* Home page of code is: http://smartmontools.sourceforge.net
*
* Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2008-13 Christian Franke <smartmontools-support@lists.sourceforge.net>
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
*
* This program is free software; you can redistribute it and/or modify
* any later version.
*
* You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * (for example COPYING); If not, see <http://www.gnu.org/licenses/>.
*
* This code was originally developed as a Senior Thesis by Michael Cornwell
* at the Concurrent Systems Laboratory (now part of the Storage Systems
#include "int64.h"
#include "atacmdnames.h"
#include "atacmds.h"
+#include "ataidentify.h"
#include "dev_interface.h"
#include "ataprint.h"
#include "smartctl.h"
#include "utility.h"
#include "knowndrives.h"
-const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3539 2012-05-01 19:57:02Z chrfranke $"
+const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3831 2013-07-20 14:25:56Z chrfranke $"
ATAPRINT_H_CVSID;
/* For the given Command Register (CR) and Features Register (FR), attempts
* to construct a string that describes the contents of the Status
- * Register (ST) and Error Register (ER). The caller passes the string
- * buffer and the return value is a pointer to this string. If the
- * meanings of the flags of the error register are not known for the given
- * command then it returns NULL.
+ * Register (ST) and Error Register (ER). If the meanings of the flags of
+ * the error register are not known for the given command then it returns an
+ * empty string.
*
* The meanings of the flags of the error register for all commands are
* described in the ATA spec and could all be supported here in theory.
* should probably be redesigned.
*/
-static const char * construct_st_er_desc(
- char * s,
+static std::string format_st_er_desc(
unsigned char CR, unsigned char FR,
unsigned char ST, unsigned char ER,
unsigned short SC,
for (i = 0; i < 8; i++)
error_flag[i] = NULL;
+ std::string str;
+
switch (CR) {
case 0x10: // RECALIBRATE
error_flag[2] = abrt;
error_flag[2] = abrt;
break;
default:
- return NULL;
+ return str; // ""
break;
}
break;
error_flag[2] = abrt;
break;
default:
- return NULL;
+ return str; // ""
break;
}
break;
error_flag[2] = abrt;
break;
default:
- return NULL;
+ return str; // ""
}
- s[0] = '\0';
-
/* We ignore any status flags other than Device Fault and Error */
if (uses_device_fault && (ST & (1 << 5))) {
- strcat(s, "Device Fault");
+ str = "Device Fault";
if (ST & 1) // Error flag
- strcat(s, "; ");
+ str += "; ";
}
if (ST & 1) { // Error flag
int count = 0;
- strcat(s, "Error: ");
+ str += "Error: ";
for (i = 7; i >= 0; i--)
if ((ER & (1 << i)) && (error_flag[i])) {
if (count++ > 0)
- strcat(s, ", ");
- strcat(s, error_flag[i]);
+ str += ", ";
+ str += error_flag[i];
}
}
// If the error was a READ or WRITE error, print the Logical Block
// Address (LBA) at which the read or write failed.
if (print_lba) {
- char tmp[128];
// print number of sectors, if known, and append to print string
- if (print_sector) {
- snprintf(tmp, 128, " %d sectors", print_sector);
- strcat(s, tmp);
- }
+ if (print_sector)
+ str += strprintf(" %d sectors", print_sector);
if (lba28_regs) {
unsigned lba;
lba <<= 8;
// bits 0-7: SN
lba |= lba28_regs->sector_number;
- snprintf(tmp, 128, " at LBA = 0x%08x = %u", lba, lba);
- strcat(s, tmp);
+ str += strprintf(" at LBA = 0x%08x = %u", lba, lba);
}
else if (lba48_regs) {
// This assumes that upper LBA registers are 0 for 28-bit commands
lba48 |= lba48_regs->lba_mid_register;
lba48 <<= 8;
lba48 |= lba48_regs->lba_low_register;
- snprintf(tmp, 128, " at LBA = 0x%08"PRIx64" = %"PRIu64, lba48, lba48);
- strcat(s, tmp);
+ str += strprintf(" at LBA = 0x%08"PRIx64" = %"PRIu64, lba48, lba48);
}
}
- return s;
+ return str;
}
-static inline const char * construct_st_er_desc(char * s,
+static inline std::string format_st_er_desc(
const ata_smart_errorlog_struct * data)
{
- return construct_st_er_desc(s,
+ return format_st_er_desc(
data->commands[4].commandreg,
data->commands[4].featuresreg,
data->error_struct.status,
&data->error_struct, (const ata_smart_exterrlog_error *)0);
}
-static inline const char * construct_st_er_desc(char * s,
+static inline std::string format_st_er_desc(
const ata_smart_exterrlog_error_log * data)
{
- return construct_st_er_desc(s,
+ return format_st_er_desc(
data->commands[4].command_register,
data->commands[4].features_register,
data->error.status_register,
(const ata_smart_errorlog_error_struct *)0, &data->error);
}
+
+static int find_msb(unsigned short word)
+{
+ for (int bit = 15; bit >= 0; bit--)
+ if (word & (1 << bit))
+ return bit;
+ return -1;
+}
+
+static const char * get_ata_major_version(const ata_identify_device * drive)
+{
+ switch (find_msb(drive->major_rev_num)) {
+ case 10: return "ACS-3";
+ case 9: return "ACS-2";
+ case 8: return "ATA8-ACS";
+ case 7: return "ATA/ATAPI-7";
+ case 6: return "ATA/ATAPI-6";
+ case 5: return "ATA/ATAPI-5";
+ case 4: return "ATA/ATAPI-4";
+ case 3: return "ATA-3";
+ case 2: return "ATA-2";
+ case 1: return "ATA-1";
+ default: return 0;
+ }
+}
+
+static const char * get_ata_minor_version(const ata_identify_device * drive)
+{
+ switch (drive->minor_rev_num) {
+ case 0x0001: return "ATA-1 X3T9.2/781D prior to revision 4";
+ case 0x0002: return "ATA-1 published, ANSI X3.221-1994";
+ case 0x0003: return "ATA-1 X3T9.2/781D revision 4";
