lib/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = lib
  38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps =  \
  41         $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
  42         $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
  43         $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
  44         $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
  45         $(top_srcdir)/config/kernel-bdi.m4 \
  46         $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
  47         $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
  48         $(top_srcdir)/config/kernel-bio-failfast.m4 \
  49         $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
  50         $(top_srcdir)/config/kernel-blk-end-request.m4 \
  51         $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
  52         $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
  53         $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
  54         $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
  55         $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
  56         $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
  57         $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
  58         $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
  59         $(top_srcdir)/config/kernel-evict-inode.m4 \
  60         $(top_srcdir)/config/kernel-fmode-t.m4 \
  61         $(top_srcdir)/config/kernel-fsync.m4 \
  62         $(top_srcdir)/config/kernel-get-disk-ro.m4 \
  63         $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
  64         $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
  65         $(top_srcdir)/config/kernel-kobj-name-len.m4 \
  66         $(top_srcdir)/config/kernel-mount-nodev.m4 \
  67         $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
  68         $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
  69         $(top_srcdir)/config/kernel-rq-is_sync.m4 \
  70         $(top_srcdir)/config/kernel-security-inode-init.m4 \
  71         $(top_srcdir)/config/kernel-set-nlink.m4 \
  72         $(top_srcdir)/config/kernel-shrink.m4 \
  73         $(top_srcdir)/config/kernel-truncate-setsize.m4 \
  74         $(top_srcdir)/config/kernel-xattr-handler.m4 \
  75         $(top_srcdir)/config/kernel.m4 \
  76         $(top_srcdir)/config/user-arch.m4 \
  77         $(top_srcdir)/config/user-frame-larger-than.m4 \
  78         $(top_srcdir)/config/user-ioctl.m4 \
  79         $(top_srcdir)/config/user-libblkid.m4 \
  80         $(top_srcdir)/config/user-libuuid.m4 \
  81         $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
  82         $(top_srcdir)/config/user-selinux.m4 \
  83         $(top_srcdir)/config/user-udev.m4 \
  84         $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
  85         $(top_srcdir)/config/zfs-build.m4 \
  86         $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
  87 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  88         $(ACLOCAL_M4)
  89 mkinstalldirs = $(install_sh) -d
  90 CONFIG_HEADER = $(top_builddir)/zfs_config.h
  91 CONFIG_CLEAN_FILES =
  92 CONFIG_CLEAN_VPATH_FILES =
  93 AM_V_GEN = $(am__v_GEN_$(V))
  94 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
  95 am__v_GEN_0 = @echo "  GEN   " $@;
  96 AM_V_at = $(am__v_at_$(V))
  97 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
  98 am__v_at_0 = @
  99 SOURCES =
 100 DIST_SOURCES =
 101 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 102         html-recursive info-recursive install-data-recursive \
 103         install-dvi-recursive install-exec-recursive \
 104         install-html-recursive install-info-recursive \
 105         install-pdf-recursive install-ps-recursive install-recursive \
 106         installcheck-recursive installdirs-recursive pdf-recursive \
 107         ps-recursive uninstall-recursive
 108 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 109   distclean-recursive maintainer-clean-recursive
 110 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 111         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 112         distdir
 113 ETAGS = etags
 114 CTAGS = ctags
 115 DIST_SUBDIRS = $(SUBDIRS)
 116 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 117 am__relativize = \
 118   dir0=`pwd`; \
 119   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 120   sed_rest='s,^[^/]*/*,,'; \
