4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
22 * Copyright (c) 2011, Lawrence Livermore National Security, LLC.
26 #include <sys/zfs_vfsops.h>
27 #include <sys/zfs_vnops.h>
28 #include <sys/zfs_znode.h>
33 zpl_open(struct inode
*ip
, struct file
*filp
)
39 error
= -zfs_open(ip
, filp
->f_mode
, filp
->f_flags
, cr
);
41 ASSERT3S(error
, <=, 0);
46 return generic_file_open(ip
, filp
);
50 zpl_release(struct inode
*ip
, struct file
*filp
)
56 error
= -zfs_close(ip
, filp
->f_flags
, cr
);
58 ASSERT3S(error
, <=, 0);
64 zpl_readdir(struct file
*filp
, void *dirent
, filldir_t filldir
)
66 struct dentry
*dentry
= filp
->f_path
.dentry
;
71 error
= -zfs_readdir(dentry
->d_inode
, dirent
, filldir
,
74 ASSERT3S(error
, <=, 0);
81 * As of 2.6.35 the dentry argument to the .fsync() vfs hook was deemed
82 * redundant. The dentry is still accessible via filp->f_path.dentry,
83 * and we are guaranteed that filp will never be NULL.
86 * Prior to 2.6.34 the nfsd kernel server would pass a NULL file struct *
87 * to the .fsync() hook. For this reason, we must be careful not to use
88 * filp unconditionally in the 3 argument case.
90 #ifdef HAVE_2ARGS_FSYNC
92 zpl_fsync(struct file
*filp
, int datasync
)
94 struct dentry
*dentry
= filp
->f_path
.dentry
;
97 zpl_fsync(struct file
*filp
, struct dentry
*dentry
, int datasync
)
99 #endif /* HAVE_2ARGS_FSYNC */
104 error
= -zfs_fsync(dentry
->d_inode
, datasync
, cr
);
106 ASSERT3S(error
, <=, 0);
112 zpl_read_common(struct inode
*ip
, const char *buf
, size_t len
, loff_t pos
,
113 uio_seg_t segment
, int flags
, cred_t
*cr
)
119 iov
.iov_base
= (void *)buf
;
125 uio
.uio_loffset
= pos
;
126 uio
.uio_limit
= MAXOFFSET_T
;
127 uio
.uio_segflg
= segment
;
129 error
= -zfs_read(ip
, &uio
, flags
, cr
);
133 return (len
- uio
.uio_resid
);
137 zpl_read(struct file
*filp
, char __user
*buf
, size_t len
, loff_t
*ppos
)
143 read
= zpl_read_common(filp
->f_mapping
->host
, buf
, len
, *ppos
,
144 UIO_USERSPACE
, filp
->f_flags
, cr
);
155 zpl_write_common(struct inode
*ip
, const char *buf
, size_t len
, loff_t pos
,
156 uio_seg_t segment
, int flags
, cred_t
*cr
)
162 iov
.iov_base
= (void *)buf
;
168 uio
.uio_loffset
= pos
;
169 uio
.uio_limit
= MAXOFFSET_T
;
170 uio
.uio_segflg
= segment
;
172 error
= -zfs_write(ip
, &uio
, flags
, cr
);
176 return (len
- uio
.uio_resid
);
180 zpl_write(struct file
*filp
, const char __user
*buf
, size_t len
, loff_t
*ppos
)
186 wrote
= zpl_write_common(filp
->f_mapping
->host
, buf
, len
, *ppos
,
187 UIO_USERSPACE
, filp
->f_flags
, cr
);
198 * It's worth taking a moment to describe how mmap is implemented
199 * for zfs because it differs considerably from other Linux filesystems.
200 * However, this issue is handled the same way under OpenSolaris.
202 * The issue is that by design zfs bypasses the Linux page cache and
203 * leaves all caching up to the ARC. This has been shown to work
204 * well for the common read(2)/write(2) case. However, mmap(2)
205 * is problem because it relies on being tightly integrated with the
206 * page cache. To handle this we cache mmap'ed files twice, once in
207 * the ARC and a second time in the page cache. The code is careful
208 * to keep both copies synchronized.
210 * When a file with an mmap'ed region is written to using write(2)
211 * both the data in the ARC and existing pages in the page cache
212 * are updated. For a read(2) data will be read first from the page
213 * cache then the ARC if needed. Neither a write(2) or read(2) will
214 * will ever result in new pages being added to the page cache.
216 * New pages are added to the page cache only via .readpage() which
217 * is called when the vfs needs to read a page off disk to back the
218 * virtual memory region. These pages may be modified without
219 * notifying the ARC and will be written out periodically via
220 * .writepage(). This will occur due to either a sync or the usual
221 * page aging behavior. Note because a read(2) of a mmap'ed file
222 * will always check the page cache first even when the ARC is out
223 * of date correct data will still be returned.
225 * While this implementation ensures correct behavior it does have
226 * have some drawbacks. The most obvious of which is that it
227 * increases the required memory footprint when access mmap'ed
228 * files. It also adds additional complexity to the code keeping
229 * both caches synchronized.
231 * Longer term it may be possible to cleanly resolve this wart by
232 * mapping page cache pages directly on to the ARC buffers. The
233 * Linux address space operations are flexible enough to allow
234 * selection of which pages back a particular index. The trick
235 * would be working out the details of which subsystem is in
236 * charge, the ARC, the page cache, or both. It may also prove
237 * helpful to move the ARC buffers to a scatter-gather lists
238 * rather than a vmalloc'ed region.
241 zpl_mmap(struct file
*filp
, struct vm_area_struct
*vma
)
243 struct inode
*ip
= filp
->f_mapping
->host
;
244 znode_t
*zp
= ITOZ(ip
);
247 error
= -zfs_map(ip
, vma
->vm_pgoff
, (caddr_t
*)vma
->vm_start
,
248 (size_t)(vma
->vm_end
- vma
->vm_start
), vma
->vm_flags
);
252 error
= generic_file_mmap(filp
, vma
);
256 mutex_enter(&zp
->z_lock
);
258 mutex_exit(&zp
->z_lock
);
264 * Populate a page with data for the Linux page cache. This function is
265 * only used to support mmap(2). There will be an identical copy of the
266 * data in the ARC which is kept up to date via .write() and .writepage().
268 * Current this function relies on zpl_read_common() and the O_DIRECT
269 * flag to read in a page. This works but the more correct way is to
270 * update zfs_fillpage() to be Linux friendly and use that interface.
273 zpl_readpage(struct file
*filp
, struct page
*pp
)
279 ASSERT(PageLocked(pp
));
280 ip
= pp
->mapping
->host
;
283 error
= -zfs_getpage(ip
, pl
, 1);
287 ClearPageUptodate(pp
);
291 flush_dcache_page(pp
);
299 * Populate a set of pages with data for the Linux page cache. This
300 * function will only be called for read ahead and never for demand
301 * paging. For simplicity, the code relies on read_cache_pages() to
302 * correctly lock each page for IO and call zpl_readpage().
305 zpl_readpages(struct file
*filp
, struct address_space
*mapping
,
306 struct list_head
*pages
, unsigned nr_pages
)
308 return (read_cache_pages(mapping
, pages
,
309 (filler_t
*)zpl_readpage
, filp
));
313 zpl_putpage(struct page
*pp
, struct writeback_control
*wbc
, void *data
)
315 struct address_space
*mapping
= data
;
317 ASSERT(PageLocked(pp
));
318 ASSERT(!PageWriteback(pp
));
321 * Disable the normal reclaim path for zpl_putpage(). This
322 * ensures that all memory allocations under this call path
323 * will never enter direct reclaim. If this were to happen
324 * the VM might try to write out additional pages by calling
325 * zpl_putpage() again resulting in a deadlock.
327 current
->flags
|= PF_MEMALLOC
;
328 (void) zfs_putpage(mapping
->host
, pp
, wbc
);
329 current
->flags
&= ~PF_MEMALLOC
;
335 zpl_writepages(struct address_space
*mapping
, struct writeback_control
*wbc
)
337 return write_cache_pages(mapping
, wbc
, zpl_putpage
, mapping
);
341 * Write out dirty pages to the ARC, this function is only required to
342 * support mmap(2). Mapped pages may be dirtied by memory operations
343 * which never call .write(). These dirty pages are kept in sync with
344 * the ARC buffers via this hook.
347 zpl_writepage(struct page
*pp
, struct writeback_control
*wbc
)
349 return zpl_putpage(pp
, wbc
, pp
->mapping
);
352 const struct address_space_operations zpl_address_space_operations
= {
353 .readpages
= zpl_readpages
,
354 .readpage
= zpl_readpage
,
355 .writepage
= zpl_writepage
,
356 .writepages
= zpl_writepages
,
359 const struct file_operations zpl_file_operations
= {
361 .release
= zpl_release
,
362 .llseek
= generic_file_llseek
,
365 .readdir
= zpl_readdir
,
370 const struct file_operations zpl_dir_file_operations
= {
371 .llseek
= generic_file_llseek
,
372 .read
= generic_read_dir
,
373 .readdir
= zpl_readdir
,