+ case 0x0004: return "ATA-2 published, ANSI X3.279-1996";
+ case 0x0005: return "ATA-2 X3T10/948D prior to revision 2k";
+ case 0x0006: return "ATA-3 X3T10/2008D revision 1";
+ case 0x0007: return "ATA-2 X3T10/948D revision 2k";
+ case 0x0008: return "ATA-3 X3T10/2008D revision 0";
+ case 0x0009: return "ATA-2 X3T10/948D revision 3";
+ case 0x000a: return "ATA-3 published, ANSI X3.298-1997";
+ case 0x000b: return "ATA-3 X3T10/2008D revision 6"; // 1st ATA-3 revision with SMART
+ case 0x000c: return "ATA-3 X3T13/2008D revision 7 and 7a";
+ case 0x000d: return "ATA/ATAPI-4 X3T13/1153D revision 6";
+ case 0x000e: return "ATA/ATAPI-4 T13/1153D revision 13";
+ case 0x000f: return "ATA/ATAPI-4 X3T13/1153D revision 7";
+ case 0x0010: return "ATA/ATAPI-4 T13/1153D revision 18";
+ case 0x0011: return "ATA/ATAPI-4 T13/1153D revision 15";
+ case 0x0012: return "ATA/ATAPI-4 published, ANSI NCITS 317-1998";
+ case 0x0013: return "ATA/ATAPI-5 T13/1321D revision 3";
+ case 0x0014: return "ATA/ATAPI-4 T13/1153D revision 14";
+ case 0x0015: return "ATA/ATAPI-5 T13/1321D revision 1";
+ case 0x0016: return "ATA/ATAPI-5 published, ANSI NCITS 340-2000";
+ case 0x0017: return "ATA/ATAPI-4 T13/1153D revision 17";
+ case 0x0018: return "ATA/ATAPI-6 T13/1410D revision 0";
+ case 0x0019: return "ATA/ATAPI-6 T13/1410D revision 3a";
+ case 0x001a: return "ATA/ATAPI-7 T13/1532D revision 1";
+ case 0x001b: return "ATA/ATAPI-6 T13/1410D revision 2";
+ case 0x001c: return "ATA/ATAPI-6 T13/1410D revision 1";
+ case 0x001d: return "ATA/ATAPI-7 published, ANSI INCITS 397-2005";
+ case 0x001e: return "ATA/ATAPI-7 T13/1532D revision 0";
+ case 0x001f: return "ACS-3 T13/2161-D revision 3b";
+
+ case 0x0021: return "ATA/ATAPI-7 T13/1532D revision 4a";
+ case 0x0022: return "ATA/ATAPI-6 published, ANSI INCITS 361-2002";
+
+ case 0x0027: return "ATA8-ACS T13/1699-D revision 3c";
+ case 0x0028: return "ATA8-ACS T13/1699-D revision 6";
+ case 0x0029: return "ATA8-ACS T13/1699-D revision 4";
+
+ case 0x0031: return "ACS-2 T13/2015-D revision 2";
+
+ case 0x0033: return "ATA8-ACS T13/1699-D revision 3e";
+
+ case 0x0039: return "ATA8-ACS T13/1699-D revision 4c";
+
+ case 0x0042: return "ATA8-ACS T13/1699-D revision 3f";
+
+ case 0x0052: return "ATA8-ACS T13/1699-D revision 3b";
+
+ case 0x0107: return "ATA8-ACS T13/1699-D revision 2d";
+
+ case 0x0110: return "ACS-2 T13/2015-D revision 3";
+
+ default: return 0;
+ }
+}
+
+static const char * get_sata_version(const ata_identify_device * drive)
+{
+ unsigned short word222 = drive->words088_255[222-88];
+ if ((word222 & 0xf000) != 0x1000)
+ return 0;
+ switch (find_msb(word222 & 0x0fff)) {
+ default: return "SATA >3.1";
+ case 6: return "SATA 3.1";
+ case 5: return "SATA 3.0";
+ case 4: return "SATA 2.6";
+ case 3: return "SATA 2.5";
+ case 2: return "SATA II Ext";
+ case 1: return "SATA 1.0a";
+ case 0: return "ATA8-AST";
+ case -1: return 0;
+ }
+}
+
+static const char * get_sata_speed(int level)
+{
+ if (level <= 0)
+ return 0;
+ switch (level) {
+ default: return ">6.0 Gb/s";
+ case 3: return "6.0 Gb/s";
+ case 2: return "3.0 Gb/s";
+ case 1: return "1.5 Gb/s";
+ }
+}
+
+static const char * get_sata_maxspeed(const ata_identify_device * drive)
+{
+ unsigned short word076 = drive->words047_079[76-47];
+ if (word076 & 0x0001)
+ return 0;
+ return get_sata_speed(find_msb(word076 & 0x00fe));
+}
+
+static const char * get_sata_curspeed(const ata_identify_device * drive)
+{
+ unsigned short word077 = drive->words047_079[77-47];
+ if (word077 & 0x0001)
+ return 0;
+ return get_sata_speed((word077 >> 1) & 0x7);
+}
+
+
static void print_drive_info(const ata_identify_device * drive,
- const ata_size_info & sizes,
+ const ata_size_info & sizes, int rpm,
const drive_settings * dbentry)
{
// format drive information (with byte swapping as needed)
int naa = ata_get_wwn(drive, oui, unique_id);
if (naa >= 0)
pout("LU WWN Device Id: %x %06x %09"PRIx64"\n", naa, oui, unique_id);
+
+ // Additional Product Identifier (OEM Id) string in words 170-173
+ // (e08130r1, added in ACS-2 Revision 1, December 17, 2008)
+ if (0x2020 <= drive->words088_255[170-88] && drive->words088_255[170-88] <= 0x7e7e) {
+ char add[8+1];
+ ata_format_id_string(add, (const unsigned char *)(drive->words088_255+170-88), sizeof(add)-1);
+ if (add[0])
+ pout("Add. Product Id: %s\n", add);
+ }
}
pout("Firmware Version: %s\n", infofound(firmware));
}
}
+ // Print nominal media rotation rate if reported
+ if (rpm) {
+ if (rpm == 1)
+ pout("Rotation Rate: Solid State Device\n");
+ else if (rpm > 1)
+ pout("Rotation Rate: %d rpm\n", rpm);
+ else
+ pout("Rotation Rate: Unknown (0x%04x)\n", -rpm);
+ }
+
// See if drive is recognized
pout("Device is: %s\n", !dbentry ?
"Not in smartctl database [for details use: -P showall]":
"In smartctl database [for details use: -P show]");
- // now get ATA version info
- const char *description; unsigned short minorrev;
- int version = ataVersionInfo(&description, drive, &minorrev);
-
- // SMART Support was first added into the ATA/ATAPI-3 Standard with
- // Revision 3 of the document, July 25, 1995. Look at the "Document
- // Status" revision commands at the beginning of
- // http://www.t13.org/Documents/UploadedDocuments/project/d2008r7b-ATA-3.pdf
- // to see this. So it's not enough to check if we are ATA-3.
- // Version=-3 indicates ATA-3 BEFORE Revision 3.
- // Version=0 indicates that no info is found. This may happen if
- // the OS provides only part of the IDENTIFY data.
