4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright (c) 2012 by Delphix. All rights reserved.
28 * Virtual Device Labels
29 * ---------------------
31 * The vdev label serves several distinct purposes:
33 * 1. Uniquely identify this device as part of a ZFS pool and confirm its
34 * identity within the pool.
36 * 2. Verify that all the devices given in a configuration are present
39 * 3. Determine the uberblock for the pool.
41 * 4. In case of an import operation, determine the configuration of the
42 * toplevel vdev of which it is a part.
44 * 5. If an import operation cannot find all the devices in the pool,
45 * provide enough information to the administrator to determine which
46 * devices are missing.
48 * It is important to note that while the kernel is responsible for writing the
49 * label, it only consumes the information in the first three cases. The
50 * latter information is only consumed in userland when determining the
51 * configuration to import a pool.
57 * Before describing the contents of the label, it's important to understand how
58 * the labels are written and updated with respect to the uberblock.
60 * When the pool configuration is altered, either because it was newly created
61 * or a device was added, we want to update all the labels such that we can deal
62 * with fatal failure at any point. To this end, each disk has two labels which
63 * are updated before and after the uberblock is synced. Assuming we have
64 * labels and an uberblock with the following transaction groups:
67 * +------+ +------+ +------+
69 * | t10 | | t10 | | t10 |
71 * +------+ +------+ +------+
73 * In this stable state, the labels and the uberblock were all updated within
74 * the same transaction group (10). Each label is mirrored and checksummed, so
75 * that we can detect when we fail partway through writing the label.
77 * In order to identify which labels are valid, the labels are written in the
80 * 1. For each vdev, update 'L1' to the new label
81 * 2. Update the uberblock
82 * 3. For each vdev, update 'L2' to the new label
84 * Given arbitrary failure, we can determine the correct label to use based on
85 * the transaction group. If we fail after updating L1 but before updating the
86 * UB, we will notice that L1's transaction group is greater than the uberblock,
87 * so L2 must be valid. If we fail after writing the uberblock but before
88 * writing L2, we will notice that L2's transaction group is less than L1, and
89 * therefore L1 is valid.
91 * Another added complexity is that not every label is updated when the config
92 * is synced. If we add a single device, we do not want to have to re-write
93 * every label for every device in the pool. This means that both L1 and L2 may
94 * be older than the pool uberblock, because the necessary information is stored
101 * The vdev label consists of two distinct parts, and is wrapped within the
102 * vdev_label_t structure. The label includes 8k of padding to permit legacy
103 * VTOC disk labels, but is otherwise ignored.
105 * The first half of the label is a packed nvlist which contains pool wide
106 * properties, per-vdev properties, and configuration information. It is
107 * described in more detail below.
109 * The latter half of the label consists of a redundant array of uberblocks.
110 * These uberblocks are updated whenever a transaction group is committed,
111 * or when the configuration is updated. When a pool is loaded, we scan each
112 * vdev for the 'best' uberblock.
115 * Configuration Information
116 * -------------------------
118 * The nvlist describing the pool and vdev contains the following elements:
120 * version ZFS on-disk version
123 * txg Transaction group in which this label was written
124 * pool_guid Unique identifier for this pool
125 * vdev_tree An nvlist describing vdev tree.
127 * An nvlist of the features necessary for reading the MOS.
129 * Each leaf device label also contains the following:
131 * top_guid Unique ID for top-level vdev in which this is contained
132 * guid Unique ID for the leaf vdev
134 * The 'vs' configuration follows the format described in 'spa_config.c'.
137 #include <sys/zfs_context.h>
139 #include <sys/spa_impl.h>
142 #include <sys/vdev.h>
143 #include <sys/vdev_impl.h>
144 #include <sys/uberblock_impl.h>
145 #include <sys/metaslab.h>
147 #include <sys/dsl_scan.h>
148 #include <sys/fs/zfs.h>
151 * Basic routines to read and write from a vdev label.
152 * Used throughout the rest of this file.
155 vdev_label_offset(uint64_t psize
, int l
, uint64_t offset
)
157 ASSERT(offset
< sizeof (vdev_label_t
));
158 ASSERT(P2PHASE_TYPED(psize
, sizeof (vdev_label_t
), uint64_t) == 0);
160 return (offset
+ l
* sizeof (vdev_label_t
) + (l
< VDEV_LABELS
/ 2 ?
161 0 : psize
- VDEV_LABELS
* sizeof (vdev_label_t
)));
165 * Returns back the vdev label associated with the passed in offset.
168 vdev_label_number(uint64_t psize
, uint64_t offset
)
172 if (offset
>= psize
- VDEV_LABEL_END_SIZE
) {
173 offset
-= psize
- VDEV_LABEL_END_SIZE
;
174 offset
+= (VDEV_LABELS
/ 2) * sizeof (vdev_label_t
);
176 l
= offset
/ sizeof (vdev_label_t
);
177 return (l
< VDEV_LABELS
? l
: -1);
181 vdev_label_read(zio_t
*zio
, vdev_t
*vd
, int l
, void *buf
, uint64_t offset
,
182 uint64_t size
, zio_done_func_t
*done
, void *private, int flags
)
184 ASSERT(spa_config_held(zio
->io_spa
, SCL_STATE_ALL
, RW_WRITER
) ==
186 ASSERT(flags
& ZIO_FLAG_CONFIG_WRITER
);
188 zio_nowait(zio_read_phys(zio
, vd
,
189 vdev_label_offset(vd
->vdev_psize
, l
, offset
),
190 size
, buf
, ZIO_CHECKSUM_LABEL
, done
, private,
191 ZIO_PRIORITY_SYNC_READ
, flags
, B_TRUE
));
195 vdev_label_write(zio_t
*zio
, vdev_t
*vd
, int l
, void *buf
, uint64_t offset
,
196 uint64_t size
, zio_done_func_t
*done
, void *private, int flags
)
198 ASSERT(spa_config_held(zio
->io_spa
, SCL_ALL
, RW_WRITER
) == SCL_ALL
||
199 (spa_config_held(zio
->io_spa
, SCL_CONFIG
| SCL_STATE
, RW_READER
) ==
200 (SCL_CONFIG
| SCL_STATE
) &&
201 dsl_pool_sync_context(spa_get_dsl(zio
->io_spa
))));
202 ASSERT(flags
& ZIO_FLAG_CONFIG_WRITER
);
204 zio_nowait(zio_write_phys(zio
, vd
,
205 vdev_label_offset(vd
->vdev_psize
, l
, offset
),
206 size
, buf
, ZIO_CHECKSUM_LABEL
, done
, private,
207 ZIO_PRIORITY_SYNC_WRITE
, flags
, B_TRUE
));
211 * Generate the nvlist representing this vdev's config.
214 vdev_config_generate(spa_t
*spa
, vdev_t
*vd
, boolean_t getstats
,
215 vdev_config_flag_t flags
)
219 VERIFY(nvlist_alloc(&nv
, NV_UNIQUE_NAME
, KM_PUSHPAGE
) == 0);
221 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_TYPE
,
222 vd
->vdev_ops
->vdev_op_type
) == 0);
223 if (!(flags
& (VDEV_CONFIG_SPARE
| VDEV_CONFIG_L2CACHE
)))
224 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_ID
, vd
->vdev_id
)
226 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_GUID
, vd
->vdev_guid
) == 0);
228 if (vd
->vdev_path
!= NULL
)
229 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_PATH
,
230 vd
->vdev_path
) == 0);
232 if (vd
->vdev_devid
!= NULL
)
233 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_DEVID
,
234 vd
->vdev_devid
) == 0);
236 if (vd
->vdev_physpath
!= NULL
)
237 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_PHYS_PATH
,
238 vd
->vdev_physpath
) == 0);
240 if (vd
->vdev_fru
!= NULL
)
241 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_FRU
,
244 if (vd
->vdev_nparity
!= 0) {
245 ASSERT(strcmp(vd
->vdev_ops
->vdev_op_type
,
246 VDEV_TYPE_RAIDZ
) == 0);
249 * Make sure someone hasn't managed to sneak a fancy new vdev
250 * into a crufty old storage pool.
252 ASSERT(vd
->vdev_nparity
== 1 ||
253 (vd
->vdev_nparity
<= 2 &&
254 spa_version(spa
) >= SPA_VERSION_RAIDZ2
) ||
255 (vd
->vdev_nparity
<= 3 &&
256 spa_version(spa
) >= SPA_VERSION_RAIDZ3
));
259 * Note that we'll add the nparity tag even on storage pools
260 * that only support a single parity device -- older software
261 * will just ignore it.
263 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_NPARITY
,
264 vd
->vdev_nparity
) == 0);
267 if (vd
->vdev_wholedisk
!= -1ULL)
268 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_WHOLE_DISK
,
269 vd
->vdev_wholedisk
) == 0);
271 if (vd
->vdev_not_present
)
272 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_NOT_PRESENT
, 1) == 0);
274 if (vd
->vdev_isspare
)
275 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_IS_SPARE
, 1) == 0);
277 if (!(flags
& (VDEV_CONFIG_SPARE
| VDEV_CONFIG_L2CACHE
)) &&
278 vd
== vd
->vdev_top
) {
279 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_METASLAB_ARRAY
,
280 vd
->vdev_ms_array
) == 0);
281 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_METASLAB_SHIFT
,
282 vd
->vdev_ms_shift
) == 0);
283 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_ASHIFT
,
284 vd
->vdev_ashift
) == 0);
285 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_ASIZE
,
286 vd
->vdev_asize
) == 0);
287 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_IS_LOG
,
288 vd
->vdev_islog
) == 0);
289 if (vd
->vdev_removing
)
290 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_REMOVING
,
291 vd
->vdev_removing
) == 0);
294 if (vd
->vdev_dtl_smo
.smo_object
!= 0)
295 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_DTL
,
296 vd
->vdev_dtl_smo
.smo_object
) == 0);
299 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_CREATE_TXG
,
300 vd
->vdev_crtxg
) == 0);
306 vdev_get_stats(vd
, &vs
);
307 VERIFY(nvlist_add_uint64_array(nv
, ZPOOL_CONFIG_VDEV_STATS
,
308 (uint64_t *)&vs
, sizeof (vs
) / sizeof (uint64_t)) == 0);
310 /* provide either current or previous scan information */
311 if (spa_scan_get_stats(spa
, &ps
) == 0) {
312 VERIFY(nvlist_add_uint64_array(nv
,
313 ZPOOL_CONFIG_SCAN_STATS
, (uint64_t *)&ps
,
314 sizeof (pool_scan_stat_t
) / sizeof (uint64_t))
319 if (!vd
->vdev_ops
->vdev_op_leaf
) {
323 ASSERT(!vd
->vdev_ishole
);
325 child
= kmem_alloc(vd
->vdev_children
* sizeof (nvlist_t
*),
328 for (c
= 0, idx
= 0; c
< vd
->vdev_children
; c
++) {
329 vdev_t
*cvd
= vd
->vdev_child
[c
];
332 * If we're generating an nvlist of removing
333 * vdevs then skip over any device which is
336 if ((flags
& VDEV_CONFIG_REMOVING
) &&
340 child
[idx
++] = vdev_config_generate(spa
, cvd
,
345 VERIFY(nvlist_add_nvlist_array(nv
,
346 ZPOOL_CONFIG_CHILDREN
, child
, idx
) == 0);
349 for (c
= 0; c
< idx
; c
++)
350 nvlist_free(child
[c
]);
352 kmem_free(child
, vd
->vdev_children
* sizeof (nvlist_t
*));
355 const char *aux
= NULL
;
357 if (vd
->vdev_offline
&& !vd
->vdev_tmpoffline
)
358 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_OFFLINE
,
360 if (vd
->vdev_resilvering
)
361 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_RESILVERING
,
363 if (vd
->vdev_faulted
)
364 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_FAULTED
,
366 if (vd
->vdev_degraded
)
367 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_DEGRADED
,
369 if (vd
->vdev_removed
)
370 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_REMOVED
,
372 if (vd
->vdev_unspare
)
373 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_UNSPARE
,
376 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_IS_HOLE
,
379 switch (vd
->vdev_stat
.vs_aux
) {
380 case VDEV_AUX_ERR_EXCEEDED
:
381 aux
= "err_exceeded";
384 case VDEV_AUX_EXTERNAL
:
390 VERIFY(nvlist_add_string(nv
, ZPOOL_CONFIG_AUX_STATE
,
393 if (vd
->vdev_splitting
&& vd
->vdev_orig_guid
!= 0LL) {
394 VERIFY(nvlist_add_uint64(nv
, ZPOOL_CONFIG_ORIG_GUID
,
395 vd
->vdev_orig_guid
) == 0);
403 * Generate a view of the top-level vdevs. If we currently have holes
404 * in the namespace, then generate an array which contains a list of holey
405 * vdevs. Additionally, add the number of top-level children that currently
409 vdev_top_config_generate(spa_t
*spa
, nvlist_t
*config
)
411 vdev_t
*rvd
= spa
->spa_root_vdev
;
415 array
= kmem_alloc(rvd
->vdev_children
* sizeof (uint64_t), KM_PUSHPAGE
);
417 for (c
= 0, idx
= 0; c
< rvd
->vdev_children
; c
++) {
418 vdev_t
*tvd
= rvd
->vdev_child
[c
];
420 if (tvd
->vdev_ishole
)
425 VERIFY(nvlist_add_uint64_array(config
, ZPOOL_CONFIG_HOLE_ARRAY
,
429 VERIFY(nvlist_add_uint64(config
, ZPOOL_CONFIG_VDEV_CHILDREN
,
430 rvd
->vdev_children
) == 0);
432 kmem_free(array
, rvd
->vdev_children
* sizeof (uint64_t));
436 * Returns the configuration from the label of the given vdev. For vdevs
437 * which don't have a txg value stored on their label (i.e. spares/cache)
438 * or have not been completely initialized (txg = 0) just return
439 * the configuration from the first valid label we find. Otherwise,
440 * find the most up-to-date label that does not exceed the specified
444 vdev_label_read_config(vdev_t
*vd
, uint64_t txg
)
446 spa_t
*spa
= vd
->vdev_spa
;
447 nvlist_t
*config
= NULL
;
450 uint64_t best_txg
= 0;
452 int flags
= ZIO_FLAG_CONFIG_WRITER
| ZIO_FLAG_CANFAIL
|
453 ZIO_FLAG_SPECULATIVE
;
456 ASSERT(spa_config_held(spa
, SCL_STATE_ALL
, RW_WRITER
) == SCL_STATE_ALL
);
458 if (!vdev_readable(vd
))
461 vp
= zio_buf_alloc(sizeof (vdev_phys_t
));
464 for (l
= 0; l
< VDEV_LABELS
; l
++) {
465 nvlist_t
*label
= NULL
;
467 zio
= zio_root(spa
, NULL
, NULL
, flags
);
469 vdev_label_read(zio
, vd
, l
, vp
,
470 offsetof(vdev_label_t
, vl_vdev_phys
),
471 sizeof (vdev_phys_t
), NULL
, NULL
, flags
);
473 if (zio_wait(zio
) == 0 &&
474 nvlist_unpack(vp
->vp_nvlist
, sizeof (vp
->vp_nvlist
),
476 uint64_t label_txg
= 0;
479 * Auxiliary vdevs won't have txg values in their
480 * labels and newly added vdevs may not have been
481 * completely initialized so just return the
482 * configuration from the first valid label we
485 error
= nvlist_lookup_uint64(label
,
486 ZPOOL_CONFIG_POOL_TXG
, &label_txg
);
487 if ((error
|| label_txg
== 0) && !config
) {
490 } else if (label_txg
<= txg
&& label_txg
> best_txg
) {
491 best_txg
= label_txg
;
493 config
= fnvlist_dup(label
);
503 if (config
== NULL
&& !(flags
& ZIO_FLAG_TRYHARD
)) {
504 flags
|= ZIO_FLAG_TRYHARD
;
508 zio_buf_free(vp
, sizeof (vdev_phys_t
));
514 * Determine if a device is in use. The 'spare_guid' parameter will be filled
515 * in with the device guid if this spare is active elsewhere on the system.
518 vdev_inuse(vdev_t
*vd
, uint64_t crtxg
, vdev_labeltype_t reason
,
519 uint64_t *spare_guid
, uint64_t *l2cache_guid
)
521 spa_t
*spa
= vd
->vdev_spa
;
522 uint64_t state
, pool_guid
, device_guid
, txg
, spare_pool
;
529 *l2cache_guid
= 0ULL;
532 * Read the label, if any, and perform some basic sanity checks.
534 if ((label
= vdev_label_read_config(vd
, -1ULL)) == NULL
)
537 (void) nvlist_lookup_uint64(label
, ZPOOL_CONFIG_CREATE_TXG
,
540 if (nvlist_lookup_uint64(label
, ZPOOL_CONFIG_POOL_STATE
,
542 nvlist_lookup_uint64(label
, ZPOOL_CONFIG_GUID
,
543 &device_guid
) != 0) {
548 if (state
!= POOL_STATE_SPARE
&& state
!= POOL_STATE_L2CACHE
&&
549 (nvlist_lookup_uint64(label
, ZPOOL_CONFIG_POOL_GUID
,
551 nvlist_lookup_uint64(label
, ZPOOL_CONFIG_POOL_TXG
,
560 * Check to see if this device indeed belongs to the pool it claims to
561 * be a part of. The only way this is allowed is if the device is a hot
562 * spare (which we check for later on).
564 if (state
!= POOL_STATE_SPARE
&& state
!= POOL_STATE_L2CACHE
&&
565 !spa_guid_exists(pool_guid
, device_guid
) &&
566 !spa_spare_exists(device_guid
, NULL
, NULL
) &&
567 !spa_l2cache_exists(device_guid
, NULL
))
571 * If the transaction group is zero, then this an initialized (but
572 * unused) label. This is only an error if the create transaction
573 * on-disk is the same as the one we're using now, in which case the
574 * user has attempted to add the same vdev multiple times in the same
577 if (state
!= POOL_STATE_SPARE
&& state
!= POOL_STATE_L2CACHE
&&
578 txg
== 0 && vdtxg
== crtxg
)
582 * Check to see if this is a spare device. We do an explicit check for
583 * spa_has_spare() here because it may be on our pending list of spares
584 * to add. We also check if it is an l2cache device.
586 if (spa_spare_exists(device_guid
, &spare_pool
, NULL
) ||
587 spa_has_spare(spa
, device_guid
)) {
589 *spare_guid
= device_guid
;
592 case VDEV_LABEL_CREATE
:
593 case VDEV_LABEL_L2CACHE
:
596 case VDEV_LABEL_REPLACE
:
597 return (!spa_has_spare(spa
, device_guid
) ||
600 case VDEV_LABEL_SPARE
:
601 return (spa_has_spare(spa
, device_guid
));
608 * Check to see if this is an l2cache device.
610 if (spa_l2cache_exists(device_guid
, NULL
))
614 * We can't rely on a pool's state if it's been imported
615 * read-only. Instead we look to see if the pools is marked
616 * read-only in the namespace and set the state to active.
618 if ((spa
= spa_by_guid(pool_guid
, device_guid
)) != NULL
&&
619 spa_mode(spa
) == FREAD
)
620 state
= POOL_STATE_ACTIVE
;
623 * If the device is marked ACTIVE, then this device is in use by another
624 * pool on the system.
626 return (state
== POOL_STATE_ACTIVE
);
630 * Initialize a vdev label. We check to make sure each leaf device is not in
631 * use, and writable. We put down an initial label which we will later
632 * overwrite with a complete label. Note that it's important to do this
633 * sequentially, not in parallel, so that we catch cases of multiple use of the
634 * same leaf vdev in the vdev we're creating -- e.g. mirroring a disk with
638 vdev_label_init(vdev_t
*vd
, uint64_t crtxg
, vdev_labeltype_t reason
)
640 spa_t
*spa
= vd
->vdev_spa
;
649 uint64_t spare_guid
= 0, l2cache_guid
= 0;
650 int flags
= ZIO_FLAG_CONFIG_WRITER
| ZIO_FLAG_CANFAIL
;
654 ASSERT(spa_config_held(spa
, SCL_ALL
, RW_WRITER
) == SCL_ALL
);
656 for (c
= 0; c
< vd
->vdev_children
; c
++)
657 if ((error
= vdev_label_init(vd
->vdev_child
[c
],
658 crtxg
, reason
)) != 0)
661 /* Track the creation time for this vdev */
662 vd
->vdev_crtxg
= crtxg
;
664 if (!vd
->vdev_ops
->vdev_op_leaf
)
668 * Dead vdevs cannot be initialized.
670 if (vdev_is_dead(vd
))
674 * Determine if the vdev is in use.
676 if (reason
!= VDEV_LABEL_REMOVE
&& reason
!= VDEV_LABEL_SPLIT
&&
677 vdev_inuse(vd
, crtxg
, reason
, &spare_guid
, &l2cache_guid
))
681 * If this is a request to add or replace a spare or l2cache device
682 * that is in use elsewhere on the system, then we must update the
683 * guid (which was initialized to a random value) to reflect the
684 * actual GUID (which is shared between multiple pools).
686 if (reason
!= VDEV_LABEL_REMOVE
&& reason
!= VDEV_LABEL_L2CACHE
&&
687 spare_guid
!= 0ULL) {
688 uint64_t guid_delta
= spare_guid
- vd
->vdev_guid
;
690 vd
->vdev_guid
+= guid_delta
;
692 for (pvd
= vd
; pvd
!= NULL
; pvd
= pvd
->vdev_parent
)
693 pvd
->vdev_guid_sum
+= guid_delta
;
696 * If this is a replacement, then we want to fallthrough to the
697 * rest of the code. If we're adding a spare, then it's already
698 * labeled appropriately and we can just return.
700 if (reason
== VDEV_LABEL_SPARE
)
702 ASSERT(reason
== VDEV_LABEL_REPLACE
||
703 reason
== VDEV_LABEL_SPLIT
);
706 if (reason
!= VDEV_LABEL_REMOVE
&& reason
!= VDEV_LABEL_SPARE
&&
707 l2cache_guid
!= 0ULL) {
708 uint64_t guid_delta
= l2cache_guid
- vd
->vdev_guid
;
710 vd
->vdev_guid
+= guid_delta
;
712 for (pvd
= vd
; pvd
!= NULL
; pvd
= pvd
->vdev_parent
)
713 pvd
->vdev_guid_sum
+= guid_delta
;
716 * If this is a replacement, then we want to fallthrough to the
717 * rest of the code. If we're adding an l2cache, then it's
718 * already labeled appropriately and we can just return.
720 if (reason
== VDEV_LABEL_L2CACHE
)
722 ASSERT(reason
== VDEV_LABEL_REPLACE
);
726 * Initialize its label.
728 vp
= zio_buf_alloc(sizeof (vdev_phys_t
));
729 bzero(vp
, sizeof (vdev_phys_t
));
732 * Generate a label describing the pool and our top-level vdev.
733 * We mark it as being from txg 0 to indicate that it's not
734 * really part of an active pool just yet. The labels will
735 * be written again with a meaningful txg by spa_sync().
737 if (reason
== VDEV_LABEL_SPARE
||
738 (reason
== VDEV_LABEL_REMOVE
&& vd
->vdev_isspare
)) {
740 * For inactive hot spares, we generate a special label that
741 * identifies as a mutually shared hot spare. We write the
742 * label if we are adding a hot spare, or if we are removing an
743 * active hot spare (in which case we want to revert the
746 VERIFY(nvlist_alloc(&label
, NV_UNIQUE_NAME
, KM_PUSHPAGE
) == 0);
748 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_VERSION
,
749 spa_version(spa
)) == 0);
750 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_POOL_STATE
,
751 POOL_STATE_SPARE
) == 0);
752 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_GUID
,
753 vd
->vdev_guid
) == 0);
754 } else if (reason
== VDEV_LABEL_L2CACHE
||
755 (reason
== VDEV_LABEL_REMOVE
&& vd
->vdev_isl2cache
)) {
757 * For level 2 ARC devices, add a special label.
759 VERIFY(nvlist_alloc(&label
, NV_UNIQUE_NAME
, KM_PUSHPAGE
) == 0);
761 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_VERSION
,
762 spa_version(spa
)) == 0);
763 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_POOL_STATE
,
764 POOL_STATE_L2CACHE
) == 0);
765 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_GUID
,
766 vd
->vdev_guid
) == 0);
770 if (reason
== VDEV_LABEL_SPLIT
)
771 txg
= spa
->spa_uberblock
.ub_txg
;
772 label
= spa_config_generate(spa
, vd
, txg
, B_FALSE
);
775 * Add our creation time. This allows us to detect multiple
776 * vdev uses as described above, and automatically expires if we
779 VERIFY(nvlist_add_uint64(label
, ZPOOL_CONFIG_CREATE_TXG
,
784 buflen
= sizeof (vp
->vp_nvlist
);
786 error
= nvlist_pack(label
, &buf
, &buflen
, NV_ENCODE_XDR
, KM_PUSHPAGE
);
789 zio_buf_free(vp
, sizeof (vdev_phys_t
));
790 /* EFAULT means nvlist_pack ran out of room */
791 return (error
== EFAULT
? ENAMETOOLONG
: EINVAL
);
795 * Initialize uberblock template.
797 ub
= zio_buf_alloc(VDEV_UBERBLOCK_RING
);
798 bzero(ub
, VDEV_UBERBLOCK_RING
);
799 *ub
= spa
->spa_uberblock
;
802 /* Initialize the 2nd padding area. */
803 pad2
= zio_buf_alloc(VDEV_PAD_SIZE
);
804 bzero(pad2
, VDEV_PAD_SIZE
);
807 * Write everything in parallel.
810 zio
= zio_root(spa
, NULL
, NULL
, flags
);
812 for (l
= 0; l
< VDEV_LABELS
; l
++) {
814 vdev_label_write(zio
, vd
, l
, vp
,
815 offsetof(vdev_label_t
, vl_vdev_phys
),
816 sizeof (vdev_phys_t
), NULL
, NULL
, flags
);
819 * Skip the 1st padding area.
820 * Zero out the 2nd padding area where it might have
821 * left over data from previous filesystem format.
823 vdev_label_write(zio
, vd
, l
, pad2
,
824 offsetof(vdev_label_t
, vl_pad2
),
825 VDEV_PAD_SIZE
, NULL
, NULL
, flags
);
827 vdev_label_write(zio
, vd
, l
, ub
,
828 offsetof(vdev_label_t
, vl_uberblock
),
829 VDEV_UBERBLOCK_RING
, NULL
, NULL
, flags
);
832 error
= zio_wait(zio
);
834 if (error
!= 0 && !(flags
& ZIO_FLAG_TRYHARD
)) {
835 flags
|= ZIO_FLAG_TRYHARD
;
840 zio_buf_free(pad2
, VDEV_PAD_SIZE
);
841 zio_buf_free(ub
, VDEV_UBERBLOCK_RING
);
842 zio_buf_free(vp
, sizeof (vdev_phys_t
));
845 * If this vdev hasn't been previously identified as a spare, then we
846 * mark it as such only if a) we are labeling it as a spare, or b) it
847 * exists as a spare elsewhere in the system. Do the same for
848 * level 2 ARC devices.
850 if (error
== 0 && !vd
->vdev_isspare
&&
851 (reason
== VDEV_LABEL_SPARE
||
852 spa_spare_exists(vd
->vdev_guid
, NULL
, NULL
)))
855 if (error
== 0 && !vd
->vdev_isl2cache
&&
856 (reason
== VDEV_LABEL_L2CACHE
||
857 spa_l2cache_exists(vd
->vdev_guid
, NULL
)))
864 * ==========================================================================
865 * uberblock load/sync
866 * ==========================================================================
870 * Consider the following situation: txg is safely synced to disk. We've
871 * written the first uberblock for txg + 1, and then we lose power. When we
872 * come back up, we fail to see the uberblock for txg + 1 because, say,
873 * it was on a mirrored device and the replica to which we wrote txg + 1
874 * is now offline. If we then make some changes and sync txg + 1, and then
875 * the missing replica comes back, then for a few seconds we'll have two
876 * conflicting uberblocks on disk with the same txg. The solution is simple:
877 * among uberblocks with equal txg, choose the one with the latest timestamp.
880 vdev_uberblock_compare(uberblock_t
*ub1
, uberblock_t
*ub2
)
882 if (ub1
->ub_txg
< ub2
->ub_txg
)
884 if (ub1
->ub_txg
> ub2
->ub_txg
)
887 if (ub1
->ub_timestamp
< ub2
->ub_timestamp
)
889 if (ub1
->ub_timestamp
> ub2
->ub_timestamp
)
896 uberblock_t
*ubl_ubbest
; /* Best uberblock */
897 vdev_t
*ubl_vd
; /* vdev associated with the above */
901 vdev_uberblock_load_done(zio_t
*zio
)
903 vdev_t
*vd
= zio
->io_vd
;
904 spa_t
*spa
= zio
->io_spa
;
905 zio_t
*rio
= zio
->io_private
;
906 uberblock_t
*ub
= zio
->io_data
;
907 struct ubl_cbdata
*cbp
= rio
->io_private
;
909 ASSERT3U(zio
->io_size
, ==, VDEV_UBERBLOCK_SIZE(vd
));
911 if (zio
->io_error
== 0 && uberblock_verify(ub
) == 0) {
912 mutex_enter(&rio
->io_lock
);
913 if (ub
->ub_txg
<= spa
->spa_load_max_txg
&&
914 vdev_uberblock_compare(ub
, cbp
->ubl_ubbest
) > 0) {
916 * Keep track of the vdev in which this uberblock
917 * was found. We will use this information later
918 * to obtain the config nvlist associated with
921 *cbp
->ubl_ubbest
= *ub
;
924 mutex_exit(&rio
->io_lock
);
927 zio_buf_free(zio
->io_data
, zio
->io_size
);
931 vdev_uberblock_load_impl(zio_t
*zio
, vdev_t
*vd
, int flags
,
932 struct ubl_cbdata
*cbp
)
936 for (c
= 0; c
< vd
->vdev_children
; c
++)
937 vdev_uberblock_load_impl(zio
, vd
->vdev_child
[c
], flags
, cbp
);
939 if (vd
->vdev_ops
->vdev_op_leaf
&& vdev_readable(vd
)) {
940 for (l
= 0; l
< VDEV_LABELS
; l
++) {
941 for (n
= 0; n
< VDEV_UBERBLOCK_COUNT(vd
); n
++) {
942 vdev_label_read(zio
, vd
, l
,
943 zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd
)),
944 VDEV_UBERBLOCK_OFFSET(vd
, n
),
945 VDEV_UBERBLOCK_SIZE(vd
),
946 vdev_uberblock_load_done
, zio
, flags
);
953 * Reads the 'best' uberblock from disk along with its associated
954 * configuration. First, we read the uberblock array of each label of each
955 * vdev, keeping track of the uberblock with the highest txg in each array.
956 * Then, we read the configuration from the same vdev as the best uberblock.
959 vdev_uberblock_load(vdev_t
*rvd
, uberblock_t
*ub
, nvlist_t
**config
)
962 spa_t
*spa
= rvd
->vdev_spa
;
963 struct ubl_cbdata cb
;
964 int flags
= ZIO_FLAG_CONFIG_WRITER
| ZIO_FLAG_CANFAIL
|
965 ZIO_FLAG_SPECULATIVE
| ZIO_FLAG_TRYHARD
;
970 bzero(ub
, sizeof (uberblock_t
));
976 spa_config_enter(spa
, SCL_ALL
, FTAG
, RW_WRITER
);
977 zio
= zio_root(spa
, NULL
, &cb
, flags
);
978 vdev_uberblock_load_impl(zio
, rvd
, flags
, &cb
);
979 (void) zio_wait(zio
);
982 * It's possible that the best uberblock was discovered on a label
983 * that has a configuration which was written in a future txg.
984 * Search all labels on this vdev to find the configuration that
985 * matches the txg for our uberblock.
987 if (cb
.ubl_vd
!= NULL
)
988 *config
= vdev_label_read_config(cb
.ubl_vd
, ub
->ub_txg
);
989 spa_config_exit(spa
, SCL_ALL
, FTAG
);
993 * On success, increment root zio's count of good writes.
994 * We only get credit for writes to known-visible vdevs; see spa_vdev_add().
997 vdev_uberblock_sync_done(zio_t
*zio
)
999 uint64_t *good_writes
= zio
->io_private
;
1001 if (zio
->io_error
== 0 && zio
->io_vd
->vdev_top
->vdev_ms_array
!= 0)
1002 atomic_add_64(good_writes
, 1);
1006 * Write the uberblock to all labels of all leaves of the specified vdev.
1009 vdev_uberblock_sync(zio_t
*zio
, uberblock_t
*ub
, vdev_t
*vd
, int flags
)
1014 for (c
= 0; c
< vd
->vdev_children
; c
++)
1015 vdev_uberblock_sync(zio
, ub
, vd
->vdev_child
[c
], flags
);
1017 if (!vd
->vdev_ops
->vdev_op_leaf
)
1020 if (!vdev_writeable(vd
))
1023 n
= ub
->ub_txg
& (VDEV_UBERBLOCK_COUNT(vd
) - 1);
1025 ubbuf
= zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd
));
1026 bzero(ubbuf
, VDEV_UBERBLOCK_SIZE(vd
));
1029 for (l
= 0; l
< VDEV_LABELS
; l
++)
1030 vdev_label_write(zio
, vd
, l
, ubbuf
,
1031 VDEV_UBERBLOCK_OFFSET(vd
, n
), VDEV_UBERBLOCK_SIZE(vd
),
1032 vdev_uberblock_sync_done
, zio
->io_private
,
1033 flags
| ZIO_FLAG_DONT_PROPAGATE
);
1035 zio_buf_free(ubbuf
, VDEV_UBERBLOCK_SIZE(vd
));
1039 vdev_uberblock_sync_list(vdev_t
**svd
, int svdcount
, uberblock_t
*ub
, int flags
)
1041 spa_t
*spa
= svd
[0]->vdev_spa
;
1043 uint64_t good_writes
= 0;
1046 zio
= zio_root(spa
, NULL
, &good_writes
, flags
);
1048 for (v
= 0; v
< svdcount
; v
++)
1049 vdev_uberblock_sync(zio
, ub
, svd
[v
], flags
);
1051 (void) zio_wait(zio
);
1054 * Flush the uberblocks to disk. This ensures that the odd labels
1055 * are no longer needed (because the new uberblocks and the even
1056 * labels are safely on disk), so it is safe to overwrite them.
1058 zio
= zio_root(spa
, NULL
, NULL
, flags
);
1060 for (v
= 0; v
< svdcount
; v
++)
1061 zio_flush(zio
, svd
[v
]);
1063 (void) zio_wait(zio
);
1065 return (good_writes
>= 1 ? 0 : EIO
);
1069 * On success, increment the count of good writes for our top-level vdev.
1072 vdev_label_sync_done(zio_t
*zio
)
1074 uint64_t *good_writes
= zio
->io_private
;
1076 if (zio
->io_error
== 0)
1077 atomic_add_64(good_writes
, 1);
1081 * If there weren't enough good writes, indicate failure to the parent.
1084 vdev_label_sync_top_done(zio_t
*zio
)
1086 uint64_t *good_writes
= zio
->io_private
;
1088 if (*good_writes
== 0)
1089 zio
->io_error
= EIO
;
1091 kmem_free(good_writes
, sizeof (uint64_t));
1095 * We ignore errors for log and cache devices, simply free the private data.
1098 vdev_label_sync_ignore_done(zio_t
*zio
)
1100 kmem_free(zio
->io_private
, sizeof (uint64_t));
1104 * Write all even or odd labels to all leaves of the specified vdev.
1107 vdev_label_sync(zio_t
*zio
, vdev_t
*vd
, int l
, uint64_t txg
, int flags
)
1115 for (c
= 0; c
< vd
->vdev_children
; c
++)
1116 vdev_label_sync(zio
, vd
->vdev_child
[c
], l
, txg
, flags
);
1118 if (!vd
->vdev_ops
->vdev_op_leaf
)
1121 if (!vdev_writeable(vd
))
1125 * Generate a label describing the top-level config to which we belong.
1127 label
= spa_config_generate(vd
->vdev_spa
, vd
, txg
, B_FALSE
);
1129 vp
= zio_buf_alloc(sizeof (vdev_phys_t
));
1130 bzero(vp
, sizeof (vdev_phys_t
));
1132 buf
= vp
->vp_nvlist
;
1133 buflen
= sizeof (vp
->vp_nvlist
);
1135 if (nvlist_pack(label
, &buf
, &buflen
, NV_ENCODE_XDR
, KM_PUSHPAGE
) == 0) {
1136 for (; l
< VDEV_LABELS
; l
+= 2) {
1137 vdev_label_write(zio
, vd
, l
, vp
,
1138 offsetof(vdev_label_t
, vl_vdev_phys
),
1139 sizeof (vdev_phys_t
),
1140 vdev_label_sync_done
, zio
->io_private
,
1141 flags
| ZIO_FLAG_DONT_PROPAGATE
);
1145 zio_buf_free(vp
, sizeof (vdev_phys_t
));
1150 vdev_label_sync_list(spa_t
*spa
, int l
, uint64_t txg
, int flags
)
1152 list_t
*dl
= &spa
->spa_config_dirty_list
;
1158 * Write the new labels to disk.
1160 zio
= zio_root(spa
, NULL
, NULL
, flags
);
1162 for (vd
= list_head(dl
); vd
!= NULL
; vd
= list_next(dl
, vd
)) {
1163 uint64_t *good_writes
;
1166 ASSERT(!vd
->vdev_ishole
);
1168 good_writes
= kmem_zalloc(sizeof (uint64_t), KM_PUSHPAGE
);
1169 vio
= zio_null(zio
, spa
, NULL
,
1170 (vd
->vdev_islog
|| vd
->vdev_aux
!= NULL
) ?
1171 vdev_label_sync_ignore_done
: vdev_label_sync_top_done
,
1172 good_writes
, flags
);
1173 vdev_label_sync(vio
, vd
, l
, txg
, flags
);
1177 error
= zio_wait(zio
);
1180 * Flush the new labels to disk.
1182 zio
= zio_root(spa
, NULL
, NULL
, flags
);
1184 for (vd
= list_head(dl
); vd
!= NULL
; vd
= list_next(dl
, vd
))
1187 (void) zio_wait(zio
);
1193 * Sync the uberblock and any changes to the vdev configuration.
1195 * The order of operations is carefully crafted to ensure that
1196 * if the system panics or loses power at any time, the state on disk
1197 * is still transactionally consistent. The in-line comments below
1198 * describe the failure semantics at each stage.
1200 * Moreover, vdev_config_sync() is designed to be idempotent: if it fails
1201 * at any time, you can just call it again, and it will resume its work.
1204 vdev_config_sync(vdev_t
**svd
, int svdcount
, uint64_t txg
, boolean_t tryhard
)
1206 spa_t
*spa
= svd
[0]->vdev_spa
;
1207 uberblock_t
*ub
= &spa
->spa_uberblock
;
1211 int flags
= ZIO_FLAG_CONFIG_WRITER
| ZIO_FLAG_CANFAIL
;
1214 * Normally, we don't want to try too hard to write every label and
1215 * uberblock. If there is a flaky disk, we don't want the rest of the
1216 * sync process to block while we retry. But if we can't write a
1217 * single label out, we should retry with ZIO_FLAG_TRYHARD before
1218 * bailing out and declaring the pool faulted.
1221 flags
|= ZIO_FLAG_TRYHARD
;
1223 ASSERT(ub
->ub_txg
<= txg
);
1226 * If this isn't a resync due to I/O errors,
1227 * and nothing changed in this transaction group,
1228 * and the vdev configuration hasn't changed,
1229 * then there's nothing to do.
1231 if (ub
->ub_txg
< txg
&&
1232 uberblock_update(ub
, spa
->spa_root_vdev
, txg
) == B_FALSE
&&
1233 list_is_empty(&spa
->spa_config_dirty_list
))
1236 if (txg
> spa_freeze_txg(spa
))
1239 ASSERT(txg
<= spa
->spa_final_txg
);
1242 * Flush the write cache of every disk that's been written to
1243 * in this transaction group. This ensures that all blocks
1244 * written in this txg will be committed to stable storage
1245 * before any uberblock that references them.
1247 zio
= zio_root(spa
, NULL
, NULL
, flags
);
1249 for (vd
= txg_list_head(&spa
->spa_vdev_txg_list
, TXG_CLEAN(txg
)); vd
;
1250 vd
= txg_list_next(&spa
->spa_vdev_txg_list
, vd
, TXG_CLEAN(txg
)))
1253 (void) zio_wait(zio
);
1256 * Sync out the even labels (L0, L2) for every dirty vdev. If the
1257 * system dies in the middle of this process, that's OK: all of the
1258 * even labels that made it to disk will be newer than any uberblock,
1259 * and will therefore be considered invalid. The odd labels (L1, L3),
1260 * which have not yet been touched, will still be valid. We flush
1261 * the new labels to disk to ensure that all even-label updates
1262 * are committed to stable storage before the uberblock update.
1264 if ((error
= vdev_label_sync_list(spa
, 0, txg
, flags
)) != 0)
1268 * Sync the uberblocks to all vdevs in svd[].
1269 * If the system dies in the middle of this step, there are two cases
1270 * to consider, and the on-disk state is consistent either way:
1272 * (1) If none of the new uberblocks made it to disk, then the
1273 * previous uberblock will be the newest, and the odd labels
1274 * (which had not yet been touched) will be valid with respect
1275 * to that uberblock.
1277 * (2) If one or more new uberblocks made it to disk, then they
1278 * will be the newest, and the even labels (which had all
1279 * been successfully committed) will be valid with respect
1280 * to the new uberblocks.
1282 if ((error
= vdev_uberblock_sync_list(svd
, svdcount
, ub
, flags
)) != 0)
1286 * Sync out odd labels for every dirty vdev. If the system dies
1287 * in the middle of this process, the even labels and the new
1288 * uberblocks will suffice to open the pool. The next time
1289 * the pool is opened, the first thing we'll do -- before any
1290 * user data is modified -- is mark every vdev dirty so that
1291 * all labels will be brought up to date. We flush the new labels
1292 * to disk to ensure that all odd-label updates are committed to
1293 * stable storage before the next transaction group begins.
1295 return (vdev_label_sync_list(spa
, 1, txg
, flags
));