*
* Home page of code is: http://smartmontools.sourceforge.net
*
- * Copyright (C) 2002-6 Bruce Allen <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2008-14 Christian Franke <smartmontools-support@lists.sourceforge.net>
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
*
* any later version.
*
* You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
*
* This code was originally developed as a Senior Thesis by Michael Cornwell
* at the Concurrent Systems Laboratory (now part of the Storage Systems
#include "config.h"
#include "int64.h"
#include "atacmds.h"
-#include "scsiata.h"
-#include "extern.h"
#include "utility.h"
+#include "dev_ata_cmd_set.h" // for parsed_ata_device
-const char *atacmds_c_cvsid="$Id: atacmds.cpp,v 1.176 2006/08/25 06:06:24 sxzzsf Exp $"
-ATACMDS_H_CVSID CONFIG_H_CVSID EXTERN_H_CVSID INT64_H_CVSID SCSIATA_H_CVSID UTILITY_H_CVSID;
-
-// to hold onto exit code for atexit routine
-extern int exitstatus;
-
-// for passing global control variables
-extern smartmonctrl *con;
-
-// These Drive Identity tables are taken from hdparm 5.2, and are also
-// given in the ATA/ATAPI specs for the IDENTIFY DEVICE command. Note
-// that SMART was first added into the ATA/ATAPI-3 Standard with
-// Revision 3 of the document, July 25, 1995. Look at the "Document
-// Status" revision commands at the beginning of
-// http://www.t13.org/project/d2008r6.pdf to see this.
-#define NOVAL_0 0x0000
-#define NOVAL_1 0xffff
-/* word 81: minor version number */
-#define MINOR_MAX 0x22
-const char *minor_str[] = { /* word 81 value: */
- "Device does not report version", /* 0x0000 */
- "ATA-1 X3T9.2 781D prior to revision 4", /* 0x0001 */
- "ATA-1 published, ANSI X3.221-1994", /* 0x0002 */
- "ATA-1 X3T9.2 781D revision 4", /* 0x0003 */
- "ATA-2 published, ANSI X3.279-1996", /* 0x0004 */
- "ATA-2 X3T10 948D prior to revision 2k", /* 0x0005 */
- "ATA-3 X3T10 2008D revision 1", /* 0x0006 */ /* SMART NOT INCLUDED */
- "ATA-2 X3T10 948D revision 2k", /* 0x0007 */
- "ATA-3 X3T10 2008D revision 0", /* 0x0008 */
- "ATA-2 X3T10 948D revision 3", /* 0x0009 */
- "ATA-3 published, ANSI X3.298-199x", /* 0x000a */
- "ATA-3 X3T10 2008D revision 6", /* 0x000b */ /* 1st VERSION WITH SMART */
- "ATA-3 X3T13 2008D revision 7 and 7a", /* 0x000c */
- "ATA/ATAPI-4 X3T13 1153D revision 6", /* 0x000d */
- "ATA/ATAPI-4 T13 1153D revision 13", /* 0x000e */
- "ATA/ATAPI-4 X3T13 1153D revision 7", /* 0x000f */
- "ATA/ATAPI-4 T13 1153D revision 18", /* 0x0010 */
- "ATA/ATAPI-4 T13 1153D revision 15", /* 0x0011 */
- "ATA/ATAPI-4 published, ANSI NCITS 317-1998", /* 0x0012 */
- "ATA/ATAPI-5 T13 1321D revision 3", /* 0x0013 */
- "ATA/ATAPI-4 T13 1153D revision 14", /* 0x0014 */
- "ATA/ATAPI-5 T13 1321D revision 1", /* 0x0015 */
- "ATA/ATAPI-5 published, ANSI NCITS 340-2000", /* 0x0016 */
- "ATA/ATAPI-4 T13 1153D revision 17", /* 0x0017 */
- "ATA/ATAPI-6 T13 1410D revision 0", /* 0x0018 */
- "ATA/ATAPI-6 T13 1410D revision 3a", /* 0x0019 */
- "ATA/ATAPI-7 T13 1532D revision 1", /* 0x001a */
- "ATA/ATAPI-6 T13 1410D revision 2", /* 0x001b */
- "ATA/ATAPI-6 T13 1410D revision 1", /* 0x001c */
- "ATA/ATAPI-7 published, ANSI INCITS 397-2005",/* 0x001d */
- "ATA/ATAPI-7 T13 1532D revision 0", /* 0x001e */
- "reserved", /* 0x001f */
- "reserved", /* 0x0020 */
- "ATA/ATAPI-7 T13 1532D revision 4a", /* 0x0021 */
- "ATA/ATAPI-6 published, ANSI INCITS 361-2002" /* 0x0022 */
-};
+const char * atacmds_cpp_cvsid = "$Id: atacmds.cpp 3971 2014-07-23 18:57:55Z chrfranke $"
+ ATACMDS_H_CVSID;
-// NOTE ATA/ATAPI-4 REV 4 was the LAST revision where the device
-// attribute structures were NOT completely vendor specific. So any
-// disk that is ATA/ATAPI-4 or above can not be trusted to show the
-// vendor values in sensible format.
-
-// Negative values below are because it doesn't support SMART
-const int actual_ver[] = {
- /* word 81 value: */
- 0, /* 0x0000 WARNING: */
- 1, /* 0x0001 WARNING: */
- 1, /* 0x0002 WARNING: */
- 1, /* 0x0003 WARNING: */
- 2, /* 0x0004 WARNING: This array */
- 2, /* 0x0005 WARNING: corresponds */
- -3, /*<== */ /* 0x0006 WARNING: *exactly* */
- 2, /* 0x0007 WARNING: to the ATA/ */
- -3, /*<== */ /* 0x0008 WARNING: ATAPI version */
- 2, /* 0x0009 WARNING: listed in */
- 3, /* 0x000a WARNING: the */
- 3, /* 0x000b WARNING: minor_str */
- 3, /* 0x000c WARNING: array */
- 4, /* 0x000d WARNING: above. */
- 4, /* 0x000e WARNING: */
- 4, /* 0x000f WARNING: If you change */
- 4, /* 0x0010 WARNING: that one, */
- 4, /* 0x0011 WARNING: change this one */
- 4, /* 0x0012 WARNING: too!!! */
- 5, /* 0x0013 WARNING: */
- 4, /* 0x0014 WARNING: */
- 5, /* 0x0015 WARNING: */
- 5, /* 0x0016 WARNING: */
- 4, /* 0x0017 WARNING: */
- 6, /* 0x0018 WARNING: */
- 6, /* 0x0019 WARNING: */
- 7, /* 0x001a WARNING: */
- 6, /* 0x001b WARNING: */
- 6, /* 0x001c WARNING: */
- 7, /* 0x001d WARNING: */
- 7, /* 0x001e WARNING: */
- 0, /* 0x001f WARNING: */
- 0, /* 0x0020 WARNING: */
- 7, /* 0x0021 WARNING: */
- 6 /* 0x0022 WARNING: */
-};
+// Print ATA debug messages?
+unsigned char ata_debugmode = 0;
-// When you add additional items to this list, you should then:
-// 0 -- update this list
-// 1 -- modify the following function parse_attribute_def()
-// 2 -- if needed, modify ataPrintSmartAttribRawValue()
-// 3 - if needed, modify ataPrintSmartAttribName()
-// 4 -- add #define PRESET_N_DESCRIPTION at top of knowndrives.c
-// 5 -- add drive in question into knowndrives[] table in knowndrives.c
-// 6 -- update smartctl.8
-// 7 -- update smartd.8
-// 8 -- do "make smartd.conf.5" to update smartd.conf.5
-// 9 -- update CHANGELOG file
-const char *vendorattributeargs[] = {
- // 0 defs[9]=1
- "9,minutes",
- // 1 defs[9]=3
- "9,seconds",
- // 2 defs[9]=2
- "9,temp",
- // 3 defs[220]=1
- "220,temp",
- // 4 defs[*]=253
- "N,raw8",
- // 5 defs[*]=254
- "N,raw16",
- // 6 defs[*]=255
- "N,raw48",
- // 7 defs[200]=1
- "200,writeerrorcount",
- // 8 defs[9]=4
- "9,halfminutes",
- // 9 defs[194]=1
- "194,10xCelsius",
- // 10 defs[194]=2
- "194,unknown",
- // 11 defs[193]=1
- "193,loadunload",
- // 12 defs[201]=1
- "201,detectedtacount",
- // 13 defs[192]=1
- "192,emergencyretractcyclect",
- // 14 defs[198]=1
- "198,offlinescanuncsectorct",
- // NULL should always terminate the array
- NULL
-};
+// Suppress serial number?
+// (also used in scsiprint.cpp)
+bool dont_print_serial_number = false;
+
+
+#define SMART_CYL_LOW 0x4F
+#define SMART_CYL_HI 0xC2
+
+// SMART RETURN STATUS yields SMART_CYL_HI,SMART_CYL_LOW to indicate drive
+// is healthy and SRET_STATUS_HI_EXCEEDED,SRET_STATUS_MID_EXCEEDED to
+// indicate that a threshhold exceeded condition has been detected.
+// Those values (byte pairs) are placed in ATA register "LBA 23:8".
+#define SRET_STATUS_HI_EXCEEDED 0x2C
+#define SRET_STATUS_MID_EXCEEDED 0xF4
+
+
+// Get ID and increase flag of current pending or offline
+// uncorrectable attribute.
+unsigned char get_unc_attr_id(bool offline, const ata_vendor_attr_defs & defs,
+ bool & increase)
+{
+ unsigned char id = (!offline ? 197 : 198);
+ const ata_vendor_attr_defs::entry & def = defs[id];
+ if (def.flags & ATTRFLAG_INCREASING)
+ increase = true; // '-v 19[78],increasing' option
+ else if (def.name.empty() || (id == 198 && def.name == "Offline_Scan_UNC_SectCt"))
+ increase = false; // no or '-v 198,offlinescanuncsectorct' option
+ else
+ id = 0; // other '-v 19[78],...' option
+ return id;
+}
+#if 0 // TODO: never used
// This are the meanings of the Self-test failure checkpoint byte.
// This is in the self-test log at offset 4 bytes into the self-test
// descriptor and in the SMART READ DATA structure at byte offset
return NULL;
}
}
+#endif
-// This is a utility function for parsing pairs like "9,minutes" or
-// "220,temp", and putting the correct flag into the attributedefs
-// array. Returns 1 if problem, 0 if pair has been recongized.
-int parse_attribute_def(char *pair, unsigned char **defsptr){
- int i,j;
- char temp[32];
- unsigned char *defs;
- // If array does not exist, allocate it
- if (!*defsptr && !(*defsptr=(unsigned char *)calloc(MAX_ATTRIBUTE_NUM, 1))){
- pout("Out of memory in parse_attribute_def\n");
- EXIT(1);
- }
+// Table of raw print format names
+struct format_name_entry
+{
+ const char * name;
+ ata_attr_raw_format format;
+};
- defs=*defsptr;
+const format_name_entry format_names[] = {
+ {"raw8" , RAWFMT_RAW8},
+ {"raw16" , RAWFMT_RAW16},
+ {"raw48" , RAWFMT_RAW48},
+ {"hex48" , RAWFMT_HEX48},
+ {"raw56" , RAWFMT_RAW56},
+ {"hex56" , RAWFMT_HEX56},
+ {"raw64" , RAWFMT_RAW64},
+ {"hex64" , RAWFMT_HEX64},
+ {"raw16(raw16)" , RAWFMT_RAW16_OPT_RAW16},
+ {"raw16(avg16)" , RAWFMT_RAW16_OPT_AVG16},
+ {"raw24(raw8)" , RAWFMT_RAW24_OPT_RAW8},
+ {"raw24/raw24" , RAWFMT_RAW24_DIV_RAW24},
+ {"raw24/raw32" , RAWFMT_RAW24_DIV_RAW32},
+ {"sec2hour" , RAWFMT_SEC2HOUR},
+ {"min2hour" , RAWFMT_MIN2HOUR},
+ {"halfmin2hour" , RAWFMT_HALFMIN2HOUR},
+ {"msec24hour32" , RAWFMT_MSEC24_HOUR32},
+ {"tempminmax" , RAWFMT_TEMPMINMAX},
+ {"temp10x" , RAWFMT_TEMP10X},
+};
- // look along list and see if we find the pair
- for (i=0; vendorattributeargs[i] && strcmp(pair, vendorattributeargs[i]); i++);
+const unsigned num_format_names = sizeof(format_names)/sizeof(format_names[0]);
+
+// Table to map old to new '-v' option arguments
+const char * const map_old_vendor_opts[][2] = {
+ { "9,halfminutes" , "9,halfmin2hour,Power_On_Half_Minutes"},
+ { "9,minutes" , "9,min2hour,Power_On_Minutes"},
+ { "9,seconds" , "9,sec2hour,Power_On_Seconds"},
+ { "9,temp" , "9,tempminmax,Temperature_Celsius"},
+ {"192,emergencyretractcyclect" , "192,raw48,Emerg_Retract_Cycle_Ct"},
+ {"193,loadunload" , "193,raw24/raw24"},
+ {"194,10xCelsius" , "194,temp10x,Temperature_Celsius_x10"},
+ {"194,unknown" , "194,raw48,Unknown_Attribute"},
+ {"197,increasing" , "197,raw48+,Total_Pending_Sectors"}, // '+' sets flag
+ {"198,offlinescanuncsectorct" , "198,raw48,Offline_Scan_UNC_SectCt"}, // see also get_unc_attr_id() above
+ {"198,increasing" , "198,raw48+,Total_Offl_Uncorrectabl"}, // '+' sets flag
+ {"200,writeerrorcount" , "200,raw48,Write_Error_Count"},
+ {"201,detectedtacount" , "201,raw48,Detected_TA_Count"},
+ {"220,temp" , "220,tempminmax,Temperature_Celsius"},
+};
- switch (i) {
- case 0:
- // attribute 9 is power on time in minutes
- defs[9]=1;
- return 0;
- case 1:
- // attribute 9 is power-on-time in seconds
- defs[9]=3;
- return 0;
- case 2:
- // attribute 9 is temperature in celsius
- defs[9]=2;
- return 0;
- case 3:
- // attribute 220 is temperature in celsius
- defs[220]=1;
- return 0;
- case 4:
- // print all attributes in raw 8-bit form
- for (j=0; j<MAX_ATTRIBUTE_NUM; j++)
- defs[j]=253;
- return 0;
- case 5:
- // print all attributes in raw 16-bit form
- for (j=0; j<MAX_ATTRIBUTE_NUM; j++)
- defs[j]=254;
- return 0;
- case 6:
- // print all attributes in raw 48-bit form
- for (j=0; j<MAX_ATTRIBUTE_NUM; j++)
- defs[j]=255;
- return 0;
- case 7:
- // attribute 200 is write error count
- defs[200]=1;
- return 0;
- case 8:
- // attribute 9 increments once every 30 seconds (power on time
- // measure)
- defs[9]=4;
- return 0;
- case 9:
- // attribute 194 is ten times disk temp in Celsius
- defs[194]=1;
- return 0;
- case 10:
- // attribute 194 is unknown
- defs[194]=2;
- return 0;
- case 11:
- // Hitachi : Attributes 193 has 2 values : 1 load, 1 normal unload
- defs[193]=1;
- return 0;
- case 12:
- // Fujitsu
- defs[201]=1;
- return 0;
- case 13:
- // Fujitsu
- defs[192]=1;
- return 0;
- case 14:
- // Fujitsu
- defs[198]=1;
- return 0;
- default:
- // pair not found
- break;
+const unsigned num_old_vendor_opts = sizeof(map_old_vendor_opts)/sizeof(map_old_vendor_opts[0]);
+
+// Parse vendor attribute display def (-v option).
+// Return false on error.
+bool parse_attribute_def(const char * opt, ata_vendor_attr_defs & defs,
+ ata_vendor_def_prior priority)
+{
+ // Map old -> new options
+ unsigned i;
+ for (i = 0; i < num_old_vendor_opts; i++) {
+ if (!strcmp(opt, map_old_vendor_opts[i][0])) {
+ opt = map_old_vendor_opts[i][1];
+ break;
+ }
}
- // At this point, either the pair was not found, or it is of the
- // form N,uninterpreted, in which case we need to parse N
- j=sscanf(pair,"%d,%14s", &i, temp);
-
- // if no match to pattern, unrecognized
- if (j!=2 || i<0 || i >255)
- return 1;
- // check for recognized strings
- if (!strcmp(temp, "raw8")) {
- defs[i]=253;
- return 0;
+ // Parse option
+ int len = strlen(opt);
+ int id = 0, n1 = -1, n2 = -1;
+ char fmtname[32+1], attrname[32+1];
+ if (opt[0] == 'N') {
+ // "N,format[,name]"
+ if (!( sscanf(opt, "N,%32[^,]%n,%32[^,]%n", fmtname, &n1, attrname, &n2) >= 1
+ && (n1 == len || n2 == len)))
+ return false;
}
-
- // check for recognized strings
- if (!strcmp(temp, "raw16")) {
- defs[i]=254;
- return 0;
+ else {
+ // "id,format[+][,name]"
+ if (!( sscanf(opt, "%d,%32[^,]%n,%32[^,]%n", &id, fmtname, &n1, attrname, &n2) >= 2
+ && 1 <= id && id <= 255 && (n1 == len || n2 == len)))
+ return false;
}
-
- // check for recognized strings
- if (!strcmp(temp, "raw48")) {
- defs[i]=255;
- return 0;
+ if (n1 == len)
+ attrname[0] = 0;
+
+ unsigned flags = 0;
+ // For "-v 19[78],increasing" above
+ if (fmtname[strlen(fmtname)-1] == '+') {
+ fmtname[strlen(fmtname)-1] = 0;
+ flags = ATTRFLAG_INCREASING;
}
-
- // didn't recognize the string
- return 1;
-}
-
-// Structure used in sorting the array vendorattributeargs[].
-typedef struct vaa_pair_s {
- const char *vaa;
- const char *padded_vaa;
-} vaa_pair;
-// Returns a copy of s with all numbers of less than three digits padded with
-// leading zeros. Returns NULL if there isn't enough memory available. The
-// memory for the string is dynamically allocated and should be freed by the
-// caller.
-char *pad_numbers(const char *s)
-{
- char c, *t, *u;
- const char *r;
- int i, len, ndigits = 0;
-
- // Allocate the maximum possible amount of memory needed.
- if (!(t = (char *)malloc(strlen(s)*2+2)))
- return NULL;
+ // Split "format[:byteorder]"
+ char byteorder[8+1] = "";
+ if (strchr(fmtname, ':')) {
+ n1 = n2 = -1;
+ if (!( sscanf(fmtname, "%*[^:]%n:%8[012345rvwz]%n", &n1, byteorder, &n2) >= 1
+ && n2 == (int)strlen(fmtname)))
+ return false;
+ fmtname[n1] = 0;
+ if (strchr(byteorder, 'v'))
+ flags |= (ATTRFLAG_NO_NORMVAL|ATTRFLAG_NO_WORSTVAL);
+ if (strchr(byteorder, 'w'))
+ flags |= ATTRFLAG_NO_WORSTVAL;
+ }
- // Copy the string s to t, padding any numbers of less than three digits
- // with leading zeros. The string is copied backwards to simplify the code.
- r = s + strlen(s);
- u = t;
- while (( r-- >= s)) {
- if (isdigit((int)*r))
- ndigits++;
- else if (ndigits > 0) {
- while (ndigits++ < 3)
- *u++ = '0';
- ndigits = 0;
+ // Find format name
+ for (i = 0; ; i++) {
+ if (i >= num_format_names)
+ return false; // Not found
+ if (!strcmp(fmtname, format_names[i].name))
+ break;
+ }
+ ata_attr_raw_format format = format_names[i].format;
+
+ // 64-bit formats use the normalized and worst value bytes.
+ if (!*byteorder && (format == RAWFMT_RAW64 || format == RAWFMT_HEX64))
+ flags |= (ATTRFLAG_NO_NORMVAL|ATTRFLAG_NO_WORSTVAL);
+
+ if (!id) {
+ // "N,format" -> set format for all entries
+ for (i = 0; i < MAX_ATTRIBUTE_NUM; i++) {
+ if (defs[i].priority >= priority)
+ continue;
+ if (attrname[0])
+ defs[i].name = attrname;
+ defs[i].priority = priority;
+ defs[i].raw_format = format;
+ defs[i].flags = flags;
+ snprintf(defs[i].byteorder, sizeof(defs[i].byteorder), "%s", byteorder);
}
- *u++ = *r;
}
- *u = '\0';
-
- // Reverse the string in t.
- len = strlen(t);
- for (i = 0; i < len/2; i++) {
- c = t[i];
- t[i] = t[len-1-i];
- t[len-1-i] = c;
+ else if (defs[id].priority <= priority) {
+ // "id,format[,name]"
+ if (attrname[0])
+ defs[id].name = attrname;
+ defs[id].raw_format = format;
+ defs[id].priority = priority;
+ defs[id].flags = flags;
+ snprintf(defs[id].byteorder, sizeof(defs[id].byteorder), "%s", byteorder);
}
- return t;
+ return true;
}
-// Comparison function for qsort(). Used by sort_vendorattributeargs().
-int compare_vaa_pairs(const void *a, const void *b)
-{
- vaa_pair *p = (vaa_pair *)a;
- vaa_pair *q = (vaa_pair *)b;
- return strcmp(p->padded_vaa, q->padded_vaa);
+// Return a multiline string containing a list of valid arguments for
+// parse_attribute_def(). The strings are preceeded by tabs and followed
+// (except for the last) by newlines.
+std::string create_vendor_attribute_arg_list()
+{
+ std::string s;
+ unsigned i;
+ for (i = 0; i < num_format_names; i++)
+ s += strprintf("%s\tN,%s[:012345rvwz][,ATTR_NAME]",
+ (i>0 ? "\n" : ""), format_names[i].name);
+ for (i = 0; i < num_old_vendor_opts; i++)
+ s += strprintf("\n\t%s", map_old_vendor_opts[i][0]);
+ return s;
}
-// Returns a sorted list of vendorattributeargs or NULL if there is not enough
-// memory available. The memory for the list is allocated dynamically and
-// should be freed by the caller.
-// To perform the sort, any numbers in the strings are padded out to three
-// digits by adding leading zeros. For example,
-//
-// "9,minutes" becomes "009,minutes"
-// "N,raw16" becomes "N,raw016"
-//
-// and the original strings are paired with the padded strings. The list of
-// pairs is then sorted by comparing the padded strings (using strcmp) and the
-// result is then the list of unpadded strings.
-//
-const char **sort_vendorattributeargs(void) {
- const char **ps, **sorted_list = NULL;
- vaa_pair *pairs, *pp;
- int count, i;
-
- // Figure out how many strings are in vendorattributeargs[] (not including
- // the terminating NULL).
- count = (sizeof vendorattributeargs) / sizeof(char *) - 1;
-
- // Construct a list of pairs of strings from vendorattributeargs[] and their
- // padded equivalents.
- if (!(pairs = (vaa_pair *)malloc(sizeof(vaa_pair) * count)))
- goto END;
- for (ps = vendorattributeargs, pp = pairs; *ps; ps++, pp++) {
- pp->vaa = *ps;
- if (!(pp->padded_vaa = pad_numbers(*ps)))
- goto END;
- }
-
- // Sort the array of vaa_pair structures by comparing the padded strings
- // using strcmp().
- qsort(pairs, count, sizeof(vaa_pair), compare_vaa_pairs);
-
- // Construct the sorted list of strings.
- if (!(sorted_list = (const char **)malloc(sizeof vendorattributeargs)))
- goto END;
- for (ps = sorted_list, pp = pairs, i = 0; i < count; ps++, pp++, i++)
- *ps = pp->vaa;
- *ps = NULL;
-END:
- if (pairs) {
- for (i = 0; i < count; i++)
- if (pairs[i].padded_vaa)
- free((void *)pairs[i].padded_vaa);
- free((void *)pairs);
- }
-
- // If there was a problem creating the list then sorted_list should now
- // contain NULL.
- return sorted_list;
+// Parse firmwarebug def (-F option).
+// Return false on error.
+bool parse_firmwarebug_def(const char * opt, firmwarebug_defs & firmwarebugs)
+{
+ if (!strcmp(opt, "none"))
+ firmwarebugs.set(BUG_NONE);
+ else if (!strcmp(opt, "nologdir"))
+ firmwarebugs.set(BUG_NOLOGDIR);
+ else if (!strcmp(opt, "samsung"))
+ firmwarebugs.set(BUG_SAMSUNG);
+ else if (!strcmp(opt, "samsung2"))
+ firmwarebugs.set(BUG_SAMSUNG2);
+ else if (!strcmp(opt, "samsung3"))
+ firmwarebugs.set(BUG_SAMSUNG3);
+ else if (!strcmp(opt, "xerrorlba"))
+ firmwarebugs.set(BUG_XERRORLBA);
+ else
+ return false;
+ return true;
}
-// Function to return a multiline string containing a list of the arguments in
-// vendorattributeargs[]. The strings are preceeded by tabs and followed
-// (except for the last) by newlines.
-// This function allocates the required memory for the string and the caller
-// must use free() to free it. It returns NULL if the required memory can't
-// be allocated.
-char *create_vendor_attribute_arg_list(void){
- const char **ps, **sorted;
- char *s;
- int len;
-
- // Get a sorted list of vendor attribute arguments. If the sort fails
- // (which should only happen if the system is really low on memory) then just
- // use the unordered list.
- if (!(sorted = (const char **) sort_vendorattributeargs()))
- sorted = vendorattributeargs;
-
- // Calculate the required number of characters
- len = 1; // At least one char ('\0')
- for (ps = sorted; *ps != NULL; ps++) {
- len += 1; // For the tab
- len += strlen(*ps); // For the actual argument string
- if (*(ps+1))
- len++; // For the newline if required
- }
-
- // Attempt to allocate memory for the string
- if (!(s = (char *)malloc(len)))
- return NULL;
-
- // Construct the string
- *s = '\0';
- for (ps = sorted; *ps != NULL; ps++) {
- strcat(s, "\t");
- strcat(s, *ps);
- if (*(ps+1))
- strcat(s, "\n");
- }
-
- free((char **)sorted);
-
- // Return a pointer to the string
- return s;
+// Return a string of valid argument words for parse_firmwarebug_def()
+const char * get_valid_firmwarebug_args()
+{
+ return "none, nologdir, samsung, samsung2, samsung3, xerrorlba";
}
+
// swap two bytes. Point to low address
void swap2(char *location){
char tmp=*location;
return;
}
-static char *commandstrings[]={
+// Invalidate serial number and WWN and adjust checksum in IDENTIFY data
+static void invalidate_serno(ata_identify_device * id)
+{
+ unsigned char sum = 0;
+ unsigned i;
+ for (i = 0; i < sizeof(id->serial_no); i++) {
+ sum += id->serial_no[i]; sum -= id->serial_no[i] = 'X';
+ }
+ unsigned char * b = (unsigned char *)id;
+ for (i = 2*108; i < 2*112; i++) { // words108-111: WWN
+ sum += b[i]; sum -= b[i] = 0x00;
+ }
+
+#ifndef __NetBSD__
+ bool must_swap = !!isbigendian();
+ if (must_swap)
+ swapx(id->words088_255+255-88);
+#endif
+ if ((id->words088_255[255-88] & 0x00ff) == 0x00a5)
+ id->words088_255[255-88] += sum << 8;
+#ifndef __NetBSD__
+ if (must_swap)
+ swapx(id->words088_255+255-88);
+#endif
+}
+
+static const char * const commandstrings[]={
"SMART ENABLE",
"SMART DISABLE",
"SMART AUTOMATIC ATTRIBUTE SAVE",
"WARNING (UNDEFINED COMMAND -- CONTACT DEVELOPERS AT " PACKAGE_BUGREPORT ")\n"
};
-void prettyprint(unsigned char *stuff, char *name){
- int i,j;
+
+static const char * preg(const ata_register & r, char (& buf)[8])
+{
+ if (!r.is_set())
+ //return "n/a ";
+ return "....";
+ snprintf(buf, sizeof(buf), "0x%02x", r.val());
+ return buf;
+}
+
+static void print_regs(const char * prefix, const ata_in_regs & r, const char * suffix = "\n")
+{
+ char bufs[7][8];
+ pout("%s FR=%s, SC=%s, LL=%s, LM=%s, LH=%s, DEV=%s, CMD=%s%s", prefix,
+ preg(r.features, bufs[0]), preg(r.sector_count, bufs[1]), preg(r.lba_low, bufs[2]),
+ preg(r.lba_mid, bufs[3]), preg(r.lba_high, bufs[4]), preg(r.device, bufs[5]),
+ preg(r.command, bufs[6]), suffix);
+}
+
+static void print_regs(const char * prefix, const ata_out_regs & r, const char * suffix = "\n")
+{
+ char bufs[7][8];
+ pout("%sERR=%s, SC=%s, LL=%s, LM=%s, LH=%s, DEV=%s, STS=%s%s", prefix,
+ preg(r.error, bufs[0]), preg(r.sector_count, bufs[1]), preg(r.lba_low, bufs[2]),
+ preg(r.lba_mid, bufs[3]), preg(r.lba_high, bufs[4]), preg(r.device, bufs[5]),
+ preg(r.status, bufs[6]), suffix);
+}
+
+static void prettyprint(const unsigned char *p, const char *name){
pout("\n===== [%s] DATA START (BASE-16) =====\n", name);
- for (i=0; i<32; i++){
- pout("%03d-%03d: ", 16*i, 16*(i+1)-1);
- for (j=0; j<15; j++)
- pout("%02x ",*stuff++);
- pout("%02x\n",*stuff++);
- }
+ for (int i=0; i<512; i+=16, p+=16)
+#define P(n) (' ' <= p[n] && p[n] <= '~' ? (int)p[n] : '.')
+ // print complete line to avoid slow tty output and extra lines in syslog.
+ pout("%03d-%03d: %02x %02x %02x %02x %02x %02x %02x %02x "
+ "%02x %02x %02x %02x %02x %02x %02x %02x"
+ " |%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c|"
+ "%c",
+ i, i+16-1,
+ p[ 0], p[ 1], p[ 2], p[ 3], p[ 4], p[ 5], p[ 6], p[ 7],
+ p[ 8], p[ 9], p[10], p[11], p[12], p[13], p[14], p[15],
+ P( 0), P( 1), P( 2), P( 3), P( 4), P( 5), P( 6), P( 7),
+ P( 8), P( 9), P(10), P(11), P(12), P(13), P(14), P(15),
+ '\n');
+#undef P
pout("===== [%s] DATA END (512 Bytes) =====\n\n", name);
}
// This function provides the pretty-print reporting for SMART
// commands: it implements the various -r "reporting" options for ATA
// ioctls.
-int smartcommandhandler(int device, smart_command_set command, int select, char *data){
- int retval;
-
+int smartcommandhandler(ata_device * device, smart_command_set command, int select, char *data){
+ // TODO: Rework old stuff below
// This conditional is true for commands that return data
int getsdata=(command==PIDENTIFY ||
command==IDENTIFY ||
int sendsdata=(command==WRITE_LOG);
// If reporting is enabled, say what the command will be before it's executed
- if (con->reportataioctl){
+ if (ata_debugmode) {
// conditional is true for commands that use parameters
int usesparam=(command==READ_LOG ||
command==AUTO_OFFLINE ||
command==IMMEDIATE_OFFLINE ||
command==WRITE_LOG);
- pout("\nREPORT-IOCTL: DeviceFD=%d Command=%s", device, commandstrings[command]);
+ pout("\nREPORT-IOCTL: Device=%s Command=%s", device->get_dev_name(), commandstrings[command]);
if (usesparam)
pout(" InputParameter=%d\n", select);
else
}
- // If reporting is enabled, say what input was sent to the command
- if (con->reportataioctl && sendsdata){
- pout("REPORT-IOCTL: DeviceFD=%d Command=%s", device, commandstrings[command]);
- // if requested, pretty-print the output data structure
- if (con->reportataioctl>1)
- prettyprint((unsigned char *)data, commandstrings[command]);
- }
+ // if requested, pretty-print the input data structure
+ if (ata_debugmode > 1 && sendsdata)
+ //pout("REPORT-IOCTL: Device=%s Command=%s\n", device->get_dev_name(), commandstrings[command]);
+ prettyprint((unsigned char *)data, commandstrings[command]);
- // In case the command produces an error, we'll want to know what it is:
- errno=0;
-
// now execute the command
- switch (con->controller_type) {
- case CONTROLLER_3WARE_678K:
- case CONTROLLER_3WARE_678K_CHAR:
- case CONTROLLER_3WARE_9000_CHAR:
- retval=escalade_command_interface(device, con->controller_port-1, con->controller_type, command, select, data);
- if (retval && con->controller_port<=0)
- pout("WARNING: apparently missing '-d 3ware,N' disk specification\n");
- break;
- case CONTROLLER_MARVELL_SATA:
- retval=marvell_command_interface(device, command, select, data);
- break;
- case CONTROLLER_SAT:
- retval=sat_command_interface(device, command, select, data);
- break;
- case CONTROLLER_HPT:
- retval=highpoint_command_interface(device, command, select, data);
- break;
- default:
- retval=ata_command_interface(device, command, select, data);
+ int retval = -1;
+ {
+ ata_cmd_in in;
+ // Set common register values
+ switch (command) {
+ default: // SMART commands
+ in.in_regs.command = ATA_SMART_CMD;
+ in.in_regs.lba_high = SMART_CYL_HI; in.in_regs.lba_mid = SMART_CYL_LOW;
+ break;
+ case IDENTIFY: case PIDENTIFY: case CHECK_POWER_MODE: // Non SMART commands
+ break;
+ }
+ // Set specific values
+ switch (command) {
+ case IDENTIFY:
+ in.in_regs.command = ATA_IDENTIFY_DEVICE;
+ in.set_data_in(data, 1);
+ break;
+ case PIDENTIFY:
+ in.in_regs.command = ATA_IDENTIFY_PACKET_DEVICE;
+ in.set_data_in(data, 1);
+ break;
+ case CHECK_POWER_MODE:
+ in.in_regs.command = ATA_CHECK_POWER_MODE;
+ in.out_needed.sector_count = true; // Powermode returned here
+ break;
+ case READ_VALUES:
+ in.in_regs.features = ATA_SMART_READ_VALUES;
+ in.set_data_in(data, 1);
+ break;
+ case READ_THRESHOLDS:
+ in.in_regs.features = ATA_SMART_READ_THRESHOLDS;
+ in.in_regs.lba_low = 1; // TODO: CORRECT ???
+ in.set_data_in(data, 1);
+ break;
+ case READ_LOG:
+ in.in_regs.features = ATA_SMART_READ_LOG_SECTOR;
+ in.in_regs.lba_low = select;
+ in.set_data_in(data, 1);
+ break;
+ case WRITE_LOG:
+ in.in_regs.features = ATA_SMART_WRITE_LOG_SECTOR;
+ in.in_regs.lba_low = select;
+ in.set_data_out(data, 1);
+ break;
+ case ENABLE:
+ in.in_regs.features = ATA_SMART_ENABLE;
+ in.in_regs.lba_low = 1; // TODO: CORRECT ???
+ break;
+ case DISABLE:
+ in.in_regs.features = ATA_SMART_DISABLE;
+ in.in_regs.lba_low = 1; // TODO: CORRECT ???
+ break;
+ case STATUS_CHECK:
+ in.out_needed.lba_high = in.out_needed.lba_mid = true; // Status returned here
+ case STATUS:
+ in.in_regs.features = ATA_SMART_STATUS;
+ break;
+ case AUTO_OFFLINE:
+ in.in_regs.features = ATA_SMART_AUTO_OFFLINE;
+ in.in_regs.sector_count = select; // Caution: Non-DATA command!
+ break;
+ case AUTOSAVE:
+ in.in_regs.features = ATA_SMART_AUTOSAVE;
+ in.in_regs.sector_count = select; // Caution: Non-DATA command!
