lib/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = lib
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps =  \
  41         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
  42         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
  43         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
  44         $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
  45         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
  46         $(top_srcdir)/config/kernel-bio-failfast.m4 \
  47         $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
  48         $(top_srcdir)/config/kernel-blk-end-request.m4 \
  49         $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
  50         $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
  51         $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
  52         $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
  53         $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
  54         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
  55         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
  56         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
  57         $(top_srcdir)/config/kernel-evict-inode.m4 \
  58         $(top_srcdir)/config/kernel-fmode-t.m4 \
  59         $(top_srcdir)/config/kernel-fsync.m4 \
  60         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
  61         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
  62         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
  63         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
  64         $(top_srcdir)/config/kernel-mount-nodev.m4 \
  65         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
  66         $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
  67         $(top_srcdir)/config/kernel-rq-is_sync.m4 \
  68         $(top_srcdir)/config/kernel-security-inode-init.m4 \
  69         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
  70         $(top_srcdir)/config/kernel-xattr-handler.m4 \
  71         $(top_srcdir)/config/kernel.m4 \
  72         $(top_srcdir)/config/user-arch.m4 \
  73         $(top_srcdir)/config/user-frame-larger-than.m4 \
  74         $(top_srcdir)/config/user-ioctl.m4 \
  75         $(top_srcdir)/config/user-libblkid.m4 \
  76         $(top_srcdir)/config/user-libuuid.m4 \
  77         $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
  78         $(top_srcdir)/config/user-selinux.m4 \
  79         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
  80         $(top_srcdir)/config/zfs-build.m4 \
  81         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
  82 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  83         $(ACLOCAL_M4)
  84 mkinstalldirs = $(install_sh) -d
  85 CONFIG_HEADER = $(top_builddir)/zfs_config.h
  86 CONFIG_CLEAN_FILES =
  87 CONFIG_CLEAN_VPATH_FILES =
  88 AM_V_GEN = $(am__v_GEN_$(V))
  89 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  90 am__v_GEN_0 = @echo "  GEN   " $@;
  91 AM_V_at = $(am__v_at_$(V))
  92 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  93 am__v_at_0 = @
  94 SOURCES =
  95 DIST_SOURCES =
  96 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  97         html-recursive info-recursive install-data-recursive \
  98         install-dvi-recursive install-exec-recursive \
  99         install-html-recursive install-info-recursive \
 100         install-pdf-recursive install-ps-recursive install-recursive \
 101         installcheck-recursive installdirs-recursive pdf-recursive \
 102         ps-recursive uninstall-recursive
 103 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 104   distclean-recursive maintainer-clean-recursive
 105 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 106         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 107         distdir
 108 ETAGS = etags
 109 CTAGS = ctags
 110 DIST_SUBDIRS = $(SUBDIRS)
 111 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 112 am__relativize = \
 113   dir0=`pwd`; \
 114   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 115   sed_rest='s,^[^/]*/*,,'; \
 116   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 117   sed_butlast='s,/*[^/]*$$,,'; \
 118   while test -n "$$dir1"; do \
 119     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 120     if test "$$first" != "."; then \
 121       if test "$$first" = ".."; then \
 122         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 123         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 124       else \
 125         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 126         if test "$$first2" = "$$first"; then \
 127           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 128         else \
 129           dir2="../$$dir2"; \
 130         fi; \
 131         dir0="$$dir0"/"$$first"; \
 132       fi; \
 133     fi; \
 134     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 135   done; \
 136   reldir="$$dir2"
 137 ACLOCAL = @ACLOCAL@
 138 ALIEN = @ALIEN@
 139 ALIEN_VERSION = @ALIEN_VERSION@
 140 AMTAR = @AMTAR@
 141 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 142 AR = @AR@
 143 AUTOCONF = @AUTOCONF@
 144 AUTOHEADER = @AUTOHEADER@
 145 AUTOMAKE = @AUTOMAKE@
 146 AWK = @AWK@
 147 CC = @CC@
 148 CCAS = @CCAS@
 149 CCASDEPMODE = @CCASDEPMODE@
 150 CCASFLAGS = @CCASFLAGS@
 151 CCDEPMODE = @CCDEPMODE@
 152 CFLAGS = @CFLAGS@
 153 CPP = @CPP@
 154 CPPFLAGS = @CPPFLAGS@
 155 CYGPATH_W = @CYGPATH_W@
 156 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 157 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 158 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 159 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 160 DEFS = @DEFS@
 161 DEPDIR = @DEPDIR@
 162 DPKG = @DPKG@
 163 DPKGBUILD = @DPKGBUILD@
 164 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 165 DPKG_VERSION = @DPKG_VERSION@
 166 DSYMUTIL = @DSYMUTIL@
 167 DUMPBIN = @DUMPBIN@
 168 ECHO_C = @ECHO_C@
 169 ECHO_N = @ECHO_N@
 170 ECHO_T = @ECHO_T@
 171 EGREP = @EGREP@
 172 EXEEXT = @EXEEXT@
 173 FGREP = @FGREP@
 174 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 175 GREP = @GREP@
 176 HAVE_ALIEN = @HAVE_ALIEN@
 177 HAVE_DPKG = @HAVE_DPKG@
 178 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 179 HAVE_RPM = @HAVE_RPM@
 180 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 181 INSTALL = @INSTALL@
 182 INSTALL_DATA = @INSTALL_DATA@
 183 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 184 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 185 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 186 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 187 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 188 LD = @LD@
 189 LDFLAGS = @LDFLAGS@
 190 LIBBLKID = @LIBBLKID@
 191 LIBOBJS = @LIBOBJS@
 192 LIBS = @LIBS@
 193 LIBSELINUX = @LIBSELINUX@
 194 LIBTOOL = @LIBTOOL@
 195 LIBUUID = @LIBUUID@
 196 LINUX = @LINUX@
 197 LINUX_OBJ = @LINUX_OBJ@
 198 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 199 LINUX_VERSION = @LINUX_VERSION@
 200 LIPO = @LIPO@
 201 LN_S = @LN_S@
 202 LTLIBOBJS = @LTLIBOBJS@
 203 MAINT = @MAINT@
 204 MAKEINFO = @MAKEINFO@
 205 MKDIR_P = @MKDIR_P@
 206 NM = @NM@
 207 NMEDIT = @NMEDIT@
 208 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 209 OBJDUMP = @OBJDUMP@
 210 OBJEXT = @OBJEXT@
 211 OTOOL = @OTOOL@
 212 OTOOL64 = @OTOOL64@
 213 PACKAGE = @PACKAGE@
 214 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 215 PACKAGE_NAME = @PACKAGE_NAME@
 216 PACKAGE_STRING = @PACKAGE_STRING@
 217 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 218 PACKAGE_VERSION = @PACKAGE_VERSION@
 219 PATH_SEPARATOR = @PATH_SEPARATOR@
 220 RANLIB = @RANLIB@
 221 RPM = @RPM@
 222 RPMBUILD = @RPMBUILD@
 223 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 224 RPM_VERSION = @RPM_VERSION@
 225 SED = @SED@
 226 SET_MAKE = @SET_MAKE@
 227 SHELL = @SHELL@
 228 SPL = @SPL@
 229 SPL_OBJ = @SPL_OBJ@
 230 SPL_SYMBOLS = @SPL_SYMBOLS@
 231 SPL_VERSION = @SPL_VERSION@
 232 STRIP = @STRIP@
 233 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 234 VENDOR = @VENDOR@
 235 VERSION = @VERSION@
 236 ZFS_CONFIG = @ZFS_CONFIG@
 237 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 238 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 239 ZFS_META_DATA = @ZFS_META_DATA@
