/** @file\r
BDS library definition, include the file and data structure\r
\r
-Copyright (c) 2004 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>\r
(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
#include <IndustryStandard/PeImage.h>\r
#include <IndustryStandard/Atapi.h>\r
#include <IndustryStandard/Scsi.h>\r
+#include <IndustryStandard/Nvme.h>\r
\r
#include <Protocol/PciRootBridgeIo.h>\r
#include <Protocol/BlockIo.h>\r
#include <Protocol/GraphicsOutput.h>\r
#include <Protocol/UsbIo.h>\r
#include <Protocol/DiskInfo.h>\r
+#include <Protocol/NvmExpressPassthru.h>\r
#include <Protocol/IdeControllerInit.h>\r
#include <Protocol/BootLogo.h>\r
#include <Protocol/DriverHealth.h>\r
#include <Protocol/FormBrowser2.h>\r
#include <Protocol/VariableLock.h>\r
+#include <Protocol/RamDisk.h>\r
+#include <Protocol/DeferredImageLoad.h>\r
\r
-#include <Guid/ZeroGuid.h>\r
#include <Guid/MemoryTypeInformation.h>\r
#include <Guid/FileInfo.h>\r
#include <Guid/GlobalVariable.h>\r
-#include <Guid/Performance.h>\r
#include <Guid/StatusCodeDataTypeVariable.h>\r
\r
#include <Library/PrintLib.h>\r
#include <Library/PcdLib.h>\r
#include <Library/PeCoffGetEntryPointLib.h>\r
#include <Library/UefiBootManagerLib.h>\r
-#include <Library/TimerLib.h>\r
#include <Library/DxeServicesLib.h>\r
#include <Library/ReportStatusCodeLib.h>\r
#include <Library/CapsuleLib.h>\r
BmMessageSataBoot,\r
BmMessageUsbBoot,\r
BmMessageScsiBoot,\r
- BmMessageNetworkBoot,\r
- BmMessageHttpBoot,\r
BmMiscBoot\r
} BM_BOOT_TYPE;\r
\r
#define BM_OPTION_NAME_LEN sizeof ("PlatformRecovery####")\r
extern CHAR16 *mBmLoadOptionName[];\r
\r
+//\r
+// Maximum number of reconnect retry to repair controller; it is to limit the\r
+// number of recursive call of BmRepairAllControllers.\r
+//\r
+#define MAX_RECONNECT_REPAIR 10\r
+\r
/**\r
Visitor function to be called by BmForEachVariable for each variable\r
in variable storage.\r
\r
/**\r
Repair all the controllers according to the Driver Health status queried.\r
+\r
+ @param ReconnectRepairCount To record the number of recursive call of\r
+ this function itself.\r
**/\r
VOID\r
BmRepairAllControllers (\r
- VOID\r
+ UINTN ReconnectRepairCount\r
);\r
\r
#define BM_HOTKEY_SIGNATURE SIGNATURE_32 ('b', 'm', 'h', 'k')\r
\r
#define BM_HOTKEY_FROM_LINK(a) CR (a, BM_HOTKEY, Link, BM_HOTKEY_SIGNATURE)\r
\r
-/**\r
- Get the image file buffer data and buffer size by its device path. \r
-\r
- @param FilePath On input, a pointer to an allocated buffer containing the device\r
- path of the file.\r
- On output the pointer could be NULL when the function fails to\r
- load the boot option, or could point to an allocated buffer containing\r
- the device path of the file.\r
- It could be updated by either short-form device path expanding,\r
- or default boot file path appending.\r
- Caller is responsible to free it when it's non-NULL.\r
- @param FileSize A pointer to the size of the file buffer.\r
-\r
- @retval NULL File is NULL, or FileSize is NULL. Or, the file can't be found.\r
- @retval other The file buffer. The caller is responsible to free the memory.\r
-**/\r
-VOID *\r
-BmLoadEfiBootOption (\r
- IN OUT EFI_DEVICE_PATH_PROTOCOL **FilePath,\r
- OUT UINTN *FileSize\r
- );\r
-\r
/**\r
Get the Option Number that wasn't used.\r
\r
);\r
\r
/**\r
-\r
- Writes performance data of booting into the allocated memory.\r
- OS can process these records.\r
-\r
- @param Event The triggered event.\r
- @param Context Context for this event.\r
-\r
-**/\r
-VOID\r
-EFIAPI\r
-BmWriteBootToOsPerformanceData (\r
- IN EFI_EVENT Event,\r
- IN VOID *Context\r
- );\r
-\r
-\r
-/**\r
- Get the headers (dos, image, optional header) from an image\r
-\r
- @param Device SimpleFileSystem device handle\r
- @param FileName File name for the image\r
- @param DosHeader Pointer to dos header\r
- @param Hdr The buffer in which to return the PE32, PE32+, or TE header.\r
-\r
- @retval EFI_SUCCESS Successfully get the machine type.\r
- @retval EFI_NOT_FOUND The file is not found.\r
- @retval EFI_LOAD_ERROR File is not a valid image file.\r
-\r
-**/\r
-EFI_STATUS\r
-BmGetImageHeader (\r
- IN EFI_HANDLE Device,\r
- IN CHAR16 *FileName,\r
- OUT EFI_IMAGE_DOS_HEADER *DosHeader,\r
- OUT EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr\r
- );\r
-\r
-/**\r
- This routine adjust the memory information for different memory type and \r
+ This routine adjust the memory information for different memory type and\r
save them into the variables for next boot. It resets the system when\r
memory information is updated and the current boot option belongs to\r
- boot category instead of application category.\r
+ boot category instead of application category. It doesn't count the\r
+ reserved memory occupied by RAM Disk.\r
\r
- @param Boot TRUE if current boot option belongs to boot category instead of\r
- application category.\r
+ @param Boot TRUE if current boot option belongs to boot\r
+ category instead of application category.\r
**/\r
VOID\r
BmSetMemoryTypeInformationVariable (\r
\r
/**\r
Stop the hotkey processing.\r
- \r
- @param Event Event pointer related to hotkey service. \r
- @param Context Context pass to this function. \r
+\r
+ @param Event Event pointer related to hotkey service.\r
+ @param Context Context pass to this function.\r
**/\r
VOID\r
EFIAPI\r
then EFI_INVALID_PARAMETER is returned.\r
@param VendorGuid A unique identifier for the vendor.\r
@param Attributes Attributes bitmask to set for the variable.\r
- @param DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE, \r
- EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS, or \r
- EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero \r
- causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is \r
- set, then a SetVariable() call with a DataSize of zero will not cause any change to \r
- the variable value (the timestamp associated with the variable may be updated however \r
- even if no new data value is provided,see the description of the \r
- EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not \r
- be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated). \r
+ @param DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE,\r
+ or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero\r
+ causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is\r
+ set, then a SetVariable() call with a DataSize of zero will not cause any change to\r
+ the variable value (the timestamp associated with the variable may be updated however\r
+ even if no new data value is provided,see the description of the\r
+ EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not\r
+ be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated).\r
@param Data The contents for the variable.\r
\r
@retval EFI_SUCCESS The firmware has successfully stored the variable and its data as\r
@retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.\r
@retval EFI_WRITE_PROTECTED The variable in question is read-only.\r
@retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.\r
- @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS \r
- or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set, but the AuthInfo \r
- does NOT pass the validation check carried out by the firmware.\r
+ @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS\r
+ being set, but the AuthInfo does NOT pass the validation check carried out by the firmware.\r
\r
@retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.\r
**/\r
IN VOID *Data\r
);\r
\r
-/**\r
- Get the load option by its device path.\r
-\r
- @param FilePath The device path pointing to a load option.\r
- It could be a short-form device path.\r
- @param FullPath Return the full device path of the load option after\r
- short-form device path expanding.\r
- Caller is responsible to free it.\r
- @param FileSize Return the load option size.\r
-\r
- @return The load option buffer. Caller is responsible to free the memory.\r
-**/\r
-VOID *\r
-BmGetLoadOptionBuffer (\r
- IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
- OUT EFI_DEVICE_PATH_PROTOCOL **FullPath,\r
- OUT UINTN *FileSize\r
- );\r
-\r
-/**\r
- Return whether the PE header of the load option is valid or not.\r
-\r
- @param[in] Type The load option type.\r
- @param[in] FileBuffer The PE file buffer of the load option.\r
- @param[in] FileSize The size of the load option file.\r
-\r
- @retval TRUE The PE header of the load option is valid.\r
- @retval FALSE The PE header of the load option is not valid.\r
-**/\r
-BOOLEAN\r
-BmIsLoadOptionPeHeaderValid (\r
- IN EFI_BOOT_MANAGER_LOAD_OPTION_TYPE Type,\r
- IN VOID *FileBuffer,\r
- IN UINTN FileSize\r
- );\r
-\r
/**\r
Function compares a device path data structure to that of all the nodes of a\r
second device path instance.\r
IN EFI_DEVICE_PATH_PROTOCOL *Single\r
);\r
\r
-/**\r
- Repair all the controllers according to the Driver Health status queried.\r
-**/\r
-VOID\r
-BmRepairAllControllers (\r
- VOID\r
- );\r
-\r
/**\r
Print the device path info.\r
\r
IN CHAR16 Char\r
);\r
\r
+/**\r
+ Return the boot description for the controller.\r
+\r
+ @param Handle Controller handle.\r
+\r
+ @return The description string.\r
+**/\r
+CHAR16 *\r
+BmGetBootDescription (\r
+ IN EFI_HANDLE Handle\r
+ );\r
+\r
+/**\r
+ Enumerate all boot option descriptions and append " 2"/" 3"/... to make\r
+ unique description.\r
+\r
+ @param BootOptions Array of boot options.\r
+ @param BootOptionCount Count of boot options.\r
+**/\r
+VOID\r
+BmMakeBootOptionDescriptionUnique (\r
+ EFI_BOOT_MANAGER_LOAD_OPTION *BootOptions,\r
+ UINTN BootOptionCount\r
+ );\r
+\r
+/**\r
+ Get the file buffer from the specified Load File instance.\r
+\r
+ @param LoadFileHandle The specified Load File instance.\r
+ @param FilePath The file path which will pass to LoadFile().\r
+\r
+ @return The full device path pointing to the load option buffer.\r
+**/\r
+EFI_DEVICE_PATH_PROTOCOL *\r
+BmExpandLoadFile (\r
+ IN EFI_HANDLE LoadFileHandle,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath\r
+ );\r
+\r
+/**\r
+ Return the RAM Disk device path created by LoadFile.\r
+\r
+ @param FilePath The source file path.\r
+\r
+ @return Callee-to-free RAM Disk device path\r
+**/\r
+EFI_DEVICE_PATH_PROTOCOL *\r
+BmGetRamDiskDevicePath (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath\r
+ );\r
+\r
+/**\r
+ Destroy the RAM Disk.\r
+\r
+ The destroy operation includes to call RamDisk.Unregister to\r
+ unregister the RAM DISK from RAM DISK driver, free the memory\r
+ allocated for the RAM Disk.\r
+\r
+ @param RamDiskDevicePath RAM Disk device path.\r
+**/\r
+VOID\r
+BmDestroyRamDisk (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RamDiskDevicePath\r
+ );\r
+\r
+/**\r
+ Get the next possible full path pointing to the load option.\r
+\r
+ @param FilePath The device path pointing to a load option.\r
+ It could be a short-form device path.\r
+ @param FullPath The full path returned by the routine in last call.\r
+ Set to NULL in first call.\r
+\r
+ @return The next possible full path pointing to the load option.\r
+ Caller is responsible to free the memory.\r
+**/\r
+EFI_DEVICE_PATH_PROTOCOL *\r
+BmGetNextLoadOptionDevicePath (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FullPath\r
+ );\r
+\r
+/**\r
+ Return the next matched load option buffer.\r
+ The routine keeps calling BmGetNextLoadOptionDevicePath() until a valid\r
+ load option is read.\r
+\r
+ @param Type The load option type.\r
+ It's used to check whether the load option is valid.\r
+ When it's LoadOptionTypeMax, the routine only guarantees\r
+ the load option is a valid PE image but doesn't guarantee\r
+ the PE's subsystem type is valid.\r
+ @param FilePath The device path pointing to a load option.\r
+ It could be a short-form device path.\r
+ @param FullPath Return the next full device path of the load option after\r
+ short-form device path expanding.\r
+ Caller is responsible to free it.\r
+ NULL to return the first matched full device path.\r
+ @param FileSize Return the load option size.\r
+\r
+ @return The load option buffer. Caller is responsible to free the memory.\r
+**/\r
+VOID *\r
+BmGetNextLoadOptionBuffer (\r
+ IN EFI_BOOT_MANAGER_LOAD_OPTION_TYPE Type,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
+ OUT EFI_DEVICE_PATH_PROTOCOL **FullPath,\r
+ OUT UINTN *FileSize\r
+ );\r
#endif // _INTERNAL_BM_H_\r