etc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = etc
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps =  \
  41         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
  42         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
  43         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
  44         $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
  45         $(top_srcdir)/config/kernel-bdi.m4 \
  46         $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
  47         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
  48         $(top_srcdir)/config/kernel-bio-failfast.m4 \
  49         $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
  50         $(top_srcdir)/config/kernel-blk-end-request.m4 \
  51         $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
  52         $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
  53         $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
  54         $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
  55         $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
  56         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
  57         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
  58         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
  59         $(top_srcdir)/config/kernel-evict-inode.m4 \
  60         $(top_srcdir)/config/kernel-fmode-t.m4 \
  61         $(top_srcdir)/config/kernel-fsync.m4 \
  62         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
  63         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
  64         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
  65         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
  66         $(top_srcdir)/config/kernel-mount-nodev.m4 \
  67         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
  68         $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
  69         $(top_srcdir)/config/kernel-rq-is_sync.m4 \
  70         $(top_srcdir)/config/kernel-security-inode-init.m4 \
  71         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
  72         $(top_srcdir)/config/kernel-xattr-handler.m4 \
  73         $(top_srcdir)/config/kernel.m4 \
  74         $(top_srcdir)/config/user-arch.m4 \
  75         $(top_srcdir)/config/user-frame-larger-than.m4 \
  76         $(top_srcdir)/config/user-ioctl.m4 \
  77         $(top_srcdir)/config/user-libblkid.m4 \
  78         $(top_srcdir)/config/user-libuuid.m4 \
  79         $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
  80         $(top_srcdir)/config/user-selinux.m4 \
  81         $(top_srcdir)/config/user-udev.m4 \
  82         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
  83         $(top_srcdir)/config/zfs-build.m4 \
  84         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
  85 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  86         $(ACLOCAL_M4)
  87 mkinstalldirs = $(install_sh) -d
  88 CONFIG_HEADER = $(top_builddir)/zfs_config.h
  89 CONFIG_CLEAN_FILES =
  90 CONFIG_CLEAN_VPATH_FILES =
  91 AM_V_GEN = $(am__v_GEN_$(V))
  92 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  93 am__v_GEN_0 = @echo "  GEN   " $@;
  94 AM_V_at = $(am__v_at_$(V))
  95 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  96 am__v_at_0 = @
  97 SOURCES =
  98 DIST_SOURCES =
  99 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 100         html-recursive info-recursive install-data-recursive \
 101         install-dvi-recursive install-exec-recursive \
 102         install-html-recursive install-info-recursive \
 103         install-pdf-recursive install-ps-recursive install-recursive \
 104         installcheck-recursive installdirs-recursive pdf-recursive \
 105         ps-recursive uninstall-recursive
 106 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 107   distclean-recursive maintainer-clean-recursive
 108 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 109         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 110         distdir
 111 ETAGS = etags
 112 CTAGS = ctags
 113 DIST_SUBDIRS = $(SUBDIRS)
 114 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 115 am__relativize = \
 116   dir0=`pwd`; \
 117   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 118   sed_rest='s,^[^/]*/*,,'; \
