+also provide an easy way to share data between different containers.
+
+
+FUSE Mounts
+~~~~~~~~~~~
+
+WARNING: Because of existing issues in the Linux kernel's freezer
+subsystem the usage of FUSE mounts inside a container is strongly
+advised against, as containers need to be frozen for suspend or
+snapshot mode backups.
+
+If FUSE mounts cannot be replaced by other mounting mechanisms or storage
+technologies, it is possible to establish the FUSE mount on the Proxmox host
+and use a bind mount point to make it accessible inside the container.
+
+
+Using Quotas Inside Containers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Quotas allow to set limits inside a container for the amount of disk
+space that each user can use. This only works on ext4 image based
+storage types and currently does not work with unprivileged
+containers.
+
+Activating the `quota` option causes the following mount options to be
+used for a mount point:
+`usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0`
+
+This allows quotas to be used like you would on any other system. You
+can initialize the `/aquota.user` and `/aquota.group` files by running
+
+----
+quotacheck -cmug /
+quotaon /
+----
+
+and edit the quotas via the `edquota` command. Refer to the documentation
+of the distribution running inside the container for details.
+
+NOTE: You need to run the above commands for every mount point by passing
+the mount point's path instead of just `/`.
+
+
+Using ACLs Inside Containers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The standard Posix **A**ccess **C**ontrol **L**ists are also available inside containers.
+ACLs allow you to set more detailed file ownership than the traditional user/
+group/others model.
+
+
+[[pct_settings]]
+Container Settings
+------------------
+
+[[pct_general]]
+General Settings
+~~~~~~~~~~~~~~~~
+
+[thumbnail="gui-create-ct-general.png"]
+
+General settings of a container include
+
+* the *Node* : the physical server on which the container will run
+* the *CT ID*: a unique number in this {pve} installation used to identify your container
+* *Hostname*: the hostname of the container
+* *Resource Pool*: a logical group of containers and VMs
+* *Password*: the root password of the container
+* *SSH Public Key*: a public key for connecting to the root account over SSH
+* *Unprivileged container*: this option allows to choose at creation time
+if you want to create a privileged or unprivileged container.
+
+
+Privileged Containers
+^^^^^^^^^^^^^^^^^^^^^
+
+Security is done by dropping capabilities, using mandatory access
+control (AppArmor), SecComp filters and namespaces. The LXC team
+considers this kind of container as unsafe, and they will not consider
+new container escape exploits to be security issues worthy of a CVE
+and quick fix. So you should use this kind of containers only inside a
+trusted environment, or when no untrusted task is running as root in
+the container.
+
+
+Unprivileged Containers
+^^^^^^^^^^^^^^^^^^^^^^^
+
+This kind of containers use a new kernel feature called user
+namespaces. The root UID 0 inside the container is mapped to an
+unprivileged user outside the container. This means that most security
+issues (container escape, resource abuse, ...) in those containers
+will affect a random unprivileged user, and so would be a generic
+kernel security bug rather than an LXC issue. The LXC team thinks
+unprivileged containers are safe by design.
+
+NOTE: If the container uses systemd as an init system, please be
+aware the systemd version running inside the container should be equal
+or greater than 220.
+
+[[pct_cpu]]
+CPU
+~~~
+
+[thumbnail="gui-create-ct-cpu.png"]
+
+You can restrict the number of visible CPUs inside the container using
+the `cores` option. This is implemented using the Linux 'cpuset'
+cgroup (**c**ontrol *group*). A special task inside `pvestatd` tries
+to distribute running containers among available CPUs. You can view
+the assigned CPUs using the following command:
+
+----
+# pct cpusets
+ ---------------------
+ 102: 6 7
+ 105: 2 3 4 5
+ 108: 0 1
+ ---------------------
+----
+
+Containers use the host kernel directly, so all task inside a
+container are handled by the host CPU scheduler. {pve} uses the Linux
+'CFS' (**C**ompletely **F**air **S**cheduler) scheduler by default,
+which has additional bandwidth control options.
+
+[horizontal]
+
+`cpulimit`: :: You can use this option to further limit assigned CPU
+time. Please note that this is a floating point number, so it is
+perfectly valid to assign two cores to a container, but restrict
+overall CPU consumption to half a core.
++
+----
+cores: 2
+cpulimit: 0.5
+----
+
+`cpuunits`: :: This is a relative weight passed to the kernel
+scheduler. The larger the number is, the more CPU time this container
+gets. Number is relative to the weights of all the other running
+containers. The default is 1024. You can use this setting to
+prioritize some containers.
+
+
+[[pct_memory]]
+Memory
+~~~~~~
+
+[thumbnail="gui-create-ct-memory.png"]
+
+Container memory is controlled using the cgroup memory controller.
+
+[horizontal]
+
+`memory`: :: Limit overall memory usage. This corresponds
+to the `memory.limit_in_bytes` cgroup setting.
+
+`swap`: :: Allows the container to use additional swap memory from the
+host swap space. This corresponds to the `memory.memsw.limit_in_bytes`
+cgroup setting, which is set to the sum of both value (`memory +
+swap`).
+
+
+[[pct_mount_points]]
+Mount Points
+~~~~~~~~~~~~
+
+[thumbnail="gui-create-ct-root-disk.png"]
+
+The root mount point is configured with the `rootfs` property, and you can
+configure up to 10 additional mount points. The corresponding options
+are called `mp0` to `mp9`, and they can contain the following setting:
+
+include::pct-mountpoint-opts.adoc[]
+
+Currently there are basically three types of mount points: storage backed
+mount points, bind mounts and device mounts.
+
+.Typical container `rootfs` configuration
+----
+rootfs: thin1:base-100-disk-1,size=8G
+----
+
+
+Storage Backed Mount Points
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Storage backed mount points are managed by the {pve} storage subsystem and come
+in three different flavors:
+
+- Image based: these are raw images containing a single ext4 formatted file
+ system.
+- ZFS subvolumes: these are technically bind mounts, but with managed storage,
+ and thus allow resizing and snapshotting.
+- Directories: passing `size=0` triggers a special case where instead of a raw
+ image a directory is created.
+
+
+Bind Mount Points
+^^^^^^^^^^^^^^^^^
+
+Bind mounts allow you to access arbitrary directories from your Proxmox VE host
+inside a container. Some potential use cases are:
+
+- Accessing your home directory in the guest
+- Accessing an USB device directory in the guest
+- Accessing an NFS mount from the host in the guest
+
+Bind mounts are considered to not be managed by the storage subsystem, so you
+cannot make snapshots or deal with quotas from inside the container. With
+unprivileged containers you might run into permission problems caused by the
+user mapping and cannot use ACLs.
+
+NOTE: The contents of bind mount points are not backed up when using `vzdump`.
+
+WARNING: For security reasons, bind mounts should only be established
+using source directories especially reserved for this purpose, e.g., a
+directory hierarchy under `/mnt/bindmounts`. Never bind mount system
+directories like `/`, `/var` or `/etc` into a container - this poses a
+great security risk.
+
+NOTE: The bind mount source path must not contain any symlinks.
+
+For example, to make the directory `/mnt/bindmounts/shared` accessible in the
+container with ID `100` under the path `/shared`, use a configuration line like
+`mp0: /mnt/bindmounts/shared,mp=/shared` in `/etc/pve/lxc/100.conf`.
+Alternatively, use `pct set 100 -mp0 /mnt/bindmounts/shared,mp=/shared` to
+achieve the same result.
+
+
+Device Mount Points
+^^^^^^^^^^^^^^^^^^^
+
+Device mount points allow to mount block devices of the host directly into the
+container. Similar to bind mounts, device mounts are not managed by {PVE}'s
+storage subsystem, but the `quota` and `acl` options will be honored.
+
+NOTE: Device mount points should only be used under special circumstances. In
+most cases a storage backed mount point offers the same performance and a lot
+more features.
+
+NOTE: The contents of device mount points are not backed up when using `vzdump`.
+
+
+[[pct_container_network]]
+Network
+~~~~~~~
+
+[thumbnail="gui-create-ct-network.png"]
+
+You can configure up to 10 network interfaces for a single
+container. The corresponding options are called `net0` to `net9`, and
+they can contain the following setting:
+
+include::pct-network-opts.adoc[]
+
+
+[[pct_startup_and_shutdown]]
+Automatic Start and Shutdown of Containers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After creating your containers, you probably want them to start automatically
+when the host system boots. For this you need to select the option 'Start at
+boot' from the 'Options' Tab of your container in the web interface, or set it with
+the following command:
+
+ pct set <ctid> -onboot 1
+
+.Start and Shutdown Order
+// use the screenshot from qemu - its the same
+[thumbnail="gui-qemu-edit-start-order.png"]
+
+If you want to fine tune the boot order of your containers, you can use the following
+parameters :
+
+* *Start/Shutdown order*: Defines the start order priority. E.g. set it to 1 if
+you want the CT to be the first to be started. (We use the reverse startup
+order for shutdown, so a container with a start order of 1 would be the last to
+be shut down)
+* *Startup delay*: Defines the interval between this container start and subsequent
+containers starts . E.g. set it to 240 if you want to wait 240 seconds before starting
+other containers.
+* *Shutdown timeout*: Defines the duration in seconds {pve} should wait
+for the container to be offline after issuing a shutdown command.
+By default this value is set to 60, which means that {pve} will issue a
+shutdown request, wait 60s for the machine to be offline, and if after 60s
+the machine is still online will notify that the shutdown action failed.
+
+Please note that containers without a Start/Shutdown order parameter will always
+start after those where the parameter is set, and this parameter only
+makes sense between the machines running locally on a host, and not
+cluster-wide.
+
+
+Backup and Restore
+------------------
+
+
+Container Backup
+~~~~~~~~~~~~~~~~
+
+It is possible to use the `vzdump` tool for container backup. Please
+refer to the `vzdump` manual page for details.
+
+
+Restoring Container Backups
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Restoring container backups made with `vzdump` is possible using the
+`pct restore` command. By default, `pct restore` will attempt to restore as much
+of the backed up container configuration as possible. It is possible to override
+the backed up configuration by manually setting container options on the command
+line (see the `pct` manual page for details).
+
+NOTE: `pvesm extractconfig` can be used to view the backed up configuration
+contained in a vzdump archive.
+
+There are two basic restore modes, only differing by their handling of mount
+points:
+
+
+``Simple'' Restore Mode
+^^^^^^^^^^^^^^^^^^^^^^^