Provides library functions to access SMBUS devices. Libraries of this class\r
must be ported to a specific SMBUS controller.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
@param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC \r
**/\r
-#define SMBUS_LIB_RESERVED(SmBusAddress) ((SmBusAddress) & ~(((1 << 22) - 2) | BIT22))\r
+#define SMBUS_LIB_RESERVED(SmBusAddress) ((SmBusAddress) & ~(BIT23 - 2))\r
\r
/**\r
Executes an SMBUS quick read command.\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
**/\r
VOID\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
**/\r
VOID\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The byte received from the SMBUS.\r
\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 8-bit value to send.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 8-bit value to send.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The parameter of Value.\r
\r
\r
@param SmBusAddress Address that encodes the SMBUS Slave Address,\r
SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The byte read from the SMBUS.\r
\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 8-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 8-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The parameter of Value.\r
\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The byte read from the SMBUS.\r
\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 16-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 16-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The parameter of Value.\r
\r
If Length in SmBusAddress is not zero, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 16-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 16-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The 16-bit value returned by the process call command.\r
\r
If Buffer is NULL, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_SUCCESS The SMBUS command was executed.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The number of bytes read.\r
\r
If Buffer is NULL, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The number of bytes written.\r
\r
If ReadBuffer is NULL, then ASSERT().\r
If any reserved bits of SmBusAddress are set, then ASSERT().\r
\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.\r
- @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.\r
+ @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+ RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
+ RETURN_DEVICE_ERROR The request was not completed because a failure\r
+ reflected in the Host Status Register bit. Device errors are a result\r
+ of a transaction collision, illegal command field, unclaimed cycle\r
+ (host initiated), or bus errors (collisions).\r
+ RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ RETURN_UNSUPPORTED The SMBus operation is not supported.\r
\r
@return The number of bytes written.\r
\r
projects / mirror_edk2.git / blobdiff