vzdumptmp$$";
6401 # disable interrupts (always do cleanups)
6405 local $SIG{HUP
} = sub { warn "got interrupt - ignored\n"; };
6407 my $mapfifo = "/var/tmp/vzdumptmp$$.fifo";
6408 POSIX
::mkfifo
($mapfifo, 0600);
6411 my $openfifo = sub {
6412 open($fifofh, '>', $mapfifo) || die $!;
6415 $add_pipe->(['vma', 'extract', '-v', '-r', $mapfifo, $readfrom, $tmpdir]);
6422 my $rpcenv = PVE
::RPCEnvironment
::get
();
6424 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
6425 my $tmpfn = "$conffile.$$.tmp";
6427 # Note: $oldconf is undef if VM does not exists
6428 my $cfs_path = PVE
::QemuConfig-
>cfs_config_path($vmid);
6429 my $oldconf = PVE
::Cluster
::cfs_read_file
($cfs_path);
6433 my $print_devmap = sub {
6434 my $virtdev_hash = {};
6436 my $cfgfn = "$tmpdir/qemu-server.conf";
6438 # we can read the config - that is already extracted
6439 my $fh = IO
::File-
>new($cfgfn, "r") ||
6440 "unable to read qemu-server.conf - $!\n";
6442 my $fwcfgfn = "$tmpdir/qemu-server.fw";
6444 my $pve_firewall_dir = '/etc/pve/firewall';
6445 mkdir $pve_firewall_dir; # make sure the dir exists
6446 PVE
::Tools
::file_copy
($fwcfgfn, "${pve_firewall_dir}/$vmid.fw");
6449 while (defined(my $line = <$fh>)) {
6450 if ($line =~ m/^\#qmdump\#map:(\S+):(\S+):(\S*):(\S*):$/) {
6451 my ($virtdev, $devname, $storeid, $format) = ($1, $2, $3, $4);
6452 die "archive does not contain data for drive '$virtdev'\n"
6453 if !$devinfo->{$devname};
6454 if (defined($opts->{storage
})) {
6455 $storeid = $opts->{storage
} || 'local';
6456 } elsif (!$storeid) {
6459 $format = 'raw' if !$format;
6460 $devinfo->{$devname}->{devname
} = $devname;
6461 $devinfo->{$devname}->{virtdev
} = $virtdev;
6462 $devinfo->{$devname}->{format
} = $format;
6463 $devinfo->{$devname}->{storeid
} = $storeid;
6465 # check permission on storage
6466 my $pool = $opts->{pool
}; # todo: do we need that?
6467 if ($user ne 'root@pam') {
6468 $rpcenv->check($user, "/storage/$storeid", ['Datastore.AllocateSpace']);
6471 $storage_limits{$storeid} = $bwlimit;
6473 $virtdev_hash->{$virtdev} = $devinfo->{$devname};
6474 } elsif ($line =~ m/^((?:ide|sata|scsi)\d+):\s*(.*)\s*$/) {
6476 my $drive = parse_drive
($virtdev, $2);
6477 if (drive_is_cloudinit
($drive)) {
6478 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
});
6479 my $scfg = PVE
::Storage
::storage_config
($cfg, $storeid);
6480 my $format = qemu_img_format
($scfg, $volname); # has 'raw' fallback
6484 storeid
=> $opts->{storage
} // $storeid,
6485 size
=> PVE
::QemuServer
::Cloudinit
::CLOUDINIT_DISK_SIZE
,
6486 file
=> $drive->{file
}, # to make drive_is_cloudinit check possible
6487 name
=> "vm-$vmid-cloudinit",
6490 $virtdev_hash->{$virtdev} = $d;
6495 foreach my $key (keys %storage_limits) {
6496 my $limit = PVE
::Storage
::get_bandwidth_limit
('restore', [$key], $bwlimit);
6498 print STDERR
"rate limit for storage $key: $limit KiB/s\n";
6499 $storage_limits{$key} = $limit * 1024;
6502 foreach my $devname (keys %$devinfo) {
6503 die "found no device mapping information for device '$devname'\n"
6504 if !$devinfo->{$devname}->{virtdev
};
6507 # create empty/temp config
6509 PVE
::Tools
::file_set_contents
($conffile, "memory: 128\n");
6510 foreach_drive
($oldconf, sub {
6511 my ($ds, $drive) = @_;
6513 return if drive_is_cdrom
($drive, 1);
6515 my $volid = $drive->{file
};
6516 return if !$volid || $volid =~ m
|^/|;
6518 my ($path, $owner) = PVE
::Storage
::path
($cfg, $volid);
6519 return if !$path || !$owner || ($owner != $vmid);
6521 # Note: only delete disk we want to restore
6522 # other volumes will become unused
6523 if ($virtdev_hash->{$ds}) {