+ break;
+ case IMMEDIATE_OFFLINE:
+ in.in_regs.features = ATA_SMART_IMMEDIATE_OFFLINE;
+ in.in_regs.lba_low = select;
+ break;
+ default:
+ pout("Unrecognized command %d in smartcommandhandler()\n"
+ "Please contact " PACKAGE_BUGREPORT "\n", command);
+ device->set_err(ENOSYS);
+ return -1;
+ }
+
+ if (ata_debugmode)
+ print_regs(" Input: ", in.in_regs,
+ (in.direction==ata_cmd_in::data_in ? " IN\n":
+ in.direction==ata_cmd_in::data_out ? " OUT\n":"\n"));
+
+ ata_cmd_out out;
+
+ int64_t start_usec = -1;
+ if (ata_debugmode)
+ start_usec = smi()->get_timer_usec();
+
+ bool ok = device->ata_pass_through(in, out);
+
+ if (start_usec >= 0) {
+ int64_t duration_usec = smi()->get_timer_usec() - start_usec;
+ if (duration_usec >= 500)
+ pout(" [Duration: %.3fs]\n", duration_usec / 1000000.0);
+ }
+
+ if (ata_debugmode && out.out_regs.is_set())
+ print_regs(" Output: ", out.out_regs);
+
+ if (ok) switch (command) {
+ default:
+ retval = 0;
+ break;
+ case CHECK_POWER_MODE:
+ if (out.out_regs.sector_count.is_set()) {
+ data[0] = out.out_regs.sector_count;
+ retval = 0;
+ }
+ else {
+ pout("CHECK POWER MODE: incomplete response, ATA output registers missing\n");
+ device->set_err(ENOSYS);
+ retval = -1;
+ }
+ break;
+ case STATUS_CHECK:
+ // Cyl low and Cyl high unchanged means "Good SMART status"
+ if ((out.out_regs.lba_high == SMART_CYL_HI) &&
+ (out.out_regs.lba_mid == SMART_CYL_LOW))
+ retval = 0;
+ // These values mean "Bad SMART status"
+ else if ((out.out_regs.lba_high == SRET_STATUS_HI_EXCEEDED) &&
+ (out.out_regs.lba_mid == SRET_STATUS_MID_EXCEEDED))
+ retval = 1;
+ else if (out.out_regs.lba_mid == SMART_CYL_LOW) {
+ retval = 0;
+ if (ata_debugmode)
+ pout("SMART STATUS RETURN: half healthy response sequence, "
+ "probable SAT/USB truncation\n");
+ } else if (out.out_regs.lba_mid == SRET_STATUS_MID_EXCEEDED) {
+ retval = 1;
+ if (ata_debugmode)
+ pout("SMART STATUS RETURN: half unhealthy response sequence, "
+ "probable SAT/USB truncation\n");
+ }
+ else if (!out.out_regs.is_set()) {
+ device->set_err(ENOSYS, "Incomplete response, ATA output registers missing");
+ retval = -1;
+ }
+ else {
+ // We haven't gotten output that makes sense; print out some debugging info
+ pout("SMART Status command failed\n");
+ pout("Please get assistance from %s\n", PACKAGE_HOMEPAGE);
+ pout("Register values returned from SMART Status command are:\n");
+ print_regs(" ", out.out_regs);
+ device->set_err(ENOSYS, "Invalid ATA output register values");
+ retval = -1;
+ }
+ break;
+ }
}
+ // If requested, invalidate serial number before any printing is done
+ if ((command == IDENTIFY || command == PIDENTIFY) && !retval && dont_print_serial_number)
+ invalidate_serno((ata_identify_device *)data);
+
// If reporting is enabled, say what output was produced by the command
- if (con->reportataioctl){
- if (errno)
- pout("REPORT-IOCTL: DeviceFD=%d Command=%s returned %d errno=%d [%s]\n",
- device, commandstrings[command], retval, errno, strerror(errno));
+ if (ata_debugmode) {
+ if (device->get_errno())
+ pout("REPORT-IOCTL: Device=%s Command=%s returned %d errno=%d [%s]\n",
+ device->get_dev_name(), commandstrings[command], retval,
+ device->get_errno(), device->get_errmsg());
else
- pout("REPORT-IOCTL: DeviceFD=%d Command=%s returned %d\n",
- device, commandstrings[command], retval);
+ pout("REPORT-IOCTL: Device=%s Command=%s returned %d\n",
+ device->get_dev_name(), commandstrings[command], retval);
// if requested, pretty-print the output data structure
- if (con->reportataioctl>1 && getsdata) {
+ if (ata_debugmode > 1 && getsdata) {
if (command==CHECK_POWER_MODE)
pout("Sector Count Register (BASE-16): %02x\n", (unsigned char)(*data));
else
prettyprint((unsigned char *)data, commandstrings[command]);
}
}
+
return retval;
}
+// Get capacity and sector sizes from IDENTIFY data
+void ata_get_size_info(const ata_identify_device * id, ata_size_info & sizes)
+{
+ sizes.sectors = sizes.capacity = 0;
+ sizes.log_sector_size = sizes.phy_sector_size = 0;
+ sizes.log_sector_offset = 0;
+
+ // Return if no LBA support
+ if (!(id->words047_079[49-47] & 0x0200))
+ return;
+
+ // Determine 28-bit LBA capacity
+ unsigned lba28 = (unsigned)id->words047_079[61-47] << 16
+ | (unsigned)id->words047_079[60-47] ;
+
+ // Determine 48-bit LBA capacity if supported
+ uint64_t lba48 = 0;
+ if ((id->command_set_2 & 0xc400) == 0x4400)
+ lba48 = (uint64_t)id->words088_255[103-88] << 48
+ | (uint64_t)id->words088_255[102-88] << 32
+ | (uint64_t)id->words088_255[101-88] << 16
+ | (uint64_t)id->words088_255[100-88] ;
+
+ // Return if capacity unknown (ATAPI CD/DVD)
+ if (!(lba28 || lba48))
+ return;
+
+ // Determine sector sizes
+ sizes.log_sector_size = sizes.phy_sector_size = 512;
+
+ unsigned short word106 = id->words088_255[106-88];
+ if ((word106 & 0xc000) == 0x4000) {
+ // Long Logical/Physical Sectors (LLS/LPS) ?
+ if (word106 & 0x1000)
+ // Logical sector size is specified in 16-bit words
+ sizes.log_sector_size = sizes.phy_sector_size =
+ ((id->words088_255[118-88] << 16) | id->words088_255[117-88]) << 1;
+
+ if (word106 & 0x2000)
+ // Physical sector size is multiple of logical sector size
+ sizes.phy_sector_size <<= (word106 & 0x0f);
+
+ unsigned short word209 = id->words088_255[209-88];
+ if ((word209 & 0xc000) == 0x4000)
+ sizes.log_sector_offset = (word209 & 0x3fff) * sizes.log_sector_size;
+ }
+
+ // Some early 4KiB LLS disks (Samsung N3U-3) return bogus lba28 value
+ if (lba48 >= lba28 || (lba48 && sizes.log_sector_size > 512))
+ sizes.sectors = lba48;
+ else
+ sizes.sectors = lba28;
+
+ sizes.capacity = sizes.sectors * sizes.log_sector_size;
+}
// This function computes the checksum of a single disk sector (512
// bytes). Returns zero if checksum is OK, nonzero if the checksum is
// incorrect. The size (512) is correct for all SMART structures.
-unsigned char checksum(unsigned char *buffer){
- unsigned char sum=0;
+unsigned char checksum(const void * data)
+{
+ unsigned char sum = 0;
+ for (int i = 0; i < 512; i++)
+ sum += ((const unsigned char *)data)[i];
+ return sum;
+}
+
+// Copies n bytes (or n-1 if n is odd) from in to out, but swaps adjacents
+// bytes.
+static void swapbytes(char * out, const char * in, size_t n)
+{
+ for (size_t i = 0; i < n; i += 2) {
+ out[i] = in[i+1];
+ out[i+1] = in[i];
+ }
+}
+
+// Copies in to out, but removes leading and trailing whitespace.
+static void trim(char * out, const char * in)
+{
+ // Find the first non-space character (maybe none).
+ int first = -1;
int i;
-
- for (i=0; i<512; i++)
- sum+=buffer[i];
+ for (i = 0; in[i]; i++)
+ if (!isspace((int)in[i])) {
+ first = i;
+ break;
+ }
- return sum;
+ if (first == -1) {
+ // There are no non-space characters.
+ out[0] = '\0';
+ return;
+ }
+
+ // Find the last non-space character.
+ for (i = strlen(in)-1; i >= first && isspace((int)in[i]); i--)
+ ;
+ int last = i;
+
+ strncpy(out, in+first, last-first+1);
+ out[last-first+1] = '\0';
+}
+
+// Convenience function for formatting strings from ata_identify_device
+void ata_format_id_string(char * out, const unsigned char * in, int n)
+{
+ bool must_swap = true;
+#ifdef __NetBSD__
+ /* NetBSD kernel delivers IDENTIFY data in host byte order (but all else is LE) */
+ // TODO: Handle NetBSD case in os_netbsd.cpp
+ if (isbigendian())
+ must_swap = !must_swap;
+#endif
+
+ char tmp[65];
+ n = n > 64 ? 64 : n;
+ if (!must_swap)
+ strncpy(tmp, (const char *)in, n);
+ else
+ swapbytes(tmp, (const char *)in, n);
+ tmp[n] = '\0';
+ trim(out, tmp);
}
// returns -1 if command fails or the device is in Sleep mode, else
// 80h device is in Idle mode.
// FFh device is in Active mode or Idle mode.
-int ataCheckPowerMode(int device) {
+int ataCheckPowerMode(ata_device * device) {
unsigned char result;
if ((smartcommandhandler(device, CHECK_POWER_MODE, 0, (char *)&result)))
return (int)result;
}
+// Issue a no-data ATA command with optional sector count register value
+bool ata_nodata_command(ata_device * device, unsigned char command,
+ int sector_count /* = -1 */)
+{
+ ata_cmd_in in;
+ in.in_regs.command = command;
+ if (sector_count >= 0)
+ in.in_regs.sector_count = sector_count;
+
+ return device->ata_pass_through(in);
+}
+// Issue SET FEATURES command with optional sector count register value
+bool ata_set_features(ata_device * device, unsigned char features,
+ int sector_count /* = -1 */)
+{
+ ata_cmd_in in;
+ in.in_regs.command = ATA_SET_FEATURES;
+ in.in_regs.features = features;
+ if (sector_count >= 0)
+ in.in_regs.sector_count = sector_count;
+ return device->ata_pass_through(in);
+}
// Reads current Device Identity info (512 bytes) into buf. Returns 0
// if all OK. Returns -1 if no ATA Device identity can be
// capable). The value of the integer helps identify the type of
// Packet device, which is useful so that the user can connect the
// formal device number with whatever object is inside their computer.
-int ataReadHDIdentity (int device, struct ata_identify_device *buf){
+int ata_read_identity(ata_device * device, ata_identify_device * buf, bool fix_swapped_id,
+ unsigned char * raw_buf /* = 0 */)
+{
unsigned short *rawshort=(unsigned short *)buf;
unsigned char *rawbyte =(unsigned char *)buf;
// See if device responds either to IDENTIFY DEVICE or IDENTIFY
// PACKET DEVICE
+ bool packet = false;
if ((smartcommandhandler(device, IDENTIFY, 0, (char *)buf))){
if (smartcommandhandler(device, PIDENTIFY, 0, (char *)buf)){
return -1;
}
+ packet = true;
+ }
+
+ unsigned i;
+ if (fix_swapped_id) {
+ // Swap ID strings
+ for (i = 0; i < sizeof(buf->serial_no)-1; i += 2)
+ swap2((char *)(buf->serial_no+i));
+ for (i = 0; i < sizeof(buf->fw_rev)-1; i += 2)
+ swap2((char *)(buf->fw_rev+i));
+ for (i = 0; i < sizeof(buf->model)-1; i += 2)
+ swap2((char *)(buf->model+i));
}
+ // If requested, save raw data before endianness adjustments
+ if (raw_buf)
+ memcpy(raw_buf, buf, sizeof(*buf));
+
#ifndef __NetBSD__
// if machine is big-endian, swap byte order as needed
- // (the NetBSD kernel does deliver the results in host byte order)
+ // NetBSD kernel delivers IDENTIFY data in host byte order
+ // TODO: Handle NetBSD case in os_netbsd.cpp
if (isbigendian()){
- int i;
// swap various capability words that are needed
for (i=0; i<33; i++)
// If there is a checksum there, validate it
if ((rawshort[255] & 0x00ff) == 0x00a5 && checksum(rawbyte))
checksumwarning("Drive Identity Structure");
-
+
+ // AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
+ // T13/1699-D Revision 6a (Final Draft), September 6, 2008.
+ // Sections 7.16.7 and 7.17.6:
+ //
+ // Word 0 of IDENTIFY DEVICE data:
+ // Bit 15 = 0 : ATA device
+ //
+ // Word 0 of IDENTIFY PACKET DEVICE data:
+ // Bits 15:14 = 10b : ATAPI device
+ // Bits 15:14 = 11b : Reserved
+ // Bits 12:8 : Device type (SPC-4, e.g 0x05 = CD/DVD)
+
+ // CF+ and CompactFlash Specification Revision 4.0, May 24, 2006.
+ // Section 6.2.1.6:
+ //
+ // Word 0 of IDENTIFY DEVICE data:
+ // 848Ah = Signature for CompactFlash Storage Card
+ // 044Ah = Alternate value turns on ATA device while preserving all retired bits
+ // 0040h = Alternate value turns on ATA device while zeroing all retired bits
+
+ // Assume ATA if IDENTIFY DEVICE returns CompactFlash Signature
+ if (!packet && rawbyte[1] == 0x84 && rawbyte[0] == 0x8a)
+ return 0;
+
// If this is a PACKET DEVICE, return device type
if (rawbyte[1] & 0x80)
return 1+(rawbyte[1] & 0x1f);
return 0;
}
-// Returns ATA version as an integer, and a pointer to a string
-// describing which revision. Note that Revision 0 of ATA-3 does NOT
-// support SMART. For this one case we return -3 rather than +3 as
-// the version number. See notes above.
-int ataVersionInfo (const char** description, struct ata_identify_device *drive, unsigned short *minor){
- unsigned short major;
- int i;
+// Get World Wide Name (WWN) fields.
+// Return NAA field or -1 if WWN is unsupported.
+// Table 34 of T13/1699-D Revision 6a (ATA8-ACS), September 6, 2008.
+// (WWN was introduced in ATA/ATAPI-7 and is mandatory since ATA8-ACS Revision 3b)
+int ata_get_wwn(const ata_identify_device * id, unsigned & oui, uint64_t & unique_id)
+{
+ // Don't use word 84 to be compatible with some older ATA-7 disks
+ unsigned short word087 = id->csf_default;
+ if ((word087 & 0xc100) != 0x4100)
+ return -1; // word not valid or WWN support bit 8 not set
+
+ unsigned short word108 = id->words088_255[108-88];
+ unsigned short word109 = id->words088_255[109-88];
+ unsigned short word110 = id->words088_255[110-88];
+ unsigned short word111 = id->words088_255[111-88];
+
+ oui = ((word108 & 0x0fff) << 12) | (word109 >> 4);
+ unique_id = ((uint64_t)(word109 & 0xf) << 32)
+ | (unsigned)((word110 << 16) | word111);
+ return (word108 >> 12);
+}
- // check that arrays at the top of this file are defined
- // consistently
- if (sizeof(minor_str) != sizeof(char *)*(1+MINOR_MAX)){
- pout("Internal error in ataVersionInfo(). minor_str[] size %d\n"
- "is not consistent with value of MINOR_MAX+1 = %d\n",
- (int)(sizeof(minor_str)/sizeof(char *)), MINOR_MAX+1);
- fflush(NULL);
- abort();
- }
- if (sizeof(actual_ver) != sizeof(int)*(1+MINOR_MAX)){
- pout("Internal error in ataVersionInfo(). actual_ver[] size %d\n"
- "is not consistent with value of MINOR_MAX = %d\n",
- (int)(sizeof(actual_ver)/sizeof(int)), MINOR_MAX+1);
- fflush(NULL);
- abort();
- }
-
- // get major and minor ATA revision numbers
- major=drive->major_rev_num;
- *minor=drive->minor_rev_num;
-
- // First check if device has ANY ATA version information in it
- if (major==NOVAL_0 || major==NOVAL_1) {
- *description=NULL;
- return -1;
- }
-
- // The minor revision number has more information - try there first
- if (*minor && (*minor<=MINOR_MAX)){
- int std = actual_ver[*minor];
- if (std) {
- *description=minor_str[*minor];
- return std;
- }
- }
-
- // HDPARM has a very complicated algorithm from here on. Since SMART only
- // exists on ATA-3 and later standards, let's punt on this. If you don't
- // like it, please fix it. The code's in CVS.
- for (i=15; i>0; i--)
- if (major & (0x1<<i))
- break;
-
- *description=NULL;
- if (i==0)
+// Get nominal media rotation rate.
+// Returns: 0 = not reported, 1 = SSD, >1 = HDD rpm, < 0 = -(Unknown value)
+int ata_get_rotation_rate(const ata_identify_device * id)
+{
+ // Table 37 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008
+ // Table A.31 of T13/2161-D (ACS-3) Revision 3b, August 25, 2012
+ unsigned short word217 = id->words088_255[217-88];
+ if (word217 == 0x0000 || word217 == 0xffff)
+ return 0;
+ else if (word217 == 0x0001)
return 1;
+ else if (word217 > 0x0400)
+ return word217;
else
- return i;
+ return -(int)word217;
}
// returns 1 if SMART supported, 0 if SMART unsupported, -1 if can't tell
-int ataSmartSupport(struct ata_identify_device *drive){
+int ataSmartSupport(const ata_identify_device * drive)
+{
unsigned short word82=drive->command_set_1;
unsigned short word83=drive->command_set_2;
}
// returns 1 if SMART enabled, 0 if SMART disabled, -1 if can't tell
-int ataIsSmartEnabled(struct ata_identify_device *drive){
+int ataIsSmartEnabled(const ata_identify_device * drive)
+{
unsigned short word85=drive->cfs_enable_1;
unsigned short word87=drive->csf_default;
// Reads SMART attributes into *data
-int ataReadSmartValues(int device, struct ata_smart_values *data){
+int ataReadSmartValues(ata_device * device, struct ata_smart_values *data){
if (smartcommandhandler(device, READ_VALUES, 0, (char *)data)){
- syserror("Error SMART Values Read failed");
return -1;
}
// compute checksum
- if (checksum((unsigned char *)data))
+ if (checksum(data))
checksumwarning("SMART Attribute Data Structure");
- // byte swap if needed
+ // swap endian order if needed
if (isbigendian()){
int i;
swap2((char *)&(data->revnumber));
swap2((char *)&(data->total_time_to_complete_off_line));
swap2((char *)&(data->smart_capability));
+ swapx(&data->extend_test_completion_time_w);
for (i=0; i<NUMBER_ATA_SMART_ATTRIBUTES; i++){
struct ata_smart_attribute *x=data->vendor_attributes+i;
swap2((char *)&(x->flags));
// This corrects some quantities that are byte reversed in the SMART
// SELF TEST LOG
-void fixsamsungselftestlog(struct ata_smart_selftestlog *data){
- int i;
-
+static void fixsamsungselftestlog(ata_smart_selftestlog * data)
+{
// bytes 508/509 (numbered from 0) swapped (swap of self-test index
// with one byte of reserved.
swap2((char *)&(data->mostrecenttest));
// information about the TYPE of the self-test) is byte swapped with
// Self-test execution status byte. These are bytes N, N+1 in the
// entries.
- for (i=0; i<21; i++)
+ for (int i = 0; i < 21; i++)
swap2((char *)&(data->selftest_struct[i].selftestnumber));
return;
}
// Reads the Self Test Log (log #6)
-int ataReadSelfTestLog (int device, struct ata_smart_selftestlog *data){
+int ataReadSelfTestLog (ata_device * device, ata_smart_selftestlog * data,
+ firmwarebug_defs firmwarebugs)
+{
// get data from device
if (smartcommandhandler(device, READ_LOG, 0x06, (char *)data)){
- syserror("Error SMART Error Self-Test Log Read failed");
return -1;
}
// compute its checksum, and issue a warning if needed
- if (checksum((unsigned char *)data))
+ if (checksum(data))
checksumwarning("SMART Self-Test Log Structure");
// fix firmware bugs in self-test log
- if (con->fixfirmwarebug == FIX_SAMSUNG)
+ if (firmwarebugs.is_set(BUG_SAMSUNG))
fixsamsungselftestlog(data);
- // fix endian order, if needed
+ // swap endian order if needed
if (isbigendian()){
int i;
swap2((char*)&(data->revnumber));
return 0;
}
+// Print checksum warning for multi sector log
+static void check_multi_sector_sum(const void * data, unsigned nsectors, const char * msg)
+{
+ unsigned errs = 0;
+ for (unsigned i = 0; i < nsectors; i++) {
+ if (checksum((const unsigned char *)data + i*512))
+ errs++;
+ }
+ if (errs > 0) {
+ if (nsectors == 1)
+ checksumwarning(msg);
+ else
+ checksumwarning(strprintf("%s (%u/%u)", msg, errs, nsectors).c_str());
+ }
+}
-// Reads the Log Directory (log #0). Note: NO CHECKSUM!!
-int ataReadLogDirectory (int device, struct ata_smart_log_directory *data){
-
- // get data from device
- if (smartcommandhandler(device, READ_LOG, 0x00, (char *)data)){
- return -1;
+// Read SMART Extended Self-test Log
+bool ataReadExtSelfTestLog(ata_device * device, ata_smart_extselftestlog * log,
+ unsigned nsectors)
+{
+ if (!ataReadLogExt(device, 0x07, 0x00, 0, log, nsectors))
+ return false;
+
+ check_multi_sector_sum(log, nsectors, "SMART Extended Self-test Log Structure");
+
+ if (isbigendian()) {
+ swapx(&log->log_desc_index);
+ for (unsigned i = 0; i < nsectors; i++) {
+ for (unsigned j = 0; j < 19; j++)
+ swapx(&log->log_descs[i].timestamp);
+ }
}
+ return true;
+}
- // swap endian order if needed
- if (isbigendian()){
- swap2((char *)&(data->logversion));
+
+// Read GP Log page(s)
+bool ataReadLogExt(ata_device * device, unsigned char logaddr,
+ unsigned char features, unsigned page,
+ void * data, unsigned nsectors)
+{
+ ata_cmd_in in;
+ in.in_regs.command = ATA_READ_LOG_EXT;
+ in.in_regs.features = features; // log specific
+ in.set_data_in_48bit(data, nsectors);
+ in.in_regs.lba_low = logaddr;
+ in.in_regs.lba_mid_16 = page;
+
+ if (!device->ata_pass_through(in)) { // TODO: Debug output
+ if (nsectors <= 1) {
+ pout("ATA_READ_LOG_EXT (addr=0x%02x:0x%02x, page=%u, n=%u) failed: %s\n",
+ logaddr, features, page, nsectors, device->get_errmsg());
+ return false;
+ }
+
+ // Recurse to retry with single sectors,
+ // multi-sector reads may not be supported by ioctl.
+ for (unsigned i = 0; i < nsectors; i++) {
+ if (!ataReadLogExt(device, logaddr,
+ features, page + i,
+ (char *)data + 512*i, 1))
+ return false;
+ }
}
-
+
+ return true;
+}
+
+// Read SMART Log page(s)
+bool ataReadSmartLog(ata_device * device, unsigned char logaddr,
+ void * data, unsigned nsectors)
+{
+ ata_cmd_in in;
+ in.in_regs.command = ATA_SMART_CMD;
+ in.in_regs.features = ATA_SMART_READ_LOG_SECTOR;
+ in.set_data_in(data, nsectors);
+ in.in_regs.lba_high = SMART_CYL_HI;
+ in.in_regs.lba_mid = SMART_CYL_LOW;
+ in.in_regs.lba_low = logaddr;
+
+ if (!device->ata_pass_through(in)) { // TODO: Debug output
+ pout("ATA_SMART_READ_LOG failed: %s\n", device->get_errmsg());
+ return false;
+ }
+ return true;
+}
+
+
+
+// Reads the SMART or GPL Log Directory (log #0)
+int ataReadLogDirectory(ata_device * device, ata_smart_log_directory * data, bool gpl)
+{
+ if (!gpl) { // SMART Log directory
+ if (smartcommandhandler(device, READ_LOG, 0x00, (char *)data))
+ return -1;
+ }
+ else { // GP Log directory
+ if (!ataReadLogExt(device, 0x00, 0x00, 0, data, 1))
+ return -1;
+ }
+
+ // swap endian order if needed
+ if (isbigendian())
+ swapx(&data->logversion);
+
return 0;
}
// Reads the selective self-test log (log #9)
-int ataReadSelectiveSelfTestLog(int device, struct ata_selective_self_test_log *data){
+int ataReadSelectiveSelfTestLog(ata_device * device, struct ata_selective_self_test_log *data){
// get data from device
if (smartcommandhandler(device, READ_LOG, 0x09, (char *)data)){
- syserror("Error SMART Read Selective Self-Test Log failed");
return -1;
}
// compute its checksum, and issue a warning if needed
- if (checksum((unsigned char *)data))
+ if (checksum(data))
checksumwarning("SMART Selective Self-Test Log Structure");
// swap endian order if needed
swap2((char *)&(data->pendingtime));
}
- if (data->logversion != 1)
- pout("SMART Selective Self-Test Log Data Structure Revision Number (%d) should be 1\n", data->logversion);
-
return 0;
}
// Writes the selective self-test log (log #9)
-int ataWriteSelectiveSelfTestLog(int device, struct ata_smart_values *sv){
- int i;
+int ataWriteSelectiveSelfTestLog(ata_device * device, ata_selective_selftest_args & args,
+ const ata_smart_values * sv, uint64_t num_sectors,
+ const ata_selective_selftest_args * prev_args)
+{
+ // Disk size must be known
+ if (!num_sectors) {
+ pout("Disk size is unknown, unable to check selective self-test spans\n");
+ return -1;
+ }
+
+ // Read log
struct ata_selective_self_test_log sstlog, *data=&sstlog;
- unsigned char cksum=0;
unsigned char *ptr=(unsigned char *)data;
-
- // Read log
if (ataReadSelectiveSelfTestLog(device, data)) {
+ pout("SMART Read Selective Self-test Log failed: %s\n", device->get_errmsg());
pout("Since Read failed, will not attempt to WRITE Selective Self-test Log\n");
return -1;
}
- // Fix logversion if needed
- if (data->logversion !=1) {
- pout("Error SMART Selective Self-Test Log Data Structure Revision not recognized\n"
- "Revision number should be 1 but is %d. To be safe, aborting WRITE LOG\n", data->logversion);
- return -2;
- }
+ // Set log version
+ data->logversion = 1;
// Host is NOT allowed to write selective self-test log if a selective
// self-test is in progress.
if (0<data->currentspan && data->currentspan<6 && ((sv->self_test_exec_status)>>4)==15) {
- pout("Error SMART Selective or other Self-Test in progress.\n");
+ pout("SMART Selective or other Self-test in progress\n");
return -4;
}
-
- // Clear spans
- for (i=0; i<5; i++)
- memset(data->span+i, 0, sizeof(struct test_span));
-
- // Set spans for testing
- for (i=0; i<con->smartselectivenumspans; i++){
- data->span[i].start = con->smartselectivespan[i][0];
- data->span[i].end = con->smartselectivespan[i][1];
+
+ // Set start/end values based on old spans for special -t select,... options
+ int i;
+ for (i = 0; i < args.num_spans; i++) {
+ int mode = args.span[i].mode;
+ uint64_t start = args.span[i].start;
+ uint64_t end = args.span[i].end;
+ if (mode == SEL_CONT) {// redo or next dependig on last test status
+ switch (sv->self_test_exec_status >> 4) {
+ case 1: case 2: // Aborted/Interrupted by host
+ pout("Continue Selective Self-Test: Redo last span\n");
+ mode = SEL_REDO;
+ break;
+ default: // All others
+ pout("Continue Selective Self-Test: Start next span\n");
+ mode = SEL_NEXT;
+ break;
+ }
+ }
+
+ if ( (mode == SEL_REDO || mode == SEL_NEXT)
+ && prev_args && i < prev_args->num_spans
+ && !data->span[i].start && !data->span[i].end) {
+ // Some drives do not preserve the selective self-test log accross
+ // power-cyles. If old span on drive is cleared use span provided
+ // by caller. This is used by smartd (first span only).
+ data->span[i].start = prev_args->span[i].start;
+ data->span[i].end = prev_args->span[i].end;
+ }
+
+ switch (mode) {
+ case SEL_RANGE: // -t select,START-END
+ break;
+ case SEL_REDO: // -t select,redo... => Redo current
+ start = data->span[i].start;
+ if (end > 0) { // -t select,redo+SIZE
+ end--; end += start; // [oldstart, oldstart+SIZE)
+ }
+ else // -t select,redo
+ end = data->span[i].end; // [oldstart, oldend]
+ break;
+ case SEL_NEXT: // -t select,next... => Do next
+ if (data->span[i].end == 0) {
+ start = end = 0; break; // skip empty spans
+ }
+ start = data->span[i].end + 1;
+ if (start >= num_sectors)
+ start = 0; // wrap around
+ if (end > 0) { // -t select,next+SIZE
+ end--; end += start; // (oldend, oldend+SIZE]
+ }
+ else { // -t select,next
+ uint64_t oldsize = data->span[i].end - data->span[i].start + 1;
+ end = start + oldsize - 1; // (oldend, oldend+oldsize]
+ if (end >= num_sectors) {
+ // Adjust size to allow round-robin testing without future size decrease
+ uint64_t spans = (num_sectors + oldsize-1) / oldsize;
+ uint64_t newsize = (num_sectors + spans-1) / spans;
+ uint64_t newstart = num_sectors - newsize, newend = num_sectors - 1;
+ pout("Span %d changed from %" PRIu64 "-%" PRIu64 " (%" PRIu64 " sectors)\n",
+ i, start, end, oldsize);
+ pout(" to %" PRIu64 "-%" PRIu64 " (%" PRIu64 " sectors) (%" PRIu64 " spans)\n",
+ newstart, newend, newsize, spans);
+ start = newstart; end = newend;
+ }
+ }
+ break;
+ default:
+ pout("ataWriteSelectiveSelfTestLog: Invalid mode %d\n", mode);
+ return -1;
+ }
+ // Range check
+ if (start < num_sectors && num_sectors <= end) {
+ if (end != ~(uint64_t)0) // -t select,N-max
+ pout("Size of self-test span %d decreased according to disk size\n", i);
+ end = num_sectors - 1;
+ }
+ if (!(start <= end && end < num_sectors)) {
+ pout("Invalid selective self-test span %d: %" PRIu64 "-%" PRIu64 " (%" PRIu64 " sectors)\n",
+ i, start, end, num_sectors);
+ return -1;
+ }
+ // Return the actual mode and range to caller.
+ args.span[i].mode = mode;
+ args.span[i].start = start;
+ args.span[i].end = end;
+ }
+
+ // Clear spans
+ for (i=0; i<5; i++)
+ memset(data->span+i, 0, sizeof(struct test_span));
+
+ // Set spans for testing
+ for (i = 0; i < args.num_spans; i++){
+ data->span[i].start = args.span[i].start;
+ data->span[i].end = args.span[i].end;
}
// host must initialize to zero before initiating selective self-test
data->currentspan=0;
// Perform off-line scan after selective test?
- if (1 == con->scanafterselect)
+ if (args.scan_after_select == 1)
// NO
data->flags &= ~SELECTIVE_FLAG_DOSCAN;
- else if (2 == con->scanafterselect)
+ else if (args.scan_after_select == 2)
// YES
data->flags |= SELECTIVE_FLAG_DOSCAN;
data->flags &= ~(SELECTIVE_FLAG_PENDING);
// modify pending time?
- if (con->pendingtime)
- data->pendingtime=(unsigned short)(con->pendingtime-1);
+ if (args.pending_time)
+ data->pendingtime = (unsigned short)(args.pending_time-1);
// Set checksum to zero, then compute checksum
data->checksum=0;
+ unsigned char cksum=0;
for (i=0; i<512; i++)
cksum+=ptr[i];
cksum=~cksum;
cksum+=1;
data->checksum=cksum;
- // swap endian order if needed
+ // swap endian order if needed
if (isbigendian()){
- int i;
swap2((char *)&(data->logversion));
- for (i=0;i<5;i++){
- swap8((char *)&(data->span[i].start));
- swap8((char *)&(data->span[i].end));
+ for (int b = 0; b < 5; b++) {
+ swap8((char *)&(data->span[b].start));
+ swap8((char *)&(data->span[b].end));
}
swap8((char *)&(data->currentlba));
swap2((char *)&(data->currentspan));
// write new selective self-test log
if (smartcommandhandler(device, WRITE_LOG, 0x09, (char *)data)){
- syserror("Error Write Selective Self-Test Log failed");
+ pout("Write Selective Self-test Log failed: %s\n", device->get_errmsg());
return -3;
}
// This corrects some quantities that are byte reversed in the SMART
// ATA ERROR LOG.
-void fixsamsungerrorlog(struct ata_smart_errorlog *data){
- int i,j;
-
+static void fixsamsungerrorlog(ata_smart_errorlog * data)
+{
// FIXED IN SAMSUNG -25 FIRMWARE???
// Device error count in bytes 452-3
swap2((char *)&(data->ata_error_count));
// FIXED IN SAMSUNG -22a FIRMWARE
// step through 5 error log data structures
- for (i=0; i<5; i++){
+ for (int i = 0; i < 5; i++){
// step through 5 command data structures
- for (j=0; j<5; j++)
+ for (int j = 0; j < 5; j++)
// Command data structure 4-byte millisec timestamp. These are
// bytes (N+8, N+9, N+10, N+11).
swap4((char *)&(data->errorlog_struct[i].commands[j].timestamp));
}
// NEEDED ONLY FOR SAMSUNG -22 (some) -23 AND -24?? FIRMWARE
-void fixsamsungerrorlog2(struct ata_smart_errorlog *data){
+static void fixsamsungerrorlog2(ata_smart_errorlog * data)
+{
// Device error count in bytes 452-3
swap2((char *)&(data->ata_error_count));
return;
// Reads the Summary SMART Error Log (log #1). The Comprehensive SMART
// Error Log is #2, and the Extended Comprehensive SMART Error log is
// #3
-int ataReadErrorLog (int device, struct ata_smart_errorlog *data){
+int ataReadErrorLog (ata_device * device, ata_smart_errorlog *data,
+ firmwarebug_defs firmwarebugs)
+{
// get data from device
if (smartcommandhandler(device, READ_LOG, 0x01, (char *)data)){
- syserror("Error SMART Error Log Read failed");
return -1;
}
// compute its checksum, and issue a warning if needed
- if (checksum((unsigned char *)data))
+ if (checksum(data))
checksumwarning("SMART ATA Error Log Structure");
// Some disks have the byte order reversed in some SMART Summary
// Error log entries
- if (con->fixfirmwarebug == FIX_SAMSUNG)
+ if (firmwarebugs.is_set(BUG_SAMSUNG))
fixsamsungerrorlog(data);
- else if (con->fixfirmwarebug == FIX_SAMSUNG2)
+ else if (firmwarebugs.is_set(BUG_SAMSUNG2))
fixsamsungerrorlog2(data);
- // Correct endian order if necessary
+ // swap endian order if needed
if (isbigendian()){
int i,j;
return 0;
}
-int ataReadSmartThresholds (int device, struct ata_smart_thresholds_pvt *data){
+
+// Fix LBA byte ordering of Extended Comprehensive Error Log
+// if little endian instead of ATA register ordering is provided
+template <class T>
+static inline void fix_exterrlog_lba_cmd(T & cmd)
+{
+ T org = cmd;
+ cmd.lba_mid_register_hi = org.lba_high_register;
+ cmd.lba_low_register_hi = org.lba_mid_register_hi;
+ cmd.lba_high_register = org.lba_mid_register;
+ cmd.lba_mid_register = org.lba_low_register_hi;
+}
+
+static void fix_exterrlog_lba(ata_smart_exterrlog * log, unsigned nsectors)
+{
+ for (unsigned i = 0; i < nsectors; i++) {
+ for (int ei = 0; ei < 4; ei++) {
+ ata_smart_exterrlog_error_log & entry = log[i].error_logs[ei];
+ fix_exterrlog_lba_cmd(entry.error);
+ for (int ci = 0; ci < 5; ci++)
+ fix_exterrlog_lba_cmd(entry.commands[ci]);
+ }
+ }
+}
+
+// Read Extended Comprehensive Error Log
+bool ataReadExtErrorLog(ata_device * device, ata_smart_exterrlog * log,
+ unsigned nsectors, firmwarebug_defs firmwarebugs)
+{
+ if (!ataReadLogExt(device, 0x03, 0x00, 0, log, nsectors))
+ return false;
+
+ check_multi_sector_sum(log, nsectors, "SMART Extended Comprehensive Error Log Structure");
+
+ if (isbigendian()) {
+ swapx(&log->device_error_count);
+ swapx(&log->error_log_index);
+ for (unsigned i = 0; i < nsectors; i++) {
+ for (unsigned j = 0; j < 4; j++) {
+ for (unsigned k = 0; k < 5; k++)
+ swapx(&log[i].error_logs[j].commands[k].timestamp);
+ swapx(&log[i].error_logs[j].error.timestamp);
+ }
+ }
+ }
+
+ if (firmwarebugs.is_set(BUG_XERRORLBA))
+ fix_exterrlog_lba(log, nsectors);
+
+ return true;
+}
+
+
+int ataReadSmartThresholds (ata_device * device, struct ata_smart_thresholds_pvt *data){
// get data from device
if (smartcommandhandler(device, READ_THRESHOLDS, 0, (char *)data)){
- syserror("Error SMART Thresholds Read failed");
return -1;
}
// compute its checksum, and issue a warning if needed
- if (checksum((unsigned char *)data))
+ if (checksum(data))
checksumwarning("SMART Attribute Thresholds Structure");
- // byte swap if needed
+ // swap endian order if needed
if (isbigendian())
swap2((char *)&(data->revnumber));
return 0;
}
-int ataEnableSmart (int device ){
+int ataEnableSmart (ata_device * device ){
if (smartcommandhandler(device, ENABLE, 0, NULL)){
- syserror("Error SMART Enable failed");
return -1;
}
return 0;
}
-int ataDisableSmart (int device ){
+int ataDisableSmart (ata_device * device ){
if (smartcommandhandler(device, DISABLE, 0, NULL)){
- syserror("Error SMART Disable failed");
return -1;
}
return 0;
}
-int ataEnableAutoSave(int device){
+int ataEnableAutoSave(ata_device * device){
if (smartcommandhandler(device, AUTOSAVE, 241, NULL)){
- syserror("Error SMART Enable Auto-save failed");
return -1;
}
return 0;
}
-int ataDisableAutoSave(int device){
+int ataDisableAutoSave(ata_device * device){
if (smartcommandhandler(device, AUTOSAVE, 0, NULL)){
- syserror("Error SMART Disable Auto-save failed");
return -1;
}
return 0;
// marked "OBSOLETE". It is defined in SFF-8035i Revision 2, and most
// vendors still support it for backwards compatibility. IBM documents
// it for some drives.
-int ataEnableAutoOffline (int device ){
+int ataEnableAutoOffline (ata_device * device){
/* timer hard coded to 4 hours */
if (smartcommandhandler(device, AUTO_OFFLINE, 248, NULL)){
- syserror("Error SMART Enable Automatic Offline failed");
return -1;
}
return 0;
// Another Obsolete Command. See comments directly above, associated
// with the corresponding Enable command.
-int ataDisableAutoOffline (int device ){
+int ataDisableAutoOffline (ata_device * device){
if (smartcommandhandler(device, AUTO_OFFLINE, 0, NULL)){
- syserror("Error SMART Disable Automatic Offline failed");
return -1;
}
return 0;
// guaranteed to return 1, else zero. Note that it should return 1
// regardless of whether the disk's SMART status is 'healthy' or
// 'failing'.
-int ataDoesSmartWork(int device){
+int ataDoesSmartWork(ata_device * device){
int retval=smartcommandhandler(device, STATUS, 0, NULL);
if (-1 == retval)
// This function uses a different interface (DRIVE_TASK) than the
// other commands in this file.
-int ataSmartStatus2(int device){
+int ataSmartStatus2(ata_device * device){
return smartcommandhandler(device, STATUS_CHECK, 0, NULL);
}
// This is the way to execute ALL tests: offline, short self-test,
// extended self test, with and without captive mode, etc.
-int ataSmartTest(int device, int testtype, struct ata_smart_values *sv) {
- char cmdmsg[128],*type,*captive;
- int errornum, cap, retval, select=0;
+// TODO: Move to ataprint.cpp ?
+int ataSmartTest(ata_device * device, int testtype, bool force,
+ const ata_selective_selftest_args & selargs,
+ const ata_smart_values * sv, uint64_t num_sectors)
+{
+ char cmdmsg[128]; const char *type, *captive;
+ int cap, retval, select=0;
// Boolean, if set, says test is captive
cap=testtype & CAPTIVE_MASK;
else if ((select=(testtype==SELECTIVE_SELF_TEST || testtype==SELECTIVE_CAPTIVE_SELF_TEST)))
type="Selective self-test";
else
- type="[Unrecognized] self-test";
-
+ type = 0;
+
+ // Check whether another test is already running
+ if (type && (sv->self_test_exec_status >> 4) == 0xf) {
+ if (!force) {
+ pout("Can't start self-test without aborting current test (%d0%% remaining),\n"
+ "%srun 'smartctl -X' to abort test.\n",
+ sv->self_test_exec_status & 0x0f,
+ (!select ? "add '-t force' option to override, or " : ""));
+ return -1;
+ }
+ }
+ else
+ force = false;
+
// If doing a selective self-test, first use WRITE_LOG to write the
// selective self-test log.
- if (select && (retval=ataWriteSelectiveSelfTestLog(device, sv))) {
+ ata_selective_selftest_args selargs_io = selargs; // filled with info about actual spans
+ if (select && (retval = ataWriteSelectiveSelfTestLog(device, selargs_io, sv, num_sectors))) {
if (retval==-4)
pout("Can't start selective self-test without aborting current test: use '-X' option to smartctl.\n");
return retval;
// Print ouf message that we are sending the command to test
if (testtype==ABORT_SELF_TEST)
- sprintf(cmdmsg,"Abort SMART off-line mode self-test routine");
+ snprintf(cmdmsg, sizeof(cmdmsg), "Abort SMART off-line mode self-test routine");
+ else if (!type)
+ snprintf(cmdmsg, sizeof(cmdmsg), "SMART EXECUTE OFF-LINE IMMEDIATE subcommand 0x%02x", testtype);
else
- sprintf(cmdmsg,"Execute SMART %s routine immediately in %s mode",type,captive);
+ snprintf(cmdmsg, sizeof(cmdmsg), "Execute SMART %s routine immediately in %s mode", type, captive);
pout("Sending command: \"%s\".\n",cmdmsg);
if (select) {
int i;
pout("SPAN STARTING_LBA ENDING_LBA\n");
- for (i = 0; i < con->smartselectivenumspans; i++)
- pout(" %d %20"PRId64" %20"PRId64"\n", i,
- con->smartselectivespan[i][0],
- con->smartselectivespan[i][1]);
+ for (i = 0; i < selargs_io.num_spans; i++)
+ pout(" %d %20" PRId64 " %20" PRId64 "\n", i,
+ selargs_io.span[i].start,
+ selargs_io.span[i].end);
}
// Now send the command to test
- errornum=smartcommandhandler(device, IMMEDIATE_OFFLINE, testtype, NULL);
-
- if (errornum && !(cap && errno==EIO)){
- char errormsg[128];
- sprintf(errormsg,"Command \"%s\" failed",cmdmsg);
- syserror(errormsg);
- pout("\n");
- return -1;
+ if (smartcommandhandler(device, IMMEDIATE_OFFLINE, testtype, NULL)) {
+ if (!(cap && device->get_errno() == EIO)) {
+ pout("Command \"%s\" failed: %s\n", cmdmsg, device->get_errmsg());
+ return -1;
+ }
}
// Since the command succeeded, tell user
if (testtype==ABORT_SELF_TEST)
pout("Self-testing aborted!\n");
- else
- pout("Drive command \"%s\" successful.\nTesting has begun.\n",cmdmsg);
+ else {
+ pout("Drive command \"%s\" successful.\n", cmdmsg);
+ if (type)
+ pout("Testing has begun%s.\n", (force ? " (previous test aborted)" : ""));
+ }
return 0;
}
/* Test Time Functions */
-int TestTime(struct ata_smart_values *data,int testtype){
+int TestTime(const ata_smart_values *data, int testtype)
+{
switch (testtype){
case OFFLINE_FULL_SCAN:
return (int) data->total_time_to_complete_off_line;
return (int) data->short_test_completion_time;
case EXTEND_SELF_TEST:
case EXTEND_CAPTIVE_SELF_TEST:
- return (int) data->extend_test_completion_time;
+ if (data->extend_test_completion_time_b == 0xff
+ && data->extend_test_completion_time_w != 0x0000
+ && data->extend_test_completion_time_w != 0xffff)
+ return data->extend_test_completion_time_w; // ATA-8
+ else
+ return data->extend_test_completion_time_b;
case CONVEYANCE_SELF_TEST:
case CONVEYANCE_CAPTIVE_SELF_TEST:
return (int) data->conveyance_test_completion_time;
// word 84 and 87. Top two bits must match the pattern 01. BEFORE
// ATA-6 these top two bits still had to match the pattern 01, but the
// remaining bits were reserved (==0).
-int isSmartErrorLogCapable (struct ata_smart_values *data, struct ata_identify_device *identity){
-
+int isSmartErrorLogCapable (const ata_smart_values * data, const ata_identify_device * identity)
+{
unsigned short word84=identity->command_set_extension;
unsigned short word87=identity->csf_default;
int isata6=identity->major_rev_num & (0x01<<6);
// See previous function. If the error log exists then the self-test
// log should (must?) also exist.
-int isSmartTestLogCapable (struct ata_smart_values *data, struct ata_identify_device *identity){
-
+int isSmartTestLogCapable (const ata_smart_values * data, const ata_identify_device *identity)
+{
unsigned short word84=identity->command_set_extension;
unsigned short word87=identity->csf_default;
int isata6=identity->major_rev_num & (0x01<<6);
// otherwise we'll use the poorly documented capability bit
- return data->errorlog_capability & 0x01;
+ return data->errorlog_capability & 0x01;
}
-int isGeneralPurposeLoggingCapable(struct ata_identify_device *identity){
+int isGeneralPurposeLoggingCapable(const ata_identify_device *identity)
+{
unsigned short word84=identity->command_set_extension;
unsigned short word87=identity->csf_default;
// IDENTIFY word 87 (if top two bits of word 87 match pattern 01).
// However this was only introduced in ATA-6 (but self-test log was in
// ATA-5).
-int isSupportExecuteOfflineImmediate(struct ata_smart_values *data){
- return data->offline_data_collection_capability & 0x01;
+int isSupportExecuteOfflineImmediate(const ata_smart_values *data)
+{
+ return data->offline_data_collection_capability & 0x01;
}
+
// Note in the ATA-5 standard, the following bit is listed as "Vendor
// Specific". So it may not be reliable. The only use of this that I
// have found is in IBM drives, where it is well-documented. See for
// example page 170, section 13.32.1.18 of the IBM Travelstar 40GNX
// hard disk drive specifications page 164 Revision 1.1 22 Apr 2002.
-int isSupportAutomaticTimer(struct ata_smart_values *data){
- return data->offline_data_collection_capability & 0x02;
+int isSupportAutomaticTimer(const ata_smart_values * data)
+{
+ return data->offline_data_collection_capability & 0x02;
}
-int isSupportOfflineAbort(struct ata_smart_values *data){
- return data->offline_data_collection_capability & 0x04;
+int isSupportOfflineAbort(const ata_smart_values *data)
+{
+ return data->offline_data_collection_capability & 0x04;
}
-int isSupportOfflineSurfaceScan(struct ata_smart_values *data){
+int isSupportOfflineSurfaceScan(const ata_smart_values * data)
+{
return data->offline_data_collection_capability & 0x08;
}
-int isSupportSelfTest (struct ata_smart_values *data){
+int isSupportSelfTest (const ata_smart_values * data)
+{
return data->offline_data_collection_capability & 0x10;
}
-int isSupportConveyanceSelfTest(struct ata_smart_values *data){
+int isSupportConveyanceSelfTest(const ata_smart_values * data)
+{
return data->offline_data_collection_capability & 0x20;
}
-int isSupportSelectiveSelfTest(struct ata_smart_values *data){
+int isSupportSelectiveSelfTest(const ata_smart_values * data)
+{
return data->offline_data_collection_capability & 0x40;
}
+// Get attribute state
+ata_attr_state ata_get_attr_state(const ata_smart_attribute & attr,
+ int attridx,
+ const ata_smart_threshold_entry * thresholds,
+ const ata_vendor_attr_defs & defs,
+ unsigned char * threshval /* = 0 */)
+{
+ if (!attr.id)
+ return ATTRSTATE_NON_EXISTING;
+
+ // Normalized values (current,worst,threshold) not valid
+ // if specified by '-v' option.
+ // (Some SSD disks uses these bytes to store raw value).
+ if (defs[attr.id].flags & ATTRFLAG_NO_NORMVAL)
+ return ATTRSTATE_NO_NORMVAL;
+
+ // Normally threshold is at same index as attribute
+ int i = attridx;
+ if (thresholds[i].id != attr.id) {
+ // Find threshold id in table
+ for (i = 0; thresholds[i].id != attr.id; ) {
+ if (++i >= NUMBER_ATA_SMART_ATTRIBUTES)
+ // Threshold id missing or thresholds cannot be read
+ return ATTRSTATE_NO_THRESHOLD;
+ }
+ }
+ unsigned char threshold = thresholds[i].threshold;
+ // Return threshold if requested
+ if (threshval)
+ *threshval = threshold;
-// Loop over all valid attributes. If they are prefailure attributes
-// and are at or below the threshold value, then return the ID of the
-// first failing attribute found. Return 0 if all prefailure
-// attributes are in bounds. The spec says "Bit 0
-// -Pre-failure/advisory - If the value of this bit equals zero, an
-// attribute value less than or equal to its corresponding attribute
-// threshold indicates an advisory condition where the usage or age of
-// the device has exceeded its intended design life period. If the
-// value of this bit equals one, an atribute value less than or equal
-// to its corresponding attribute threshold indicates a pre-failure
-// condition where imminent loss of data is being predicted."
+ // Don't report a failed attribute if its threshold is 0.
+ // ATA-3 (X3T13/2008D Revision 7b) declares 0x00 as the "always passing"
+ // threshold (Later ATA versions declare all thresholds as "obsolete").
+ // In practice, threshold value 0 is often used for usage attributes.
+ if (!threshold)
+ return ATTRSTATE_OK;
+ // Failed now if current value is below threshold
+ if (attr.current <= threshold)
+ return ATTRSTATE_FAILED_NOW;
-// onlyfailed=0 : are or were any age or prefailure attributes <= threshold
-// onlyfailed=1: are any prefailure attributes <= threshold now
-int ataCheckSmart(struct ata_smart_values *data,
- struct ata_smart_thresholds_pvt *thresholds,
- int onlyfailed){
- int i;
-
- // loop over all attributes
- for (i=0; i<NUMBER_ATA_SMART_ATTRIBUTES; i++){
-
- // pointers to disk's values and vendor's thresholds
- struct ata_smart_attribute *disk=data->vendor_attributes+i;
- struct ata_smart_threshold_entry *thre=thresholds->thres_entries+i;
-
- // consider only valid attributes
- if (disk->id && thre->id){
- int failednow,failedever;
-
- failednow =disk->current <= thre->threshold;
- failedever=disk->worst <= thre->threshold;
-
- if (!onlyfailed && failedever)
- return disk->id;
-
- if (onlyfailed && failednow && ATTRIBUTE_FLAGS_PREFAILURE(disk->flags))
- return disk->id;
- }
- }
- return 0;
+ // Failed in the past if worst value is below threshold
+ if (!(defs[attr.id].flags & ATTRFLAG_NO_WORSTVAL) && attr.worst <= threshold)
+ return ATTRSTATE_FAILED_PAST;
+
+ return ATTRSTATE_OK;
}
+// Get default raw value print format
+static ata_attr_raw_format get_default_raw_format(unsigned char id)
+{
+ switch (id) {
+ case 3: // Spin-up time
+ return RAWFMT_RAW16_OPT_AVG16;
+ case 5: // Reallocated sector count
+ case 196: // Reallocated event count
+ return RAWFMT_RAW16_OPT_RAW16;
-// This checks the n'th attribute in the attribute list, NOT the
-// attribute with id==n. If the attribute does not exist, or the
-// attribute is > threshold, then returns zero. If the attribute is
-// <= threshold (failing) then we the attribute number if it is a
-// prefail attribute. Else we return minus the attribute number if it
-// is a usage attribute.
-int ataCheckAttribute(struct ata_smart_values *data,
- struct ata_smart_thresholds_pvt *thresholds,
- int n){
- struct ata_smart_attribute *disk;
- struct ata_smart_threshold_entry *thre;
-
- if (n<0 || n>=NUMBER_ATA_SMART_ATTRIBUTES || !data || !thresholds)
- return 0;
-
- // pointers to disk's values and vendor's thresholds
- disk=data->vendor_attributes+n;
- thre=thresholds->thres_entries+n;
+ case 9: // Power on hours
+ case 240: // Head flying hours
+ return RAWFMT_RAW24_OPT_RAW8;
- if (!disk || !thre)
- return 0;
-
- // consider only valid attributes, check for failure
- if (!disk->id || !thre->id || (disk->id != thre->id) || disk->current> thre->threshold)
- return 0;
-
- // We have found a failed attribute. Return positive or negative?
- if (ATTRIBUTE_FLAGS_PREFAILURE(disk->flags))
- return disk->id;
- else
- return -1*(disk->id);
+ case 190: // Temperature
+ case 194:
+ return RAWFMT_TEMPMINMAX;
+
+ default:
+ return RAWFMT_RAW48;
+ }
}
+// Get attribute raw value.
+uint64_t ata_get_attr_raw_value(const ata_smart_attribute & attr,
+ const ata_vendor_attr_defs & defs)
+{
+ const ata_vendor_attr_defs::entry & def = defs[attr.id];
+
+ // Use default byteorder if not specified
+ const char * byteorder = def.byteorder;
+ if (!*byteorder) {
+ switch (def.raw_format) {
+ case RAWFMT_RAW64:
+ case RAWFMT_HEX64:
+ byteorder = "543210wv"; break;
+ case RAWFMT_RAW56:
+ case RAWFMT_HEX56:
+ case RAWFMT_RAW24_DIV_RAW32:
+ case RAWFMT_MSEC24_HOUR32:
+ byteorder = "r543210"; break;
+ default:
+ byteorder = "543210"; break;
+ }
+ }
-// This routine prints the raw value of an attribute as a text string
-// into out. It also returns this 48-bit number as a long long. The
-// array defs[] contains non-zero values if particular attributes have
-// non-default interpretations.
+ // Build 64-bit value from selected bytes
+ uint64_t rawvalue = 0;
+ for (int i = 0; byteorder[i]; i++) {
+ unsigned char b;
+ switch (byteorder[i]) {
+ case '0': b = attr.raw[0]; break;
+ case '1': b = attr.raw[1]; break;
+ case '2': b = attr.raw[2]; break;
+ case '3': b = attr.raw[3]; break;
+ case '4': b = attr.raw[4]; break;
+ case '5': b = attr.raw[5]; break;
+ case 'r': b = attr.reserv; break;
+ case 'v': b = attr.current; break;
+ case 'w': b = attr.worst; break;
+ default : b = 0; break;
+ }
+ rawvalue <<= 8; rawvalue |= b;
+ }
-int64_t ataPrintSmartAttribRawValue(char *out,
- struct ata_smart_attribute *attribute,
- unsigned char *defs){
- int64_t rawvalue;
- unsigned word[3];
- int j;
- unsigned char select;
-
- // convert the six individual bytes to a long long (8 byte) integer.
- // This is the value that we'll eventually return.
- rawvalue = 0;
- for (j=0; j<6; j++) {
- // This looks a bit roundabout, but is necessary. Don't
- // succumb to the temptation to use raw[j]<<(8*j) since under
- // the normal rules this will be promoted to the native type.
- // On a 32 bit machine this might then overflow.
- int64_t temp;
- temp = attribute->raw[j];
- temp <<= 8*j;
- rawvalue |= temp;
- }
-
- // convert quantities to three two-byte words
- for (j=0; j<3; j++){
- word[j] = attribute->raw[2*j+1];
- word[j] <<= 8;
- word[j] |= attribute->raw[2*j];
+ return rawvalue;
+}
+
+// Helper functions for RAWFMT_TEMPMINMAX
+static inline int check_temp_word(unsigned word)
+{
+ if (word <= 0x7f)
+ return 0x11; // >= 0, signed byte or word
+ if (word <= 0xff)
+ return 0x01; // < 0, signed byte
+ if (0xff80 <= word)
+ return 0x10; // < 0, signed word
+ return 0x00;
+}
+
+static bool check_temp_range(int t, unsigned char ut1, unsigned char ut2,
+ int & lo, int & hi)
+{
+ int t1 = (signed char)ut1, t2 = (signed char)ut2;
+ if (t1 > t2) {
+ int tx = t1; t1 = t2; t2 = tx;
}
-
- // if no data array, Attributes have default interpretations
- if (defs)
- select=defs[attribute->id];
- else
- select=0;
-
- // Print six one-byte quantities.
- if (select==253){
- for (j=0; j<5; j++)
- out+=sprintf(out, "%d ", attribute->raw[5-j]);
- out+=sprintf(out, "%d ", attribute->raw[0]);
- return rawvalue;
- }
-
- // Print three two-byte quantities
- if (select==254){
- out+=sprintf(out, "%d %d %d", word[2], word[1], word[0]);
- return rawvalue;
- }
-
- // Print one six-byte quantity
- if (select==255){
- out+=sprintf(out, "%"PRIu64, rawvalue);
- return rawvalue;
+
+ if ( -60 <= t1 && t1 <= t && t <= t2 && t2 <= 120
+ && !(t1 == -1 && t2 <= 0) ) {
+ lo = t1; hi = t2;
+ return true;
}
+ return false;
+}
- // This switch statement is where we handle Raw attributes
- // that are stored in an unusual vendor-specific format,
- switch (attribute->id){
- // Spin-up time
- case 3:
- out+=sprintf(out, "%d", word[0]);
- // if second nonzero then it stores the average spin-up time
+// Format attribute raw value.
+std::string ata_format_attr_raw_value(const ata_smart_attribute & attr,
+ const ata_vendor_attr_defs & defs)
+{
+ // Get 48 bit or 64 bit raw value
+ uint64_t rawvalue = ata_get_attr_raw_value(attr, defs);
+
+ // Split into bytes and words
+ unsigned char raw[6];
+ raw[0] = (unsigned char) rawvalue;
+ raw[1] = (unsigned char)(rawvalue >> 8);
+ raw[2] = (unsigned char)(rawvalue >> 16);
+ raw[3] = (unsigned char)(rawvalue >> 24);
+ raw[4] = (unsigned char)(rawvalue >> 32);
+ raw[5] = (unsigned char)(rawvalue >> 40);
+ unsigned word[3];
+ word[0] = raw[0] | (raw[1] << 8);
+ word[1] = raw[2] | (raw[3] << 8);
+ word[2] = raw[4] | (raw[5] << 8);
+
+ // Get print format
+ ata_attr_raw_format format = defs[attr.id].raw_format;
+ if (format == RAWFMT_DEFAULT)
+ format = get_default_raw_format(attr.id);
+
+ // Print
+ std::string s;
+ switch (format) {
+ case RAWFMT_RAW8:
+ s = strprintf("%d %d %d %d %d %d",
+ raw[5], raw[4], raw[3], raw[2], raw[1], raw[0]);
+ break;
+
+ case RAWFMT_RAW16:
+ s = strprintf("%u %u %u", word[2], word[1], word[0]);
+ break;
+
+ case RAWFMT_RAW48:
+ case RAWFMT_RAW56:
+ case RAWFMT_RAW64:
+ s = strprintf("%" PRIu64, rawvalue);
+ break;
+
+ case RAWFMT_HEX48:
+ s = strprintf("0x%012" PRIx64, rawvalue);
+ break;
+
+ case RAWFMT_HEX56:
+ s = strprintf("0x%014" PRIx64, rawvalue);
+ break;
+
+ case RAWFMT_HEX64:
+ s = strprintf("0x%016" PRIx64, rawvalue);
+ break;
+
+ case RAWFMT_RAW16_OPT_RAW16:
+ s = strprintf("%u", word[0]);
+ if (word[1] || word[2])
+ s += strprintf(" (%u %u)", word[2], word[1]);
+ break;
+
+ case RAWFMT_RAW16_OPT_AVG16:
+ s = strprintf("%u", word[0]);
if (word[1])
- out+=sprintf(out, " (Average %d)", word[1]);
+ s += strprintf(" (Average %u)", word[1]);
break;
- // Power on time
- case 9:
- if (select==1){
+
+ case RAWFMT_RAW24_OPT_RAW8:
+ s = strprintf("%u", (unsigned)(rawvalue & 0x00ffffffULL));
+ if (raw[3] || raw[4] || raw[5])
+ s += strprintf(" (%d %d %d)", raw[5], raw[4], raw[3]);
+ break;
+
+ case RAWFMT_RAW24_DIV_RAW24:
+ s = strprintf("%u/%u",
+ (unsigned)(rawvalue >> 24), (unsigned)(rawvalue & 0x00ffffffULL));
+ break;
+
+ case RAWFMT_RAW24_DIV_RAW32:
+ s = strprintf("%u/%u",
+ (unsigned)(rawvalue >> 32), (unsigned)(rawvalue & 0xffffffffULL));
+ break;
+
+ case RAWFMT_MIN2HOUR:
+ {
// minutes
- int64_t tmp1=rawvalue/60;
- int64_t tmp2=rawvalue%60;
- out+=sprintf(out, "%"PRIu64"h+%02"PRIu64"m", tmp1, tmp2);
+ int64_t temp = word[0]+(word[1]<<16);
+ int64_t tmp1 = temp/60;
+ int64_t tmp2 = temp%60;
+ s = strprintf("%" PRIu64 "h+%02" PRIu64 "m", tmp1, tmp2);
+ if (word[2])
+ s += strprintf(" (%u)", word[2]);
}
- else if (select==3){
+ break;
+
+ case RAWFMT_SEC2HOUR:
+ {
// seconds
- int64_t hours=rawvalue/3600;
- int64_t minutes=(rawvalue-3600*hours)/60;
- int64_t seconds=rawvalue%60;
- out+=sprintf(out, "%"PRIu64"h+%02"PRIu64"m+%02"PRIu64"s", hours, minutes, seconds);
+ int64_t hours = rawvalue/3600;
+ int64_t minutes = (rawvalue-3600*hours)/60;
+ int64_t seconds = rawvalue%60;
+ s = strprintf("%" PRIu64 "h+%02" PRIu64 "m+%02" PRIu64 "s", hours, minutes, seconds);
}
- else if (select==4){
+ break;
+
+ case RAWFMT_HALFMIN2HOUR:
+ {
// 30-second counter
- int64_t tmp1=rawvalue/120;
- int64_t tmp2=(rawvalue-120*tmp1)/2;
- out+=sprintf(out, "%"PRIu64"h+%02"PRIu64"m", tmp1, tmp2);
+ int64_t hours = rawvalue/120;
+ int64_t minutes = (rawvalue-120*hours)/2;
+ s += strprintf("%" PRIu64 "h+%02" PRIu64 "m", hours, minutes);
}
- else
- // hours
- out+=sprintf(out, "%"PRIu64, rawvalue); //stored in hours
break;
- // Load unload cycles
- case 193:
- if (select==1){
- // loadunload
- long load =attribute->raw[0] + (attribute->raw[1]<<8) + (attribute->raw[2]<<16);
- long unload=attribute->raw[3] + (attribute->raw[4]<<8) + (attribute->raw[5]<<16);
- out+=sprintf(out, "%lu/%lu", load, unload);
+
+ case RAWFMT_MSEC24_HOUR32:
+ {
+ // hours + milliseconds
+ unsigned hours = (unsigned)(rawvalue & 0xffffffffULL);
+ unsigned milliseconds = (unsigned)(rawvalue >> 32);
+ unsigned seconds = milliseconds / 1000;
+ s = strprintf("%uh+%02um+%02u.%03us",
+ hours, seconds / 60, seconds % 60, milliseconds % 1000);
}
- else
- // associated
- out+=sprintf(out, "%"PRIu64, rawvalue);
break;
+
+ case RAWFMT_TEMPMINMAX:
// Temperature
- case 194:
- if (select==1){
- // ten times temperature in Celsius
- int deg=word[0]/10;
- int tenths=word[0]%10;
- out+=sprintf(out, "%d.%d", deg, tenths);
- }
- else if (select==2)
- // unknown attribute
- out+=sprintf(out, "%"PRIu64, rawvalue);
- else {
- out+=sprintf(out, "%d", word[0]);
- if (!(rawvalue==word[0])) {
- int min=word[1]<word[2]?word[1]:word[2];
- int max=word[1]>word[2]?word[1]:word[2];
- // The other bytes are in use. Try IBM's model
- out+=sprintf(out, " (Lifetime Min/Max %d/%d)", min, max);
+ {
+ // Search for possible min/max values
+ // [5][4][3][2][1][0] raw[]
+ // [ 2 ] [ 1 ] [ 0 ] word[]
+ // xx HH xx LL xx TT (Hitachi/HGST)
+ // xx LL xx HH xx TT (Kingston SSDs)
+ // 00 00 HH LL xx TT (Maxtor, Samsung, Seagate, Toshiba)
+ // 00 00 00 HH LL TT (WDC)
+ // CC CC HH LL xx TT (WDC, CCCC=over temperature count)
+ // (xx = 00/ff, possibly sign extension of lower byte)
+
+ int t = (signed char)raw[0];
+ int lo = 0, hi = 0;
+
+ int tformat;
+ int ctw0 = check_temp_word(word[0]);
+ if (!word[2]) {
+ if (!word[1] && ctw0)
+ // 00 00 00 00 xx TT
+ tformat = 0;
+ else if (ctw0 && check_temp_range(t, raw[2], raw[3], lo, hi))
+ // 00 00 HL LH xx TT
+ tformat = 1;
+ else if (!raw[3] && check_temp_range(t, raw[1], raw[2], lo, hi))
+ // 00 00 00 HL LH TT
+ tformat = 2;
+ else
+ tformat = -1;
+ }
+ else if (ctw0) {
+ if ( (ctw0 & check_temp_word(word[1]) & check_temp_word(word[2])) != 0x00
+ && check_temp_range(t, raw[2], raw[4], lo, hi) )
+ // xx HL xx LH xx TT
+ tformat = 3;
+ else if ( word[2] < 0x7fff
+ && check_temp_range(t, raw[2], raw[3], lo, hi)
+ && hi >= 40 )
+ // CC CC HL LH xx TT
+ tformat = 4;
+ else
+ tformat = -2;
+ }
+ else
+ tformat = -3;
+
+ switch (tformat) {
+ case 0:
+ s = strprintf("%d", t);
+ break;
+ case 1: case 2: case 3:
+ s = strprintf("%d (Min/Max %d/%d)", t, lo, hi);
+ break;
+ case 4:
+ s = strprintf("%d (Min/Max %d/%d #%d)", t, lo, hi, word[2]);
+ break;
+ default:
+ s = strprintf("%d (%d %d %d %d %d)", raw[0], raw[5], raw[4], raw[3], raw[2], raw[1]);
+ break;
}
}
break;
+
+ case RAWFMT_TEMP10X:
+ // ten times temperature in Celsius
+ s = strprintf("%d.%d", word[0]/10, word[0]%10);
+ break;
+
default:
- out+=sprintf(out, "%"PRIu64, rawvalue);
+ s = "?"; // Should not happen
+ break;
}
-
- // Return the full value
- return rawvalue;
-}
+ return s;
+}
-// Note some attribute names appear redundant because different
-// manufacturers use different attribute IDs for an attribute with the
-// same name. The variable val should contain a non-zero value if a particular
-// attributes has a non-default interpretation.
-void ataPrintSmartAttribName(char *out, unsigned char id, unsigned char *definitions){
- char *name;
- unsigned char val;
+// Attribute names shouldn't be longer than 23 chars, otherwise they break the
+// output of smartctl.
+static const char * get_default_attr_name(unsigned char id, int rpm)
+{
+ bool hdd = (rpm > 1), ssd = (rpm == 1);
- // If no data array, use default interpretations
- if (definitions)
- val=definitions[id];
- else
- val=0;
+ static const char Unknown_HDD_Attribute[] = "Unknown_HDD_Attribute";
+ static const char Unknown_SSD_Attribute[] = "Unknown_SSD_Attribute";
- switch (id){
-
+ switch (id) {
case 1:
- name="Raw_Read_Error_Rate";
- break;
+ return "Raw_Read_Error_Rate";
case 2:
- name="Throughput_Performance";
- break;
+ return "Throughput_Performance";
case 3:
- name="Spin_Up_Time";
- break;
+ return "Spin_Up_Time";
case 4:
- name="Start_Stop_Count";
- break;
+ return "Start_Stop_Count";
case 5:
- name="Reallocated_Sector_Ct";
- break;
+ return "Reallocated_Sector_Ct";
case 6:
- name="Read_Channel_Margin";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Read_Channel_Margin";
case 7:
- name="Seek_Error_Rate";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Seek_Error_Rate";
case 8:
- name="Seek_Time_Performance";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Seek_Time_Performance";
case 9:
- switch (val) {
- case 1:
- name="Power_On_Minutes";
- break;
- case 2:
- name="Temperature_Celsius";
- break;
- case 3:
- name="Power_On_Seconds";
- break;
- case 4:
- name="Power_On_Half_Minutes";
- break;
- default:
- name="Power_On_Hours";
- break;
- }
- break;
+ return "Power_On_Hours";
case 10:
- name="Spin_Retry_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Spin_Retry_Count";
case 11:
- name="Calibration_Retry_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Calibration_Retry_Count";
case 12:
- name="Power_Cycle_Count";
- break;
+ return "Power_Cycle_Count";
case 13:
- name="Read_Soft_Error_Rate";
- break;
+ return "Read_Soft_Error_Rate";
+ case 175:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Program_Fail_Count_Chip";
+ case 176:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Erase_Fail_Count_Chip";
+ case 177:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Wear_Leveling_Count";
+ case 178:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Used_Rsvd_Blk_Cnt_Chip";
+ case 179:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Used_Rsvd_Blk_Cnt_Tot";
+ case 180:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Unused_Rsvd_Blk_Cnt_Tot";
+ case 181:
+ return "Program_Fail_Cnt_Total";
+ case 182:
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Erase_Fail_Count_Total";
+ case 183:
+ return "Runtime_Bad_Block";
+ case 184:
+ return "End-to-End_Error";
+ case 187:
+ return "Reported_Uncorrect";
+ case 188:
+ return "Command_Timeout";
+ case 189:
+ if (ssd) return Unknown_SSD_Attribute;
+ return "High_Fly_Writes";
case 190:
// Western Digital uses this for temperature.
// It's identical to Attribute 194 except that it
// is typically 55C. So if this attribute has failed
// in the past, it indicates that the drive temp exceeded
// 55C sometime in the past.
- name="Temperature_Celsius";
- break;
+ return "Airflow_Temperature_Cel";
case 191:
- name="G-Sense_Error_Rate";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "G-Sense_Error_Rate";
case 192:
- switch (val) {
- case 1:
- // Fujitsu
- name="Emergency_Retract_Cycle_Ct";
- break;
- default:
- name="Power-Off_Retract_Count";
- break;
- }
- break;
+ return "Power-Off_Retract_Count";
case 193:
- name="Load_Cycle_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Load_Cycle_Count";
case 194:
- switch (val){
- case 1:
- // Samsung SV1204H with RK100-13 firmware
- name="Temperature_Celsius_x10";
- break;
- case 2:
- // for disks with no temperature Attribute
- name="Unknown_Attribute";
- break;
- default:
- name="Temperature_Celsius";
- break;
- }
- break;
+ return "Temperature_Celsius";
case 195:
- // Fujitsu name="ECC_On_The_Fly_Count";
- name="Hardware_ECC_Recovered";
- break;
+ // Fujitsu: "ECC_On_The_Fly_Count";
+ return "Hardware_ECC_Recovered";
case 196:
- name="Reallocated_Event_Count";
- break;
+ return "Reallocated_Event_Count";
case 197:
- name="Current_Pending_Sector";
- break;
+ return "Current_Pending_Sector";
case 198:
- switch (val){
- case 1:
- // Fujitsu
- name="Off-line_Scan_UNC_Sector_Ct";
- break;
- default:
- name="Offline_Uncorrectable";
- break;
- }
- break;
+ return "Offline_Uncorrectable";
case 199:
- name="UDMA_CRC_Error_Count";
- break;
+ return "UDMA_CRC_Error_Count";
case 200:
- switch (val) {
- case 1:
- // Fujitsu MHS2020AT
- name="Write_Error_Count";
- break;
- default:
- // Western Digital
- name="Multi_Zone_Error_Rate";
- break;
- }
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ // Western Digital
+ return "Multi_Zone_Error_Rate";
case 201:
- switch (val) {
- case 1:
- // Fujitsu
- name="Detected_TA_Count";
- break;
- default:
- name="Soft_Read_Error_Rate";
- break;
- }
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Soft_Read_Error_Rate";
case 202:
- // Fujitsu
- name="TA_Increase_Count";
- // Maxtor: Data Address Mark Errors
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ // Fujitsu: "TA_Increase_Count"
+ return "Data_Address_Mark_Errs";
case 203:
// Fujitsu
- name="Run_Out_Cancel";
+ return "Run_Out_Cancel";
// Maxtor: ECC Errors
- break;
case 204:
- // Fujitsu
- name="Shock_Count_Write_Opern";
- // Maxtor: Soft ECC Correction
- break;
+ // Fujitsu: "Shock_Count_Write_Opern"
+ return "Soft_ECC_Correction";
case 205:
- // Fujitsu
- name="Shock_Rate_Write_Opern";
- // Maxtor: Thermal Aspirates
- break;
+ // Fujitsu: "Shock_Rate_Write_Opern"
+ return "Thermal_Asperity_Rate";
case 206:
// Fujitsu
- name="Flying_Height";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Flying_Height";
case 207:
// Maxtor
- name="Spin_High_Current";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Spin_High_Current";
case 208:
// Maxtor
- name="Spin_Buzz";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Spin_Buzz";
case 209:
// Maxtor
- name="Offline_Seek_Performnce";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Offline_Seek_Performnce";
case 220:
- switch (val) {
- case 1:
- name="Temperature_Celsius";
- break;
- default:
- name="Disk_Shift";
- break;
- }
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Disk_Shift";
case 221:
- name="G-Sense_Error_Rate";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "G-Sense_Error_Rate";
case 222:
- name="Loaded_Hours";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Loaded_Hours";
case 223:
- name="Load_Retry_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Load_Retry_Count";
case 224:
- name="Load_Friction";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Load_Friction";
case 225:
- name="Load_Cycle_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Load_Cycle_Count";
case 226:
- name="Load-in_Time";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Load-in_Time";
case 227:
- name="Torq-amp_Count";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Torq-amp_Count";
case 228:
- name="Power-off_Retract_Count";
- break;
+ return "Power-off_Retract_Count";
case 230:
// seen in IBM DTPA-353750
- name="Head_Amplitude";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Head_Amplitude";
case 231:
- name="Temperature_Celsius";
- break;
+ return "Temperature_Celsius";
+ case 232:
+ // seen in Intel X25-E SSD
+ return "Available_Reservd_Space";
+ case 233:
+ // seen in Intel X25-E SSD
+ if (hdd) return Unknown_HDD_Attribute;
+ return "Media_Wearout_Indicator";
case 240:
- name="Head_Flying_Hours";
- break;
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Head_Flying_Hours";
+ case 241:
+ return "Total_LBAs_Written";
+ case 242:
+ return "Total_LBAs_Read";
case 250:
- name="Read_Error_Retry_Rate";
- break;
+ return "Read_Error_Retry_Rate";
+ case 254:
+ if (ssd) return Unknown_SSD_Attribute;
+ return "Free_Fall_Sensor";
default:
- name="Unknown_Attribute";
- break;
+ return "Unknown_Attribute";
}
- sprintf(out,"%3hu %s",(short int)id,name);
- return;
}
-// Returns raw value of Attribute with ID==id. This will be in the
-// range 0 to 2^48-1 inclusive. If the Attribute does not exist,
-// return -1.
-int64_t ATAReturnAttributeRawValue(unsigned char id, struct ata_smart_values *data) {
- int i;
+// Get attribute name
+std::string ata_get_smart_attr_name(unsigned char id, const ata_vendor_attr_defs & defs,
+ int rpm /* = 0 */)
+{
+ if (!defs[id].name.empty())
+ return defs[id].name;
+ else
+ return get_default_attr_name(id, rpm);
+}
- // valid Attribute IDs are in the range 1 to 255 inclusive.
- if (!id || !data)
+// Find attribute index for attribute id, -1 if not found.
+int ata_find_attr_index(unsigned char id, const ata_smart_values & smartval)
+{
+ if (!id)
return -1;
-
- // loop over Attributes to see if there is one with the desired ID
- for (i=0; i<NUMBER_ATA_SMART_ATTRIBUTES; i++) {
- struct ata_smart_attribute *ap = data->vendor_attributes + i;
- if (ap->id == id) {
- // we've found the desired Attribute. Return its value
- int64_t rawvalue=0;
- int j;
-
- for (j=0; j<6; j++) {
- // This looks a bit roundabout, but is necessary. Don't
- // succumb to the temptation to use raw[j]<<(8*j) since under
- // the normal rules this will be promoted to the native type.
- // On a 32 bit machine this might then overflow.
- int64_t temp;
- temp = ap->raw[j];
- temp <<= 8*j;
- rawvalue |= temp;
- } // loop over j
- return rawvalue;
- } // found desired Attribute
- } // loop over Attributes
-
- // fall-through: no such Attribute found
+ for (int i = 0; i < NUMBER_ATA_SMART_ATTRIBUTES; i++) {
+ if (smartval.vendor_attributes[i].id == id)
+ return i;
+ }
return -1;
}
// Return Temperature Attribute raw value selected according to possible
// non-default interpretations. If the Attribute does not exist, return 0
-unsigned char ATAReturnTemperatureValue(/*const*/ struct ata_smart_values *data, const unsigned char *defs){
- int i;
- for (i = 0; i < 3; i++) {
- static const unsigned char ids[3] = {194, 9, 220};
+unsigned char ata_return_temperature_value(const ata_smart_values * data, const ata_vendor_attr_defs & defs)
+{
+ for (int i = 0; i < 4; i++) {
+ static const unsigned char ids[4] = {194, 190, 9, 220};
unsigned char id = ids[i];
- unsigned char select = (defs ? defs[id] : 0);
- int64_t raw; unsigned temp;
- if (!( (id == 194 && select <= 1) // ! -v 194,unknown
- || (id == 9 && select == 2) // -v 9,temp
- || (id == 220 && select == 1))) // -v 220,temp
+ const ata_attr_raw_format format = defs[id].raw_format;
+ if (!( ((id == 194 || id == 190) && format == RAWFMT_DEFAULT)
+ || format == RAWFMT_TEMPMINMAX || format == RAWFMT_TEMP10X))
continue;
- raw = ATAReturnAttributeRawValue(id, data);
- if (raw < 0)
+ int idx = ata_find_attr_index(id, *data);
+ if (idx < 0)
continue;
- temp = (unsigned short)raw; // ignore possible min/max values in high words
- if (id == 194 && select == 1) // -v 194,10xCelsius
- temp = (temp+5) / 10;
- if (!(0 < temp && temp <= 255))
+ uint64_t raw = ata_get_attr_raw_value(data->vendor_attributes[idx], defs);
+ unsigned temp;
+ // ignore possible min/max values in high words
+ if (format == RAWFMT_TEMP10X) // -v N,temp10x
+ temp = ((unsigned short)raw + 5) / 10;
+ else
+ temp = (unsigned char)raw;
+ if (!(0 < temp && temp < 128))
continue;
return temp;
}
// No valid attribute found
return 0;
}
+
+
+// Read SCT Status
+int ataReadSCTStatus(ata_device * device, ata_sct_status_response * sts)
+{
+ // read SCT status via SMART log 0xe0
+ memset(sts, 0, sizeof(*sts));
+ if (smartcommandhandler(device, READ_LOG, 0xe0, (char *)sts)){
+ pout("Read SCT Status failed: %s\n", device->get_errmsg());
+ return -1;
+ }
+
+ // swap endian order if needed
+ if (isbigendian()){
+ swapx(&sts->format_version);
+ swapx(&sts->sct_version);
+ swapx(&sts->sct_spec);
+ swapx(&sts->ext_status_code);
+ swapx(&sts->action_code);
+ swapx(&sts->function_code);
+ swapx(&sts->over_limit_count);
+ swapx(&sts->under_limit_count);
+ }
+
+ // Check format version
+ if (!(sts->format_version == 2 || sts->format_version == 3)) {
+ pout("Unknown SCT Status format version %u, should be 2 or 3.\n", sts->format_version);
+ return -1;
+ }
+ return 0;
+}
+
+// Read SCT Temperature History Table
+int ataReadSCTTempHist(ata_device * device, ata_sct_temperature_history_table * tmh,
+ ata_sct_status_response * sts)
+{
+ // Initial SCT status must be provided by caller
+
+ // Do nothing if other SCT command is executing
+ if (sts->ext_status_code == 0xffff) {
+ pout("Another SCT command is executing, abort Read Data Table\n"
+ "(SCT ext_status_code 0x%04x, action_code=%u, function_code=%u)\n",
+ sts->ext_status_code, sts->action_code, sts->function_code);
+ return -1;
+ }
+
+ ata_sct_data_table_command cmd; memset(&cmd, 0, sizeof(cmd));
+ // CAUTION: DO NOT CHANGE THIS VALUE (SOME ACTION CODES MAY ERASE DISK)
+ cmd.action_code = 5; // Data table command
+ cmd.function_code = 1; // Read table
+ cmd.table_id = 2; // Temperature History Table
+
+ // swap endian order if needed
+ if (isbigendian()) {
+ swapx(&cmd.action_code);
+ swapx(&cmd.function_code);
+ swapx(&cmd.table_id);
+ }
+
+ // write command via SMART log page 0xe0
+ if (smartcommandhandler(device, WRITE_LOG, 0xe0, (char *)&cmd)){
+ pout("Write SCT Data Table failed: %s\n", device->get_errmsg());
+ return -1;
+ }
+
+ // read SCT data via SMART log page 0xe1
+ memset(tmh, 0, sizeof(*tmh));
+ if (smartcommandhandler(device, READ_LOG, 0xe1, (char *)tmh)){
+ pout("Read SCT Data Table failed: %s\n", device->get_errmsg());
+ return -1;
+ }
+
+ // re-read and check SCT status
+ if (ataReadSCTStatus(device, sts))
+ return -1;
+
+ if (!(sts->ext_status_code == 0 && sts->action_code == 5 && sts->function_code == 1)) {
+ pout("Unexpected SCT status 0x%04x (action_code=%u, function_code=%u)\n",
+ sts->ext_status_code, sts->action_code, sts->function_code);
+ return -1;
+ }
+
+ // swap endian order if needed
+ if (isbigendian()){
+ swapx(&tmh->format_version);
+ swapx(&tmh->sampling_period);
+ swapx(&tmh->interval);
+ swapx(&tmh->cb_index);
+ swapx(&tmh->cb_size);
+ }
+ return 0;
+}
+
+// Get/Set Write Cache Reordering
+int ataGetSetSCTWriteCacheReordering(ata_device * device, bool enable, bool persistent, bool set)
+{
+ // Check initial status
+ ata_sct_status_response sts;
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ // Do nothing if other SCT command is executing
+ if (sts.ext_status_code == 0xffff) {
+ pout("Another SCT command is executing, abort Feature Control\n"
+ "(SCT ext_status_code 0x%04x, action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+
+ ata_sct_feature_control_command cmd; memset(&cmd, 0, sizeof(cmd));
+ // CAUTION: DO NOT CHANGE THIS VALUE (SOME ACTION CODES MAY ERASE DISK)
+ cmd.action_code = 4; // Feature Control command
+ cmd.function_code = (set ? 1 : 2); // 1=Set, 2=Get
+ cmd.feature_code = 2; // Enable/Disable Write Cache Reordering
+ cmd.state = (enable ? 1 : 2); // 1 enable, 2 disable
+ cmd.option_flags = (persistent ? 0x01 : 0x00);
+
+ // swap endian order if needed
+ if (isbigendian()) {
+ swapx(&cmd.action_code);
+ swapx(&cmd.function_code);
+ swapx(&cmd.feature_code);
+ swapx(&cmd.state);
+ swapx(&cmd.option_flags);
+ }
+
+ // write command via SMART log page 0xe0
+ // TODO: Debug output
+ ata_cmd_in in;
+ in.in_regs.command = ATA_SMART_CMD;
+ in.in_regs.lba_high = SMART_CYL_HI; in.in_regs.lba_mid = SMART_CYL_LOW;
+ in.in_regs.features = ATA_SMART_WRITE_LOG_SECTOR;
+ in.in_regs.lba_low = 0xe0;
+ in.set_data_out(&cmd, 1);
+
+ if (!set)
+ // Time limit returned in ATA registers
+ in.out_needed.sector_count = in.out_needed.lba_low = true;
+
+ ata_cmd_out out;
+ if (!device->ata_pass_through(in, out)) {
+ pout("Write SCT (%cet) Feature Control Command failed: %s\n",
+ (!set ? 'G' : 'S'), device->get_errmsg());
+ return -1;
+ }
+ int state = out.out_regs.sector_count | (out.out_regs.lba_low << 8);
+
+ // re-read and check SCT status
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ if (!(sts.ext_status_code == 0 && sts.action_code == 4 && sts.function_code == (set ? 1 : 2))) {
+ pout("Unexpected SCT status 0x%04x (action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+ return state;
+}
+
+
+// Set SCT Temperature Logging Interval
+int ataSetSCTTempInterval(ata_device * device, unsigned interval, bool persistent)
+{
+ // Check initial status
+ ata_sct_status_response sts;
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ // Do nothing if other SCT command is executing
+ if (sts.ext_status_code == 0xffff) {
+ pout("Another SCT command is executing, abort Feature Control\n"
+ "(SCT ext_status_code 0x%04x, action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+
+ ata_sct_feature_control_command cmd; memset(&cmd, 0, sizeof(cmd));
+ // CAUTION: DO NOT CHANGE THIS VALUE (SOME ACTION CODES MAY ERASE DISK)
+ cmd.action_code = 4; // Feature Control command
+ cmd.function_code = 1; // Set state
+ cmd.feature_code = 3; // Temperature logging interval
+ cmd.state = interval;
+ cmd.option_flags = (persistent ? 0x01 : 0x00);
+
+ // swap endian order if needed
+ if (isbigendian()) {
+ swapx(&cmd.action_code);
+ swapx(&cmd.function_code);
+ swapx(&cmd.feature_code);
+ swapx(&cmd.state);
+ swapx(&cmd.option_flags);
+ }
+
+ // write command via SMART log page 0xe0
+ if (smartcommandhandler(device, WRITE_LOG, 0xe0, (char *)&cmd)){
+ pout("Write SCT Feature Control Command failed: %s\n", device->get_errmsg());
+ return -1;
+ }
+
+ // re-read and check SCT status
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ if (!(sts.ext_status_code == 0 && sts.action_code == 4 && sts.function_code == 1)) {
+ pout("Unexpected SCT status 0x%04x (action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+ return 0;
+}
+
+// Get/Set SCT Error Recovery Control
+static int ataGetSetSCTErrorRecoveryControltime(ata_device * device, unsigned type,
+ bool set, unsigned short & time_limit)
+{
+ // Check initial status
+ ata_sct_status_response sts;
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ // Do nothing if other SCT command is executing
+ if (sts.ext_status_code == 0xffff) {
+ pout("Another SCT command is executing, abort Error Recovery Control\n"
+ "(SCT ext_status_code 0x%04x, action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+
+ ata_sct_error_recovery_control_command cmd; memset(&cmd, 0, sizeof(cmd));
+ // CAUTION: DO NOT CHANGE THIS VALUE (SOME ACTION CODES MAY ERASE DISK)
+ cmd.action_code = 3; // Error Recovery Control command
+ cmd.function_code = (set ? 1 : 2); // 1=Set timer, 2=Get timer
+ cmd.selection_code = type; // 1=Read timer, 2=Write timer
+ if (set)
+ cmd.time_limit = time_limit;
+
+ // swap endian order if needed
+ if (isbigendian()) {
+ swapx(&cmd.action_code);
+ swapx(&cmd.function_code);
+ swapx(&cmd.selection_code);
+ swapx(&cmd.time_limit);
+ }
+
+ // write command via SMART log page 0xe0
+ // TODO: Debug output
+ ata_cmd_in in;
+ in.in_regs.command = ATA_SMART_CMD;
+ in.in_regs.lba_high = SMART_CYL_HI; in.in_regs.lba_mid = SMART_CYL_LOW;
+ in.in_regs.features = ATA_SMART_WRITE_LOG_SECTOR;
+ in.in_regs.lba_low = 0xe0;
+ in.set_data_out(&cmd, 1);
+
+ if (!set)
+ // Time limit returned in ATA registers
+ in.out_needed.sector_count = in.out_needed.lba_low = true;
+
+ ata_cmd_out out;
+ if (!device->ata_pass_through(in, out)) {
+ pout("Write SCT (%cet) Error Recovery Control Command failed: %s\n",
+ (!set ? 'G' : 'S'), device->get_errmsg());
+ return -1;
+ }
+
+ // re-read and check SCT status
+ if (ataReadSCTStatus(device, &sts))
+ return -1;
+
+ if (!(sts.ext_status_code == 0 && sts.action_code == 3 && sts.function_code == (set ? 1 : 2))) {
+ pout("Unexpected SCT status 0x%04x (action_code=%u, function_code=%u)\n",
+ sts.ext_status_code, sts.action_code, sts.function_code);
+ return -1;
+ }
+
+ if (!set) {
+ // Check whether registers are properly returned by ioctl()
+ if (!(out.out_regs.sector_count.is_set() && out.out_regs.lba_low.is_set())) {
+ // TODO: Output register support should be checked within each ata_pass_through()
+ // implementation before command is issued.
+ pout("SMART WRITE LOG does not return COUNT and LBA_LOW register\n");
+ return -1;
+ }
+ if ( out.out_regs.sector_count == in.in_regs.sector_count
+ && out.out_regs.lba_low == in.in_regs.lba_low ) {
+ // 0xe001 (5734.5s) - this is most likely a broken ATA pass-through implementation
+ pout("SMART WRITE LOG returns COUNT and LBA_LOW register unchanged\n");
+ return -1;
+ }
+
+ // Return value to caller
+ time_limit = out.out_regs.sector_count | (out.out_regs.lba_low << 8);
+ }
+
+ return 0;
+}
+
+// Get SCT Error Recovery Control
+int ataGetSCTErrorRecoveryControltime(ata_device * device, unsigned type, unsigned short & time_limit)
+{
+ return ataGetSetSCTErrorRecoveryControltime(device, type, false/*get*/, time_limit);
+}
+
+// Set SCT Error Recovery Control
+int ataSetSCTErrorRecoveryControltime(ata_device * device, unsigned type, unsigned short time_limit)
+{
+ return ataGetSetSCTErrorRecoveryControltime(device, type, true/*set*/, time_limit);
+}
+
+
+// Print one self-test log entry.
+// Returns:
+// -1: self-test failed
+// 1: extended self-test completed without error
+// 0: otherwise
+int ataPrintSmartSelfTestEntry(unsigned testnum, unsigned char test_type,
+ unsigned char test_status,
+ unsigned short timestamp,
+ uint64_t failing_lba,
+ bool print_error_only, bool & print_header)
+{
+ // Check status and type for return value
+ int retval = 0;
+ switch (test_status >> 4) {
+ case 0x0:
+ if ((test_type & 0x0f) == 0x02)
+ retval = 1; // extended self-test completed without error
+ break;
+ case 0x3: case 0x4:
+ case 0x5: case 0x6:
+ case 0x7: case 0x8:
+ retval = -1; // self-test failed
+ break;
+ }
+
+ if (retval >= 0 && print_error_only)
+ return retval;
+
+ std::string msgtest;
+ switch (test_type) {
+ case 0x00: msgtest = "Offline"; break;
+ case 0x01: msgtest = "Short offline"; break;
+ case 0x02: msgtest = "Extended offline"; break;
+ case 0x03: msgtest = "Conveyance offline"; break;
+ case 0x04: msgtest = "Selective offline"; break;
+ case 0x7f: msgtest = "Abort offline test"; break;
+ case 0x81: msgtest = "Short captive"; break;
+ case 0x82: msgtest = "Extended captive"; break;
+ case 0x83: msgtest = "Conveyance captive"; break;
+ case 0x84: msgtest = "Selective captive"; break;
+ default:
+ if ((0x40 <= test_type && test_type <= 0x7e) || 0x90 <= test_type)
+ msgtest = strprintf("Vendor (0x%02x)", test_type);
+ else
+ msgtest = strprintf("Reserved (0x%02x)", test_type);
+ }
+
+ std::string msgstat;
+ switch (test_status >> 4) {
+ case 0x0: msgstat = "Completed without error"; break;
+ case 0x1: msgstat = "Aborted by host"; break;
+ case 0x2: msgstat = "Interrupted (host reset)"; break;
+ case 0x3: msgstat = "Fatal or unknown error"; break;
+ case 0x4: msgstat = "Completed: unknown failure"; break;
+ case 0x5: msgstat = "Completed: electrical failure"; break;
+ case 0x6: msgstat = "Completed: servo/seek failure"; break;
+ case 0x7: msgstat = "Completed: read failure"; break;
+ case 0x8: msgstat = "Completed: handling damage??"; break;
+ case 0xf: msgstat = "Self-test routine in progress"; break;
+ default: msgstat = strprintf("Unknown status (0x%x)", test_status >> 4);
+ }
+
+ // Print header once
+ if (print_header) {
+ print_header = false;
+ pout("Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n");
+ }
+
+ char msglba[32];
+ if (retval < 0 && failing_lba < 0xffffffffffffULL)
+ snprintf(msglba, sizeof(msglba), "%" PRIu64, failing_lba);
+ else {
+ msglba[0] = '-'; msglba[1] = 0;
+ }
+
+ pout("#%2u %-19s %-29s %1d0%% %8u %s\n", testnum,
+ msgtest.c_str(), msgstat.c_str(), test_status & 0x0f, timestamp, msglba);
+
+ return retval;
+}
+
+// Print Smart self-test log, used by smartctl and smartd.
+// return value is:
+// bottom 8 bits: number of entries found where self-test showed an error
+// remaining bits: if nonzero, power on hours of last self-test where error was found
+int ataPrintSmartSelfTestlog(const ata_smart_selftestlog * data, bool allentries,
+ firmwarebug_defs firmwarebugs)
+{
+ if (allentries)
+ pout("SMART Self-test log structure revision number %d\n",(int)data->revnumber);
+ if (data->revnumber != 0x0001 && allentries && !firmwarebugs.is_set(BUG_SAMSUNG))
+ pout("Warning: ATA Specification requires self-test log structure revision number = 1\n");
+ if (data->mostrecenttest==0){
+ if (allentries)
+ pout("No self-tests have been logged. [To run self-tests, use: smartctl -t]\n");
+ return 0;
+ }
+
+ bool noheaderprinted = true;
+ int errcnt = 0, hours = 0, igncnt = 0;
+ int testno = 0, ext_ok_testno = -1;
+
+ // print log
+ for (int i = 20; i >= 0; i--) {
+ // log is a circular buffer
+ int j = (i+data->mostrecenttest)%21;
+ const ata_smart_selftestlog_struct * log = data->selftest_struct+j;
+
+ if (nonempty(log, sizeof(*log))) {
+ // count entry based on non-empty structures -- needed for
+ // Seagate only -- other vendors don't have blank entries 'in
+ // the middle'
+ testno++;
+
+ // T13/1321D revision 1c: (Data structure Rev #1)
+
+ //The failing LBA shall be the LBA of the uncorrectable sector
+ //that caused the test to fail. If the device encountered more
+ //than one uncorrectable sector during the test, this field
+ //shall indicate the LBA of the first uncorrectable sector
+ //encountered. If the test passed or the test failed for some
+ //reason other than an uncorrectable sector, the value of this
+ //field is undefined.
+
+ // This is true in ALL ATA-5 specs
+ uint64_t lba48 = (log->lbafirstfailure < 0xffffffff ? log->lbafirstfailure : 0xffffffffffffULL);
+
+ // Print entry
+ int state = ataPrintSmartSelfTestEntry(testno,
+ log->selftestnumber, log->selfteststatus,
+ log->timestamp, lba48, !allentries, noheaderprinted);
+
+ if (state < 0) {
+ // Self-test showed an error
+ if (ext_ok_testno < 0) {
+ errcnt++;
+
+ // keep track of time of most recent error
+ if (!hours)
+ hours = log->timestamp;
+ }
+ else
+ // Newer successful extended self-test exits
+ igncnt++;
+ }
+ else if (state > 0 && ext_ok_testno < 0) {
+ // Latest successful extended self-test
+ ext_ok_testno = testno;
+ }
+ }
+ }
+
+ if (igncnt)
+ pout("%d of %d failed self-tests are outdated by newer successful extended offline self-test #%2d\n",
+ igncnt, igncnt+errcnt, ext_ok_testno);
+
+ if (!allentries && !noheaderprinted)
+ pout("\n");
+
+ return ((hours << 8) | errcnt);
+}
+
+
+/////////////////////////////////////////////////////////////////////////////
+// Pseudo-device to parse "smartctl -r ataioctl,2 ..." output and simulate
+// an ATA device with same behaviour
+
+namespace {
+
+class parsed_ata_device
+: public /*implements*/ ata_device_with_command_set
+{
+public:
+ parsed_ata_device(smart_interface * intf, const char * dev_name);
+
+ virtual ~parsed_ata_device() throw();
+
+ virtual bool is_open() const;
+
+ virtual bool open();
+
+ virtual bool close();
+
+ virtual bool ata_identify_is_cached() const;
+
+protected:
+ virtual int ata_command_interface(smart_command_set command, int select, char * data);
+
+private:
+ // Table of parsed commands, return value, data
+ struct parsed_ata_command
+ {
+ smart_command_set command;
+ int select;
+ int retval, errval;
+ char * data;
+ };
+
+ enum { max_num_commands = 32 };
+ parsed_ata_command m_command_table[max_num_commands];
+
+ int m_num_commands;
+ int m_next_replay_command;
+ bool m_replay_out_of_sync;
+ bool m_ata_identify_is_cached;
+};
+
+static const char * nextline(const char * s, int & lineno)
+{
+ for (s += strcspn(s, "\r\n"); *s == '\r' || *s == '\n'; s++) {
+ if (*s == '\r' && s[1] == '\n')
+ s++;
+ lineno++;
+ }
+ return s;
+}
+
+static int name2command(const char * s)
+{
+ for (int i = 0; i < (int)(sizeof(commandstrings)/sizeof(commandstrings[0])); i++) {
+ if (!strcmp(s, commandstrings[i]))
+ return i;
+ }
+ return -1;
+}
+
+static bool matchcpy(char * dest, size_t size, const char * src, const regmatch_t & srcmatch)
+{
+ if (srcmatch.rm_so < 0)
+ return false;
+ size_t n = srcmatch.rm_eo - srcmatch.rm_so;
+ if (n >= size)
+ n = size-1;
+ memcpy(dest, src + srcmatch.rm_so, n);
+ dest[n] = 0;
+ return true;
+}
+
+static inline int matchtoi(const char * src, const regmatch_t & srcmatch, int defval)
+{
+ if (srcmatch.rm_so < 0)
+ return defval;
+ return atoi(src + srcmatch.rm_so);
+}
+
+parsed_ata_device::parsed_ata_device(smart_interface * intf, const char * dev_name)
+: smart_device(intf, dev_name, "ata", ""),
+ m_num_commands(0),
+ m_next_replay_command(0),
+ m_replay_out_of_sync(false),
+ m_ata_identify_is_cached(false)
+{
+ memset(m_command_table, 0, sizeof(m_command_table));
+}
+
+parsed_ata_device::~parsed_ata_device() throw()
+{
+ close();
+}
+
+bool parsed_ata_device::is_open() const
+{
+ return (m_num_commands > 0);
+}
+
+// Parse stdin and build command table
+bool parsed_ata_device::open()
+{
+ const char * pathname = get_dev_name();
+ if (strcmp(pathname, "-"))
+ return set_err(EINVAL);
+ pathname = "<stdin>";
+ // Fill buffer
+ char buffer[64*1024];
+ int size = 0;
+ while (size < (int)sizeof(buffer)) {
+ int nr = fread(buffer, 1, sizeof(buffer), stdin);
+ if (nr <= 0)
+ break;
+ size += nr;
+ }
+ if (size <= 0)
+ return set_err(ENOENT, "%s: Unexpected EOF", pathname);
+ if (size >= (int)sizeof(buffer))
+ return set_err(EIO, "%s: Buffer overflow", pathname);
+ buffer[size] = 0;
+
+ // Regex to match output from "-r ataioctl,2"
+ static const char pattern[] = "^"
+ "(" // (1
+ "REPORT-IOCTL: DeviceF?D?=[^ ]+ Command=([A-Z ]*[A-Z])" // (2)
+ "(" // (3
+ "( InputParameter=([0-9]+))?" // (4 (5))
+ "|"
+ "( returned (-?[0-9]+)( errno=([0-9]+)[^\r\n]*)?)" // (6 (7) (8 (9)))
+ ")" // )
+ "[\r\n]" // EOL match necessary to match optional parts above
+ "|"
+ "===== \\[([A-Z ]*[A-Z])\\] DATA START " // (10)
+ "|"
+ " *(En|Dis)abled status cached by OS, " // (11)
+ ")"; // )
+
+ // Compile regex
+ const regular_expression regex(pattern, REG_EXTENDED);
+
+ // Parse buffer
+ const char * errmsg = 0;
+ int i = -1, state = 0, lineno = 1;
+ for (const char * line = buffer; *line; line = nextline(line, lineno)) {
+ // Match line
+ if (!(line[0] == 'R' || line[0] == '=' || line[0] == ' '))
+ continue;
+ const int nmatch = 1+11;
+ regmatch_t match[nmatch];
+ if (!regex.execute(line, nmatch, match))
+ continue;
+
+ char cmdname[40];
+ if (matchcpy(cmdname, sizeof(cmdname), line, match[2])) { // "REPORT-IOCTL:... Command=%s ..."
+ int nc = name2command(cmdname);
+ if (nc < 0) {
+ errmsg = "Unknown ATA command name"; break;
+ }
+ if (match[7].rm_so < 0) { // "returned %d"
+ // Start of command
+ if (!(state == 0 || state == 2)) {
+ errmsg = "Missing REPORT-IOCTL result"; break;
+ }
+ if (++i >= max_num_commands) {
+ errmsg = "Too many ATA commands"; break;
+ }
+ m_command_table[i].command = (smart_command_set)nc;
+ m_command_table[i].select = matchtoi(line, match[5], 0); // "InputParameter=%d"
+ state = 1;
+ }
+ else {
+ // End of command
+ if (!(state == 1 && (int)m_command_table[i].command == nc)) {
+ errmsg = "Missing REPORT-IOCTL start"; break;
+ }
+ m_command_table[i].retval = matchtoi(line, match[7], -1); // "returned %d"
+ m_command_table[i].errval = matchtoi(line, match[9], 0); // "errno=%d"
+ state = 2;
+ }
+ }
+ else if (matchcpy(cmdname, sizeof(cmdname), line, match[10])) { // "===== [%s] DATA START "
+ // Start of sector hexdump
+ int nc = name2command(cmdname);
+ if (!(state == (nc == WRITE_LOG ? 1 : 2) && (int)m_command_table[i].command == nc)) {
+ errmsg = "Unexpected DATA START"; break;
+ }
+ line = nextline(line, lineno);
+ char * data = (char *)malloc(512);
+ unsigned j;
+ for (j = 0; j < 32; j++) {
+ unsigned b[16];
+ unsigned u1, u2; int n1 = -1;
+ if (!(sscanf(line, "%3u-%3u: "
+ "%2x %2x %2x %2x %2x %2x %2x %2x "
+ "%2x %2x %2x %2x %2x %2x %2x %2x%n",
+ &u1, &u2,
+ b+ 0, b+ 1, b+ 2, b+ 3, b+ 4, b+ 5, b+ 6, b+ 7,
+ b+ 8, b+ 9, b+10, b+11, b+12, b+13, b+14, b+15, &n1) == 18
+ && n1 >= 56 && u1 == j*16 && u2 == j*16+15))
+ break;
+ for (unsigned k = 0; k < 16; k++)
+ data[j*16+k] = b[k];
+ line = nextline(line, lineno);
+ }
+ if (j < 32) {
+ free(data);
+ errmsg = "Incomplete sector hex dump"; break;
+ }
+ m_command_table[i].data = data;
+ if (nc != WRITE_LOG)
+ state = 0;
+ }
+ else if (match[11].rm_so > 0) { // "(En|Dis)abled status cached by OS"
+ m_ata_identify_is_cached = true;
+ }
+ }
+
+ if (!(state == 0 || state == 2))
+ errmsg = "Missing REPORT-IOCTL result";
+
+ if (!errmsg && i < 0)
+ errmsg = "No information found";
+
+ m_num_commands = i+1;
+ m_next_replay_command = 0;
+ m_replay_out_of_sync = false;
+
+ if (errmsg) {
+ close();
+ return set_err(EIO, "%s(%d): Syntax error: %s", pathname, lineno, errmsg);
+ }
+ return true;
+}
+
+// Report warnings and free command table
+bool parsed_ata_device::close()
+{
+ if (m_replay_out_of_sync)
+ pout("REPLAY-IOCTL: Warning: commands replayed out of sync\n");
+ else if (m_next_replay_command != 0)
+ pout("REPLAY-IOCTL: Warning: %d command(s) not replayed\n", m_num_commands-m_next_replay_command);
+
+ for (int i = 0; i < m_num_commands; i++) {
+ if (m_command_table[i].data) {
+ free(m_command_table[i].data); m_command_table[i].data = 0;
+ }
+ }
+ m_num_commands = 0;
+ m_next_replay_command = 0;
+ m_replay_out_of_sync = false;
+ return true;
+}
+
+
+bool parsed_ata_device::ata_identify_is_cached() const
+{
+ return m_ata_identify_is_cached;
+}
+
+
+// Simulate ATA command from command table
+int parsed_ata_device::ata_command_interface(smart_command_set command, int select, char * data)
+{
+ // Find command, try round-robin if out of sync
+ int i = m_next_replay_command;
+ for (int j = 0; ; j++) {
+ if (j >= m_num_commands) {
+ pout("REPLAY-IOCTL: Warning: Command not found\n");
+ errno = ENOSYS;
+ return -1;
+ }
+ if (m_command_table[i].command == command && m_command_table[i].select == select)
+ break;
+ if (!m_replay_out_of_sync) {
+ m_replay_out_of_sync = true;
+ pout("REPLAY-IOCTL: Warning: Command #%d is out of sync\n", i+1);
+ }
+ if (++i >= m_num_commands)
+ i = 0;
+ }
+ m_next_replay_command = i;
+ if (++m_next_replay_command >= m_num_commands)
+ m_next_replay_command = 0;
+
+ // Return command data
+ switch (command) {
+ case IDENTIFY:
+ case PIDENTIFY:
+ case READ_VALUES:
+ case READ_THRESHOLDS:
+ case READ_LOG:
+ if (m_command_table[i].data)
+ memcpy(data, m_command_table[i].data, 512);
+ break;
+ case WRITE_LOG:
+ if (!(m_command_table[i].data && !memcmp(data, m_command_table[i].data, 512)))
+ pout("REPLAY-IOCTL: Warning: WRITE LOG data does not match\n");
+ break;
+ case CHECK_POWER_MODE:
+ data[0] = (char)0xff;
+ default:
+ break;
+ }
+
+ if (m_command_table[i].errval)
+ errno = m_command_table[i].errval;
+ return m_command_table[i].retval;
+}
+
+} // namespace
+
+ata_device * get_parsed_ata_device(smart_interface * intf, const char * dev_name)
+{
+ return new parsed_ata_device(intf, dev_name);
+}