 119   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 120   sed_butlast='s,/*[^/]*$$,,'; \
 121   while test -n "$$dir1"; do \
 122     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 123     if test "$$first" != "."; then \
 124       if test "$$first" = ".."; then \
 125         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 126         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 127       else \
 128         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 129         if test "$$first2" = "$$first"; then \
 130           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 131         else \
 132           dir2="../$$dir2"; \
 133         fi; \
 134         dir0="$$dir0"/"$$first"; \
 135       fi; \
 136     fi; \
 137     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 138   done; \
 139   reldir="$$dir2"
 140 ACLOCAL = @ACLOCAL@
 141 ALIEN = @ALIEN@
 142 ALIEN_VERSION = @ALIEN_VERSION@
 143 AMTAR = @AMTAR@
 144 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 145 AR = @AR@
 146 AUTOCONF = @AUTOCONF@
 147 AUTOHEADER = @AUTOHEADER@
 148 AUTOMAKE = @AUTOMAKE@
 149 AWK = @AWK@
 150 CC = @CC@
 151 CCAS = @CCAS@
 152 CCASDEPMODE = @CCASDEPMODE@
 153 CCASFLAGS = @CCASFLAGS@
 154 CCDEPMODE = @CCDEPMODE@
 155 CFLAGS = @CFLAGS@
 156 CPP = @CPP@
 157 CPPFLAGS = @CPPFLAGS@
 158 CYGPATH_W = @CYGPATH_W@
 159 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 160 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 161 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
 162 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 163 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 164 DEFS = @DEFS@
 165 DEPDIR = @DEPDIR@
 166 DPKG = @DPKG@
 167 DPKGBUILD = @DPKGBUILD@
 168 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 169 DPKG_VERSION = @DPKG_VERSION@
 170 DSYMUTIL = @DSYMUTIL@
 171 DUMPBIN = @DUMPBIN@
 172 ECHO_C = @ECHO_C@
 173 ECHO_N = @ECHO_N@
 174 ECHO_T = @ECHO_T@
 175 EGREP = @EGREP@
 176 EXEEXT = @EXEEXT@
 177 FGREP = @FGREP@
 178 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 179 GREP = @GREP@
 180 HAVE_ALIEN = @HAVE_ALIEN@
 181 HAVE_DPKG = @HAVE_DPKG@
 182 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 183 HAVE_MAKEPKG = @HAVE_MAKEPKG@
 184 HAVE_PACMAN = @HAVE_PACMAN@
 185 HAVE_RPM = @HAVE_RPM@
 186 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 187 INSTALL = @INSTALL@
 188 INSTALL_DATA = @INSTALL_DATA@
 189 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 190 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 191 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 192 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 193 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 194 LD = @LD@
 195 LDFLAGS = @LDFLAGS@
 196 LIBBLKID = @LIBBLKID@
 197 LIBOBJS = @LIBOBJS@
 198 LIBS = @LIBS@
 199 LIBSELINUX = @LIBSELINUX@
 200 LIBTOOL = @LIBTOOL@
 201 LIBUUID = @LIBUUID@
 202 LINUX = @LINUX@
 203 LINUX_OBJ = @LINUX_OBJ@
 204 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 205 LINUX_VERSION = @LINUX_VERSION@
 206 LIPO = @LIPO@
 207 LN_S = @LN_S@
 208 LTLIBOBJS = @LTLIBOBJS@
 209 MAINT = @MAINT@
 210 MAKEINFO = @MAKEINFO@
 211 MAKEPKG = @MAKEPKG@
 212 MAKEPKG_VERSION = @MAKEPKG_VERSION@
 213 MKDIR_P = @MKDIR_P@
 214 NM = @NM@
 215 NMEDIT = @NMEDIT@
 216 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 217 OBJDUMP = @OBJDUMP@
 218 OBJEXT = @OBJEXT@
 219 OTOOL = @OTOOL@
 220 OTOOL64 = @OTOOL64@
 221 PACKAGE = @PACKAGE@
 222 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 223 PACKAGE_NAME = @PACKAGE_NAME@
 224 PACKAGE_STRING = @PACKAGE_STRING@
 225 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 226 PACKAGE_VERSION = @PACKAGE_VERSION@
 227 PACMAN = @PACMAN@
 228 PACMAN_VERSION = @PACMAN_VERSION@
 229 PATH_SEPARATOR = @PATH_SEPARATOR@
 230 RANLIB = @RANLIB@
 231 RPM = @RPM@
 232 RPMBUILD = @RPMBUILD@
 233 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 234 RPM_VERSION = @RPM_VERSION@
 235 SED = @SED@
 236 SET_MAKE = @SET_MAKE@
 237 SHELL = @SHELL@
 238 SPL = @SPL@
 239 SPL_OBJ = @SPL_OBJ@
 240 SPL_SYMBOLS = @SPL_SYMBOLS@
 241 SPL_VERSION = @SPL_VERSION@
 242 STRIP = @STRIP@
 243 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 244 VENDOR = @VENDOR@
 245 VERSION = @VERSION@
 246 ZFS_CONFIG = @ZFS_CONFIG@
 247 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 248 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 249 ZFS_META_DATA = @ZFS_META_DATA@
 250 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 251 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 252 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 253 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 254 ZFS_META_NAME = @ZFS_META_NAME@
 255 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 256 ZFS_META_VERSION = @ZFS_META_VERSION@
 257 ZLIB = @ZLIB@
 258 abs_builddir = @abs_builddir@
 259 abs_srcdir = @abs_srcdir@
 260 abs_top_builddir = @abs_top_builddir@
 261 abs_top_srcdir = @abs_top_srcdir@
 262 ac_ct_CC = @ac_ct_CC@
 263 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 264 am__include = @am__include@
 265 am__leading_dot = @am__leading_dot@
 266 am__quote = @am__quote@
 267 am__tar = @am__tar@
 268 am__untar = @am__untar@
 269 bindir = @bindir@
 270 build = @build@
 271 build_alias = @build_alias@
 272 build_cpu = @build_cpu@
 273 build_os = @build_os@
 274 build_vendor = @build_vendor@
 275 builddir = @builddir@
 276 datadir = @datadir@
 277 datarootdir = @datarootdir@
 278 docdir = @docdir@
 279 dvidir = @dvidir@
 280 exec_prefix = @exec_prefix@
 281 host = @host@
 282 host_alias = @host_alias@
 283 host_cpu = @host_cpu@
 284 host_os = @host_os@
 285 host_vendor = @host_vendor@
 286 htmldir = @htmldir@
 287 includedir = @includedir@
 288 infodir = @infodir@
 289 install_sh = @install_sh@
 290 libdir = @libdir@
 291 libexecdir = @libexecdir@
 292 localedir = @localedir@
 293 localstatedir = @localstatedir@
 294 lt_ECHO = @lt_ECHO@
 295 mandir = @mandir@
 296 mkdir_p = @mkdir_p@
 297 oldincludedir = @oldincludedir@
 298 pdfdir = @pdfdir@
 299 prefix = @prefix@
 300 program_transform_name = @program_transform_name@
 301 psdir = @psdir@
 302 sbindir = @sbindir@
 303 sharedstatedir = @sharedstatedir@
 304 srcdir = @srcdir@
 305 sysconfdir = @sysconfdir@
 306 target = @target@
 307 target_alias = @target_alias@
 308 target_cpu = @target_cpu@
 309 target_os = @target_os@
 310 target_vendor = @target_vendor@
 311 top_build_prefix = @top_build_prefix@
 312 top_builddir = @top_builddir@
 313 top_srcdir = @top_srcdir@
 314 udevdir = @udevdir@
 315 udevruledir = @udevruledir@
 316 SUBDIRS = init.d zfs
 317 all: all-recursive
 318
 319 .SUFFIXES:
 320 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 321         @for dep in $?; do \
 322           case '$(am__configure_deps)' in \
 323             *$$dep*) \
 324               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 325                 && { if test -f $@; then exit 0; else break; fi; }; \
 326               exit 1;; \
 327           esac; \
 328         done; \
 329         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu etc/Makefile'; \
 330         $(am__cd) $(top_srcdir) && \
 331           $(AUTOMAKE) --gnu etc/Makefile
 332 .PRECIOUS: Makefile
 333 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 334         @case '$?' in \
 335           *config.status*) \
 336             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 337           *) \
 338             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 339             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 340         esac;
 341
 342 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 343         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 344
 345 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 346         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 347 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 348         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 349 $(am__aclocal_m4_deps):
 350
 351 mostlyclean-libtool:
 352         -rm -f *.lo
 353
 354 clean-libtool:
 355         -rm -rf .libs _libs
 356
 357 # This directory's subdirectories are mostly independent; you can cd
 358 # into them and run `make' without going through this Makefile.
 359 # To change the values of `make' variables: instead of editing Makefiles,
 360 # (1) if the variable is set in `config.status', edit `config.status'
 361 #     (which will cause the Makefiles to be regenerated when you run `make');
 362 # (2) otherwise, pass the desired values on the `make' command line.
 363 $(RECURSIVE_TARGETS):
 364         @fail= failcom='exit 1'; \
 365         for f in x $$MAKEFLAGS; do \
 366           case $$f in \
 367             *=* | --[!k]*);; \
 368             *k*) failcom='fail=yes';; \
 369           esac; \
 370         done; \
 371         dot_seen=no; \
 372         target=`echo $@ | sed s/-recursive//`; \
 373         list='$(SUBDIRS)'; for subdir in $$list; do \
 374           echo "Making $$target in $$subdir"; \
 375           if test "$$subdir" = "."; then \
 376             dot_seen=yes; \
 377             local_target="$$target-am"; \
 378           else \
 379             local_target="$$target"; \
 380           fi; \
 381           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 382           || eval $$failcom; \
 383         done; \
 384         if test "$$dot_seen" = "no"; then \
 385           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 386         fi; test -z "$$fail"
 387
 388 $(RECURSIVE_CLEAN_TARGETS):
 389         @fail= failcom='exit 1'; \
 390         for f in x $$MAKEFLAGS; do \
 391           case $$f in \
 392             *=* | --[!k]*);; \
 393             *k*) failcom='fail=yes';; \
 394           esac; \
 395         done; \
 396         dot_seen=no; \
 397         case "$@" in \
 398           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 399           *) list='$(SUBDIRS)' ;; \
 400         esac; \
 401         rev=''; for subdir in $$list; do \
 402           if test "$$subdir" = "."; then :; else \
 403             rev="$$subdir $$rev"; \
 404           fi; \
 405         done; \
 406         rev="$$rev ."; \
 407         target=`echo $@ | sed s/-recursive//`; \
 408         for subdir in $$rev; do \
 409           echo "Making $$target in $$subdir"; \
 410           if test "$$subdir" = "."; then \
 411             local_target="$$target-am"; \
 412           else \
 413             local_target="$$target"; \
 414           fi; \
 415           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 416           || eval $$failcom; \
 417         done && test -z "$$fail"
 418 tags-recursive:
 419         list='$(SUBDIRS)'; for subdir in $$list; do \
 420           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 421         done
 422 ctags-recursive:
 423         list='$(SUBDIRS)'; for subdir in $$list; do \
 424           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 425         done
 426
 427 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 428         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 429         unique=`for i in $$list; do \
 430             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 431           done | \
 432           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 433               END { if (nonempty) { for (i in files) print i; }; }'`; \
 434         mkid -fID $$unique
 435 tags: TAGS
 436
 437 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 438                 $(TAGS_FILES) $(LISP)
 439         set x; \
 440         here=`pwd`; \
 441         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 442           include_option=--etags-include; \
 443           empty_fix=.; \
 444         else \
 445           include_option=--include; \
 446           empty_fix=; \
 447         fi; \
 448         list='$(SUBDIRS)'; for subdir in $$list; do \
 449           if test "$$subdir" = .; then :; else \
 450             test ! -f $$subdir/TAGS || \
 451               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 452           fi; \
 453         done; \
 454         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 455         unique=`for i in $$list; do \
 456             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 457           done | \
 458           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 459               END { if (nonempty) { for (i in files) print i; }; }'`; \
 460         shift; \
 461         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 462           test -n "$$unique" || unique=$$empty_fix; \
 463           if test $$# -gt 0; then \
 464             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 465               "$$@" $$unique; \
 466           else \
 467             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 468               $$unique; \
 469           fi; \
 470         fi
 471 ctags: CTAGS
 472 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 473                 $(TAGS_FILES) $(LISP)
 474         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 475         unique=`for i in $$list; do \
 476             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 477           done | \
 478           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 479               END { if (nonempty) { for (i in files) print i; }; }'`; \
 480         test -z "$(CTAGS_ARGS)$$unique" \
 481           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 482              $$unique
 483
 484 GTAGS:
 485         here=`$(am__cd) $(top_builddir) && pwd` \
 486           && $(am__cd) $(top_srcdir) \
 487           && gtags -i $(GTAGS_ARGS) "$$here"
 488
 489 distclean-tags:
 490         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 491
 492 distdir: $(DISTFILES)
 493         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 494         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 495         list='$(DISTFILES)'; \
 496           dist_files=`for file in $$list; do echo $$file; done | \
 497           sed -e "s|^$$srcdirstrip/||;t" \
 498               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 499         case $$dist_files in \
 500           */*) $(MKDIR_P) `echo "$$dist_files" | \
 501                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 502                            sort -u` ;; \
 503         esac; \
 504         for file in $$dist_files; do \
 505           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 506           if test -d $$d/$$file; then \
 507             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 508             if test -d "$(distdir)/$$file"; then \
 509               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 510             fi; \
 511             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 512               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 513               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 514             fi; \
 515             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 516           else \
 517             test -f "$(distdir)/$$file" \
 518             || cp -p $$d/$$file "$(distdir)/$$file" \
 519             || exit 1; \
 520           fi; \
 521         done
 522         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 523           if test "$$subdir" = .; then :; else \
 524             test -d "$(distdir)/$$subdir" \
 525             || $(MKDIR_P) "$(distdir)/$$subdir" \
 526             || exit 1; \
 527           fi; \
 528         done
 529         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 530           if test "$$subdir" = .; then :; else \
 531             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 532             $(am__relativize); \
 533             new_distdir=$$reldir; \
 534             dir1=$$subdir; dir2="$(top_distdir)"; \
 535             $(am__relativize); \
 536             new_top_distdir=$$reldir; \
 537             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 538             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 539             ($(am__cd) $$subdir && \
 540               $(MAKE) $(AM_MAKEFLAGS) \
 541                 top_distdir="$$new_top_distdir" \
 542                 distdir="$$new_distdir" \
 543                 am__remove_distdir=: \
 544                 am__skip_length_check=: \
 545                 am__skip_mode_fix=: \
 546                 distdir) \
 547               || exit 1; \
 548           fi; \
 549         done
 550 check-am: all-am
 551 check: check-recursive
 552 all-am: Makefile
 553 installdirs: installdirs-recursive
 554 installdirs-am:
 555 install: install-recursive
 556 install-exec: install-exec-recursive
 557 install-data: install-data-recursive
 558 uninstall: uninstall-recursive
 559
 560 install-am: all-am
 561         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 562
 563 installcheck: installcheck-recursive
 564 install-strip:
 565         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 566           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 567           `test -z '$(STRIP)' || \
 568             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 569 mostlyclean-generic:
 570
 571 clean-generic:
 572
 573 distclean-generic:
 574         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 575         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 576
 577 maintainer-clean-generic:
 578         @echo "This command is intended for maintainers to use"
 579         @echo "it deletes files that may require special tools to rebuild."
 580 clean: clean-recursive
 581
 582 clean-am: clean-generic clean-libtool mostlyclean-am
 583
 584 distclean: distclean-recursive
 585         -rm -f Makefile
 586 distclean-am: clean-am distclean-generic distclean-tags
 587
 588 dvi: dvi-recursive
 589
 590 dvi-am:
 591
 592 html: html-recursive
 593
 594 html-am:
 595
 596 info: info-recursive
 597
 598 info-am:
 599
 600 install-data-am:
 601
 602 install-dvi: install-dvi-recursive
 603
 604 install-dvi-am:
 605
 606 install-exec-am:
 607
 608 install-html: install-html-recursive
 609
 610 install-html-am:
 611
 612 install-info: install-info-recursive
 613
 614 install-info-am:
 615
 616 install-man:
 617
 618 install-pdf: install-pdf-recursive
 619
 620 install-pdf-am:
 621
 622 install-ps: install-ps-recursive
 623
 624 install-ps-am:
 625
 626 installcheck-am:
 627
 628 maintainer-clean: maintainer-clean-recursive
 629         -rm -f Makefile
 630 maintainer-clean-am: distclean-am maintainer-clean-generic
 631
 632 mostlyclean: mostlyclean-recursive
 633
 634 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 635
 636 pdf: pdf-recursive
 637
 638 pdf-am:
 639
 640 ps: ps-recursive
 641
 642 ps-am:
 643
 644 uninstall-am:
 645
 646 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 647         install-am install-strip tags-recursive
 648
 649 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 650         all all-am check check-am clean clean-generic clean-libtool \
 651         ctags ctags-recursive distclean distclean-generic \
 652         distclean-libtool distclean-tags distdir dvi dvi-am html \
 653         html-am info info-am install install-am install-data \
 654         install-data-am install-dvi install-dvi-am install-exec \
 655         install-exec-am install-html install-html-am install-info \
 656         install-info-am install-man install-pdf install-pdf-am \
 657         install-ps install-ps-am install-strip installcheck \
 658         installcheck-am installdirs installdirs-am maintainer-clean \
 659         maintainer-clean-generic mostlyclean mostlyclean-generic \
 660         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 661         uninstall uninstall-am
 662
 663
 664 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 665 # Otherwise a system limit (for SysV at least) may be exceeded.
 666 .NOEXPORT: