+
+[ATA only] Failed self-tests outdated by a newer successful extended
+self-test are ignored. The warning email counter is reset if the
+number of failed self tests dropped to 0. This typically happens when
+an extended self-test is run after all bad sectors have been reallocated.
+
+.I offlinests[,ns]
+\- [ATA only] report if the Offline Data Collection status has changed
+since the last check. The report will be logged as LOG_CRIT if the new
+status indicates an error. With some drives the status often changes,
+therefore \'\-l offlinests\' is not enabled by '\-a\' Directive.
+.\" %IF NOT OS Cygwin Windows
+.\"! Appending \',ns\' (no standby) to this directive is not implemented
+.\"! on OS_MAN_FILTER.
+.\" %ENDIF NOT OS Cygwin Windows
+.\" %IF OS Cygwin Windows
+
+[Windows and Cygwin only] If \',ns\' (no standby) is appended to this
+directive, smartd disables system auto standby as long as an Offline
+Data Collection is in progress. See \'\-l selfteststs,ns\' below.
+.\" %ENDIF OS Cygwin Windows
+
+.I selfteststs[,ns]
+\- [ATA only] report if the Self-Test execution status has changed
+since the last check. The report will be logged as LOG_CRIT if the new
+status indicates an error.
+.\" %IF NOT OS Cygwin Windows
+.\"! Appending \',ns\' (no standby) to this directive is not implemented
+.\"! on OS_MAN_FILTER.
+.\" %ENDIF NOT OS Cygwin Windows
+.\" %IF OS Cygwin Windows
+
+[Windows and Cygwin only] If \',ns\' (no standby) is appended to this
+directive, smartd disables system auto standby as long as a Self-Test
+is in progress. This prevents that a Self-Test is aborted because the
+OS sets the system to a standby/sleep mode when idle. Smartd check
+interval (\'\-i\' option) should be shorter than the configured idle
+timeout. Auto standby is not disabled if the system is running on
+battery.
+.\" %ENDIF OS Cygwin Windows
+
+.I scterc,READTIME,WRITETIME
+\- [ATA only] sets the SCT Error Recovery Control settings to the specified
+values (deciseconds) when \fBsmartd\fP starts up and has no further effect.
+Values of 0 disable the feature, other values less than 65 are probably
+not supported. For RAID configurations, this is typically set to
+70,70 deciseconds.
+[Please see the \fBsmartctl \-l scterc\fP command-line option.]
+.TP
+.B \-e NAME[,VALUE]
+Sets non-SMART device settings when \fBsmartd\fP starts up and has no
+further effect.
+[Please see the \fBsmartctl \-\-set\fP command-line option.]
+Valid arguments are:
+
+.I aam,[N|off]
+\- [ATA only] Sets the Automatic Acoustic Management (AAM) feature.
+
+.I apm,[N|off]
+\- [ATA only] Sets the Advanced Power Management (APM) feature.
+
+.I lookahead,[on|off]
+\- [ATA only] Sets the read look-ahead feature.
+
+.I security-freeze
+\- [ATA only] Sets ATA Security feature to frozen mode.
+
+.I standby,[N|off]
+\- [ATA only] Sets the standby (spindown) timer and places the drive in the
+IDLE mode.
+
+.I wcache,[on|off]
+\- [ATA only] Sets the volatile write cache feature.