-
- std::string majorstr, minorstr;
- if (version) {
- if (version <= 8) {
- majorstr = strprintf("%d", abs(version));
- if (description)
- minorstr = description;
- else if (!minorrev)
- minorstr = "Exact ATA specification draft version not indicated";
- else
- minorstr = strprintf("Not recognized. Minor revision code: 0x%04x", minorrev);
+ // Print ATA version
+ std::string ataver;
+ if ( (drive->major_rev_num != 0x0000 && drive->major_rev_num != 0xffff)
+ || (drive->minor_rev_num != 0x0000 && drive->minor_rev_num != 0xffff)) {
+ const char * majorver = get_ata_major_version(drive);
+ const char * minorver = get_ata_minor_version(drive);
+
+ if (majorver && minorver && str_starts_with(minorver, majorver)) {
+ // Major and minor strings match, print minor string only
+ ataver = minorver;
}
else {
- // Bit 9 in word 80 of ATA IDENTIFY data does not mean "ATA-9" but "ACS-2"
- // TODO: handle this in ataVersionInfo()
- majorstr = "8";
- if (description)
- minorstr = description;
- else if (!minorrev)
- minorstr = strprintf("ACS-%d (revision not indicated)", version-9+2);
+ if (majorver)
+ ataver = majorver;
else
- minorstr = strprintf("ACS-%d (unknown minor revision code: 0x%04x)", version-9+2, minorrev);
+ ataver = strprintf("Unknown(0x%04x)", drive->major_rev_num);
+
+ if (minorver)
+ ataver += strprintf(", %s", minorver);
+ else if (drive->minor_rev_num != 0x0000 && drive->minor_rev_num != 0xffff)
+ ataver += strprintf(" (unknown minor revision code: 0x%04x)", drive->minor_rev_num);
+ else
+ ataver += " (minor revision not indicated)";
}
}
+ pout("ATA Version is: %s\n", infofound(ataver.c_str()));
- pout("ATA Version is: %s\n", infofound(majorstr.c_str()));
- pout("ATA Standard is: %s\n", infofound(minorstr.c_str()));
+ // If SATA drive print SATA version and speed
+ const char * sataver = get_sata_version(drive);
+ if (sataver) {
+ const char * maxspeed = get_sata_maxspeed(drive);
+ const char * curspeed = get_sata_curspeed(drive);
+ pout("SATA Version is: %s%s%s%s%s%s\n", sataver,
+ (maxspeed ? ", " : ""), (maxspeed ? maxspeed : ""),
+ (curspeed ? " (current: " : ""), (curspeed ? curspeed : ""),
+ (curspeed ? ")" : ""));
+ }
// print current time and date and timezone
char timedatetz[DATEANDEPOCHLEN]; dateandtimezone(timedatetz);
// Print warning message, if there is one
if (dbentry && *dbentry->warningmsg)
pout("\n==> WARNING: %s\n\n", dbentry->warningmsg);
-
- if (!version || version >= 3)
- return;
-
- pout("SMART is only available in ATA Version 3 Revision 3 or greater.\n");
- pout("We will try to proceed in spite of this.\n");
}
static const char *OfflineDataCollectionStatus(unsigned char status_byte)
}
static void PrintSmartSelfExecStatus(const ata_smart_values * data,
- unsigned char fix_firmwarebug)
+ firmwarebug_defs firmwarebugs)
{
pout("Self-test execution status: ");
pout("damage.\n");
break;
case 15:
- if (fix_firmwarebug == FIX_SAMSUNG3 && data->self_test_exec_status == 0xf0) {
+ if (firmwarebugs.is_set(BUG_SAMSUNG3) && data->self_test_exec_status == 0xf0) {
pout("(%4d)\tThe previous self-test routine completed\n\t\t\t\t\t",
(int)data->self_test_exec_status);
pout("with unknown result or self-test in\n\t\t\t\t\t");
// onlyfailed=2: ones that are failed, or have failed with or without prefailure bit set
static void PrintSmartAttribWithThres(const ata_smart_values * data,
const ata_smart_thresholds_pvt * thresholds,
- const ata_vendor_attr_defs & defs,
+ const ata_vendor_attr_defs & defs, int rpm,
int onlyfailed, unsigned char format)
{
bool brief = !!(format & ata_print_options::FMT_BRIEF);
// Print line for each valid attribute
std::string idstr = (!hexid ? strprintf("%3d", attr.id)
: strprintf("0x%02x", attr.id));
- std::string attrname = ata_get_smart_attr_name(attr.id, defs);
+ std::string attrname = ata_get_smart_attr_name(attr.id, defs, rpm);
std::string rawstr = ata_format_attr_raw_value(attr, defs);
if (!brief)
static void PrintGeneralSmartValues(const ata_smart_values *data, const ata_identify_device *drive,
- unsigned char fix_firmwarebug)
+ firmwarebug_defs firmwarebugs)
{
pout("General SMART Values:\n");
PrintSmartOfflineStatus(data);
if (isSupportSelfTest(data)){
- PrintSmartSelfExecStatus(data, fix_firmwarebug);
+ PrintSmartSelfExecStatus(data, firmwarebugs);
}
PrintSmartTotalTimeCompleteOffline(data);
}
// Get name of log.
-// Table A.2 of T13/2161-D Revision 2 (ACS-3), February 21, 2012.
+// Table A.2 of T13/2161-D (ACS-3) Revision 4, September 4, 2012
static const char * GetLogName(unsigned logaddr)
{
switch (logaddr) {
case 0x02: return "Comprehensive SMART error log";
case 0x03: return "Ext. Comprehensive SMART error log";
case 0x04: return "Device Statistics log";
- case 0x05: return "Reserved for the CFA"; // ACS-2
+ case 0x05: return "Reserved for CFA"; // ACS-2
case 0x06: return "SMART self-test log";
case 0x07: return "Extended self-test log";
case 0x08: return "Power Conditions log"; // ACS-2
case 0x09: return "Selective self-test log";
+ case 0x0a: return "Device Statistics Notification"; // ACS-3
+ case 0x0b: return "Reserved for CFA"; // ACS-3
+
case 0x0d: return "LPS Mis-alignment log"; // ACS-2
+
case 0x10: return "NCQ Command Error log";
case 0x11: return "SATA Phy Event Counters";
case 0x12: return "SATA NCQ Queue Management log"; // ACS-3
case 0x14:
case 0x15:
case 0x16: return "Reserved for Serial ATA";
+
case 0x19: return "LBA Status log"; // ACS-3
- case 0x20: return "Streaming performance log"; // Obsolete
+
+ case 0x20: return "Streaming performance log [OBS-8]";
case 0x21: return "Write stream error log";
case 0x22: return "Read stream error log";
- case 0x23: return "Delayed sector log"; // Obsolete
+ case 0x23: return "Delayed sector log [OBS-8]";
case 0x24: return "Current Device Internal Status Data log"; // ACS-3
case 0x25: return "Saved Device Internal Status Data log"; // ACS-3
+
case 0x30: return "IDENTIFY DEVICE data log"; // ACS-3
+
case 0xe0: return "SCT Command/Status";
case 0xe1: return "SCT Data Transfer";
default:
/*NOTREACHED*/
}
+// Get log access permissions
+static const char * get_log_rw(unsigned logaddr)
+{
+ if ( ( logaddr <= 0x08)
+ || (0x0d == logaddr)
+ || (0x10 <= logaddr && logaddr <= 0x13)
+ || (0x19 == logaddr)
+ || (0x20 <= logaddr && logaddr <= 0x25)
+ || (0x30 == logaddr))
+ return "R/O";
+
+ if ( (0x09 <= logaddr && logaddr <= 0x0a)
+ || (0x80 <= logaddr && logaddr <= 0x9f)
+ || (0xe0 <= logaddr && logaddr <= 0xe1))
+ return "R/W";
+
+ if (0xa0 <= logaddr && logaddr <= 0xdf)
+ return "VS"; // Vendor specific
+
+ return "-"; // Unknown/Reserved
+}
+
+// Init a fake log directory, assume that standard logs are supported
+const ata_smart_log_directory * fake_logdir(ata_smart_log_directory * logdir,
+ const ata_print_options & options)
+{
+ memset(logdir, 0, sizeof(*logdir));
+ logdir->logversion = 255;
+ logdir->entry[0x01-1].numsectors = 1;
+ logdir->entry[0x03-1].numsectors = (options.smart_ext_error_log + (4-1)) / 4;
+ logdir->entry[0x04-1].numsectors = 8;
+ logdir->entry[0x06-1].numsectors = 1;
+ logdir->entry[0x07-1].numsectors = (options.smart_ext_selftest_log + (19-1)) / 19;
+ logdir->entry[0x09-1].numsectors = 1;
+ logdir->entry[0x11-1].numsectors = 1;
+ return logdir;
+}
+
// Print SMART and/or GP Log Directory
static void PrintLogDirectories(const ata_smart_log_directory * gplogdir,
const ata_smart_log_directory * smartlogdir)
(gplogdir ? " " : ""), smartlogdir->logversion,
(smartlogdir->logversion==1 ? " [multi-sector log support]" : ""));
+ pout("Address Access R/W Size Description\n");
+
for (unsigned i = 0; i <= 0xff; i++) {
// Get number of sectors
unsigned smart_numsect = GetNumLogSectors(smartlogdir, i, false);
if (!(smart_numsect || gp_numsect))
continue; // Log does not exist
+ const char * acc; unsigned size;
+ if (smart_numsect == gp_numsect) {
+ acc = "GPL,SL"; size = gp_numsect;
+ }
+ else if (!smart_numsect) {
+ acc = "GPL"; size = gp_numsect;
+ }
+ else if (!gp_numsect) {
+ acc = " SL"; size = smart_numsect;
+ }
+ else {
+ acc = 0; size = 0;
+ }
+
+ unsigned i2 = i;
+ if (acc && ((0x80 <= i && i < 0x9f) || (0xa0 <= i && i < 0xdf))) {
+ // Find range of Host/Device vendor specific logs with same size
+ unsigned imax = (i < 0x9f ? 0x9f : 0xdf);
+ for (unsigned j = i+1; j <= imax; j++) {
+ unsigned sn = GetNumLogSectors(smartlogdir, j, false);
+ unsigned gn = GetNumLogSectors(gplogdir , j, true );
+
+ if (!(sn == smart_numsect && gn == gp_numsect))
+ break;
+ i2 = j;
+ }
+ }
+
const char * name = GetLogName(i);
+ const char * rw = get_log_rw(i);
- // Print name and length of log.
- // If both SMART and GP exist, print separate entries if length differ.
- if (smart_numsect == gp_numsect)
- pout( "GP/S Log at address 0x%02x has %4d sectors [%s]\n", i, smart_numsect, name);
+ if (i2 > i) {
+ pout("0x%02x-0x%02x %-6s %-3s %5u %s\n", i, i2, acc, rw, size, name);
+ i = i2;
+ }
+ else if (acc)
+ pout( "0x%02x %-6s %-3s %5u %s\n", i, acc, rw, size, name);
else {
- if (gp_numsect)
- pout("GP %sLog at address 0x%02x has %4d sectors [%s]\n", (smartlogdir?" ":""),
- i, gp_numsect, name);
- if (smart_numsect)
- pout("SMART Log at address 0x%02x has %4d sectors [%s]\n", i, smart_numsect, name);
+ // GPL and SL support different sizes
+ pout( "0x%02x %-6s %-3s %5u %s\n", i, "GPL", rw, gp_numsect, name);
+ pout( "0x%02x %-6s %-3s %5u %s\n", i, "SL", rw, smart_numsect, name);
}
}
pout("\n");
}
else {
// Value not known (yet)
- strcpy(valstr, "-");
+ valstr[0] = '-'; valstr[1] = 0;
}
pout("%3d 0x%03x %d%c %15s%c %s\n",
{
// Read list of supported pages from page 0
unsigned char page_0[512] = {0, };
- if (!ataReadLogExt(device, 0x04, 0, 0, page_0, 1))
+ if (!ataReadLogExt(device, 0x04, 0, 0, page_0, 1)) {
+ pout("Read Device Statistics page 0 failed\n\n");
return false;
+ }
unsigned char nentries = page_0[8];
if (!(page_0[2] == 0 && nentries > 0)) {
- pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n", page_0[2], nentries);
+ pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n\n", page_0[2], nentries);
return false;
}
for (i = 0; i < pages.size(); i++) {
int page = pages[i];
unsigned char page_n[512] = {0, };
- if (!ataReadLogExt(device, 0x04, 0, page, page_n, 1))
+ if (!ataReadLogExt(device, 0x04, 0, page, page_n, 1)) {
+ pout("Read Device Statistics page %d failed\n\n", page);
return false;
+ }
print_device_statistics_page(page_n, page, need_trailer);
}
pout("\n");
}
+// Format milliseconds from error log entry as "DAYS+H:M:S.MSEC"
+static std::string format_milliseconds(unsigned msec)
+{
+ unsigned days = msec / 86400000U;
+ msec -= days * 86400000U;
+ unsigned hours = msec / 3600000U;
+ msec -= hours * 3600000U;
+ unsigned min = msec / 60000U;
+ msec -= min * 60000U;
+ unsigned sec = msec / 1000U;
+ msec -= sec * 1000U;
+
+ std::string str;
+ if (days)
+ str = strprintf("%2ud+", days);
+ str += strprintf("%02u:%02u:%02u.%03u", hours, min, sec, msec);
+ return str;
+}
+
// Get description for 'state' value from SMART Error Logs
static const char * get_error_log_state_desc(unsigned state)
{
// returns number of errors
static int PrintSmartErrorlog(const ata_smart_errorlog *data,
- unsigned char fix_firmwarebug)
+ firmwarebug_defs firmwarebugs)
{
pout("SMART Error Log Version: %d\n", (int)data->revnumber);
}
// Some internal consistency checking of the data structures
- if ((data->ata_error_count-data->error_log_pointer)%5 && fix_firmwarebug != FIX_SAMSUNG2) {
+ if ((data->ata_error_count-data->error_log_pointer) % 5 && !firmwarebugs.is_set(BUG_SAMSUNG2)) {
pout("Warning: ATA error count %d inconsistent with error log pointer %d\n\n",
data->ata_error_count,data->error_log_pointer);
}
(int)summary->drive_head);
// Add a description of the contents of the status and error registers
// if possible
- char descbuf[256];
- const char * st_er_desc = construct_st_er_desc(descbuf, elog);
- if (st_er_desc)
- pout(" %s", st_er_desc);
+ std::string st_er_desc = format_st_er_desc(elog);
+ if (!st_er_desc.empty())
+ pout(" %s", st_er_desc.c_str());
pout("\n\n");
pout(" Commands leading to the command that caused the error were:\n"
" CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name\n"
// Spec says: unused data command structures shall be zero filled
if (nonempty(thiscommand, sizeof(*thiscommand))) {
- char timestring[32];
-
- // Convert integer milliseconds to a text-format string
- MsecToText(thiscommand->timestamp, timestring);
-
pout(" %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n",
(int)thiscommand->commandreg,
(int)thiscommand->featuresreg,
(int)thiscommand->cylinder_high,
(int)thiscommand->drive_head,
(int)thiscommand->devicecontrolreg,
- timestring,
+ format_milliseconds(thiscommand->timestamp).c_str(),
look_up_ata_command(thiscommand->commandreg, thiscommand->featuresreg));
}
}
// Add a description of the contents of the status and error registers
// if possible
- char descbuf[256];
- const char * st_er_desc = construct_st_er_desc(descbuf, &entry);
- if (st_er_desc)
- pout(" %s", st_er_desc);
+ std::string st_er_desc = format_st_er_desc(&entry);
+ if (!st_er_desc.empty())
+ pout(" %s", st_er_desc.c_str());
pout("\n\n");
// Print command history
continue;
// Print registers, timestamp and ATA command name
- char timestring[32];
- MsecToText(cmd.timestamp, timestring);
-
pout(" %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %16s %s\n",
cmd.command_register,
cmd.features_register_hi,
cmd.lba_low_register,
cmd.device_register,
cmd.device_control_register,
- timestring,
+ format_milliseconds(cmd.timestamp).c_str(),
look_up_ata_command(cmd.command_register, cmd.features_register));
}
pout("\n");
}
// Format SCT Temperature value
-static const char * sct_ptemp(signed char x, char * buf)
+static const char * sct_ptemp(signed char x, char (& buf)[20])
{
if (x == -128 /*0x80 = unknown*/)
- strcpy(buf, " ?");
- else
- sprintf(buf, "%2d", x);
+ return " ?";
+ snprintf(buf, sizeof(buf), "%2d", x);
return buf;
}
-static const char * sct_pbar(int x, char * buf)
+static const char * sct_pbar(int x, char (& buf)[64])
{
if (x <= 19)
x = 0;
// Print SCT Temperature History Table
static int ataPrintSCTTempHist(const ata_sct_temperature_history_table * tmh)
{
- char buf1[20], buf2[80];
- pout("SCT Temperature History Version: %u\n", tmh->format_version);
+ char buf1[20], buf2[20], buf3[64];
+ pout("SCT Temperature History Version: %u%s\n", tmh->format_version,
+ (tmh->format_version != 2 ? " (Unknown, should be 2)" : ""));
pout("Temperature Sampling Period: %u minute%s\n",
tmh->sampling_period, (tmh->sampling_period==1?"":"s"));
pout("Temperature Logging Interval: %u minute%s\n",
pout("Min/Max Temperature Limit: %s/%s Celsius\n",
sct_ptemp(tmh->under_limit, buf1), sct_ptemp(tmh->over_limit, buf2));
pout("Temperature History Size (Index): %u (%u)\n", tmh->cb_size, tmh->cb_index);
+
if (!(0 < tmh->cb_size && tmh->cb_size <= sizeof(tmh->cb) && tmh->cb_index < tmh->cb_size)) {
- pout("Error invalid Temperature History Size or Index\n");
+ if (!tmh->cb_size)
+ pout("Temperature History is empty\n");
+ else
+ pout("Invalid Temperature History Size or Index\n");
return 0;
}
// TODO: Don't print times < boot time
strftime(date, sizeof(date), "%Y-%m-%d %H:%M", localtime(&t));
pout(" %3u %s %s %s\n", i, date,
- sct_ptemp(tmh->cb[i], buf1), sct_pbar(tmh->cb[i], buf2));
+ sct_ptemp(tmh->cb[i], buf1), sct_pbar(tmh->cb[i], buf3));
}
else if (n == n1+1) {
pout(" ... ..(%3u skipped). .. %s\n",
- n2-n1-2, sct_pbar(tmh->cb[i], buf2));
+ n2-n1-2, sct_pbar(tmh->cb[i], buf3));
}
t += interval * 60; i = (i+1) % tmh->cb_size; n++;
}
int powermode = ataCheckPowerMode(device);
switch (powermode) {
case -1:
- if (device->get_errno() == ENOSYS) {
+ if (device->is_syscall_unsup()) {
pout("CHECK POWER MODE not implemented, ignoring -n option\n"); break;
}
powername = "SLEEP"; powerlimit = 2;
options.gp_logdir
|| options.smart_ext_error_log
|| options.smart_ext_selftest_log
- || options.sataphy
|| options.devstat_all_pages
|| options.devstat_ssd_page
|| !options.devstat_pages.empty()
|| options.sct_temp_int
|| options.sct_erc_get
|| options.sct_erc_set
+ || options.sct_wcache_reorder_get
+ || options.sct_wcache_reorder_set
);
// Exit if no further options specified
- if (!( options.drive_info || need_smart_support
- || need_smart_logdir || need_gp_logdir
- || need_sct_support || options.get_set_used)) {
+ if (!( options.drive_info || options.show_presets
+ || need_smart_support || need_smart_logdir
+ || need_gp_logdir || need_sct_support
+ || options.sataphy
+ || options.identify_word_level >= 0
+ || options.get_set_used )) {
if (powername)
pout("Device is in %s mode\n", powername);
else
// Start by getting Drive ID information. We need this, to know if SMART is supported.
int returnval = 0;
ata_identify_device drive; memset(&drive, 0, sizeof(drive));
+ unsigned char raw_drive[sizeof(drive)]; memset(&raw_drive, 0, sizeof(raw_drive));
+
device->clear_err();
- int retid = ata_read_identity(device, &drive, options.fix_swapped_id);
+ int retid = ata_read_identity(device, &drive, options.fix_swapped_id, raw_drive);
if (retid < 0) {
- pout("Smartctl: Device Read Identity Failed: %s\n\n",
+ pout("Read Device Identity failed: %s\n\n",
(device->get_errno() ? device->get_errmsg() : "Unknown error"));
failuretest(MANDATORY_CMD, returnval|=FAILID);
}
else if (!nonempty(&drive, sizeof(drive))) {
- pout("Smartctl: Device Read Identity Failed: empty IDENTIFY data\n\n");
+ pout("Read Device Identity failed: empty IDENTIFY data\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILID);
}
// Use preset vendor attribute options unless user has requested otherwise.
ata_vendor_attr_defs attribute_defs = options.attribute_defs;
- unsigned char fix_firmwarebug = options.fix_firmwarebug;
+ firmwarebug_defs firmwarebugs = options.firmwarebugs;
const drive_settings * dbentry = 0;
if (!options.ignore_presets)
dbentry = lookup_drive_apply_presets(&drive, attribute_defs,
- fix_firmwarebug);
+ firmwarebugs);
- // Get capacity and sector sizes
+ // Get capacity, sector sizes and rotation rate
ata_size_info sizes;
ata_get_size_info(&drive, sizes);
+ int rpm = ata_get_rotation_rate(&drive);
+
+ // Print ATA IDENTIFY info if requested
+ if (options.identify_word_level >= 0) {
+ pout("=== ATA IDENTIFY DATA ===\n");
+ // Pass raw data without endianness adjustments
+ ata_print_identify_data(raw_drive, (options.identify_word_level > 0), options.identify_bit_level);
+ }
// Print most drive identity information if requested
if (options.drive_info) {
pout("=== START OF INFORMATION SECTION ===\n");
- print_drive_info(&drive, sizes, dbentry);
+ print_drive_info(&drive, sizes, rpm, dbentry);
}
// Check and print SMART support and state
if (options.get_security)
print_ata_security_status("ATA Security is: ", drive.words088_255[128-88]);
+ // Check if SCT commands available
+ bool sct_ok = false;
+ if (need_sct_support) {
+ if (!isSCTCapable(&drive)) {
+ failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
+ }
+ else
+ sct_ok = true;
+ }
+
+ // Print write cache reordering status
+ if (sct_ok && options.sct_wcache_reorder_get) {
+ int wcache_reorder=ataGetSetSCTWriteCacheReordering(device,
+ false /* enable */, false /* persistent */, false /*set*/);
+ pout("Wt Cache Reorder: ");
+ switch(wcache_reorder) {
+ case 0: /* not defined in standard but returned on some drives if not set */
+ pout("Unknown"); break;
+ case 1:
+ pout("Enabled"); break;
+ case 2:
+ pout("Disabled"); break;
+ default: /* error? */
+ pout("N/A"); break;
+ }
+ pout("\n");
+ }
+ if (!sct_ok && options.sct_wcache_reorder_get) {
+ pout("Wt Cache Reorder: Unavailable\n");
+ }
+
// Print remaining drive info
if (options.drive_info) {
// Print the (now possibly changed) power mode if available
// START OF THE ENABLE/DISABLE SECTION OF THE CODE
if ( options.smart_disable || options.smart_enable
|| options.smart_auto_save_disable || options.smart_auto_save_enable
- || options.smart_auto_offl_disable || options.smart_auto_offl_enable)
+ || options.smart_auto_offl_disable || options.smart_auto_offl_enable
+ || options.set_aam || options.set_apm || options.set_lookahead
+ || options.set_wcache || options.set_security_freeze || options.set_standby
+ || options.sct_wcache_reorder_set)
pout("=== START OF ENABLE/DISABLE COMMANDS SECTION ===\n");
// Enable/Disable AAM
pout("Write cache %sabled\n", (enable ? "en" : "dis"));
}
+ // Enable/Disable write cache reordering
+ if (sct_ok && options.sct_wcache_reorder_set) {
+ bool enable = (options.sct_wcache_reorder_set > 0);
+
+ int wcache_reorder=ataGetSetSCTWriteCacheReordering(device,
+ enable, false /* persistent */, true /*set*/);
+
+ if (wcache_reorder < 0) {
+ pout("Write cache reordering %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("Write cache reordering %sabled\n", (enable ? "en" : "dis"));
+ }
+
// Freeze ATA security
if (options.set_security_freeze) {
if (!ata_nodata_command(device, ATA_SECURITY_FREEZE_LOCK)) {
// Enable/Disable SMART commands
if (options.smart_enable) {
if (ataEnableSmart(device)) {
- pout("Smartctl: SMART Enable Failed.\n\n");
+ pout("SMART Enable failed: %s\n\n", device->get_errmsg());
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else {
// Turn off SMART on device
if (options.smart_disable) {
if (ataDisableSmart(device)) {
- pout( "Smartctl: SMART Disable Failed.\n\n");
+ pout("SMART Disable failed: %s\n\n", device->get_errmsg());
failuretest(MANDATORY_CMD,returnval|=FAILSMART);
}
}
// Exit if SMART is disabled but must be enabled to proceed
- if (options.smart_disable || (smart_enabled <= 0 && need_smart_enabled)) {
+ if (options.smart_disable || (smart_enabled <= 0 && need_smart_enabled && !is_permissive())) {
pout("SMART Disabled. Use option -s with argument 'on' to enable it.\n");
+ if (!options.smart_disable)
+ pout("(override with '-T permissive' option)\n");
return returnval;
}
// Enable/Disable Auto-save attributes
if (options.smart_auto_save_enable) {
if (ataEnableAutoSave(device)){
- pout( "Smartctl: SMART Enable Attribute Autosave Failed.\n\n");
+ pout("SMART Enable Attribute Autosave failed: %s\n\n", device->get_errmsg());
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else
if (options.smart_auto_save_disable) {
if (ataDisableAutoSave(device)){
- pout( "Smartctl: SMART Disable Attribute Autosave Failed.\n\n");
+ pout("SMART Disable Attribute Autosave failed: %s\n\n", device->get_errmsg());
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
else
if (need_smart_val) {
if (ataReadSmartValues(device, &smartval)) {
- pout("Smartctl: SMART Read Values failed.\n\n");
+ pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
if (options.smart_check_status || options.smart_vendor_attrib) {
if (ataReadSmartThresholds(device, &smartthres)){
- pout("Smartctl: SMART Read Thresholds failed.\n\n");
+ pout("Read SMART Thresholds failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
bool needupdate = false;
if (options.smart_auto_offl_enable) {
if (!isSupportAutomaticTimer(&smartval)){
- pout("Warning: device does not support SMART Automatic Timers.\n\n");
+ pout("SMART Automatic Timers not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
needupdate = smart_val_ok;
if (ataEnableAutoOffline(device)){
- pout( "Smartctl: SMART Enable Automatic Offline Failed.\n\n");
+ pout("SMART Enable Automatic Offline failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
if (options.smart_auto_offl_disable) {
if (!isSupportAutomaticTimer(&smartval)){
- pout("Warning: device does not support SMART Automatic Timers.\n\n");
+ pout("SMART Automatic Timers not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
needupdate = smart_val_ok;
if (ataDisableAutoOffline(device)){
- pout("Smartctl: SMART Disable Automatic Offline Failed.\n\n");
+ pout("SMART Disable Automatic Offline failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
}
if (needupdate && ataReadSmartValues(device, &smartval)){
- pout("Smartctl: SMART Read Values failed.\n\n");
+ pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
smart_val_ok = false;
}
// all this for a newline!
if ( options.smart_disable || options.smart_enable
|| options.smart_auto_save_disable || options.smart_auto_save_enable
- || options.smart_auto_offl_disable || options.smart_auto_offl_enable)
+ || options.smart_auto_offl_disable || options.smart_auto_offl_enable
+ || options.set_aam || options.set_apm || options.set_lookahead
+ || options.set_wcache || options.set_security_freeze || options.set_standby
+ || options.sct_wcache_reorder_set)
pout("\n");
// START OF READ-ONLY OPTIONS APART FROM -V and -i
else {
print_on();
pout("Please note the following marginal Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 2, options.output_format);
}
returnval|=FAILAGE;
}
else {
print_on();
pout("Failed Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 1, options.output_format);
}
}
else
else {
print_on();
pout("Failed Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 1, options.output_format);
}
}
else {
else {
print_on();
pout("Please note the following marginal Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm, 2, options.output_format);
}
returnval|=FAILAGE;
}
// Print general SMART values
if (smart_val_ok && options.smart_general_values)
- PrintGeneralSmartValues(&smartval, &drive, fix_firmwarebug);
+ PrintGeneralSmartValues(&smartval, &drive, firmwarebugs);
// Print vendor-specific attributes
if (smart_val_ok && options.smart_vendor_attrib) {
print_on();
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs,
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, rpm,
(printing_is_switchable ? 2 : 0), options.output_format);
print_off();
}
// Read SMART Log directory
if (need_smart_logdir) {
- if (ataReadLogDirectory(device, &smartlogdir_buf, false)) {
- pout("Read SMART Log Directory failed.\n\n");
+ if (firmwarebugs.is_set(BUG_NOLOGDIR))
+ smartlogdir = fake_logdir(&smartlogdir_buf, options);
+ else if (ataReadLogDirectory(device, &smartlogdir_buf, false)) {
+ pout("Read SMART Log Directory failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
// Read GP Log directory
if (need_gp_logdir) {
- if (ataReadLogDirectory(device, &gplogdir_buf, true)) {
- pout("Read GP Log Directory failed.\n\n");
+ if (firmwarebugs.is_set(BUG_NOLOGDIR))
+ gplogdir = fake_logdir(&gplogdir_buf, options);
+ else if (ataReadLogDirectory(device, &gplogdir_buf, true)) {
+ pout("Read GP Log Directory failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else
}
// Print log directories
- if ((options.gp_logdir && gplogdir) || (options.smart_logdir && smartlogdir))
- PrintLogDirectories(gplogdir, smartlogdir);
+ if ((options.gp_logdir && gplogdir) || (options.smart_logdir && smartlogdir)) {
+ if (firmwarebugs.is_set(BUG_NOLOGDIR))
+ pout("Log Directories not read due to '-F nologdir' option\n\n");
+ else
+ PrintLogDirectories(gplogdir, smartlogdir);
+ }
// Print log pages
for (i = 0; i < options.log_requests.size(); i++) {
bool ok = false;
unsigned nsectors = GetNumLogSectors(gplogdir, 0x03, true);
if (!nsectors)
- pout("SMART Extended Comprehensive Error Log (GP Log 0x03) not supported\n");
+ pout("SMART Extended Comprehensive Error Log (GP Log 0x03) not supported\n\n");
else if (nsectors >= 256)
- pout("SMART Extended Comprehensive Error Log size %u not supported\n", nsectors);
+ pout("SMART Extended Comprehensive Error Log size %u not supported\n\n", nsectors);
else {
raw_buffer log_03_buf(nsectors * 512);
ata_smart_exterrlog * log_03 = (ata_smart_exterrlog *)log_03_buf.data();
- if (!ataReadExtErrorLog(device, log_03, nsectors))
+ if (!ataReadExtErrorLog(device, log_03, nsectors, firmwarebugs)) {
+ pout("Read SMART Extended Comprehensive Error Log failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
+ }
else {
if (PrintSmartExtErrorLog(log_03, nsectors, options.smart_ext_error_log))
returnval |= FAILERR;
if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x01, false))
|| (!smartlogdir && isSmartErrorLogCapable(&smartval, &drive) )
|| is_permissive() )) {
- pout("SMART Error Log not supported\n");
+ pout("SMART Error Log not supported\n\n");
}
else {
ata_smart_errorlog smarterror; memset(&smarterror, 0, sizeof(smarterror));
- if (ataReadErrorLog(device, &smarterror, fix_firmwarebug)) {
- pout("Smartctl: SMART Error Log Read Failed\n");
+ if (ataReadErrorLog(device, &smarterror, firmwarebugs)) {
+ pout("Read SMART Error Log failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
// quiet mode is turned on inside PrintSmartErrorLog()
- if (PrintSmartErrorlog(&smarterror, fix_firmwarebug))
+ if (PrintSmartErrorlog(&smarterror, firmwarebugs))
returnval|=FAILERR;
print_off();
}
bool ok = false;
unsigned nsectors = GetNumLogSectors(gplogdir, 0x07, true);
if (!nsectors)
- pout("SMART Extended Self-test Log (GP Log 0x07) not supported\n");
+ pout("SMART Extended Self-test Log (GP Log 0x07) not supported\n\n");
else if (nsectors >= 256)
- pout("SMART Extended Self-test Log size %u not supported\n", nsectors);
+ pout("SMART Extended Self-test Log size %u not supported\n\n", nsectors);
else {
raw_buffer log_07_buf(nsectors * 512);
ata_smart_extselftestlog * log_07 = (ata_smart_extselftestlog *)log_07_buf.data();
- if (!ataReadExtSelfTestLog(device, log_07, nsectors))
+ if (!ataReadExtSelfTestLog(device, log_07, nsectors)) {
+ pout("Read SMART Extended Self-test Log failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
+ }
else {
if (PrintSmartExtSelfTestLog(log_07, nsectors, options.smart_ext_selftest_log))
returnval |= FAILLOG;
if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x06, false))
|| (!smartlogdir && isSmartTestLogCapable(&smartval, &drive) )
|| is_permissive() )) {
- pout("SMART Self-test Log not supported\n");
+ pout("SMART Self-test Log not supported\n\n");
}
else {
ata_smart_selftestlog smartselftest; memset(&smartselftest, 0, sizeof(smartselftest));
- if (ataReadSelfTestLog(device, &smartselftest, fix_firmwarebug)) {
- pout("Smartctl: SMART Self Test Log Read Failed\n");
+ if (ataReadSelfTestLog(device, &smartselftest, firmwarebugs)) {
+ pout("Read SMART Self-test Log failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
print_on();
- if (ataPrintSmartSelfTestlog(&smartselftest, !printing_is_switchable, fix_firmwarebug))
+ if (ataPrintSmartSelfTestlog(&smartselftest, !printing_is_switchable, firmwarebugs))
returnval |= FAILLOG;
print_off();
pout("\n");
ata_selective_self_test_log log;
if (!isSupportSelectiveSelfTest(&smartval))
- pout("Device does not support Selective Self Tests/Logging\n");
+ pout("Selective Self-tests/Logging not supported\n\n");
else if(ataReadSelectiveSelfTestLog(device, &log)) {
- pout("Smartctl: SMART Selective Self Test Log Read Failed\n");
+ pout("Read SMART Selective Self-test Log failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
}
}
- // SCT commands
- bool sct_ok = false;
- if (need_sct_support) {
- if (!isSCTCapable(&drive)) {
- pout("Warning: device does not support SCT Commands\n");
- failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
- }
- else
- sct_ok = true;
- }
+ if(!sct_ok && (options.sct_temp_sts || options.sct_temp_hist || options.sct_temp_int
+ || options.sct_erc_get || options.sct_erc_set ))
+ pout("SCT Commands not supported\n\n");
// Print SCT status and temperature history table
if (sct_ok && (options.sct_temp_sts || options.sct_temp_hist || options.sct_temp_int)) {
}
else {
if (!isSCTDataTableCapable(&drive)) {
- pout("Warning: device does not support SCT Data Table command\n");
+ pout("SCT Data Table command not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
break;
}
// Read SCT status and temperature history
if (ataReadSCTTempHist(device, &tmh, &sts)) {
+ pout("Read SCT Temperature History failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
break;
}
if (options.sct_temp_int) {
// Set new temperature logging interval
if (!isSCTFeatureControlCapable(&drive)) {
- pout("Warning: device does not support SCT Feature Control command\n");
+ pout("SCT Feature Control command not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
break;
}
if (ataSetSCTTempInterval(device, options.sct_temp_int, options.sct_temp_int_pers)) {
+ pout("Write Temperature Logging Interval failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
break;
}
// SCT Error Recovery Control
if (sct_ok && (options.sct_erc_get || options.sct_erc_set)) {
if (!isSCTErrorRecoveryControlCapable(&drive)) {
- pout("Warning: device does not support SCT Error Recovery Control command\n");
+ pout("SCT Error Recovery Control command not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
// Set SCT Error Recovery Control
if ( ataSetSCTErrorRecoveryControltime(device, 1, options.sct_erc_readtime )
|| ataSetSCTErrorRecoveryControltime(device, 2, options.sct_erc_writetime)) {
- pout("Warning: device does not support SCT (Set) Error Recovery Control command\n");
+ pout("SCT (Set) Error Recovery Control command failed\n");
if (!( (options.sct_erc_readtime == 70 && options.sct_erc_writetime == 70)
|| (options.sct_erc_readtime == 0 && options.sct_erc_writetime == 0)))
pout("Retry with: 'scterc,70,70' to enable ERC or 'scterc,0,0' to disable\n");
unsigned short read_timer, write_timer;
if ( ataGetSCTErrorRecoveryControltime(device, 1, read_timer )
|| ataGetSCTErrorRecoveryControltime(device, 2, write_timer)) {
- pout("Warning: device does not support SCT (Get) Error Recovery Control command\n");
+ pout("SCT (Get) Error Recovery Control command failed\n");
if (options.sct_erc_set) {
pout("The previous SCT (Set) Error Recovery Control command succeeded\n");
ataPrintSCTErrorRecoveryControl(true, options.sct_erc_readtime,
if (options.devstat_all_pages || options.devstat_ssd_page || !options.devstat_pages.empty()) {
unsigned nsectors = GetNumLogSectors(gplogdir, 0x04, true);
if (!nsectors)
- pout("Device Statistics (GP Log 0x04) not supported\n");
+ pout("Device Statistics (GP Log 0x04) not supported\n\n");
else if (!print_device_statistics(device, nsectors, options.devstat_pages,
options.devstat_all_pages, options.devstat_ssd_page))
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
// Print SATA Phy Event Counters
if (options.sataphy) {
unsigned nsectors = GetNumLogSectors(gplogdir, 0x11, true);
+ // Packet interface devices do not provide a log directory, check support bit
+ if (!nsectors && (drive.words047_079[76-47] & 0x0401) == 0x0400)
+ nsectors = 1;
if (!nsectors)
- pout("SATA Phy Event Counters (GP Log 0x11) not supported\n");
+ pout("SATA Phy Event Counters (GP Log 0x11) not supported\n\n");
else if (nsectors != 1)
- pout("SATA Phy Event Counters with %u sectors not supported\n", nsectors);
+ pout("SATA Phy Event Counters with %u sectors not supported\n\n", nsectors);
else {
unsigned char log_11[512] = {0, };
unsigned char features = (options.sataphy_reset ? 0x01 : 0x00);
- if (!ataReadLogExt(device, 0x11, features, 0, log_11, 1))
+ if (!ataReadLogExt(device, 0x11, features, 0, log_11, 1)) {
+ pout("Read SATA Phy Event Counters failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
+ }
else
PrintSataPhyEventCounters(log_11, options.sataphy_reset);
}
switch (options.smart_selftest_type) {
case OFFLINE_FULL_SCAN:
if (!isSupportExecuteOfflineImmediate(&smartval)){
- pout("Warning: device does not support Execute Offline Immediate function.\n\n");
+ pout("Execute Offline Immediate function not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case SHORT_CAPTIVE_SELF_TEST:
case EXTEND_CAPTIVE_SELF_TEST:
if (!isSupportSelfTest(&smartval)){
- pout("Warning: device does not support Self-Test functions.\n\n");
+ pout("Self-test functions not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case CONVEYANCE_SELF_TEST:
case CONVEYANCE_CAPTIVE_SELF_TEST:
if (!isSupportConveyanceSelfTest(&smartval)){
- pout("Warning: device does not support Conveyance Self-Test functions.\n\n");
+ pout("Conveyance Self-test functions not supported\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
break;
case SELECTIVE_SELF_TEST:
case SELECTIVE_CAPTIVE_SELF_TEST:
if (!isSupportSelectiveSelfTest(&smartval)){
- pout("Warning: device does not support Selective Self-Test functions.\n\n");
+ pout("Selective Self-test functions not supported\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILSMART);
}
break;
if (isSupportOfflineAbort(&smartval))
pout("Note: giving further SMART commands will abort Offline testing\n");
else if (ataReadSmartValues(device, &smartval)){
- pout("Smartctl: SMART Read Values failed.\n");
+ pout("Read SMART Data failed: %s\n\n", device->get_errmsg());
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
}