6524 eval { PVE
::Storage
::vdisk_free
($cfg, $volid); };
6531 # delete vmstate files, after the restore we have no snapshots anymore
6532 foreach my $snapname (keys %{$oldconf->{snapshots
}}) {
6533 my $snap = $oldconf->{snapshots
}->{$snapname};
6534 if ($snap->{vmstate
}) {
6535 eval { PVE
::Storage
::vdisk_free
($cfg, $snap->{vmstate
}); };
6544 foreach my $virtdev (sort keys %$virtdev_hash) {
6545 my $d = $virtdev_hash->{$virtdev};
6546 my $alloc_size = int(($d->{size
} + 1024 - 1)/1024);
6547 my $storeid = $d->{storeid
};
6548 my $scfg = PVE
::Storage
::storage_config
($cfg, $storeid);
6551 if (my $limit = $storage_limits{$storeid}) {
6552 $map_opts .= "throttling.bps=$limit:throttling.group=$storeid:";
6555 # test if requested format is supported
6556 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($cfg, $storeid);
6557 my $supported = grep { $_ eq $d->{format
} } @$validFormats;
6558 $d->{format
} = $defFormat if !$supported;
6561 if ($d->{is_cloudinit
}) {
6563 $name .= ".$d->{format}" if $d->{format
} ne 'raw';
6566 my $volid = PVE
::Storage
::vdisk_alloc
($cfg, $storeid, $vmid, $d->{format
}, $name, $alloc_size);
6567 print STDERR
"new volume ID is '$volid'\n";
6568 $d->{volid
} = $volid;
6570 PVE
::Storage
::activate_volumes
($cfg, [$volid]);
6572 my $write_zeros = 1;
6573 if (PVE
::Storage
::volume_has_feature
($cfg, 'sparseinit', $volid)) {
6577 if (!$d->{is_cloudinit
}) {
6578 my $path = PVE
::Storage
::path
($cfg, $volid);
6580 print $fifofh "${map_opts}format=$d->{format}:${write_zeros}:$d->{devname}=$path\n";
6582 print "map '$d->{devname}' to '$path' (write zeros = ${write_zeros})\n";
6584 $map->{$virtdev} = $volid;
6587 $fh->seek(0, 0) || die "seek failed - $!\n";
6589 my $outfd = new IO
::File
($tmpfn, "w") ||
6590 die "unable to write config for VM $vmid\n";
6592 my $cookie = { netcount
=> 0 };
6593 while (defined(my $line = <$fh>)) {
6594 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
6607 local $SIG{PIPE
} = sub { die "interrupted by signal\n"; };
6608 local $SIG{ALRM
} = sub { die "got timeout\n"; };
6610 $oldtimeout = alarm($timeout);
6617 if ($line =~ m/^DEV:\sdev_id=(\d+)\ssize:\s(\d+)\sdevname:\s(\S+)$/) {
6618 my ($dev_id, $size, $devname) = ($1, $2, $3);
6619 $devinfo->{$devname} = { size
=> $size, dev_id
=> $dev_id };
6620 } elsif ($line =~ m/^CTIME: /) {
6621 # we correctly received the vma config, so we can disable
6622 # the timeout now for disk allocation (set to 10 minutes, so
6623 # that we always timeout if something goes wrong)
6626 print $fifofh "done\n";
6627 my $tmp = $oldtimeout || 0;
6628 $oldtimeout = undef;
6634 print "restore vma archive: $dbg_cmdstring\n";
6635 run_command
($commands, input
=> $input, outfunc
=> $parser, afterfork
=> $openfifo);
6639 alarm($oldtimeout) if $oldtimeout;
6642 foreach my $devname (keys %$devinfo) {
6643 my $volid = $devinfo->{$devname}->{volid
};
6644 push @$vollist, $volid if $volid;
6647 PVE
::Storage
::deactivate_volumes
($cfg, $vollist);
6655 foreach my $devname (keys %$devinfo) {
6656 my $volid = $devinfo->{$devname}->{volid
};
6659 if ($volid =~ m
|^/|) {
6660 unlink $volid || die 'unlink failed\n';
6662 PVE
::Storage
::vdisk_free
($cfg, $volid);
6664 print STDERR
"temporary volume '$volid' sucessfuly removed\n";
6666 print STDERR
"unable to cleanup '$volid' - $@" if $@;
6673 rename($tmpfn, $conffile) ||
6674 die "unable to commit configuration file '$conffile'\n";
6676 PVE
::Cluster
::cfs_update
(); # make sure we read new file
6678 eval { rescan
($vmid, 1); };
6682 sub restore_tar_archive
{
6683 my ($archive, $vmid, $user, $opts) = @_;
6685 if ($archive ne '-') {
6686 my $firstfile = tar_archive_read_firstfile
($archive);
6687 die "ERROR: file '$archive' dos not lock like a QemuServer vzdump backup\n"
6688 if $firstfile ne 'qemu-server.conf';
6691 my $storecfg = PVE
::Storage
::config
();
6693 # destroy existing data - keep empty config
6694 my $vmcfgfn = PVE
::QemuConfig-
>config_file($vmid);
6695 destroy_vm
($storecfg, $vmid, 1) if -f
$vmcfgfn;
6697 my $tocmd = "/usr/lib/qemu-server/qmextract";
6699 $tocmd .= " --storage " . PVE
::Tools
::shellquote
($opts->{storage
}) if $opts->{storage
};
6700 $tocmd .= " --pool " . PVE
::Tools
::shellquote
($opts->{pool
}) if $opts->{pool
};
6701 $tocmd .= ' --prealloc' if $opts->{prealloc
};
6702 $tocmd .= ' --info' if $opts->{info
};
6704 # tar option "xf" does not autodetect compression when read from STDIN,
6705 # so we pipe to zcat
6706 my $cmd = "zcat -f|tar xf " . PVE
::Tools
::shellquote
($archive) . " " .
6707 PVE
::Tools
::shellquote
("--to-command=$tocmd");
6709 my $tmpdir = "/var/tmp/vzdumptmp$$";
6712 local $ENV{VZDUMP_TMPDIR
} = $tmpdir;
6713 local $ENV{VZDUMP_VMID
} = $vmid;
6714 local $ENV{VZDUMP_USER
} = $user;
6716 my $conffile = PVE
::QemuConfig-
>config_file($vmid);
6717 my $tmpfn = "$conffile.$$.tmp";
6719 # disable interrupts (always do cleanups)
6723 local $SIG{HUP
} = sub { print STDERR
"got interrupt - ignored\n"; };
6731 local $SIG{PIPE
} = sub { die "interrupted by signal\n"; };
6733 if ($archive eq '-') {
6734 print "extracting archive from STDIN\n";
6735 run_command
($cmd, input
=> "<&STDIN");
6737 print "extracting archive '$archive'\n";
6741 return if $opts->{info
};
6745 my $statfile = "$tmpdir/qmrestore.stat";
6746 if (my $fd = IO
::File-
>new($statfile, "r")) {
6747 while (defined (my $line = <$fd>)) {
6748 if ($line =~ m/vzdump:([^\s:]*):(\S+)$/) {
6749 $map->{$1} = $2 if $1;
6751 print STDERR
"unable to parse line in statfile - $line\n";
6757 my $confsrc = "$tmpdir/qemu-server.conf";
6759 my $srcfd = new IO
::File
($confsrc, "r") ||
6760 die "unable to open file '$confsrc'\n";
6762 my $outfd = new IO
::File
($tmpfn, "w") ||
6763 die "unable to write config for VM $vmid\n";
6765 my $cookie = { netcount
=> 0 };
6766 while (defined (my $line = <$srcfd>)) {
6767 restore_update_config_line
($outfd, $cookie, $vmid, $map, $line, $opts->{unique
});
6779 tar_restore_cleanup
($storecfg, "$tmpdir/qmrestore.stat") if !$opts->{info
};
6786 rename $tmpfn, $conffile ||
6787 die "unable to commit configuration file '$conffile'\n";
6789 PVE
::Cluster
::cfs_update
(); # make sure we read new file
6791 eval { rescan
($vmid, 1); };
6795 sub foreach_storage_used_by_vm
{
6796 my ($conf, $func) = @_;
6800 foreach_drive
($conf, sub {
6801 my ($ds, $drive) = @_;
6802 return if drive_is_cdrom
($drive);
6804 my $volid = $drive->{file
};
6806 my ($sid, $volname) = PVE
::Storage
::parse_volume_id
($volid, 1);
6807 $sidhash->{$sid} = $sid if $sid;
6810 foreach my $sid (sort keys %$sidhash) {
6815 sub do_snapshots_with_qemu
{
6816 my ($storecfg, $volid) = @_;
6818 my $storage_name = PVE
::Storage
::parse_volume_id
($volid);
6819 my $scfg = $storecfg->{ids
}->{$storage_name};
6821 if ($qemu_snap_storage->{$scfg->{type
}} && !$scfg->{krbd
}){
6825 if ($volid =~ m/\.(qcow2|qed)$/){
6832 sub qga_check_running
{
6833 my ($vmid, $nowarn) = @_;
6835 eval { vm_mon_cmd
($vmid, "guest-ping", timeout
=> 3); };
6837 warn "Qemu Guest Agent is not running - $@" if !$nowarn;
6843 sub template_create
{
6844 my ($vmid, $conf, $disk) = @_;
6846 my $storecfg = PVE
::Storage
::config
();
6848 foreach_drive
($conf, sub {
6849 my ($ds, $drive) = @_;
6851 return if drive_is_cdrom
($drive);
6852 return if $disk && $ds ne $disk;
6854 my $volid = $drive->{file
};
6855 return if !PVE
::Storage
::volume_has_feature
($storecfg, 'template', $volid);
6857 my $voliddst = PVE
::Storage
::vdisk_create_base
($storecfg, $volid);
6858 $drive->{file
} = $voliddst;
6859 $conf->{$ds} = print_drive
($vmid, $drive);
6860 PVE
::QemuConfig-
>write_config($vmid, $conf);
6864 sub convert_iscsi_path
{
6867 if ($path =~ m
|^iscsi
://([^/]+)/([^/]+)/(.+)$|) {
6872 my $initiator_name = get_initiator_name
();
6874 return "file.driver=iscsi,file.transport=tcp,file.initiator-name=$initiator_name,".
6875 "file.portal=$portal,file.target=$target,file.lun=$lun,driver=raw";
6878 die "cannot convert iscsi path '$path', unkown format\n";
6881 sub qemu_img_convert
{
6882 my ($src_volid, $dst_volid, $size, $snapname, $is_zero_initialized) = @_;
6884 my $storecfg = PVE
::Storage
::config
();
6885 my ($src_storeid, $src_volname) = PVE
::Storage
::parse_volume_id
($src_volid, 1);
6886 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid, 1);
6888 if ($src_storeid && $dst_storeid) {
6890 PVE
::Storage
::activate_volumes
($storecfg, [$src_volid], $snapname);
6892 my $src_scfg = PVE
::Storage
::storage_config
($storecfg, $src_storeid);
6893 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
6895 my $src_format = qemu_img_format
($src_scfg, $src_volname);
6896 my $dst_format = qemu_img_format
($dst_scfg, $dst_volname);
6898 my $src_path = PVE
::Storage
::path
($storecfg, $src_volid, $snapname);
6899 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
6901 my $src_is_iscsi = ($src_path =~ m
|^iscsi
://|);
6902 my $dst_is_iscsi = ($dst_path =~ m
|^iscsi
://|);
6905 push @$cmd, '/usr/bin/qemu-img', 'convert', '-p', '-n';
6906 push @$cmd, '-l', "snapshot.name=$snapname" if($snapname && $src_format eq "qcow2");
6907 push @$cmd, '-t', 'none' if $dst_scfg->{type
} eq 'zfspool';
6908 push @$cmd, '-T', 'none' if $src_scfg->{type
} eq 'zfspool';
6910 if ($src_is_iscsi) {
6911 push @$cmd, '--image-opts';
6912 $src_path = convert_iscsi_path
($src_path);
6914 push @$cmd, '-f', $src_format;
6917 if ($dst_is_iscsi) {
6918 push @$cmd, '--target-image-opts';
6919 $dst_path = convert_iscsi_path
($dst_path);
6921 push @$cmd, '-O', $dst_format;
6924 push @$cmd, $src_path;
6926 if (!$dst_is_iscsi && $is_zero_initialized) {
6927 push @$cmd, "zeroinit:$dst_path";
6929 push @$cmd, $dst_path;
6934 if($line =~ m/\((\S+)\/100\
%\)/){
6936 my $transferred = int($size * $percent / 100);
6937 my $remaining = $size - $transferred;
6939 print "transferred: $transferred bytes remaining: $remaining bytes total: $size bytes progression: $percent %\n";
6944 eval { run_command
($cmd, timeout
=> undef, outfunc
=> $parser); };
6946 die "copy failed: $err" if $err;
6950 sub qemu_img_format
{
6951 my ($scfg, $volname) = @_;
6953 if ($scfg->{path
} && $volname =~ m/\.($QEMU_FORMAT_RE)$/) {
6960 sub qemu_drive_mirror
{
6961 my ($vmid, $drive, $dst_volid, $vmiddst, $is_zero_initialized, $jobs, $skipcomplete, $qga, $bwlimit) = @_;
6963 $jobs = {} if !$jobs;
6967 $jobs->{"drive-$drive"} = {};
6969 if ($dst_volid =~ /^nbd:/) {
6970 $qemu_target = $dst_volid;
6973 my $storecfg = PVE
::Storage
::config
();
6974 my ($dst_storeid, $dst_volname) = PVE
::Storage
::parse_volume_id
($dst_volid);
6976 my $dst_scfg = PVE
::Storage
::storage_config
($storecfg, $dst_storeid);
6978 $format = qemu_img_format
($dst_scfg, $dst_volname);
6980 my $dst_path = PVE
::Storage
::path
($storecfg, $dst_volid);
6982 $qemu_target = $is_zero_initialized ?
"zeroinit:$dst_path" : $dst_path;
6985 my $opts = { timeout
=> 10, device
=> "drive-$drive", mode
=> "existing", sync
=> "full", target
=> $qemu_target };
6986 $opts->{format
} = $format if $format;
6988 if (defined($bwlimit)) {
6989 $opts->{speed
} = $bwlimit * 1024;
6990 print "drive mirror is starting for drive-$drive with bandwidth limit: ${bwlimit} KB/s\n";
6992 print "drive mirror is starting for drive-$drive\n";
6995 # if a job already runs for this device we get an error, catch it for cleanup
6996 eval { vm_mon_cmd
($vmid, "drive-mirror", %$opts); };
6998 eval { PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs) };
7000 die "mirroring error: $err\n";
7003 qemu_drive_mirror_monitor
($vmid, $vmiddst, $jobs, $skipcomplete, $qga);
7006 sub qemu_drive_mirror_monitor
{
7007 my ($vmid, $vmiddst, $jobs, $skipcomplete, $qga) = @_;
7010 my $err_complete = 0;
7013 die "storage migration timed out\n" if $err_complete > 300;
7015 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
7017 my $running_mirror_jobs = {};
7018 foreach my $stat (@$stats) {
7019 next if $stat->{type
} ne 'mirror';
7020 $running_mirror_jobs->{$stat->{device
}} = $stat;
7023 my $readycounter = 0;
7025 foreach my $job (keys %$jobs) {
7027 if(defined($jobs->{$job}->{complete
}) && !defined($running_mirror_jobs->{$job})) {
7028 print "$job : finished\n";
7029 delete $jobs->{$job};
7033 die "$job: mirroring has been cancelled\n" if !defined($running_mirror_jobs->{$job});
7035 my $busy = $running_mirror_jobs->{$job}->{busy
};
7036 my $ready = $running_mirror_jobs->{$job}->{ready
};
7037 if (my $total = $running_mirror_jobs->{$job}->{len
}) {
7038 my $transferred = $running_mirror_jobs->{$job}->{offset
} || 0;
7039 my $remaining = $total - $transferred;
7040 my $percent = sprintf "%.2f", ($transferred * 100 / $total);
7042 print "$job: transferred: $transferred bytes remaining: $remaining bytes total: $total bytes progression: $percent % busy: $busy ready: $ready \n";
7045 $readycounter++ if $running_mirror_jobs->{$job}->{ready
};
7048 last if scalar(keys %$jobs) == 0;
7050 if ($readycounter == scalar(keys %$jobs)) {
7051 print "all mirroring jobs are ready \n";
7052 last if $skipcomplete; #do the complete later
7054 if ($vmiddst && $vmiddst != $vmid) {
7055 my $agent_running = $qga && qga_check_running
($vmid);
7056 if ($agent_running) {
7057 print "freeze filesystem\n";
7058 eval { PVE
::QemuServer
::vm_mon_cmd
($vmid, "guest-fsfreeze-freeze"); };
7060 print "suspend vm\n";
7061 eval { PVE
::QemuServer
::vm_suspend
($vmid, 1); };
7064 # if we clone a disk for a new target vm, we don't switch the disk
7065 PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs);
7067 if ($agent_running) {
7068 print "unfreeze filesystem\n";
7069 eval { PVE
::QemuServer
::vm_mon_cmd
($vmid, "guest-fsfreeze-thaw"); };
7071 print "resume vm\n";
7072 eval { PVE
::QemuServer
::vm_resume
($vmid, 1, 1); };
7078 foreach my $job (keys %$jobs) {
7079 # try to switch the disk if source and destination are on the same guest
7080 print "$job: Completing block job...\n";
7082 eval { vm_mon_cmd
($vmid, "block-job-complete", device
=> $job) };
7083 if ($@ =~ m/cannot be completed/) {
7084 print "$job: Block job cannot be completed, try again.\n";
7087 print "$job: Completed successfully.\n";
7088 $jobs->{$job}->{complete
} = 1;
7099 eval { PVE
::QemuServer
::qemu_blockjobs_cancel
($vmid, $jobs) };
7100 die "mirroring error: $err";
7105 sub qemu_blockjobs_cancel
{
7106 my ($vmid, $jobs) = @_;
7108 foreach my $job (keys %$jobs) {
7109 print "$job: Cancelling block job\n";
7110 eval { vm_mon_cmd
($vmid, "block-job-cancel", device
=> $job); };
7111 $jobs->{$job}->{cancel
} = 1;
7115 my $stats = vm_mon_cmd
($vmid, "query-block-jobs");
7117 my $running_jobs = {};
7118 foreach my $stat (@$stats) {
7119 $running_jobs->{$stat->{device
}} = $stat;
7122 foreach my $job (keys %$jobs) {
7124 if (defined($jobs->{$job}->{cancel
}) && !defined($running_jobs->{$job})) {
7125 print "$job: Done.\n";
7126 delete $jobs->{$job};
7130 last if scalar(keys %$jobs) == 0;
7137 my ($storecfg, $vmid, $running, $drivename, $drive, $snapname,
7138 $newvmid, $storage, $format, $full, $newvollist, $jobs, $skipcomplete, $qga, $bwlimit) = @_;
7143 print "create linked clone of drive $drivename ($drive->{file})\n";
7144 $newvolid = PVE
::Storage
::vdisk_clone
($storecfg, $drive->{file
}, $newvmid, $snapname);
7145 push @$newvollist, $newvolid;
7148 my ($storeid, $volname) = PVE
::Storage
::parse_volume_id
($drive->{file
});
7149 $storeid = $storage if $storage;
7151 my $dst_format = resolve_dst_disk_format
($storecfg, $storeid, $volname, $format);
7152 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $drive->{file
}, 3);
7154 print "create full clone of drive $drivename ($drive->{file})\n";
7156 $newvolid = PVE
::Storage
::vdisk_alloc
($storecfg, $storeid, $newvmid, $dst_format, $name, ($size/1024));
7157 push @$newvollist, $newvolid;
7159 PVE
::Storage
::activate_volumes
($storecfg, [$newvolid]);
7161 my $sparseinit = PVE
::Storage
::volume_has_feature
($storecfg, 'sparseinit', $newvolid);
7162 if (!$running || $snapname) {
7163 # TODO: handle bwlimits
7164 qemu_img_convert
($drive->{file
}, $newvolid, $size, $snapname, $sparseinit);
7167 my $kvmver = get_running_qemu_version
($vmid);
7168 if (!qemu_machine_feature_enabled
(undef, $kvmver, 2, 7)) {
7169 die "drive-mirror with iothread requires qemu version 2.7 or higher\n"
7170 if $drive->{iothread
};
7173 qemu_drive_mirror
($vmid, $drivename, $newvolid, $newvmid, $sparseinit, $jobs, $skipcomplete, $qga, $bwlimit);
7177 my ($size) = PVE
::Storage
::volume_size_info
($storecfg, $newvolid, 3);
7180 $disk->{format
} = undef;
7181 $disk->{file
} = $newvolid;
7182 $disk->{size
} = $size;
7187 # this only works if VM is running
7188 sub get_current_qemu_machine
{
7191 my $cmd = { execute
=> 'query-machines', arguments
=> {} };
7192 my $res = vm_qmp_command
($vmid, $cmd);
7194 my ($current, $default);
7195 foreach my $e (@$res) {
7196 $default = $e->{name
} if $e->{'is-default'};
7197 $current = $e->{name
} if $e->{'is-current'};
7200 # fallback to the default machine if current is not supported by qemu
7201 return $current || $default || 'pc';
7204 sub get_running_qemu_version
{
7206 my $cmd = { execute
=> 'query-version', arguments
=> {} };
7207 my $res = vm_qmp_command
($vmid, $cmd);
7208 return "$res->{qemu}->{major}.$res->{qemu}->{minor}";
7211 sub qemu_machine_feature_enabled
{
7212 my ($machine, $kvmver, $version_major, $version_minor) = @_;
7217 if ($machine && $machine =~ m/^((?:pc(-i440fx|-q35)?|virt)-(\d+)\.(\d+))/) {
7219 $current_major = $3;
7220 $current_minor = $4;
7222 } elsif ($kvmver =~ m/^(\d+)\.(\d+)/) {
7224 $current_major = $1;
7225 $current_minor = $2;
7228 return 1 if $current_major > $version_major ||
7229 ($current_major == $version_major &&
7230 $current_minor >= $version_minor);
7233 sub qemu_machine_pxe
{
7234 my ($vmid, $conf) = @_;
7236 my $machine = PVE
::QemuServer
::get_current_qemu_machine
($vmid);
7238 if ($conf->{machine
} && $conf->{machine
} =~ m/\.pxe$/) {
7245 sub qemu_use_old_bios_files
{
7246 my ($machine_type) = @_;
7248 return if !$machine_type;
7250 my $use_old_bios_files = undef;
7252 if ($machine_type =~ m/^(\S+)\.pxe$/) {
7254 $use_old_bios_files = 1;
7256 my $kvmver = kvm_user_version
();
7257 # Note: kvm version < 2.4 use non-efi pxe files, and have problems when we
7258 # load new efi bios files on migration. So this hack is required to allow
7259 # live migration from qemu-2.2 to qemu-2.4, which is sometimes used when
7260 # updrading from proxmox-ve-3.X to proxmox-ve 4.0
7261 $use_old_bios_files = !qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 4);
7264 return ($use_old_bios_files, $machine_type);
7267 sub create_efidisk
($$$$$) {
7268 my ($storecfg, $storeid, $vmid, $fmt, $arch) = @_;
7270 my (undef, $ovmf_vars) = get_ovmf_files
($arch);
7271 die "EFI vars default image not found\n" if ! -f
$ovmf_vars;
7273 my $vars_size = PVE
::Tools
::convert_size
(-s
$ovmf_vars, 'b' => 'kb');
7274 my $volid = PVE
::Storage
::vdisk_alloc
($storecfg, $storeid, $vmid, $fmt, undef, $vars_size);
7275 PVE
::Storage
::activate_volumes
($storecfg, [$volid]);
7277 my $path = PVE
::Storage
::path
($storecfg, $volid);
7279 run_command
(['/usr/bin/qemu-img', 'convert', '-n', '-f', 'raw', '-O', $fmt, $ovmf_vars, $path]);
7281 die "Copying EFI vars image failed: $@" if $@;
7283 return ($volid, $vars_size);
7286 sub vm_iothreads_list
{
7289 my $res = vm_mon_cmd
($vmid, 'query-iothreads');
7292 foreach my $iothread (@$res) {
7293 $iothreads->{ $iothread->{id
} } = $iothread->{"thread-id"};
7300 my ($conf, $drive) = @_;
7304 if (!$conf->{scsihw
} || ($conf->{scsihw
} =~ m/^lsi/)) {
7306 } elsif ($conf->{scsihw
} && ($conf->{scsihw
} eq 'virtio-scsi-single')) {
7312 my $controller = int($drive->{index} / $maxdev);
7313 my $controller_prefix = ($conf->{scsihw
} && $conf->{scsihw
} eq 'virtio-scsi-single') ?
"virtioscsi" : "scsihw";
7315 return ($maxdev, $controller, $controller_prefix);
7318 sub add_hyperv_enlightenments
{
7319 my ($cpuFlags, $winversion, $machine_type, $kvmver, $bios, $gpu_passthrough, $hv_vendor_id) = @_;
7321 return if $winversion < 6;
7322 return if $bios && $bios eq 'ovmf' && $winversion < 8;
7324 if ($gpu_passthrough || defined($hv_vendor_id)) {
7325 $hv_vendor_id //= 'proxmox';
7326 push @$cpuFlags , "hv_vendor_id=$hv_vendor_id";
7329 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 3)) {
7330 push @$cpuFlags , 'hv_spinlocks=0x1fff';
7331 push @$cpuFlags , 'hv_vapic';
7332 push @$cpuFlags , 'hv_time';
7334 push @$cpuFlags , 'hv_spinlocks=0xffff';
7337 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 6)) {
7338 push @$cpuFlags , 'hv_reset';
7339 push @$cpuFlags , 'hv_vpindex';
7340 push @$cpuFlags , 'hv_runtime';
7343 if ($winversion >= 7) {
7344 push @$cpuFlags , 'hv_relaxed';
7346 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 2, 12)) {
7347 push @$cpuFlags , 'hv_synic';
7348 push @$cpuFlags , 'hv_stimer';
7351 if (qemu_machine_feature_enabled
($machine_type, $kvmver, 3, 1)) {
7352 push @$cpuFlags , 'hv_ipi';
7357 sub windows_version
{
7360 return 0 if !$ostype;
7364 if($ostype eq 'wxp' || $ostype eq 'w2k3' || $ostype eq 'w2k') {
7366 } elsif($ostype eq 'w2k8' || $ostype eq 'wvista') {
7368 } elsif ($ostype =~ m/^win(\d+)$/) {
7375 sub resolve_dst_disk_format
{
7376 my ($storecfg, $storeid, $src_volname, $format) = @_;
7377 my ($defFormat, $validFormats) = PVE
::Storage
::storage_default_format
($storecfg, $storeid);
7380 # if no target format is specified, use the source disk format as hint
7382 my $scfg = PVE
::Storage
::storage_config
($storecfg, $storeid);
7383 $format = qemu_img_format
($scfg, $src_volname);
7389 # test if requested format is supported - else use default
7390 my $supported = grep { $_ eq $format } @$validFormats;
7391 $format = $defFormat if !$supported;
7395 sub resolve_first_disk
{
7397 my @disks = PVE
::QemuServer
::valid_drive_names
();
7399 foreach my $ds (reverse @disks) {
7400 next if !$conf->{$ds};
7401 my $disk = PVE
::QemuServer
::parse_drive
($ds, $conf->{$ds});
7402 next if PVE
::QemuServer
::drive_is_cdrom
($disk);
7409 my ($uuid, $uuid_str);
7410 UUID
::generate
($uuid);
7411 UUID
::unparse
($uuid, $uuid_str);
7415 sub generate_smbios1_uuid
{
7416 return "uuid=".generate_uuid
();
7422 vm_mon_cmd
($vmid, 'nbd-server-stop');
7425 sub create_reboot_request
{
7427 open(my $fh, '>', "/run/qemu-server/$vmid.reboot")
7428 or die "failed to create reboot trigger file: $!\n";
7432 sub clear_reboot_request
{
7434 my $path = "/run/qemu-server/$vmid.reboot";
7437 $res = unlink($path);
7438 die "could not remove reboot request for $vmid: $!"
7439 if !$res && $! != POSIX
::ENOENT
;
7444 # bash completion helper
7446 sub complete_backup_archives
{
7447 my ($cmdname, $pname, $cvalue) = @_;
7449 my $cfg = PVE
::Storage
::config
();
7453 if ($cvalue =~ m/^([^:]+):/) {
7457 my $data = PVE
::Storage
::template_list
($cfg, $storeid, 'backup');
7460 foreach my $id (keys %$data) {
7461 foreach my $item (@{$data->{$id}}) {
7462 next if $item->{format
} !~ m/^vma\.(gz|lzo)$/;
7463 push @$res, $item->{volid
} if defined($item->{volid
});
7470 my $complete_vmid_full = sub {
7473 my $idlist = vmstatus
();
7477 foreach my $id (keys %$idlist) {
7478 my $d = $idlist->{$id};
7479 if (defined($running)) {
7480 next if $d->{template
};
7481 next if $running && $d->{status
} ne 'running';
7482 next if !$running && $d->{status
} eq 'running';
7491 return &$complete_vmid_full();
7494 sub complete_vmid_stopped
{
7495 return &$complete_vmid_full(0);
7498 sub complete_vmid_running
{
7499 return &$complete_vmid_full(1);
7502 sub complete_storage
{
7504 my $cfg = PVE
::Storage
::config
();
7505 my $ids = $cfg->{ids
};
7508 foreach my $sid (keys %$ids) {
7509 next if !PVE
::Storage
::storage_check_enabled
($cfg, $sid, undef, 1);
7510 next if !$ids->{$sid}->{content
}->{images
};