 240 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 241 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 242 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 243 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 244 ZFS_META_NAME = @ZFS_META_NAME@
 245 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 246 ZFS_META_VERSION = @ZFS_META_VERSION@
 247 ZLIB = @ZLIB@
 248 abs_builddir = @abs_builddir@
 249 abs_srcdir = @abs_srcdir@
 250 abs_top_builddir = @abs_top_builddir@
 251 abs_top_srcdir = @abs_top_srcdir@
 252 ac_ct_CC = @ac_ct_CC@
 253 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 254 am__include = @am__include@
 255 am__leading_dot = @am__leading_dot@
 256 am__quote = @am__quote@
 257 am__tar = @am__tar@
 258 am__untar = @am__untar@
 259 bindir = @bindir@
 260 build = @build@
 261 build_alias = @build_alias@
 262 build_cpu = @build_cpu@
 263 build_os = @build_os@
 264 build_vendor = @build_vendor@
 265 builddir = @builddir@
 266 datadir = @datadir@
 267 datarootdir = @datarootdir@
 268 docdir = @docdir@
 269 dvidir = @dvidir@
 270 exec_prefix = @exec_prefix@
 271 host = @host@
 272 host_alias = @host_alias@
 273 host_cpu = @host_cpu@
 274 host_os = @host_os@
 275 host_vendor = @host_vendor@
 276 htmldir = @htmldir@
 277 includedir = @includedir@
 278 infodir = @infodir@
 279 install_sh = @install_sh@
 280 libdir = @libdir@
 281 libexecdir = @libexecdir@
 282 localedir = @localedir@
 283 localstatedir = @localstatedir@
 284 lt_ECHO = @lt_ECHO@
 285 mandir = @mandir@
 286 mkdir_p = @mkdir_p@
 287 oldincludedir = @oldincludedir@
 288 pdfdir = @pdfdir@
 289 prefix = @prefix@
 290 program_transform_name = @program_transform_name@
 291 psdir = @psdir@
 292 sbindir = @sbindir@
 293 sharedstatedir = @sharedstatedir@
 294 srcdir = @srcdir@
 295 sysconfdir = @sysconfdir@
 296 target = @target@
 297 target_alias = @target_alias@
 298 target_cpu = @target_cpu@
 299 target_os = @target_os@
 300 target_vendor = @target_vendor@
 301 top_build_prefix = @top_build_prefix@
 302 top_builddir = @top_builddir@
 303 top_srcdir = @top_srcdir@
 304 SUBDIRS = libspl libavl libefi libnvpair libunicode libuutil libzpool libzfs
 305 all: all-recursive
 306
 307 .SUFFIXES:
 308 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 309         @for dep in $?; do \
 310           case '$(am__configure_deps)' in \
 311             *$$dep*) \
 312               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 313                 && { if test -f $@; then exit 0; else break; fi; }; \
 314               exit 1;; \
 315           esac; \
 316         done; \
 317         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
 318         $(am__cd) $(top_srcdir) && \
 319           $(AUTOMAKE) --gnu lib/Makefile
 320 .PRECIOUS: Makefile
 321 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 322         @case '$?' in \
 323           *config.status*) \
 324             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 325           *) \
 326             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 327             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 328         esac;
 329
 330 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 331         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 332
 333 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 334         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 335 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 336         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 337 $(am__aclocal_m4_deps):
 338
 339 mostlyclean-libtool:
 340         -rm -f *.lo
 341
 342 clean-libtool:
 343         -rm -rf .libs _libs
 344
 345 # This directory's subdirectories are mostly independent; you can cd
 346 # into them and run `make' without going through this Makefile.
 347 # To change the values of `make' variables: instead of editing Makefiles,
 348 # (1) if the variable is set in `config.status', edit `config.status'
 349 #     (which will cause the Makefiles to be regenerated when you run `make');
 350 # (2) otherwise, pass the desired values on the `make' command line.