 121   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 122   sed_butlast='s,/*[^/]*$$,,'; \
 123   while test -n "$$dir1"; do \
 124     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 125     if test "$$first" != "."; then \
 126       if test "$$first" = ".."; then \
 127         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 128         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 129       else \
 130         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 131         if test "$$first2" = "$$first"; then \
 132           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 133         else \
 134           dir2="../$$dir2"; \
 135         fi; \
 136         dir0="$$dir0"/"$$first"; \
 137       fi; \
 138     fi; \
 139     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 140   done; \
 141   reldir="$$dir2"
 142 ACLOCAL = @ACLOCAL@
 143 ALIEN = @ALIEN@
 144 ALIEN_VERSION = @ALIEN_VERSION@
 145 AMTAR = @AMTAR@
 146 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 147 AR = @AR@
 148 AUTOCONF = @AUTOCONF@
 149 AUTOHEADER = @AUTOHEADER@
 150 AUTOMAKE = @AUTOMAKE@
 151 AWK = @AWK@
 152 CC = @CC@
 153 CCAS = @CCAS@
 154 CCASDEPMODE = @CCASDEPMODE@
 155 CCASFLAGS = @CCASFLAGS@
 156 CCDEPMODE = @CCDEPMODE@
 157 CFLAGS = @CFLAGS@
 158 CPP = @CPP@
 159 CPPFLAGS = @CPPFLAGS@
 160 CYGPATH_W = @CYGPATH_W@
 161 DEBUG_CFLAGS = @DEBUG_CFLAGS@
 162 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
 163 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
 164 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
 165 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
 166 DEFS = @DEFS@
 167 DEPDIR = @DEPDIR@
 168 DPKG = @DPKG@
 169 DPKGBUILD = @DPKGBUILD@
 170 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
 171 DPKG_VERSION = @DPKG_VERSION@
 172 DSYMUTIL = @DSYMUTIL@
 173 DUMPBIN = @DUMPBIN@
 174 ECHO_C = @ECHO_C@
 175 ECHO_N = @ECHO_N@
 176 ECHO_T = @ECHO_T@
 177 EGREP = @EGREP@
 178 EXEEXT = @EXEEXT@
 179 FGREP = @FGREP@
 180 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
 181 GREP = @GREP@
 182 HAVE_ALIEN = @HAVE_ALIEN@
 183 HAVE_DPKG = @HAVE_DPKG@
 184 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
 185 HAVE_MAKEPKG = @HAVE_MAKEPKG@
 186 HAVE_PACMAN = @HAVE_PACMAN@
 187 HAVE_RPM = @HAVE_RPM@
 188 HAVE_RPMBUILD = @HAVE_RPMBUILD@
 189 INSTALL = @INSTALL@
 190 INSTALL_DATA = @INSTALL_DATA@
 191 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 192 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 193 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 194 KERNELCPPFLAGS = @KERNELCPPFLAGS@
 195 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
 196 LD = @LD@
 197 LDFLAGS = @LDFLAGS@
 198 LIBBLKID = @LIBBLKID@
 199 LIBOBJS = @LIBOBJS@
 200 LIBS = @LIBS@
 201 LIBSELINUX = @LIBSELINUX@
 202 LIBTOOL = @LIBTOOL@
 203 LIBUUID = @LIBUUID@
 204 LINUX = @LINUX@
 205 LINUX_OBJ = @LINUX_OBJ@
 206 LINUX_SYMBOLS = @LINUX_SYMBOLS@
 207 LINUX_VERSION = @LINUX_VERSION@
 208 LIPO = @LIPO@
 209 LN_S = @LN_S@
 210 LTLIBOBJS = @LTLIBOBJS@
 211 MAINT = @MAINT@
 212 MAKEINFO = @MAKEINFO@
 213 MAKEPKG = @MAKEPKG@
 214 MAKEPKG_VERSION = @MAKEPKG_VERSION@
 215 MKDIR_P = @MKDIR_P@
 216 NM = @NM@
 217 NMEDIT = @NMEDIT@
 218 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
 219 OBJDUMP = @OBJDUMP@
 220 OBJEXT = @OBJEXT@
 221 OTOOL = @OTOOL@
 222 OTOOL64 = @OTOOL64@
 223 PACKAGE = @PACKAGE@
 224 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 225 PACKAGE_NAME = @PACKAGE_NAME@
 226 PACKAGE_STRING = @PACKAGE_STRING@
 227 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 228 PACKAGE_VERSION = @PACKAGE_VERSION@
 229 PACMAN = @PACMAN@
 230 PACMAN_VERSION = @PACMAN_VERSION@
 231 PATH_SEPARATOR = @PATH_SEPARATOR@
 232 RANLIB = @RANLIB@
 233 RPM = @RPM@
 234 RPMBUILD = @RPMBUILD@
 235 RPMBUILD_VERSION = @RPMBUILD_VERSION@
 236 RPM_VERSION = @RPM_VERSION@
 237 SED = @SED@
 238 SET_MAKE = @SET_MAKE@
 239 SHELL = @SHELL@
 240 SPL = @SPL@
 241 SPL_OBJ = @SPL_OBJ@
 242 SPL_SYMBOLS = @SPL_SYMBOLS@
 243 SPL_VERSION = @SPL_VERSION@
 244 STRIP = @STRIP@
 245 TARGET_ASM_DIR = @TARGET_ASM_DIR@
 246 VENDOR = @VENDOR@
 247 VERSION = @VERSION@
 248 ZFS_CONFIG = @ZFS_CONFIG@
 249 ZFS_META_ALIAS = @ZFS_META_ALIAS@
 250 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
 251 ZFS_META_DATA = @ZFS_META_DATA@
 252 ZFS_META_LICENSE = @ZFS_META_LICENSE@
 253 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
 254 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
 255 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
 256 ZFS_META_NAME = @ZFS_META_NAME@
 257 ZFS_META_RELEASE = @ZFS_META_RELEASE@
 258 ZFS_META_VERSION = @ZFS_META_VERSION@
 259 ZLIB = @ZLIB@
 260 abs_builddir = @abs_builddir@
 261 abs_srcdir = @abs_srcdir@
 262 abs_top_builddir = @abs_top_builddir@
 263 abs_top_srcdir = @abs_top_srcdir@
 264 ac_ct_CC = @ac_ct_CC@
 265 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 266 am__include = @am__include@
 267 am__leading_dot = @am__leading_dot@
 268 am__quote = @am__quote@
 269 am__tar = @am__tar@
 270 am__untar = @am__untar@
 271 bindir = @bindir@
 272 build = @build@
 273 build_alias = @build_alias@
 274 build_cpu = @build_cpu@
 275 build_os = @build_os@
 276 build_vendor = @build_vendor@
 277 builddir = @builddir@
 278 datadir = @datadir@
 279 datarootdir = @datarootdir@
 280 docdir = @docdir@
 281 dvidir = @dvidir@
 282 exec_prefix = @exec_prefix@
 283 host = @host@
 284 host_alias = @host_alias@
 285 host_cpu = @host_cpu@
 286 host_os = @host_os@
 287 host_vendor = @host_vendor@
 288 htmldir = @htmldir@
 289 includedir = @includedir@
 290 infodir = @infodir@
 291 install_sh = @install_sh@
 292 libdir = @libdir@
 293 libexecdir = @libexecdir@
 294 localedir = @localedir@
 295 localstatedir = @localstatedir@
 296 lt_ECHO = @lt_ECHO@
 297 mandir = @mandir@
 298 mkdir_p = @mkdir_p@
 299 oldincludedir = @oldincludedir@
 300 pdfdir = @pdfdir@
 301 prefix = @prefix@
 302 program_transform_name = @program_transform_name@
 303 psdir = @psdir@
 304 sbindir = @sbindir@
 305 sharedstatedir = @sharedstatedir@
 306 srcdir = @srcdir@
 307 sysconfdir = @sysconfdir@
 308 target = @target@
 309 target_alias = @target_alias@
 310 target_cpu = @target_cpu@
 311 target_os = @target_os@
 312 target_vendor = @target_vendor@
 313 top_build_prefix = @top_build_prefix@
 314 top_builddir = @top_builddir@
 315 top_srcdir = @top_srcdir@
 316 udevdir = @udevdir@
 317 udevruledir = @udevruledir@
 318
 319 # NB: GNU Automake Manual, Chapter 8.3.5: Libtool Convenience Libraries
 320 # These five libraries are intermediary build components.
 321
 322 # These four libraries, which are installed as the final build product,
 323 # incorporate the five convenience libraries given above.
 324 SUBDIRS = libspl libavl libefi libshare libunicode libnvpair libuutil \
 325         libzpool libzfs
 326 all: all-recursive
 327
 328 .SUFFIXES:
 329 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 330         @for dep in $?; do \
 331           case '$(am__configure_deps)' in \
 332             *$$dep*) \
 333               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 334                 && { if test -f $@; then exit 0; else break; fi; }; \
 335               exit 1;; \
 336           esac; \
 337         done; \
 338         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
 339         $(am__cd) $(top_srcdir) && \
 340           $(AUTOMAKE) --gnu lib/Makefile
 341 .PRECIOUS: Makefile
 342 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 343         @case '$?' in \
 344           *config.status*) \
 345             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 346           *) \
 347             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 348             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 349         esac;
 350
 351 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 352         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 353
 354 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 355         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 356 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 357         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 358 $(am__aclocal_m4_deps):
 359
 360 mostlyclean-libtool:
 361         -rm -f *.lo
 362
 363 clean-libtool:
 364         -rm -rf .libs _libs
 365
 366 # This directory's subdirectories are mostly independent; you can cd
 367 # into them and run `make' without going through this Makefile.
 368 # To change the values of `make' variables: instead of editing Makefiles,
 369 # (1) if the variable is set in `config.status', edit `config.status'
 370 #     (which will cause the Makefiles to be regenerated when you run `make');
 371 # (2) otherwise, pass the desired values on the `make' command line.
 372 $(RECURSIVE_TARGETS):
 373         @fail= failcom='exit 1'; \
 374         for f in x $$MAKEFLAGS; do \
 375           case $$f in \
 376             *=* | --[!k]*);; \
 377             *k*) failcom='fail=yes';; \
 378           esac; \
 379         done; \
 380         dot_seen=no; \
 381         target=`echo $@ | sed s/-recursive//`; \
 382         list='$(SUBDIRS)'; for subdir in $$list; do \
 383           echo "Making $$target in $$subdir"; \
 384           if test "$$subdir" = "."; then \
 385             dot_seen=yes; \
 386             local_target="$$target-am"; \
 387           else \
 388             local_target="$$target"; \
 389           fi; \
 390           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 391           || eval $$failcom; \
 392         done; \
 393         if test "$$dot_seen" = "no"; then \
 394           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 395         fi; test -z "$$fail"
 396
 397 $(RECURSIVE_CLEAN_TARGETS):
 398         @fail= failcom='exit 1'; \
 399         for f in x $$MAKEFLAGS; do \
 400           case $$f in \
 401             *=* | --[!k]*);; \
 402             *k*) failcom='fail=yes';; \
 403           esac; \
 404         done; \
 405         dot_seen=no; \
 406         case "$@" in \
 407           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 408           *) list='$(SUBDIRS)' ;; \
 409         esac; \
 410         rev=''; for subdir in $$list; do \
 411           if test "$$subdir" = "."; then :; else \
 412             rev="$$subdir $$rev"; \
 413           fi; \
 414         done; \
 415         rev="$$rev ."; \
 416         target=`echo $@ | sed s/-recursive//`; \
 417         for subdir in $$rev; do \
 418           echo "Making $$target in $$subdir"; \
 419           if test "$$subdir" = "."; then \
 420             local_target="$$target-am"; \
 421           else \
 422             local_target="$$target"; \
 423           fi; \
 424           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 425           || eval $$failcom; \
 426         done && test -z "$$fail"
 427 tags-recursive:
 428         list='$(SUBDIRS)'; for subdir in $$list; do \
 429           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 430         done
 431 ctags-recursive:
 432         list='$(SUBDIRS)'; for subdir in $$list; do \
 433           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 434         done
 435
 436 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 437         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 438         unique=`for i in $$list; do \
 439             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 440           done | \
 441           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 442               END { if (nonempty) { for (i in files) print i; }; }'`; \
 443         mkid -fID $$unique
 444 tags: TAGS
 445
 446 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 447                 $(TAGS_FILES) $(LISP)
 448         set x; \
 449         here=`pwd`; \
 450         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 451           include_option=--etags-include; \
 452           empty_fix=.; \
 453         else \
 454           include_option=--include; \
 455           empty_fix=; \
 456         fi; \
 457         list='$(SUBDIRS)'; for subdir in $$list; do \
 458           if test "$$subdir" = .; then :; else \
 459             test ! -f $$subdir/TAGS || \
 460               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 461           fi; \
 462         done; \
 463         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 464         unique=`for i in $$list; do \
 465             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 466           done | \
 467           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 468               END { if (nonempty) { for (i in files) print i; }; }'`; \
 469         shift; \
 470         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 471           test -n "$$unique" || unique=$$empty_fix; \
 472           if test $$# -gt 0; then \
 473             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 474               "$$@" $$unique; \
 475           else \
 476             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 477               $$unique; \
 478           fi; \
 479         fi
 480 ctags: CTAGS
 481 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 482                 $(TAGS_FILES) $(LISP)
 483         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 484         unique=`for i in $$list; do \
 485             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 486           done | \
 487           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 488               END { if (nonempty) { for (i in files) print i; }; }'`; \
 489         test -z "$(CTAGS_ARGS)$$unique" \
 490           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 491              $$unique
 492
 493 GTAGS:
 494         here=`$(am__cd) $(top_builddir) && pwd` \
 495           && $(am__cd) $(top_srcdir) \
 496           && gtags -i $(GTAGS_ARGS) "$$here"
 497
 498 distclean-tags:
 499         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 500
 501 distdir: $(DISTFILES)
 502         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 503         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 504         list='$(DISTFILES)'; \
 505           dist_files=`for file in $$list; do echo $$file; done | \
 506           sed -e "s|^$$srcdirstrip/||;t" \
 507               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 508         case $$dist_files in \
 509           */*) $(MKDIR_P) `echo "$$dist_files" | \
 510                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 511                            sort -u` ;; \
 512         esac; \
 513         for file in $$dist_files; do \
 514           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 515           if test -d $$d/$$file; then \
 516             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 517             if test -d "$(distdir)/$$file"; then \
 518               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 519             fi; \
 520             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 521               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 522               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 523             fi; \
 524             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 525           else \
 526             test -f "$(distdir)/$$file" \
 527             || cp -p $$d/$$file "$(distdir)/$$file" \
 528             || exit 1; \
 529           fi; \
 530         done
 531         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 532           if test "$$subdir" = .; then :; else \
 533             test -d "$(distdir)/$$subdir" \
 534             || $(MKDIR_P) "$(distdir)/$$subdir" \
 535             || exit 1; \
 536           fi; \
 537         done
 538         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 539           if test "$$subdir" = .; then :; else \
 540             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 541             $(am__relativize); \
 542             new_distdir=$$reldir; \
 543             dir1=$$subdir; dir2="$(top_distdir)"; \
 544             $(am__relativize); \
 545             new_top_distdir=$$reldir; \
 546             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 547             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 548             ($(am__cd) $$subdir && \
 549               $(MAKE) $(AM_MAKEFLAGS) \
 550                 top_distdir="$$new_top_distdir" \
 551                 distdir="$$new_distdir" \
 552                 am__remove_distdir=: \
 553                 am__skip_length_check=: \
 554                 am__skip_mode_fix=: \
 555                 distdir) \
 556               || exit 1; \
 557           fi; \
 558         done
 559 check-am: all-am
 560 check: check-recursive
 561 all-am: Makefile
 562 installdirs: installdirs-recursive
 563 installdirs-am:
 564 install: install-recursive
 565 install-exec: install-exec-recursive
 566 install-data: install-data-recursive
 567 uninstall: uninstall-recursive
 568
 569 install-am: all-am
 570         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 571
 572 installcheck: installcheck-recursive
 573 install-strip:
 574         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 575           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 576           `test -z '$(STRIP)' || \
 577             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 578 mostlyclean-generic:
 579
 580 clean-generic:
 581
 582 distclean-generic:
 583         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 584         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 585
 586 maintainer-clean-generic:
 587         @echo "This command is intended for maintainers to use"
 588         @echo "it deletes files that may require special tools to rebuild."
 589 clean: clean-recursive
 590
 591 clean-am: clean-generic clean-libtool mostlyclean-am
 592
 593 distclean: distclean-recursive
 594         -rm -f Makefile
 595 distclean-am: clean-am distclean-generic distclean-tags
 596
 597 dvi: dvi-recursive
 598
 599 dvi-am:
 600
 601 html: html-recursive
 602
 603 html-am:
 604
 605 info: info-recursive
 606
 607 info-am:
 608
 609 install-data-am:
 610
 611 install-dvi: install-dvi-recursive
 612
 613 install-dvi-am:
 614
 615 install-exec-am:
 616
 617 install-html: install-html-recursive
 618
 619 install-html-am:
 620
 621 install-info: install-info-recursive
 622
 623 install-info-am:
 624
 625 install-man:
 626
 627 install-pdf: install-pdf-recursive
 628
 629 install-pdf-am:
 630
 631 install-ps: install-ps-recursive
 632
 633 install-ps-am:
 634
 635 installcheck-am:
 636
 637 maintainer-clean: maintainer-clean-recursive
 638         -rm -f Makefile
 639 maintainer-clean-am: distclean-am maintainer-clean-generic
 640
 641 mostlyclean: mostlyclean-recursive
 642
 643 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 644
 645 pdf: pdf-recursive
 646
 647 pdf-am:
 648
 649 ps: ps-recursive
 650
 651 ps-am:
 652
 653 uninstall-am:
 654
 655 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 656         install-am install-strip tags-recursive
 657
 658 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 659         all all-am check check-am clean clean-generic clean-libtool \
 660         ctags ctags-recursive distclean distclean-generic \
 661         distclean-libtool distclean-tags distdir dvi dvi-am html \
 662         html-am info info-am install install-am install-data \
 663         install-data-am install-dvi install-dvi-am install-exec \
 664         install-exec-am install-html install-html-am install-info \
 665         install-info-am install-man install-pdf install-pdf-am \
 666         install-ps install-ps-am install-strip installcheck \
 667         installcheck-am installdirs installdirs-am maintainer-clean \
 668         maintainer-clean-generic mostlyclean mostlyclean-generic \
 669         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 670         uninstall uninstall-am
 671
 672
 673 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 674 # Otherwise a system limit (for SysV at least) may be exceeded.
 675 .NOEXPORT: