#define PATHINQ_SETTINGS_SIZE 128
#endif
-const char *os_XXXX_c_cvsid="$Id: os_freebsd.cpp 3824 2013-07-05 10:40:38Z samm2 $" \
+const char *os_XXXX_c_cvsid="$Id: os_freebsd.cpp 3902 2014-05-23 19:14:15Z samm2 $" \
ATACMDS_H_CVSID CCISS_H_CVSID CONFIG_H_CVSID INT64_H_CVSID OS_FREEBSD_H_CVSID SCSICMDS_H_CVSID UTILITY_H_CVSID;
#define NO_RETURN 0
: virtual public /*implements*/ smart_device
{
public:
- explicit freebsd_smart_device(const char * mode)
+ explicit freebsd_smart_device()
: smart_device(never_called),
- m_fd(-1), m_mode(mode) { }
+ m_fd(-1) { }
virtual ~freebsd_smart_device() throw();
private:
int m_fd; ///< filedesc, -1 if not open.
- const char * m_mode; ///< Mode string for deviceopen().
};
#ifdef __GLIBC__
freebsd_ata_device::freebsd_ata_device(smart_interface * intf, const char * dev_name, const char * req_type)
: smart_device(intf, dev_name, "ata", req_type),
- freebsd_smart_device("ATA")
+ freebsd_smart_device()
{
}
}
if ((ccb.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
- cam_error_print(m_camdev, &ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr);
+ if(scsi_debugmode > 0)
+ cam_error_print(m_camdev, &ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr);
set_err(EIO);
return -1;
}
freebsd_escalade_device::freebsd_escalade_device(smart_interface * intf, const char * dev_name,
int escalade_type, int disknum)
: smart_device(intf, dev_name, "3ware", "3ware"),
- freebsd_smart_device(
- escalade_type==CONTROLLER_3WARE_9000_CHAR ? "ATA_3WARE_9000" :
- escalade_type==CONTROLLER_3WARE_678K_CHAR ? "ATA_3WARE_678K" :
- /* CONTROLLER_3WARE_678K */ "ATA" ),
+ freebsd_smart_device(),
m_escalade_type(escalade_type), m_disknum(disknum)
{
set_info().info_name = strprintf("%s [3ware_disk_%02d]", dev_name, disknum);
freebsd_highpoint_device::freebsd_highpoint_device(smart_interface * intf, const char * dev_name,
unsigned char controller, unsigned char channel, unsigned char port)
: smart_device(intf, dev_name, "hpt", "hpt"),
- freebsd_smart_device("ATA")
+ freebsd_smart_device()
{
m_hpt_data[0] = controller; m_hpt_data[1] = channel; m_hpt_data[2] = port;
set_info().info_name = strprintf("%s [hpt_disk_%u/%u/%u]", dev_name, m_hpt_data[0], m_hpt_data[1], m_hpt_data[2]);
virtual bool close();
private:
- int m_fd;
struct cam_device *m_camdev;
};
freebsd_scsi_device::freebsd_scsi_device(smart_interface * intf,
const char * dev_name, const char * req_type)
: smart_device(intf, dev_name, "scsi", req_type),
- freebsd_smart_device("SCSI")
+ freebsd_smart_device()
{
}
bool freebsd_scsi_device::scsi_pass_through(scsi_cmnd_io * iop)
{
- int report=scsi_debugmode;
union ccb *ccb;
- if (report > 0) {
+ if (scsi_debugmode) {
unsigned int k;
const unsigned char * ucp = iop->cmnd;
const char * np;
pout(" [%s: ", np ? np : "<unknown opcode>");
for (k = 0; k < iop->cmnd_len; ++k)
pout("%02x ", ucp[k]);
- if ((report > 1) &&
+ if ((scsi_debugmode > 1) &&
(DXFER_TO_DEVICE == iop->dxfer_dir) && (iop->dxferp)) {
int trunc = (iop->dxfer_len > 256) ? 1 : 0;
dStrHex(iop->dxferp, (trunc ? 256 : iop->dxfer_len) , 1);
}
else
- pout("]");
+ pout("]\n");
}
if(m_camdev==NULL) {
- warnx("error: camdev=0!");
- return -ENOTTY;
+ if (scsi_debugmode)
+ pout(" error: camdev=0!\n");
+ return set_err(ENOTTY);
}
if (!(ccb = cam_getccb(m_camdev))) {
- warnx("error allocating ccb");
- return -ENOMEM;
+ if (scsi_debugmode)
+ pout(" error allocating ccb\n");
+ return set_err(ENOMEM);
}
+
// mfi SAT layer is known to be buggy
if(!strcmp("mfi",m_camdev->sim_name)) {
if (iop->cmnd[0] == SAT_ATA_PASSTHROUGH_12 || iop->cmnd[0] == SAT_ATA_PASSTHROUGH_16) {
sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
cam_fill_csio(&ccb->csio,
- /*retrires*/ 1,
- /*cbfcnp*/ NULL,
+ /* retries */ 1,
+ /* cbfcnp */ NULL,
/* flags */ (iop->dxfer_dir == DXFER_NONE ? CAM_DIR_NONE :(iop->dxfer_dir == DXFER_FROM_DEVICE ? CAM_DIR_IN : CAM_DIR_OUT)),
/* tagaction */ MSG_SIMPLE_Q_TAG,
/* dataptr */ iop->dxferp,
memcpy(ccb->csio.cdb_io.cdb_bytes,iop->cmnd,iop->cmnd_len);
if (cam_send_ccb(m_camdev,ccb) < 0) {
- warn("error sending SCSI ccb");
- cam_error_print(m_camdev,ccb,CAM_ESF_ALL,CAM_EPF_ALL,stderr);
+ if (scsi_debugmode) {
+ pout(" error sending SCSI ccb\n");
+ cam_error_print(m_camdev,ccb,CAM_ESF_ALL,CAM_EPF_ALL,stderr);
+ }
cam_freeccb(ccb);
- return -EIO;
+ return set_err(EIO);
+ }
+
+ if (scsi_debugmode) {
+ pout(" CAM status=0x%x, SCSI status=0x%x, resid=0x%x\n",
+ ccb->ccb_h.status, ccb->csio.scsi_status, ccb->csio.resid);
+ if ((scsi_debugmode > 1) && (DXFER_FROM_DEVICE == iop->dxfer_dir)) {
+ int trunc, len;
+
+ len = iop->dxfer_len - ccb->csio.resid;
+ trunc = (len > 256) ? 1 : 0;
+ if (len > 0) {
+ pout(" Incoming data, len=%d%s:\n", len,
+ (trunc ? " [only first 256 bytes shown]" : ""));
+ dStrHex(iop->dxferp, (trunc ? 256 : len), 1);
+ }
+ else
+ pout(" Incoming data trimmed to nothing by resid\n");
+ }
}
if (((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) && ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_SCSI_STATUS_ERROR)) {
- cam_error_print(m_camdev,ccb,CAM_ESF_ALL,CAM_EPF_ALL,stderr);
+ if (scsi_debugmode)
+ cam_error_print(m_camdev,ccb,CAM_ESF_ALL,CAM_EPF_ALL,stderr);
cam_freeccb(ccb);
- return -EIO;
+ return set_err(EIO);
}
- if (iop->sensep) {
+ iop->resid = ccb->csio.resid;
+ iop->scsi_status = ccb->csio.scsi_status;
+ if (iop->sensep && (ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0) {
+ if (scsi_debugmode)
+ pout(" sense_len=0x%x, sense_resid=0x%x\n",
+ ccb->csio.sense_len, ccb->csio.sense_resid);
iop->resp_sense_len = ccb->csio.sense_len - ccb->csio.sense_resid;
- memcpy(iop->sensep,&(ccb->csio.sense_data),iop->resp_sense_len);
+ /* Some SCSI controller device drivers miscalculate the sense_resid
+ field so cap resp_sense_len on max_sense_len. */
+ if (iop->resp_sense_len > iop->max_sense_len)
+ iop->resp_sense_len = iop->max_sense_len;
+ if (iop->resp_sense_len > 0) {
+ memcpy(iop->sensep, &(ccb->csio.sense_data), iop->resp_sense_len);
+ if (scsi_debugmode) {
+ if (scsi_debugmode > 1) {
+ pout(" >>> Sense buffer, len=%zu:\n", iop->resp_sense_len);
+ dStrHex(iop->sensep, iop->resp_sense_len, 1);
+ }
+ if ((iop->sensep[0] & 0x7f) > 0x71)
+ pout(" status=0x%x: [desc] sense_key=0x%x asc=0x%x ascq=0x%x\n",
+ iop->scsi_status, iop->sensep[1] & 0xf,
+ iop->sensep[2], iop->sensep[3]);
+ else
+ pout(" status=0x%x: sense_key=0x%x asc=0x%x ascq=0x%x\n",
+ iop->scsi_status, iop->sensep[2] & 0xf,
+ iop->sensep[12], iop->sensep[13]);
+ }
+ }
+ else if (scsi_debugmode)
+ pout(" status=0x%x\n", iop->scsi_status);
}
-
- iop->scsi_status = ccb->csio.scsi_status;
+ else if (scsi_debugmode)
+ pout(" status=0x%x\n", iop->scsi_status);
cam_freeccb(ccb);
- if (report > 0) {
- int trunc;
-
- pout(" status=0\n");
- trunc = (iop->dxfer_len > 256) ? 1 : 0;
-
- pout(" Incoming data, len=%d%s:\n", (int)iop->dxfer_len,
- (trunc ? " [only first 256 bytes shown]" : ""));
- dStrHex(iop->dxferp, (trunc ? 256 : iop->dxfer_len) , 1);
- }
-
// mfip replacing PDT of the device so response does not make a sense
// this sets PDT to 00h - direct-access block device
if((!strcmp("mfi", m_camdev->sim_name) || !strcmp("mpt", m_camdev->sim_name))
&& iop->cmnd[0] == INQUIRY) {
- if (report > 0) {
- pout("device on %s controller, patching PDT\n", m_camdev->sim_name);
+ if (scsi_debugmode) {
+ pout(" device on %s controller, patching PDT\n", m_camdev->sim_name);
}
iop->dxferp[0] = iop->dxferp[0] & 0xe0;
}
// Areca RAID Controller(SATA Disk)
freebsd_areca_ata_device::freebsd_areca_ata_device(smart_interface * intf, const char * dev_name, int disknum, int encnum)
: smart_device(intf, dev_name, "areca", "areca"),
- freebsd_smart_device("ATA")
+ freebsd_smart_device()
{
set_disknum(disknum);
set_encnum(encnum);
// Areca RAID Controller(SAS Device)
freebsd_areca_scsi_device::freebsd_areca_scsi_device(smart_interface * intf, const char * dev_name, int disknum, int encnum)
: smart_device(intf, dev_name, "areca", "areca"),
- freebsd_smart_device("SCSI")
+ freebsd_smart_device()
{
set_disknum(disknum);
set_encnum(encnum);
freebsd_cciss_device::freebsd_cciss_device(smart_interface * intf,
const char * dev_name, unsigned char disknum)
: smart_device(intf, dev_name, "cciss", "cciss"),
- freebsd_smart_device("SCSI"),
+ freebsd_smart_device(),
m_disknum(disknum)
{
set_info().info_name = strprintf("%s [cciss_disk_%02d]", dev_name, disknum);
projects / mirror_smartmontools-debian.git / blobdiff