 351 $(RECURSIVE_TARGETS):
 352         @fail= failcom='exit 1'; \
 353         for f in x $$MAKEFLAGS; do \
 354           case $$f in \
 355             *=* | --[!k]*);; \
 356             *k*) failcom='fail=yes';; \
 357           esac; \
 358         done; \
 359         dot_seen=no; \
 360         target=`echo $@ | sed s/-recursive//`; \
 361         list='$(SUBDIRS)'; for subdir in $$list; do \
 362           echo "Making $$target in $$subdir"; \
 363           if test "$$subdir" = "."; then \
 364             dot_seen=yes; \
 365             local_target="$$target-am"; \
 366           else \
 367             local_target="$$target"; \
 368           fi; \
 369           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 370           || eval $$failcom; \
 371         done; \
 372         if test "$$dot_seen" = "no"; then \
 373           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 374         fi; test -z "$$fail"
 375
 376 $(RECURSIVE_CLEAN_TARGETS):
 377         @fail= failcom='exit 1'; \
 378         for f in x $$MAKEFLAGS; do \
 379           case $$f in \
 380             *=* | --[!k]*);; \
 381             *k*) failcom='fail=yes';; \
 382           esac; \
 383         done; \
 384         dot_seen=no; \
 385         case "$@" in \
 386           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 387           *) list='$(SUBDIRS)' ;; \
 388         esac; \
 389         rev=''; for subdir in $$list; do \
 390           if test "$$subdir" = "."; then :; else \
 391             rev="$$subdir $$rev"; \
 392           fi; \
 393         done; \
 394         rev="$$rev ."; \
 395         target=`echo $@ | sed s/-recursive//`; \
 396         for subdir in $$rev; do \
 397           echo "Making $$target in $$subdir"; \
 398           if test "$$subdir" = "."; then \
 399             local_target="$$target-am"; \
 400           else \
 401             local_target="$$target"; \
 402           fi; \
 403           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 404           || eval $$failcom; \
 405         done && test -z "$$fail"
 406 tags-recursive:
 407         list='$(SUBDIRS)'; for subdir in $$list; do \
 408           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 409         done
 410 ctags-recursive:
 411         list='$(SUBDIRS)'; for subdir in $$list; do \
 412           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 413         done
 414
 415 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 416         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 417         unique=`for i in $$list; do \
 418             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 419           done | \
 420           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 421               END { if (nonempty) { for (i in files) print i; }; }'`; \
 422         mkid -fID $$unique
 423 tags: TAGS
 424
 425 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 426                 $(TAGS_FILES) $(LISP)
 427         set x; \
 428         here=`pwd`; \
 429         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 430           include_option=--etags-include; \
 431           empty_fix=.; \
 432         else \
 433           include_option=--include; \
 434           empty_fix=; \
 435         fi; \
 436         list='$(SUBDIRS)'; for subdir in $$list; do \
 437           if test "$$subdir" = .; then :; else \
 438             test ! -f $$subdir/TAGS || \
 439               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 440           fi; \
 441         done; \
 442         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 443         unique=`for i in $$list; do \
 444             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 445           done | \
 446           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 447               END { if (nonempty) { for (i in files) print i; }; }'`; \
 448         shift; \
 449         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 450           test -n "$$unique" || unique=$$empty_fix; \
 451           if test $$# -gt 0; then \
 452             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 453               "$$@" $$unique; \
 454           else \
 455             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 456               $$unique; \
 457           fi; \
 458         fi
 459 ctags: CTAGS
 460 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 461                 $(TAGS_FILES) $(LISP)
 462         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 463         unique=`for i in $$list; do \
 464             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 465           done | \
 466           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 467               END { if (nonempty) { for (i in files) print i; }; }'`; \
 468         test -z "$(CTAGS_ARGS)$$unique" \
 469           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 470              $$unique
 471
 472 GTAGS:
 473         here=`$(am__cd) $(top_builddir) && pwd` \
 474           && $(am__cd) $(top_srcdir) \
 475           && gtags -i $(GTAGS_ARGS) "$$here"
 476
 477 distclean-tags:
 478         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 479
 480 distdir: $(DISTFILES)
 481         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 482         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 483         list='$(DISTFILES)'; \
 484           dist_files=`for file in $$list; do echo $$file; done | \
 485           sed -e "s|^$$srcdirstrip/||;t" \
 486               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 487         case $$dist_files in \
 488           */*) $(MKDIR_P) `echo "$$dist_files" | \
