# -*- Mode: makefile -*-
-GENERATED_HEADERS = config-target.h
-CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
-CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
-CONFIG_NO_XEN = $(if $(subst n,,$(CONFIG_XEN)),n,y)
-
include ../config-host.mak
-include config-devices.mak
include config-target.mak
+include config-devices.mak
include $(SRC_PATH)/rules.mak
-ifneq ($(HWDIR),)
-include $(HWDIR)/config.mak
-endif
-TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
-$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
+$(call set-vpath, $(SRC_PATH))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
-QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
-
-include $(SRC_PATH)/Makefile.objs
+QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target-$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
-QEMU_PROG=qemu-$(TARGET_ARCH2)
+QEMU_PROG=qemu-$(TARGET_NAME)
else
# system emulator name
-ifneq (,$(findstring -mwindows,$(LIBS)))
+ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
-QEMU_PROGW=qemu-system-$(TARGET_ARCH2)w$(EXESUF)
+QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
endif # windows executable
-QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
+QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
endif
PROGS=$(QEMU_PROG)
endif
STPFILES=
-ifndef CONFIG_HAIKU
-LIBS+=-lm
-endif
-
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
-stap: $(QEMU_PROG).stp
+stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
TARGET_TYPE=system
endif
-$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
+$(QEMU_PROG).stp-installed: $(SRC_PATH)/trace-events
$(call quiet-command,$(TRACETOOL) \
--format=stap \
--backend=$(TRACE_BACKEND) \
--binary=$(bindir)/$(QEMU_PROG) \
- --target-arch=$(TARGET_ARCH) \
+ --target-name=$(TARGET_NAME) \
+ --target-type=$(TARGET_TYPE) \
+ < $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp-installed")
+
+$(QEMU_PROG).stp: $(SRC_PATH)/trace-events
+ $(call quiet-command,$(TRACETOOL) \
+ --format=stap \
+ --backend=$(TRACE_BACKEND) \
+ --binary=$(realpath .)/$(QEMU_PROG) \
+ --target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
- < $< > $@," GEN $(QEMU_PROG).stp")
+ < $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp")
+
else
stap:
endif
#########################################################
# cpu emulator library
-libobj-y = exec.o translate-all.o cpu-exec.o translate.o
-libobj-y += tcg/tcg.o tcg/optimize.o
-libobj-$(CONFIG_TCG_INTERPRETER) += tci.o
-libobj-y += fpu/softfloat.o
-ifneq ($(TARGET_BASE_ARCH), sparc)
-ifneq ($(TARGET_BASE_ARCH), alpha)
-libobj-y += op_helper.o
-endif
-endif
-libobj-y += helper.o
-ifeq ($(TARGET_BASE_ARCH), i386)
-libobj-y += cpu.o
-endif
-libobj-$(TARGET_SPARC64) += vis_helper.o
-libobj-$(CONFIG_NEED_MMU) += mmu.o
-libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o
-libobj-$(TARGET_ARM) += cpu.o
-libobj-$(TARGET_CRIS) += cpu.o
-libobj-$(TARGET_LM32) += cpu.o
-libobj-$(TARGET_MICROBLAZE) += cpu.o
-libobj-$(TARGET_S390X) += cpu.o
-ifeq ($(TARGET_BASE_ARCH), sparc)
-libobj-y += fop_helper.o cc_helper.o win_helper.o mmu_helper.o ldst_helper.o
-libobj-y += cpu.o
-endif
-libobj-$(TARGET_SPARC) += int32_helper.o
-libobj-$(TARGET_SPARC64) += int64_helper.o
-libobj-$(TARGET_UNICORE32) += cpu.o
-libobj-$(TARGET_XTENSA) += cpu.o
-libobj-$(TARGET_ALPHA) += int_helper.o fpu_helper.o sys_helper.o mem_helper.o
-libobj-$(TARGET_ALPHA) += cpu.o
-
-libobj-y += disas.o
-libobj-$(CONFIG_TCI_DIS) += tci-dis.o
-
-tci-dis.o: QEMU_CFLAGS += -I$(SRC_PATH)/tcg -I$(SRC_PATH)/tcg/tci
-
-$(libobj-y): $(GENERATED_HEADERS)
-
-# HELPER_CFLAGS is used for all the legacy code compiled with static register
-# variables
-ifneq ($(TARGET_BASE_ARCH), sparc)
-op_helper.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
-endif
-user-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
-
-# Note: this is a workaround. The real fix is to avoid compiling
-# cpu_signal_handler() in user-exec.c.
-signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
+obj-y = exec.o translate-all.o cpu-exec.o
+obj-y += tcg/tcg.o tcg/optimize.o
+obj-$(CONFIG_TCG_INTERPRETER) += tci.o
+obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
+obj-y += fpu/softfloat.o
+obj-y += target-$(TARGET_BASE_ARCH)/
+obj-y += disas.o
+obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
+obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
-$(call set-vpath, $(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR))
-
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
-obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
- elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o \
- user-exec.o $(oslib-obj-y)
-
-obj-$(TARGET_HAS_BFLT) += flatload.o
-
-obj-$(TARGET_I386) += vm86.o
-
-obj-i386-y += ioport-user.o
-
-nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
-nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
-obj-arm-y += $(addprefix nwfpe/, $(nwfpe-obj-y))
-obj-arm-y += arm-semi.o
-obj-m68k-y += m68k-sim.o m68k-semi.o
-
-$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
-
-obj-y += $(addprefix ../, $(universal-obj-y))
-obj-y += $(addprefix ../libuser/, $(user-obj-y))
-obj-y += $(addprefix ../libdis-user/, $(libdis-y))
-obj-y += $(libobj-y)
+obj-y += linux-user/
+obj-y += gdbstub.o thunk.o user-exec.o
endif #CONFIG_LINUX_USER
-#########################################################
-# Darwin user emulator target
-
-ifdef CONFIG_DARWIN_USER
-
-$(call set-vpath, $(SRC_PATH)/darwin-user)
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
-
-# Leave some space for the regular program loading zone
-LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
-
-LIBS+=-lmx
-
-obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
- gdbstub.o user-exec.o
-
-obj-i386-y += ioport-user.o
-
-$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
-
-obj-y += $(addprefix ../, $(universal-obj-y))
-obj-y += $(addprefix ../libuser/, $(user-obj-y))
-obj-y += $(addprefix ../libdis-user/, $(libdis-y))
-obj-y += $(libobj-y)
-
-endif #CONFIG_DARWIN_USER
-
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
-$(call set-vpath, $(SRC_PATH)/bsd-user)
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
-
-obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
- gdbstub.o uaccess.o user-exec.o
+QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR)
-obj-i386-y += ioport-user.o
-
-$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
-
-obj-y += $(addprefix ../, $(universal-obj-y))
-obj-y += $(addprefix ../libuser/, $(user-obj-y))
-obj-y += $(addprefix ../libdis-user/, $(libdis-y))
-obj-y += $(libobj-y)
+obj-y += bsd-user/
+obj-y += gdbstub.o user-exec.o
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
-
-obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o ioport.o
-# virtio has to be here due to weird dependency between PCI and virtio-net.
-# need to fix this properly
-obj-$(CONFIG_NO_PCI) += pci-stub.o
-obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
-obj-$(CONFIG_VIRTIO) += virtio-scsi.o
-obj-y += vhost_net.o
-obj-$(CONFIG_VHOST_NET) += vhost.o
-obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/virtio-9p-device.o
-obj-$(CONFIG_KVM) += kvm.o kvm-all.o
-obj-$(CONFIG_NO_KVM) += kvm-stub.o
-obj-$(CONFIG_VGA) += vga.o
-obj-y += memory.o savevm.o
-LIBS+=-lz
-
-obj-i386-$(CONFIG_KVM) += hyperv.o
-
-QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
-QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
-QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
-QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
+obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o
+obj-y += qtest.o
+obj-y += hw/
+obj-$(CONFIG_FDT) += device_tree.o
+obj-$(CONFIG_KVM) += kvm-all.o
+obj-y += memory.o savevm.o cputlb.o
+obj-y += memory_mapping.o
+obj-y += dump.o
+LIBS+=$(libs_softmmu)
# xen support
-obj-$(CONFIG_XEN) += xen-all.o xen_machine_pv.o xen_domainbuild.o xen-mapcache.o
-obj-$(CONFIG_NO_XEN) += xen-stub.o
-
-obj-i386-$(CONFIG_XEN) += xen_platform.o xen_apic.o
-
-# Inter-VM PCI shared memory
-CONFIG_IVSHMEM =
-ifeq ($(CONFIG_KVM), y)
- ifeq ($(CONFIG_PCI), y)
- CONFIG_IVSHMEM = y
- endif
-endif
-obj-$(CONFIG_IVSHMEM) += ivshmem.o
-
-# Generic hotplugging
-obj-y += device-hotplug.o
+obj-$(CONFIG_XEN) += xen-all.o xen-mapcache.o
+obj-$(call lnot,$(CONFIG_XEN)) += xen-stub.o
# Hardware support
-obj-i386-y += mc146818rtc.o pc.o
-obj-i386-y += apic_common.o apic.o kvmvapic.o
-obj-i386-y += sga.o ioapic_common.o ioapic.o piix_pci.o
-obj-i386-y += vmport.o
-obj-i386-y += pci-hotplug.o smbios.o wdt_ib700.o
-obj-i386-y += debugcon.o multiboot.o
-obj-i386-y += pc_piix.o
-obj-i386-y += pc_sysfw.o
-obj-i386-$(CONFIG_KVM) += kvm/clock.o kvm/apic.o kvm/i8259.o kvm/ioapic.o kvm/i8254.o
-obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
-
-# shared objects
-obj-ppc-y = ppc.o ppc_booke.o
-# PREP target
-obj-ppc-y += mc146818rtc.o
-obj-ppc-y += ppc_prep.o
-# OldWorld PowerMac
-obj-ppc-y += ppc_oldworld.o
-# NewWorld PowerMac
-obj-ppc-y += ppc_newworld.o
-# IBM pSeries (sPAPR)
-obj-ppc-$(CONFIG_PSERIES) += spapr.o spapr_hcall.o spapr_rtas.o spapr_vio.o
-obj-ppc-$(CONFIG_PSERIES) += xics.o spapr_vty.o spapr_llan.o spapr_vscsi.o
-obj-ppc-$(CONFIG_PSERIES) += spapr_pci.o device-hotplug.o pci-hotplug.o
-# PowerPC 4xx boards
-obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
-obj-ppc-y += ppc440_bamboo.o
-# PowerPC E500 boards
-obj-ppc-y += ppce500_mpc8544ds.o mpc8544_guts.o ppce500_spin.o
-# PowerPC 440 Xilinx ML507 reference board.
-obj-ppc-y += virtex_ml507.o
-obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
-obj-ppc-$(CONFIG_FDT) += device_tree.o
-# PowerPC OpenPIC
-obj-ppc-y += openpic.o
-
-# Xilinx PPC peripherals
-obj-ppc-y += xilinx_intc.o
-obj-ppc-y += xilinx_timer.o
-obj-ppc-y += xilinx_uartlite.o
-obj-ppc-y += xilinx_ethlite.o
-
-# LM32 boards
-obj-lm32-y += lm32_boards.o
-obj-lm32-y += milkymist.o
-
-# LM32 peripherals
-obj-lm32-y += lm32_pic.o
-obj-lm32-y += lm32_juart.o
-obj-lm32-y += lm32_timer.o
-obj-lm32-y += lm32_uart.o
-obj-lm32-y += lm32_sys.o
-obj-lm32-y += milkymist-ac97.o
-obj-lm32-y += milkymist-hpdmc.o
-obj-lm32-y += milkymist-memcard.o
-obj-lm32-y += milkymist-minimac2.o
-obj-lm32-y += milkymist-pfpu.o
-obj-lm32-y += milkymist-softusb.o
-obj-lm32-y += milkymist-sysctl.o
-obj-lm32-$(CONFIG_OPENGL) += milkymist-tmu2.o
-obj-lm32-y += milkymist-uart.o
-obj-lm32-y += milkymist-vgafb.o
-obj-lm32-y += framebuffer.o
-
-obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
-obj-mips-y += mips_addr.o mips_timer.o mips_int.o
-obj-mips-y += gt64xxx.o mc146818rtc.o
-obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
-
-obj-microblaze-y = petalogix_s3adsp1800_mmu.o
-obj-microblaze-y += petalogix_ml605_mmu.o
-obj-microblaze-y += microblaze_boot.o
-
-obj-microblaze-y += microblaze_pic_cpu.o
-obj-microblaze-y += xilinx_intc.o
-obj-microblaze-y += xilinx_timer.o
-obj-microblaze-y += xilinx_uartlite.o
-obj-microblaze-y += xilinx_ethlite.o
-obj-microblaze-y += xilinx_axidma.o
-obj-microblaze-y += xilinx_axienet.o
-
-obj-microblaze-$(CONFIG_FDT) += device_tree.o
-
-# Boards
-obj-cris-y = cris_pic_cpu.o
-obj-cris-y += cris-boot.o
-obj-cris-y += axis_dev88.o
-
-# IO blocks
-obj-cris-y += etraxfs_dma.o
-obj-cris-y += etraxfs_pic.o
-obj-cris-y += etraxfs_eth.o
-obj-cris-y += etraxfs_timer.o
-obj-cris-y += etraxfs_ser.o
-
-ifeq ($(TARGET_ARCH), sparc64)
-obj-sparc-y = sun4u.o apb_pci.o
-obj-sparc-y += mc146818rtc.o
+ifeq ($(TARGET_NAME), sparc64)
+obj-y += hw/sparc64/
else
-obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
-obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
-obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o leon3.o
-
-# GRLIB
-obj-sparc-y += grlib_gptimer.o grlib_irqmp.o grlib_apbuart.o
+obj-y += hw/$(TARGET_BASE_ARCH)/
endif
-obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
-obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
-obj-arm-y += versatile_pci.o
-obj-arm-y += versatile_i2c.o
-obj-arm-y += cadence_uart.o
-obj-arm-y += cadence_ttc.o
-obj-arm-y += cadence_gem.o
-obj-arm-y += xilinx_zynq.o zynq_slcr.o
-obj-arm-y += arm_gic.o
-obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
-obj-arm-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
-obj-arm-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
-obj-arm-y += exynos4210_pmu.o exynos4210_mct.o exynos4210_fimd.o
-obj-arm-y += arm_l2x0.o
-obj-arm-y += arm_mptimer.o a15mpcore.o
-obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
-obj-arm-y += highbank.o
-obj-arm-y += pl061.o
-obj-arm-y += xgmac.o
-obj-arm-y += arm-semi.o
-obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
-obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
-obj-arm-y += gumstix.o
-obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
-obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
- omap_gpio.o omap_intc.o omap_uart.o
-obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
- omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
-obj-arm-y += omap_sx1.o palm.o tsc210x.o
-obj-arm-y += nseries.o blizzard.o onenand.o cbus.o tusb6010.o usb/hcd-musb.o
-obj-arm-y += mst_fpga.o mainstone.o
-obj-arm-y += z2.o
-obj-arm-y += musicpal.o bitbang_i2c.o marvell_88w8618_audio.o
-obj-arm-y += framebuffer.o
-obj-arm-y += vexpress.o
-obj-arm-y += strongarm.o
-obj-arm-y += collie.o
-obj-arm-y += pl041.o lm4549.o
-obj-arm-$(CONFIG_FDT) += device_tree.o
-
-obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
-obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
-obj-sh4-y += ide/mmio.o
-
-obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
-obj-m68k-y += m68k-semi.o dummy_m68k.o
-
-obj-s390x-y = s390-virtio-bus.o s390-virtio.o
-
-obj-alpha-y = mc146818rtc.o
-obj-alpha-y += alpha_pci.o alpha_dp264.o alpha_typhoon.o
-
-obj-xtensa-y += xtensa_pic.o
-obj-xtensa-y += xtensa_sim.o
-obj-xtensa-y += xtensa_lx60.o
-obj-xtensa-y += xtensa-semi.o
-obj-xtensa-y += core-dc232b.o
-obj-xtensa-y += core-dc233c.o
-obj-xtensa-y += core-fsf.o
-
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
-monitor.o: hmp-commands.h qmp-commands-old.h
+GENERATED_HEADERS += hmp-commands.h qmp-commands-old.h
+
+endif # CONFIG_SOFTMMU
-$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
+# Workaround for http://gcc.gnu.org/PR55489, see configure.
+%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
-obj-y += $(addprefix ../, $(universal-obj-y))
-obj-y += $(addprefix ../, $(common-obj-y))
-obj-y += $(addprefix ../libdis/, $(libdis-y))
-obj-y += $(libobj-y)
-obj-y += $(addprefix $(HWDIR)/, $(hw-obj-y))
-obj-y += $(addprefix ../, $(trace-obj-y))
+nested-vars += obj-y
-endif # CONFIG_SOFTMMU
+# This resolves all nested paths, so it must come last
+include $(SRC_PATH)/Makefile.objs
-ifndef CONFIG_LINUX_USER
-ifndef CONFIG_BSD_USER
-# libcacard needs qemu-thread support, and besides is only needed by devices
-# so not requires with linux-user / bsd-user targets
-obj-$(CONFIG_SMARTCARD_NSS) += $(addprefix ../libcacard/, $(libcacard-y))
-endif # CONFIG_BSD_USER
-endif # CONFIG_LINUX_USER
+all-obj-y = $(obj-y)
+all-obj-y += $(addprefix ../, $(common-obj-y))
-obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
+ifndef CONFIG_HAIKU
+LIBS+=-lm
+endif
ifdef QEMU_PROGW
# The linker builds a windows executable. Make also a console executable.
-$(QEMU_PROGW): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
+$(QEMU_PROGW): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
$(call LINK,$^)
$(QEMU_PROG): $(QEMU_PROGW)
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
else
-$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
+$(QEMU_PROG): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
$(call LINK,$^)
endif
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
- rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
- rm -f *.d */*.d tcg/*.o ide/*.o 9pfs/*.o kvm/*.o
+ rm -f *.a *~ $(PROGS)
+ rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
- $(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
+ $(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
endif
-# Include automatically generated dependency files
--include $(wildcard *.d */*.d)
+GENERATED_HEADERS += config-target.h
+Makefile: $(GENERATED_HEADERS)
projects / qemu.git / blobdiff