*/
/*
- * Copyright (c) 2012 by Delphix. All rights reserved.
+ * Copyright (c) 2012, 2018 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/vdev_impl.h>
+#include <sys/spa_impl.h>
#include <sys/zio.h>
#include <sys/avl.h>
+#include <sys/dsl_pool.h>
+#include <sys/metaslab_impl.h>
+#include <sys/spa.h>
+#include <sys/spa_impl.h>
+#include <sys/kstat.h>
+#include <sys/abd.h>
/*
- * These tunables are for performance analysis.
+ * ZFS I/O Scheduler
+ * ---------------
+ *
+ * ZFS issues I/O operations to leaf vdevs to satisfy and complete zios. The
+ * I/O scheduler determines when and in what order those operations are
+ * issued. The I/O scheduler divides operations into five I/O classes
+ * prioritized in the following order: sync read, sync write, async read,
+ * async write, and scrub/resilver. Each queue defines the minimum and
+ * maximum number of concurrent operations that may be issued to the device.
+ * In addition, the device has an aggregate maximum. Note that the sum of the
+ * per-queue minimums must not exceed the aggregate maximum. If the
+ * sum of the per-queue maximums exceeds the aggregate maximum, then the
+ * number of active i/os may reach zfs_vdev_max_active, in which case no
+ * further i/os will be issued regardless of whether all per-queue
+ * minimums have been met.
+ *
+ * For many physical devices, throughput increases with the number of
+ * concurrent operations, but latency typically suffers. Further, physical
+ * devices typically have a limit at which more concurrent operations have no
+ * effect on throughput or can actually cause it to decrease.
+ *
+ * The scheduler selects the next operation to issue by first looking for an
+ * I/O class whose minimum has not been satisfied. Once all are satisfied and
+ * the aggregate maximum has not been hit, the scheduler looks for classes
+ * whose maximum has not been satisfied. Iteration through the I/O classes is
+ * done in the order specified above. No further operations are issued if the
+ * aggregate maximum number of concurrent operations has been hit or if there
+ * are no operations queued for an I/O class that has not hit its maximum.
+ * Every time an i/o is queued or an operation completes, the I/O scheduler
+ * looks for new operations to issue.
+ *
+ * All I/O classes have a fixed maximum number of outstanding operations
+ * except for the async write class. Asynchronous writes represent the data
+ * that is committed to stable storage during the syncing stage for
+ * transaction groups (see txg.c). Transaction groups enter the syncing state
+ * periodically so the number of queued async writes will quickly burst up and
+ * then bleed down to zero. Rather than servicing them as quickly as possible,
+ * the I/O scheduler changes the maximum number of active async write i/os
+ * according to the amount of dirty data in the pool (see dsl_pool.c). Since
+ * both throughput and latency typically increase with the number of
+ * concurrent operations issued to physical devices, reducing the burstiness
+ * in the number of concurrent operations also stabilizes the response time of
+ * operations from other -- and in particular synchronous -- queues. In broad
+ * strokes, the I/O scheduler will issue more concurrent operations from the
+ * async write queue as there's more dirty data in the pool.
+ *
+ * Async Writes
+ *
+ * The number of concurrent operations issued for the async write I/O class
+ * follows a piece-wise linear function defined by a few adjustable points.
+ *
+ * | o---------| <-- zfs_vdev_async_write_max_active
+ * ^ | /^ |
+ * | | / | |
+ * active | / | |
+ * I/O | / | |
+ * count | / | |
+ * | / | |
+ * |------------o | | <-- zfs_vdev_async_write_min_active
+ * 0|____________^______|_________|
+ * 0% | | 100% of zfs_dirty_data_max
+ * | |
+ * | `-- zfs_vdev_async_write_active_max_dirty_percent
+ * `--------- zfs_vdev_async_write_active_min_dirty_percent
+ *
+ * Until the amount of dirty data exceeds a minimum percentage of the dirty
+ * data allowed in the pool, the I/O scheduler will limit the number of
+ * concurrent operations to the minimum. As that threshold is crossed, the
+ * number of concurrent operations issued increases linearly to the maximum at
+ * the specified maximum percentage of the dirty data allowed in the pool.
+ *
+ * Ideally, the amount of dirty data on a busy pool will stay in the sloped
+ * part of the function between zfs_vdev_async_write_active_min_dirty_percent
+ * and zfs_vdev_async_write_active_max_dirty_percent. If it exceeds the
+ * maximum percentage, this indicates that the rate of incoming data is
+ * greater than the rate that the backend storage can handle. In this case, we
+ * must further throttle incoming writes (see dmu_tx_delay() for details).
*/
+
/*
- * zfs_vdev_max_pending is the maximum number of i/os concurrently
- * pending to each device. zfs_vdev_min_pending is the initial number
- * of i/os pending to each device (before it starts ramping up to
- * max_pending).
+ * The maximum number of i/os active to each device. Ideally, this will be >=
+ * the sum of each queue's max_active. It must be at least the sum of each
+ * queue's min_active.
*/
-int zfs_vdev_max_pending = 10;
-int zfs_vdev_min_pending = 4;
+uint32_t zfs_vdev_max_active = 1000;
/*
- * The deadlines are grouped into buckets based on zfs_vdev_time_shift:
- * deadline = pri + gethrtime() >> time_shift)
+ * Per-queue limits on the number of i/os active to each device. If the
+ * number of active i/os is < zfs_vdev_max_active, then the min_active comes
+ * into play. We will send min_active from each queue, and then select from
+ * queues in the order defined by zio_priority_t.
+ *
+ * In general, smaller max_active's will lead to lower latency of synchronous
+ * operations. Larger max_active's may lead to higher overall throughput,
+ * depending on underlying storage.
+ *
+ * The ratio of the queues' max_actives determines the balance of performance
+ * between reads, writes, and scrubs. E.g., increasing
+ * zfs_vdev_scrub_max_active will cause the scrub or resilver to complete
+ * more quickly, but reads and writes to have higher latency and lower
+ * throughput.
*/
-int zfs_vdev_time_shift = 29; /* each bucket is 0.537 seconds */
+uint32_t zfs_vdev_sync_read_min_active = 10;
+uint32_t zfs_vdev_sync_read_max_active = 10;
+uint32_t zfs_vdev_sync_write_min_active = 10;
+uint32_t zfs_vdev_sync_write_max_active = 10;
+uint32_t zfs_vdev_async_read_min_active = 1;
+uint32_t zfs_vdev_async_read_max_active = 3;
+uint32_t zfs_vdev_async_write_min_active = 2;
+uint32_t zfs_vdev_async_write_max_active = 10;
+uint32_t zfs_vdev_scrub_min_active = 1;
+uint32_t zfs_vdev_scrub_max_active = 2;
+uint32_t zfs_vdev_removal_min_active = 1;
+uint32_t zfs_vdev_removal_max_active = 2;
+uint32_t zfs_vdev_initializing_min_active = 1;
+uint32_t zfs_vdev_initializing_max_active = 1;
+uint32_t zfs_vdev_trim_min_active = 1;
+uint32_t zfs_vdev_trim_max_active = 2;
-/* exponential I/O issue ramp-up rate */
-int zfs_vdev_ramp_rate = 2;
+/*
+ * When the pool has less than zfs_vdev_async_write_active_min_dirty_percent
+ * dirty data, use zfs_vdev_async_write_min_active. When it has more than
+ * zfs_vdev_async_write_active_max_dirty_percent, use
+ * zfs_vdev_async_write_max_active. The value is linearly interpolated
+ * between min and max.
+ */
+int zfs_vdev_async_write_active_min_dirty_percent = 30;
+int zfs_vdev_async_write_active_max_dirty_percent = 60;
/*
* To reduce IOPs, we aggregate small adjacent I/Os into one large I/O.
* we include spans of optional I/Os to aid aggregation at the disk even when
* they aren't able to help us aggregate at this level.
*/
-int zfs_vdev_aggregation_limit = SPA_MAXBLOCKSIZE;
+int zfs_vdev_aggregation_limit = 1 << 20;
+int zfs_vdev_aggregation_limit_non_rotating = SPA_OLD_MAXBLOCKSIZE;
int zfs_vdev_read_gap_limit = 32 << 10;
int zfs_vdev_write_gap_limit = 4 << 10;
/*
- * Virtual device vector for disk I/O scheduling.
+ * Define the queue depth percentage for each top-level. This percentage is
+ * used in conjunction with zfs_vdev_async_max_active to determine how many
+ * allocations a specific top-level vdev should handle. Once the queue depth
+ * reaches zfs_vdev_queue_depth_pct * zfs_vdev_async_write_max_active / 100
+ * then allocator will stop allocating blocks on that top-level device.
+ * The default kernel setting is 1000% which will yield 100 allocations per
+ * device. For userland testing, the default setting is 300% which equates
+ * to 30 allocations per device.
*/
+#ifdef _KERNEL
+int zfs_vdev_queue_depth_pct = 1000;
+#else
+int zfs_vdev_queue_depth_pct = 300;
+#endif
+
+/*
+ * When performing allocations for a given metaslab, we want to make sure that
+ * there are enough IOs to aggregate together to improve throughput. We want to
+ * ensure that there are at least 128k worth of IOs that can be aggregated, and
+ * we assume that the average allocation size is 4k, so we need the queue depth
+ * to be 32 per allocator to get good aggregation of sequential writes.
+ */
+int zfs_vdev_def_queue_depth = 32;
+
+/*
+ * Allow TRIM I/Os to be aggregated. This should normally not be needed since
+ * TRIM I/O for extents up to zfs_trim_extent_bytes_max (128M) can be submitted
+ * by the TRIM code in zfs_trim.c.
+ */
+int zfs_vdev_aggregate_trim = 0;
+
int
-vdev_queue_deadline_compare(const void *x1, const void *x2)
+vdev_queue_offset_compare(const void *x1, const void *x2)
{
- const zio_t *z1 = x1;
- const zio_t *z2 = x2;
+ const zio_t *z1 = (const zio_t *)x1;
+ const zio_t *z2 = (const zio_t *)x2;
+
+ int cmp = AVL_CMP(z1->io_offset, z2->io_offset);
- if (z1->io_deadline < z2->io_deadline)
- return (-1);
- if (z1->io_deadline > z2->io_deadline)
- return (1);
+ if (likely(cmp))
+ return (cmp);
- if (z1->io_offset < z2->io_offset)
- return (-1);
- if (z1->io_offset > z2->io_offset)
- return (1);
+ return (AVL_PCMP(z1, z2));
+}
- if (z1 < z2)
- return (-1);
- if (z1 > z2)
- return (1);
+static inline avl_tree_t *
+vdev_queue_class_tree(vdev_queue_t *vq, zio_priority_t p)
+{
+ return (&vq->vq_class[p].vqc_queued_tree);
+}
- return (0);
+static inline avl_tree_t *
+vdev_queue_type_tree(vdev_queue_t *vq, zio_type_t t)
+{
+ ASSERT(t == ZIO_TYPE_READ || t == ZIO_TYPE_WRITE || t == ZIO_TYPE_TRIM);
+ if (t == ZIO_TYPE_READ)
+ return (&vq->vq_read_offset_tree);
+ else if (t == ZIO_TYPE_WRITE)
+ return (&vq->vq_write_offset_tree);
+ else
+ return (&vq->vq_trim_offset_tree);
}
int
-vdev_queue_offset_compare(const void *x1, const void *x2)
+vdev_queue_timestamp_compare(const void *x1, const void *x2)
{
- const zio_t *z1 = x1;
- const zio_t *z2 = x2;
+ const zio_t *z1 = (const zio_t *)x1;
+ const zio_t *z2 = (const zio_t *)x2;
- if (z1->io_offset < z2->io_offset)
- return (-1);
- if (z1->io_offset > z2->io_offset)
- return (1);
+ int cmp = AVL_CMP(z1->io_timestamp, z2->io_timestamp);
- if (z1 < z2)
- return (-1);
- if (z1 > z2)
- return (1);
+ if (likely(cmp))
+ return (cmp);
- return (0);
+ return (AVL_PCMP(z1, z2));
}
-void
-vdev_queue_init(vdev_t *vd)
+static int
+vdev_queue_class_min_active(zio_priority_t p)
{
- vdev_queue_t *vq = &vd->vdev_queue;
- int i;
+ switch (p) {
+ case ZIO_PRIORITY_SYNC_READ:
+ return (zfs_vdev_sync_read_min_active);
+ case ZIO_PRIORITY_SYNC_WRITE:
+ return (zfs_vdev_sync_write_min_active);
+ case ZIO_PRIORITY_ASYNC_READ:
+ return (zfs_vdev_async_read_min_active);
+ case ZIO_PRIORITY_ASYNC_WRITE:
+ return (zfs_vdev_async_write_min_active);
+ case ZIO_PRIORITY_SCRUB:
+ return (zfs_vdev_scrub_min_active);
+ case ZIO_PRIORITY_REMOVAL:
+ return (zfs_vdev_removal_min_active);
+ case ZIO_PRIORITY_INITIALIZING:
+ return (zfs_vdev_initializing_min_active);
+ case ZIO_PRIORITY_TRIM:
+ return (zfs_vdev_trim_min_active);
+ default:
+ panic("invalid priority %u", p);
+ return (0);
+ }
+}
- mutex_init(&vq->vq_lock, NULL, MUTEX_DEFAULT, NULL);
+static int
+vdev_queue_max_async_writes(spa_t *spa)
+{
+ int writes;
+ uint64_t dirty = 0;
+ dsl_pool_t *dp = spa_get_dsl(spa);
+ uint64_t min_bytes = zfs_dirty_data_max *
+ zfs_vdev_async_write_active_min_dirty_percent / 100;
+ uint64_t max_bytes = zfs_dirty_data_max *
+ zfs_vdev_async_write_active_max_dirty_percent / 100;
- avl_create(&vq->vq_deadline_tree, vdev_queue_deadline_compare,
- sizeof (zio_t), offsetof(struct zio, io_deadline_node));
+ /*
+ * Async writes may occur before the assignment of the spa's
+ * dsl_pool_t if a self-healing zio is issued prior to the
+ * completion of dmu_objset_open_impl().
+ */
+ if (dp == NULL)
+ return (zfs_vdev_async_write_max_active);
- avl_create(&vq->vq_read_tree, vdev_queue_offset_compare,
- sizeof (zio_t), offsetof(struct zio, io_offset_node));
+ /*
+ * Sync tasks correspond to interactive user actions. To reduce the
+ * execution time of those actions we push data out as fast as possible.
+ */
+ if (spa_has_pending_synctask(spa))
+ return (zfs_vdev_async_write_max_active);
- avl_create(&vq->vq_write_tree, vdev_queue_offset_compare,
- sizeof (zio_t), offsetof(struct zio, io_offset_node));
+ dirty = dp->dp_dirty_total;
+ if (dirty < min_bytes)
+ return (zfs_vdev_async_write_min_active);
+ if (dirty > max_bytes)
+ return (zfs_vdev_async_write_max_active);
- avl_create(&vq->vq_pending_tree, vdev_queue_offset_compare,
- sizeof (zio_t), offsetof(struct zio, io_offset_node));
+ /*
+ * linear interpolation:
+ * slope = (max_writes - min_writes) / (max_bytes - min_bytes)
+ * move right by min_bytes
+ * move up by min_writes
+ */
+ writes = (dirty - min_bytes) *
+ (zfs_vdev_async_write_max_active -
+ zfs_vdev_async_write_min_active) /
+ (max_bytes - min_bytes) +
+ zfs_vdev_async_write_min_active;
+ ASSERT3U(writes, >=, zfs_vdev_async_write_min_active);
+ ASSERT3U(writes, <=, zfs_vdev_async_write_max_active);
+ return (writes);
+}
+
+static int
+vdev_queue_class_max_active(spa_t *spa, zio_priority_t p)
+{
+ switch (p) {
+ case ZIO_PRIORITY_SYNC_READ:
+ return (zfs_vdev_sync_read_max_active);
+ case ZIO_PRIORITY_SYNC_WRITE:
+ return (zfs_vdev_sync_write_max_active);
+ case ZIO_PRIORITY_ASYNC_READ:
+ return (zfs_vdev_async_read_max_active);
+ case ZIO_PRIORITY_ASYNC_WRITE:
+ return (vdev_queue_max_async_writes(spa));
+ case ZIO_PRIORITY_SCRUB:
+ return (zfs_vdev_scrub_max_active);
+ case ZIO_PRIORITY_REMOVAL:
+ return (zfs_vdev_removal_max_active);
+ case ZIO_PRIORITY_INITIALIZING:
+ return (zfs_vdev_initializing_max_active);
+ case ZIO_PRIORITY_TRIM:
+ return (zfs_vdev_trim_max_active);
+ default:
+ panic("invalid priority %u", p);
+ return (0);
+ }
+}
+
+/*
+ * Return the i/o class to issue from, or ZIO_PRIORITY_MAX_QUEUEABLE if
+ * there is no eligible class.
+ */
+static zio_priority_t
+vdev_queue_class_to_issue(vdev_queue_t *vq)
+{
+ spa_t *spa = vq->vq_vdev->vdev_spa;
+ zio_priority_t p;
+
+ if (avl_numnodes(&vq->vq_active_tree) >= zfs_vdev_max_active)
+ return (ZIO_PRIORITY_NUM_QUEUEABLE);
+
+ /* find a queue that has not reached its minimum # outstanding i/os */
+ for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
+ if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 &&
+ vq->vq_class[p].vqc_active <
+ vdev_queue_class_min_active(p))
+ return (p);
+ }
/*
- * A list of buffers which can be used for aggregate I/O, this
- * avoids the need to allocate them on demand when memory is low.
+ * If we haven't found a queue, look for one that hasn't reached its
+ * maximum # outstanding i/os.
*/
- list_create(&vq->vq_io_list, sizeof (vdev_io_t),
- offsetof(vdev_io_t, vi_node));
+ for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
+ if (avl_numnodes(vdev_queue_class_tree(vq, p)) > 0 &&
+ vq->vq_class[p].vqc_active <
+ vdev_queue_class_max_active(spa, p))
+ return (p);
+ }
- for (i = 0; i < zfs_vdev_max_pending; i++)
- list_insert_tail(&vq->vq_io_list, zio_vdev_alloc());
+ /* No eligible queued i/os */
+ return (ZIO_PRIORITY_NUM_QUEUEABLE);
}
void
-vdev_queue_fini(vdev_t *vd)
+vdev_queue_init(vdev_t *vd)
{
vdev_queue_t *vq = &vd->vdev_queue;
- vdev_io_t *vi;
+ zio_priority_t p;
- avl_destroy(&vq->vq_deadline_tree);
- avl_destroy(&vq->vq_read_tree);
- avl_destroy(&vq->vq_write_tree);
- avl_destroy(&vq->vq_pending_tree);
+ mutex_init(&vq->vq_lock, NULL, MUTEX_DEFAULT, NULL);
+ vq->vq_vdev = vd;
+ taskq_init_ent(&vd->vdev_queue.vq_io_search.io_tqent);
+
+ avl_create(&vq->vq_active_tree, vdev_queue_offset_compare,
+ sizeof (zio_t), offsetof(struct zio, io_queue_node));
+ avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_READ),
+ vdev_queue_offset_compare, sizeof (zio_t),
+ offsetof(struct zio, io_offset_node));
+ avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE),
+ vdev_queue_offset_compare, sizeof (zio_t),
+ offsetof(struct zio, io_offset_node));
+ avl_create(vdev_queue_type_tree(vq, ZIO_TYPE_TRIM),
+ vdev_queue_offset_compare, sizeof (zio_t),
+ offsetof(struct zio, io_offset_node));
+
+ for (p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++) {
+ int (*compfn) (const void *, const void *);
- while ((vi = list_head(&vq->vq_io_list)) != NULL) {
- list_remove(&vq->vq_io_list, vi);
- zio_vdev_free(vi);
+ /*
+ * The synchronous/trim i/o queues are dispatched in FIFO rather
+ * than LBA order. This provides more consistent latency for
+ * these i/os.
+ */
+ if (p == ZIO_PRIORITY_SYNC_READ ||
+ p == ZIO_PRIORITY_SYNC_WRITE ||
+ p == ZIO_PRIORITY_TRIM) {
+ compfn = vdev_queue_timestamp_compare;
+ } else {
+ compfn = vdev_queue_offset_compare;
+ }
+ avl_create(vdev_queue_class_tree(vq, p), compfn,
+ sizeof (zio_t), offsetof(struct zio, io_queue_node));
}
- list_destroy(&vq->vq_io_list);
+ vq->vq_last_offset = 0;
+}
+
+void
+vdev_queue_fini(vdev_t *vd)
+{
+ vdev_queue_t *vq = &vd->vdev_queue;
+
+ for (zio_priority_t p = 0; p < ZIO_PRIORITY_NUM_QUEUEABLE; p++)
+ avl_destroy(vdev_queue_class_tree(vq, p));
+ avl_destroy(&vq->vq_active_tree);
+ avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_READ));
+ avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_WRITE));
+ avl_destroy(vdev_queue_type_tree(vq, ZIO_TYPE_TRIM));
mutex_destroy(&vq->vq_lock);
}
static void
vdev_queue_io_add(vdev_queue_t *vq, zio_t *zio)
{
- avl_add(&vq->vq_deadline_tree, zio);
- avl_add(zio->io_vdev_tree, zio);
+ spa_t *spa = zio->io_spa;
+ spa_history_kstat_t *shk = &spa->spa_stats.io_history;
+
+ ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+ avl_add(vdev_queue_class_tree(vq, zio->io_priority), zio);
+ avl_add(vdev_queue_type_tree(vq, zio->io_type), zio);
+
+ if (shk->kstat != NULL) {
+ mutex_enter(&shk->lock);
+ kstat_waitq_enter(shk->kstat->ks_data);
+ mutex_exit(&shk->lock);
+ }
}
static void
vdev_queue_io_remove(vdev_queue_t *vq, zio_t *zio)
{
- avl_remove(&vq->vq_deadline_tree, zio);
- avl_remove(zio->io_vdev_tree, zio);
+ spa_t *spa = zio->io_spa;
+ spa_history_kstat_t *shk = &spa->spa_stats.io_history;
+
+ ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+ avl_remove(vdev_queue_class_tree(vq, zio->io_priority), zio);
+ avl_remove(vdev_queue_type_tree(vq, zio->io_type), zio);
+
+ if (shk->kstat != NULL) {
+ mutex_enter(&shk->lock);
+ kstat_waitq_exit(shk->kstat->ks_data);
+ mutex_exit(&shk->lock);
+ }
}
static void
-vdev_queue_agg_io_done(zio_t *aio)
+vdev_queue_pending_add(vdev_queue_t *vq, zio_t *zio)
{
- vdev_queue_t *vq = &aio->io_vd->vdev_queue;
- vdev_io_t *vi = aio->io_data;
- zio_t *pio;
+ spa_t *spa = zio->io_spa;
+ spa_history_kstat_t *shk = &spa->spa_stats.io_history;
- while ((pio = zio_walk_parents(aio)) != NULL)
- if (aio->io_type == ZIO_TYPE_READ)
- bcopy((char *)aio->io_data + (pio->io_offset -
- aio->io_offset), pio->io_data, pio->io_size);
+ ASSERT(MUTEX_HELD(&vq->vq_lock));
+ ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+ vq->vq_class[zio->io_priority].vqc_active++;
+ avl_add(&vq->vq_active_tree, zio);
+
+ if (shk->kstat != NULL) {
+ mutex_enter(&shk->lock);
+ kstat_runq_enter(shk->kstat->ks_data);
+ mutex_exit(&shk->lock);
+ }
+}
- mutex_enter(&vq->vq_lock);
- list_insert_tail(&vq->vq_io_list, vi);
- mutex_exit(&vq->vq_lock);
+static void
+vdev_queue_pending_remove(vdev_queue_t *vq, zio_t *zio)
+{
+ spa_t *spa = zio->io_spa;
+ spa_history_kstat_t *shk = &spa->spa_stats.io_history;
+
+ ASSERT(MUTEX_HELD(&vq->vq_lock));
+ ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+ vq->vq_class[zio->io_priority].vqc_active--;
+ avl_remove(&vq->vq_active_tree, zio);
+
+ if (shk->kstat != NULL) {
+ kstat_io_t *ksio = shk->kstat->ks_data;
+
+ mutex_enter(&shk->lock);
+ kstat_runq_exit(ksio);
+ if (zio->io_type == ZIO_TYPE_READ) {
+ ksio->reads++;
+ ksio->nread += zio->io_size;
+ } else if (zio->io_type == ZIO_TYPE_WRITE) {
+ ksio->writes++;
+ ksio->nwritten += zio->io_size;
+ }
+ mutex_exit(&shk->lock);
+ }
+}
+
+static void
+vdev_queue_agg_io_done(zio_t *aio)
+{
+ if (aio->io_type == ZIO_TYPE_READ) {
+ zio_t *pio;
+ zio_link_t *zl = NULL;
+ while ((pio = zio_walk_parents(aio, &zl)) != NULL) {
+ abd_copy_off(pio->io_abd, aio->io_abd,
+ 0, pio->io_offset - aio->io_offset, pio->io_size);
+ }
+ }
+
+ abd_free(aio->io_abd);
}
/*
#define IO_GAP(fio, lio) (-IO_SPAN(lio, fio))
static zio_t *
-vdev_queue_io_to_issue(vdev_queue_t *vq, uint64_t pending_limit)
+vdev_queue_aggregate(vdev_queue_t *vq, zio_t *zio)
{
- zio_t *fio, *lio, *aio, *dio, *nio, *mio;
- avl_tree_t *t;
- vdev_io_t *vi;
- int flags;
- uint64_t maxspan = MIN(zfs_vdev_aggregation_limit, SPA_MAXBLOCKSIZE);
- uint64_t maxgap;
- int stretch;
+ zio_t *first, *last, *aio, *dio, *mandatory, *nio;
+ zio_link_t *zl = NULL;
+ uint64_t maxgap = 0;
+ uint64_t size;
+ uint64_t limit;
+ int maxblocksize;
+ boolean_t stretch = B_FALSE;
+ avl_tree_t *t = vdev_queue_type_tree(vq, zio->io_type);
+ enum zio_flag flags = zio->io_flags & ZIO_FLAG_AGG_INHERIT;
+ abd_t *abd;
+
+ maxblocksize = spa_maxblocksize(vq->vq_vdev->vdev_spa);
+ if (vq->vq_vdev->vdev_nonrot)
+ limit = zfs_vdev_aggregation_limit_non_rotating;
+ else
+ limit = zfs_vdev_aggregation_limit;
+ limit = MAX(MIN(limit, maxblocksize), 0);
-again:
- ASSERT(MUTEX_HELD(&vq->vq_lock));
+ if (zio->io_flags & ZIO_FLAG_DONT_AGGREGATE || limit == 0)
+ return (NULL);
- if (avl_numnodes(&vq->vq_pending_tree) >= pending_limit ||
- avl_numnodes(&vq->vq_deadline_tree) == 0)
+ /*
+ * While TRIM commands could be aggregated based on offset this
+ * behavior is disabled until it's determined to be beneficial.
+ */
+ if (zio->io_type == ZIO_TYPE_TRIM && !zfs_vdev_aggregate_trim)
return (NULL);
- fio = lio = avl_first(&vq->vq_deadline_tree);
+ first = last = zio;
+
+ if (zio->io_type == ZIO_TYPE_READ)
+ maxgap = zfs_vdev_read_gap_limit;
+
+ /*
+ * We can aggregate I/Os that are sufficiently adjacent and of
+ * the same flavor, as expressed by the AGG_INHERIT flags.
+ * The latter requirement is necessary so that certain
+ * attributes of the I/O, such as whether it's a normal I/O
+ * or a scrub/resilver, can be preserved in the aggregate.
+ * We can include optional I/Os, but don't allow them
+ * to begin a range as they add no benefit in that situation.
+ */
+
+ /*
+ * We keep track of the last non-optional I/O.
+ */
+ mandatory = (first->io_flags & ZIO_FLAG_OPTIONAL) ? NULL : first;
- t = fio->io_vdev_tree;
- flags = fio->io_flags & ZIO_FLAG_AGG_INHERIT;
- maxgap = (t == &vq->vq_read_tree) ? zfs_vdev_read_gap_limit : 0;
+ /*
+ * Walk backwards through sufficiently contiguous I/Os
+ * recording the last non-optional I/O.
+ */
+ while ((dio = AVL_PREV(t, first)) != NULL &&
+ (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
+ IO_SPAN(dio, last) <= limit &&
+ IO_GAP(dio, first) <= maxgap &&
+ dio->io_type == zio->io_type) {
+ first = dio;
+ if (mandatory == NULL && !(first->io_flags & ZIO_FLAG_OPTIONAL))
+ mandatory = first;
+ }
- vi = list_head(&vq->vq_io_list);
- if (vi == NULL) {
- vi = zio_vdev_alloc();
- list_insert_head(&vq->vq_io_list, vi);
+ /*
+ * Skip any initial optional I/Os.
+ */
+ while ((first->io_flags & ZIO_FLAG_OPTIONAL) && first != last) {
+ first = AVL_NEXT(t, first);
+ ASSERT(first != NULL);
}
- if (!(flags & ZIO_FLAG_DONT_AGGREGATE)) {
- /*
- * We can aggregate I/Os that are sufficiently adjacent and of
- * the same flavor, as expressed by the AGG_INHERIT flags.
- * The latter requirement is necessary so that certain
- * attributes of the I/O, such as whether it's a normal I/O
- * or a scrub/resilver, can be preserved in the aggregate.
- * We can include optional I/Os, but don't allow them
- * to begin a range as they add no benefit in that situation.
- */
- /*
- * We keep track of the last non-optional I/O.
- */
- mio = (fio->io_flags & ZIO_FLAG_OPTIONAL) ? NULL : fio;
+ /*
+ * Walk forward through sufficiently contiguous I/Os.
+ * The aggregation limit does not apply to optional i/os, so that
+ * we can issue contiguous writes even if they are larger than the
+ * aggregation limit.
+ */
+ while ((dio = AVL_NEXT(t, last)) != NULL &&
+ (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
+ (IO_SPAN(first, dio) <= limit ||
+ (dio->io_flags & ZIO_FLAG_OPTIONAL)) &&
+ IO_SPAN(first, dio) <= maxblocksize &&
+ IO_GAP(last, dio) <= maxgap &&
+ dio->io_type == zio->io_type) {
+ last = dio;
+ if (!(last->io_flags & ZIO_FLAG_OPTIONAL))
+ mandatory = last;
+ }
- /*
- * Walk backwards through sufficiently contiguous I/Os
- * recording the last non-option I/O.
- */
- while ((dio = AVL_PREV(t, fio)) != NULL &&
- (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
- IO_SPAN(dio, lio) <= maxspan &&
- IO_GAP(dio, fio) <= maxgap) {
- fio = dio;
- if (mio == NULL && !(fio->io_flags & ZIO_FLAG_OPTIONAL))
- mio = fio;
+ /*
+ * Now that we've established the range of the I/O aggregation
+ * we must decide what to do with trailing optional I/Os.
+ * For reads, there's nothing to do. While we are unable to
+ * aggregate further, it's possible that a trailing optional
+ * I/O would allow the underlying device to aggregate with
+ * subsequent I/Os. We must therefore determine if the next
+ * non-optional I/O is close enough to make aggregation
+ * worthwhile.
+ */
+ if (zio->io_type == ZIO_TYPE_WRITE && mandatory != NULL) {
+ zio_t *nio = last;
+ while ((dio = AVL_NEXT(t, nio)) != NULL &&
+ IO_GAP(nio, dio) == 0 &&
+ IO_GAP(mandatory, dio) <= zfs_vdev_write_gap_limit) {
+ nio = dio;
+ if (!(nio->io_flags & ZIO_FLAG_OPTIONAL)) {
+ stretch = B_TRUE;
+ break;
+ }
}
+ }
+ if (stretch) {
/*
- * Skip any initial optional I/Os.
+ * We are going to include an optional io in our aggregated
+ * span, thus closing the write gap. Only mandatory i/os can
+ * start aggregated spans, so make sure that the next i/o
+ * after our span is mandatory.
*/
- while ((fio->io_flags & ZIO_FLAG_OPTIONAL) && fio != lio) {
- fio = AVL_NEXT(t, fio);
- ASSERT(fio != NULL);
+ dio = AVL_NEXT(t, last);
+ dio->io_flags &= ~ZIO_FLAG_OPTIONAL;
+ } else {
+ /* do not include the optional i/o */
+ while (last != mandatory && last != first) {
+ ASSERT(last->io_flags & ZIO_FLAG_OPTIONAL);
+ last = AVL_PREV(t, last);
+ ASSERT(last != NULL);
}
+ }
- /*
- * Walk forward through sufficiently contiguous I/Os.
- */
- while ((dio = AVL_NEXT(t, lio)) != NULL &&
- (dio->io_flags & ZIO_FLAG_AGG_INHERIT) == flags &&
- IO_SPAN(fio, dio) <= maxspan &&
- IO_GAP(lio, dio) <= maxgap) {
- lio = dio;
- if (!(lio->io_flags & ZIO_FLAG_OPTIONAL))
- mio = lio;
- }
+ if (first == last)
+ return (NULL);
- /*
- * Now that we've established the range of the I/O aggregation
- * we must decide what to do with trailing optional I/Os.
- * For reads, there's nothing to do. While we are unable to
- * aggregate further, it's possible that a trailing optional
- * I/O would allow the underlying device to aggregate with
- * subsequent I/Os. We must therefore determine if the next
- * non-optional I/O is close enough to make aggregation
- * worthwhile.
- */
- stretch = B_FALSE;
- if (t != &vq->vq_read_tree && mio != NULL) {
- nio = lio;
- while ((dio = AVL_NEXT(t, nio)) != NULL &&
- IO_GAP(nio, dio) == 0 &&
- IO_GAP(mio, dio) <= zfs_vdev_write_gap_limit) {
- nio = dio;
- if (!(nio->io_flags & ZIO_FLAG_OPTIONAL)) {
- stretch = B_TRUE;
- break;
- }
- }
- }
+ size = IO_SPAN(first, last);
+ ASSERT3U(size, <=, maxblocksize);
- if (stretch) {
- /* This may be a no-op. */
- VERIFY((dio = AVL_NEXT(t, lio)) != NULL);
- dio->io_flags &= ~ZIO_FLAG_OPTIONAL;
- } else {
- while (lio != mio && lio != fio) {
- ASSERT(lio->io_flags & ZIO_FLAG_OPTIONAL);
- lio = AVL_PREV(t, lio);
- ASSERT(lio != NULL);
- }
+ abd = abd_alloc_for_io(size, B_TRUE);
+ if (abd == NULL)
+ return (NULL);
+
+ aio = zio_vdev_delegated_io(first->io_vd, first->io_offset,
+ abd, size, first->io_type, zio->io_priority,
+ flags | ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE,
+ vdev_queue_agg_io_done, NULL);
+ aio->io_timestamp = first->io_timestamp;
+
+ nio = first;
+ do {
+ dio = nio;
+ nio = AVL_NEXT(t, dio);
+ ASSERT3U(dio->io_type, ==, aio->io_type);
+
+ if (dio->io_flags & ZIO_FLAG_NODATA) {
+ ASSERT3U(dio->io_type, ==, ZIO_TYPE_WRITE);
+ abd_zero_off(aio->io_abd,
+ dio->io_offset - aio->io_offset, dio->io_size);
+ } else if (dio->io_type == ZIO_TYPE_WRITE) {
+ abd_copy_off(aio->io_abd, dio->io_abd,
+ dio->io_offset - aio->io_offset, 0, dio->io_size);
}
+
+ zio_add_child(dio, aio);
+ vdev_queue_io_remove(vq, dio);
+ } while (dio != last);
+
+ /*
+ * We need to drop the vdev queue's lock to avoid a deadlock that we
+ * could encounter since this I/O will complete immediately.
+ */
+ mutex_exit(&vq->vq_lock);
+ while ((dio = zio_walk_parents(aio, &zl)) != NULL) {
+ zio_vdev_io_bypass(dio);
+ zio_execute(dio);
}
+ mutex_enter(&vq->vq_lock);
- if (fio != lio) {
- uint64_t size = IO_SPAN(fio, lio);
- ASSERT(size <= maxspan);
- ASSERT(vi != NULL);
-
- aio = zio_vdev_delegated_io(fio->io_vd, fio->io_offset,
- vi, size, fio->io_type, ZIO_PRIORITY_AGG,
- flags | ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE,
- vdev_queue_agg_io_done, NULL);
- aio->io_timestamp = fio->io_timestamp;
-
- nio = fio;
- do {
- dio = nio;
- nio = AVL_NEXT(t, dio);
- ASSERT(dio->io_type == aio->io_type);
- ASSERT(dio->io_vdev_tree == t);
-
- if (dio->io_flags & ZIO_FLAG_NODATA) {
- ASSERT(dio->io_type == ZIO_TYPE_WRITE);
- bzero((char *)aio->io_data + (dio->io_offset -
- aio->io_offset), dio->io_size);
- } else if (dio->io_type == ZIO_TYPE_WRITE) {
- bcopy(dio->io_data, (char *)aio->io_data +
- (dio->io_offset - aio->io_offset),
- dio->io_size);
- }
+ return (aio);
+}
- zio_add_child(dio, aio);
- vdev_queue_io_remove(vq, dio);
- zio_vdev_io_bypass(dio);
- zio_execute(dio);
- } while (dio != lio);
+static zio_t *
+vdev_queue_io_to_issue(vdev_queue_t *vq)
+{
+ zio_t *zio, *aio;
+ zio_priority_t p;
+ avl_index_t idx;
+ avl_tree_t *tree;
- avl_add(&vq->vq_pending_tree, aio);
- list_remove(&vq->vq_io_list, vi);
+again:
+ ASSERT(MUTEX_HELD(&vq->vq_lock));
- return (aio);
+ p = vdev_queue_class_to_issue(vq);
+
+ if (p == ZIO_PRIORITY_NUM_QUEUEABLE) {
+ /* No eligible queued i/os */
+ return (NULL);
}
- ASSERT(fio->io_vdev_tree == t);
- vdev_queue_io_remove(vq, fio);
+ /*
+ * For LBA-ordered queues (async / scrub / initializing), issue the
+ * i/o which follows the most recently issued i/o in LBA (offset) order.
+ *
+ * For FIFO queues (sync/trim), issue the i/o with the lowest timestamp.
+ */
+ tree = vdev_queue_class_tree(vq, p);
+ vq->vq_io_search.io_timestamp = 0;
+ vq->vq_io_search.io_offset = vq->vq_last_offset - 1;
+ VERIFY3P(avl_find(tree, &vq->vq_io_search, &idx), ==, NULL);
+ zio = avl_nearest(tree, idx, AVL_AFTER);
+ if (zio == NULL)
+ zio = avl_first(tree);
+ ASSERT3U(zio->io_priority, ==, p);
+
+ aio = vdev_queue_aggregate(vq, zio);
+ if (aio != NULL)
+ zio = aio;
+ else
+ vdev_queue_io_remove(vq, zio);
/*
* If the I/O is or was optional and therefore has no data, we need to
* deadlock that we could encounter since this I/O will complete
* immediately.
*/
- if (fio->io_flags & ZIO_FLAG_NODATA) {
+ if (zio->io_flags & ZIO_FLAG_NODATA) {
mutex_exit(&vq->vq_lock);
- zio_vdev_io_bypass(fio);
- zio_execute(fio);
+ zio_vdev_io_bypass(zio);
+ zio_execute(zio);
mutex_enter(&vq->vq_lock);
goto again;
}
- avl_add(&vq->vq_pending_tree, fio);
+ vdev_queue_pending_add(vq, zio);
+ vq->vq_last_offset = zio->io_offset + zio->io_size;
- return (fio);
+ return (zio);
}
zio_t *
vdev_queue_t *vq = &zio->io_vd->vdev_queue;
zio_t *nio;
- ASSERT(zio->io_type == ZIO_TYPE_READ || zio->io_type == ZIO_TYPE_WRITE);
-
if (zio->io_flags & ZIO_FLAG_DONT_QUEUE)
return (zio);
- zio->io_flags |= ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE;
+ /*
+ * Children i/os inherent their parent's priority, which might
+ * not match the child's i/o type. Fix it up here.
+ */
+ if (zio->io_type == ZIO_TYPE_READ) {
+ ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);
+
+ if (zio->io_priority != ZIO_PRIORITY_SYNC_READ &&
+ zio->io_priority != ZIO_PRIORITY_ASYNC_READ &&
+ zio->io_priority != ZIO_PRIORITY_SCRUB &&
+ zio->io_priority != ZIO_PRIORITY_REMOVAL &&
+ zio->io_priority != ZIO_PRIORITY_INITIALIZING) {
+ zio->io_priority = ZIO_PRIORITY_ASYNC_READ;
+ }
+ } else if (zio->io_type == ZIO_TYPE_WRITE) {
+ ASSERT(zio->io_priority != ZIO_PRIORITY_TRIM);
+
+ if (zio->io_priority != ZIO_PRIORITY_SYNC_WRITE &&
+ zio->io_priority != ZIO_PRIORITY_ASYNC_WRITE &&
+ zio->io_priority != ZIO_PRIORITY_REMOVAL &&
+ zio->io_priority != ZIO_PRIORITY_INITIALIZING) {
+ zio->io_priority = ZIO_PRIORITY_ASYNC_WRITE;
+ }
+ } else {
+ ASSERT(zio->io_type == ZIO_TYPE_TRIM);
+ ASSERT(zio->io_priority == ZIO_PRIORITY_TRIM);
+ }
- if (zio->io_type == ZIO_TYPE_READ)
- zio->io_vdev_tree = &vq->vq_read_tree;
- else
- zio->io_vdev_tree = &vq->vq_write_tree;
+ zio->io_flags |= ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_QUEUE;
mutex_enter(&vq->vq_lock);
-
zio->io_timestamp = gethrtime();
- zio->io_deadline = (zio->io_timestamp >> zfs_vdev_time_shift) +
- zio->io_priority;
-
vdev_queue_io_add(vq, zio);
-
- nio = vdev_queue_io_to_issue(vq, zfs_vdev_min_pending);
-
+ nio = vdev_queue_io_to_issue(vq);
mutex_exit(&vq->vq_lock);
if (nio == NULL)
vdev_queue_io_done(zio_t *zio)
{
vdev_queue_t *vq = &zio->io_vd->vdev_queue;
- int i;
-
- if (zio_injection_enabled)
- delay(SEC_TO_TICK(zio_handle_io_delay(zio)));
+ zio_t *nio;
mutex_enter(&vq->vq_lock);
- avl_remove(&vq->vq_pending_tree, zio);
+ vdev_queue_pending_remove(vq, zio);
zio->io_delta = gethrtime() - zio->io_timestamp;
vq->vq_io_complete_ts = gethrtime();
vq->vq_io_delta_ts = vq->vq_io_complete_ts - zio->io_timestamp;
- for (i = 0; i < zfs_vdev_ramp_rate; i++) {
- zio_t *nio = vdev_queue_io_to_issue(vq, zfs_vdev_max_pending);
- if (nio == NULL)
- break;
+ while ((nio = vdev_queue_io_to_issue(vq)) != NULL) {
mutex_exit(&vq->vq_lock);
if (nio->io_done == vdev_queue_agg_io_done) {
zio_nowait(nio);
mutex_exit(&vq->vq_lock);
}
-#if defined(_KERNEL) && defined(HAVE_SPL)
-module_param(zfs_vdev_max_pending, int, 0644);
-MODULE_PARM_DESC(zfs_vdev_max_pending, "Max pending per-vdev I/Os");
+void
+vdev_queue_change_io_priority(zio_t *zio, zio_priority_t priority)
+{
+ vdev_queue_t *vq = &zio->io_vd->vdev_queue;
+ avl_tree_t *tree;
+
+ /*
+ * ZIO_PRIORITY_NOW is used by the vdev cache code and the aggregate zio
+ * code to issue IOs without adding them to the vdev queue. In this
+ * case, the zio is already going to be issued as quickly as possible
+ * and so it doesn't need any reprioitization to help.
+ */
+ if (zio->io_priority == ZIO_PRIORITY_NOW)
+ return;
+
+ ASSERT3U(zio->io_priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+ ASSERT3U(priority, <, ZIO_PRIORITY_NUM_QUEUEABLE);
+
+ if (zio->io_type == ZIO_TYPE_READ) {
+ if (priority != ZIO_PRIORITY_SYNC_READ &&
+ priority != ZIO_PRIORITY_ASYNC_READ &&
+ priority != ZIO_PRIORITY_SCRUB)
+ priority = ZIO_PRIORITY_ASYNC_READ;
+ } else {
+ ASSERT(zio->io_type == ZIO_TYPE_WRITE);
+ if (priority != ZIO_PRIORITY_SYNC_WRITE &&
+ priority != ZIO_PRIORITY_ASYNC_WRITE)
+ priority = ZIO_PRIORITY_ASYNC_WRITE;
+ }
+
+ mutex_enter(&vq->vq_lock);
+
+ /*
+ * If the zio is in none of the queues we can simply change
+ * the priority. If the zio is waiting to be submitted we must
+ * remove it from the queue and re-insert it with the new priority.
+ * Otherwise, the zio is currently active and we cannot change its
+ * priority.
+ */
+ tree = vdev_queue_class_tree(vq, zio->io_priority);
+ if (avl_find(tree, zio, NULL) == zio) {
+ avl_remove(vdev_queue_class_tree(vq, zio->io_priority), zio);
+ zio->io_priority = priority;
+ avl_add(vdev_queue_class_tree(vq, zio->io_priority), zio);
+ } else if (avl_find(&vq->vq_active_tree, zio, NULL) != zio) {
+ zio->io_priority = priority;
+ }
+
+ mutex_exit(&vq->vq_lock);
+}
+
+/*
+ * As these two methods are only used for load calculations we're not
+ * concerned if we get an incorrect value on 32bit platforms due to lack of
+ * vq_lock mutex use here, instead we prefer to keep it lock free for
+ * performance.
+ */
+int
+vdev_queue_length(vdev_t *vd)
+{
+ return (avl_numnodes(&vd->vdev_queue.vq_active_tree));
+}
-module_param(zfs_vdev_min_pending, int, 0644);
-MODULE_PARM_DESC(zfs_vdev_min_pending, "Min pending per-vdev I/Os");
+uint64_t
+vdev_queue_last_offset(vdev_t *vd)
+{
+ return (vd->vdev_queue.vq_last_offset);
+}
+#if defined(_KERNEL)
module_param(zfs_vdev_aggregation_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_aggregation_limit, "Max vdev I/O aggregation size");
-module_param(zfs_vdev_time_shift, int, 0644);
-MODULE_PARM_DESC(zfs_vdev_time_shift, "Deadline time shift for vdev I/O");
+module_param(zfs_vdev_aggregation_limit_non_rotating, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_aggregation_limit_non_rotating,
+ "Max vdev I/O aggregation size for non-rotating media");
-module_param(zfs_vdev_ramp_rate, int, 0644);
-MODULE_PARM_DESC(zfs_vdev_ramp_rate, "Exponential I/O issue ramp-up rate");
+module_param(zfs_vdev_aggregate_trim, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_aggregate_trim, "Allow TRIM I/O to be aggregated");
module_param(zfs_vdev_read_gap_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_read_gap_limit, "Aggregate read I/O over gap");
module_param(zfs_vdev_write_gap_limit, int, 0644);
MODULE_PARM_DESC(zfs_vdev_write_gap_limit, "Aggregate write I/O over gap");
+
+module_param(zfs_vdev_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_max_active, "Maximum number of active I/Os per vdev");
+
+module_param(zfs_vdev_async_write_active_max_dirty_percent, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_write_active_max_dirty_percent,
+ "Async write concurrency max threshold");
+
+module_param(zfs_vdev_async_write_active_min_dirty_percent, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_write_active_min_dirty_percent,
+ "Async write concurrency min threshold");
+
+module_param(zfs_vdev_async_read_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_read_max_active,
+ "Max active async read I/Os per vdev");
+
+module_param(zfs_vdev_async_read_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_read_min_active,
+ "Min active async read I/Os per vdev");
+
+module_param(zfs_vdev_async_write_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_write_max_active,
+ "Max active async write I/Os per vdev");
+
+module_param(zfs_vdev_async_write_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_async_write_min_active,
+ "Min active async write I/Os per vdev");
+
+module_param(zfs_vdev_initializing_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_initializing_max_active,
+ "Max active initializing I/Os per vdev");
+
+module_param(zfs_vdev_initializing_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_initializing_min_active,
+ "Min active initializing I/Os per vdev");
+
+module_param(zfs_vdev_removal_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_removal_max_active,
+ "Max active removal I/Os per vdev");
+
+module_param(zfs_vdev_removal_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_removal_min_active,
+ "Min active removal I/Os per vdev");
+
+module_param(zfs_vdev_scrub_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_scrub_max_active,
+ "Max active scrub I/Os per vdev");
+
+module_param(zfs_vdev_scrub_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_scrub_min_active,
+ "Min active scrub I/Os per vdev");
+
+module_param(zfs_vdev_sync_read_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_sync_read_max_active,
+ "Max active sync read I/Os per vdev");
+
+module_param(zfs_vdev_sync_read_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_sync_read_min_active,
+ "Min active sync read I/Os per vdev");
+
+module_param(zfs_vdev_sync_write_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_sync_write_max_active,
+ "Max active sync write I/Os per vdev");
+
+module_param(zfs_vdev_sync_write_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_sync_write_min_active,
+ "Min active sync write I/Os per vdev");
+
+module_param(zfs_vdev_trim_max_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_trim_max_active,
+ "Max active trim/discard I/Os per vdev");
+
+module_param(zfs_vdev_trim_min_active, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_trim_min_active,
+ "Min active trim/discard I/Os per vdev");
+
+module_param(zfs_vdev_queue_depth_pct, int, 0644);
+MODULE_PARM_DESC(zfs_vdev_queue_depth_pct,
+ "Queue depth percentage for each top-level vdev");
#endif