//\r
// The package level header files this module uses\r
//\r
+#include <IndustryStandard/E820.h>\r
+#include <IndustryStandard/Q35MchIch9.h>\r
#include <PiPei.h>\r
\r
//\r
// The Library classes this module consumes\r
//\r
+#include <Library/BaseLib.h>\r
#include <Library/BaseMemoryLib.h>\r
#include <Library/DebugLib.h>\r
#include <Library/HobLib.h>\r
#include <Library/IoLib.h>\r
#include <Library/PcdLib.h>\r
+#include <Library/PciLib.h>\r
#include <Library/PeimEntryPoint.h>\r
#include <Library/ResourcePublicationLib.h>\r
#include <Library/MtrrLib.h>\r
STATIC UINT32 mS3AcpiReservedMemoryBase;\r
STATIC UINT32 mS3AcpiReservedMemorySize;\r
\r
+STATIC UINT16 mQ35TsegMbytes;\r
+\r
+VOID\r
+Q35TsegMbytesInitialization (\r
+ VOID\r
+ )\r
+{\r
+ UINT16 ExtendedTsegMbytes;\r
+ RETURN_STATUS PcdStatus;\r
+\r
+ if (mHostBridgeDevId != INTEL_Q35_MCH_DEVICE_ID) {\r
+ DEBUG ((\r
+ DEBUG_ERROR,\r
+ "%a: no TSEG (SMRAM) on host bridge DID=0x%04x; "\r
+ "only DID=0x%04x (Q35) is supported\n",\r
+ __FUNCTION__,\r
+ mHostBridgeDevId,\r
+ INTEL_Q35_MCH_DEVICE_ID\r
+ ));\r
+ ASSERT (FALSE);\r
+ CpuDeadLoop ();\r
+ }\r
+\r
+ //\r
+ // Check if QEMU offers an extended TSEG.\r
+ //\r
+ // This can be seen from writing MCH_EXT_TSEG_MB_QUERY to the MCH_EXT_TSEG_MB\r
+ // register, and reading back the register.\r
+ //\r
+ // On a QEMU machine type that does not offer an extended TSEG, the initial\r
+ // write overwrites whatever value a malicious guest OS may have placed in\r
+ // the (unimplemented) register, before entering S3 or rebooting.\r
+ // Subsequently, the read returns MCH_EXT_TSEG_MB_QUERY unchanged.\r
+ //\r
+ // On a QEMU machine type that offers an extended TSEG, the initial write\r
+ // triggers an update to the register. Subsequently, the value read back\r
+ // (which is guaranteed to differ from MCH_EXT_TSEG_MB_QUERY) tells us the\r
+ // number of megabytes.\r
+ //\r
+ PciWrite16 (DRAMC_REGISTER_Q35 (MCH_EXT_TSEG_MB), MCH_EXT_TSEG_MB_QUERY);\r
+ ExtendedTsegMbytes = PciRead16 (DRAMC_REGISTER_Q35 (MCH_EXT_TSEG_MB));\r
+ if (ExtendedTsegMbytes == MCH_EXT_TSEG_MB_QUERY) {\r
+ mQ35TsegMbytes = PcdGet16 (PcdQ35TsegMbytes);\r
+ return;\r
+ }\r
+\r
+ DEBUG ((\r
+ DEBUG_INFO,\r
+ "%a: QEMU offers an extended TSEG (%d MB)\n",\r
+ __FUNCTION__,\r
+ ExtendedTsegMbytes\r
+ ));\r
+ PcdStatus = PcdSet16S (PcdQ35TsegMbytes, ExtendedTsegMbytes);\r
+ ASSERT_RETURN_ERROR (PcdStatus);\r
+ mQ35TsegMbytes = ExtendedTsegMbytes;\r
+}\r
+\r
+\r
+/**\r
+ Iterate over the RAM entries in QEMU's fw_cfg E820 RAM map that start outside\r
+ of the 32-bit address range.\r
+\r
+ Find the highest exclusive >=4GB RAM address, or produce memory resource\r
+ descriptor HOBs for RAM entries that start at or above 4GB.\r
+\r
+ @param[out] MaxAddress If MaxAddress is NULL, then ScanOrAdd64BitE820Ram()\r
+ produces memory resource descriptor HOBs for RAM\r
+ entries that start at or above 4GB.\r
+\r
+ Otherwise, MaxAddress holds the highest exclusive\r
+ >=4GB RAM address on output. If QEMU's fw_cfg E820\r
+ RAM map contains no RAM entry that starts outside of\r
+ the 32-bit address range, then MaxAddress is exactly\r
+ 4GB on output.\r
+\r
+ @retval EFI_SUCCESS The fw_cfg E820 RAM map was found and processed.\r
+\r
+ @retval EFI_PROTOCOL_ERROR The RAM map was found, but its size wasn't a\r
+ whole multiple of sizeof(EFI_E820_ENTRY64). No\r
+ RAM entry was processed.\r
+\r
+ @return Error codes from QemuFwCfgFindFile(). No RAM\r
+ entry was processed.\r
+**/\r
+STATIC\r
+EFI_STATUS\r
+ScanOrAdd64BitE820Ram (\r
+ OUT UINT64 *MaxAddress OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ FIRMWARE_CONFIG_ITEM FwCfgItem;\r
+ UINTN FwCfgSize;\r
+ EFI_E820_ENTRY64 E820Entry;\r
+ UINTN Processed;\r
+\r
+ Status = QemuFwCfgFindFile ("etc/e820", &FwCfgItem, &FwCfgSize);\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+ if (FwCfgSize % sizeof E820Entry != 0) {\r
+ return EFI_PROTOCOL_ERROR;\r
+ }\r
+\r
+ if (MaxAddress != NULL) {\r
+ *MaxAddress = BASE_4GB;\r
+ }\r
+\r
+ QemuFwCfgSelectItem (FwCfgItem);\r
+ for (Processed = 0; Processed < FwCfgSize; Processed += sizeof E820Entry) {\r
+ QemuFwCfgReadBytes (sizeof E820Entry, &E820Entry);\r
+ DEBUG ((\r
+ DEBUG_VERBOSE,\r
+ "%a: Base=0x%Lx Length=0x%Lx Type=%u\n",\r
+ __FUNCTION__,\r
+ E820Entry.BaseAddr,\r
+ E820Entry.Length,\r
+ E820Entry.Type\r
+ ));\r
+ if (E820Entry.Type == EfiAcpiAddressRangeMemory &&\r
+ E820Entry.BaseAddr >= BASE_4GB) {\r
+ if (MaxAddress == NULL) {\r
+ UINT64 Base;\r
+ UINT64 End;\r
+\r
+ //\r
+ // Round up the start address, and round down the end address.\r
+ //\r
+ Base = ALIGN_VALUE (E820Entry.BaseAddr, (UINT64)EFI_PAGE_SIZE);\r
+ End = (E820Entry.BaseAddr + E820Entry.Length) &\r
+ ~(UINT64)EFI_PAGE_MASK;\r
+ if (Base < End) {\r
+ AddMemoryRangeHob (Base, End);\r
+ DEBUG ((\r
+ DEBUG_VERBOSE,\r
+ "%a: AddMemoryRangeHob [0x%Lx, 0x%Lx)\n",\r
+ __FUNCTION__,\r
+ Base,\r
+ End\r
+ ));\r
+ }\r
+ } else {\r
+ UINT64 Candidate;\r
+\r
+ Candidate = E820Entry.BaseAddr + E820Entry.Length;\r
+ if (Candidate > *MaxAddress) {\r
+ *MaxAddress = Candidate;\r
+ DEBUG ((\r
+ DEBUG_VERBOSE,\r
+ "%a: MaxAddress=0x%Lx\n",\r
+ __FUNCTION__,\r
+ *MaxAddress\r
+ ));\r
+ }\r
+ }\r
+ }\r
+ }\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+\r
UINT32\r
GetSystemMemorySizeBelow4gb (\r
VOID\r
FIRMWARE_CONFIG_ITEM FwCfgItem;\r
UINTN FwCfgSize;\r
UINT64 HotPlugMemoryEnd;\r
+ RETURN_STATUS PcdStatus;\r
\r
- FirstNonAddress = BASE_4GB + GetSystemMemorySizeAbove4gb ();\r
+ //\r
+ // set FirstNonAddress to suppress incorrect compiler/analyzer warnings\r
+ //\r
+ FirstNonAddress = 0;\r
+\r
+ //\r
+ // If QEMU presents an E820 map, then get the highest exclusive >=4GB RAM\r
+ // address from it. This can express an address >= 4GB+1TB.\r
+ //\r
+ // Otherwise, get the flat size of the memory above 4GB from the CMOS (which\r
+ // can only express a size smaller than 1TB), and add it to 4GB.\r
+ //\r
+ Status = ScanOrAdd64BitE820Ram (&FirstNonAddress);\r
+ if (EFI_ERROR (Status)) {\r
+ FirstNonAddress = BASE_4GB + GetSystemMemorySizeAbove4gb ();\r
+ }\r
\r
//\r
// If DXE is 32-bit, then we're done; PciBusDxe will degrade 64-bit MMIO\r
if (mBootMode != BOOT_ON_S3_RESUME) {\r
DEBUG ((EFI_D_INFO, "%a: disabling 64-bit PCI host aperture\n",\r
__FUNCTION__));\r
- PcdSet64 (PcdPciMmio64Size, 0);\r
+ PcdStatus = PcdSet64S (PcdPciMmio64Size, 0);\r
+ ASSERT_RETURN_ERROR (PcdStatus);\r
}\r
\r
//\r
if (!EFI_ERROR (Status) && FwCfgSize == sizeof HotPlugMemoryEnd) {\r
QemuFwCfgSelectItem (FwCfgItem);\r
QemuFwCfgReadBytes (FwCfgSize, &HotPlugMemoryEnd);\r
+ DEBUG ((DEBUG_VERBOSE, "%a: HotPlugMemoryEnd=0x%Lx\n", __FUNCTION__,\r
+ HotPlugMemoryEnd));\r
\r
ASSERT (HotPlugMemoryEnd >= FirstNonAddress);\r
FirstNonAddress = HotPlugMemoryEnd;\r
// the GCD memory space map through our PciHostBridgeLib instance; here we\r
// only need to set the PCDs.\r
//\r
- PcdSet64 (PcdPciMmio64Base, Pci64Base);\r
- PcdSet64 (PcdPciMmio64Size, Pci64Size);\r
+ PcdStatus = PcdSet64S (PcdPciMmio64Base, Pci64Base);\r
+ ASSERT_RETURN_ERROR (PcdStatus);\r
+ PcdStatus = PcdSet64S (PcdPciMmio64Size, Pci64Size);\r
+ ASSERT_RETURN_ERROR (PcdStatus);\r
+\r
DEBUG ((EFI_D_INFO, "%a: Pci64Base=0x%Lx Pci64Size=0x%Lx\n",\r
__FUNCTION__, Pci64Base, Pci64Size));\r
}\r
EFI_STATUS Status;\r
EFI_PHYSICAL_ADDRESS MemoryBase;\r
UINT64 MemorySize;\r
- UINT64 LowerMemorySize;\r
+ UINT32 LowerMemorySize;\r
UINT32 PeiMemoryCap;\r
\r
LowerMemorySize = GetSystemMemorySizeBelow4gb ();\r
//\r
// TSEG is chipped from the end of low RAM\r
//\r
- LowerMemorySize -= FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ LowerMemorySize -= mQ35TsegMbytes * SIZE_1MB;\r
}\r
\r
//\r
//\r
if (mS3Supported) {\r
mS3AcpiReservedMemorySize = SIZE_512KB +\r
- PcdGet32 (PcdCpuMaxLogicalProcessorNumber) *\r
+ mMaxCpuCount *\r
PcdGet32 (PcdCpuApStackSize);\r
mS3AcpiReservedMemoryBase = LowerMemorySize - mS3AcpiReservedMemorySize;\r
LowerMemorySize = mS3AcpiReservedMemoryBase;\r
// PEI RAM, in a backup buffer allocated with the normal PEI services.\r
// CpuMpPei restores the original contents ("returns" the borrowed area) at\r
// End-of-PEI. End-of-PEI in turn is emitted by S3Resume2Pei before\r
- // transfering control to the OS's wakeup vector in the FACS.\r
+ // transferring control to the OS's wakeup vector in the FACS.\r
//\r
// We expect any other PEIMs that "borrow" memory similarly to CpuMpPei to\r
// restore the original contents. Furthermore, we expect all such PEIMs\r
if (FeaturePcdGet (PcdSmmSmramRequire)) {\r
UINT32 TsegSize;\r
\r
- TsegSize = FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ TsegSize = mQ35TsegMbytes * SIZE_1MB;\r
AddMemoryRangeHob (BASE_1MB, LowerMemorySize - TsegSize);\r
AddReservedMemoryBaseSizeHob (LowerMemorySize - TsegSize, TsegSize,\r
TRUE);\r
AddMemoryRangeHob (BASE_1MB, LowerMemorySize);\r
}\r
\r
- if (UpperMemorySize != 0) {\r
+ //\r
+ // If QEMU presents an E820 map, then create memory HOBs for the >=4GB RAM\r
+ // entries. Otherwise, create a single memory HOB with the flat >=4GB\r
+ // memory size read from the CMOS.\r
+ //\r
+ Status = ScanOrAdd64BitE820Ram (NULL);\r
+ if (EFI_ERROR (Status) && UpperMemorySize != 0) {\r
AddMemoryBaseSizeHob (BASE_4GB, UpperMemorySize);\r
}\r
}\r
// Make sure the TSEG area that we reported as a reserved memory resource\r
// cannot be used for reserved memory allocations.\r
//\r
- TsegSize = FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ TsegSize = mQ35TsegMbytes * SIZE_1MB;\r
BuildMemoryAllocationHob (\r
GetSystemMemorySizeBelow4gb() - TsegSize,\r
TsegSize,\r