2 # Generated from ltmain.m4sh.
4 # ltmain.sh (GNU libtool) 2.2.6b
5 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
7 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
8 # This is free software; see the source for copying conditions. There is NO
9 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
11 # GNU Libtool is free software; you can redistribute it and/or modify
12 # it under the terms of the GNU General Public License as published by
13 # the Free Software Foundation; either version 2 of the License, or
14 # (at your option) any later version.
16 # As a special exception to the GNU General Public License,
17 # if you distribute this file as part of a program or library that
18 # is built using GNU Libtool, you may include this file under the
19 # same distribution terms that you use for the rest of that program.
21 # GNU Libtool is distributed in the hope that it will be useful, but
22 # WITHOUT ANY WARRANTY; without even the implied warranty of
23 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
24 # General Public License for more details.
26 # You should have received a copy of the GNU General Public License
27 # along with GNU Libtool; see the file COPYING. If not, a copy
28 # can be downloaded from http://www.gnu.org/licenses/gpl.html,
29 # or obtained by writing to the Free Software Foundation, Inc.,
30 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
32 # Usage: $progname [OPTION]... [MODE-ARG]...
34 # Provide generalized library-building support services.
36 # --config show all configuration variables
37 # --debug enable verbose shell tracing
38 # -n, --dry-run display commands without modifying any files
39 # --features display basic configuration information and exit
40 # --mode=MODE use operation mode MODE
41 # --preserve-dup-deps don't remove duplicate dependency libraries
42 # --quiet, --silent don't print informational messages
43 # --tag=TAG use configuration variables from tag TAG
44 # -v, --verbose print informational messages (default)
45 # --version print version information
46 # -h, --help print short or long help message
48 # MODE must be one of the following:
50 # clean remove files from the build directory
51 # compile compile a source file into a libtool object
52 # execute automatically set library path, then run a program
53 # finish complete the installation of libtool libraries
54 # install install libraries or executables
55 # link create a library or an executable
56 # uninstall remove libraries from an installed directory
58 # MODE-ARGS vary depending on the MODE.
59 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
61 # When reporting a bug, please describe a test case to reproduce it and
62 # include the following information:
67 # compiler flags: $LTCFLAGS
68 # linker: $LD (gnu? $with_gnu_ld)
69 # $progname: (GNU libtool) 2.2.6b
70 # automake: $automake_version
71 # autoconf: $autoconf_version
73 # Report bugs to <bug-libtool@gnu.org>.
79 package_revision
=1.3017
81 # Be Bourne compatible
82 if test -n "${ZSH_VERSION+set}" && (emulate sh
) >/dev
/null
2>&1; then
85 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
86 # is contrary to our usage. Disable this feature.
87 alias -g '${1+"$@"}'='"$@"'
90 case `(set -o) 2>/dev/null` in *posix
*) set -o posix
;; esac
92 BIN_SH
=xpg4
; export BIN_SH
# for Tru64
93 DUALCASE
=1; export DUALCASE
# for MKS sh
95 # NLS nuisances: We save the old values to restore during execute mode.
96 # Only set LANG and LC_ALL to C if already set.
97 # These must not be set unconditionally because not all systems understand
98 # e.g. LANG=C (notably SCO).
101 for lt_var
in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
103 eval "if test \"\${$lt_var+set}\" = set; then
104 save_$lt_var=\$$lt_var
107 lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
108 lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
120 : ${EGREP="/bin/grep -E"}
121 : ${FGREP="/bin/grep -F"}
122 : ${GREP="/bin/grep"}
129 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
130 : ${Xsed="$SED -e 1s/^X//"}
135 EXIT_MISMATCH
=63 # $? = 63 is used to indicate version mismatch to missing.
136 EXIT_SKIP
=77 # $? = 77 is used to indicate a skipped test to automake.
138 exit_status
=$EXIT_SUCCESS
140 # Make sure IFS has a sensible default
145 dirname="s,/[^/]*$,,"
148 # func_dirname_and_basename file append nondir_replacement
149 # perform func_basename and func_dirname in a single function
151 # dirname: Compute the dirname of FILE. If nonempty,
152 # add APPEND to the result, otherwise set result
153 # to NONDIR_REPLACEMENT.
154 # value returned in "$func_dirname_result"
155 # basename: Compute filename of FILE.
156 # value retuned in "$func_basename_result"
157 # Implementation must be kept synchronized with func_dirname
158 # and func_basename. For efficiency, we do not delegate to
159 # those functions but instead duplicate the functionality here.
160 func_dirname_and_basename
()
162 # Extract subdirectory from the argument.
163 func_dirname_result
=`$ECHO "X${1}" | $Xsed -e "$dirname"`
164 if test "X$func_dirname_result" = "X${1}"; then
165 func_dirname_result
="${3}"
167 func_dirname_result
="$func_dirname_result${2}"
169 func_basename_result
=`$ECHO "X${1}" | $Xsed -e "$basename"`
172 # Generated shell functions inserted here.
174 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
175 # is ksh but when the shell is invoked as "sh" and the current value of
176 # the _XPG environment variable is not equal to 1 (one), the special
177 # positional parameter $0, within a function call, is the name of the
181 # The name of this program:
182 # In the unlikely event $progname began with a '-', it would play havoc with
183 # func_echo (imagine progname=-n), so we prepend ./ in that case:
184 func_dirname_and_basename
"$progpath"
185 progname
=$func_basename_result
187 -*) progname
=.
/$progname ;;
190 # Make sure we have an absolute path for reexecution:
192 [\\/]*|
[A-Za-z
]:\\*) ;;
194 progdir
=$func_dirname_result
195 progdir
=`cd "$progdir" && pwd`
196 progpath
="$progdir/$progname"
201 for progdir
in $PATH; do
203 test -x "$progdir/$progname" && break
206 test -n "$progdir" || progdir
=`pwd`
207 progpath
="$progdir/$progname"
211 # Sed substitution that helps us do robust quoting. It backslashifies
212 # metacharacters that are still active within double-quoted strings.
213 Xsed
="${SED}"' -e 1s/^X//'
214 sed_quote_subst
='s/\([`"$\\]\)/\\\1/g'
216 # Same as above, but do not quote variable references.
217 double_quote_subst
='s/\(["`\\]\)/\\\1/g'
219 # Re-`\' parameter expansions in output of double_quote_subst that were
220 # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
221 # in input to double_quote_subst, that '$' was protected from expansion.
222 # Since each input `\' is now two `\'s, look for any number of runs of
223 # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
228 sed_double_backslash
="\
232 s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
243 # Echo program name prefixed message, along with the current mode
244 # name if it has been set yet.
247 $ECHO "$progname${mode+: }$mode: $*"
250 # func_verbose arg...
251 # Echo program name prefixed message in verbose mode only.
254 $opt_verbose && func_echo
${1+"$@"}
256 # A bug in bash halts the script if the last line of a function
257 # fails when set -e is in force, so we need another command to
263 # Echo program name prefixed message to standard error.
266 $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
269 # func_warning arg...
270 # Echo program name prefixed warning message to standard error.
273 $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
279 # func_fatal_error arg...
280 # Echo program name prefixed message to standard error, and exit.
287 # func_fatal_help arg...
288 # Echo program name prefixed message to standard error, followed by
289 # a help hint, and exit.
293 func_fatal_error
"$help"
295 help="Try \`$progname --help' for more information." ## default
298 # func_grep expression filename
299 # Check whether EXPRESSION matches any line of FILENAME, without output.
302 $GREP "$1" "$2" >/dev
/null
2>&1
306 # func_mkdir_p directory-path
307 # Make sure the entire path to DIRECTORY-PATH is available.
310 my_directory_path
="$1"
313 if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
315 # Protect directory names starting with `-'
316 case $my_directory_path in
317 -*) my_directory_path
="./$my_directory_path" ;;
320 # While some portion of DIR does not yet exist...
321 while test ! -d "$my_directory_path"; do
322 # ...make a list in topmost first order. Use a colon delimited
323 # list incase some portion of path contains whitespace.
324 my_dir_list
="$my_directory_path:$my_dir_list"
326 # If the last portion added has no slash in it, the list is done
327 case $my_directory_path in */*) ;; *) break ;; esac
329 # ...otherwise throw away the child directory and loop
330 my_directory_path
=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
332 my_dir_list
=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
334 save_mkdir_p_IFS
="$IFS"; IFS
=':'
335 for my_dir
in $my_dir_list; do
336 IFS
="$save_mkdir_p_IFS"
337 # mkdir can fail with a `File exist' error if two processes
338 # try to create one of the directories concurrently. Don't
340 $MKDIR "$my_dir" 2>/dev
/null ||
:
342 IFS
="$save_mkdir_p_IFS"
344 # Bail out if we (or some other process) failed to create a directory.
345 test -d "$my_directory_path" || \
346 func_fatal_error
"Failed to create \`$1'"
351 # func_mktempdir [string]
352 # Make a temporary directory that won't clash with other running
353 # libtool processes, and avoids race conditions if possible. If
354 # given, STRING is the basename for that directory.
357 my_template
="${TMPDIR-/tmp}/${1-$progname}"
359 if test "$opt_dry_run" = ":"; then
360 # Return a directory name, but don't create it in dry-run mode
361 my_tmpdir
="${my_template}-$$"
364 # If mktemp works, use that first and foremost
365 my_tmpdir
=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
367 if test ! -d "$my_tmpdir"; then
368 # Failing that, at least try and use $RANDOM to avoid a race
369 my_tmpdir
="${my_template}-${RANDOM-0}$$"
371 save_mktempdir_umask
=`umask`
374 umask $save_mktempdir_umask
377 # If we're not in dry-run mode, bomb out on failure
378 test -d "$my_tmpdir" || \
379 func_fatal_error
"cannot create temporary directory \`$my_tmpdir'"
382 $ECHO "X$my_tmpdir" |
$Xsed
386 # func_quote_for_eval arg
387 # Aesthetically quote ARG to be evaled later.
388 # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
389 # is double-quoted, suitable for a subsequent eval, whereas
390 # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
391 # which are still active within double quotes backslashified.
392 func_quote_for_eval
()
396 func_quote_for_eval_unquoted_result=`$ECHO "X$1" |
$Xsed -e "$sed_quote_subst"` ;;
398 func_quote_for_eval_unquoted_result="$1" ;;
401 case $func_quote_for_eval_unquoted_result in
402 # Double-quote args containing shell metacharacters to delay
403 # word splitting, command substitution and and variable
404 # expansion for a subsequent eval.
405 # Many Bourne shells cannot handle close brackets correctly
406 # in scan sets, so we specify it separately.
407 *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
408 func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
411 func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
416 # func_quote_for_expand arg
417 # Aesthetically quote ARG to be evaled later; same as above,
418 # but do not quote variable references.
419 func_quote_for_expand ()
423 my_arg
=`$ECHO "X$1" | $Xsed \
424 -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
430 # Double-quote args containing shell metacharacters to delay
431 # word splitting and command substitution for a subsequent eval.
432 # Many Bourne shells cannot handle close brackets correctly
433 # in scan sets, so we specify it separately.
434 *[\
[\~\
#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
439 func_quote_for_expand_result
="$my_arg"
443 # func_show_eval cmd [fail_exp]
444 # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
445 # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
446 # is given, then evaluate it.
452 ${opt_silent-false} ||
{
453 func_quote_for_expand
"$my_cmd"
454 eval "func_echo $func_quote_for_expand_result"
457 if ${opt_dry_run-false}; then :; else
460 if test "$my_status" -eq 0; then :; else
461 eval "(exit $my_status); $my_fail_exp"
467 # func_show_eval_locale cmd [fail_exp]
468 # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
469 # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
470 # is given, then evaluate it. Use the saved locale for evaluation.
471 func_show_eval_locale
()
476 ${opt_silent-false} ||
{
477 func_quote_for_expand
"$my_cmd"
478 eval "func_echo $func_quote_for_expand_result"
481 if ${opt_dry_run-false}; then :; else
482 eval "$lt_user_locale
485 eval "$lt_safe_locale"
486 if test "$my_status" -eq 0; then :; else
487 eval "(exit $my_status); $my_fail_exp"
497 # Echo version message to standard output and exit.
500 $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
503 s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
510 # Echo short help message to standard output and exit.
513 $SED -n '/^# Usage:/,/# -h/ {
516 s/\$progname/'$progname'/
520 $ECHO "run \`$progname --help | more' for full usage"
525 # Echo long help message to standard output and exit.
528 $SED -n '/^# Usage:/,/# Report bugs to/ {
531 s*\$progname*'$progname'*
533 s*\$SHELL*'"$SHELL"'*
535 s*\$LTCFLAGS*'"$LTCFLAGS"'*
537 s/\$with_gnu_ld/'"$with_gnu_ld"'/
538 s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
539 s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
545 # func_missing_arg argname
546 # Echo program name prefixed message to standard error and set global
550 func_error
"missing argument for $1"
560 # Check that we have a working $ECHO.
561 if test "X$1" = X--no-reexec
; then
562 # Discard the --no-reexec flag, and continue.
564 elif test "X$1" = X--fallback-echo
; then
565 # Avoid inline document here, it may be left over
567 elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
568 # Yippee, $ECHO works!
571 # Restart under the correct shell, and then maybe $ECHO will work.
572 exec $SHELL "$progpath" --no-reexec ${1+"$@"}
575 if test "X$1" = X--fallback-echo
; then
576 # used as fallback echo
584 magic
="%%%MAGIC variable%%%"
585 magic_exe
="%%%MAGIC EXE variable%%%"
592 lo2o
="s/\\.lo\$/.${objext}/"
593 o2lo
="s/\\.${objext}\$/.lo/"
598 opt_duplicate_deps
=false
602 # If this variable is set in any of the actions, the command in it
603 # will be execed at the end. This prevents here-documents from being
604 # left over by shells.
607 # func_fatal_configuration arg...
608 # Echo program name prefixed message to standard error, followed by
609 # a configuration failure hint, and exit.
610 func_fatal_configuration
()
613 func_error
"See the $PACKAGE documentation for more information."
614 func_fatal_error
"Fatal configuration error."
619 # Display the configuration for all the tags in this script.
622 re_begincf
='^# ### BEGIN LIBTOOL'
623 re_endcf
='^# ### END LIBTOOL'
625 # Default configuration.
626 $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
628 # Now print the configurations for the tags.
629 for tagname
in $taglist; do
630 $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
637 # Display the features supported by this script.
641 if test "$build_libtool_libs" = yes; then
642 $ECHO "enable shared libraries"
644 $ECHO "disable shared libraries"
646 if test "$build_old_libs" = yes; then
647 $ECHO "enable static libraries"
649 $ECHO "disable static libraries"
655 # func_enable_tag tagname
656 # Verify that TAGNAME is valid, and either flag an error and exit, or
657 # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
664 re_begincf
="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
665 re_endcf
="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
666 sed_extractcf
="/$re_begincf/,/$re_endcf/p"
671 func_fatal_error
"invalid tag name: $tagname"
675 # Don't test for the "default" C tag, as we know it's
676 # there but not specially marked.
680 if $GREP "$re_begincf" "$progpath" >/dev
/null
2>&1; then
681 taglist
="$taglist $tagname"
683 # Evaluate the configuration. Be careful to quote the path
684 # and the sed script, to avoid splitting on whitespace, but
685 # also don't use non-portable quotes within backquotes within
686 # quotes we have to do it in 2 steps:
687 extractedcf
=`$SED -n -e "$sed_extractcf" < "$progpath"`
690 func_error
"ignoring unknown tag $tagname"
696 # Parse options once, thoroughly. This comes as soon as possible in
697 # the script to make things like `libtool --version' happen quickly.
700 # Shorthand for --mode=foo, only valid as the first argument
703 shift; set dummy
--mode clean
${1+"$@"}; shift
705 compile|compil|compi|comp|com|co|c
)
706 shift; set dummy
--mode compile
${1+"$@"}; shift
708 execute|execut|execu|
exec|exe|ex|e
)
709 shift; set dummy
--mode execute
${1+"$@"}; shift
711 finish|finis|fini|fin|
fi|f
)
712 shift; set dummy
--mode finish
${1+"$@"}; shift
714 install|instal|insta|inst|ins|
in|i
)
715 shift; set dummy
--mode install ${1+"$@"}; shift
718 shift; set dummy
--mode link
${1+"$@"}; shift
720 uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u
)
721 shift; set dummy
--mode uninstall
${1+"$@"}; shift
725 # Parse non-mode specific arguments:
726 while test "$#" -gt 0; do
731 --config) func_config
;;
733 --debug) preserve_args
="$preserve_args $opt"
734 func_echo
"enabling shell trace mode"
739 -dlopen) test "$#" -eq 0 && func_missing_arg
"$opt" && break
740 execute_dlfiles
="$execute_dlfiles $1"
744 --dry-run |
-n) opt_dry_run
=: ;;
745 --features) func_features
;;
746 --finish) mode
="finish" ;;
748 --mode) test "$#" -eq 0 && func_missing_arg
"$opt" && break
750 # Valid mode arguments:
760 # Catch anything else as an error
761 *) func_error
"invalid argument for $opt"
772 opt_duplicate_deps
=: ;;
774 --quiet|
--silent) preserve_args
="$preserve_args $opt"
778 --verbose|
-v) preserve_args
="$preserve_args $opt"
782 --tag) test "$#" -eq 0 && func_missing_arg
"$opt" && break
783 preserve_args
="$preserve_args $opt $1"
784 func_enable_tag
"$1" # tagname is set here
788 # Separate optargs to long options:
789 -dlopen=*|
--mode=*|
--tag=*)
790 func_opt_split
"$opt"
791 set dummy
"$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
795 -\?|
-h) func_usage
;;
796 --help) opt_help
=: ;;
797 --version) func_version
;;
799 -*) func_fatal_help
"unrecognized option \`$opt'" ;;
809 *cygwin
* |
*mingw
* |
*pw32
* |
*cegcc
*)
810 # don't eliminate duplications in $postdeps and $predeps
811 opt_duplicate_compiler_generated_deps
=:
814 opt_duplicate_compiler_generated_deps
=$opt_duplicate_deps
818 # Having warned about all mis-specified options, bail out if
819 # anything was wrong.
820 $exit_cmd $EXIT_FAILURE
823 # func_check_version_match
824 # Ensure that we are using m4 macros, and libtool script from the same
825 # release of libtool.
826 func_check_version_match
()
828 if test "$package_revision" != "$macro_revision"; then
829 if test "$VERSION" != "$macro_version"; then
830 if test -z "$macro_version"; then
832 $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
833 $progname: definition of this LT_INIT comes from an older release.
834 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
835 $progname: and run autoconf again.
839 $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
840 $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
841 $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
842 $progname: and run autoconf again.
847 $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
848 $progname: but the definition of this LT_INIT comes from revision $macro_revision.
849 $progname: You should recreate aclocal.m4 with macros from revision $package_revision
850 $progname: of $PACKAGE $VERSION and run autoconf again.
864 # Sanity checks first:
865 func_check_version_match
867 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
868 func_fatal_configuration
"not configured to build any kind of library"
871 test -z "$mode" && func_fatal_error
"error: you must specify a MODE."
875 eval std_shrext
=\"$shrext_cmds\"
878 # Only execute mode is allowed to have -dlopen flags.
879 if test -n "$execute_dlfiles" && test "$mode" != execute
; then
880 func_error
"unrecognized option \`-dlopen'"
885 # Change the help message to a mode-specific one.
887 help="Try \`$progname --help --mode=$mode' for more information."
892 # True iff FILE is a libtool `.la' library or `.lo' object file.
893 # This function is only a basic sanity check; it will hardly flush out
894 # determined imposters.
898 $SED -e 4q
"$1" 2>/dev
/null \
899 |
$GREP "^# Generated by .*$PACKAGE" > /dev
/null
2>&1
902 # func_lalib_unsafe_p file
903 # True iff FILE is a libtool `.la' library or `.lo' object file.
904 # This function implements the same check as func_lalib_p without
905 # resorting to external programs. To this end, it redirects stdin and
906 # closes it afterwards, without saving the original file descriptor.
907 # As a safety measure, use it only where a negative result would be
908 # fatal anyway. Works if `file' does not exist.
909 func_lalib_unsafe_p
()
912 if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
913 for lalib_p_l
in 1 2 3 4
916 case "$lalib_p_line" in
917 \
#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
922 test "$lalib_p" = yes
925 # func_ltwrapper_script_p file
926 # True iff FILE is a libtool wrapper script
927 # This function is only a basic sanity check; it will hardly flush out
928 # determined imposters.
929 func_ltwrapper_script_p
()
934 # func_ltwrapper_executable_p file
935 # True iff FILE is a libtool wrapper executable
936 # This function is only a basic sanity check; it will hardly flush out
937 # determined imposters.
938 func_ltwrapper_executable_p
()
940 func_ltwrapper_exec_suffix
=
943 *) func_ltwrapper_exec_suffix
=.exe
;;
945 $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev
/null
2>&1
948 # func_ltwrapper_scriptname file
949 # Assumes file is an ltwrapper_executable
950 # uses $file to determine the appropriate filename for a
951 # temporary ltwrapper_script.
952 func_ltwrapper_scriptname
()
954 func_ltwrapper_scriptname_result
=""
955 if func_ltwrapper_executable_p
"$1"; then
956 func_dirname_and_basename
"$1" "" "."
957 func_stripname
'' '.exe' "$func_basename_result"
958 func_ltwrapper_scriptname_result
="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
962 # func_ltwrapper_p file
963 # True iff FILE is a libtool wrapper script or wrapper executable
964 # This function is only a basic sanity check; it will hardly flush out
965 # determined imposters.
968 func_ltwrapper_script_p
"$1" || func_ltwrapper_executable_p
"$1"
972 # func_execute_cmds commands fail_cmd
973 # Execute tilde-delimited COMMANDS.
974 # If FAIL_CMD is given, eval that upon failure.
975 # FAIL_CMD may read-access the current command in variable CMD!
979 save_ifs
=$IFS; IFS
='~'
983 func_show_eval
"$cmd" "${2-:}"
990 # Source FILE, adding directory component if necessary.
991 # Note that it is not necessary on cygwin/mingw to append a dot to
992 # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
993 # behavior happens only for exec(3), not for open(2)! Also, sourcing
994 # `FILE.' does not work on cygwin managed mounts.
999 */* |
*\\*) .
"$1" ;;
1005 # func_infer_tag arg
1006 # Infer tagged configuration to use if any are available and
1007 # if one wasn't chosen via the "--tag" command line option.
1008 # Only attempt this if the compiler in the base compile
1009 # command doesn't match the default compiler.
1010 # arg is usually of the form 'gcc ...'
1014 if test -n "$available_tags" && test -z "$tagname"; then
1017 func_quote_for_eval
"$arg"
1018 CC_quoted
="$CC_quoted $func_quote_for_eval_result"
1021 # Blanks in the command may have been stripped by the calling shell,
1022 # but not from the CC environment variable when configure was run.
1023 " $CC "* |
"$CC "* |
" `$ECHO $CC` "* |
"`$ECHO $CC` "* |
" $CC_quoted"* |
"$CC_quoted "* |
" `$ECHO $CC_quoted` "* |
"`$ECHO $CC_quoted` "*) ;;
1024 # Blanks at the start of $base_compile will cause this to fail
1025 # if we don't check for them as well.
1027 for z
in $available_tags; do
1028 if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev
/null
; then
1029 # Evaluate the configuration.
1030 eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
1033 # Double-quote args containing other shell metacharacters.
1034 func_quote_for_eval
"$arg"
1035 CC_quoted
="$CC_quoted $func_quote_for_eval_result"
1038 " $CC "* |
"$CC "* |
" `$ECHO $CC` "* |
"`$ECHO $CC` "* |
" $CC_quoted"* |
"$CC_quoted "* |
" `$ECHO $CC_quoted` "* |
"`$ECHO $CC_quoted` "*)
1039 # The compiler in the base compile command matches
1040 # the one in the tagged configuration.
1041 # Assume this is the tagged configuration we want.
1048 # If $tagname still isn't set, then no tagged configuration
1049 # was found and let the user know that the "--tag" command
1050 # line option must be used.
1051 if test -z "$tagname"; then
1052 func_echo
"unable to infer tagged configuration"
1053 func_fatal_error
"specify a tag with \`--tag'"
1055 # func_verbose "using $tagname tagged configuration"
1064 # func_write_libtool_object output_name pic_name nonpic_name
1065 # Create a libtool object file (analogous to a ".la" file),
1066 # but don't create it if we're doing a dry run.
1067 func_write_libtool_object
()
1070 if test "$build_libtool_libs" = yes; then
1076 if test "$build_old_libs" = yes; then
1077 write_oldobj
=\'${3}\'
1083 cat >${write_libobj}T
<<EOF
1084 # $write_libobj - a libtool object file
1085 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
1087 # Please DO NOT delete this file!
1088 # It is necessary for linking the library.
1090 # Name of the PIC object.
1091 pic_object=$write_lobj
1093 # Name of the non-PIC object
1094 non_pic_object=$write_oldobj
1097 $MV "${write_libobj}T" "${write_libobj}"
1101 # func_mode_compile arg...
1102 func_mode_compile
()
1105 # Get the compilation command and the source file.
1107 srcfile
="$nonopt" # always keep a non-empty value in "srcfile"
1119 # do not "continue". Instead, add this to base_compile
1131 # Accept any command-line options.
1134 test -n "$libobj" && \
1135 func_fatal_error
"you cannot specify \`-o' more than once"
1140 -pie |
-fpie |
-fPIE)
1141 pie_flag
="$pie_flag $arg"
1145 -shared |
-static |
-prefer-pic |
-prefer-non-pic)
1156 arg_mode
=arg
# the next one goes into the "base_compile" arg list
1157 continue # The current "srcfile" will either be retained or
1158 ;; # replaced later. I would guess that would be a bug.
1161 func_stripname
'-Wc,' '' "$arg"
1162 args
=$func_stripname_result
1164 save_ifs
="$IFS"; IFS
=','
1165 for arg
in $args; do
1167 func_quote_for_eval
"$arg"
1168 lastarg
="$lastarg $func_quote_for_eval_result"
1171 func_stripname
' ' '' "$lastarg"
1172 lastarg
=$func_stripname_result
1174 # Add the arguments to base_compile.
1175 base_compile
="$base_compile $lastarg"
1180 # Accept the current argument as the source file.
1181 # The previous "srcfile" becomes the current argument.
1188 esac # case $arg_mode
1190 # Aesthetically quote the previous argument.
1191 func_quote_for_eval
"$lastarg"
1192 base_compile
="$base_compile $func_quote_for_eval_result"
1197 func_fatal_error
"you must specify an argument for -Xcompile"
1200 func_fatal_error
"you must specify a target with \`-o'"
1203 # Get the name of the library object.
1204 test -z "$libobj" && {
1205 func_basename
"$srcfile"
1206 libobj
="$func_basename_result"
1211 # Recognize several different file suffixes.
1212 # If the user specifies -o file.o, it is replaced with file.lo
1215 *.ada |
*.adb |
*.ads |
*.asm | \
1216 *.c
++ |
*.cc |
*.ii |
*.class |
*.cpp |
*.cxx | \
1217 *.
[fF
][09]? |
*.
for |
*.java |
*.obj |
*.sx
)
1218 func_xform
"$libobj"
1219 libobj
=$func_xform_result
1224 *.lo
) func_lo2o
"$libobj"; obj
=$func_lo2o_result ;;
1226 func_fatal_error
"cannot determine name of library object from \`$libobj'"
1230 func_infer_tag
$base_compile
1232 for arg
in $later; do
1235 test "$build_libtool_libs" != yes && \
1236 func_fatal_configuration
"can not build a shared library"
1242 build_libtool_libs
=no
1259 func_quote_for_eval
"$libobj"
1260 test "X$libobj" != "X$func_quote_for_eval_result" \
1261 && $ECHO "X$libobj" |
$GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
1262 && func_warning
"libobj name \`$libobj' may not contain shell special characters."
1263 func_dirname_and_basename
"$obj" "/" ""
1264 objname
="$func_basename_result"
1265 xdir
="$func_dirname_result"
1266 lobj
=${xdir}$objdir/$objname
1268 test -z "$base_compile" && \
1269 func_fatal_help
"you must specify a compilation command"
1271 # Delete any leftover library objects.
1272 if test "$build_old_libs" = yes; then
1273 removelist
="$obj $lobj $libobj ${libobj}T"
1275 removelist
="$lobj $libobj ${libobj}T"
1278 # On Cygwin there's no "real" PIC flag so we must build both object types
1280 cygwin
* | mingw
* | pw32
* | os2
* | cegcc
*)
1284 if test "$pic_mode" = no
&& test "$deplibs_check_method" != pass_all
; then
1285 # non-PIC code in shared libraries is not supported
1289 # Calculate the filename of the output object if compiler does
1290 # not support -o with -c
1291 if test "$compiler_c_o" = no
; then
1292 output_obj
=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.
${objext}
1293 lockfile
="$output_obj.lock"
1300 # Lock this critical section if it is needed
1301 # We use this script file to make the link, it avoids creating a new file
1302 if test "$need_locks" = yes; then
1303 until $opt_dry_run ||
ln "$progpath" "$lockfile" 2>/dev
/null
; do
1304 func_echo
"Waiting for $lockfile to be removed"
1307 elif test "$need_locks" = warn
; then
1308 if test -f "$lockfile"; then
1310 *** ERROR, $lockfile exists and contains:
1311 `cat $lockfile 2>/dev/null`
1313 This indicates that another process is trying to use the same
1314 temporary object file, and libtool could not work around it because
1315 your compiler does not support \`-c' and \`-o' together. If you
1316 repeat this compilation, it may succeed, by chance, but you had better
1317 avoid parallel builds (make -j) in this platform, or get a better
1320 $opt_dry_run ||
$RM $removelist
1323 removelist
="$removelist $output_obj"
1324 $ECHO "$srcfile" > "$lockfile"
1327 $opt_dry_run ||
$RM $removelist
1328 removelist
="$removelist $lockfile"
1329 trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
1331 if test -n "$fix_srcfile_path"; then
1332 eval srcfile
=\"$fix_srcfile_path\"
1334 func_quote_for_eval
"$srcfile"
1335 qsrcfile
=$func_quote_for_eval_result
1337 # Only build a PIC object if we are building libtool libraries.
1338 if test "$build_libtool_libs" = yes; then
1339 # Without this assignment, base_compile gets emptied.
1340 fbsd_hideous_sh_bug
=$base_compile
1342 if test "$pic_mode" != no
; then
1343 command="$base_compile $qsrcfile $pic_flag"
1345 # Don't build PIC code
1346 command="$base_compile $qsrcfile"
1349 func_mkdir_p
"$xdir$objdir"
1351 if test -z "$output_obj"; then
1352 # Place PIC objects in $objdir
1353 command="$command -o $lobj"
1356 func_show_eval_locale
"$command" \
1357 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
1359 if test "$need_locks" = warn
&&
1360 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
1362 *** ERROR, $lockfile contains:
1363 `cat $lockfile 2>/dev/null`
1365 but it should contain:
1368 This indicates that another process is trying to use the same
1369 temporary object file, and libtool could not work around it because
1370 your compiler does not support \`-c' and \`-o' together. If you
1371 repeat this compilation, it may succeed, by chance, but you had better
1372 avoid parallel builds (make -j) in this platform, or get a better
1375 $opt_dry_run ||
$RM $removelist
1379 # Just move the object if needed, then go on to compile the next one
1380 if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
1381 func_show_eval
'$MV "$output_obj" "$lobj"' \
1382 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
1385 # Allow error messages only from the first compilation.
1386 if test "$suppress_opt" = yes; then
1387 suppress_output
=' >/dev/null 2>&1'
1391 # Only build a position-dependent object if we build old libraries.
1392 if test "$build_old_libs" = yes; then
1393 if test "$pic_mode" != yes; then
1394 # Don't build PIC code
1395 command="$base_compile $qsrcfile$pie_flag"
1397 command="$base_compile $qsrcfile $pic_flag"
1399 if test "$compiler_c_o" = yes; then
1400 command="$command -o $obj"
1403 # Suppress compiler output if we already did a PIC compilation.
1404 command="$command$suppress_output"
1405 func_show_eval_locale
"$command" \
1406 '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
1408 if test "$need_locks" = warn
&&
1409 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
1411 *** ERROR, $lockfile contains:
1412 `cat $lockfile 2>/dev/null`
1414 but it should contain:
1417 This indicates that another process is trying to use the same
1418 temporary object file, and libtool could not work around it because
1419 your compiler does not support \`-c' and \`-o' together. If you
1420 repeat this compilation, it may succeed, by chance, but you had better
1421 avoid parallel builds (make -j) in this platform, or get a better
1424 $opt_dry_run ||
$RM $removelist
1428 # Just move the object if needed
1429 if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
1430 func_show_eval
'$MV "$output_obj" "$obj"' \
1431 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
1436 func_write_libtool_object
"$libobj" "$objdir/$objname" "$objname"
1438 # Unlock the critical section if it was locked
1439 if test "$need_locks" != no
; then
1440 removelist
=$lockfile
1449 test "$mode" = compile
&& func_mode_compile
${1+"$@"}
1454 # We need to display help for each of the modes.
1457 # Generic help is extracted from the usage comments
1458 # at the start of this file.
1464 "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
1466 Remove files from the build directory.
1468 RM is the name of the program to use to delete files associated with each FILE
1469 (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
1472 If FILE is a libtool library, object or program, all the files associated
1473 with it are deleted. Otherwise, only FILE itself is deleted using RM."
1478 "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
1480 Compile a source file into a libtool library object.
1482 This mode accepts the following additional options:
1484 -o OUTPUT-FILE set the output file name to OUTPUT-FILE
1485 -no-suppress do not suppress compiler output for multiple passes
1486 -prefer-pic try to building PIC objects only
1487 -prefer-non-pic try to building non-PIC objects only
1488 -shared do not build a \`.o' file suitable for static linking
1489 -static only build a \`.o' file suitable for static linking
1491 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
1492 from the given SOURCEFILE.
1494 The output file name is determined by removing the directory component from
1495 SOURCEFILE, then substituting the C source code suffix \`.c' with the
1496 library object suffix, \`.lo'."
1501 "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
1503 Automatically set library path, then run a program.
1505 This mode accepts the following additional options:
1507 -dlopen FILE add the directory containing FILE to the library path
1509 This mode sets the library path environment variable according to \`-dlopen'
1512 If any of the ARGS are libtool executable wrappers, then they are translated
1513 into their corresponding uninstalled binary, and any of their required library
1514 directories are added to the library path.
1516 Then, COMMAND is executed, with ARGS as arguments."
1521 "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
1523 Complete the installation of libtool libraries.
1525 Each LIBDIR is a directory that contains libtool libraries.
1527 The commands that this mode executes may require superuser privileges. Use
1528 the \`--dry-run' option if you just want to see what would be executed."
1533 "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
1535 Install executables or libraries.
1537 INSTALL-COMMAND is the installation command. The first component should be
1538 either the \`install' or \`cp' program.
1540 The following components of INSTALL-COMMAND are treated specially:
1542 -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
1544 The rest of the components are interpreted as arguments to that command (only
1545 BSD-compatible install options are recognized)."
1550 "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
1552 Link object files or libraries together to form another library, or to
1553 create an executable program.
1555 LINK-COMMAND is a command using the C compiler that you would use to create
1556 a program from several object files.
1558 The following components of LINK-COMMAND are treated specially:
1560 -all-static do not do any dynamic linking at all
1561 -avoid-version do not add a version suffix if possible
1562 -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
1563 -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
1564 -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
1565 -export-symbols SYMFILE
1566 try to export only the symbols listed in SYMFILE
1567 -export-symbols-regex REGEX
1568 try to export only the symbols matching REGEX
1569 -LLIBDIR search LIBDIR for required installed libraries
1570 -lNAME OUTPUT-FILE requires the installed library libNAME
1571 -module build a library that can dlopened
1572 -no-fast-install disable the fast-install mode
1573 -no-install link a not-installable executable
1574 -no-undefined declare that a library does not refer to external symbols
1575 -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
1576 -objectlist FILE Use a list of object files found in FILE to specify objects
1577 -precious-files-regex REGEX
1578 don't remove output files matching REGEX
1579 -release RELEASE specify package release information
1580 -rpath LIBDIR the created library will eventually be installed in LIBDIR
1581 -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
1582 -shared only do dynamic linking of libtool libraries
1583 -shrext SUFFIX override the standard shared library file extension
1584 -static do not do any dynamic linking of uninstalled libtool libraries
1585 -static-libtool-libs
1586 do not do any dynamic linking of libtool libraries
1587 -version-info CURRENT[:REVISION[:AGE]]
1588 specify library version info [each variable defaults to 0]
1589 -weak LIBNAME declare that the target provides the LIBNAME interface
1591 All other options (arguments beginning with \`-') are ignored.
1593 Every other argument is treated as a filename. Files ending in \`.la' are
1594 treated as uninstalled libtool libraries, other files are standard or library
1597 If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
1598 only library objects (\`.lo' files) may be specified, and \`-rpath' is
1599 required, except when creating a convenience library.
1601 If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
1602 using \`ar' and \`ranlib', or on Windows using \`lib'.
1604 If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
1605 is created, otherwise an executable program is created."
1610 "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
1612 Remove libraries from an installation directory.
1614 RM is the name of the program to use to delete files associated with each FILE
1615 (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
1618 If FILE is a libtool library, all the files associated with it are deleted.
1619 Otherwise, only FILE itself is deleted using RM."
1623 func_fatal_help
"invalid operation mode \`$mode'"
1628 $ECHO "Try \`$progname --help' for more information about other modes."
1633 # Now that we've collected a possible --mode arg, show help if necessary
1634 $opt_help && func_mode_help
1637 # func_mode_execute arg...
1638 func_mode_execute
()
1641 # The first argument is the command name.
1644 func_fatal_help
"you must specify a COMMAND"
1646 # Handle -dlopen flags immediately.
1647 for file in $execute_dlfiles; do
1649 || func_fatal_help
"\`$file' is not a file"
1654 # Check to see that this really is a libtool archive.
1655 func_lalib_unsafe_p
"$file" \
1656 || func_fatal_help
"\`$lib' is not a valid libtool archive"
1658 # Read the libtool library.
1663 # Skip this library if it cannot be dlopened.
1664 if test -z "$dlname"; then
1665 # Warn if it was a shared library.
1666 test -n "$library_names" && \
1667 func_warning
"\`$file' was not linked with \`-export-dynamic'"
1671 func_dirname
"$file" "" "."
1672 dir
="$func_dirname_result"
1674 if test -f "$dir/$objdir/$dlname"; then
1677 if test ! -f "$dir/$dlname"; then
1678 func_fatal_error
"cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
1684 # Just add the directory containing the .lo file.
1685 func_dirname
"$file" "" "."
1686 dir
="$func_dirname_result"
1690 func_warning
"\`-dlopen' is ignored for non-libtool libraries and objects"
1695 # Get the absolute pathname.
1696 absdir
=`cd "$dir" && pwd`
1697 test -n "$absdir" && dir
="$absdir"
1699 # Now add the directory to shlibpath_var.
1700 if eval "test -z \"\$$shlibpath_var\""; then
1701 eval "$shlibpath_var=\"\$dir\""
1703 eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
1707 # This variable tells wrapper scripts just to set shlibpath_var
1708 # rather than running their programs.
1709 libtool_execute_magic
="$magic"
1711 # Check if any of the arguments is a wrapper script.
1718 # Do a test to see if this is really a libtool program.
1719 if func_ltwrapper_script_p
"$file"; then
1721 # Transform arg to wrapped name.
1722 file="$progdir/$program"
1723 elif func_ltwrapper_executable_p
"$file"; then
1724 func_ltwrapper_scriptname
"$file"
1725 func_source
"$func_ltwrapper_scriptname_result"
1726 # Transform arg to wrapped name.
1727 file="$progdir/$program"
1731 # Quote arguments (to preserve shell metacharacters).
1732 func_quote_for_eval
"$file"
1733 args
="$args $func_quote_for_eval_result"
1736 if test "X$opt_dry_run" = Xfalse
; then
1737 if test -n "$shlibpath_var"; then
1738 # Export the shlibpath_var.
1739 eval "export $shlibpath_var"
1742 # Restore saved environment variables
1743 for lt_var
in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
1745 eval "if test \"\${save_$lt_var+set}\" = set; then
1746 $lt_var=\$save_$lt_var; export $lt_var
1752 # Now prepare to actually exec the command.
1753 exec_cmd
="\$cmd$args"
1755 # Display what would be done.
1756 if test -n "$shlibpath_var"; then
1757 eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
1758 $ECHO "export $shlibpath_var"
1765 test "$mode" = execute
&& func_mode_execute
${1+"$@"}
1768 # func_mode_finish arg...
1775 if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
1778 libdirs
="$libdirs $dir"
1781 for libdir
in $libdirs; do
1782 if test -n "$finish_cmds"; then
1783 # Do each command in the finish commands.
1784 func_execute_cmds
"$finish_cmds" 'admincmds="$admincmds
1787 if test -n "$finish_eval"; then
1788 # Do the single finish_eval.
1789 eval cmds
=\"$finish_eval\"
1790 $opt_dry_run ||
eval "$cmds" || admincmds
="$admincmds
1796 # Exit here if they wanted silent mode.
1797 $opt_silent && exit $EXIT_SUCCESS
1799 $ECHO "X----------------------------------------------------------------------" |
$Xsed
1800 $ECHO "Libraries have been installed in:"
1801 for libdir
in $libdirs; do
1805 $ECHO "If you ever happen to want to link against installed libraries"
1806 $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
1807 $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
1808 $ECHO "flag during linking and do at least one of the following:"
1809 if test -n "$shlibpath_var"; then
1810 $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
1811 $ECHO " during execution"
1813 if test -n "$runpath_var"; then
1814 $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
1815 $ECHO " during linking"
1817 if test -n "$hardcode_libdir_flag_spec"; then
1819 eval flag
=\"$hardcode_libdir_flag_spec\"
1821 $ECHO " - use the \`$flag' linker flag"
1823 if test -n "$admincmds"; then
1824 $ECHO " - have your system administrator run these commands:$admincmds"
1826 if test -f /etc
/ld.so.conf
; then
1827 $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
1831 $ECHO "See any operating system documentation about shared libraries for"
1833 solaris2.
[6789]|solaris2.1
[0-9])
1834 $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
1838 $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
1841 $ECHO "X----------------------------------------------------------------------" |
$Xsed
1845 test "$mode" = finish
&& func_mode_finish
${1+"$@"}
1848 # func_mode_install arg...
1849 func_mode_install
()
1852 # There may be an optional sh(1) argument at the beginning of
1853 # install_prog (especially on Windows NT).
1854 if test "$nonopt" = "$SHELL" ||
test "$nonopt" = /bin
/sh ||
1855 # Allow the use of GNU shtool's install command.
1856 $ECHO "X$nonopt" |
$GREP shtool
>/dev
/null
; then
1857 # Aesthetically quote it.
1858 func_quote_for_eval
"$nonopt"
1859 install_prog
="$func_quote_for_eval_result "
1867 # The real first argument should be the name of the installation program.
1868 # Aesthetically quote it.
1869 func_quote_for_eval
"$arg"
1870 install_prog
="$install_prog$func_quote_for_eval_result"
1872 # We need to accept at least all the BSD install flags.
1882 if test -n "$dest"; then
1883 files
="$files $dest"
1891 case " $install_prog " in
1906 # If the previous option needed an argument, then skip it.
1907 if test -n "$prev"; then
1916 # Aesthetically quote the argument.
1917 func_quote_for_eval
"$arg"
1918 install_prog
="$install_prog $func_quote_for_eval_result"
1921 test -z "$install_prog" && \
1922 func_fatal_help
"you must specify an install program"
1924 test -n "$prev" && \
1925 func_fatal_help
"the \`$prev' option requires an argument"
1927 if test -z "$files"; then
1928 if test -z "$dest"; then
1929 func_fatal_help
"no file or destination specified"
1931 func_fatal_help
"you must specify a destination"
1935 # Strip any trailing slash from the destination.
1936 func_stripname
'' '/' "$dest"
1937 dest
=$func_stripname_result
1939 # Check to see that the destination is a directory.
1940 test -d "$dest" && isdir
=yes
1941 if test "$isdir" = yes; then
1945 func_dirname_and_basename
"$dest" "" "."
1946 destdir
="$func_dirname_result"
1947 destname
="$func_basename_result"
1949 # Not a directory, so check to see that there is only one file specified.
1950 set dummy
$files; shift
1951 test "$#" -gt 1 && \
1952 func_fatal_help
"\`$dest' is not a directory"
1955 [\\/]* |
[A-Za-z
]:[\\/]*) ;;
1957 for file in $files; do
1961 func_fatal_help
"\`$destdir' must be an absolute directory name"
1968 # This variable tells wrapper scripts just to set variables rather
1969 # than running their programs.
1970 libtool_install_magic
="$magic"
1975 for file in $files; do
1977 # Do each installation.
1980 # Do the static libraries later.
1981 staticlibs
="$staticlibs $file"
1985 # Check to see that this really is a libtool archive.
1986 func_lalib_unsafe_p
"$file" \
1987 || func_fatal_help
"\`$file' is not a valid libtool archive"
1994 # Add the libdir to current_libdirs if it is the destination.
1995 if test "X$destdir" = "X$libdir"; then
1996 case "$current_libdirs " in
1998 *) current_libdirs
="$current_libdirs $libdir" ;;
2001 # Note the libdir as a future libdir.
2002 case "$future_libdirs " in
2004 *) future_libdirs
="$future_libdirs $libdir" ;;
2008 func_dirname
"$file" "/" ""
2009 dir
="$func_dirname_result"
2012 if test -n "$relink_command"; then
2013 # Determine the prefix the user has applied to our future dir.
2014 inst_prefix_dir
=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
2016 # Don't allow the user to place us outside of our expected
2017 # location b/c this prevents finding dependent libraries that
2018 # are installed to the same prefix.
2019 # At present, this check doesn't affect windows .dll's that
2020 # are installed into $libdir/../bin (currently, that works fine)
2021 # but it's something to keep an eye on.
2022 test "$inst_prefix_dir" = "$destdir" && \
2023 func_fatal_error
"error: cannot install \`$file' to a directory not ending in $libdir"
2025 if test -n "$inst_prefix_dir"; then
2026 # Stick the inst_prefix_dir data into the link command.
2027 relink_command
=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
2029 relink_command
=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
2032 func_warning
"relinking \`$file'"
2033 func_show_eval
"$relink_command" \
2034 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
2037 # See the names of the shared library.
2038 set dummy
$library_names; shift
2039 if test -n "$1"; then
2044 test -n "$relink_command" && srcname
="$realname"T
2046 # Install the shared library and build the symlinks.
2047 func_show_eval
"$install_prog $dir/$srcname $destdir/$realname" \
2051 cygwin
* | mingw
* | pw32
* | cegcc
*)
2059 if test -n "$tstripme" && test -n "$striplib"; then
2060 func_show_eval
"$striplib $destdir/$realname" 'exit $?'
2063 if test "$#" -gt 0; then
2064 # Delete the old symlinks, and create new ones.
2065 # Try `ln -sf' first, because the `ln' binary might depend on
2066 # the symlink we replace! Solaris /bin/ln does not understand -f,
2067 # so we also need to try rm && ln -s.
2070 test "$linkname" != "$realname" \
2071 && func_show_eval
"(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
2075 # Do each command in the postinstall commands.
2076 lib
="$destdir/$realname"
2077 func_execute_cmds
"$postinstall_cmds" 'exit $?'
2080 # Install the pseudo-library for information purposes.
2081 func_basename
"$file"
2082 name
="$func_basename_result"
2083 instname
="$dir/$name"i
2084 func_show_eval
"$install_prog $instname $destdir/$name" 'exit $?'
2086 # Maybe install the static library, too.
2087 test -n "$old_library" && staticlibs
="$staticlibs $dir/$old_library"
2091 # Install (i.e. copy) a libtool object.
2093 # Figure out destination file name, if it wasn't already specified.
2094 if test -n "$destname"; then
2095 destfile
="$destdir/$destname"
2097 func_basename
"$file"
2098 destfile
="$func_basename_result"
2099 destfile
="$destdir/$destfile"
2102 # Deduce the name of the destination old-style object file.
2105 func_lo2o
"$destfile"
2106 staticdest
=$func_lo2o_result
2109 staticdest
="$destfile"
2113 func_fatal_help
"cannot copy a libtool object to \`$destfile'"
2117 # Install the libtool object if requested.
2118 test -n "$destfile" && \
2119 func_show_eval
"$install_prog $file $destfile" 'exit $?'
2121 # Install the old object if enabled.
2122 if test "$build_old_libs" = yes; then
2123 # Deduce the name of the old-style object file.
2125 staticobj
=$func_lo2o_result
2126 func_show_eval
"$install_prog \$staticobj \$staticdest" 'exit $?'
2132 # Figure out destination file name, if it wasn't already specified.
2133 if test -n "$destname"; then
2134 destfile
="$destdir/$destname"
2136 func_basename
"$file"
2137 destfile
="$func_basename_result"
2138 destfile
="$destdir/$destfile"
2141 # If the file is missing, and there is a .exe on the end, strip it
2142 # because it is most likely a libtool script we actually want to
2147 if test ! -f "$file"; then
2148 func_stripname
'' '.exe' "$file"
2149 file=$func_stripname_result
2155 # Do a test to see if this is really a libtool program.
2158 if func_ltwrapper_executable_p
"$file"; then
2159 func_ltwrapper_scriptname
"$file"
2160 wrapper
=$func_ltwrapper_scriptname_result
2162 func_stripname
'' '.exe' "$file"
2163 wrapper
=$func_stripname_result
2170 if func_ltwrapper_script_p
"$wrapper"; then
2174 func_source
"$wrapper"
2176 # Check the variables that should have been set.
2177 test -z "$generated_by_libtool_version" && \
2178 func_fatal_error
"invalid libtool wrapper script \`$wrapper'"
2181 for lib
in $notinst_deplibs; do
2182 # Check to see that each library is installed.
2184 if test -f "$lib"; then
2187 libfile
="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
2188 if test -n "$libdir" && test ! -f "$libfile"; then
2189 func_warning
"\`$lib' has not been installed in \`$libdir'"
2195 func_source
"$wrapper"
2198 if test "$fast_install" = no
&& test -n "$relink_command"; then
2200 if test "$finalize" = yes; then
2201 tmpdir
=`func_mktempdir`
2202 func_basename
"$file$stripped_ext"
2203 file="$func_basename_result"
2204 outputname
="$tmpdir/$file"
2205 # Replace the output file specification.
2206 relink_command
=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
2209 func_quote_for_expand
"$relink_command"
2210 eval "func_echo $func_quote_for_expand_result"
2212 if eval "$relink_command"; then :
2214 func_error
"error: relink \`$file' with the above command before installing it"
2215 $opt_dry_run ||
${RM}r
"$tmpdir"
2220 func_warning
"cannot relink \`$file'"
2224 # Install the binary that we compiled earlier.
2225 file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
2229 # remove .exe since cygwin /usr/bin/install will append another
2231 case $install_prog,$host in
2232 */usr
/bin
/install*,*cygwin
*)
2233 case $file:$destfile in
2238 destfile
=$destfile.exe
2241 func_stripname
'' '.exe' "$destfile"
2242 destfile
=$func_stripname_result
2247 func_show_eval
"$install_prog\$stripme \$file \$destfile" 'exit $?'
2248 $opt_dry_run ||
if test -n "$outputname"; then
2255 for file in $staticlibs; do
2256 func_basename
"$file"
2257 name
="$func_basename_result"
2259 # Set up the ranlib parameters.
2260 oldlib
="$destdir/$name"
2262 func_show_eval
"$install_prog \$file \$oldlib" 'exit $?'
2264 if test -n "$stripme" && test -n "$old_striplib"; then
2265 func_show_eval
"$old_striplib $oldlib" 'exit $?'
2268 # Do each command in the postinstall commands.
2269 func_execute_cmds
"$old_postinstall_cmds" 'exit $?'
2272 test -n "$future_libdirs" && \
2273 func_warning
"remember to run \`$progname --finish$future_libdirs'"
2275 if test -n "$current_libdirs"; then
2276 # Maybe just do a dry run.
2277 $opt_dry_run && current_libdirs
=" -n$current_libdirs"
2278 exec_cmd
='$SHELL $progpath $preserve_args --finish$current_libdirs'
2284 test "$mode" = install && func_mode_install
${1+"$@"}
2287 # func_generate_dlsyms outputname originator pic_p
2288 # Extract symbols from dlprefiles and create ${outputname}S.o with
2289 # a dlpreopen symbol table.
2290 func_generate_dlsyms
()
2296 my_prefix
=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
2299 if test -n "$dlfiles$dlprefiles" ||
test "$dlself" != no
; then
2300 if test -n "$NM" && test -n "$global_symbol_pipe"; then
2301 my_dlsyms
="${my_outputname}S.c"
2303 func_error
"not configured to extract global symbols from dlpreopened files"
2307 if test -n "$my_dlsyms"; then
2311 # Discover the nlist of each of the dlfiles.
2312 nlist
="$output_objdir/${my_outputname}.nm"
2314 func_show_eval
"$RM $nlist ${nlist}S ${nlist}T"
2316 # Parse the name list into a source file.
2317 func_verbose
"creating $output_objdir/$my_dlsyms"
2319 $opt_dry_run ||
$ECHO > "$output_objdir/$my_dlsyms" "\
2320 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
2321 /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
2327 /* External symbol declarations for the compiler. */\
2330 if test "$dlself" = yes; then
2331 func_verbose
"generating symbol list for \`$output'"
2333 $opt_dry_run ||
echo ': @PROGRAM@ ' > "$nlist"
2335 # Add our own program objects to the symbol list.
2336 progfiles
=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
2337 for progfile
in $progfiles; do
2338 func_verbose
"extracting global C symbols from \`$progfile'"
2339 $opt_dry_run ||
eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
2342 if test -n "$exclude_expsyms"; then
2344 eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
2345 eval '$MV "$nlist"T "$nlist"'
2349 if test -n "$export_symbols_regex"; then
2351 eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
2352 eval '$MV "$nlist"T "$nlist"'
2356 # Prepare the list of exported symbols
2357 if test -z "$export_symbols"; then
2358 export_symbols
="$output_objdir/$outputname.exp"
2361 eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
2363 *cygwin
* |
*mingw
* |
*cegcc
* )
2364 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
2365 eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
2371 eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
2372 eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
2373 eval '$MV "$nlist"T "$nlist"'
2375 *cygwin |
*mingw
* |
*cegcc
* )
2376 eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
2377 eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
2384 for dlprefile
in $dlprefiles; do
2385 func_verbose
"extracting global C symbols from \`$dlprefile'"
2386 func_basename
"$dlprefile"
2387 name
="$func_basename_result"
2389 eval '$ECHO ": $name " >> "$nlist"'
2390 eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
2395 # Make sure we have at least an empty file.
2396 test -f "$nlist" ||
: > "$nlist"
2398 if test -n "$exclude_expsyms"; then
2399 $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
2400 $MV "$nlist"T
"$nlist"
2403 # Try sorting and uniquifying the output.
2404 if $GREP -v "^: " < "$nlist" |
2405 if sort -k 3 </dev
/null
>/dev
/null
2>&1; then
2410 uniq > "$nlist"S
; then
2413 $GREP -v "^: " < "$nlist" > "$nlist"S
2416 if test -f "$nlist"S
; then
2417 eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
2419 $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
2422 $ECHO >> "$output_objdir/$my_dlsyms" "\
2424 /* The mapping between symbol names and symbols. */
2431 *cygwin
* |
*mingw
* |
*cegcc
* )
2432 $ECHO >> "$output_objdir/$my_dlsyms" "\
2433 /* DATA imports from DLLs on WIN32 con't be const, because
2434 runtime relocations are performed -- see ld's documentation
2435 on pseudo-relocs. */"
2438 echo >> "$output_objdir/$my_dlsyms" "\
2439 /* This system does not cope well with relocations in const data */"
2442 lt_dlsym_const
=const
;;
2445 $ECHO >> "$output_objdir/$my_dlsyms" "\
2446 extern $lt_dlsym_const lt_dlsymlist
2447 lt_${my_prefix}_LTX_preloaded_symbols[];
2448 $lt_dlsym_const lt_dlsymlist
2449 lt_${my_prefix}_LTX_preloaded_symbols[] =
2451 { \"$my_originator\", (void *) 0 },"
2453 case $need_lib_prefix in
2455 eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
2458 eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
2461 $ECHO >> "$output_objdir/$my_dlsyms" "\
2465 /* This works around a problem in FreeBSD linker */
2466 #ifdef FREEBSD_WORKAROUND
2467 static const void *lt_preloaded_setup() {
2468 return lt_${my_prefix}_LTX_preloaded_symbols;
2478 pic_flag_for_symtable
=
2479 case "$compile_command " in
2483 # compiling the symbol table file with pic_flag works around
2484 # a FreeBSD bug that causes programs to crash when -lm is
2485 # linked before any other PIC object. But we must not use
2486 # pic_flag when linking with -static. The problem exists in
2487 # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
2488 *-*-freebsd2*|
*-*-freebsd3.0
*|
*-*-freebsdelf3.0
*)
2489 pic_flag_for_symtable
=" $pic_flag -DFREEBSD_WORKAROUND" ;;
2491 pic_flag_for_symtable
=" $pic_flag" ;;
2493 if test "X$my_pic_p" != Xno
; then
2494 pic_flag_for_symtable
=" $pic_flag"
2501 for arg
in $LTCFLAGS; do
2503 -pie |
-fpie |
-fPIE) ;;
2504 *) symtab_cflags
="$symtab_cflags $arg" ;;
2508 # Now compile the dynamic symbol file.
2509 func_show_eval
'(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
2511 # Clean up the generated files.
2512 func_show_eval
'$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
2514 # Transform the symbol file into the correct name.
2515 symfileobj
="$output_objdir/${my_outputname}S.$objext"
2517 *cygwin
* |
*mingw
* |
*cegcc
* )
2518 if test -f "$output_objdir/$my_outputname.def"; then
2519 compile_command
=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
2520 finalize_command
=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
2522 compile_command
=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2523 finalize_command
=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2527 compile_command
=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2528 finalize_command
=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
2533 func_fatal_error
"unknown suffix for \`$my_dlsyms'"
2537 # We keep going just in case the user didn't refer to
2538 # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
2539 # really was required.
2541 # Nullify the symbol file.
2542 compile_command
=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
2543 finalize_command
=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
2547 # func_win32_libid arg
2548 # return the library type of file 'arg'
2550 # Need a lot of goo to handle *both* DLLs and import libs
2551 # Has to be a shell function in order to 'eat' the argument
2552 # that is supplied when $file_magic_command is called.
2556 win32_libid_type
="unknown"
2557 win32_fileres
=`file -L $1 2>/dev/null`
2558 case $win32_fileres in
2559 *ar\ archive\ import\ library
*) # definitely import
2560 win32_libid_type
="x86 archive import"
2562 *ar\ archive
*) # could be an import, or static
2563 if eval $OBJDUMP -f $1 |
$SED -e '10q' 2>/dev
/null |
2564 $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev
/null
; then
2565 win32_nmres
=`eval $NM -f posix -A $1 |
2574 case $win32_nmres in
2575 import
*) win32_libid_type
="x86 archive import";;
2576 *) win32_libid_type
="x86 archive static";;
2581 win32_libid_type
="x86 DLL"
2583 *executable
*) # but shell scripts are "executable" too...
2584 case $win32_fileres in
2585 *MS\ Windows\ PE\ Intel
*)
2586 win32_libid_type
="x86 DLL"
2591 $ECHO "$win32_libid_type"
2596 # func_extract_an_archive dir oldlib
2597 func_extract_an_archive
()
2600 f_ex_an_ar_dir
="$1"; shift
2601 f_ex_an_ar_oldlib
="$1"
2602 func_show_eval
"(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
2603 if ($AR t
"$f_ex_an_ar_oldlib" |
sort |
sort -uc >/dev
/null
2>&1); then
2606 func_fatal_error
"object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
2611 # func_extract_archives gentop oldlib ...
2612 func_extract_archives
()
2615 my_gentop
="$1"; shift
2616 my_oldlibs
=${1+"$@"}
2622 for my_xlib
in $my_oldlibs; do
2623 # Extract the objects.
2625 [\\/]* |
[A-Za-z
]:[\\/]*) my_xabs
="$my_xlib" ;;
2626 *) my_xabs
=`pwd`"/$my_xlib" ;;
2628 func_basename
"$my_xlib"
2629 my_xlib
="$func_basename_result"
2632 case " $extracted_archives " in
2634 func_arith
$extracted_serial + 1
2635 extracted_serial
=$func_arith_result
2636 my_xlib_u
=lt
$extracted_serial-$my_xlib ;;
2640 extracted_archives
="$extracted_archives $my_xlib_u"
2641 my_xdir
="$my_gentop/$my_xlib_u"
2643 func_mkdir_p
"$my_xdir"
2647 func_verbose
"Extracting $my_xabs"
2648 # Do not bother doing anything if just a dry run
2650 darwin_orig_dir
=`pwd`
2651 cd $my_xdir ||
exit $?
2652 darwin_archive
=$my_xabs
2654 darwin_base_archive
=`basename "$darwin_archive"`
2655 darwin_arches
=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
2656 if test -n "$darwin_arches"; then
2657 darwin_arches
=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
2659 func_verbose
"$darwin_base_archive has multiple architectures $darwin_arches"
2660 for darwin_arch
in $darwin_arches ; do
2661 func_mkdir_p
"unfat-$$/${darwin_base_archive}-${darwin_arch}"
2662 $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
2663 cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
2664 func_extract_an_archive
"`pwd`" "${darwin_base_archive}"
2666 $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
2667 done # $darwin_arches
2668 ## Okay now we've a bunch of thin objects, gotta fatten them up :)
2669 darwin_filelist
=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
2672 for darwin_file
in $darwin_filelist; do
2673 darwin_files
=`find unfat-$$ -name $darwin_file -print | $NL2SP`
2674 $LIPO -create -output "$darwin_file" $darwin_files
2675 done # $darwin_filelist
2677 cd "$darwin_orig_dir"
2680 func_extract_an_archive
"$my_xdir" "$my_xabs"
2685 func_extract_an_archive
"$my_xdir" "$my_xabs"
2688 my_oldobjs
="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
2691 func_extract_archives_result
="$my_oldobjs"
2696 # func_emit_wrapper_part1 [arg=no]
2698 # Emit the first part of a libtool wrapper script on stdout.
2699 # For more information, see the description associated with
2700 # func_emit_wrapper(), below.
2701 func_emit_wrapper_part1
()
2703 func_emit_wrapper_part1_arg1
=no
2704 if test -n "$1" ; then
2705 func_emit_wrapper_part1_arg1
=$1
2711 # $output - temporary wrapper script for $objdir/$outputname
2712 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
2714 # The $output program cannot be directly executed until all the libtool
2715 # libraries that it depends on are installed.
2717 # This wrapper script should never be moved out of the build directory.
2718 # If it is, it will not operate correctly.
2720 # Sed substitution that helps us do robust quoting. It backslashifies
2721 # metacharacters that are still active within double-quoted strings.
2722 Xsed='${SED} -e 1s/^X//'
2723 sed_quote_subst='$sed_quote_subst'
2725 # Be Bourne compatible
2726 if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
2729 # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
2730 # is contrary to our usage. Disable this feature.
2731 alias -g '\${1+\"\$@\"}'='\"\$@\"'
2732 setopt NO_GLOB_SUBST
2734 case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
2736 BIN_SH=xpg4; export BIN_SH # for Tru64
2737 DUALCASE=1; export DUALCASE # for MKS sh
2739 # The HP-UX ksh and POSIX shell print the target directory to stdout
2741 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
2743 relink_command=\"$relink_command\"
2745 # This environment variable determines our operation mode.
2746 if test \"\$libtool_install_magic\" = \"$magic\"; then
2747 # install mode needs the following variables:
2748 generated_by_libtool_version='$macro_version'
2749 notinst_deplibs='$notinst_deplibs'
2751 # When we are sourced in execute mode, \$file and \$ECHO are already set.
2752 if test \"\$libtool_execute_magic\" != \"$magic\"; then
2755 # Make sure echo works.
2756 if test \"X\$1\" = X--no-reexec; then
2757 # Discard the --no-reexec flag, and continue.
2759 elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
2760 # Yippee, \$ECHO works!
2763 # Restart under the correct shell, and then maybe \$ECHO will work.
2764 exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
2770 # Find the directory that this script lives in.
2771 thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
2772 test \"x\$thisdir\" = \"x\$file\" && thisdir=.
2774 # Follow symbolic links until we get to the real thisdir.
2775 file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
2776 while test -n \"\$file\"; do
2777 destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
2779 # If there was a directory component, then change thisdir.
2780 if test \"x\$destdir\" != \"x\$file\"; then
2781 case \"\$destdir\" in
2782 [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
2783 *) thisdir=\"\$thisdir/\$destdir\" ;;
2787 file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
2788 file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
2792 # end: func_emit_wrapper_part1
2794 # func_emit_wrapper_part2 [arg=no]
2796 # Emit the second part of a libtool wrapper script on stdout.
2797 # For more information, see the description associated with
2798 # func_emit_wrapper(), below.
2799 func_emit_wrapper_part2
()
2801 func_emit_wrapper_part2_arg1
=no
2802 if test -n "$1" ; then
2803 func_emit_wrapper_part2_arg1
=$1
2808 # Usually 'no', except on cygwin/mingw when embedded into
2810 WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
2811 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
2812 # special case for '.'
2813 if test \"\$thisdir\" = \".\"; then
2816 # remove .libs from thisdir
2817 case \"\$thisdir\" in
2818 *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
2819 $objdir ) thisdir=. ;;
2823 # Try to get the absolute directory name.
2824 absdir=\`cd \"\$thisdir\" && pwd\`
2825 test -n \"\$absdir\" && thisdir=\"\$absdir\"
2828 if test "$fast_install" = yes; then
2830 program=lt-'$outputname'$exeext
2831 progdir=\"\$thisdir/$objdir\"
2833 if test ! -f \"\$progdir/\$program\" ||
2834 { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
2835 test \"X\$file\" != \"X\$progdir/\$program\"; }; then
2837 file=\"\$\$-\$program\"
2839 if test ! -d \"\$progdir\"; then
2840 $MKDIR \"\$progdir\"
2842 $RM \"\$progdir/\$file\"
2847 # relink executable if necessary
2848 if test -n \"\$relink_command\"; then
2849 if relink_command_output=\`eval \$relink_command 2>&1\`; then :
2851 $ECHO \"\$relink_command_output\" >&2
2852 $RM \"\$progdir/\$file\"
2857 $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
2858 { $RM \"\$progdir/\$program\";
2859 $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
2860 $RM \"\$progdir/\$file\"
2864 program='$outputname'
2865 progdir=\"\$thisdir/$objdir\"
2871 if test -f \"\$progdir/\$program\"; then"
2873 # Export our shlibpath_var if we have one.
2874 if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
2876 # Add our own library path to $shlibpath_var
2877 $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
2879 # Some systems cannot cope with colon-terminated $shlibpath_var
2880 # The second colon is a workaround for a bug in BeOS R4 sed
2881 $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
2883 export $shlibpath_var
2887 # fixup the dll searchpath if we need to.
2888 if test -n "$dllsearchpath"; then
2890 # Add the dll search path components to the executable PATH
2891 PATH=$dllsearchpath:\$PATH
2896 if test \"\$libtool_execute_magic\" != \"$magic\"; then
2897 # Run the actual program with our arguments.
2900 # Backslashes separate directories on plain windows
2901 *-*-mingw |
*-*-os2* |
*-cegcc*)
2903 exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
2909 exec \"\$progdir/\$program\" \${1+\"\$@\"}
2914 \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
2918 # The program doesn't exist.
2919 \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
2920 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
2921 $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
2927 # end: func_emit_wrapper_part2
2930 # func_emit_wrapper [arg=no]
2932 # Emit a libtool wrapper script on stdout.
2933 # Don't directly open a file because we may want to
2934 # incorporate the script contents within a cygwin/mingw
2935 # wrapper executable. Must ONLY be called from within
2936 # func_mode_link because it depends on a number of variables
2939 # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
2940 # variable will take. If 'yes', then the emitted script
2941 # will assume that the directory in which it is stored is
2942 # the $objdir directory. This is a cygwin/mingw-specific
2944 func_emit_wrapper
()
2946 func_emit_wrapper_arg1
=no
2947 if test -n "$1" ; then
2948 func_emit_wrapper_arg1
=$1
2951 # split this up so that func_emit_cwrapperexe_src
2952 # can call each part independently.
2953 func_emit_wrapper_part1
"${func_emit_wrapper_arg1}"
2954 func_emit_wrapper_part2
"${func_emit_wrapper_arg1}"
2958 # func_to_host_path arg
2960 # Convert paths to host format when used with build tools.
2961 # Intended for use with "native" mingw (where libtool itself
2962 # is running under the msys shell), or in the following cross-
2963 # build environments:
2965 # mingw (msys) mingw [e.g. native]
2968 # where wine is equipped with the `winepath' executable.
2969 # In the native mingw case, the (msys) shell automatically
2970 # converts paths for any non-msys applications it launches,
2971 # but that facility isn't available from inside the cwrapper.
2972 # Similar accommodations are necessary for $host mingw and
2973 # $build cygwin. Calling this function does no harm for other
2974 # $host/$build combinations not listed above.
2976 # ARG is the path (on $build) that should be converted to
2977 # the proper representation for $host. The result is stored
2978 # in $func_to_host_path_result.
2979 func_to_host_path
()
2981 func_to_host_path_result
="$1"
2982 if test -n "$1" ; then
2985 lt_sed_naive_backslashify
='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
2987 *mingw
* ) # actually, msys
2988 # awkward: cmd appends spaces to result
2989 lt_sed_strip_trailing_spaces
="s/[ ]*\$//"
2990 func_to_host_path_tmp1
=`( cmd //c echo "$1" |\
2991 $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
2992 func_to_host_path_result
=`echo "$func_to_host_path_tmp1" |\
2993 $SED -e "$lt_sed_naive_backslashify"`
2996 func_to_host_path_tmp1
=`cygpath -w "$1"`
2997 func_to_host_path_result
=`echo "$func_to_host_path_tmp1" |\
2998 $SED -e "$lt_sed_naive_backslashify"`
3001 # Unfortunately, winepath does not exit with a non-zero
3002 # error code, so we are forced to check the contents of
3003 # stdout. On the other hand, if the command is not
3004 # found, the shell will set an exit code of 127 and print
3005 # *an error message* to stdout. So we must check for both
3006 # error code of zero AND non-empty stdout, which explains
3007 # the odd construction:
3008 func_to_host_path_tmp1
=`winepath -w "$1" 2>/dev/null`
3009 if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
3010 func_to_host_path_result
=`echo "$func_to_host_path_tmp1" |\
3011 $SED -e "$lt_sed_naive_backslashify"`
3013 # Allow warning below.
3014 func_to_host_path_result
=""
3018 if test -z "$func_to_host_path_result" ; then
3019 func_error
"Could not determine host path corresponding to"
3021 func_error
"Continuing, but uninstalled executables may not work."
3023 func_to_host_path_result
="$1"
3029 # end: func_to_host_path
3031 # func_to_host_pathlist arg
3033 # Convert pathlists to host format when used with build tools.
3034 # See func_to_host_path(), above. This function supports the
3035 # following $build/$host combinations (but does no harm for
3036 # combinations not listed here):
3038 # mingw (msys) mingw [e.g. native]
3042 # Path separators are also converted from $build format to
3043 # $host format. If ARG begins or ends with a path separator
3044 # character, it is preserved (but converted to $host format)
3047 # ARG is a pathlist (on $build) that should be converted to
3048 # the proper representation on $host. The result is stored
3049 # in $func_to_host_pathlist_result.
3050 func_to_host_pathlist
()
3052 func_to_host_pathlist_result
="$1"
3053 if test -n "$1" ; then
3056 lt_sed_naive_backslashify
='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
3057 # Remove leading and trailing path separator characters from
3058 # ARG. msys behavior is inconsistent here, cygpath turns them
3059 # into '.;' and ';.', and winepath ignores them completely.
3060 func_to_host_pathlist_tmp2
="$1"
3061 # Once set for this call, this variable should not be
3062 # reassigned. It is used in tha fallback case.
3063 func_to_host_pathlist_tmp1
=`echo "$func_to_host_pathlist_tmp2" |\
3064 $SED -e 's|^:*||' -e 's|:*$||'`
3066 *mingw
* ) # Actually, msys.
3067 # Awkward: cmd appends spaces to result.
3068 lt_sed_strip_trailing_spaces
="s/[ ]*\$//"
3069 func_to_host_pathlist_tmp2
=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
3070 $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
3071 func_to_host_pathlist_result
=`echo "$func_to_host_pathlist_tmp2" |\
3072 $SED -e "$lt_sed_naive_backslashify"`
3075 func_to_host_pathlist_tmp2
=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
3076 func_to_host_pathlist_result
=`echo "$func_to_host_pathlist_tmp2" |\
3077 $SED -e "$lt_sed_naive_backslashify"`
3080 # unfortunately, winepath doesn't convert pathlists
3081 func_to_host_pathlist_result
=""
3082 func_to_host_pathlist_oldIFS
=$IFS
3084 for func_to_host_pathlist_f
in $func_to_host_pathlist_tmp1 ; do
3085 IFS
=$func_to_host_pathlist_oldIFS
3086 if test -n "$func_to_host_pathlist_f" ; then
3087 func_to_host_path
"$func_to_host_pathlist_f"
3088 if test -n "$func_to_host_path_result" ; then
3089 if test -z "$func_to_host_pathlist_result" ; then
3090 func_to_host_pathlist_result
="$func_to_host_path_result"
3092 func_to_host_pathlist_result
="$func_to_host_pathlist_result;$func_to_host_path_result"
3098 IFS
=$func_to_host_pathlist_oldIFS
3101 if test -z "$func_to_host_pathlist_result" ; then
3102 func_error
"Could not determine the host path(s) corresponding to"
3104 func_error
"Continuing, but uninstalled executables may not work."
3105 # Fallback. This may break if $1 contains DOS-style drive
3106 # specifications. The fix is not to complicate the expression
3107 # below, but for the user to provide a working wine installation
3108 # with winepath so that path translation in the cross-to-mingw
3109 # case works properly.
3110 lt_replace_pathsep_nix_to_dos
="s|:|;|g"
3111 func_to_host_pathlist_result
=`echo "$func_to_host_pathlist_tmp1" |\
3112 $SED -e "$lt_replace_pathsep_nix_to_dos"`
3114 # Now, add the leading and trailing path separators back
3116 :* ) func_to_host_pathlist_result
=";$func_to_host_pathlist_result"
3120 *: ) func_to_host_pathlist_result
="$func_to_host_pathlist_result;"
3127 # end: func_to_host_pathlist
3129 # func_emit_cwrapperexe_src
3130 # emit the source code for a wrapper executable on stdout
3131 # Must ONLY be called from within func_mode_link because
3132 # it depends on a number of variable set therein.
3133 func_emit_cwrapperexe_src
()
3137 /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
3138 Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
3140 The $output program cannot be directly executed until all the libtool
3141 libraries that it depends on are installed.
3143 This wrapper executable should never be moved out of the build directory.
3144 If it is, it will not operate correctly.
3146 Currently, it simply execs the wrapper *script* "$SHELL $output",
3147 but could eventually absorb all of the scripts functionality and
3148 exec $objdir/$outputname directly.
3155 # include <direct.h>
3156 # include <process.h>
3158 # define setmode _setmode
3160 # include <unistd.h>
3161 # include <stdint.h>
3164 # define HAVE_SETENV
3165 # ifdef __STRICT_ANSI__
3166 char *realpath (const char *, char *);
3167 int putenv (char *);
3168 int setenv (const char *, const char *, int);
3179 #include <sys/stat.h>
3181 #if defined(PATH_MAX)
3182 # define LT_PATHMAX PATH_MAX
3183 #elif defined(MAXPATHLEN)
3184 # define LT_PATHMAX MAXPATHLEN
3186 # define LT_PATHMAX 1024
3197 # define S_IXUSR _S_IEXEC
3199 # ifndef _INTPTR_T_DEFINED
3200 # define intptr_t int
3204 #ifndef DIR_SEPARATOR
3205 # define DIR_SEPARATOR '/'
3206 # define PATH_SEPARATOR ':'
3209 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
3211 # define HAVE_DOS_BASED_FILE_SYSTEM
3212 # define FOPEN_WB "wb"
3213 # ifndef DIR_SEPARATOR_2
3214 # define DIR_SEPARATOR_2 '\\'
3216 # ifndef PATH_SEPARATOR_2
3217 # define PATH_SEPARATOR_2 ';'
3221 #ifndef DIR_SEPARATOR_2
3222 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
3223 #else /* DIR_SEPARATOR_2 */
3224 # define IS_DIR_SEPARATOR(ch) \
3225 (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
3226 #endif /* DIR_SEPARATOR_2 */
3228 #ifndef PATH_SEPARATOR_2
3229 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
3230 #else /* PATH_SEPARATOR_2 */
3231 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
3232 #endif /* PATH_SEPARATOR_2 */
3235 # define FOPEN_WB "wb"
3239 # define FOPEN_WB "w"
3242 # define _O_BINARY 0
3245 #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
3246 #define XFREE(stale) do { \
3247 if (stale) { free ((void *) stale); stale = 0; } \
3250 #undef LTWRAPPER_DEBUGPRINTF
3251 #if defined DEBUGWRAPPER
3252 # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
3254 ltwrapper_debugprintf (const char *fmt, ...)
3257 va_start (args, fmt);
3258 (void) vfprintf (stderr, fmt, args);
3262 # define LTWRAPPER_DEBUGPRINTF(args)
3265 const char *program_name = NULL;
3267 void *xmalloc (size_t num);
3268 char *xstrdup (const char *string);
3269 const char *base_name (const char *name);
3270 char *find_executable (const char *wrapper);
3271 char *chase_symlinks (const char *pathspec);
3272 int make_executable (const char *path);
3273 int check_executable (const char *path);
3274 char *strendzap (char *str, const char *pat);
3275 void lt_fatal (const char *message, ...);
3276 void lt_setenv (const char *name, const char *value);
3277 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
3278 void lt_opt_process_env_set (const char *arg);
3279 void lt_opt_process_env_prepend (const char *arg);
3280 void lt_opt_process_env_append (const char *arg);
3281 int lt_split_name_value (const char *arg, char** name, char** value);
3282 void lt_update_exe_path (const char *name, const char *value);
3283 void lt_update_lib_path (const char *name, const char *value);
3285 static const char *script_text_part1 =
3288 func_emit_wrapper_part1 yes |
3289 $SED -e 's/\([\\"]\)/\\\1/g' \
3290 -e 's/^/ "/' -e 's/$/\\n"/'
3294 static const char *script_text_part2 =
3296 func_emit_wrapper_part2 yes |
3297 $SED -e 's/\([\\"]\)/\\\1/g' \
3298 -e 's/^/ "/' -e 's/$/\\n"/'
3302 const char * MAGIC_EXE = "$magic_exe";
3303 const char * LIB_PATH_VARNAME = "$shlibpath_var";
3306 if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
3307 func_to_host_pathlist "$temp_rpath"
3309 const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
3313 const char
* LIB_PATH_VALUE
= "";
3317 if test -n "$dllsearchpath"; then
3318 func_to_host_pathlist
"$dllsearchpath:"
3320 const char * EXE_PATH_VARNAME = "PATH";
3321 const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
3325 const char * EXE_PATH_VARNAME = "";
3326 const char * EXE_PATH_VALUE = "";
3330 if test "$fast_install" = yes; then
3332 const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
3336 const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
3343 #define LTWRAPPER_OPTION_PREFIX "--lt-"
3344 #define LTWRAPPER_OPTION_PREFIX_LENGTH 5
3346 static const size_t opt_prefix_len
= LTWRAPPER_OPTION_PREFIX_LENGTH
;
3347 static const char
*ltwrapper_option_prefix
= LTWRAPPER_OPTION_PREFIX
;
3349 static const char
*dumpscript_opt
= LTWRAPPER_OPTION_PREFIX
"dump-script";
3351 static const size_t env_set_opt_len
= LTWRAPPER_OPTION_PREFIX_LENGTH
+ 7;
3352 static const char
*env_set_opt
= LTWRAPPER_OPTION_PREFIX
"env-set";
3353 /* argument is putenv-style
"foo=bar", value of foo is
set to bar
*/
3355 static const size_t env_prepend_opt_len
= LTWRAPPER_OPTION_PREFIX_LENGTH
+ 11;
3356 static const char
*env_prepend_opt
= LTWRAPPER_OPTION_PREFIX
"env-prepend";
3357 /* argument is putenv-style
"foo=bar", new value of foo is bar
${foo} */
3359 static const size_t env_append_opt_len
= LTWRAPPER_OPTION_PREFIX_LENGTH
+ 10;
3360 static const char
*env_append_opt
= LTWRAPPER_OPTION_PREFIX
"env-append";
3361 /* argument is putenv-style
"foo=bar", new value of foo is
${foo}bar
*/
3364 main
(int argc
, char
*argv
[])
3369 char
*actual_cwrapper_path
;
3370 char
*actual_cwrapper_name
;
3373 intptr_t rval
= 127;
3377 program_name
= (char
*) xstrdup
(base_name
(argv
[0]));
3378 LTWRAPPER_DEBUGPRINTF
(("(main) argv[0] : %s\n", argv
[0]));
3379 LTWRAPPER_DEBUGPRINTF
(("(main) program_name : %s\n", program_name
));
3381 /* very simple arg parsing
; don
't want to rely on getopt */
3382 for (i = 1; i < argc; i++)
3384 if (strcmp (argv[i], dumpscript_opt) == 0)
3388 *mingw* | *cygwin* )
3389 # make stdout use "unix" line endings
3390 echo " setmode(1,_O_BINARY);"
3395 printf ("%s", script_text_part1);
3396 printf ("%s", script_text_part2);
3401 newargz = XMALLOC (char *, argc + 1);
3402 tmp_pathspec = find_executable (argv[0]);
3403 if (tmp_pathspec == NULL)
3404 lt_fatal ("Couldn't
find %s
", argv[0]);
3405 LTWRAPPER_DEBUGPRINTF (("(main
) found exe
(before symlink chase
) at : %s
\n",
3408 actual_cwrapper_path = chase_symlinks (tmp_pathspec);
3409 LTWRAPPER_DEBUGPRINTF (("(main
) found exe
(after symlink chase
) at : %s
\n",
3410 actual_cwrapper_path));
3411 XFREE (tmp_pathspec);
3413 actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
3414 strendzap (actual_cwrapper_path, actual_cwrapper_name);
3416 /* wrapper name transforms */
3417 strendzap (actual_cwrapper_name, ".exe
");
3418 tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe
", 1);
3419 XFREE (actual_cwrapper_name);
3420 actual_cwrapper_name = tmp_pathspec;
3423 /* target_name transforms -- use actual target program name; might have lt- prefix */
3424 target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
3425 strendzap (target_name, ".exe
");
3426 tmp_pathspec = lt_extend_str (target_name, ".exe
", 1);
3427 XFREE (target_name);
3428 target_name = tmp_pathspec;
3431 LTWRAPPER_DEBUGPRINTF (("(main
) libtool target name
: %s
\n",
3437 XMALLOC (char, (strlen (actual_cwrapper_path) +
3438 strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
3439 strcpy (newargz[0], actual_cwrapper_path);
3440 strcat (newargz[0], "$objdir");
3441 strcat (newargz[0], "/");
3445 /* stop here, and copy so we don't have to do this twice */
3446 tmp_pathspec = xstrdup (newargz[0]);
3448 /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
3449 strcat (newargz[0], actual_cwrapper_name);
3451 /* DO want the lt- prefix here if it exists, so use target_name */
3452 lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
3453 XFREE (tmp_pathspec);
3454 tmp_pathspec = NULL;
3462 while ((p = strchr (newargz[0], '\\')) != NULL)
3466 while ((p = strchr (lt_argv_zero, '\\')) != NULL)
3476 XFREE (target_name);
3477 XFREE (actual_cwrapper_path);
3478 XFREE (actual_cwrapper_name);
3480 lt_setenv ("BIN_SH
", "xpg4
"); /* for Tru64 */
3481 lt_setenv ("DUALCASE
", "1"); /* for MSK sh */
3482 lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
3483 lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
3486 for (i = 1; i < argc; i++)
3488 if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
3490 if (argv[i][env_set_opt_len] == '=')
3492 const char *p = argv[i] + env_set_opt_len + 1;
3493 lt_opt_process_env_set (p);
3495 else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
3497 lt_opt_process_env_set (argv[++i]); /* don't copy */
3500 lt_fatal ("%s missing required argument
", env_set_opt);
3503 if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
3505 if (argv[i][env_prepend_opt_len] == '=')
3507 const char *p = argv[i] + env_prepend_opt_len + 1;
3508 lt_opt_process_env_prepend (p);
3510 else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
3512 lt_opt_process_env_prepend (argv[++i]); /* don't copy */
3515 lt_fatal ("%s missing required argument
", env_prepend_opt);
3518 if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
3520 if (argv[i][env_append_opt_len] == '=')
3522 const char *p = argv[i] + env_append_opt_len + 1;
3523 lt_opt_process_env_append (p);
3525 else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
3527 lt_opt_process_env_append (argv[++i]); /* don't copy */
3530 lt_fatal ("%s missing required argument
", env_append_opt);
3533 if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
3535 /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
3536 namespace, but it is not one of the ones we know about and
3537 have already dealt with, above (inluding dump-script), then
3538 report an error. Otherwise, targets might begin to believe
3539 they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
3540 namespace. The first time any user complains about this, we'll
3541 need to make LTWRAPPER_OPTION_PREFIX a configure-time option
3542 or a configure.ac-settable value.
3544 lt_fatal ("Unrecognized option
in %s namespace
: '%s'",
3545 ltwrapper_option_prefix, argv[i]);
3548 newargz[++newargc] = xstrdup (argv[i]);
3550 newargz[++newargc] = NULL;
3552 LTWRAPPER_DEBUGPRINTF (("(main
) lt_argv_zero
: %s
\n", (lt_argv_zero ? lt_argv_zero : "<NULL
>")));
3553 for (i = 0; i < newargc; i++)
3555 LTWRAPPER_DEBUGPRINTF (("(main
) newargz
[%d
] : %s
\n", i, (newargz[i] ? newargz[i] : "<NULL
>")));
3563 /* execv doesn't actually work on mingw as expected on unix */
3564 rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
3567 /* failed to start process */
3568 LTWRAPPER_DEBUGPRINTF (("(main
) failed to launch target
\"%s
\": errno
= %d
\n", lt_argv_zero, errno));
3576 execv (lt_argv_zero, newargz);
3577 return rval; /* =127, but avoids unused variable warning */
3586 xmalloc (size_t num)
3588 void *p = (void *) malloc (num);
3590 lt_fatal ("Memory exhausted
");
3596 xstrdup (const char *string)
3598 return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
3603 base_name (const char *name)
3607 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3608 /* Skip over the disk name in MSDOS pathnames. */
3609 if (isalpha ((unsigned char) name[0]) && name[1] == ':')
3613 for (base = name; *name; name++)
3614 if (IS_DIR_SEPARATOR (*name))
3620 check_executable (const char *path)
3624 LTWRAPPER_DEBUGPRINTF (("(check_executable
) : %s
\n",
3625 path ? (*path ? path : "EMPTY
!") : "NULL
!"));
3626 if ((!path) || (!*path))
3629 if ((stat (path, &st) >= 0)
3630 && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
3637 make_executable (const char *path)
3642 LTWRAPPER_DEBUGPRINTF (("(make_executable
) : %s
\n",
3643 path ? (*path ? path : "EMPTY
!") : "NULL
!"));
3644 if ((!path) || (!*path))
3647 if (stat (path, &st) >= 0)
3649 rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
3654 /* Searches for the full path of the wrapper. Returns
3655 newly allocated full path name if found, NULL otherwise
3656 Does not chase symlinks, even on platforms that support them.
3659 find_executable (const char *wrapper)
3664 /* static buffer for getcwd */
3665 char tmp[LT_PATHMAX + 1];
3669 LTWRAPPER_DEBUGPRINTF (("(find_executable
) : %s
\n",
3670 wrapper ? (*wrapper ? wrapper : "EMPTY
!") : "NULL
!"));
3672 if ((wrapper == NULL) || (*wrapper == '\0'))
3675 /* Absolute path? */
3676 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3677 if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
3679 concat_name = xstrdup (wrapper);
3680 if (check_executable (concat_name))
3682 XFREE (concat_name);
3687 if (IS_DIR_SEPARATOR (wrapper[0]))
3689 concat_name = xstrdup (wrapper);
3690 if (check_executable (concat_name))
3692 XFREE (concat_name);
3694 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
3698 for (p = wrapper; *p; p++)
3706 /* no slashes; search PATH */
3707 const char *path = getenv ("PATH
");
3710 for (p = path; *p; p = p_next)
3714 for (q = p; *q; q++)
3715 if (IS_PATH_SEPARATOR (*q))
3718 p_next = (*q == '\0' ? q : q + 1);
3721 /* empty path: current directory */
3722 if (getcwd (tmp, LT_PATHMAX) == NULL)
3723 lt_fatal ("getcwd failed
");
3724 tmp_len = strlen (tmp);
3726 XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
3727 memcpy (concat_name, tmp, tmp_len);
3728 concat_name[tmp_len] = '/';
3729 strcpy (concat_name + tmp_len + 1, wrapper);
3734 XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
3735 memcpy (concat_name, p, p_len);
3736 concat_name[p_len] = '/';
3737 strcpy (concat_name + p_len + 1, wrapper);
3739 if (check_executable (concat_name))
3741 XFREE (concat_name);
3744 /* not found in PATH; assume curdir */
3746 /* Relative path | not found in path: prepend cwd */
3747 if (getcwd (tmp, LT_PATHMAX) == NULL)
3748 lt_fatal ("getcwd failed
");
3749 tmp_len = strlen (tmp);
3750 concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
3751 memcpy (concat_name, tmp, tmp_len);
3752 concat_name[tmp_len] = '/';
3753 strcpy (concat_name + tmp_len + 1, wrapper);
3755 if (check_executable (concat_name))
3757 XFREE (concat_name);
3762 chase_symlinks (const char *pathspec)
3765 return xstrdup (pathspec);
3767 char buf[LT_PATHMAX];
3769 char *tmp_pathspec = xstrdup (pathspec);
3771 int has_symlinks = 0;
3772 while (strlen (tmp_pathspec) && !has_symlinks)
3774 LTWRAPPER_DEBUGPRINTF (("checking path component
for symlinks
: %s
\n",
3776 if (lstat (tmp_pathspec, &s) == 0)
3778 if (S_ISLNK (s.st_mode) != 0)
3784 /* search backwards for last DIR_SEPARATOR */
3785 p = tmp_pathspec + strlen (tmp_pathspec) - 1;
3786 while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
3788 if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
3790 /* no more DIR_SEPARATORS left */
3797 char *errstr = strerror (errno);
3798 lt_fatal ("Error accessing
file %s
(%s
)", tmp_pathspec, errstr);
3801 XFREE (tmp_pathspec);
3805 return xstrdup (pathspec);
3808 tmp_pathspec = realpath (pathspec, buf);
3809 if (tmp_pathspec == 0)
3811 lt_fatal ("Could not follow symlinks
for %s
", pathspec);
3813 return xstrdup (tmp_pathspec);
3818 strendzap (char *str, const char *pat)
3822 assert (str != NULL);
3823 assert (pat != NULL);
3826 patlen = strlen (pat);
3830 str += len - patlen;
3831 if (strcmp (str, pat) == 0)
3838 lt_error_core (int exit_status, const char *mode,
3839 const char *message, va_list ap)
3841 fprintf (stderr, "%s
: %s
: ", program_name, mode);
3842 vfprintf (stderr, message, ap);
3843 fprintf (stderr, ".
\n");
3845 if (exit_status >= 0)
3850 lt_fatal (const char *message, ...)
3853 va_start (ap, message);
3854 lt_error_core (EXIT_FAILURE, "FATAL
", message, ap);
3859 lt_setenv (const char *name, const char *value)
3861 LTWRAPPER_DEBUGPRINTF (("(lt_setenv
) setting
'%s' to
'%s'\n",
3862 (name ? name : "<NULL
>"),
3863 (value ? value : "<NULL
>")));
3866 /* always make a copy, for consistency with !HAVE_SETENV */
3867 char *str = xstrdup (value);
3868 setenv (name, str, 1);
3870 int len = strlen (name) + 1 + strlen (value) + 1;
3871 char *str = XMALLOC (char, len);
3872 sprintf (str, "%s
=%s
", name, value);
3873 if (putenv (str) != EXIT_SUCCESS)
3882 lt_extend_str (const char *orig_value, const char *add, int to_end)
3885 if (orig_value && *orig_value)
3887 int orig_value_len = strlen (orig_value);
3888 int add_len = strlen (add);
3889 new_value = XMALLOC (char, add_len + orig_value_len + 1);
3892 strcpy (new_value, orig_value);
3893 strcpy (new_value + orig_value_len, add);
3897 strcpy (new_value, add);
3898 strcpy (new_value + add_len, orig_value);
3903 new_value = xstrdup (add);
3909 lt_split_name_value (const char *arg, char** name, char** value)
3916 p = strchr (arg, (int)'=');
3921 *value = xstrdup (++p);
3923 len = strlen (arg) - strlen (*value);
3924 *name = XMALLOC (char, len);
3925 strncpy (*name, arg, len-1);
3926 (*name)[len - 1] = '\0';
3932 lt_opt_process_env_set (const char *arg)
3937 if (lt_split_name_value (arg, &name, &value) != 0)
3941 lt_fatal ("bad argument
for %s
: '%s'", env_set_opt, arg);
3944 lt_setenv (name, value);
3950 lt_opt_process_env_prepend (const char *arg)
3954 char *new_value = NULL;
3956 if (lt_split_name_value (arg, &name, &value) != 0)
3960 lt_fatal ("bad argument
for %s
: '%s'", env_prepend_opt, arg);
3963 new_value = lt_extend_str (getenv (name), value, 0);
3964 lt_setenv (name, new_value);
3971 lt_opt_process_env_append (const char *arg)
3975 char *new_value = NULL;
3977 if (lt_split_name_value (arg, &name, &value) != 0)
3981 lt_fatal ("bad argument
for %s
: '%s'", env_append_opt, arg);
3984 new_value = lt_extend_str (getenv (name), value, 1);
3985 lt_setenv (name, new_value);
3992 lt_update_exe_path (const char *name, const char *value)
3994 LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path
) modifying
'%s' by prepending
'%s'\n",
3995 (name ? name : "<NULL
>"),
3996 (value ? value : "<NULL
>")));
3998 if (name && *name && value && *value)
4000 char *new_value = lt_extend_str (getenv (name), value, 0);
4001 /* some systems can't cope with a ':'-terminated path #' */
4002 int len = strlen (new_value);
4003 while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
4005 new_value[len-1] = '\0';
4007 lt_setenv (name, new_value);
4013 lt_update_lib_path (const char *name, const char *value)
4015 LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path
) modifying
'%s' by prepending
'%s'\n",
4016 (name ? name : "<NULL
>"),
4017 (value ? value : "<NULL
>")));
4019 if (name && *name && value && *value)
4021 char *new_value = lt_extend_str (getenv (name), value, 0);
4022 lt_setenv (name, new_value);
4030 # end: func_emit_cwrapperexe_src
4032 # func_mode_link arg...
4037 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
4038 # It is impossible to link a dll without this setting, and
4039 # we shouldn't force the makefile maintainer to figure out
4040 # which system we are compiling for in order to pass an extra
4041 # flag for every libtool invocation.
4042 # allow_undefined=no
4044 # FIXME: Unfortunately, there are problems with the above when trying
4045 # to make a dll which has undefined symbols, in which case not
4046 # even a static library is built. For now, we need to specify
4047 # -no-undefined on the libtool link line when we can be certain
4048 # that all symbols are satisfied, otherwise we get a static library.
4055 libtool_args=$nonopt
4056 base_compile="$nonopt $@
"
4057 compile_command=$nonopt
4058 finalize_command=$nonopt
4071 lib_search_path=`pwd`
4073 new_inherited_linker_flags=
4081 export_symbols_regex=
4089 precious_files_regex=
4090 prefer_static_libs=no
4103 single_module="${wl}-single_module"
4104 func_infer_tag $base_compile
4106 # We need to know -static, to get the right output filenames.
4111 test "$build_libtool_libs" != yes && \
4112 func_fatal_configuration "can not build a shared library
"
4116 -all-static | -static | -static-libtool-libs)
4119 if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
4120 func_warning "complete static linking is impossible
in this configuration
"
4122 if test -n "$link_static_flag"; then
4123 dlopen_self=$dlopen_self_static
4125 prefer_static_libs=yes
4128 if test -z "$pic_flag" && test -n "$link_static_flag"; then
4129 dlopen_self=$dlopen_self_static
4131 prefer_static_libs=built
4133 -static-libtool-libs)
4134 if test -z "$pic_flag" && test -n "$link_static_flag"; then
4135 dlopen_self=$dlopen_self_static
4137 prefer_static_libs=yes
4140 build_libtool_libs=no
4147 # See if our shared archives depend on static archives.
4148 test -n "$old_archive_from_new_cmds" && build_old_libs=yes
4150 # Go through the arguments, transforming them on the way.
4151 while test "$#" -gt 0; do
4154 func_quote_for_eval "$arg"
4155 qarg=$func_quote_for_eval_unquoted_result
4156 func_append libtool_args " $func_quote_for_eval_result"
4158 # If the previous option needs an argument, assign it.
4159 if test -n "$prev"; then
4162 func_append compile_command " @OUTPUT@
"
4163 func_append finalize_command " @OUTPUT@
"
4169 if test "$preload" = no; then
4170 # Add the symbol object into the linking commands.
4171 func_append compile_command " @SYMFILE@
"
4172 func_append finalize_command " @SYMFILE@
"
4176 *.la | *.lo) ;; # We handle these cases below.
4178 if test "$dlself" = no; then
4186 if test "$prev" = dlprefiles; then
4188 elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
4198 if test "$prev" = dlfiles; then
4199 dlfiles="$dlfiles $arg"
4201 dlprefiles="$dlprefiles $arg"
4209 export_symbols="$arg"
4211 || func_fatal_error "symbol
file \
`$arg' does not exist"
4216 export_symbols_regex="$arg"
4224 *" $qarg.ltframework "*) ;;
4225 *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
4234 inst_prefix_dir="$arg"
4239 if test -f "$arg"; then
4242 for fil in `cat "$save_arg"`
4244 # moreargs="$moreargs $fil"
4246 # A libtool-controlled object.
4248 # Check to see that this really is a libtool object.
4249 if func_lalib_unsafe_p "$arg"; then
4256 if test -z "$pic_object" ||
4257 test -z "$non_pic_object" ||
4258 test "$pic_object" = none &&
4259 test "$non_pic_object" = none; then
4260 func_fatal_error "cannot find name of object for \`$arg'"
4263 # Extract subdirectory from the argument.
4264 func_dirname "$arg" "/" ""
4265 xdir="$func_dirname_result"
4267 if test "$pic_object" != none; then
4268 # Prepend the subdirectory the object is found in.
4269 pic_object="$xdir$pic_object"
4271 if test "$prev" = dlfiles; then
4272 if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
4273 dlfiles="$dlfiles $pic_object"
4277 # If libtool objects are unsupported, then we need to preload.
4282 # CHECK ME: I think I busted this. -Ossama
4283 if test "$prev" = dlprefiles; then
4284 # Preload the old-style object.
4285 dlprefiles="$dlprefiles $pic_object"
4290 func_append libobjs " $pic_object"
4295 if test "$non_pic_object" != none; then
4296 # Prepend the subdirectory the object is found in.
4297 non_pic_object="$xdir$non_pic_object"
4299 # A standard non-PIC object
4300 func_append non_pic_objects " $non_pic_object"
4301 if test -z "$pic_object" || test "$pic_object" = none ; then
4302 arg="$non_pic_object"
4305 # If the PIC object exists, use it instead.
4306 # $xdir was prepended to $pic_object above.
4307 non_pic_object="$pic_object"
4308 func_append non_pic_objects " $non_pic_object"
4311 # Only an error if not doing a dry-run.
4312 if $opt_dry_run; then
4313 # Extract subdirectory from the argument.
4314 func_dirname "$arg" "/" ""
4315 xdir="$func_dirname_result"
4318 pic_object=$xdir$objdir/$func_lo2o_result
4319 non_pic_object=$xdir$func_lo2o_result
4320 func_append libobjs " $pic_object"
4321 func_append non_pic_objects " $non_pic_object"
4323 func_fatal_error "\`$arg' is not a valid libtool object
"
4328 func_fatal_error "link input
file \
`$arg' does not exist"
4335 precious_files_regex="$arg"
4345 # We need an absolute path.
4347 [\\/]* | [A-Za-z]:[\\/]*) ;;
4349 func_fatal_error "only absolute run-paths are allowed"
4352 if test "$prev" = rpath; then
4355 *) rpath="$rpath $arg" ;;
4360 *) xrpath="$xrpath $arg" ;;
4372 weak_libs="$weak_libs $arg"
4377 linker_flags="$linker_flags $qarg"
4378 compiler_flags="$compiler_flags $qarg"
4380 func_append compile_command " $qarg"
4381 func_append finalize_command " $qarg"
4385 compiler_flags="$compiler_flags $qarg"
4387 func_append compile_command " $qarg"
4388 func_append finalize_command " $qarg"
4392 linker_flags="$linker_flags $qarg"
4393 compiler_flags="$compiler_flags $wl$qarg"
4395 func_append compile_command " $wl$qarg"
4396 func_append finalize_command " $wl$qarg"
4400 eval "$prev=\"\$arg\""
4405 fi # test -n "$prev"
4411 if test -n "$link_static_flag"; then
4412 # See comment for -static flag below, for more details.
4413 func_append compile_command " $link_static_flag"
4414 func_append finalize_command " $link_static_flag"
4420 # FIXME: remove this flag sometime in the future.
4421 func_fatal_error "\`-allow-undefined' must not be used because it is the default"
4444 -export-symbols | -export-symbols-regex)
4445 if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
4446 func_fatal_error "more than one -exported-symbols argument is not allowed"
4448 if test "X$arg" = "X-export-symbols"; then
4466 # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
4467 # so, if we see these flags be careful not to treat them like -L
4469 case $with_gcc/$host in
4470 no/*-*-irix* | /*-*-irix*)
4471 func_append compile_command " $arg"
4472 func_append finalize_command " $arg"
4479 func_stripname '-L' '' "$arg"
4480 dir=$func_stripname_result
4481 if test -z "$dir"; then
4482 if test "$#" -gt 0; then
4483 func_fatal_error "require no space between \`-L' and \
`$1'"
4485 func_fatal_error "need path for \`-L' option"
4488 # We need an absolute path.
4490 [\\/]* | [A-Za-z]:[\\/]*) ;;
4492 absdir=`cd "$dir" && pwd`
4493 test -z "$absdir" && \
4494 func_fatal_error "cannot determine absolute directory name of \`$dir'"
4501 deplibs="$deplibs -L$dir"
4502 lib_search_path="$lib_search_path $dir"
4506 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
4507 testbindir=`$ECHO "X
$dir" | $Xsed -e 's*/lib$*/bin*'`
4508 case :$dllsearchpath: in
4510 ::) dllsearchpath=$dir;;
4511 *) dllsearchpath="$dllsearchpath:$dir";;
4513 case :$dllsearchpath: in
4514 *":$testbindir:"*) ;;
4515 ::) dllsearchpath=$testbindir;;
4516 *) dllsearchpath="$dllsearchpath:$testbindir";;
4524 if test "X
$arg" = "X-lc
" || test "X
$arg" = "X-lm
"; then
4526 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
4527 # These systems don't actually have a C or math library (as such)
4531 # These systems don't actually have a C library (as such)
4532 test "X
$arg" = "X-lc
" && continue
4534 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
4535 # Do not include libc due to us having libc/libc_r.
4536 test "X
$arg" = "X-lc
" && continue
4538 *-*-rhapsody* | *-*-darwin1.[012])
4539 # Rhapsody C and math libraries are in the System framework
4540 deplibs="$deplibs System.ltframework
"
4543 *-*-sco3.2v5* | *-*-sco5v6*)
4544 # Causes problems with __ctype
4545 test "X
$arg" = "X-lc
" && continue
4547 *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
4548 # Compiler inserts libc in the correct place for threads to work
4549 test "X
$arg" = "X-lc
" && continue
4552 elif test "X
$arg" = "X-lc_r
"; then
4554 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
4555 # Do not include libc_r directly, use -pthread flag.
4560 deplibs="$deplibs $arg"
4569 # Tru64 UNIX uses -model [arg] to determine the layout of C++
4570 # classes, name mangling, and exception handling.
4571 # Darwin uses the -arch flag to determine output architecture.
4572 -model|-arch|-isysroot)
4573 compiler_flags="$compiler_flags $arg"
4574 func_append compile_command " $arg"
4575 func_append finalize_command " $arg"
4580 -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
4581 compiler_flags="$compiler_flags $arg"
4582 func_append compile_command " $arg"
4583 func_append finalize_command " $arg"
4584 case "$new_inherited_linker_flags " in
4586 * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
4592 single_module="${wl}-multi_module"
4603 *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
4604 # The PATH hackery in wrapper scripts is required on Windows
4605 # and Darwin in order for the loader to find any dlls it needs.
4606 func_warning "\
`-no-install' is ignored for $host"
4607 func_warning "assuming \`-no-fast-install' instead"
4610 *) no_install=yes ;;
4627 -precious-files-regex)
4648 func_stripname '-R' '' "$arg"
4649 dir=$func_stripname_result
4650 # We need an absolute path.
4652 [\\/]* | [A-Za-z]:[\\/]*) ;;
4654 func_fatal_error "only absolute run-paths are allowed"
4659 *) xrpath="$xrpath $dir" ;;
4665 # The effects of -shared are defined in a previous loop.
4674 -static | -static-libtool-libs)
4675 # The effects of -static are defined in a previous loop.
4676 # We used to do the same as -all-static on platforms that
4677 # didn't have a PIC flag
, but the assumption that the effects
4678 # would be equivalent was wrong. It would break on at least
4679 # Digital Unix and AIX.
4705 func_stripname
'-Wc,' '' "$arg"
4706 args
=$func_stripname_result
4708 save_ifs
="$IFS"; IFS
=','
4709 for flag
in $args; do
4711 func_quote_for_eval
"$flag"
4712 arg
="$arg $wl$func_quote_for_eval_result"
4713 compiler_flags
="$compiler_flags $func_quote_for_eval_result"
4716 func_stripname
' ' '' "$arg"
4717 arg
=$func_stripname_result
4721 func_stripname
'-Wl,' '' "$arg"
4722 args
=$func_stripname_result
4724 save_ifs
="$IFS"; IFS
=','
4725 for flag
in $args; do
4727 func_quote_for_eval
"$flag"
4728 arg
="$arg $wl$func_quote_for_eval_result"
4729 compiler_flags
="$compiler_flags $wl$func_quote_for_eval_result"
4730 linker_flags
="$linker_flags $func_quote_for_eval_result"
4733 func_stripname
' ' '' "$arg"
4734 arg
=$func_stripname_result
4754 func_quote_for_eval
"$arg"
4755 arg
="$func_quote_for_eval_result"
4758 # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
4759 # -r[0-9][0-9]* specifies the processor on the SGI compiler
4760 # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
4761 # +DA*, +DD* enable 64-bit mode on the HP compiler
4762 # -q* pass through compiler args for the IBM compiler
4763 # -m*, -t[45]*, -txscale* pass through architecture-specific
4764 # compiler args for GCC
4765 # -F/path gives path to uninstalled frameworks, gcc on darwin
4766 # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
4767 # @file GCC response files
4768 -64|
-mips[0-9]|
-r[0-9][0-9]*|
-xarch=*|
-xtarget=*|
+DA
*|
+DD
*|
-q*|
-m*| \
4769 -t[45]*|
-txscale*|
-p|
-pg|
--coverage|
-fprofile-*|
-F*|@
*)
4770 func_quote_for_eval
"$arg"
4771 arg
="$func_quote_for_eval_result"
4772 func_append compile_command
" $arg"
4773 func_append finalize_command
" $arg"
4774 compiler_flags
="$compiler_flags $arg"
4778 # Some other compiler flag.
4780 func_quote_for_eval
"$arg"
4781 arg
="$func_quote_for_eval_result"
4785 # A standard object.
4790 # A libtool-controlled object.
4792 # Check to see that this really is a libtool object.
4793 if func_lalib_unsafe_p
"$arg"; then
4800 if test -z "$pic_object" ||
4801 test -z "$non_pic_object" ||
4802 test "$pic_object" = none
&&
4803 test "$non_pic_object" = none
; then
4804 func_fatal_error
"cannot find name of object for \`$arg'"
4807 # Extract subdirectory from the argument.
4808 func_dirname
"$arg" "/" ""
4809 xdir
="$func_dirname_result"
4811 if test "$pic_object" != none
; then
4812 # Prepend the subdirectory the object is found in.
4813 pic_object
="$xdir$pic_object"
4815 if test "$prev" = dlfiles
; then
4816 if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
4817 dlfiles
="$dlfiles $pic_object"
4821 # If libtool objects are unsupported, then we need to preload.
4826 # CHECK ME: I think I busted this. -Ossama
4827 if test "$prev" = dlprefiles
; then
4828 # Preload the old-style object.
4829 dlprefiles
="$dlprefiles $pic_object"
4834 func_append libobjs
" $pic_object"
4839 if test "$non_pic_object" != none
; then
4840 # Prepend the subdirectory the object is found in.
4841 non_pic_object
="$xdir$non_pic_object"
4843 # A standard non-PIC object
4844 func_append non_pic_objects
" $non_pic_object"
4845 if test -z "$pic_object" ||
test "$pic_object" = none
; then
4846 arg
="$non_pic_object"
4849 # If the PIC object exists, use it instead.
4850 # $xdir was prepended to $pic_object above.
4851 non_pic_object
="$pic_object"
4852 func_append non_pic_objects
" $non_pic_object"
4855 # Only an error if not doing a dry-run.
4856 if $opt_dry_run; then
4857 # Extract subdirectory from the argument.
4858 func_dirname
"$arg" "/" ""
4859 xdir
="$func_dirname_result"
4862 pic_object
=$xdir$objdir/$func_lo2o_result
4863 non_pic_object
=$xdir$func_lo2o_result
4864 func_append libobjs
" $pic_object"
4865 func_append non_pic_objects
" $non_pic_object"
4867 func_fatal_error
"\`$arg' is not a valid libtool object"
4874 deplibs
="$deplibs $arg"
4875 old_deplibs
="$old_deplibs $arg"
4880 # A libtool-controlled library.
4882 if test "$prev" = dlfiles
; then
4883 # This library was specified with -dlopen.
4884 dlfiles
="$dlfiles $arg"
4886 elif test "$prev" = dlprefiles
; then
4887 # The library was specified with -dlpreopen.
4888 dlprefiles
="$dlprefiles $arg"
4891 deplibs
="$deplibs $arg"
4896 # Some other compiler argument.
4898 # Unknown arguments in both finalize_command and compile_command need
4899 # to be aesthetically quoted because they are evaled later.
4900 func_quote_for_eval
"$arg"
4901 arg
="$func_quote_for_eval_result"
4905 # Now actually substitute the argument into the commands.
4906 if test -n "$arg"; then
4907 func_append compile_command
" $arg"
4908 func_append finalize_command
" $arg"
4910 done # argument parsing loop
4912 test -n "$prev" && \
4913 func_fatal_help
"the \`$prevarg' option requires an argument"
4915 if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
4916 eval arg
=\"$export_dynamic_flag_spec\"
4917 func_append compile_command
" $arg"
4918 func_append finalize_command
" $arg"
4922 # calculate the name of the file, without its directory
4923 func_basename
"$output"
4924 outputname
="$func_basename_result"
4925 libobjs_save
="$libobjs"
4927 if test -n "$shlibpath_var"; then
4928 # get the directories listed in $shlibpath_var
4929 eval shlib_search_path
=\
`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
4933 eval sys_lib_search_path
=\"$sys_lib_search_path_spec\"
4934 eval sys_lib_dlsearch_path
=\"$sys_lib_dlsearch_path_spec\"
4936 func_dirname
"$output" "/" ""
4937 output_objdir
="$func_dirname_result$objdir"
4938 # Create the object directory.
4939 func_mkdir_p
"$output_objdir"
4941 # Determine the type of output
4944 func_fatal_help
"you must specify an output file"
4946 *.
$libext) linkmode
=oldlib
;;
4947 *.lo |
*.
$objext) linkmode
=obj
;;
4948 *.la
) linkmode
=lib
;;
4949 *) linkmode
=prog
;; # Anything else should be a program.
4955 # Find all interdependent deplibs by searching for libraries
4956 # that are linked more than once (e.g. -la -lb -la)
4957 for deplib
in $deplibs; do
4958 if $opt_duplicate_deps ; then
4960 *" $deplib "*) specialdeplibs
="$specialdeplibs $deplib" ;;
4963 libs
="$libs $deplib"
4966 if test "$linkmode" = lib
; then
4967 libs
="$predeps $libs $compiler_lib_search_path $postdeps"
4969 # Compute libraries that are listed more than once in $predeps
4970 # $postdeps and mark them as special (i.e., whose duplicates are
4971 # not to be eliminated).
4973 if $opt_duplicate_compiler_generated_deps; then
4974 for pre_post_dep
in $predeps $postdeps; do
4975 case "$pre_post_deps " in
4976 *" $pre_post_dep "*) specialdeplibs
="$specialdeplibs $pre_post_deps" ;;
4978 pre_post_deps
="$pre_post_deps $pre_post_dep"
4987 need_relink
=no
# whether we're linking any uninstalled libtool libraries
4988 notinst_deplibs
= # not-installed libtool libraries
4989 notinst_path
= # paths that contain not-installed libtool libraries
4993 passes
="conv dlpreopen link"
4994 for file in $dlfiles $dlprefiles; do
4998 func_fatal_help
"libraries can \`-dlopen' only libtool libraries: $file"
5009 passes
="conv scan dlopen dlpreopen link"
5015 for pass
in $passes; do
5016 # The preopen pass in lib mode reverses $deplibs; put it back here
5017 # so that -L comes before libs that need it for instance...
5018 if test "$linkmode,$pass" = "lib,link"; then
5019 ## FIXME: Find the place where the list is rebuilt in the wrong
5020 ## order, and fix it there properly
5022 for deplib
in $deplibs; do
5023 tmp_deplibs
="$deplib $tmp_deplibs"
5025 deplibs
="$tmp_deplibs"
5028 if test "$linkmode,$pass" = "lib,link" ||
5029 test "$linkmode,$pass" = "prog,scan"; then
5033 if test "$linkmode" = prog
; then
5035 dlopen
) libs
="$dlfiles" ;;
5036 dlpreopen
) libs
="$dlprefiles" ;;
5037 link
) libs
="$deplibs %DEPLIBS% $dependency_libs" ;;
5040 if test "$linkmode,$pass" = "lib,dlpreopen"; then
5041 # Collect and forward deplibs of preopened libtool libs
5042 for lib
in $dlprefiles; do
5043 # Ignore non-libtool-libs
5046 *.la
) func_source
"$lib" ;;
5049 # Collect preopened libtool deplibs, except any this library
5050 # has declared as weak libs
5051 for deplib
in $dependency_libs; do
5052 deplib_base
=`$ECHO "X$deplib" | $Xsed -e "$basename"`
5053 case " $weak_libs " in
5054 *" $deplib_base "*) ;;
5055 *) deplibs
="$deplibs $deplib" ;;
5061 if test "$pass" = dlopen
; then
5062 # Collect dlpreopened libraries
5063 save_deplibs
="$deplibs"
5067 for deplib
in $libs; do
5071 -mt|
-mthreads|
-kthread|
-Kthread|
-pthread|
-pthreads|
--thread-safe|
-threads)
5072 if test "$linkmode,$pass" = "prog,link"; then
5073 compile_deplibs
="$deplib $compile_deplibs"
5074 finalize_deplibs
="$deplib $finalize_deplibs"
5076 compiler_flags
="$compiler_flags $deplib"
5077 if test "$linkmode" = lib
; then
5078 case "$new_inherited_linker_flags " in
5080 * ) new_inherited_linker_flags
="$new_inherited_linker_flags $deplib" ;;
5087 if test "$linkmode" != lib
&& test "$linkmode" != prog
; then
5088 func_warning
"\`-l' is ignored for archives/objects"
5091 func_stripname
'-l' '' "$deplib"
5092 name
=$func_stripname_result
5093 if test "$linkmode" = lib
; then
5094 searchdirs
="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
5096 searchdirs
="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
5098 for searchdir
in $searchdirs; do
5099 for search_ext
in .la
$std_shrext .so .a
; do
5100 # Search the libtool library
5101 lib
="$searchdir/lib${name}${search_ext}"
5102 if test -f "$lib"; then
5103 if test "$search_ext" = ".la"; then
5112 if test "$found" != yes; then
5113 # deplib doesn't seem to be a libtool library
5114 if test "$linkmode,$pass" = "prog,link"; then
5115 compile_deplibs
="$deplib $compile_deplibs"
5116 finalize_deplibs
="$deplib $finalize_deplibs"
5118 deplibs
="$deplib $deplibs"
5119 test "$linkmode" = lib
&& newdependency_libs
="$deplib $newdependency_libs"
5122 else # deplib is a libtool library
5123 # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
5124 # We need to do some special things here, and not later.
5125 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
5126 case " $predeps $postdeps " in
5128 if func_lalib_p
"$lib"; then
5132 for l
in $old_library $library_names; do
5135 if test "X$ll" = "X$old_library" ; then # only static version available
5137 func_dirname
"$lib" "" "."
5138 ladir
="$func_dirname_result"
5139 lib
=$ladir/$old_library
5140 if test "$linkmode,$pass" = "prog,link"; then
5141 compile_deplibs
="$deplib $compile_deplibs"
5142 finalize_deplibs
="$deplib $finalize_deplibs"
5144 deplibs
="$deplib $deplibs"
5145 test "$linkmode" = lib
&& newdependency_libs
="$deplib $newdependency_libs"
5157 if test "$linkmode,$pass" = "prog,link"; then
5158 compile_deplibs
="$deplib $compile_deplibs"
5159 finalize_deplibs
="$deplib $finalize_deplibs"
5161 deplibs
="$deplib $deplibs"
5162 if test "$linkmode" = lib
; then
5163 case "$new_inherited_linker_flags " in
5165 * ) new_inherited_linker_flags
="$new_inherited_linker_flags $deplib" ;;
5174 deplibs
="$deplib $deplibs"
5175 test "$pass" = conv
&& continue
5176 newdependency_libs
="$deplib $newdependency_libs"
5177 func_stripname
'-L' '' "$deplib"
5178 newlib_search_path
="$newlib_search_path $func_stripname_result"
5181 if test "$pass" = conv
; then
5182 deplibs
="$deplib $deplibs"
5185 if test "$pass" = scan
; then
5186 deplibs
="$deplib $deplibs"
5188 compile_deplibs
="$deplib $compile_deplibs"
5189 finalize_deplibs
="$deplib $finalize_deplibs"
5191 func_stripname
'-L' '' "$deplib"
5192 newlib_search_path
="$newlib_search_path $func_stripname_result"
5195 func_warning
"\`-L' is ignored for archives/objects"
5201 if test "$pass" = link
; then
5202 func_stripname
'-R' '' "$deplib"
5203 dir
=$func_stripname_result
5204 # Make sure the xrpath contains only unique directories.
5207 *) xrpath
="$xrpath $dir" ;;
5210 deplibs
="$deplib $deplibs"
5213 *.la
) lib
="$deplib" ;;
5215 if test "$pass" = conv
; then
5216 deplibs
="$deplib $deplibs"
5221 # Linking convenience modules into shared libraries is allowed,
5222 # but linking other static libraries is non-portable.
5223 case " $dlpreconveniencelibs " in
5227 case $deplibs_check_method in
5229 set dummy
$deplibs_check_method; shift
5230 match_pattern_regex
=`expr "$deplibs_check_method" : "$1 \(.*\)"`
5231 if eval "\$ECHO \"X$deplib\"" 2>/dev
/null |
$Xsed -e 10q \
5232 |
$EGREP "$match_pattern_regex" > /dev
/null
; then
5240 if test "$valid_a_lib" != yes; then
5242 $ECHO "*** Warning: Trying to link with static lib archive $deplib."
5243 $ECHO "*** I have the capability to make that library automatically link in when"
5244 $ECHO "*** you link to this library. But I can only do this if you have a"
5245 $ECHO "*** shared version of the library, which you do not appear to have"
5246 $ECHO "*** because the file extensions .$libext of this argument makes me believe"
5247 $ECHO "*** that it is just a static archive that I should not use here."
5250 $ECHO "*** Warning: Linking the shared library $output against the"
5251 $ECHO "*** static library $deplib is not portable!"
5252 deplibs
="$deplib $deplibs"
5259 if test "$pass" != link
; then
5260 deplibs
="$deplib $deplibs"
5262 compile_deplibs
="$deplib $compile_deplibs"
5263 finalize_deplibs
="$deplib $finalize_deplibs"
5270 if test "$pass" = conv
; then
5271 deplibs
="$deplib $deplibs"
5272 elif test "$linkmode" = prog
; then
5273 if test "$pass" = dlpreopen ||
test "$dlopen_support" != yes ||
test "$build_libtool_libs" = no
; then
5274 # If there is no dlopen support or we're linking statically,
5275 # we need to preload.
5276 newdlprefiles
="$newdlprefiles $deplib"
5277 compile_deplibs
="$deplib $compile_deplibs"
5278 finalize_deplibs
="$deplib $finalize_deplibs"
5280 newdlfiles
="$newdlfiles $deplib"
5291 if test "$found" = yes ||
test -f "$lib"; then :
5293 func_fatal_error
"cannot find the library \`$lib' or unhandled argument \`$deplib'"
5296 # Check to see that this really is a libtool archive.
5297 func_lalib_unsafe_p
"$lib" \
5298 || func_fatal_error
"\`$lib' is not a valid libtool archive"
5300 func_dirname
"$lib" "" "."
5301 ladir
="$func_dirname_result"
5309 inherited_linker_flags
=
5310 # If the library was installed with an old release of libtool,
5311 # it will not redefine variables installed, or shouldnotlink
5320 # Convert "-framework foo" to "foo.ltframework"
5321 if test -n "$inherited_linker_flags"; then
5322 tmp_inherited_linker_flags
=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
5323 for tmp_inherited_linker_flag
in $tmp_inherited_linker_flags; do
5324 case " $new_inherited_linker_flags " in
5325 *" $tmp_inherited_linker_flag "*) ;;
5326 *) new_inherited_linker_flags
="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
5330 dependency_libs
=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
5331 if test "$linkmode,$pass" = "lib,link" ||
5332 test "$linkmode,$pass" = "prog,scan" ||
5333 { test "$linkmode" != prog
&& test "$linkmode" != lib
; }; then
5334 test -n "$dlopen" && dlfiles
="$dlfiles $dlopen"
5335 test -n "$dlpreopen" && dlprefiles
="$dlprefiles $dlpreopen"
5338 if test "$pass" = conv
; then
5339 # Only check for convenience libraries
5340 deplibs
="$lib $deplibs"
5341 if test -z "$libdir"; then
5342 if test -z "$old_library"; then
5343 func_fatal_error
"cannot find name of link library for \`$lib'"
5345 # It is a libtool convenience library, so add in its objects.
5346 convenience
="$convenience $ladir/$objdir/$old_library"
5347 old_convenience
="$old_convenience $ladir/$objdir/$old_library"
5348 elif test "$linkmode" != prog
&& test "$linkmode" != lib
; then
5349 func_fatal_error
"\`$lib' is not a convenience library"
5352 for deplib
in $dependency_libs; do
5353 deplibs
="$deplib $deplibs"
5354 if $opt_duplicate_deps ; then
5355 case "$tmp_libs " in
5356 *" $deplib "*) specialdeplibs
="$specialdeplibs $deplib" ;;
5359 tmp_libs
="$tmp_libs $deplib"
5365 # Get the name of the library we link against.
5367 for l
in $old_library $library_names; do
5370 if test -z "$linklib"; then
5371 func_fatal_error
"cannot find name of link library for \`$lib'"
5374 # This library was specified with -dlopen.
5375 if test "$pass" = dlopen
; then
5376 if test -z "$libdir"; then
5377 func_fatal_error
"cannot -dlopen a convenience library: \`$lib'"
5379 if test -z "$dlname" ||
5380 test "$dlopen_support" != yes ||
5381 test "$build_libtool_libs" = no
; then
5382 # If there is no dlname, no dlopen support or we're linking
5383 # statically, we need to preload. We also need to preload any
5384 # dependent libraries so libltdl's deplib preloader doesn't
5385 # bomb out in the load deplibs phase.
5386 dlprefiles
="$dlprefiles $lib $dependency_libs"
5388 newdlfiles
="$newdlfiles $lib"
5393 # We need an absolute path.
5395 [\\/]* |
[A-Za-z
]:[\\/]*) abs_ladir
="$ladir" ;;
5397 abs_ladir
=`cd "$ladir" && pwd`
5398 if test -z "$abs_ladir"; then
5399 func_warning
"cannot determine absolute directory name of \`$ladir'"
5400 func_warning
"passing it literally to the linker, although it might fail"
5405 func_basename
"$lib"
5406 laname
="$func_basename_result"
5408 # Find the relevant object directory and library name.
5409 if test "X$installed" = Xyes
; then
5410 if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
5411 func_warning
"library \`$lib' was moved."
5419 test "X$hardcode_automatic" = Xyes
&& avoidtemprpath
=yes
5421 if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
5424 # Remove this search path later
5425 notinst_path
="$notinst_path $abs_ladir"
5427 dir
="$ladir/$objdir"
5428 absdir
="$abs_ladir/$objdir"
5429 # Remove this search path later
5430 notinst_path
="$notinst_path $abs_ladir"
5432 fi # $installed = yes
5433 func_stripname
'lib' '.la' "$laname"
5434 name
=$func_stripname_result
5436 # This library was specified with -dlpreopen.
5437 if test "$pass" = dlpreopen
; then
5438 if test -z "$libdir" && test "$linkmode" = prog
; then
5439 func_fatal_error
"only libraries may -dlpreopen a convenience library: \`$lib'"
5441 # Prefer using a static library (so that no silly _DYNAMIC symbols
5442 # are required to link).
5443 if test -n "$old_library"; then
5444 newdlprefiles
="$newdlprefiles $dir/$old_library"
5445 # Keep a list of preopened convenience libraries to check
5446 # that they are being used correctly in the link pass.
5447 test -z "$libdir" && \
5448 dlpreconveniencelibs
="$dlpreconveniencelibs $dir/$old_library"
5449 # Otherwise, use the dlname, so that lt_dlopen finds it.
5450 elif test -n "$dlname"; then
5451 newdlprefiles
="$newdlprefiles $dir/$dlname"
5453 newdlprefiles
="$newdlprefiles $dir/$linklib"
5455 fi # $pass = dlpreopen
5457 if test -z "$libdir"; then
5458 # Link the convenience library
5459 if test "$linkmode" = lib
; then
5460 deplibs
="$dir/$old_library $deplibs"
5461 elif test "$linkmode,$pass" = "prog,link"; then
5462 compile_deplibs
="$dir/$old_library $compile_deplibs"
5463 finalize_deplibs
="$dir/$old_library $finalize_deplibs"
5465 deplibs
="$lib $deplibs" # used for prog,scan pass
5471 if test "$linkmode" = prog
&& test "$pass" != link
; then
5472 newlib_search_path
="$newlib_search_path $ladir"
5473 deplibs
="$lib $deplibs"
5476 if test "$link_all_deplibs" != no ||
test -z "$library_names" ||
5477 test "$build_libtool_libs" = no
; then
5482 for deplib
in $dependency_libs; do
5484 -L*) func_stripname
'-L' '' "$deplib"
5485 newlib_search_path
="$newlib_search_path $func_stripname_result"
5488 # Need to link against all dependency_libs?
5489 if test "$linkalldeplibs" = yes; then
5490 deplibs
="$deplib $deplibs"
5492 # Need to hardcode shared library paths
5493 # or/and link against static libraries
5494 newdependency_libs
="$deplib $newdependency_libs"
5496 if $opt_duplicate_deps ; then
5497 case "$tmp_libs " in
5498 *" $deplib "*) specialdeplibs
="$specialdeplibs $deplib" ;;
5501 tmp_libs
="$tmp_libs $deplib"
5504 fi # $linkmode = prog...
5506 if test "$linkmode,$pass" = "prog,link"; then
5507 if test -n "$library_names" &&
5508 { { test "$prefer_static_libs" = no ||
5509 test "$prefer_static_libs,$installed" = "built,yes"; } ||
5510 test -z "$old_library"; }; then
5511 # We need to hardcode the library path
5512 if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
5513 # Make sure the rpath contains only unique directories.
5514 case "$temp_rpath:" in
5516 *) temp_rpath
="$temp_rpath$absdir:" ;;
5520 # Hardcode the library path.
5521 # Skip directories that are in the system default run-time
5523 case " $sys_lib_dlsearch_path " in
5526 case "$compile_rpath " in
5528 *) compile_rpath
="$compile_rpath $absdir"
5532 case " $sys_lib_dlsearch_path " in
5535 case "$finalize_rpath " in
5537 *) finalize_rpath
="$finalize_rpath $libdir"
5541 fi # $linkmode,$pass = prog,link...
5543 if test "$alldeplibs" = yes &&
5544 { test "$deplibs_check_method" = pass_all ||
5545 { test "$build_libtool_libs" = yes &&
5546 test -n "$library_names"; }; }; then
5547 # We only need to search for static libraries
5552 link_static
=no
# Whether the deplib will be linked statically
5553 use_static_libs
=$prefer_static_libs
5554 if test "$use_static_libs" = built
&& test "$installed" = yes; then
5557 if test -n "$library_names" &&
5558 { test "$use_static_libs" = no ||
test -z "$old_library"; }; then
5560 *cygwin
* |
*mingw
* |
*cegcc
*)
5561 # No point in relinking DLLs because paths are not encoded
5562 notinst_deplibs
="$notinst_deplibs $lib"
5566 if test "$installed" = no
; then
5567 notinst_deplibs
="$notinst_deplibs $lib"
5572 # This is a shared library
5574 # Warn about portability, can't link against -module's on some
5575 # systems (darwin). Don't bleat about dlopened modules though!
5577 for dlpremoduletest
in $dlprefiles; do
5578 if test "X$dlpremoduletest" = "X$lib"; then
5579 dlopenmodule
="$dlpremoduletest"
5583 if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link
; then
5585 if test "$linkmode" = prog
; then
5586 $ECHO "*** Warning: Linking the executable $output against the loadable module"
5588 $ECHO "*** Warning: Linking the shared library $output against the loadable module"
5590 $ECHO "*** $linklib is not portable!"
5592 if test "$linkmode" = lib
&&
5593 test "$hardcode_into_libs" = yes; then
5594 # Hardcode the library path.
5595 # Skip directories that are in the system default run-time
5597 case " $sys_lib_dlsearch_path " in
5600 case "$compile_rpath " in
5602 *) compile_rpath
="$compile_rpath $absdir"
5606 case " $sys_lib_dlsearch_path " in
5609 case "$finalize_rpath " in
5611 *) finalize_rpath
="$finalize_rpath $libdir"
5617 if test -n "$old_archive_from_expsyms_cmds"; then
5618 # figure out the soname
5619 set dummy
$library_names
5623 libname
=`eval "\\$ECHO \"$libname_spec\""`
5624 # use dlname if we got it. it's perfectly good, no?
5625 if test -n "$dlname"; then
5627 elif test -n "$soname_spec"; then
5630 *cygwin
* | mingw
* |
*cegcc
*)
5631 func_arith
$current - $age
5632 major
=$func_arith_result
5636 eval soname
=\"$soname_spec\"
5641 # Make a new name for the extract_expsyms_cmds to use
5643 func_basename
"$soroot"
5644 soname
="$func_basename_result"
5645 func_stripname
'lib' '.dll' "$soname"
5646 newlib
=libimp-
$func_stripname_result.a
5648 # If the library has no export list, then create one now
5649 if test -f "$output_objdir/$soname-def"; then :
5651 func_verbose
"extracting exported symbol list from \`$soname'"
5652 func_execute_cmds
"$extract_expsyms_cmds" 'exit $?'
5656 if test -f "$output_objdir/$newlib"; then :; else
5657 func_verbose
"generating import library for \`$soname'"
5658 func_execute_cmds
"$old_archive_from_expsyms_cmds" 'exit $?'
5660 # make sure the library variables are pointing to the new library
5663 fi # test -n "$old_archive_from_expsyms_cmds"
5665 if test "$linkmode" = prog ||
test "$mode" != relink
; then
5670 case $hardcode_action in
5671 immediate | unsupported
)
5672 if test "$hardcode_direct" = no
; then
5675 *-*-sco3.2v5.0.
[024]*) add_dir
="-L$dir" ;;
5676 *-*-sysv4*uw2
*) add_dir
="-L$dir" ;;
5677 *-*-sysv5OpenUNIX* |
*-*-sysv5UnixWare7.
[01].
[10]* | \
5678 *-*-unixware7*) add_dir
="-L$dir" ;;
5680 # if the lib is a (non-dlopened) module then we can not
5681 # link against it, someone is ignoring the earlier warnings
5682 if /usr
/bin
/file -L $add 2> /dev
/null |
5683 $GREP ": [^:]* bundle" >/dev
/null
; then
5684 if test "X$dlopenmodule" != "X$lib"; then
5685 $ECHO "*** Warning: lib $linklib is a module, not a shared library"
5686 if test -z "$old_library" ; then
5688 $ECHO "*** And there doesn't seem to be a static archive available"
5689 $ECHO "*** The link will probably fail, sorry"
5691 add
="$dir/$old_library"
5693 elif test -n "$old_library"; then
5694 add
="$dir/$old_library"
5698 elif test "$hardcode_minus_L" = no
; then
5700 *-*-sunos*) add_shlibpath
="$dir" ;;
5704 elif test "$hardcode_shlibpath_var" = no
; then
5705 add_shlibpath
="$dir"
5712 if test "$hardcode_direct" = yes &&
5713 test "$hardcode_direct_absolute" = no
; then
5715 elif test "$hardcode_minus_L" = yes; then
5717 # Try looking first in the location we're being installed to.
5718 if test -n "$inst_prefix_dir"; then
5721 add_dir
="$add_dir -L$inst_prefix_dir$libdir"
5726 elif test "$hardcode_shlibpath_var" = yes; then
5727 add_shlibpath
="$dir"
5736 if test "$lib_linked" != yes; then
5737 func_fatal_configuration
"unsupported hardcode properties"
5740 if test -n "$add_shlibpath"; then
5741 case :$compile_shlibpath: in
5742 *":$add_shlibpath:"*) ;;
5743 *) compile_shlibpath
="$compile_shlibpath$add_shlibpath:" ;;
5746 if test "$linkmode" = prog
; then
5747 test -n "$add_dir" && compile_deplibs
="$add_dir $compile_deplibs"
5748 test -n "$add" && compile_deplibs
="$add $compile_deplibs"
5750 test -n "$add_dir" && deplibs
="$add_dir $deplibs"
5751 test -n "$add" && deplibs
="$add $deplibs"
5752 if test "$hardcode_direct" != yes &&
5753 test "$hardcode_minus_L" != yes &&
5754 test "$hardcode_shlibpath_var" = yes; then
5755 case :$finalize_shlibpath: in
5757 *) finalize_shlibpath
="$finalize_shlibpath$libdir:" ;;
5763 if test "$linkmode" = prog ||
test "$mode" = relink
; then
5767 # Finalize command for both is simple: just hardcode it.
5768 if test "$hardcode_direct" = yes &&
5769 test "$hardcode_direct_absolute" = no
; then
5770 add
="$libdir/$linklib"
5771 elif test "$hardcode_minus_L" = yes; then
5774 elif test "$hardcode_shlibpath_var" = yes; then
5775 case :$finalize_shlibpath: in
5777 *) finalize_shlibpath
="$finalize_shlibpath$libdir:" ;;
5780 elif test "$hardcode_automatic" = yes; then
5781 if test -n "$inst_prefix_dir" &&
5782 test -f "$inst_prefix_dir$libdir/$linklib" ; then
5783 add
="$inst_prefix_dir$libdir/$linklib"
5785 add
="$libdir/$linklib"
5788 # We cannot seem to hardcode it, guess we'll fake it.
5790 # Try looking first in the location we're being installed to.
5791 if test -n "$inst_prefix_dir"; then
5794 add_dir
="$add_dir -L$inst_prefix_dir$libdir"
5801 if test "$linkmode" = prog
; then
5802 test -n "$add_dir" && finalize_deplibs
="$add_dir $finalize_deplibs"
5803 test -n "$add" && finalize_deplibs
="$add $finalize_deplibs"
5805 test -n "$add_dir" && deplibs
="$add_dir $deplibs"
5806 test -n "$add" && deplibs
="$add $deplibs"
5809 elif test "$linkmode" = prog
; then
5810 # Here we assume that one of hardcode_direct or hardcode_minus_L
5811 # is not unsupported. This is valid on all known static and
5813 if test "$hardcode_direct" != unsupported
; then
5814 test -n "$old_library" && linklib
="$old_library"
5815 compile_deplibs
="$dir/$linklib $compile_deplibs"
5816 finalize_deplibs
="$dir/$linklib $finalize_deplibs"
5818 compile_deplibs
="-l$name -L$dir $compile_deplibs"
5819 finalize_deplibs
="-l$name -L$dir $finalize_deplibs"
5821 elif test "$build_libtool_libs" = yes; then
5822 # Not a shared library
5823 if test "$deplibs_check_method" != pass_all
; then
5824 # We're trying link a shared library against a static one
5825 # but the system doesn't support it.
5827 # Just print a warning and add the library to dependency_libs so
5828 # that the program can be linked against the static library.
5830 $ECHO "*** Warning: This system can not link to static lib archive $lib."
5831 $ECHO "*** I have the capability to make that library automatically link in when"
5832 $ECHO "*** you link to this library. But I can only do this if you have a"
5833 $ECHO "*** shared version of the library, which you do not appear to have."
5834 if test "$module" = yes; then
5835 $ECHO "*** But as you try to build a module library, libtool will still create "
5836 $ECHO "*** a static module, that should work as long as the dlopening application"
5837 $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
5838 if test -z "$global_symbol_pipe"; then
5840 $ECHO "*** However, this would only work if libtool was able to extract symbol"
5841 $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
5842 $ECHO "*** not find such a program. So, this module is probably useless."
5843 $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
5845 if test "$build_old_libs" = no
; then
5846 build_libtool_libs
=module
5849 build_libtool_libs
=no
5853 deplibs
="$dir/$old_library $deplibs"
5856 fi # link shared/static library?
5858 if test "$linkmode" = lib
; then
5859 if test -n "$dependency_libs" &&
5860 { test "$hardcode_into_libs" != yes ||
5861 test "$build_old_libs" = yes ||
5862 test "$link_static" = yes; }; then
5863 # Extract -R from dependency_libs
5865 for libdir
in $dependency_libs; do
5867 -R*) func_stripname
'-R' '' "$libdir"
5868 temp_xrpath
=$func_stripname_result
5870 *" $temp_xrpath "*) ;;
5871 *) xrpath
="$xrpath $temp_xrpath";;
5873 *) temp_deplibs
="$temp_deplibs $libdir";;
5876 dependency_libs
="$temp_deplibs"
5879 newlib_search_path
="$newlib_search_path $absdir"
5880 # Link against this library
5881 test "$link_static" = no
&& newdependency_libs
="$abs_ladir/$laname $newdependency_libs"
5882 # ... and its dependency_libs
5884 for deplib
in $dependency_libs; do
5885 newdependency_libs
="$deplib $newdependency_libs"
5886 if $opt_duplicate_deps ; then
5887 case "$tmp_libs " in
5888 *" $deplib "*) specialdeplibs
="$specialdeplibs $deplib" ;;
5891 tmp_libs
="$tmp_libs $deplib"
5894 if test "$link_all_deplibs" != no
; then
5895 # Add the search paths of all dependency libraries
5896 for deplib
in $dependency_libs; do
5898 -L*) path
="$deplib" ;;
5900 func_dirname
"$deplib" "" "."
5901 dir
="$func_dirname_result"
5902 # We need an absolute path.
5904 [\\/]* |
[A-Za-z
]:[\\/]*) absdir
="$dir" ;;
5906 absdir
=`cd "$dir" && pwd`
5907 if test -z "$absdir"; then
5908 func_warning
"cannot determine absolute directory name of \`$dir'"
5913 if $GREP "^installed=no" $deplib > /dev
/null
; then
5917 eval deplibrary_names
=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
5918 if test -n "$deplibrary_names" ; then
5919 for tmp
in $deplibrary_names ; do
5922 if test -f "$absdir/$objdir/$depdepl" ; then
5923 depdepl
="$absdir/$objdir/$depdepl"
5924 darwin_install_name
=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
5925 if test -z "$darwin_install_name"; then
5926 darwin_install_name
=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
5928 compiler_flags
="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
5929 linker_flags
="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
5935 path
="-L$absdir/$objdir"
5939 eval libdir
=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
5940 test -z "$libdir" && \
5941 func_fatal_error
"\`$deplib' is not a valid libtool archive"
5942 test "$absdir" != "$libdir" && \
5943 func_warning
"\`$deplib' seems to be moved"
5949 case " $deplibs " in
5951 *) deplibs
="$path $deplibs" ;;
5954 fi # link_all_deplibs != no
5956 done # for deplib in $libs
5957 if test "$pass" = link
; then
5958 if test "$linkmode" = "prog"; then
5959 compile_deplibs
="$new_inherited_linker_flags $compile_deplibs"
5960 finalize_deplibs
="$new_inherited_linker_flags $finalize_deplibs"
5962 compiler_flags
="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
5965 dependency_libs
="$newdependency_libs"
5966 if test "$pass" = dlpreopen
; then
5967 # Link the dlpreopened libraries before other libraries
5968 for deplib
in $save_deplibs; do
5969 deplibs
="$deplib $deplibs"
5972 if test "$pass" != dlopen
; then
5973 if test "$pass" != conv
; then
5974 # Make sure lib_search_path contains only unique directories.
5976 for dir
in $newlib_search_path; do
5977 case "$lib_search_path " in
5979 *) lib_search_path
="$lib_search_path $dir" ;;
5985 if test "$linkmode,$pass" != "prog,link"; then
5988 vars
="compile_deplibs finalize_deplibs"
5990 for var
in $vars dependency_libs
; do
5991 # Add libraries to $var in reverse order
5992 eval tmp_libs
=\"\$
$var\"
5994 for deplib
in $tmp_libs; do
5995 # FIXME: Pedantically, this is the right thing to do, so
5996 # that some nasty dependency loop isn't accidentally
5998 #new_libs="$deplib $new_libs"
5999 # Pragmatically, this seems to cause very few problems in
6002 -L*) new_libs
="$deplib $new_libs" ;;
6005 # And here is the reason: when a library appears more
6006 # than once as an explicit dependence of a library, or
6007 # is implicitly linked in more than once by the
6008 # compiler, it is considered special, and multiple
6009 # occurrences thereof are not removed. Compare this
6010 # with having the same library being listed as a
6011 # dependency of multiple other libraries: in this case,
6012 # we know (pedantically, we assume) the library does not
6013 # need to be listed more than once, so we keep only the
6014 # last copy. This is not always right, but it is rare
6015 # enough that we require users that really mean to play
6016 # such unportable linking tricks to link the library
6017 # using -Wl,-lname, so that libtool does not consider it
6018 # for duplicate removal.
6019 case " $specialdeplibs " in
6020 *" $deplib "*) new_libs
="$deplib $new_libs" ;;
6022 case " $new_libs " in
6024 *) new_libs
="$deplib $new_libs" ;;
6032 for deplib
in $new_libs; do
6035 case " $tmp_libs " in
6037 *) tmp_libs
="$tmp_libs $deplib" ;;
6040 *) tmp_libs
="$tmp_libs $deplib" ;;
6043 eval $var=\"$tmp_libs\"
6046 # Last step: remove runtime libs from dependency_libs
6047 # (they stay in deplibs)
6049 for i
in $dependency_libs ; do
6050 case " $predeps $postdeps $compiler_lib_search_path " in
6055 if test -n "$i" ; then
6056 tmp_libs
="$tmp_libs $i"
6059 dependency_libs
=$tmp_libs
6061 if test "$linkmode" = prog
; then
6062 dlfiles
="$newdlfiles"
6064 if test "$linkmode" = prog ||
test "$linkmode" = lib
; then
6065 dlprefiles
="$newdlprefiles"
6070 if test -n "$dlfiles$dlprefiles" ||
test "$dlself" != no
; then
6071 func_warning
"\`-dlopen' is ignored for archives"
6076 func_warning
"\`-l' and \`-L' are ignored for archives" ;;
6079 test -n "$rpath" && \
6080 func_warning
"\`-rpath' is ignored for archives"
6082 test -n "$xrpath" && \
6083 func_warning
"\`-R' is ignored for archives"
6085 test -n "$vinfo" && \
6086 func_warning
"\`-version-info/-version-number' is ignored for archives"
6088 test -n "$release" && \
6089 func_warning
"\`-release' is ignored for archives"
6091 test -n "$export_symbols$export_symbols_regex" && \
6092 func_warning
"\`-export-symbols' is ignored for archives"
6094 # Now set the variables for building old libraries.
6095 build_libtool_libs
=no
6097 objs
="$objs$old_deplibs"
6101 # Make sure we only generate libraries of the form `libNAME.la'.
6104 func_stripname
'lib' '.la' "$outputname"
6105 name
=$func_stripname_result
6106 eval shared_ext
=\"$shrext_cmds\"
6107 eval libname
=\"$libname_spec\"
6110 test "$module" = no
&& \
6111 func_fatal_help
"libtool library \`$output' must begin with \`lib'"
6113 if test "$need_lib_prefix" != no
; then
6114 # Add the "lib" prefix for modules if required
6115 func_stripname
'' '.la' "$outputname"
6116 name
=$func_stripname_result
6117 eval shared_ext
=\"$shrext_cmds\"
6118 eval libname
=\"$libname_spec\"
6120 func_stripname
'' '.la' "$outputname"
6121 libname
=$func_stripname_result
6126 if test -n "$objs"; then
6127 if test "$deplibs_check_method" != pass_all
; then
6128 func_fatal_error
"cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
6131 $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
6132 $ECHO "*** objects $objs is not portable!"
6133 libobjs
="$libobjs $objs"
6137 test "$dlself" != no
&& \
6138 func_warning
"\`-dlopen self' is ignored for libtool libraries"
6142 test "$#" -gt 1 && \
6143 func_warning
"ignoring multiple \`-rpath's for a libtool library"
6148 if test -z "$rpath"; then
6149 if test "$build_libtool_libs" = yes; then
6150 # Building a libtool convenience library.
6151 # Some compilers have problems with a `.al' extension so
6152 # convenience libraries should have the same extension an
6153 # archive normally would.
6154 oldlibs
="$output_objdir/$libname.$libext $oldlibs"
6155 build_libtool_libs
=convenience
6159 test -n "$vinfo" && \
6160 func_warning
"\`-version-info/-version-number' is ignored for convenience libraries"
6162 test -n "$release" && \
6163 func_warning
"\`-release' is ignored for convenience libraries"
6166 # Parse the version information argument.
6167 save_ifs
="$IFS"; IFS
=':'
6168 set dummy
$vinfo 0 0 0
6173 func_fatal_help
"too many parameters to \`-version-info'"
6175 # convert absolute version numbers to libtool ages
6176 # this retains compatibility with .la files and attempts
6177 # to make the code below a bit more comprehensible
6179 case $vinfo_number in
6183 number_revision
="$3"
6185 # There are really only two kinds -- those that
6186 # use the current revision as the major version
6187 # and those that subtract age and use age as
6188 # a minor version. But, then there is irix
6189 # which has an extra 1 added just for fun
6191 case $version_type in
6192 darwin|linux|osf|windows|none
)
6193 func_arith
$number_major + $number_minor
6194 current
=$func_arith_result
6196 revision
="$number_revision"
6198 freebsd-aout|freebsd-elf|sunos
)
6199 current
="$number_major"
6200 revision
="$number_minor"
6204 func_arith
$number_major + $number_minor
6205 current
=$func_arith_result
6207 revision
="$number_minor"
6208 lt_irix_increment
=no
6219 # Check that each of the things are valid numbers.
6221 0|
[1-9]|
[1-9][0-9]|
[1-9][0-9][0-9]|
[1-9][0-9][0-9][0-9]|
[1-9][0-9][0-9][0-9][0-9]) ;;
6223 func_error
"CURRENT \`$current' must be a nonnegative integer"
6224 func_fatal_error
"\`$vinfo' is not valid version information"
6229 0|
[1-9]|
[1-9][0-9]|
[1-9][0-9][0-9]|
[1-9][0-9][0-9][0-9]|
[1-9][0-9][0-9][0-9][0-9]) ;;
6231 func_error
"REVISION \`$revision' must be a nonnegative integer"
6232 func_fatal_error
"\`$vinfo' is not valid version information"
6237 0|
[1-9]|
[1-9][0-9]|
[1-9][0-9][0-9]|
[1-9][0-9][0-9][0-9]|
[1-9][0-9][0-9][0-9][0-9]) ;;
6239 func_error
"AGE \`$age' must be a nonnegative integer"
6240 func_fatal_error
"\`$vinfo' is not valid version information"
6244 if test "$age" -gt "$current"; then
6245 func_error
"AGE \`$age' is greater than the current interface number \`$current'"
6246 func_fatal_error
"\`$vinfo' is not valid version information"
6249 # Calculate the version variables.
6253 case $version_type in
6257 # Like Linux, but with the current version available in
6258 # verstring for coding it into the library header
6259 func_arith
$current - $age
6260 major
=.
$func_arith_result
6261 versuffix
="$major.$age.$revision"
6262 # Darwin ld doesn't like 0 for these options...
6263 func_arith
$current + 1
6264 minor_current
=$func_arith_result
6265 xlcverstring
="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
6266 verstring
="-compatibility_version $minor_current -current_version $minor_current.$revision"
6271 versuffix
=".$current.$revision";
6276 versuffix
=".$current"
6280 if test "X$lt_irix_increment" = "Xno"; then
6281 func_arith
$current - $age
6283 func_arith
$current - $age + 1
6285 major
=$func_arith_result
6287 case $version_type in
6288 nonstopux
) verstring_prefix
=nonstopux
;;
6289 *) verstring_prefix
=sgi
;;
6291 verstring
="$verstring_prefix$major.$revision"
6293 # Add in all the interfaces that we are compatible with.
6295 while test "$loop" -ne 0; do
6296 func_arith
$revision - $loop
6297 iface
=$func_arith_result
6298 func_arith
$loop - 1
6299 loop
=$func_arith_result
6300 verstring
="$verstring_prefix$major.$iface:$verstring"
6303 # Before this point, $major must not contain `.'.
6305 versuffix
="$major.$revision"
6309 func_arith
$current - $age
6310 major
=.
$func_arith_result
6311 versuffix
="$major.$age.$revision"
6315 func_arith
$current - $age
6316 major
=.
$func_arith_result
6317 versuffix
=".$current.$age.$revision"
6318 verstring
="$current.$age.$revision"
6320 # Add in all the interfaces that we are compatible with.
6322 while test "$loop" -ne 0; do
6323 func_arith
$current - $loop
6324 iface
=$func_arith_result
6325 func_arith
$loop - 1
6326 loop
=$func_arith_result
6327 verstring
="$verstring:${iface}.0"
6330 # Make executables depend on our current version.
6331 verstring
="$verstring:${current}.0"
6336 versuffix
=".$current"
6341 versuffix
=".$current.$revision"
6345 # Use '-' rather than '.', since we only want one
6346 # extension on DOS 8.3 filesystems.
6347 func_arith
$current - $age
6348 major
=$func_arith_result
6353 func_fatal_configuration
"unknown library version type \`$version_type'"
6357 # Clear the version info if we defaulted, and they specified a release.
6358 if test -z "$vinfo" && test -n "$release"; then
6360 case $version_type in
6362 # we can't check for "0.0" in archive_cmds due to quoting
6363 # problems, so we reset it completely
6370 if test "$need_version" = no
; then
6377 # Remove version info from name if versioning should be avoided
6378 if test "$avoid_version" = yes && test "$need_version" = no
; then
6384 # Check to see if the archive will have undefined symbols.
6385 if test "$allow_undefined" = yes; then
6386 if test "$allow_undefined_flag" = unsupported
; then
6387 func_warning
"undefined symbols not allowed in $host shared libraries"
6388 build_libtool_libs
=no
6392 # Don't allow undefined symbols.
6393 allow_undefined_flag
="$no_undefined_flag"
6398 func_generate_dlsyms
"$libname" "$libname" "yes"
6399 libobjs
="$libobjs $symfileobj"
6400 test "X$libobjs" = "X " && libobjs
=
6402 if test "$mode" != relink
; then
6403 # Remove our outputs, but don't remove object files since they
6404 # may have been created when compiling PIC objects.
6406 tempremovelist
=`$ECHO "$output_objdir/*"`
6407 for p
in $tempremovelist; do
6411 $output_objdir/$outputname |
$output_objdir/$libname.
* |
$output_objdir/${libname}${release}.
*)
6412 if test "X$precious_files_regex" != "X"; then
6413 if $ECHO "$p" |
$EGREP -e "$precious_files_regex" >/dev
/null
2>&1
6418 removelist
="$removelist $p"
6423 test -n "$removelist" && \
6424 func_show_eval
"${RM}r \$removelist"
6427 # Now set the variables for building old libraries.
6428 if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience
; then
6429 oldlibs
="$oldlibs $output_objdir/$libname.$libext"
6431 # Transform .lo files to .o files.
6432 oldobjs
="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
6435 # Eliminate all temporary directories.
6436 #for path in $notinst_path; do
6437 # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
6438 # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
6439 # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
6442 if test -n "$xrpath"; then
6443 # If the user specified any rpath flags, then add them.
6445 for libdir
in $xrpath; do
6446 temp_xrpath
="$temp_xrpath -R$libdir"
6447 case "$finalize_rpath " in
6449 *) finalize_rpath
="$finalize_rpath $libdir" ;;
6452 if test "$hardcode_into_libs" != yes ||
test "$build_old_libs" = yes; then
6453 dependency_libs
="$temp_xrpath $dependency_libs"
6457 # Make sure dlfiles contains only unique files that won't be dlpreopened
6458 old_dlfiles
="$dlfiles"
6460 for lib
in $old_dlfiles; do
6461 case " $dlprefiles $dlfiles " in
6463 *) dlfiles
="$dlfiles $lib" ;;
6467 # Make sure dlprefiles contains only unique files
6468 old_dlprefiles
="$dlprefiles"
6470 for lib
in $old_dlprefiles; do
6471 case "$dlprefiles " in
6473 *) dlprefiles
="$dlprefiles $lib" ;;
6477 if test "$build_libtool_libs" = yes; then
6478 if test -n "$rpath"; then
6480 *-*-cygwin* |
*-*-mingw* |
*-*-pw32* |
*-*-os2* |
*-*-beos* |
*-cegcc*)
6481 # these systems don't actually have a c library (as such)!
6483 *-*-rhapsody* |
*-*-darwin1.
[012])
6484 # Rhapsody C library is in the System framework
6485 deplibs
="$deplibs System.ltframework"
6488 # Don't link with libc until the a.out ld.so is fixed.
6490 *-*-openbsd* |
*-*-freebsd* |
*-*-dragonfly*)
6491 # Do not include libc due to us having libc/libc_r.
6493 *-*-sco3.2v5
* |
*-*-sco5v6*)
6494 # Causes problems with __ctype
6496 *-*-sysv4.2uw2
* |
*-*-sysv5* |
*-*-unixware* |
*-*-OpenUNIX*)
6497 # Compiler inserts libc in the correct place for threads to work
6500 # Add libc to deplibs on all other systems if necessary.
6501 if test "$build_libtool_need_lc" = "yes"; then
6502 deplibs
="$deplibs -lc"
6508 # Transform deplibs into only deplibs that can be linked in shared.
6510 libname_save
=$libname
6511 release_save
=$release
6512 versuffix_save
=$versuffix
6514 # I'm not sure if I'm treating the release correctly. I think
6515 # release should show up in the -l (ie -lgmp5) so we don't want to
6516 # add it in twice. Is that correct?
6522 case $deplibs_check_method in
6524 # Don't check for shared/static. Everything works.
6525 # This might be a little naive. We might want to check
6526 # whether the library exists or not. But this is on
6527 # osf3 & osf4 and I'm not really sure... Just
6528 # implementing what was already the behavior.
6532 # This code stresses the "libraries are programs" paradigm to its
6533 # limits. Maybe even breaks it. We compile a program, linking it
6534 # against the deplibs as a proxy for the library. Then we can check
6535 # whether they linked in statically or dynamically with ldd.
6536 $opt_dry_run ||
$RM conftest.c
6537 cat > conftest.c
<<EOF
6538 int main() { return 0; }
6540 $opt_dry_run ||
$RM conftest
6541 if $LTCC $LTCFLAGS -o conftest conftest.c
$deplibs; then
6542 ldd_output
=`ldd conftest`
6543 for i
in $deplibs; do
6546 func_stripname
-l '' "$i"
6547 name
=$func_stripname_result
6548 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6549 case " $predeps $postdeps " in
6551 newdeplibs
="$newdeplibs $i"
6556 if test -n "$i" ; then
6557 libname
=`eval "\\$ECHO \"$libname_spec\""`
6558 deplib_matches
=`eval "\\$ECHO \"$library_names_spec\""`
6559 set dummy
$deplib_matches; shift
6561 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
6562 newdeplibs
="$newdeplibs $i"
6566 $ECHO "*** Warning: dynamic linker does not accept needed library $i."
6567 $ECHO "*** I have the capability to make that library automatically link in when"
6568 $ECHO "*** you link to this library. But I can only do this if you have a"
6569 $ECHO "*** shared version of the library, which I believe you do not have"
6570 $ECHO "*** because a test_compile did reveal that the linker did not use it for"
6571 $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
6576 newdeplibs
="$newdeplibs $i"
6581 # Error occurred in the first compile. Let's try to salvage
6582 # the situation: Compile a separate program for each library.
6583 for i
in $deplibs; do
6586 func_stripname
-l '' "$i"
6587 name
=$func_stripname_result
6588 $opt_dry_run ||
$RM conftest
6589 if $LTCC $LTCFLAGS -o conftest conftest.c
$i; then
6590 ldd_output
=`ldd conftest`
6591 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6592 case " $predeps $postdeps " in
6594 newdeplibs
="$newdeplibs $i"
6599 if test -n "$i" ; then
6600 libname
=`eval "\\$ECHO \"$libname_spec\""`
6601 deplib_matches
=`eval "\\$ECHO \"$library_names_spec\""`
6602 set dummy
$deplib_matches; shift
6604 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
6605 newdeplibs
="$newdeplibs $i"
6609 $ECHO "*** Warning: dynamic linker does not accept needed library $i."
6610 $ECHO "*** I have the capability to make that library automatically link in when"
6611 $ECHO "*** you link to this library. But I can only do this if you have a"
6612 $ECHO "*** shared version of the library, which you do not appear to have"
6613 $ECHO "*** because a test_compile did reveal that the linker did not use this one"
6614 $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
6620 $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
6621 $ECHO "*** make it link in! You will probably need to install it or some"
6622 $ECHO "*** library that it depends on before this library will be fully"
6623 $ECHO "*** functional. Installing it before continuing would be even better."
6627 newdeplibs
="$newdeplibs $i"
6634 set dummy
$deplibs_check_method; shift
6635 file_magic_regex
=`expr "$deplibs_check_method" : "$1 \(.*\)"`
6636 for a_deplib
in $deplibs; do
6639 func_stripname
-l '' "$a_deplib"
6640 name
=$func_stripname_result
6641 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6642 case " $predeps $postdeps " in
6644 newdeplibs
="$newdeplibs $a_deplib"
6649 if test -n "$a_deplib" ; then
6650 libname
=`eval "\\$ECHO \"$libname_spec\""`
6651 for i
in $lib_search_path $sys_lib_search_path $shlib_search_path; do
6652 potential_libs
=`ls $i/$libname[.-]* 2>/dev/null`
6653 for potent_lib
in $potential_libs; do
6654 # Follow soft links.
6655 if ls -lLd "$potent_lib" 2>/dev
/null |
6656 $GREP " -> " >/dev
/null
; then
6659 # The statement above tries to avoid entering an
6660 # endless loop below, in case of cyclic links.
6661 # We might still enter an endless loop, since a link
6662 # loop can be closed while we follow links,
6664 potlib
="$potent_lib"
6665 while test -h "$potlib" 2>/dev
/null
; do
6666 potliblink
=`ls -ld $potlib | ${SED} 's/.* -> //'`
6668 [\\/]* |
[A-Za-z
]:[\\/]*) potlib
="$potliblink";;
6669 *) potlib
=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
6672 if eval $file_magic_cmd \"\
$potlib\" 2>/dev
/null |
6674 $EGREP "$file_magic_regex" > /dev
/null
; then
6675 newdeplibs
="$newdeplibs $a_deplib"
6682 if test -n "$a_deplib" ; then
6685 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
6686 $ECHO "*** I have the capability to make that library automatically link in when"
6687 $ECHO "*** you link to this library. But I can only do this if you have a"
6688 $ECHO "*** shared version of the library, which you do not appear to have"
6689 $ECHO "*** because I did check the linker path looking for a file starting"
6690 if test -z "$potlib" ; then
6691 $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
6693 $ECHO "*** with $libname and none of the candidates passed a file format test"
6694 $ECHO "*** using a file magic. Last file checked: $potlib"
6699 # Add a -L argument.
6700 newdeplibs
="$newdeplibs $a_deplib"
6703 done # Gone through all deplibs.
6706 set dummy
$deplibs_check_method; shift
6707 match_pattern_regex
=`expr "$deplibs_check_method" : "$1 \(.*\)"`
6708 for a_deplib
in $deplibs; do
6711 func_stripname
-l '' "$a_deplib"
6712 name
=$func_stripname_result
6713 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6714 case " $predeps $postdeps " in
6716 newdeplibs
="$newdeplibs $a_deplib"
6721 if test -n "$a_deplib" ; then
6722 libname
=`eval "\\$ECHO \"$libname_spec\""`
6723 for i
in $lib_search_path $sys_lib_search_path $shlib_search_path; do
6724 potential_libs
=`ls $i/$libname[.-]* 2>/dev/null`
6725 for potent_lib
in $potential_libs; do
6726 potlib
="$potent_lib" # see symlink-check above in file_magic test
6727 if eval "\$ECHO \"X$potent_lib\"" 2>/dev
/null |
$Xsed -e 10q | \
6728 $EGREP "$match_pattern_regex" > /dev
/null
; then
6729 newdeplibs
="$newdeplibs $a_deplib"
6736 if test -n "$a_deplib" ; then
6739 $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
6740 $ECHO "*** I have the capability to make that library automatically link in when"
6741 $ECHO "*** you link to this library. But I can only do this if you have a"
6742 $ECHO "*** shared version of the library, which you do not appear to have"
6743 $ECHO "*** because I did check the linker path looking for a file starting"
6744 if test -z "$potlib" ; then
6745 $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
6747 $ECHO "*** with $libname and none of the candidates passed a file format test"
6748 $ECHO "*** using a regex pattern. Last file checked: $potlib"
6753 # Add a -L argument.
6754 newdeplibs
="$newdeplibs $a_deplib"
6757 done # Gone through all deplibs.
6761 tmp_deplibs
=`$ECHO "X $deplibs" | $Xsed \
6762 -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
6763 if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
6764 for i
in $predeps $postdeps ; do
6765 # can't use Xsed below, because $i might contain '/'
6766 tmp_deplibs
=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
6769 if $ECHO "X $tmp_deplibs" |
$Xsed -e 's/[ ]//g' |
6770 $GREP .
>/dev
/null
; then
6772 if test "X$deplibs_check_method" = "Xnone"; then
6773 $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
6775 $ECHO "*** Warning: inter-library dependencies are not known to be supported."
6777 $ECHO "*** All declared inter-library dependencies are being dropped."
6782 versuffix
=$versuffix_save
6784 release
=$release_save
6785 libname
=$libname_save
6789 *-*-rhapsody* |
*-*-darwin1.
[012])
6790 # On Rhapsody replace the C library with the System framework
6791 newdeplibs
=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
6795 if test "$droppeddeps" = yes; then
6796 if test "$module" = yes; then
6798 $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
6799 $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
6800 $ECHO "*** a static module, that should work as long as the dlopening"
6801 $ECHO "*** application is linked with the -dlopen flag."
6802 if test -z "$global_symbol_pipe"; then
6804 $ECHO "*** However, this would only work if libtool was able to extract symbol"
6805 $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
6806 $ECHO "*** not find such a program. So, this module is probably useless."
6807 $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
6809 if test "$build_old_libs" = no
; then
6810 oldlibs
="$output_objdir/$libname.$libext"
6811 build_libtool_libs
=module
6814 build_libtool_libs
=no
6817 $ECHO "*** The inter-library dependencies that have been dropped here will be"
6818 $ECHO "*** automatically added whenever a program is linked with this library"
6819 $ECHO "*** or is declared to -dlopen it."
6821 if test "$allow_undefined" = no
; then
6823 $ECHO "*** Since this library must not contain undefined symbols,"
6824 $ECHO "*** because either the platform does not support them or"
6825 $ECHO "*** it was explicitly requested with -no-undefined,"
6826 $ECHO "*** libtool will only create a static version of it."
6827 if test "$build_old_libs" = no
; then
6828 oldlibs
="$output_objdir/$libname.$libext"
6829 build_libtool_libs
=module
6832 build_libtool_libs
=no
6837 # Done checking deplibs!
6840 # Time to change all our "foo.ltframework" stuff back to "-framework foo"
6843 newdeplibs
=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
6844 new_inherited_linker_flags
=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
6845 deplibs
=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
6849 # move library search paths that coincide with paths to not yet
6850 # installed libraries to the beginning of the library search list
6852 for path
in $notinst_path; do
6853 case " $new_libs " in
6854 *" -L$path/$objdir "*) ;;
6856 case " $deplibs " in
6857 *" -L$path/$objdir "*)
6858 new_libs
="$new_libs -L$path/$objdir" ;;
6863 for deplib
in $deplibs; do
6866 case " $new_libs " in
6868 *) new_libs
="$new_libs $deplib" ;;
6871 *) new_libs
="$new_libs $deplib" ;;
6876 # All the library-specific variables (install_libdir is set above).
6881 # Test again, we may have decided not to build it any more
6882 if test "$build_libtool_libs" = yes; then
6883 if test "$hardcode_into_libs" = yes; then
6884 # Hardcode the library paths
6887 rpath
="$finalize_rpath"
6888 test "$mode" != relink
&& rpath
="$compile_rpath$rpath"
6889 for libdir
in $rpath; do
6890 if test -n "$hardcode_libdir_flag_spec"; then
6891 if test -n "$hardcode_libdir_separator"; then
6892 if test -z "$hardcode_libdirs"; then
6893 hardcode_libdirs
="$libdir"
6895 # Just accumulate the unique libdirs.
6896 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
6897 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
6900 hardcode_libdirs
="$hardcode_libdirs$hardcode_libdir_separator$libdir"
6905 eval flag
=\"$hardcode_libdir_flag_spec\"
6906 dep_rpath
="$dep_rpath $flag"
6908 elif test -n "$runpath_var"; then
6909 case "$perm_rpath " in
6911 *) perm_rpath
="$perm_rpath $libdir" ;;
6915 # Substitute the hardcoded libdirs into the rpath.
6916 if test -n "$hardcode_libdir_separator" &&
6917 test -n "$hardcode_libdirs"; then
6918 libdir
="$hardcode_libdirs"
6919 if test -n "$hardcode_libdir_flag_spec_ld"; then
6920 eval dep_rpath
=\"$hardcode_libdir_flag_spec_ld\"
6922 eval dep_rpath
=\"$hardcode_libdir_flag_spec\"
6925 if test -n "$runpath_var" && test -n "$perm_rpath"; then
6926 # We should set the runpath_var.
6928 for dir
in $perm_rpath; do
6931 eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
6933 test -n "$dep_rpath" && deplibs
="$dep_rpath $deplibs"
6936 shlibpath
="$finalize_shlibpath"
6937 test "$mode" != relink
&& shlibpath
="$compile_shlibpath$shlibpath"
6938 if test -n "$shlibpath"; then
6939 eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
6942 # Get the real and link names of the library.
6943 eval shared_ext
=\"$shrext_cmds\"
6944 eval library_names
=\"$library_names_spec\"
6945 set dummy
$library_names
6950 if test -n "$soname_spec"; then
6951 eval soname
=\"$soname_spec\"
6955 if test -z "$dlname"; then
6959 lib
="$output_objdir/$realname"
6963 linknames
="$linknames $link"
6966 # Use standard objects if they are pic
6967 test -z "$pic_flag" && libobjs
=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
6968 test "X$libobjs" = "X " && libobjs
=
6971 if test -n "$export_symbols" && test -n "$include_expsyms"; then
6972 $opt_dry_run ||
cp "$export_symbols" "$output_objdir/$libname.uexp"
6973 export_symbols
="$output_objdir/$libname.uexp"
6974 delfiles
="$delfiles $export_symbols"
6977 orig_export_symbols
=
6979 cygwin
* | mingw
* | cegcc
*)
6980 if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
6981 # exporting using user supplied symfile
6982 if test "x`$SED 1q $export_symbols`" != xEXPORTS
; then
6983 # and it's NOT already a .def file. Must figure out
6984 # which of the given symbols are data symbols and tag
6985 # them as such. So, trigger use of export_symbols_cmds.
6986 # export_symbols gets reassigned inside the "prepare
6987 # the list of exported symbols" if statement, so the
6988 # include_expsyms logic still works.
6989 orig_export_symbols
="$export_symbols"
6991 always_export_symbols
=yes
6997 # Prepare the list of exported symbols
6998 if test -z "$export_symbols"; then
6999 if test "$always_export_symbols" = yes ||
test -n "$export_symbols_regex"; then
7000 func_verbose
"generating symbol list for \`$libname.la'"
7001 export_symbols
="$output_objdir/$libname.exp"
7002 $opt_dry_run ||
$RM $export_symbols
7003 cmds
=$export_symbols_cmds
7004 save_ifs
="$IFS"; IFS
='~'
7005 for cmd
in $cmds; do
7009 len
=$func_len_result
7010 if test "$len" -lt "$max_cmd_len" ||
test "$max_cmd_len" -le -1; then
7011 func_show_eval
"$cmd" 'exit $?'
7012 skipped_export
=false
7014 # The command line is too long to execute in one step.
7015 func_verbose
"using reloadable object file for export list..."
7017 # Break out early, otherwise skipped_export may be
7018 # set to false by a later but shorter cmd.
7023 if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
7024 func_show_eval
'$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
7025 func_show_eval
'$MV "${export_symbols}T" "$export_symbols"'
7030 if test -n "$export_symbols" && test -n "$include_expsyms"; then
7031 tmp_export_symbols
="$export_symbols"
7032 test -n "$orig_export_symbols" && tmp_export_symbols
="$orig_export_symbols"
7033 $opt_dry_run ||
eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
7036 if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
7037 # The given exports_symbols file has to be filtered, so filter it.
7038 func_verbose
"filter symbol list for \`$libname.la' to tag DATA exports"
7039 # FIXME: $output_objdir/$libname.filter potentially contains lots of
7040 # 's' commands which not all seds can handle. GNU sed should be fine
7041 # though. Also, the filter scales superlinearly with the number of
7042 # global variables. join(1) would be nice here, but unfortunately
7043 # isn't a blessed tool.
7044 $opt_dry_run ||
$SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
7045 delfiles
="$delfiles $export_symbols $output_objdir/$libname.filter"
7046 export_symbols
=$output_objdir/$libname.def
7047 $opt_dry_run ||
$SED -f $output_objdir/$libname.filter
< $orig_export_symbols > $export_symbols
7051 for test_deplib
in $deplibs; do
7052 case " $convenience " in
7053 *" $test_deplib "*) ;;
7055 tmp_deplibs
="$tmp_deplibs $test_deplib"
7059 deplibs
="$tmp_deplibs"
7061 if test -n "$convenience"; then
7062 if test -n "$whole_archive_flag_spec" &&
7063 test "$compiler_needs_object" = yes &&
7064 test -z "$libobjs"; then
7065 # extract the archives, so we have objects to list.
7066 # TODO: could optimize this to just extract one archive.
7067 whole_archive_flag_spec
=
7069 if test -n "$whole_archive_flag_spec"; then
7070 save_libobjs
=$libobjs
7071 eval libobjs
=\"\
$libobjs $whole_archive_flag_spec\"
7072 test "X$libobjs" = "X " && libobjs
=
7074 gentop
="$output_objdir/${outputname}x"
7075 generated
="$generated $gentop"
7077 func_extract_archives
$gentop $convenience
7078 libobjs
="$libobjs $func_extract_archives_result"
7079 test "X$libobjs" = "X " && libobjs
=
7083 if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
7084 eval flag
=\"$thread_safe_flag_spec\"
7085 linker_flags
="$linker_flags $flag"
7088 # Make a backup of the uninstalled library when relinking
7089 if test "$mode" = relink
; then
7090 $opt_dry_run ||
eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' ||
exit $?
7093 # Do each of the archive commands.
7094 if test "$module" = yes && test -n "$module_cmds" ; then
7095 if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
7096 eval test_cmds
=\"$module_expsym_cmds\"
7097 cmds
=$module_expsym_cmds
7099 eval test_cmds
=\"$module_cmds\"
7103 if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
7104 eval test_cmds
=\"$archive_expsym_cmds\"
7105 cmds
=$archive_expsym_cmds
7107 eval test_cmds
=\"$archive_cmds\"
7112 if test "X$skipped_export" != "X:" &&
7113 func_len
" $test_cmds" &&
7114 len
=$func_len_result &&
7115 test "$len" -lt "$max_cmd_len" ||
test "$max_cmd_len" -le -1; then
7118 # The command line is too long to link in one step, link piecewise
7119 # or, if using GNU ld and skipped_export is not :, use a linker
7122 # Save the value of $output and $libobjs because we want to
7123 # use them later. If we have whole_archive_flag_spec, we
7124 # want to use save_libobjs as it was before
7125 # whole_archive_flag_spec was expanded, because we can't
7126 # assume the linker understands whole_archive_flag_spec.
7127 # This may have to be revisited, in case too many
7128 # convenience libraries get linked in and end up exceeding
7130 if test -z "$convenience" ||
test -z "$whole_archive_flag_spec"; then
7131 save_libobjs
=$libobjs
7134 output_la
=`$ECHO "X$output" | $Xsed -e "$basename"`
7136 # Clear the reloadable object creation command queue and
7137 # initialize k to one.
7144 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
7145 output
=${output_objdir}/${output_la}.lnkscript
7146 func_verbose
"creating GNU ld script: $output"
7147 $ECHO 'INPUT (' > $output
7148 for obj
in $save_libobjs
7150 $ECHO "$obj" >> $output
7152 $ECHO ')' >> $output
7153 delfiles
="$delfiles $output"
7154 elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X
; then
7155 output
=${output_objdir}/${output_la}.lnk
7156 func_verbose
"creating linker input file list: $output"
7161 if test "$compiler_needs_object" = yes; then
7167 $ECHO "$obj" >> $output
7169 delfiles
="$delfiles $output"
7170 output
=$firstobj\"$file_list_spec$output\"
7172 if test -n "$save_libobjs"; then
7173 func_verbose
"creating reloadable object files..."
7174 output
=$output_objdir/$output_la-${k}.
$objext
7175 eval test_cmds
=\"$reload_cmds\"
7176 func_len
" $test_cmds"
7177 len0
=$func_len_result
7180 # Loop over the list of objects to be linked.
7181 for obj
in $save_libobjs
7184 func_arith
$len + $func_len_result
7185 len
=$func_arith_result
7186 if test "X$objlist" = X ||
7187 test "$len" -lt "$max_cmd_len"; then
7188 func_append objlist
" $obj"
7190 # The command $test_cmds is almost too long, add a
7191 # command to the queue.
7192 if test "$k" -eq 1 ; then
7193 # The first file doesn't have a previous command to add.
7194 eval concat_cmds
=\"$reload_cmds $objlist $last_robj\"
7196 # All subsequent reloadable object files will link in
7197 # the last one created.
7198 eval concat_cmds
=\"\
$concat_cmds~
$reload_cmds $objlist $last_robj~\
$RM $last_robj\"
7200 last_robj
=$output_objdir/$output_la-${k}.
$objext
7202 k
=$func_arith_result
7203 output
=$output_objdir/$output_la-${k}.
$objext
7205 func_len
" $last_robj"
7206 func_arith
$len0 + $func_len_result
7207 len
=$func_arith_result
7210 # Handle the remaining objects by creating one last
7211 # reloadable object file. All subsequent reloadable object
7212 # files will link in the last one created.
7213 test -z "$concat_cmds" || concat_cmds
=$concat_cmds~
7214 eval concat_cmds
=\"\
${concat_cmds}$reload_cmds $objlist $last_robj\"
7215 if test -n "$last_robj"; then
7216 eval concat_cmds
=\"\
${concat_cmds}~\
$RM $last_robj\"
7218 delfiles
="$delfiles $output"
7224 if ${skipped_export-false}; then
7225 func_verbose
"generating symbol list for \`$libname.la'"
7226 export_symbols
="$output_objdir/$libname.exp"
7227 $opt_dry_run ||
$RM $export_symbols
7229 # Append the command to create the export file.
7230 test -z "$concat_cmds" || concat_cmds
=$concat_cmds~
7231 eval concat_cmds
=\"\
$concat_cmds$export_symbols_cmds\"
7232 if test -n "$last_robj"; then
7233 eval concat_cmds
=\"\
$concat_cmds~\
$RM $last_robj\"
7237 test -n "$save_libobjs" &&
7238 func_verbose
"creating a temporary reloadable object file: $output"
7240 # Loop through the commands generated above and execute them.
7241 save_ifs
="$IFS"; IFS
='~'
7242 for cmd
in $concat_cmds; do
7245 func_quote_for_expand
"$cmd"
7246 eval "func_echo $func_quote_for_expand_result"
7248 $opt_dry_run ||
eval "$cmd" ||
{
7251 # Restore the uninstalled library and exit
7252 if test "$mode" = relink
; then
7253 ( cd "$output_objdir" && \
7254 $RM "${realname}T" && \
7255 $MV "${realname}U" "$realname" )
7263 if test -n "$export_symbols_regex" && ${skipped_export-false}; then
7264 func_show_eval
'$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
7265 func_show_eval
'$MV "${export_symbols}T" "$export_symbols"'
7269 if ${skipped_export-false}; then
7270 if test -n "$export_symbols" && test -n "$include_expsyms"; then
7271 tmp_export_symbols
="$export_symbols"
7272 test -n "$orig_export_symbols" && tmp_export_symbols
="$orig_export_symbols"
7273 $opt_dry_run ||
eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
7276 if test -n "$orig_export_symbols"; then
7277 # The given exports_symbols file has to be filtered, so filter it.
7278 func_verbose
"filter symbol list for \`$libname.la' to tag DATA exports"
7279 # FIXME: $output_objdir/$libname.filter potentially contains lots of
7280 # 's' commands which not all seds can handle. GNU sed should be fine
7281 # though. Also, the filter scales superlinearly with the number of
7282 # global variables. join(1) would be nice here, but unfortunately
7283 # isn't a blessed tool.
7284 $opt_dry_run ||
$SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
7285 delfiles
="$delfiles $export_symbols $output_objdir/$libname.filter"
7286 export_symbols
=$output_objdir/$libname.def
7287 $opt_dry_run ||
$SED -f $output_objdir/$libname.filter
< $orig_export_symbols > $export_symbols
7292 # Restore the value of output.
7295 if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
7296 eval libobjs
=\"\
$libobjs $whole_archive_flag_spec\"
7297 test "X$libobjs" = "X " && libobjs
=
7299 # Expand the library linking commands again to reset the
7300 # value of $libobjs for piecewise linking.
7302 # Do each of the archive commands.
7303 if test "$module" = yes && test -n "$module_cmds" ; then
7304 if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
7305 cmds
=$module_expsym_cmds
7310 if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
7311 cmds
=$archive_expsym_cmds
7318 if test -n "$delfiles"; then
7319 # Append the command to remove temporary files to $cmds.
7320 eval cmds
=\"\
$cmds~\
$RM $delfiles\"
7323 # Add any objects from preloaded convenience libraries
7324 if test -n "$dlprefiles"; then
7325 gentop
="$output_objdir/${outputname}x"
7326 generated
="$generated $gentop"
7328 func_extract_archives
$gentop $dlprefiles
7329 libobjs
="$libobjs $func_extract_archives_result"
7330 test "X$libobjs" = "X " && libobjs
=
7333 save_ifs
="$IFS"; IFS
='~'
7334 for cmd
in $cmds; do
7338 func_quote_for_expand
"$cmd"
7339 eval "func_echo $func_quote_for_expand_result"
7341 $opt_dry_run ||
eval "$cmd" ||
{
7344 # Restore the uninstalled library and exit
7345 if test "$mode" = relink
; then
7346 ( cd "$output_objdir" && \
7347 $RM "${realname}T" && \
7348 $MV "${realname}U" "$realname" )
7356 # Restore the uninstalled library and exit
7357 if test "$mode" = relink
; then
7358 $opt_dry_run ||
eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' ||
exit $?
7360 if test -n "$convenience"; then
7361 if test -z "$whole_archive_flag_spec"; then
7362 func_show_eval
'${RM}r "$gentop"'
7369 # Create links to the real library.
7370 for linkname
in $linknames; do
7371 if test "$realname" != "$linkname"; then
7372 func_show_eval
'(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
7376 # If -module or -export-dynamic was specified, set the dlname.
7377 if test "$module" = yes ||
test "$export_dynamic" = yes; then
7378 # On all known operating systems, these are identical.
7385 if test -n "$dlfiles$dlprefiles" ||
test "$dlself" != no
; then
7386 func_warning
"\`-dlopen' is ignored for objects"
7391 func_warning
"\`-l' and \`-L' are ignored for objects" ;;
7394 test -n "$rpath" && \
7395 func_warning
"\`-rpath' is ignored for objects"
7397 test -n "$xrpath" && \
7398 func_warning
"\`-R' is ignored for objects"
7400 test -n "$vinfo" && \
7401 func_warning
"\`-version-info' is ignored for objects"
7403 test -n "$release" && \
7404 func_warning
"\`-release' is ignored for objects"
7408 test -n "$objs$old_deplibs" && \
7409 func_fatal_error
"cannot build library object \`$output' from non-libtool objects"
7413 obj
=$func_lo2o_result
7421 # Delete the old objects.
7422 $opt_dry_run ||
$RM $obj $libobj
7424 # Objects from convenience libraries. This assumes
7425 # single-version convenience libraries. Whenever we create
7426 # different ones for PIC/non-PIC, this we'll have to duplicate
7430 # reload_cmds runs $LD directly, so let us get rid of
7431 # -Wl from whole_archive_flag_spec and hope we can get by with
7432 # turning comma into space..
7435 if test -n "$convenience"; then
7436 if test -n "$whole_archive_flag_spec"; then
7437 eval tmp_whole_archive_flags
=\"$whole_archive_flag_spec\"
7438 reload_conv_objs
=$reload_objs\
`$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
7440 gentop
="$output_objdir/${obj}x"
7441 generated
="$generated $gentop"
7443 func_extract_archives
$gentop $convenience
7444 reload_conv_objs
="$reload_objs $func_extract_archives_result"
7448 # Create the old-style object.
7449 reload_objs
="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
7452 func_execute_cmds
"$reload_cmds" 'exit $?'
7454 # Exit if we aren't doing a library object file.
7455 if test -z "$libobj"; then
7456 if test -n "$gentop"; then
7457 func_show_eval
'${RM}r "$gentop"'
7463 if test "$build_libtool_libs" != yes; then
7464 if test -n "$gentop"; then
7465 func_show_eval
'${RM}r "$gentop"'
7468 # Create an invalid libtool object if no PIC, so that we don't
7469 # accidentally link it into a program.
7470 # $show "echo timestamp > $libobj"
7471 # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
7475 if test -n "$pic_flag" ||
test "$pic_mode" != default
; then
7476 # Only do commands if we really have different PIC objects.
7477 reload_objs
="$libobjs $reload_conv_objs"
7479 func_execute_cmds
"$reload_cmds" 'exit $?'
7482 if test -n "$gentop"; then
7483 func_show_eval
'${RM}r "$gentop"'
7491 *cygwin
*) func_stripname
'' '.exe' "$output"
7492 output
=$func_stripname_result.exe
;;
7494 test -n "$vinfo" && \
7495 func_warning
"\`-version-info' is ignored for programs"
7497 test -n "$release" && \
7498 func_warning
"\`-release' is ignored for programs"
7500 test "$preload" = yes \
7501 && test "$dlopen_support" = unknown \
7502 && test "$dlopen_self" = unknown \
7503 && test "$dlopen_self_static" = unknown
&& \
7504 func_warning
"\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
7507 *-*-rhapsody* |
*-*-darwin1.
[012])
7508 # On Rhapsody replace the C library is the System framework
7509 compile_deplibs
=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
7510 finalize_deplibs
=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
7516 # Don't allow lazy linking, it breaks C++ global constructors
7517 # But is supposedly fixed on 10.4 or later (yay!).
7518 if test "$tagname" = CXX
; then
7519 case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
7521 compile_command
="$compile_command ${wl}-bind_at_load"
7522 finalize_command
="$finalize_command ${wl}-bind_at_load"
7526 # Time to change all our "foo.ltframework" stuff back to "-framework foo"
7527 compile_deplibs
=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7528 finalize_deplibs
=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
7533 # move library search paths that coincide with paths to not yet
7534 # installed libraries to the beginning of the library search list
7536 for path
in $notinst_path; do
7537 case " $new_libs " in
7538 *" -L$path/$objdir "*) ;;
7540 case " $compile_deplibs " in
7541 *" -L$path/$objdir "*)
7542 new_libs
="$new_libs -L$path/$objdir" ;;
7547 for deplib
in $compile_deplibs; do
7550 case " $new_libs " in
7552 *) new_libs
="$new_libs $deplib" ;;
7555 *) new_libs
="$new_libs $deplib" ;;
7558 compile_deplibs
="$new_libs"
7561 compile_command
="$compile_command $compile_deplibs"
7562 finalize_command
="$finalize_command $finalize_deplibs"
7564 if test -n "$rpath$xrpath"; then
7565 # If the user specified any rpath flags, then add them.
7566 for libdir
in $rpath $xrpath; do
7567 # This is the magic to use -rpath.
7568 case "$finalize_rpath " in
7570 *) finalize_rpath
="$finalize_rpath $libdir" ;;
7575 # Now hardcode the library paths
7578 for libdir
in $compile_rpath $finalize_rpath; do
7579 if test -n "$hardcode_libdir_flag_spec"; then
7580 if test -n "$hardcode_libdir_separator"; then
7581 if test -z "$hardcode_libdirs"; then
7582 hardcode_libdirs
="$libdir"
7584 # Just accumulate the unique libdirs.
7585 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
7586 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
7589 hardcode_libdirs
="$hardcode_libdirs$hardcode_libdir_separator$libdir"
7594 eval flag
=\"$hardcode_libdir_flag_spec\"
7595 rpath
="$rpath $flag"
7597 elif test -n "$runpath_var"; then
7598 case "$perm_rpath " in
7600 *) perm_rpath
="$perm_rpath $libdir" ;;
7604 *-*-cygwin* |
*-*-mingw* |
*-*-pw32* |
*-*-os2* |
*-cegcc*)
7605 testbindir
=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
7606 case :$dllsearchpath: in
7608 ::) dllsearchpath
=$libdir;;
7609 *) dllsearchpath
="$dllsearchpath:$libdir";;
7611 case :$dllsearchpath: in
7612 *":$testbindir:"*) ;;
7613 ::) dllsearchpath
=$testbindir;;
7614 *) dllsearchpath
="$dllsearchpath:$testbindir";;
7619 # Substitute the hardcoded libdirs into the rpath.
7620 if test -n "$hardcode_libdir_separator" &&
7621 test -n "$hardcode_libdirs"; then
7622 libdir
="$hardcode_libdirs"
7623 eval rpath
=\" $hardcode_libdir_flag_spec\"
7625 compile_rpath
="$rpath"
7629 for libdir
in $finalize_rpath; do
7630 if test -n "$hardcode_libdir_flag_spec"; then
7631 if test -n "$hardcode_libdir_separator"; then
7632 if test -z "$hardcode_libdirs"; then
7633 hardcode_libdirs
="$libdir"
7635 # Just accumulate the unique libdirs.
7636 case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
7637 *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
7640 hardcode_libdirs
="$hardcode_libdirs$hardcode_libdir_separator$libdir"
7645 eval flag
=\"$hardcode_libdir_flag_spec\"
7646 rpath
="$rpath $flag"
7648 elif test -n "$runpath_var"; then
7649 case "$finalize_perm_rpath " in
7651 *) finalize_perm_rpath
="$finalize_perm_rpath $libdir" ;;
7655 # Substitute the hardcoded libdirs into the rpath.
7656 if test -n "$hardcode_libdir_separator" &&
7657 test -n "$hardcode_libdirs"; then
7658 libdir
="$hardcode_libdirs"
7659 eval rpath
=\" $hardcode_libdir_flag_spec\"
7661 finalize_rpath
="$rpath"
7663 if test -n "$libobjs" && test "$build_old_libs" = yes; then
7664 # Transform all the library objects into standard objects.
7665 compile_command
=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
7666 finalize_command
=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
7669 func_generate_dlsyms
"$outputname" "@PROGRAM@" "no"
7671 # template prelinking step
7672 if test -n "$prelink_cmds"; then
7673 func_execute_cmds
"$prelink_cmds" 'exit $?'
7676 wrappers_required
=yes
7678 *cygwin
* |
*mingw
* )
7679 if test "$build_libtool_libs" != yes; then
7680 wrappers_required
=no
7684 # Disable wrappers for cegcc, we are cross compiling anyway.
7685 wrappers_required
=no
7688 if test "$need_relink" = no ||
test "$build_libtool_libs" != yes; then
7689 wrappers_required
=no
7693 if test "$wrappers_required" = no
; then
7694 # Replace the output file specification.
7695 compile_command
=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
7696 link_command
="$compile_command$compile_rpath"
7698 # We have no uninstalled library dependencies, so finalize right now.
7700 func_show_eval
"$link_command" 'exit_status=$?'
7702 # Delete the generated files.
7703 if test -f "$output_objdir/${outputname}S.${objext}"; then
7704 func_show_eval
'$RM "$output_objdir/${outputname}S.${objext}"'
7710 if test -n "$compile_shlibpath$finalize_shlibpath"; then
7711 compile_command
="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
7713 if test -n "$finalize_shlibpath"; then
7714 finalize_command
="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
7719 if test -n "$runpath_var"; then
7720 if test -n "$perm_rpath"; then
7721 # We should set the runpath_var.
7723 for dir
in $perm_rpath; do
7726 compile_var
="$runpath_var=\"$rpath\$$runpath_var\" "
7728 if test -n "$finalize_perm_rpath"; then
7729 # We should set the runpath_var.
7731 for dir
in $finalize_perm_rpath; do
7734 finalize_var
="$runpath_var=\"$rpath\$$runpath_var\" "
7738 if test "$no_install" = yes; then
7739 # We don't need to create a wrapper script.
7740 link_command
="$compile_var$compile_command$compile_rpath"
7741 # Replace the output file specification.
7742 link_command
=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
7743 # Delete the old output file.
7744 $opt_dry_run ||
$RM $output
7745 # Link the executable and exit
7746 func_show_eval
"$link_command" 'exit $?'
7750 if test "$hardcode_action" = relink
; then
7751 # Fast installation is not supported
7752 link_command
="$compile_var$compile_command$compile_rpath"
7753 relink_command
="$finalize_var$finalize_command$finalize_rpath"
7755 func_warning
"this platform does not like uninstalled shared libraries"
7756 func_warning
"\`$output' will be relinked during installation"
7758 if test "$fast_install" != no
; then
7759 link_command
="$finalize_var$compile_command$finalize_rpath"
7760 if test "$fast_install" = yes; then
7761 relink_command
=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
7763 # fast_install is set to needless
7767 link_command
="$compile_var$compile_command$compile_rpath"
7768 relink_command
="$finalize_var$finalize_command$finalize_rpath"
7772 # Replace the output file specification.
7773 link_command
=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
7775 # Delete the old output files.
7776 $opt_dry_run ||
$RM $output $output_objdir/$outputname $output_objdir/lt-
$outputname
7778 func_show_eval
"$link_command" 'exit $?'
7780 # Now create the wrapper script.
7781 func_verbose
"creating $output"
7783 # Quote the relink command for shipping.
7784 if test -n "$relink_command"; then
7785 # Preserve any variables that may affect compiler behavior
7786 for var
in $variables_saved_for_relink; do
7787 if eval test -z \"\
${$var+set}\"; then
7788 relink_command
="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
7789 elif eval var_value
=\$
$var; test -z "$var_value"; then
7790 relink_command
="$var=; export $var; $relink_command"
7792 func_quote_for_eval
"$var_value"
7793 relink_command
="$var=$func_quote_for_eval_result; export $var; $relink_command"
7796 relink_command
="(cd `pwd`; $relink_command)"
7797 relink_command
=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
7800 # Quote $ECHO for shipping.
7801 if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
7803 [\\/]* |
[A-Za-z
]:[\\/]*) qecho
="$SHELL $progpath --fallback-echo";;
7804 *) qecho
="$SHELL `pwd`/$progpath --fallback-echo";;
7806 qecho
=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
7808 qecho
=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
7811 # Only actually do things if not in dry run mode.
7813 # win32 will think the script is a binary if it has
7814 # a .exe suffix, so we strip it off here.
7816 *.exe
) func_stripname
'' '.exe' "$output"
7817 output
=$func_stripname_result ;;
7819 # test for cygwin because mv fails w/o .exe extensions
7823 func_stripname
'' '.exe' "$outputname"
7824 outputname
=$func_stripname_result ;;
7828 *cygwin
* |
*mingw
* )
7829 func_dirname_and_basename
"$output" "" "."
7830 output_name
=$func_basename_result
7831 output_path
=$func_dirname_result
7832 cwrappersource
="$output_path/$objdir/lt-$output_name.c"
7833 cwrapper
="$output_path/$output_name.exe"
7834 $RM $cwrappersource $cwrapper
7835 trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
7837 func_emit_cwrapperexe_src
> $cwrappersource
7839 # The wrapper executable is built using the $host compiler,
7840 # because it contains $host paths and files. If cross-
7841 # compiling, it, like the target executable, must be
7842 # executed on the $host or under an emulation environment.
7844 $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
7848 # Now, create the wrapper script for func_source use:
7849 func_ltwrapper_scriptname
$cwrapper
7850 $RM $func_ltwrapper_scriptname_result
7851 trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
7853 # note: this script will not be executed, so do not chmod.
7854 if test "x$build" = "x$host" ; then
7855 $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
7857 func_emit_wrapper no
> $func_ltwrapper_scriptname_result
7863 trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
7865 func_emit_wrapper no
> $output
7874 # See if we need to build an old-fashioned archive.
7875 for oldlib
in $oldlibs; do
7877 if test "$build_libtool_libs" = convenience
; then
7878 oldobjs
="$libobjs_save $symfileobj"
7879 addlibs
="$convenience"
7880 build_libtool_libs
=no
7882 if test "$build_libtool_libs" = module
; then
7883 oldobjs
="$libobjs_save"
7884 build_libtool_libs
=no
7886 oldobjs
="$old_deplibs $non_pic_objects"
7887 if test "$preload" = yes && test -f "$symfileobj"; then
7888 oldobjs
="$oldobjs $symfileobj"
7891 addlibs
="$old_convenience"
7894 if test -n "$addlibs"; then
7895 gentop
="$output_objdir/${outputname}x"
7896 generated
="$generated $gentop"
7898 func_extract_archives
$gentop $addlibs
7899 oldobjs
="$oldobjs $func_extract_archives_result"
7902 # Do each command in the archive commands.
7903 if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
7904 cmds
=$old_archive_from_new_cmds
7907 # Add any objects from preloaded convenience libraries
7908 if test -n "$dlprefiles"; then
7909 gentop
="$output_objdir/${outputname}x"
7910 generated
="$generated $gentop"
7912 func_extract_archives
$gentop $dlprefiles
7913 oldobjs
="$oldobjs $func_extract_archives_result"
7916 # POSIX demands no paths to be encoded in archives. We have
7917 # to avoid creating archives with duplicate basenames if we
7918 # might have to extract them afterwards, e.g., when creating a
7919 # static archive out of a convenience library, or when linking
7920 # the entirety of a libtool archive into another (currently
7921 # not supported by libtool).
7922 if (for obj
in $oldobjs
7924 func_basename
"$obj"
7925 $ECHO "$func_basename_result"
7926 done |
sort |
sort -uc >/dev
/null
2>&1); then
7929 $ECHO "copying selected object files to avoid basename conflicts..."
7930 gentop
="$output_objdir/${outputname}x"
7931 generated
="$generated $gentop"
7932 func_mkdir_p
"$gentop"
7933 save_oldobjs
=$oldobjs
7936 for obj
in $save_oldobjs
7938 func_basename
"$obj"
7939 objbase
="$func_basename_result"
7940 case " $oldobjs " in
7941 " ") oldobjs
=$obj ;;
7944 # Make sure we don't pick an alternate name that also
7946 newobj
=lt
$counter-$objbase
7947 func_arith
$counter + 1
7948 counter
=$func_arith_result
7949 case " $oldobjs " in
7950 *[\
/]"$newobj "*) ;;
7951 *) if test ! -f "$gentop/$newobj"; then break; fi ;;
7954 func_show_eval
"ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
7955 oldobjs
="$oldobjs $gentop/$newobj"
7957 *) oldobjs
="$oldobjs $obj" ;;
7961 eval cmds
=\"$old_archive_cmds\"
7964 len
=$func_len_result
7965 if test "$len" -lt "$max_cmd_len" ||
test "$max_cmd_len" -le -1; then
7966 cmds
=$old_archive_cmds
7968 # the command line is too long to link in one step, link in parts
7969 func_verbose
"using piecewise archive linking..."
7974 save_oldobjs
=$oldobjs
7976 # Is there a better way of finding the last object in the list?
7977 for obj
in $save_oldobjs
7981 eval test_cmds
=\"$old_archive_cmds\"
7982 func_len
" $test_cmds"
7983 len0
=$func_len_result
7985 for obj
in $save_oldobjs
7988 func_arith
$len + $func_len_result
7989 len
=$func_arith_result
7990 func_append objlist
" $obj"
7991 if test "$len" -lt "$max_cmd_len"; then
7994 # the above command should be used before it gets too long
7996 if test "$obj" = "$last_oldobj" ; then
7999 test -z "$concat_cmds" || concat_cmds
=$concat_cmds~
8000 eval concat_cmds
=\"\
${concat_cmds}$old_archive_cmds\"
8007 if test "X$oldobjs" = "X" ; then
8008 eval cmds
=\"\
$concat_cmds\"
8010 eval cmds
=\"\
$concat_cmds~\
$old_archive_cmds\"
8014 func_execute_cmds
"$cmds" 'exit $?'
8017 test -n "$generated" && \
8018 func_show_eval
"${RM}r$generated"
8020 # Now create the libtool archive.
8024 test "$build_old_libs" = yes && old_library
="$libname.$libext"
8025 func_verbose
"creating $output"
8027 # Preserve any variables that may affect compiler behavior
8028 for var
in $variables_saved_for_relink; do
8029 if eval test -z \"\
${$var+set}\"; then
8030 relink_command
="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
8031 elif eval var_value
=\$
$var; test -z "$var_value"; then
8032 relink_command
="$var=; export $var; $relink_command"
8034 func_quote_for_eval
"$var_value"
8035 relink_command
="$var=$func_quote_for_eval_result; export $var; $relink_command"
8038 # Quote the link command for shipping.
8039 relink_command
="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
8040 relink_command
=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
8041 if test "$hardcode_automatic" = yes ; then
8045 # Only create the output if not a dry run.
8047 for installed
in no
yes; do
8048 if test "$installed" = yes; then
8049 if test -z "$install_libdir"; then
8052 output
="$output_objdir/$outputname"i
8053 # Replace all uninstalled libtool libraries with the installed ones
8055 for deplib
in $dependency_libs; do
8058 func_basename
"$deplib"
8059 name
="$func_basename_result"
8060 eval libdir
=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
8061 test -z "$libdir" && \
8062 func_fatal_error
"\`$deplib' is not a valid libtool archive"
8063 newdependency_libs
="$newdependency_libs $libdir/$name"
8065 *) newdependency_libs
="$newdependency_libs $deplib" ;;
8068 dependency_libs
="$newdependency_libs"
8071 for lib
in $dlfiles; do
8074 func_basename
"$lib"
8075 name
="$func_basename_result"
8076 eval libdir
=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
8077 test -z "$libdir" && \
8078 func_fatal_error
"\`$lib' is not a valid libtool archive"
8079 newdlfiles
="$newdlfiles $libdir/$name"
8081 *) newdlfiles
="$newdlfiles $lib" ;;
8084 dlfiles
="$newdlfiles"
8086 for lib
in $dlprefiles; do
8089 # Only pass preopened files to the pseudo-archive (for
8090 # eventual linking with the app. that links it) if we
8091 # didn't already link the preopened objects directly into
8093 func_basename
"$lib"
8094 name
="$func_basename_result"
8095 eval libdir
=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
8096 test -z "$libdir" && \
8097 func_fatal_error
"\`$lib' is not a valid libtool archive"
8098 newdlprefiles
="$newdlprefiles $libdir/$name"
8102 dlprefiles
="$newdlprefiles"
8105 for lib
in $dlfiles; do
8107 [\\/]* |
[A-Za-z
]:[\\/]*) abs
="$lib" ;;
8108 *) abs
=`pwd`"/$lib" ;;
8110 newdlfiles
="$newdlfiles $abs"
8112 dlfiles
="$newdlfiles"
8114 for lib
in $dlprefiles; do
8116 [\\/]* |
[A-Za-z
]:[\\/]*) abs
="$lib" ;;
8117 *) abs
=`pwd`"/$lib" ;;
8119 newdlprefiles
="$newdlprefiles $abs"
8121 dlprefiles
="$newdlprefiles"
8124 # place dlname in correct position for cygwin
8126 case $host,$output,$installed,$module,$dlname in
8127 *cygwin
*,*lai
,yes,no
,*.dll |
*mingw
*,*lai
,yes,no
,*.dll |
*cegcc
*,*lai
,yes,no
,*.dll
) tdlname
=..
/bin
/$dlname ;;
8130 # $outputname - a libtool library file
8131 # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
8133 # Please DO NOT delete this file!
8134 # It is necessary for linking the library.
8136 # The name that we can dlopen(3).
8139 # Names of this library.
8140 library_names='$library_names'
8142 # The name of the static archive.
8143 old_library='$old_library'
8145 # Linker flags that can not go in dependency_libs.
8146 inherited_linker_flags='$new_inherited_linker_flags'
8148 # Libraries that this one depends upon.
8149 dependency_libs='$dependency_libs'
8151 # Names of additional weak libraries provided by this library
8152 weak_library_names='$weak_libs'
8154 # Version information for $libname.
8159 # Is this an already installed library?
8160 installed=$installed
8162 # Should we warn about portability when linking against -modules?
8163 shouldnotlink=$module
8165 # Files to dlopen/dlpreopen
8167 dlpreopen='$dlprefiles'
8169 # Directory that this library needs to be installed in:
8170 libdir='$install_libdir'"
8171 if test "$installed" = no
&& test "$need_relink" = yes; then
8173 relink_command=\"$relink_command\""
8178 # Do a symbolic link so that the libtool archive can be found in
8179 # LD_LIBRARY_PATH before the program is installed.
8180 func_show_eval
'( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
8186 { test "$mode" = link ||
test "$mode" = relink
; } &&
8187 func_mode_link
${1+"$@"}
8190 # func_mode_uninstall arg...
8191 func_mode_uninstall
()
8199 # This variable tells wrapper scripts just to set variables rather
8200 # than running their programs.
8201 libtool_install_magic
="$magic"
8206 -f) RM
="$RM $arg"; rmforce
=yes ;;
8207 -*) RM
="$RM $arg" ;;
8208 *) files
="$files $arg" ;;
8213 func_fatal_help
"you must specify an RM program"
8217 origobjdir
="$objdir"
8218 for file in $files; do
8219 func_dirname
"$file" "" "."
8220 dir
="$func_dirname_result"
8221 if test "X$dir" = X.
; then
8222 objdir
="$origobjdir"
8224 objdir
="$dir/$origobjdir"
8226 func_basename
"$file"
8227 name
="$func_basename_result"
8228 test "$mode" = uninstall
&& objdir
="$dir"
8230 # Remember objdir for removal later, being careful to avoid duplicates
8231 if test "$mode" = clean
; then
8234 *) rmdirs
="$rmdirs $objdir" ;;
8238 # Don't error if the file doesn't exist and rm -f was used.
8239 if { test -L "$file"; } >/dev
/null
2>&1 ||
8240 { test -h "$file"; } >/dev
/null
2>&1 ||
8241 test -f "$file"; then
8243 elif test -d "$file"; then
8246 elif test "$rmforce" = yes; then
8254 # Possibly a libtool archive, so verify it.
8255 if func_lalib_p
"$file"; then
8256 func_source
$dir/$name
8258 # Delete the libtool libraries and symlinks.
8259 for n
in $library_names; do
8260 rmfiles
="$rmfiles $objdir/$n"
8262 test -n "$old_library" && rmfiles
="$rmfiles $objdir/$old_library"
8266 case " $library_names " in
8267 # " " in the beginning catches empty $dlname
8269 *) rmfiles
="$rmfiles $objdir/$dlname" ;;
8271 test -n "$libdir" && rmfiles
="$rmfiles $objdir/$name $objdir/${name}i"
8274 if test -n "$library_names"; then
8275 # Do each command in the postuninstall commands.
8276 func_execute_cmds
"$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
8279 if test -n "$old_library"; then
8280 # Do each command in the old_postuninstall commands.
8281 func_execute_cmds
"$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
8283 # FIXME: should reinstall the best remaining shared library.
8290 # Possibly a libtool object, so verify it.
8291 if func_lalib_p
"$file"; then
8294 func_source
$dir/$name
8296 # Add PIC object to the list of files to remove.
8297 if test -n "$pic_object" &&
8298 test "$pic_object" != none
; then
8299 rmfiles
="$rmfiles $dir/$pic_object"
8302 # Add non-PIC object to the list of files to remove.
8303 if test -n "$non_pic_object" &&
8304 test "$non_pic_object" != none
; then
8305 rmfiles
="$rmfiles $dir/$non_pic_object"
8311 if test "$mode" = clean
; then
8315 func_stripname
'' '.exe' "$file"
8316 file=$func_stripname_result
8317 func_stripname
'' '.exe' "$name"
8318 noexename
=$func_stripname_result
8319 # $file with .exe has already been added to rmfiles,
8320 # add $file without .exe
8321 rmfiles
="$rmfiles $file"
8324 # Do a test to see if this is a libtool program.
8325 if func_ltwrapper_p
"$file"; then
8326 if func_ltwrapper_executable_p
"$file"; then
8327 func_ltwrapper_scriptname
"$file"
8329 func_source
$func_ltwrapper_scriptname_result
8330 rmfiles
="$rmfiles $func_ltwrapper_scriptname_result"
8333 func_source
$dir/$noexename
8336 # note $name still contains .exe if it was in $file originally
8337 # as does the version of $file that was added into $rmfiles
8338 rmfiles
="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
8339 if test "$fast_install" = yes && test -n "$relink_command"; then
8340 rmfiles
="$rmfiles $objdir/lt-$name"
8342 if test "X$noexename" != "X$name" ; then
8343 rmfiles
="$rmfiles $objdir/lt-${noexename}.c"
8349 func_show_eval
"$RM $rmfiles" 'exit_status=1'
8351 objdir
="$origobjdir"
8353 # Try to remove the ${objdir}s in the directories where we deleted files
8354 for dir
in $rmdirs; do
8355 if test -d "$dir"; then
8356 func_show_eval
"rmdir $dir >/dev/null 2>&1"
8363 { test "$mode" = uninstall ||
test "$mode" = clean
; } &&
8364 func_mode_uninstall
${1+"$@"}
8366 test -z "$mode" && {
8367 help="$generic_help"
8368 func_fatal_help
"you must specify a MODE"
8371 test -z "$exec_cmd" && \
8372 func_fatal_help
"invalid operation mode \`$mode'"
8374 if test -n "$exec_cmd"; then
8375 eval exec "$exec_cmd"
8382 # The TAGs below are defined such that we never get into a situation
8383 # in which we disable both kinds of libraries. Given conflicting
8384 # choices, we go for a static library, that is the most portable,
8385 # since we can't tell whether shared libraries were disabled because
8386 # the user asked for that or because the platform doesn't support
8387 # them. This is particularly important on AIX, because we don't
8388 # support having both static and shared libraries enabled at the same
8389 # time on that platform, so we default to a shared-only configuration.
8390 # If a disable-shared tag is given, we'll fallback to a static-only
8391 # configuration. But we'll never go from static-only to shared-only.
8393 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
8394 build_libtool_libs
=no
8396 # ### END LIBTOOL TAG CONFIG: disable-shared
8398 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
8399 build_old_libs
=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
8400 # ### END LIBTOOL TAG CONFIG: disable-static