/*
* ataidentify.cpp
*
- * Home page of code is: http://smartmontools.sourceforge.net
+ * Home page of code is: http://www.smartmontools.org
*
- * Copyright (C) 2012-13 Christian Franke <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2012-17 Christian Franke
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "config.h"
#include "ataidentify.h"
-const char * ataidentify_cpp_cvsid = "$Id: ataidentify.cpp 3851 2013-08-17 20:10:11Z chrfranke $"
+const char * ataidentify_cpp_cvsid = "$Id: ataidentify.cpp 4573 2017-10-29 15:13:58Z chrfranke $"
ATAIDENTIFY_H_CVSID;
#include "int64.h"
// Tables 16 and 18 of T13/1532D (ATA/ATAPI-7) Volume 1 Revision 4b, April 21, 2004
// Tables 29 and 39 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008
// Tables 50 and 61 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
-// Tables 51 and 56 of T13/2161-D (ACS-3) Revision 4g, February 27, 2013
+// Tables 45 and 50 of T13/2161-D (ACS-3) Revision 5, October 28, 2013
+// Table 55 of T13/BSR INCITS 529 (ACS-4) Revision 20, October 26, 2017 (ATAPI removed)
const char * const identify_descriptions[] = {
" 0 General configuration",
". 14 ATAPI: Must be set to 0",
". 13 ATAPI: Reserved",
". 12:8 ATAPI: Command set: 0x05 = CD/DVD",
- ". 7 Removable media device",
+ ". 7 Removable media device [OBS-8]",
". 6 ATA: Not removable controller and/or device [OBS-6]",
". 5:3 ATA: Vendor specific [RET-3]",
". 6:5 ATAPI: DRQ after PACKET cmd: 0x0 = 3ms, 0x2 = 50us",
". 10 IORDY may be disabled",
". 9 LBA supported",
". 8 DMA supported",
- ". 7:0 Vendor specific [RET-4]",
+ ". 7:2 Reserved", // ATA-3: Vendor specific, ATA-8: Retired
+ ". 1:0 Long Phy Sector Alignment Error reporting", // ACS-2
" 50 Capabilities",
". 15:14 Must be set to 0x1",
". 14 OVERWRITE EXT supported",
". 13 CRYPTO SCRAMBLE EXT supported",
". 12 Sanitize Device feature set supported",
- ". 11:9 Reserved",
- ". 8 Bits 7:0 are valid",
- ". 7:0 Current sectors per DRQ on READ/WRITE MULTIPLE",
+ ". 11 Cmds during sanitize as specified by this standard", // ACS-3
+ ". 10 SANITIZE ANTIFREEZE LOCK EXT supported", // ACS-3
+ ". 9 Reserved",
+ ". 8 Bits 7:0 are valid [OBS-ACS-4]",
+ ". 7:0 Current number of sectors per DRQ [OBS-ACS-4]",
" 60-61 User addressable sectors for 28-bit commands (DWord)",
" 62 Single Word DMA modes [OBS-3]",
". 5 Trimmed LBA range(s) returning zeroed data supported",
". 4 Device encrypts all user data",
". 3 Extended number of user addressable sectors supported",
- ". 2 All write cache is non-volatile",
- ". 1:0 Reserved",
+ ". 2 All write cache is non-volatile", // ACS-3
+ ". 1:0 Zoned Capabilities", // ACS-4
" 70 Reserved",
" 71-74 ATA: Reserved for IDENTIFY PACKET DEVICE",
". 0 Must be set to 0",
" 77 Serial ATA additional capabilities", // ACS-3
- ". 15:7 Reserved for Serial ATA",
+ ". 15:9 Reserved for Serial ATA",
+ ". 8 Power Disable feature always enabled", // ACS-4
+ ". 7 DevSleep to ReducedPwrState supported", // ACS-4
". 6 RECEIVE/SEND FPDMA QUEUED supported",
". 5 NCQ Queue Management supported",
". 4 NCQ Streaming supported",
". 0 Must be set to 0",
" 78 Serial ATA features supported",
- ". 15:8 Reserved for Serial ATA",
+ ". 15:13 Reserved for Serial ATA",
+ ". 12 Power Disable feature supported", // ACS-4
+ ". 11 Rebuild Assist feature set supported", // ACS-4
+ ". 10 Reserved for Serial ATA",
+ ". 9 Hybrid Information supported", // ACS-4
+ ". 8 Device Sleep feature supported", // ACS-4
". 7 NCQ Autosense supported", // ACS-3
". 6 Software Settings Preservation supported",
". 5 Hardware Feature Control supported", // ACS-3
". 0 Must be set to 0",
" 79 Serial ATA features enabled",
- ". 15:8 Reserved for Serial ATA",
+ ". 15:12 Reserved for Serial ATA",
+ ". 11 Rebuild Assist feature set enabled", // ACS-4
+ ". 10 Power Disable feature enabled", // ACS-4
+ ". 9 Hybrid Information enabled", // ACS-4
+ ". 8 Device Sleep feature enabled", // ACS-4
". 7 Automatic Partial to Slumber transitions enabled", // ACS-3
". 6 Software Settings Preservation enabled",
". 5 Hardware Feature Control enabled", // ACS-3
". 0 Must be set to 0",
" 80 Major version number",
- ". 15:11 Reserved",
+ ". 15:12 Reserved",
+ ". 11 ACS-4 supported",
". 10 ACS-3 supported",
". 9 ACS-2 supported",
". 8 ATA8-ACS supported",
- ". 7 ATA/ATAPI-7 supported",
- ". 6 ATA/ATAPI-6 supported",
- ". 5 ATA/ATAPI-5 supported",
+ ". 7 ATA/ATAPI-7 supported [OBS-ACS-4]",
+ ". 6 ATA/ATAPI-6 supported [OBS-ACS-4]",
+ ". 5 ATA/ATAPI-5 supported [OBS-ACS-4]",
". 4 ATA/ATAPI-4 supported [OBS-8]",
". 3 ATA-3 supported [OBS-7]",
". 2 ATA-2 supported [OBS-6]",
". 10 48-bit Address feature set supported",
". 9 AAM feature set supported [OBS-ACS-2]",
". 8 SET MAX security extension supported [OBS-ACS-3]",
- ". 7 Reserved for Address Offset Reserved Area Boot Method",
+ ". 7 Reserved for Addr Offset Resvd Area Boot [OBS-ACS-3]",
". 6 SET FEATURES subcommand required to spin-up",
". 5 PUIS feature set supported",
". 4 Removable Media Status Notification supported [OBS-8]",
". 10 URG bit for WRITE STREAM (DMA) EXT supported [OBS-8]",
". 9 URG bit for READ STREAM (DMA) EXT supported [OBS-8]",
". 8 64-bit World Wide Name supported",
- ". 7 WRITE DMA QUEUED FUA EXT supported",
+ ". 7 WRITE DMA QUEUED FUA EXT supported [OBS-ACS-2]",
". 6 WRITE DMA/MULTIPLE FUA EXT supported",
". 5 GPL feature set supported",
- ". 4 Streaming feature set supported [OBS-ACS-3]",
+ ". 4 Streaming feature set supported",
". 3 Media Card Pass Through Command supported [OBS-ACS-2]",
- ". 2 Media serial number supported", // ACS-3 r3 or later: Reserved
+ ". 2 Media serial number supported [RES-ACS-3]",
". 1 SMART self-test supported",
". 0 SMART error logging supported",
". 10 48-bit Address features set supported",
". 9 AAM feature set enabled [OBS-ACS-2]",
". 8 SET MAX security extension enabled [OBS-ACS-3]",
- ". 7 Reserved for Address Offset Reserved Area Boot Method",
+ ". 7 Reserved for Addr Offset Resvd Area Boot [OBS-ACS-3]",
". 6 SET FEATURES subcommand required to spin-up",
". 5 PUIS feature set enabled",
". 4 Removable Media Status Notification enabled [OBS-8]",
". 0 Ultra DMA mode 0 supported",
" 89 SECURITY ERASE UNIT time",
+ ". 15 Bits 14:8 of value are valid", // ACS-3
+ ". 14:0 SECURITY ERASE UNIT time value", // value*2 minutes
+
" 90 ENHANCED SECURITY ERASE UNIT time",
+ ". 15 Bits 14:8 of value are valid", // ACS-3
+ ". 14:0 ENHANCED SECURITY ERASE UNIT time value", // value*2 minutes
+
" 91 Current APM level",
- " 92 Master password revision code",
+ ". 15:8 Reserved", // ACS-3
+ ". 7:0 Current APM level value",
+
+ " 92 Master Password Identifier", // ATA-7: Master Password Revision Code
" 93 Hardware reset result (PATA)",
". 15:14 Must be set to 0x1",
". 3:0 2^X logical sectors per physical sector",
"107 Inter-seek delay for ISO 7779 acoustic testing",
- "108-111 64-bit World Wide Name",
- "112-115 Reserved for a 128-bit World Wide Name",
+ "108-111 World Wide Name",
+ "112-115 Reserved", // ATA-7: Reserved for world wide name extension to 128 bits
"116 Reserved for TLC [OBS-ACS-3]",
"117-118 Logical sector size (DWord)",
"168 Form factor",
". 15:4 Reserved",
- ". 3:0 Nominal form factor: -, 5.25, 3.5, 2.5, 1.8, <1.8",
+ ". 3:0 Nominal form factor: -, 5.25, 3.5, 2.5, 1.8, ...", // <1.8, ACS-4: mSATA, M.2, ...
- "169 Data Set Management support",
+ "169 DATA SET MANAGEMENT command support",
". 15:1 Reserved",
". 0 Trim bit in DATA SET MANAGEMENT command supported",
"176-205 Current media serial number (String)",
"206 SCT Command Transport",
- ". 15:12 Vendor Specific",
+ ". 15:12 Vendor specific",
". 11:8 Reserved",
". 7 Reserved for Serial ATA",
". 6 Reserved",
". 1 SCT Read/Write Long supported [OBS-ACS-2]",
". 0 SCT Command Transport supported",
- "207-208 Reserved for CE-ATA",
+ "207-208 Reserved", // ATA-8: Reserved for CE-ATA
"209 Alignment of logical sectors",
". 15:14 Must be set to 0x1",
"221 Reserved",
"222 Transport major version number",
- ". 15:12 Transport type: 0x0 = Parallel, 0x1 = Serial",
- ". 11:7 Reserved | Reserved",
- ". 6 Reserved | SATA 3.1",
- ". 5 Reserved | SATA 3.0",
+ ". 15:12 Transport: 0x0 = Parallel, 0x1 = Serial, 0xe = PCIe", // PCIe: ACS-4
+ ". 11:9 Reserved | Reserved",
+ ". 8 Reserved | SATA 3.3", // ACS-4
+ ". 7 Reserved | SATA 3.2", // ACS-4
+ ". 6 Reserved | SATA 3.1", // ACS-3
+ ". 5 Reserved | SATA 3.0", // ACS-2
". 4 Reserved | SATA 2.6",
". 3 Reserved | SATA 2.5",
". 2 Reserved | SATA II: Extensions",
if (bit >= 0) {
int b;
if (bit2 >= 0)
- b = (w >> bit2) & ~(~0 << (bit-bit2+1));
+ b = (w >> bit2) & ~(~0U << (bit-bit2+1));
else
b = (w >> bit) & 1;