 489                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 490                            sort -u` ;; \
 491         esac; \
 492         for file in $$dist_files; do \
 493           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 494           if test -d $$d/$$file; then \
 495             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 496             if test -d "$(distdir)/$$file"; then \
 497               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 498             fi; \
 499             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 500               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 501               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 502             fi; \
 503             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 504           else \
 505             test -f "$(distdir)/$$file" \
 506             || cp -p $$d/$$file "$(distdir)/$$file" \
 507             || exit 1; \
 508           fi; \
 509         done
 510         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 511           if test "$$subdir" = .; then :; else \
 512             test -d "$(distdir)/$$subdir" \
 513             || $(MKDIR_P) "$(distdir)/$$subdir" \
 514             || exit 1; \
 515           fi; \
 516         done
 517         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 518           if test "$$subdir" = .; then :; else \
 519             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 520             $(am__relativize); \
 521             new_distdir=$$reldir; \
 522             dir1=$$subdir; dir2="$(top_distdir)"; \
 523             $(am__relativize); \
 524             new_top_distdir=$$reldir; \
 525             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 526             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 527             ($(am__cd) $$subdir && \
 528               $(MAKE) $(AM_MAKEFLAGS) \
 529                 top_distdir="$$new_top_distdir" \
 530                 distdir="$$new_distdir" \
 531                 am__remove_distdir=: \
 532                 am__skip_length_check=: \
 533                 am__skip_mode_fix=: \
 534                 distdir) \
 535               || exit 1; \
 536           fi; \
 537         done
 538 check-am: all-am
 539 check: check-recursive
 540 all-am: Makefile
 541 installdirs: installdirs-recursive
 542 installdirs-am:
 543 install: install-recursive
 544 install-exec: install-exec-recursive
 545 install-data: install-data-recursive
 546 uninstall: uninstall-recursive
 547
 548 install-am: all-am
 549         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 550
 551 installcheck: installcheck-recursive
 552 install-strip:
 553         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 554           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 555           `test -z '$(STRIP)' || \
 556             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 557 mostlyclean-generic:
 558
 559 clean-generic:
 560
 561 distclean-generic:
 562         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 563         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 564
 565 maintainer-clean-generic:
 566         @echo "This command is intended for maintainers to use"
 567         @echo "it deletes files that may require special tools to rebuild."
 568 clean: clean-recursive
 569
 570 clean-am: clean-generic clean-libtool mostlyclean-am
 571
 572 distclean: distclean-recursive
 573         -rm -f Makefile
 574 distclean-am: clean-am distclean-generic distclean-tags
 575
 576 dvi: dvi-recursive
 577
 578 dvi-am:
 579
 580 html: html-recursive
 581
 582 html-am:
 583
 584 info: info-recursive
 585
 586 info-am:
 587
 588 install-data-am:
 589
 590 install-dvi: install-dvi-recursive
 591
 592 install-dvi-am:
 593
 594 install-exec-am:
 595
 596 install-html: install-html-recursive
 597
 598 install-html-am:
 599
 600 install-info: install-info-recursive
 601
 602 install-info-am:
 603
 604 install-man:
 605
 606 install-pdf: install-pdf-recursive
 607
 608 install-pdf-am:
 609
 610 install-ps: install-ps-recursive
 611
 612 install-ps-am:
 613
 614 installcheck-am:
 615
 616 maintainer-clean: maintainer-clean-recursive
 617         -rm -f Makefile
 618 maintainer-clean-am: distclean-am maintainer-clean-generic
 619
 620 mostlyclean: mostlyclean-recursive
 621
 622 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 623
 624 pdf: pdf-recursive
 625
 626 pdf-am:
 627
 628 ps: ps-recursive
 629
 630 ps-am:
 631
 632 uninstall-am:
 633
 634 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 635         install-am install-strip tags-recursive
 636
 637 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 638         all all-am check check-am clean clean-generic clean-libtool \
 639         ctags ctags-recursive distclean distclean-generic \
 640         distclean-libtool distclean-tags distdir dvi dvi-am html \
 641         html-am info info-am install install-am install-data \
 642         install-data-am install-dvi install-dvi-am install-exec \
 643         install-exec-am install-html install-html-am install-info \
 644         install-info-am install-man install-pdf install-pdf-am \
 645         install-ps install-ps-am install-strip installcheck \
 646         installcheck-am installdirs installdirs-am maintainer-clean \
 647         maintainer-clean-generic mostlyclean mostlyclean-generic \
 648         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 649         uninstall uninstall-am
 650
 651
 652 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 653 # Otherwise a system limit (for SysV at least) may be exceeded.
 654 .NOEXPORT: