cmd/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = cmd
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps =  \
  41         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
  42         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
  43         $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
  44         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
  45         $(top_srcdir)/config/kernel-bio-failfast.m4 \
  46         $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
  47         $(top_srcdir)/config/kernel-blk-end-request.m4 \
  48         $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
  49         $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
  50         $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
  51         $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
  52         $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
  53         $(top_srcdir)/config/kernel-fmode-t.m4 \
  54         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
  55         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
  56         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
  57         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
  58         $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
  59         $(top_srcdir)/config/kernel-rq-is_sync.m4 \
  60         $(top_srcdir)/config/kernel-xattr-handler.m4 \
  61         $(top_srcdir)/config/kernel.m4 \
  62         $(top_srcdir)/config/user-arch.m4 \
  63         $(top_srcdir)/config/user-frame-larger-than.m4 \
  64         $(top_srcdir)/config/user-ioctl.m4 \
  65         $(top_srcdir)/config/user-libblkid.m4 \
  66         $(top_srcdir)/config/user-libuuid.m4 \
  67         $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
  68         $(top_srcdir)/config/user-selinux.m4 \
  69         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
  70         $(top_srcdir)/config/zfs-build.m4 \
  71         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
  72 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  73         $(ACLOCAL_M4)
  74 mkinstalldirs = $(install_sh) -d
  75 CONFIG_HEADER = $(top_builddir)/zfs_config.h
  76 CONFIG_CLEAN_FILES =
  77 CONFIG_CLEAN_VPATH_FILES =
  78 AM_V_GEN = $(am__v_GEN_$(V))
  79 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  80 am__v_GEN_0 = @echo "  GEN   " $@;
  81 AM_V_at = $(am__v_at_$(V))
  82 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  83 am__v_at_0 = @
  84 SOURCES =
  85 DIST_SOURCES =
  86 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  87         html-recursive info-recursive install-data-recursive \
  88         install-dvi-recursive install-exec-recursive \
  89         install-html-recursive install-info-recursive \
  90         install-pdf-recursive install-ps-recursive install-recursive \
  91         installcheck-recursive installdirs-recursive pdf-recursive \
  92         ps-recursive uninstall-recursive
  93 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  94   distclean-recursive maintainer-clean-recursive
  95 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  96         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  97         distdir
  98 ETAGS = etags
  99 CTAGS = ctags
 100 DIST_SUBDIRS = $(SUBDIRS)
 101 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 102 am__relativize = \
 103   dir0=`pwd`; \
 104   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 105   sed_rest='s,^[^/]*/*,,'; \
 106   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 107   sed_butlast='s,/*[^/]*$$,,'; \
 108   while test -n "$$dir1"; do \
 109     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 110     if test "$$first" != "."; then \
 111       if test "$$first" = ".."; then \
 112         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 113         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 114       else \
 115         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 116         if test "$$first2" = "$$first"; then \
 117           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 118         else \
 119           dir2="../$$dir2"; \
 120         fi; \
 121         dir0="$$dir0"/"$$first"; \
 122       fi; \
 123     fi; \
 124     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 125   done; \
 126   reldir="$$dir2"
 127 ACLOCAL = @ACLOCAL@
 128 ALIEN = @ALIEN@
 129 ALIEN_VERSION = @ALIEN_VERSION@
 130 AMTAR = @AMTAR@
 131 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 132 AR = @AR@
 133 AUTOCONF = @AUTOCONF@
 134 AUTOHEADER = @AUTOHEADER@
 135 AUTOMAKE = @AUTOMAKE@
 136 AWK = @AWK@
 137 CC = @CC@
 138 CCAS = @CCAS@
 139 CCASDEPMODE = @CCASDEPMODE@
 140 CCASFLAGS = @CCASFLAGS@
 141 CCDEPMODE = @CCDEPMODE@
 142 CFLAGS = @CFLAGS@
 143 CPP = @CPP@
 144 CPPFLAGS = @CPPFLAGS@
 145 CYGPATH_W = @CYGPATH_W@
 146 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 147 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 148 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 149 DEFS = @DEFS@
 150 DEPDIR = @DEPDIR@
 151 DPKG = @DPKG@
 152 DPKGBUILD = @DPKGBUILD@
 153 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 154 DPKG_VERSION = @DPKG_VERSION@
 155 DSYMUTIL = @DSYMUTIL@
 156 DUMPBIN = @DUMPBIN@
 157 ECHO_C = @ECHO_C@
 158 ECHO_N = @ECHO_N@
 159 ECHO_T = @ECHO_T@
 160 EGREP = @EGREP@
 161 EXEEXT = @EXEEXT@
 162 FGREP = @FGREP@
 163 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 164 GREP = @GREP@
 165 HAVE_ALIEN = @HAVE_ALIEN@
 166 HAVE_DPKG = @HAVE_DPKG@
 167 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 168 HAVE_RPM = @HAVE_RPM@
 169 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 170 INSTALL = @INSTALL@
 171 INSTALL_DATA = @INSTALL_DATA@
 172 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 173 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 174 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 175 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 176 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 177 LD = @LD@
 178 LDFLAGS = @LDFLAGS@
 179 LIBBLKID = @LIBBLKID@
 180 LIBOBJS = @LIBOBJS@
 181 LIBS = @LIBS@
 182 LIBSELINUX = @LIBSELINUX@
 183 LIBTOOL = @LIBTOOL@
 184 LIBUUID = @LIBUUID@
 185 LINUX = @LINUX@
 186 LINUX_OBJ = @LINUX_OBJ@
 187 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 188 LINUX_VERSION = @LINUX_VERSION@
 189 LIPO = @LIPO@
 190 LN_S = @LN_S@
 191 LTLIBOBJS = @LTLIBOBJS@
 192 MAINT = @MAINT@
 193 MAKEINFO = @MAKEINFO@
 194 MKDIR_P = @MKDIR_P@
 195 NM = @NM@
 196 NMEDIT = @NMEDIT@
 197 OBJDUMP = @OBJDUMP@
 198 OBJEXT = @OBJEXT@
 199 OTOOL = @OTOOL@
 200 OTOOL64 = @OTOOL64@
 201 PACKAGE = @PACKAGE@
 202 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 203 PACKAGE_NAME = @PACKAGE_NAME@
 204 PACKAGE_STRING = @PACKAGE_STRING@
 205 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 206 PACKAGE_VERSION = @PACKAGE_VERSION@
 207 PATH_SEPARATOR = @PATH_SEPARATOR@
 208 RANLIB = @RANLIB@
 209 RPM = @RPM@
 210 RPMBUILD = @RPMBUILD@
 211 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 212 RPM_VERSION = @RPM_VERSION@
 213 SED = @SED@
 214 SET_MAKE = @SET_MAKE@
 215 SHELL = @SHELL@
 216 SPL = @SPL@
 217 SPL_OBJ = @SPL_OBJ@
 218 SPL_SYMBOLS = @SPL_SYMBOLS@
 219 SPL_VERSION = @SPL_VERSION@
 220 STRIP = @STRIP@
 221 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 222 VENDOR = @VENDOR@
 223 VERSION = @VERSION@
 224 ZFS_CONFIG = @ZFS_CONFIG@
 225 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 226 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 227 ZFS_META_DATA = @ZFS_META_DATA@
 228 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 229 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 230 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 231 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 232 ZFS_META_NAME = @ZFS_META_NAME@
 233 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 234 ZFS_META_VERSION = @ZFS_META_VERSION@
 235 ZLIB = @ZLIB@
 236 abs_builddir = @abs_builddir@
 237 abs_srcdir = @abs_srcdir@
 238 abs_top_builddir = @abs_top_builddir@
 239 abs_top_srcdir = @abs_top_srcdir@
 240 ac_ct_CC = @ac_ct_CC@
 241 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 242 am__include = @am__include@
 243 am__leading_dot = @am__leading_dot@
 244 am__quote = @am__quote@
 245 am__tar = @am__tar@
 246 am__untar = @am__untar@
 247 bindir = @bindir@
 248 build = @build@
 249 build_alias = @build_alias@
 250 build_cpu = @build_cpu@
 251 build_os = @build_os@
 252 build_vendor = @build_vendor@
 253 builddir = @builddir@
 254 datadir = @datadir@
 255 datarootdir = @datarootdir@
 256 docdir = @docdir@
 257 dvidir = @dvidir@
 258 exec_prefix = @exec_prefix@
 259 host = @host@
 260 host_alias = @host_alias@
 261 host_cpu = @host_cpu@
 262 host_os = @host_os@
 263 host_vendor = @host_vendor@
 264 htmldir = @htmldir@
 265 includedir = @includedir@
 266 infodir = @infodir@
 267 install_sh = @install_sh@
 268 libdir = @libdir@
 269 libexecdir = @libexecdir@
 270 localedir = @localedir@
 271 localstatedir = @localstatedir@
 272 lt_ECHO = @lt_ECHO@
 273 mandir = @mandir@
 274 mkdir_p = @mkdir_p@
 275 oldincludedir = @oldincludedir@
 276 pdfdir = @pdfdir@
 277 prefix = @prefix@
 278 program_transform_name = @program_transform_name@
 279 psdir = @psdir@
 280 sbindir = @sbindir@
 281 sharedstatedir = @sharedstatedir@
 282 srcdir = @srcdir@
 283 sysconfdir = @sysconfdir@
 284 target = @target@
 285 target_alias = @target_alias@
 286 target_cpu = @target_cpu@
 287 target_os = @target_os@
 288 target_vendor = @target_vendor@
 289 top_build_prefix = @top_build_prefix@
 290 top_builddir = @top_builddir@
 291 top_srcdir = @top_srcdir@
 292 SUBDIRS = zfs zpool zpool_id zpool_layout zdb zinject ztest zpios
 293 all: all-recursive
 294
 295 .SUFFIXES:
 296 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 297         @for dep in $?; do \
 298           case '$(am__configure_deps)' in \
 299             *$$dep*) \
 300               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 301                 && { if test -f $@; then exit 0; else break; fi; }; \
 302               exit 1;; \
 303           esac; \
 304         done; \
 305         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/Makefile'; \
 306         $(am__cd) $(top_srcdir) && \
 307           $(AUTOMAKE) --gnu cmd/Makefile
 308 .PRECIOUS: Makefile
 309 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 310         @case '$?' in \
 311           *config.status*) \
 312             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 313           *) \
 314             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 315             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 316         esac;
 317
 318 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 319         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 320
 321 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 322         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 323 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 324         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 325 $(am__aclocal_m4_deps):
 326
 327 mostlyclean-libtool:
 328         -rm -f *.lo
 329
 330 clean-libtool:
 331         -rm -rf .libs _libs
 332
 333 # This directory's subdirectories are mostly independent; you can cd
 334 # into them and run `make' without going through this Makefile.
 335 # To change the values of `make' variables: instead of editing Makefiles,
 336 # (1) if the variable is set in `config.status', edit `config.status'
 337 #     (which will cause the Makefiles to be regenerated when you run `make');
 338 # (2) otherwise, pass the desired values on the `make' command line.
 339 $(RECURSIVE_TARGETS):
 340         @fail= failcom='exit 1'; \
 341         for f in x $$MAKEFLAGS; do \
 342           case $$f in \
 343             *=* | --[!k]*);; \
 344             *k*) failcom='fail=yes';; \
 345           esac; \
 346         done; \
 347         dot_seen=no; \
 348         target=`echo $@ | sed s/-recursive//`; \
 349         list='$(SUBDIRS)'; for subdir in $$list; do \
 350           echo "Making $$target in $$subdir"; \
 351           if test "$$subdir" = "."; then \
 352             dot_seen=yes; \
 353             local_target="$$target-am"; \
 354           else \
 355             local_target="$$target"; \
 356           fi; \
 357           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 358           || eval $$failcom; \
 359         done; \
 360         if test "$$dot_seen" = "no"; then \
 361           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 362         fi; test -z "$$fail"
 363
 364 $(RECURSIVE_CLEAN_TARGETS):
 365         @fail= failcom='exit 1'; \
 366         for f in x $$MAKEFLAGS; do \
 367           case $$f in \
 368             *=* | --[!k]*);; \
 369             *k*) failcom='fail=yes';; \
 370           esac; \
 371         done; \
 372         dot_seen=no; \
 373         case "$@" in \
 374           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 375           *) list='$(SUBDIRS)' ;; \
 376         esac; \
 377         rev=''; for subdir in $$list; do \
 378           if test "$$subdir" = "."; then :; else \
 379             rev="$$subdir $$rev"; \
 380           fi; \
 381         done; \
 382         rev="$$rev ."; \
 383         target=`echo $@ | sed s/-recursive//`; \
 384         for subdir in $$rev; do \
 385           echo "Making $$target in $$subdir"; \
 386           if test "$$subdir" = "."; then \
 387             local_target="$$target-am"; \
 388           else \
 389             local_target="$$target"; \
 390           fi; \
 391           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 392           || eval $$failcom; \
 393         done && test -z "$$fail"
 394 tags-recursive:
 395         list='$(SUBDIRS)'; for subdir in $$list; do \
 396           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 397         done
 398 ctags-recursive:
 399         list='$(SUBDIRS)'; for subdir in $$list; do \
 400           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 401         done
 402
 403 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 404         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 405         unique=`for i in $$list; do \
 406             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 407           done | \
 408           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 409               END { if (nonempty) { for (i in files) print i; }; }'`; \
 410         mkid -fID $$unique
 411 tags: TAGS
 412
 413 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 414                 $(TAGS_FILES) $(LISP)
 415         set x; \
 416         here=`pwd`; \
 417         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 418           include_option=--etags-include; \
 419           empty_fix=.; \
 420         else \
 421           include_option=--include; \
 422           empty_fix=; \
 423         fi; \
 424         list='$(SUBDIRS)'; for subdir in $$list; do \
 425           if test "$$subdir" = .; then :; else \
 426             test ! -f $$subdir/TAGS || \
 427               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 428           fi; \
 429         done; \
 430         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 431         unique=`for i in $$list; do \
 432             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 433           done | \
 434           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 435               END { if (nonempty) { for (i in files) print i; }; }'`; \
 436         shift; \
 437         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 438           test -n "$$unique" || unique=$$empty_fix; \
 439           if test $$# -gt 0; then \
 440             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 441               "$$@" $$unique; \
 442           else \
 443             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 444               $$unique; \
 445           fi; \
 446         fi
 447 ctags: CTAGS
 448 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 449                 $(TAGS_FILES) $(LISP)
 450         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 451         unique=`for i in $$list; do \
 452             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 453           done | \
 454           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 455               END { if (nonempty) { for (i in files) print i; }; }'`; \
 456         test -z "$(CTAGS_ARGS)$$unique" \
 457           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 458              $$unique
 459
 460 GTAGS:
 461         here=`$(am__cd) $(top_builddir) && pwd` \
 462           && $(am__cd) $(top_srcdir) \
 463           && gtags -i $(GTAGS_ARGS) "$$here"
 464
 465 distclean-tags:
 466         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 467
 468 distdir: $(DISTFILES)
 469         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 470         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 471         list='$(DISTFILES)'; \
 472           dist_files=`for file in $$list; do echo $$file; done | \
 473           sed -e "s|^$$srcdirstrip/||;t" \
 474               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 475         case $$dist_files in \
 476           */*) $(MKDIR_P) `echo "$$dist_files" | \
 477                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 478                            sort -u` ;; \
 479         esac; \
 480         for file in $$dist_files; do \
 481           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 482           if test -d $$d/$$file; then \
 483             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 484             if test -d "$(distdir)/$$file"; then \
 485               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 486             fi; \
 487             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 488               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 489               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 490             fi; \
 491             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 492           else \
 493             test -f "$(distdir)/$$file" \
 494             || cp -p $$d/$$file "$(distdir)/$$file" \
 495             || exit 1; \
 496           fi; \
 497         done
 498         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 499           if test "$$subdir" = .; then :; else \
 500             test -d "$(distdir)/$$subdir" \
 501             || $(MKDIR_P) "$(distdir)/$$subdir" \
 502             || exit 1; \
 503           fi; \
 504         done
 505         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 506           if test "$$subdir" = .; then :; else \
 507             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 508             $(am__relativize); \
 509             new_distdir=$$reldir; \
 510             dir1=$$subdir; dir2="$(top_distdir)"; \
 511             $(am__relativize); \
 512             new_top_distdir=$$reldir; \
 513             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 514             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 515             ($(am__cd) $$subdir && \
 516               $(MAKE) $(AM_MAKEFLAGS) \
 517                 top_distdir="$$new_top_distdir" \
 518                 distdir="$$new_distdir" \
 519                 am__remove_distdir=: \
 520                 am__skip_length_check=: \
 521                 am__skip_mode_fix=: \
 522                 distdir) \
 523               || exit 1; \
 524           fi; \
 525         done
 526 check-am: all-am
 527 check: check-recursive
 528 all-am: Makefile
 529 installdirs: installdirs-recursive
 530 installdirs-am:
 531 install: install-recursive
 532 install-exec: install-exec-recursive
 533 install-data: install-data-recursive
 534 uninstall: uninstall-recursive
 535
 536 install-am: all-am
 537         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 538
 539 installcheck: installcheck-recursive
 540 install-strip:
 541         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 542           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 543           `test -z '$(STRIP)' || \
 544             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 545 mostlyclean-generic:
 546
 547 clean-generic:
 548
 549 distclean-generic:
 550         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 551         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 552
 553 maintainer-clean-generic:
 554         @echo "This command is intended for maintainers to use"
 555         @echo "it deletes files that may require special tools to rebuild."
 556 clean: clean-recursive
 557
 558 clean-am: clean-generic clean-libtool mostlyclean-am
 559
 560 distclean: distclean-recursive
 561         -rm -f Makefile
 562 distclean-am: clean-am distclean-generic distclean-tags
 563
 564 dvi: dvi-recursive
 565
 566 dvi-am:
 567
 568 html: html-recursive
 569
 570 html-am:
 571
 572 info: info-recursive
 573
 574 info-am:
 575
 576 install-data-am:
 577
 578 install-dvi: install-dvi-recursive
 579
 580 install-dvi-am:
 581
 582 install-exec-am:
 583
 584 install-html: install-html-recursive
 585
 586 install-html-am:
 587
 588 install-info: install-info-recursive
 589
 590 install-info-am:
 591
 592 install-man:
 593
 594 install-pdf: install-pdf-recursive
 595
 596 install-pdf-am:
 597
 598 install-ps: install-ps-recursive
 599
 600 install-ps-am:
 601
 602 installcheck-am:
 603
 604 maintainer-clean: maintainer-clean-recursive
 605         -rm -f Makefile
 606 maintainer-clean-am: distclean-am maintainer-clean-generic
 607
 608 mostlyclean: mostlyclean-recursive
 609
 610 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 611
 612 pdf: pdf-recursive
 613
 614 pdf-am:
 615
 616 ps: ps-recursive
 617
 618 ps-am:
 619
 620 uninstall-am:
 621
 622 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 623         install-am install-strip tags-recursive
 624
 625 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 626         all all-am check check-am clean clean-generic clean-libtool \
 627         ctags ctags-recursive distclean distclean-generic \
 628         distclean-libtool distclean-tags distdir dvi dvi-am html \
 629         html-am info info-am install install-am install-data \
 630         install-data-am install-dvi install-dvi-am install-exec \
 631         install-exec-am install-html install-html-am install-info \
 632         install-info-am install-man install-pdf install-pdf-am \
 633         install-ps install-ps-am install-strip installcheck \
 634         installcheck-am installdirs installdirs-am maintainer-clean \
 635         maintainer-clean-generic mostlyclean mostlyclean-generic \
 636         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 637         uninstall uninstall-am
 638
 639
 640 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 641 # Otherwise a system limit (for SysV at least) may be exceeded.
 642 .NOEXPORT: