*
* Home page of code is: http://smartmontools.sourceforge.net
*
- * Copyright (C) 2003-8 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2003-8 Doug Gilbert <dougg@torque.net>
- * Copyright (C) 2008 Hank Wu <hank@areca.com.tw>
- * Copyright (C) 2008 Oliver Bock <brevilo@users.sourceforge.net>
- * Copyright (C) 2008-9 Christian Franke <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2008 Jordan Hargrave <jordan_hargrave@dell.com>
+ * Copyright (C) 2003-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2003-11 Doug Gilbert <dgilbert@interlog.com>
+ * Copyright (C) 2008-15 Christian Franke <smartmontools-support@lists.sourceforge.net>
*
- * Parts of this file are derived from code that was
+ * Original AACRaid code:
+ * Copyright (C) 2014 Raghava Aditya <raghava.aditya@pmcs.com>
+ *
+ * Original Areca code:
+ * Copyright (C) 2008-12 Hank Wu <hank@areca.com.tw>
+ * Copyright (C) 2008 Oliver Bock <brevilo@users.sourceforge.net>
+ *
+ * Original MegaRAID code:
+ * Copyright (C) 2008 Jordan Hargrave <jordan_hargrave@dell.com>
+ *
+ * 3ware code was derived from code that was:
*
* Written By: Adam Radford <linux@3ware.com>
* Modifications By: Joel Jacobson <linux@3ware.com>
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* Brad Strand <linux@3ware.com>
*
* Copyright (C) 1999-2003 3ware Inc.
#include <string.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
-#include <sys/file.h>
+#include <sys/utsname.h>
#include <unistd.h>
+#include <stddef.h> // for offsetof()
#include <sys/uio.h>
#include <sys/types.h>
+#include <dirent.h>
#ifndef makedev // old versions of types.h do not include sysmacros.h
#include <sys/sysmacros.h>
#endif
#include "int64.h"
#include "atacmds.h"
-#include "extern.h"
#include "os_linux.h"
#include "scsicmds.h"
#include "utility.h"
-#include "extern.h"
#include "cciss.h"
#include "megaraid.h"
+#include "aacraid.h"
#include "dev_interface.h"
#include "dev_ata_cmd_set.h"
+#include "dev_areca.h"
#ifndef ENOTSUP
#define ENOTSUP ENOSYS
#define ARGUSED(x) ((void)(x))
-const char *os_XXXX_c_cvsid="$Id: os_linux.cpp 2915 2009-09-18 21:17:37Z chrfranke $" \
-ATACMDS_H_CVSID CONFIG_H_CVSID INT64_H_CVSID OS_LINUX_H_CVSID SCSICMDS_H_CVSID UTILITY_H_CVSID;
-
-/* for passing global control variables */
-// (con->reportscsiioctl only)
-extern smartmonctrl *con;
-
+const char * os_linux_cpp_cvsid = "$Id: os_linux.cpp 4047 2015-03-22 16:16:24Z chrfranke $"
+ OS_LINUX_H_CVSID;
+extern unsigned char failuretest_permissive;
namespace os_linux { // No need to publish anything, name provided for Doxygen
int get_fd() const
{ return m_fd; }
+ void set_fd(int fd)
+ { m_fd = fd; }
+
private:
int m_fd; ///< filedesc, -1 if not open.
int m_flags; ///< Flags for ::open()
int m_retry_flags; ///< Flags to retry ::open(), -1 if no retry
};
-
linux_smart_device::~linux_smart_device() throw()
{
if (m_fd >= 0)
// examples for smartctl
static const char smartctl_examples[] =
"=================================================== SMARTCTL EXAMPLES =====\n\n"
- " smartctl --all /dev/hda (Prints all SMART information)\n\n"
- " smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda\n"
+ " smartctl --all /dev/sda (Prints all SMART information)\n\n"
+ " smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda\n"
" (Enables SMART on first disk)\n\n"
- " smartctl --test=long /dev/hda (Executes extended disk self-test)\n\n"
- " smartctl --attributes --log=selftest --quietmode=errorsonly /dev/hda\n"
+ " smartctl --test=long /dev/sda (Executes extended disk self-test)\n\n"
+ " smartctl --attributes --log=selftest --quietmode=errorsonly /dev/sda\n"
" (Prints Self-Test & Attribute errors)\n"
" smartctl --all --device=3ware,2 /dev/sda\n"
" smartctl --all --device=3ware,2 /dev/twe0\n"
" smartctl --all --device=3ware,2 /dev/twa0\n"
+ " smartctl --all --device=3ware,2 /dev/twl0\n"
" (Prints all SMART info for 3rd ATA disk on 3ware RAID controller)\n"
" smartctl --all --device=hpt,1/1/3 /dev/sda\n"
" (Prints all SMART info for the SATA disk attached to the 3rd PMPort\n"
" of the 1st channel on the 1st HighPoint RAID controller)\n"
- " smartctl --all --device=areca,3 /dev/sg2\n"
- " (Prints all SMART info for 3rd ATA disk on Areca RAID controller)\n"
+ " smartctl --all --device=areca,3/1 /dev/sg2\n"
+ " (Prints all SMART info for 3rd ATA disk of the 1st enclosure\n"
+ " on Areca RAID controller)\n"
;
-
/////////////////////////////////////////////////////////////////////////////
/// Linux ATA support
// 0 if the command succeeded and disk SMART status is "OK"
// 1 if the command succeeded and disk SMART status is "FAILING"
-
#define BUFFER_LENGTH (4+512)
int linux_ata_device::ata_command_interface(smart_command_set command, int select, char * data)
memcpy(task+sizeof(ide_task_request_t), data, 512);
if ((retval=ioctl(get_fd(), HDIO_DRIVE_TASKFILE, task))) {
- if (retval==-EINVAL)
+ if (errno==-EINVAL)
pout("Kernel lacks HDIO_DRIVE_TASKFILE support; compile kernel with CONFIG_IDE_TASKFILE_IO set\n");
return -1;
}
buff[5]=normal_hi;
if ((retval=ioctl(get_fd(), HDIO_DRIVE_TASK, buff))) {
- if (retval==-EINVAL) {
+ if (errno==-EINVAL) {
pout("Error SMART Status command via HDIO_DRIVE_TASK failed");
pout("Rebuild older linux 2.2 kernels with HDIO_DRIVE_TASK support added\n");
}
#define SG_IO_RESP_SENSE_LEN 64 /* large enough see buffer */
#define LSCSI_DRIVER_MASK 0xf /* mask out "suggestions" */
#define LSCSI_DRIVER_SENSE 0x8 /* alternate CHECK CONDITION indication */
+#define LSCSI_DID_ERROR 0x7 /* Need to work around aacraid driver quirk */
#define LSCSI_DRIVER_TIMEOUT 0x6
#define LSCSI_DID_TIME_OUT 0x3
#define LSCSI_DID_BUS_BUSY 0x2
}
}
- if (io_hdr.info | SG_INFO_CHECK) { /* error or warning */
+ if (io_hdr.info & SG_INFO_CHECK) { /* error or warning */
int masked_driver_status = (LSCSI_DRIVER_MASK & io_hdr.driver_status);
if (0 != io_hdr.host_status) {
(LSCSI_DID_TIME_OUT == io_hdr.host_status))
return -ETIMEDOUT;
else
- return -EIO; /* catch all */
+ /* Check for DID_ERROR - workaround for aacraid driver quirk */
+ if (LSCSI_DID_ERROR != io_hdr.host_status) {
+ return -EIO; /* catch all if not DID_ERR */
+ }
}
if (0 != masked_driver_status) {
if (LSCSI_DRIVER_TIMEOUT == masked_driver_status)
public /*extends*/ linux_smart_device
{
public:
- linux_scsi_device(smart_interface * intf, const char * dev_name, const char * req_type);
+ linux_scsi_device(smart_interface * intf, const char * dev_name,
+ const char * req_type, bool scanning = false);
virtual smart_device * autodetect_open();
virtual bool scsi_pass_through(scsi_cmnd_io * iop);
+
+private:
+ bool m_scanning; ///< true if created within scan_smart_devices
};
linux_scsi_device::linux_scsi_device(smart_interface * intf,
- const char * dev_name, const char * req_type)
+ const char * dev_name, const char * req_type, bool scanning /*= false*/)
: smart_device(intf, dev_name, "scsi", req_type),
- linux_smart_device(O_RDWR | O_NONBLOCK, O_RDONLY | O_NONBLOCK)
+ // If opened with O_RDWR, a SATA disk in standby mode
+ // may spin-up after device close().
+ linux_smart_device(O_RDONLY | O_NONBLOCK),
+ m_scanning(scanning)
{
}
-
bool linux_scsi_device::scsi_pass_through(scsi_cmnd_io * iop)
{
- int status = do_normal_scsi_cmnd_io(get_fd(), iop, con->reportscsiioctl);
+ int status = do_normal_scsi_cmnd_io(get_fd(), iop, scsi_debugmode);
if (status < 0)
return set_err(-status);
return true;
}
+/////////////////////////////////////////////////////////////////////////////
+/// PMC AacRAID support
+
+class linux_aacraid_device
+:public scsi_device,
+ public /*extends */ linux_smart_device
+{
+public:
+ linux_aacraid_device(smart_interface *intf, const char *dev_name,
+ unsigned int host, unsigned int channel, unsigned int device);
+
+ virtual ~linux_aacraid_device() throw();
+
+ virtual bool open();
+
+ virtual bool scsi_pass_through(scsi_cmnd_io *iop);
+
+private:
+ //Device Host number
+ int aHost;
+
+ //Channel(Lun) of the device
+ int aLun;
+
+ //Id of the device
+ int aId;
+
+};
+
+linux_aacraid_device::linux_aacraid_device(smart_interface *intf,
+ const char *dev_name, unsigned int host, unsigned int channel, unsigned int device)
+ : smart_device(intf,dev_name,"aacraid","aacraid"),
+ linux_smart_device(O_RDWR|O_NONBLOCK),
+ aHost(host), aLun(channel), aId(device)
+{
+ set_info().info_name = strprintf("%s [aacraid_disk_%02d_%02d_%d]",dev_name,aHost,aLun,aId);
+ set_info().dev_type = strprintf("aacraid,%d,%d,%d",aHost,aLun,aId);
+}
+
+linux_aacraid_device::~linux_aacraid_device() throw()
+{
+}
+
+bool linux_aacraid_device::open()
+{
+ //Create the character device name based on the host number
+ //Required for get stats from disks connected to different controllers
+ char dev_name[128];
+ snprintf(dev_name, sizeof(dev_name), "/dev/aac%d", aHost);
+
+ //Initial open of dev name to check if it exsists
+ int afd = ::open(dev_name,O_RDWR);
+
+ if(afd < 0 && errno == ENOENT) {
+
+ FILE *fp = fopen("/proc/devices","r");
+ if(NULL == fp)
+ return set_err(errno,"cannot open /proc/devices:%s",
+ strerror(errno));
+
+ char line[256];
+ int mjr = -1;
+
+ while(fgets(line,sizeof(line),fp) !=NULL) {
+ int nc = -1;
+ if(sscanf(line,"%d aac%n",&mjr,&nc) == 1
+ && nc > 0 && '\n' == line[nc])
+ break;
+ mjr = -1;
+ }
+
+ //work with /proc/devices is done
+ fclose(fp);
+
+ if (mjr < 0)
+ return set_err(ENOENT, "aac entry not found in /proc/devices");
+
+ //Create misc device file in /dev/ used for communication with driver
+ if(mknod(dev_name,S_IFCHR,makedev(mjr,aHost)))
+ return set_err(errno,"cannot create %s:%s",dev_name,strerror(errno));
+
+ afd = ::open(dev_name,O_RDWR);
+ }
+
+ if(afd < 0)
+ return set_err(errno,"cannot open %s:%s",dev_name,strerror(errno));
+
+ set_fd(afd);
+ return true;
+}
+
+bool linux_aacraid_device::scsi_pass_through(scsi_cmnd_io *iop)
+{
+ int report = scsi_debugmode;
+
+ if (report > 0) {
+ int k, j;
+ const unsigned char * ucp = iop->cmnd;
+ const char * np;
+ char buff[256];
+ const int sz = (int)sizeof(buff);
+
+ np = scsi_get_opcode_name(ucp[0]);
+ j = snprintf(buff, sz, " [%s: ", np ? np : "<unknown opcode>");
+ for (k = 0; k < (int)iop->cmnd_len; ++k)
+ j += snprintf(&buff[j], (sz > j ? (sz - j) : 0), "%02x ", ucp[k]);
+ if ((report > 1) &&
+ (DXFER_TO_DEVICE == iop->dxfer_dir) && (iop->dxferp)) {
+ int trunc = (iop->dxfer_len > 256) ? 1 : 0;
+
+ j += snprintf(&buff[j], (sz > j ? (sz - j) : 0), "]\n Outgoing "
+ "data, len=%d%s:\n", (int)iop->dxfer_len,
+ (trunc ? " [only first 256 bytes shown]" : ""));
+ dStrHex((const char *)iop->dxferp,
+ (trunc ? 256 : iop->dxfer_len) , 1);
+ }
+ else
+ j += snprintf(&buff[j], (sz > j ? (sz - j) : 0), "]\n");
+
+ pout("%s", buff);
+ }
+
+
+ //return test commands
+ if (iop->cmnd[0] == 0x00)
+ return true;
+
+ user_aac_reply *pReply;
+
+ #ifdef ENVIRONMENT64
+ // Create user 64 bit request
+ user_aac_srb64 *pSrb;
+ uint8_t aBuff[sizeof(user_aac_srb64) + sizeof(user_aac_reply)] = {0,};
+
+ pSrb = (user_aac_srb64*)aBuff;
+ pSrb->count = sizeof(user_aac_srb64) - sizeof(user_sgentry64);
+
+ #elif defined(ENVIRONMENT32)
+ //Create user 32 bit request
+ user_aac_srb32 *pSrb;
+ uint8_t aBuff[sizeof(user_aac_srb32) + sizeof(user_aac_reply)] = {0,};
+
+ pSrb = (user_aac_srb32*)aBuff;
+ pSrb->count = sizeof(user_aac_srb32) - sizeof(user_sgentry32);
+ #endif
+
+ pSrb->function = SRB_FUNCTION_EXECUTE_SCSI;
+ //channel is 0 always
+ pSrb->channel = 0;
+ pSrb->id = aId;
+ pSrb->lun = aLun;
+ pSrb->timeout = 0;
+
+ pSrb->retry_limit = 0;
+ pSrb->cdb_size = iop->cmnd_len;
+
+ switch(iop->dxfer_dir) {
+ case DXFER_NONE:
+ pSrb->flags = SRB_NoDataXfer;
+ break;
+ case DXFER_FROM_DEVICE:
+ pSrb->flags = SRB_DataIn;
+ break;
+ case DXFER_TO_DEVICE:
+ pSrb->flags = SRB_DataOut;
+ break;
+ default:
+ pout("aacraid: bad dxfer_dir\n");
+ return set_err(EINVAL, "aacraid: bad dxfer_dir\n");
+ }
+
+ if(iop->dxfer_len > 0) {
+
+ #ifdef ENVIRONMENT64
+ pSrb->sg64.count = 1;
+ pSrb->sg64.sg64[0].addr64.lo32 = ((intptr_t)iop->dxferp) &
+ 0x00000000ffffffff;
+ pSrb->sg64.sg64[0].addr64.hi32 = ((intptr_t)iop->dxferp) >> 32;
+
+ pSrb->sg64.sg64[0].length = (uint32_t)iop->dxfer_len;
+ pSrb->count += pSrb->sg64.count * sizeof(user_sgentry64);
+ #elif defined(ENVIRONMENT32)
+ pSrb->sg32.count = 1;
+ pSrb->sg32.sg32[0].addr32 = (intptr_t)iop->dxferp;
+
+ pSrb->sg32.sg32[0].length = (uint32_t)iop->dxfer_len;
+ pSrb->count += pSrb->sg32.count * sizeof(user_sgentry32);
+ #endif
+
+ }
+
+ pReply = (user_aac_reply*)(aBuff+pSrb->count);
+
+ memcpy(pSrb->cdb,iop->cmnd,iop->cmnd_len);
+
+ int rc = 0;
+ errno = 0;
+ rc = ioctl(get_fd(),FSACTL_SEND_RAW_SRB,pSrb);
+
+ if (rc != 0)
+ return set_err(errno, "aacraid send_raw_srb: %d.%d = %s",
+ aLun, aId, strerror(errno));
+
+/* see kernel aacraid.h and MSDN SCSI_REQUEST_BLOCK documentation */
+#define SRB_STATUS_SUCCESS 0x1
+#define SRB_STATUS_ERROR 0x4
+#define SRB_STATUS_NO_DEVICE 0x08
+#define SRB_STATUS_SELECTION_TIMEOUT 0x0a
+#define SRB_STATUS_AUTOSENSE_VALID 0x80
+
+ iop->scsi_status = pReply->scsi_status;
+
+ if (pReply->srb_status == (SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_ERROR)
+ && iop->scsi_status == SCSI_STATUS_CHECK_CONDITION) {
+ memcpy(iop->sensep, pReply->sense_data, pReply->sense_data_size);
+ iop->resp_sense_len = pReply->sense_data_size;
+ return true; /* request completed with sense data */
+ }
+
+ switch (pReply->srb_status & 0x3f) {
+
+ case SRB_STATUS_SUCCESS:
+ return true; /* request completed successfully */
+
+ case SRB_STATUS_NO_DEVICE:
+ return set_err(EIO, "aacraid: Device %d %d does not exist", aLun, aId);
+
+ case SRB_STATUS_SELECTION_TIMEOUT:
+ return set_err(EIO, "aacraid: Device %d %d not responding", aLun, aId);
+
+ default:
+ return set_err(EIO, "aacraid result: %d.%d = 0x%x",
+ aLun, aId, pReply->srb_status);
+ }
+}
+
+
/////////////////////////////////////////////////////////////////////////////
/// LSI MegaRAID support
virtual bool open();
virtual bool close();
-
+
virtual bool scsi_pass_through(scsi_cmnd_io *iop);
private:
int m_fd;
bool (linux_megaraid_device::*pt_cmd)(int cdblen, void *cdb, int dataLen, void *data,
- int senseLen, void *sense, int report);
+ int senseLen, void *sense, int report, int direction);
bool megasas_cmd(int cdbLen, void *cdb, int dataLen, void *data,
- int senseLen, void *sense, int report);
+ int senseLen, void *sense, int report, int direction);
bool megadev_cmd(int cdbLen, void *cdb, int dataLen, void *data,
- int senseLen, void *sense, int report);
+ int senseLen, void *sense, int report, int direction);
};
linux_megaraid_device::linux_megaraid_device(smart_interface *intf,
m_fd(-1), pt_cmd(0)
{
set_info().info_name = strprintf("%s [megaraid_disk_%02d]", dev_name, m_disknum);
+ set_info().dev_type = strprintf("megaraid,%d", tgt);
}
linux_megaraid_device::~linux_megaraid_device() throw()
smart_device * linux_megaraid_device::autodetect_open()
{
+ int report = scsi_debugmode;
+
// Open device
if (!open())
return this;
if (len < 36)
return this;
- printf("Got MegaRAID inquiry.. %s\n", req_buff+8);
+ if (report)
+ pout("Got MegaRAID inquiry.. %s\n", req_buff+8);
// Use INQUIRY to detect type
- smart_device * newdev = 0;
- try {
- // SAT or USB ?
- newdev = smi()->autodetect_sat_device(this, req_buff, len);
- if (newdev)
- // NOTE: 'this' is now owned by '*newdev'
+ {
+ // SAT?
+ ata_device * newdev = smi()->autodetect_sat_device(this, req_buff, len);
+ if (newdev) // NOTE: 'this' is now owned by '*newdev'
return newdev;
}
- catch (...) {
- // Cleanup if exception occurs after newdev was allocated
- delete newdev;
- throw;
- }
// Nothing special found
return this;
}
-
bool linux_megaraid_device::open()
{
char line[128];
- int mjr, n1;
- FILE *fp;
-
- if (!linux_smart_device::open())
- return false;
+ int mjr;
+ int report = scsi_debugmode;
- /* Get device HBA */
- struct sg_scsi_id sgid;
- if (ioctl(get_fd(), SG_GET_SCSI_ID, &sgid) == 0) {
- m_hba = sgid.host_no;
- }
- else if (ioctl(get_fd(), SCSI_IOCTL_GET_BUS_NUMBER, &m_hba) != 0) {
- int err = errno;
+ if(sscanf(get_dev_name(),"/dev/bus/%d", &m_hba) == 0) {
+ if (!linux_smart_device::open())
+ return false;
+ /* Get device HBA */
+ struct sg_scsi_id sgid;
+ if (ioctl(get_fd(), SG_GET_SCSI_ID, &sgid) == 0) {
+ m_hba = sgid.host_no;
+ }
+ else if (ioctl(get_fd(), SCSI_IOCTL_GET_BUS_NUMBER, &m_hba) != 0) {
+ int err = errno;
+ linux_smart_device::close();
+ return set_err(err, "can't get bus number");
+ } // we dont need this device anymore
linux_smart_device::close();
- return set_err(err, "can't get hba");
}
-
/* Perform mknod of device ioctl node */
- fp = fopen("/proc/devices", "r");
+ FILE * fp = fopen("/proc/devices", "r");
while (fgets(line, sizeof(line), fp) != NULL) {
- n1=0;
- if (sscanf(line, "%d megaraid_sas_ioctl%n", &mjr, &n1) == 1 && n1 == 22) {
- n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR, makedev(mjr, 0));
- printf("Creating /dev/megaraid_sas_ioctl_node = %d\n", n1 >= 0 ? 0 : errno);
- if (n1 >= 0 || errno == EEXIST)
- break;
- }
- else if (sscanf(line, "%d megadev%n", &mjr, &n1) == 1 && n1 == 11) {
- n1=mknod("/dev/megadev0", S_IFCHR, makedev(mjr, 0));
- printf("Creating /dev/megadev0 = %d\n", n1 >= 0 ? 0 : errno);
- if (n1 >= 0 || errno == EEXIST)
- break;
- }
+ int n1 = 0;
+ if (sscanf(line, "%d megaraid_sas_ioctl%n", &mjr, &n1) == 1 && n1 == 22) {
+ n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR, makedev(mjr, 0));
+ if(report > 0)
+ pout("Creating /dev/megaraid_sas_ioctl_node = %d\n", n1 >= 0 ? 0 : errno);
+ if (n1 >= 0 || errno == EEXIST)
+ break;
+ }
+ else if (sscanf(line, "%d megadev%n", &mjr, &n1) == 1 && n1 == 11) {
+ n1=mknod("/dev/megadev0", S_IFCHR, makedev(mjr, 0));
+ if(report > 0)
+ pout("Creating /dev/megadev0 = %d\n", n1 >= 0 ? 0 : errno);
+ if (n1 >= 0 || errno == EEXIST)
+ break;
+ }
}
fclose(fp);
linux_smart_device::close();
return set_err(err, "cannot open /dev/megaraid_sas_ioctl_node or /dev/megadev0");
}
-
+ set_fd(m_fd);
return true;
}
if (m_fd >= 0)
::close(m_fd);
m_fd = -1; m_hba = 0; pt_cmd = 0;
- return linux_smart_device::close();
+ set_fd(m_fd);
+ return true;
}
bool linux_megaraid_device::scsi_pass_through(scsi_cmnd_io *iop)
{
- int report = con->reportscsiioctl;
+ int report = scsi_debugmode;
if (report > 0) {
int k, j;
pout("%s", buff);
}
- /* Controller rejects Enable SMART and Test Unit Ready */
+ // Controller rejects Test Unit Ready
if (iop->cmnd[0] == 0x00)
return true;
- if (iop->cmnd[0] == 0x85 && iop->cmnd[1] == 0x06) {
- pout("Rejecting SMART/ATA command to controller\n");
- return true;
- }
+ if (iop->cmnd[0] == SAT_ATA_PASSTHROUGH_12 || iop->cmnd[0] == SAT_ATA_PASSTHROUGH_16) {
+ // Controller does not return ATA output registers in SAT sense data
+ if (iop->cmnd[2] & (1 << 5)) // chk_cond
+ return set_err(ENOSYS, "ATA return descriptor not supported by controller firmware");
+ }
+ // SMART WRITE LOG SECTOR causing media errors
+ if ((iop->cmnd[0] == SAT_ATA_PASSTHROUGH_16 // SAT16 WRITE LOG
+ && iop->cmnd[14] == ATA_SMART_CMD && iop->cmnd[3]==0 && iop->cmnd[4] == ATA_SMART_WRITE_LOG_SECTOR) ||
+ (iop->cmnd[0] == SAT_ATA_PASSTHROUGH_12 // SAT12 WRITE LOG
+ && iop->cmnd[9] == ATA_SMART_CMD && iop->cmnd[3] == ATA_SMART_WRITE_LOG_SECTOR))
+ {
+ if(!failuretest_permissive)
+ return set_err(ENOSYS, "SMART WRITE LOG SECTOR may cause problems, try with -T permissive to force");
+ }
if (pt_cmd == NULL)
return false;
- return (this->*pt_cmd)(iop->cmnd_len, iop->cmnd,
+ return (this->*pt_cmd)(iop->cmnd_len, iop->cmnd,
iop->dxfer_len, iop->dxferp,
- iop->max_sense_len, iop->sensep, report);
+ iop->max_sense_len, iop->sensep, report, iop->dxfer_dir);
}
/* Issue passthrough scsi command to PERC5/6 controllers */
bool linux_megaraid_device::megasas_cmd(int cdbLen, void *cdb,
int dataLen, void *data,
- int /*senseLen*/, void * /*sense*/, int /*report*/)
+ int /*senseLen*/, void * /*sense*/, int /*report*/, int dxfer_dir)
{
struct megasas_pthru_frame *pthru;
struct megasas_iocpacket uio;
int rc;
memset(&uio, 0, sizeof(uio));
- pthru = (struct megasas_pthru_frame *)uio.frame.raw;
+ pthru = &uio.frame.pthru;
pthru->cmd = MFI_CMD_PD_SCSI_IO;
pthru->cmd_status = 0xFF;
pthru->scsi_status = 0x0;
pthru->lun = 0;
pthru->cdb_len = cdbLen;
pthru->timeout = 0;
- pthru->flags = MFI_FRAME_DIR_READ;
- pthru->sge_count = 1;
- pthru->data_xfer_len = dataLen;
- pthru->sgl.sge32[0].phys_addr = (intptr_t)data;
- pthru->sgl.sge32[0].length = (uint32_t)dataLen;
+ switch (dxfer_dir) {
+ case DXFER_NONE:
+ pthru->flags = MFI_FRAME_DIR_NONE;
+ break;
+ case DXFER_FROM_DEVICE:
+ pthru->flags = MFI_FRAME_DIR_READ;
+ break;
+ case DXFER_TO_DEVICE:
+ pthru->flags = MFI_FRAME_DIR_WRITE;
+ break;
+ default:
+ pout("megasas_cmd: bad dxfer_dir\n");
+ return set_err(EINVAL, "megasas_cmd: bad dxfer_dir\n");
+ }
+
+ if (dataLen > 0) {
+ pthru->sge_count = 1;
+ pthru->data_xfer_len = dataLen;
+ pthru->sgl.sge32[0].phys_addr = (intptr_t)data;
+ pthru->sgl.sge32[0].length = (uint32_t)dataLen;
+ }
memcpy(pthru->cdb, cdb, cdbLen);
uio.host_no = m_hba;
- uio.sge_count = 1;
- uio.sgl_off = offsetof(struct megasas_pthru_frame, sgl);
- uio.sgl[0].iov_base = data;
- uio.sgl[0].iov_len = dataLen;
+ if (dataLen > 0) {
+ uio.sge_count = 1;
+ uio.sgl_off = offsetof(struct megasas_pthru_frame, sgl);
+ uio.sgl[0].iov_base = data;
+ uio.sgl[0].iov_len = dataLen;
+ }
rc = 0;
errno = 0;
/* Issue passthrough scsi commands to PERC2/3/4 controllers */
bool linux_megaraid_device::megadev_cmd(int cdbLen, void *cdb,
int dataLen, void *data,
- int senseLen, void *sense, int /*report*/)
+ int /*senseLen*/, void * /*sense*/, int /*report*/, int /* dir */)
{
struct uioctl_t uio;
int rc;
- sense = NULL;
- senseLen = 0;
-
/* Don't issue to the controller */
if (m_disknum == 7)
return false;
bool linux_cciss_device::scsi_pass_through(scsi_cmnd_io * iop)
{
- int status = cciss_io_interface(get_fd(), m_disknum, iop, con->reportscsiioctl);
+ int status = cciss_io_interface(get_fd(), m_disknum, iop, scsi_debugmode);
if (status < 0)
return set_err(-status);
return true;
enum escalade_type_t {
AMCC_3WARE_678K,
AMCC_3WARE_678K_CHAR,
- AMCC_3WARE_9000_CHAR
+ AMCC_3WARE_9000_CHAR,
+ AMCC_3WARE_9700_CHAR
};
linux_escalade_device(smart_interface * intf, const char * dev_name,
#define MAJOR_STRING_LENGTH 3
#define DEVICE_STRING_LENGTH 32
#define NODE_STRING_LENGTH 16
-int setup_3ware_nodes(const char *nodename, const char *driver_name) {
+static int setup_3ware_nodes(const char *nodename, const char *driver_name)
+{
int tw_major = 0;
int index = 0;
char majorstring[MAJOR_STRING_LENGTH+1];
int selinux_enforced = security_getenforce();
#endif
-
/* First try to open up /proc/devices */
if (!(file = fopen("/proc/devices", "r"))) {
pout("Error opening /proc/devices to check/create 3ware device nodes\n");
#endif
/* Now check if nodes are correct */
for (index=0; index<16; index++) {
- sprintf(nodestring, "/dev/%s%d", nodename, index);
+ snprintf(nodestring, sizeof(nodestring), "/dev/%s%d", nodename, index);
#ifdef WITH_SELINUX
/* Get context of the node and set it as the default */
if (selinux_enabled) {
bool linux_escalade_device::open()
{
- if (m_escalade_type == AMCC_3WARE_9000_CHAR || m_escalade_type == AMCC_3WARE_678K_CHAR) {
+ if (m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR ||
+ m_escalade_type == AMCC_3WARE_678K_CHAR) {
// the device nodes for these controllers are dynamically assigned,
// so we need to check that they exist with the correct major
// numbers and if not, create them
- const char * node = (m_escalade_type == AMCC_3WARE_9000_CHAR ? "twa" : "twe" );
- const char * driver = (m_escalade_type == AMCC_3WARE_9000_CHAR ? "3w-9xxx": "3w-xxxx");
+ const char * node = (m_escalade_type == AMCC_3WARE_9700_CHAR ? "twl" :
+ m_escalade_type == AMCC_3WARE_9000_CHAR ? "twa" :
+ "twe" );
+ const char * driver = (m_escalade_type == AMCC_3WARE_9700_CHAR ? "3w-sas" :
+ m_escalade_type == AMCC_3WARE_9000_CHAR ? "3w-9xxx" :
+ "3w-xxxx" );
if (setup_3ware_nodes(node, driver))
return set_err((errno ? errno : ENXIO), "setup_3ware_nodes(\"%s\", \"%s\") failed", node, driver);
}
// 0 if the command succeeded and disk SMART status is "OK"
// 1 if the command succeeded and disk SMART status is "FAILING"
-
/* 512 is the max payload size: increase if needed */
#define BUFFER_LEN_678K ( sizeof(TW_Ioctl) ) // 1044 unpacked, 1041 packed
#define BUFFER_LEN_678K_CHAR ( sizeof(TW_New_Ioctl)+512-1 ) // 1539 unpacked, 1536 packed
memset(ioctl_buffer, 0, TW_IOCTL_BUFFER_SIZE);
// TODO: Handle controller differences by different classes
- if (m_escalade_type==AMCC_3WARE_9000_CHAR) {
+ if (m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR) {
tw_ioctl_apache = (TW_Ioctl_Buf_Apache *)ioctl_buffer;
tw_ioctl_apache->driver_command.control_code = TW_IOCTL_FIRMWARE_PASS_THROUGH;
tw_ioctl_apache->driver_command.buffer_length = 512; /* payload size */
// in dwords by 1 to account for the 64-bit single sgl 'address'
// field. Note that this doesn't agree with the typedefs but it's
// right (agree with kernel driver behavior/typedefs).
- if (m_escalade_type==AMCC_3WARE_9000_CHAR && sizeof(long)==8)
+ if ((m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR)
+ && sizeof(long) == 8)
passthru->size++;
}
else if (in.direction == ata_cmd_in::no_data) {
passthru->sector_count = 0x0;
}
else if (in.direction == ata_cmd_in::data_out) {
- if (m_escalade_type == AMCC_3WARE_9000_CHAR)
+ if (m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR)
memcpy(tw_ioctl_apache->data_buffer, in.buffer, in.size);
else if (m_escalade_type == AMCC_3WARE_678K_CHAR)
memcpy(tw_ioctl_char->data_buffer, in.buffer, in.size);
passthru->byte0.sgloff = 0x5;
passthru->size = 0x7; // TODO: Other value for multi-sector ?
passthru->param = 0xF; // PIO data write
- if (m_escalade_type==AMCC_3WARE_9000_CHAR && sizeof(long)==8)
+ if ((m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR)
+ && sizeof(long) == 8)
passthru->size++;
}
else
- set_err(EINVAL);
+ return set_err(EINVAL);
// Now send the command down through an ioctl()
int ioctlreturn;
- if (m_escalade_type==AMCC_3WARE_9000_CHAR)
+ if (m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR)
ioctlreturn=ioctl(get_fd(), TW_IOCTL_FIRMWARE_PASS_THROUGH, tw_ioctl_apache);
else if (m_escalade_type==AMCC_3WARE_678K_CHAR)
ioctlreturn=ioctl(get_fd(), TW_CMD_PACKET_WITH_DATA, tw_ioctl_char);
// If this is a read data command, copy data to output buffer
if (readdata) {
- if (m_escalade_type==AMCC_3WARE_9000_CHAR)
+ if (m_escalade_type == AMCC_3WARE_9700_CHAR || m_escalade_type == AMCC_3WARE_9000_CHAR)
memcpy(in.buffer, tw_ioctl_apache->data_buffer, in.size);
else if (m_escalade_type==AMCC_3WARE_678K_CHAR)
memcpy(in.buffer, tw_ioctl_char->data_buffer, in.size);
}
// Return register values
- {
+ if (passthru) {
ata_out_regs_48bit & r = out.out_regs;
r.error = passthru->features;
r.sector_count_16 = passthru->sector_count;
// look for nonexistent devices/ports
if ( in.in_regs.command == ATA_IDENTIFY_DEVICE
- && !nonempty((unsigned char *)in.buffer, in.size)) {
+ && !nonempty(in.buffer, in.size)) {
return set_err(ENODEV, "No drive on port %d", m_disknum);
}
return true;
}
-
/////////////////////////////////////////////////////////////////////////////
/// Areca RAID support
-class linux_areca_device
-: public /*implements*/ ata_device_with_command_set,
+///////////////////////////////////////////////////////////////////
+// SATA(ATA) device behind Areca RAID Controller
+class linux_areca_ata_device
+: public /*implements*/ areca_ata_device,
public /*extends*/ linux_smart_device
{
public:
- linux_areca_device(smart_interface * intf, const char * dev_name, int disknum);
-
-protected:
- virtual int ata_command_interface(smart_command_set command, int select, char * data);
-
-private:
- int m_disknum; ///< Disk number.
+ linux_areca_ata_device(smart_interface * intf, const char * dev_name, int disknum, int encnum = 1);
+ virtual smart_device * autodetect_open();
+ virtual bool arcmsr_lock();
+ virtual bool arcmsr_unlock();
+ virtual int arcmsr_do_scsi_io(struct scsi_cmnd_io * iop);
};
-
-// PURPOSE
-// This is an interface routine meant to isolate the OS dependent
-// parts of the code, and to provide a debugging interface. Each
-// different port and OS needs to provide it's own interface. This
-// is the linux interface to the Areca "arcmsr" driver. It allows ATA
-// commands to be passed through the SCSI driver.
-// DETAILED DESCRIPTION OF ARGUMENTS
-// fd: is the file descriptor provided by open()
-// disknum is the disk number (0 to 15) in the RAID array
-// command: defines the different operations.
-// select: additional input data if needed (which log, which type of
-// self-test).
-// data: location to write output data, if needed (512 bytes).
-// Note: not all commands use all arguments.
-// RETURN VALUES
-// -1 if the command failed
-// 0 if the command succeeded,
-// STATUS_CHECK routine:
-// -1 if the command failed
-// 0 if the command succeeded and disk SMART status is "OK"
-// 1 if the command succeeded and disk SMART status is "FAILING"
-
-
-/*DeviceType*/
-#define ARECA_SATA_RAID 0x90000000
-/*FunctionCode*/
-#define FUNCTION_READ_RQBUFFER 0x0801
-#define FUNCTION_WRITE_WQBUFFER 0x0802
-#define FUNCTION_CLEAR_RQBUFFER 0x0803
-#define FUNCTION_CLEAR_WQBUFFER 0x0804
-
-/* ARECA IO CONTROL CODE*/
-#define ARCMSR_IOCTL_READ_RQBUFFER (ARECA_SATA_RAID | FUNCTION_READ_RQBUFFER)
-#define ARCMSR_IOCTL_WRITE_WQBUFFER (ARECA_SATA_RAID | FUNCTION_WRITE_WQBUFFER)
-#define ARCMSR_IOCTL_CLEAR_RQBUFFER (ARECA_SATA_RAID | FUNCTION_CLEAR_RQBUFFER)
-#define ARCMSR_IOCTL_CLEAR_WQBUFFER (ARECA_SATA_RAID | FUNCTION_CLEAR_WQBUFFER)
-#define ARECA_SIG_STR "ARCMSR"
-
-// The SRB_IO_CONTROL & SRB_BUFFER structures are used to communicate(to/from) to areca driver
-typedef struct _SRB_IO_CONTROL
-{
- unsigned int HeaderLength;
- unsigned char Signature[8];
- unsigned int Timeout;
- unsigned int ControlCode;
- unsigned int ReturnCode;
- unsigned int Length;
-} sSRB_IO_CONTROL;
-
-typedef struct _SRB_BUFFER
+///////////////////////////////////////////////////////////////////
+// SAS(SCSI) device behind Areca RAID Controller
+class linux_areca_scsi_device
+: public /*implements*/ areca_scsi_device,
+ public /*extends*/ linux_smart_device
{
- sSRB_IO_CONTROL srbioctl;
- unsigned char ioctldatabuffer[1032]; // the buffer to put the command data to/from firmware
-} sSRB_BUFFER;
+public:
+ linux_areca_scsi_device(smart_interface * intf, const char * dev_name, int disknum, int encnum = 1);
+ virtual smart_device * autodetect_open();
+ virtual bool arcmsr_lock();
+ virtual bool arcmsr_unlock();
+ virtual int arcmsr_do_scsi_io(struct scsi_cmnd_io * iop);
+};
// Looks in /proc/scsi to suggest correct areca devices
-// If hint not NULL, return device path guess
-int find_areca_in_proc(char *hint) {
-
+static int find_areca_in_proc()
+{
const char* proc_format_string="host\tchan\tid\tlun\ttype\topens\tqdepth\tbusy\tonline\n";
// check data formwat
dev++;
if (id == 16 && type == 3) {
// devices with id=16 and type=3 might be Areca controllers
- if (!found && hint) {
- sprintf(hint, "/dev/sg%d", dev);
- }
pout("Device /dev/sg%d appears to be an Areca controller.\n", dev);
found++;
}
return 0;
}
-
-
-void dumpdata( unsigned char *block, int len)
-{
- int ln = (len / 16) + 1; // total line#
- unsigned char c;
- int pos = 0;
-
- printf(" Address = %p, Length = (0x%x)%d\n", block, len, len);
- printf(" 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII \n");
- printf("=====================================================================\n");
-
- for ( int l = 0; l < ln && len; l++ )
- {
- // printf the line# and the HEX data
- // if a line data length < 16 then append the space to the tail of line to reach 16 chars
- printf("%02X | ", l);
- for ( pos = 0; pos < 16 && len; pos++, len-- )
- {
- c = block[l*16+pos];
- printf("%02X ", c);
- }
-
- if ( pos < 16 )
- {
- for ( int loop = pos; loop < 16; loop++ )
- {
- printf(" ");
- }
- }
-
- // print ASCII char
- for ( int loop = 0; loop < pos; loop++ )
- {
- c = block[l*16+loop];
- if ( c >= 0x20 && c <= 0x7F )
- {
- printf("%c", c);
- }
- else
- {
- printf(".");
- }
- }
- printf("\n");
- }
- printf("=====================================================================\n");
+// Areca RAID Controller(SATA Disk)
+linux_areca_ata_device::linux_areca_ata_device(smart_interface * intf, const char * dev_name, int disknum, int encnum)
+: smart_device(intf, dev_name, "areca", "areca"),
+ linux_smart_device(O_RDWR | O_EXCL | O_NONBLOCK)
+{
+ set_disknum(disknum);
+ set_encnum(encnum);
+ set_info().info_name = strprintf("%s [areca_disk#%02d_enc#%02d]", dev_name, disknum, encnum);
}
+smart_device * linux_areca_ata_device::autodetect_open()
+{
+ int is_ata = 1;
+ // autodetect device type
+ is_ata = arcmsr_get_dev_type();
+ if(is_ata < 0)
+ {
+ set_err(EIO);
+ return this;
+ }
-int arcmsr_command_handler(int fd, unsigned long arcmsr_cmd, unsigned char *data, int data_len, void *ext_data /* reserved for further use */)
-{
- ARGUSED(ext_data);
-
- int ioctlreturn = 0;
- sSRB_BUFFER sBuf;
- struct scsi_cmnd_io io_hdr;
- int dir = DXFER_TO_DEVICE;
-
- UINT8 cdb[10];
- UINT8 sense[32];
-
- unsigned char *areca_return_packet;
- int total = 0;
- int expected = -1;
- unsigned char return_buff[2048];
- unsigned char *ptr = &return_buff[0];
- memset(return_buff, 0, sizeof(return_buff));
-
- memset((unsigned char *)&sBuf, 0, sizeof(sBuf));
- memset(&io_hdr, 0, sizeof(io_hdr));
- memset(cdb, 0, sizeof(cdb));
- memset(sense, 0, sizeof(sense));
-
-
- sBuf.srbioctl.HeaderLength = sizeof(sSRB_IO_CONTROL);
- memcpy(sBuf.srbioctl.Signature, ARECA_SIG_STR, strlen(ARECA_SIG_STR));
- sBuf.srbioctl.Timeout = 10000;
- sBuf.srbioctl.ControlCode = ARCMSR_IOCTL_READ_RQBUFFER;
-
- switch ( arcmsr_cmd )
- {
- // command for writing data to driver
- case ARCMSR_IOCTL_WRITE_WQBUFFER:
- if ( data && data_len )
- {
- sBuf.srbioctl.Length = data_len;
- memcpy((unsigned char *)sBuf.ioctldatabuffer, (unsigned char *)data, data_len);
- }
- // commands for clearing related buffer of driver
- case ARCMSR_IOCTL_CLEAR_RQBUFFER:
- case ARCMSR_IOCTL_CLEAR_WQBUFFER:
- cdb[0] = 0x3B; //SCSI_WRITE_BUF command;
- break;
- // command for reading data from driver
- case ARCMSR_IOCTL_READ_RQBUFFER:
- cdb[0] = 0x3C; //SCSI_READ_BUF command;
- dir = DXFER_FROM_DEVICE;
- break;
- default:
- // unknown arcmsr commands
- return -1;
- }
+ if(is_ata == 1)
+ {
+ // SATA device
+ return this;
+ }
- cdb[1] = 0x01;
- cdb[2] = 0xf0;
- //
- // cdb[5][6][7][8] areca defined command code( to/from driver )
- //
- cdb[5] = (char)( arcmsr_cmd >> 24);
- cdb[6] = (char)( arcmsr_cmd >> 16);
- cdb[7] = (char)( arcmsr_cmd >> 8);
- cdb[8] = (char)( arcmsr_cmd & 0x0F );
-
- io_hdr.dxfer_dir = dir;
- io_hdr.dxfer_len = sizeof(sBuf);
- io_hdr.dxferp = (unsigned char *)&sBuf;
- io_hdr.cmnd = cdb;
- io_hdr.cmnd_len = sizeof(cdb);
- io_hdr.sensep = sense;
- io_hdr.max_sense_len = sizeof(sense);
- io_hdr.timeout = SCSI_TIMEOUT_DEFAULT;
-
- while ( 1 )
- {
- ioctlreturn = do_normal_scsi_cmnd_io(fd, &io_hdr, 0);
- if ( ioctlreturn || io_hdr.scsi_status )
- {
- // errors found
- break;
- }
-
- if ( arcmsr_cmd != ARCMSR_IOCTL_READ_RQBUFFER )
- {
- // if succeeded, just returns the length of outgoing data
- return data_len;
- }
-
- if ( sBuf.srbioctl.Length )
- {
- //dumpdata(&sBuf.ioctldatabuffer[0], sBuf.srbioctl.Length);
- memcpy(ptr, &sBuf.ioctldatabuffer[0], sBuf.srbioctl.Length);
- ptr += sBuf.srbioctl.Length;
- total += sBuf.srbioctl.Length;
- // the returned bytes enough to compute payload length ?
- if ( expected < 0 && total >= 5 )
- {
- areca_return_packet = (unsigned char *)&return_buff[0];
- if ( areca_return_packet[0] == 0x5E &&
- areca_return_packet[1] == 0x01 &&
- areca_return_packet[2] == 0x61 )
- {
- // valid header, let's compute the returned payload length,
- // we expected the total length is
- // payload + 3 bytes header + 2 bytes length + 1 byte checksum
- expected = areca_return_packet[4] * 256 + areca_return_packet[3] + 6;
- }
- }
-
- if ( total >= 7 && total >= expected )
- {
- //printf("total bytes received = %d, expected length = %d\n", total, expected);
-
- // ------ Okay! we received enough --------
- break;
- }
- }
- }
+ // SAS device
+ smart_device_auto_ptr newdev(new linux_areca_scsi_device(smi(), get_dev_name(), get_disknum(), get_encnum()));
+ close();
+ delete this;
+ newdev->open(); // TODO: Can possibly pass open fd
- // Deal with the different error cases
- if ( ioctlreturn )
- {
- printf("do_scsi_cmnd_io with write buffer failed code = %x\n", ioctlreturn);
- return -2;
- }
+ return newdev.release();
+}
+int linux_areca_ata_device::arcmsr_do_scsi_io(struct scsi_cmnd_io * iop)
+{
+ int ioctlreturn = 0;
- if ( io_hdr.scsi_status )
- {
- printf("io_hdr.scsi_status with write buffer failed code = %x\n", io_hdr.scsi_status);
- return -3;
- }
+ if(!is_open()) {
+ if(!open()){
+ find_areca_in_proc();
+ }
+ }
+ ioctlreturn = do_normal_scsi_cmnd_io(get_fd(), iop, scsi_debugmode);
+ if ( ioctlreturn || iop->scsi_status )
+ {
+ // errors found
+ return -1;
+ }
- if ( data )
- {
- memcpy(data, return_buff, total);
- }
+ return ioctlreturn;
+}
- return total;
+bool linux_areca_ata_device::arcmsr_lock()
+{
+ return true;
}
+bool linux_areca_ata_device::arcmsr_unlock()
+{
+ return true;
+}
-linux_areca_device::linux_areca_device(smart_interface * intf, const char * dev_name, int disknum)
+// Areca RAID Controller(SAS Device)
+linux_areca_scsi_device::linux_areca_scsi_device(smart_interface * intf, const char * dev_name, int disknum, int encnum)
: smart_device(intf, dev_name, "areca", "areca"),
- linux_smart_device(O_RDWR | O_EXCL | O_NONBLOCK),
- m_disknum(disknum)
+ linux_smart_device(O_RDWR | O_EXCL | O_NONBLOCK)
{
- set_info().info_name = strprintf("%s [areca_%02d]", dev_name, disknum);
+ set_disknum(disknum);
+ set_encnum(encnum);
+ set_info().info_name = strprintf("%s [areca_disk#%02d_enc#%02d]", dev_name, disknum, encnum);
}
-// Areca RAID Controller
-int linux_areca_device::ata_command_interface(smart_command_set command, int select, char * data)
-{
- // ATA input registers
- typedef struct _ATA_INPUT_REGISTERS
- {
- unsigned char features;
- unsigned char sector_count;
- unsigned char sector_number;
- unsigned char cylinder_low;
- unsigned char cylinder_high;
- unsigned char device_head;
- unsigned char command;
- unsigned char reserved[8];
- unsigned char data[512]; // [in/out] buffer for outgoing/incoming data
- } sATA_INPUT_REGISTERS;
-
- // ATA output registers
- // Note: The output registers is re-sorted for areca internal use only
- typedef struct _ATA_OUTPUT_REGISTERS
- {
- unsigned char error;
- unsigned char status;
- unsigned char sector_count;
- unsigned char sector_number;
- unsigned char cylinder_low;
- unsigned char cylinder_high;
- }sATA_OUTPUT_REGISTERS;
-
- // Areca packet format for outgoing:
- // B[0~2] : 3 bytes header, fixed value 0x5E, 0x01, 0x61
- // B[3~4] : 2 bytes command length + variant data length, little endian
- // B[5] : 1 bytes areca defined command code, ATA passthrough command code is 0x1c
- // B[6~last-1] : variant bytes payload data
- // B[last] : 1 byte checksum, simply sum(B[3] ~ B[last -1])
- //
- //
- // header 3 bytes length 2 bytes cmd 1 byte payload data x bytes cs 1 byte
- // +--------------------------------------------------------------------------------+
- // + 0x5E 0x01 0x61 | 0x00 0x00 | 0x1c | .................... | 0x00 |
- // +--------------------------------------------------------------------------------+
- //
-
- //Areca packet format for incoming:
- // B[0~2] : 3 bytes header, fixed value 0x5E, 0x01, 0x61
- // B[3~4] : 2 bytes payload length, little endian
- // B[5~last-1] : variant bytes returned payload data
- // B[last] : 1 byte checksum, simply sum(B[3] ~ B[last -1])
- //
- //
- // header 3 bytes length 2 bytes payload data x bytes cs 1 byte
- // +-------------------------------------------------------------------+
- // + 0x5E 0x01 0x61 | 0x00 0x00 | .................... | 0x00 |
- // +-------------------------------------------------------------------+
- unsigned char areca_packet[640];
- int areca_packet_len = sizeof(areca_packet);
- unsigned char cs = 0;
-
- sATA_INPUT_REGISTERS *ata_cmd;
-
- // For debugging
-#if 0
- memset(sInq, 0, sizeof(sInq));
- scsiStdInquiry(fd, (unsigned char *)sInq, (int)sizeof(sInq));
- dumpdata((unsigned char *)sInq, sizeof(sInq));
-#endif
- memset(areca_packet, 0, areca_packet_len);
-
- // ----- BEGIN TO SETUP HEADERS -------
- areca_packet[0] = 0x5E;
- areca_packet[1] = 0x01;
- areca_packet[2] = 0x61;
- areca_packet[3] = (unsigned char)((areca_packet_len - 6) & 0xff);
- areca_packet[4] = (unsigned char)(((areca_packet_len - 6) >> 8) & 0xff);
- areca_packet[5] = 0x1c; // areca defined code for ATA passthrough command
-
-
- // ----- BEGIN TO SETUP PAYLOAD DATA -----
-
- memcpy(&areca_packet[7], "SmrT", 4); // areca defined password
-
- ata_cmd = (sATA_INPUT_REGISTERS *)&areca_packet[12];
- ata_cmd->cylinder_low = 0x4F;
- ata_cmd->cylinder_high = 0xC2;
-
-
- if ( command == READ_VALUES ||
- command == READ_THRESHOLDS ||
- command == READ_LOG ||
- command == IDENTIFY ||
- command == PIDENTIFY )
- {
- // the commands will return data
- areca_packet[6] = 0x13;
- ata_cmd->sector_count = 0x1;
- }
- else if ( command == WRITE_LOG )
- {
- // the commands will write data
- areca_packet[6] = 0x14;
- }
- else
- {
- // the commands will return no data
- areca_packet[6] = 0x15;
- }
-
-
- ata_cmd->command = ATA_SMART_CMD;
- // Now set ATA registers depending upon command
- switch ( command )
- {
- case CHECK_POWER_MODE:
- //printf("command = CHECK_POWER_MODE\n");
- ata_cmd->command = ATA_CHECK_POWER_MODE;
- break;
- case READ_VALUES:
- //printf("command = READ_VALUES\n");
- ata_cmd->features = ATA_SMART_READ_VALUES;
- break;
- case READ_THRESHOLDS:
- //printf("command = READ_THRESHOLDS\n");
- ata_cmd->features = ATA_SMART_READ_THRESHOLDS;
- break;
- case READ_LOG:
- //printf("command = READ_LOG\n");
- ata_cmd->features = ATA_SMART_READ_LOG_SECTOR;
- ata_cmd->sector_number = select;
- break;
- case WRITE_LOG:
- //printf("command = WRITE_LOG\n");
- ata_cmd->features = ATA_SMART_WRITE_LOG_SECTOR;
- memcpy(ata_cmd->data, data, 512);
- ata_cmd->sector_count = 1;
- ata_cmd->sector_number = select;
- break;
- case IDENTIFY:
- //printf("command = IDENTIFY\n");
- ata_cmd->command = ATA_IDENTIFY_DEVICE;
- break;
- case PIDENTIFY:
- //printf("command = PIDENTIFY\n");
- errno=ENODEV;
- return -1;
- case ENABLE:
- //printf("command = ENABLE\n");
- ata_cmd->features = ATA_SMART_ENABLE;
- break;
- case DISABLE:
- //printf("command = DISABLE\n");
- ata_cmd->features = ATA_SMART_DISABLE;
- break;
- case AUTO_OFFLINE:
- //printf("command = AUTO_OFFLINE\n");
- ata_cmd->features = ATA_SMART_AUTO_OFFLINE;
- // Enable or disable?
- ata_cmd->sector_count = select;
- break;
- case AUTOSAVE:
- //printf("command = AUTOSAVE\n");
- ata_cmd->features = ATA_SMART_AUTOSAVE;
- // Enable or disable?
- ata_cmd->sector_count = select;
- break;
- case IMMEDIATE_OFFLINE:
- //printf("command = IMMEDIATE_OFFLINE\n");
- ata_cmd->features = ATA_SMART_IMMEDIATE_OFFLINE;
- // What test type to run?
- ata_cmd->sector_number = select;
- break;
- case STATUS_CHECK:
- //printf("command = STATUS_CHECK\n");
- ata_cmd->features = ATA_SMART_STATUS;
- break;
- case STATUS:
- //printf("command = STATUS\n");
- ata_cmd->features = ATA_SMART_STATUS;
- break;
- default:
- //printf("command = UNKNOWN\n");
- errno=ENOSYS;
- return -1;
- };
-
- areca_packet[11] = m_disknum - 1; // drive number
-
- // ----- BEGIN TO SETUP CHECKSUM -----
- for ( int loop = 3; loop < areca_packet_len - 1; loop++ )
- {
- cs += areca_packet[loop];
- }
- areca_packet[areca_packet_len-1] = cs;
-
- // ----- BEGIN TO SEND TO ARECA DRIVER ------
- int expected = 0;
- unsigned char return_buff[2048];
- memset(return_buff, 0, sizeof(return_buff));
-
- expected = arcmsr_command_handler(get_fd(), ARCMSR_IOCTL_CLEAR_RQBUFFER, NULL, 0, NULL);
- if (expected==-3) {
- find_areca_in_proc(NULL);
- return -1;
- }
-
- expected = arcmsr_command_handler(get_fd(), ARCMSR_IOCTL_CLEAR_WQBUFFER, NULL, 0, NULL);
- expected = arcmsr_command_handler(get_fd(), ARCMSR_IOCTL_WRITE_WQBUFFER, areca_packet, areca_packet_len, NULL);
- if ( expected > 0 )
- {
- expected = arcmsr_command_handler(get_fd(), ARCMSR_IOCTL_READ_RQBUFFER, return_buff, sizeof(return_buff), NULL);
- }
- if ( expected < 0 )
- {
- return -1;
- }
-
- // ----- VERIFY THE CHECKSUM -----
- cs = 0;
- for ( int loop = 3; loop < expected - 1; loop++ )
- {
- cs += return_buff[loop];
- }
-
- if ( return_buff[expected - 1] != cs )
- {
- errno = EIO;
- return -1;
- }
+smart_device * linux_areca_scsi_device::autodetect_open()
+{
+ return this;
+}
- sATA_OUTPUT_REGISTERS *ata_out = (sATA_OUTPUT_REGISTERS *)&return_buff[5] ;
- if ( ata_out->status )
- {
- if ( command == IDENTIFY )
- {
- pout("The firmware of your Areca RAID controller appears to be outdated!\n" \
- "Please update your controller to firmware version 1.46 or later.\n" \
- "You may download it here: ftp://ftp.areca.com.tw/RaidCards/BIOS_Firmware\n\n");
- }
- errno = EIO;
- return -1;
- }
+int linux_areca_scsi_device::arcmsr_do_scsi_io(struct scsi_cmnd_io * iop)
+{
+ int ioctlreturn = 0;
- // returns with data
- if ( command == READ_VALUES ||
- command == READ_THRESHOLDS ||
- command == READ_LOG ||
- command == IDENTIFY ||
- command == PIDENTIFY )
- {
- memcpy(data, &return_buff[7], 512);
- }
+ if(!is_open()) {
+ if(!open()){
+ find_areca_in_proc();
+ }
+ }
- if ( command == CHECK_POWER_MODE )
- {
- data[0] = ata_out->sector_count;
- }
+ ioctlreturn = do_normal_scsi_cmnd_io(get_fd(), iop, scsi_debugmode);
+ if ( ioctlreturn || iop->scsi_status )
+ {
+ // errors found
+ return -1;
+ }
- if ( command == STATUS_CHECK &&
- ( ata_out->cylinder_low == 0xF4 && ata_out->cylinder_high == 0x2C ) )
- {
- return 1;
- }
+ return ioctlreturn;
+}
- return 0;
+bool linux_areca_scsi_device::arcmsr_lock()
+{
+ return true;
}
+bool linux_areca_scsi_device::arcmsr_unlock()
+{
+ return true;
+}
/////////////////////////////////////////////////////////////////////////////
/// Marvell support
return 0;
}
-
/////////////////////////////////////////////////////////////////////////////
/// Highpoint RAID support
if (command==WRITE_LOG) {
unsigned char task[4*sizeof(int)+sizeof(ide_task_request_t)+512];
- unsigned int *hpt = (unsigned int *)task;
+ unsigned int *hpt_tf = (unsigned int *)task;
ide_task_request_t *reqtask = (ide_task_request_t *)(&task[4*sizeof(int)]);
task_struct_t *taskfile = (task_struct_t *)reqtask->io_ports;
int retval;
memset(task, 0, sizeof(task));
- hpt[0] = m_hpt_data[0]; // controller id
- hpt[1] = m_hpt_data[1]; // channel number
- hpt[3] = m_hpt_data[2]; // pmport number
- hpt[2] = HDIO_DRIVE_TASKFILE; // real hd ioctl
+ hpt_tf[0] = m_hpt_data[0]; // controller id
+ hpt_tf[1] = m_hpt_data[1]; // channel number
+ hpt_tf[3] = m_hpt_data[2]; // pmport number
+ hpt_tf[2] = HDIO_DRIVE_TASKFILE; // real hd ioctl
taskfile->data = 0;
taskfile->feature = ATA_SMART_WRITE_LOG_SECTOR;
#if 1
if (command==IDENTIFY || command==PIDENTIFY) {
unsigned char deviceid[4*sizeof(int)+512*sizeof(char)];
- unsigned int *hpt = (unsigned int *)deviceid;
+ unsigned int *hpt_id = (unsigned int *)deviceid;
- hpt[0] = m_hpt_data[0]; // controller id
- hpt[1] = m_hpt_data[1]; // channel number
- hpt[3] = m_hpt_data[2]; // pmport number
+ hpt_id[0] = m_hpt_data[0]; // controller id
+ hpt_id[1] = m_hpt_data[1]; // channel number
+ hpt_id[3] = m_hpt_data[2]; // pmport number
- hpt[2] = HDIO_GET_IDENTITY;
+ hpt_id[2] = HDIO_GET_IDENTITY;
if (!ioctl(get_fd(), HPTIO_CTL, deviceid) && (deviceid[4*sizeof(int)] & 0x8000))
buff[0]=(command==IDENTIFY)?ATA_IDENTIFY_PACKET_DEVICE:ATA_IDENTIFY_DEVICE;
}
return 0;
}
-
#if 0 // TODO: Migrate from 'smart_command_set' to 'ata_in_regs' OR remove the function
// Utility function for printing warnings
void printwarning(smart_command_set command){
}
#endif
-
/////////////////////////////////////////////////////////////////////////////
/// SCSI open with autodetection support
return this;
// No Autodetection if device type was specified by user
- if (*get_req_type())
- return this;
+ bool sat_only = false;
+ if (*get_req_type()) {
+ // Detect SAT if device object was created by scan_smart_devices().
+ if (!(m_scanning && !strcmp(get_req_type(), "sat")))
+ return this;
+ sat_only = true;
+ }
// The code below is based on smartd.cpp:SCSIFilterKnown()
int avail_len = req_buff[4] + 5;
int len = (avail_len < req_len ? avail_len : req_len);
- if (len < 36)
- return this;
+ if (len < 36) {
+ if (sat_only) {
+ close();
+ set_err(EIO, "INQUIRY too short for SAT");
+ }
+ return this;
+ }
// Use INQUIRY to detect type
- smart_device * newdev = 0;
- try {
+ if (!sat_only) {
+
// 3ware ?
if (!memcmp(req_buff + 8, "3ware", 5) || !memcmp(req_buff + 8, "AMCC", 4)) {
close();
set_err(EINVAL, "AMCC/3ware controller, please try adding '-d 3ware,N',\n"
- "you may need to replace %s with /dev/twaN or /dev/tweN", get_dev_name());
+ "you may need to replace %s with /dev/twlN, /dev/twaN or /dev/tweN", get_dev_name());
+ return this;
+ }
+
+ // DELL?
+ if (!memcmp(req_buff + 8, "DELL PERC", 12) || !memcmp(req_buff + 8, "MegaRAID", 8)
+ || !memcmp(req_buff + 16, "PERC H700", 9) || !memcmp(req_buff + 8, "LSI\0",4)
+ ) {
+ close();
+ set_err(EINVAL, "DELL or MegaRaid controller, please try adding '-d megaraid,N'");
return this;
}
if (len >= 42 && !memcmp(req_buff + 36, "MVSATA", 6)) {
//pout("Device %s: using '-d marvell' for ATA disk with Marvell driver\n", get_dev_name());
close();
- newdev = new linux_marvell_device(smi(), get_dev_name(), get_req_type());
+ smart_device_auto_ptr newdev(
+ new linux_marvell_device(smi(), get_dev_name(), get_req_type())
+ );
newdev->open(); // TODO: Can possibly pass open fd
delete this;
- return newdev;
+ return newdev.release();
}
+ }
- // SAT or USB ?
- newdev = smi()->autodetect_sat_device(this, req_buff, len);
+ // SAT or USB ?
+ {
+ smart_device * newdev = smi()->autodetect_sat_device(this, req_buff, len);
if (newdev)
// NOTE: 'this' is now owned by '*newdev'
return newdev;
}
- catch (...) {
- // Cleanup if exception occurs after newdev was allocated
- delete newdev;
- throw;
- }
// Nothing special found
+
+ if (sat_only) {
+ close();
+ set_err(EIO, "Not a SAT device");
+ }
return this;
}
-
//////////////////////////////////////////////////////////////////////
// USB bridge ID detection
&& read_id(dir + "/bcdDevice", version) ))
return false;
- if (con->reportscsiioctl > 1)
+ if (scsi_debugmode > 1)
pout("USB ID = 0x%04x:0x%04x (0x%03x)\n", vendor_id, product_id, version);
return true;
}
-
//////////////////////////////////////////////////////////////////////
/// Linux interface
: public /*implements*/ smart_interface
{
public:
+ virtual std::string get_os_version_str();
+
virtual std::string get_app_examples(const char * appname);
virtual bool scan_smart_devices(smart_device_list & devlist, const char * type,
private:
bool get_dev_list(smart_device_list & devlist, const char * pattern,
bool scan_ata, bool scan_scsi, const char * req_type, bool autodetect);
-
+ bool get_dev_megasas(smart_device_list & devlist);
smart_device * missing_option(const char * opt);
+ int megasas_dcmd_cmd(int bus_no, uint32_t opcode, void *buf,
+ size_t bufsize, uint8_t *mbox, size_t mboxlen, uint8_t *statusp);
+ int megasas_pd_add_list(int bus_no, smart_device_list & devlist);
};
+std::string linux_smart_interface::get_os_version_str()
+{
+ struct utsname u;
+ if (!uname(&u))
+ return strprintf("%s-linux-%s", u.machine, u.release);
+ else
+ return SMARTMONTOOLS_BUILD_HOST;
+}
+
std::string linux_smart_interface::get_app_examples(const char * appname)
{
if (!strcmp(appname, "smartctl"))
return "";
}
-
// we are going to take advantage of the fact that Linux's devfs will only
-// have device entries for devices that exist. So if we get the equivalent of
-// ls /dev/hd[a-t], we have all the ATA devices on the system
+// have device entries for devices that exist.
bool linux_smart_interface::get_dev_list(smart_device_list & devlist,
const char * pattern, bool scan_ata, bool scan_scsi,
const char * req_type, bool autodetect)
}
// did we find too many paths?
- const int max_pathc = 32;
+ const int max_pathc = 1024;
int n = (int)globbuf.gl_pathc;
if (n > max_pathc) {
pout("glob(3) found %d > MAX=%d devices matching pattern %s: ignoring %d paths\n",
if (autodetect)
dev = autodetect_smart_device(name);
else if (is_scsi)
- dev = new linux_scsi_device(this, name, req_type);
+ dev = new linux_scsi_device(this, name, req_type, true /*scanning*/);
else
dev = new linux_ata_device(this, name, req_type);
if (dev) // autodetect_smart_device() may return nullptr.
- devlist.add(dev);
+ devlist.push_back(dev);
}
}
// free memory
globfree(&globbuf);
+ return true;
+}
+
+// getting devices from LSI SAS MegaRaid, if available
+bool linux_smart_interface::get_dev_megasas(smart_device_list & devlist)
+{
+ /* Scanning of disks on MegaRaid device */
+ /* Perform mknod of device ioctl node */
+ int mjr, n1;
+ char line[128];
+ bool scan_megasas = false;
+ FILE * fp = fopen("/proc/devices", "r");
+ while (fgets(line, sizeof(line), fp) != NULL) {
+ n1=0;
+ if (sscanf(line, "%d megaraid_sas_ioctl%n", &mjr, &n1) == 1 && n1 == 22) {
+ scan_megasas = true;
+ n1=mknod("/dev/megaraid_sas_ioctl_node", S_IFCHR, makedev(mjr, 0));
+ if(scsi_debugmode > 0)
+ pout("Creating /dev/megaraid_sas_ioctl_node = %d\n", n1 >= 0 ? 0 : errno);
+ if (n1 >= 0 || errno == EEXIST)
+ break;
+ }
+ }
+ fclose(fp);
+
+ if(!scan_megasas)
+ return false;
+ // getting bus numbers with megasas devices
+ struct dirent *ep;
+ unsigned int host_no = 0;
+ char sysfsdir[256];
+
+ /* we are using sysfs to get list of all scsi hosts */
+ DIR * dp = opendir ("/sys/class/scsi_host/");
+ if (dp != NULL)
+ {
+ while ((ep = readdir (dp)) != NULL) {
+ if (!sscanf(ep->d_name, "host%d", &host_no))
+ continue;
+ /* proc_name should be megaraid_sas */
+ snprintf(sysfsdir, sizeof(sysfsdir) - 1,
+ "/sys/class/scsi_host/host%d/proc_name", host_no);
+ if((fp = fopen(sysfsdir, "r")) == NULL)
+ continue;
+ if(fgets(line, sizeof(line), fp) != NULL && !strncmp(line,"megaraid_sas",12)) {
+ megasas_pd_add_list(host_no, devlist);
+ }
+ fclose(fp);
+ }
+ (void) closedir (dp);
+ } else { /* sysfs not mounted ? */
+ for(unsigned i = 0; i <=16; i++) // trying to add devices on first 16 buses
+ megasas_pd_add_list(i, devlist);
+ }
return true;
}
type = "";
bool scan_ata = (!*type || !strcmp(type, "ata" ));
- bool scan_scsi = (!*type || !strcmp(type, "scsi"));
+ // "sat" detection will be later handled in linux_scsi_device::autodetect_open()
+ bool scan_scsi = (!*type || !strcmp(type, "scsi") || !strcmp(type, "sat"));
if (!(scan_ata || scan_scsi))
return true;
if (scan_ata)
get_dev_list(devlist, "/dev/hd[a-t]", true, false, type, false);
- if (scan_scsi) // Try USB autodetection if no type specifed
- get_dev_list(devlist, "/dev/sd[a-z]", false, true, type, !*type);
+ if (scan_scsi) {
+ bool autodetect = !*type; // Try USB autodetection if no type specifed
+ get_dev_list(devlist, "/dev/sd[a-z]", false, true, type, autodetect);
+ // Support up to 104 devices
+ get_dev_list(devlist, "/dev/sd[a-c][a-z]", false, true, type, autodetect);
+ // get device list from the megaraid device
+ get_dev_megasas(devlist);
+ }
// if we found traditional links, we are done
if (devlist.size() > 0)
return 0;
}
-// Return true if STR starts with PREFIX.
-static bool str_starts_with(const char * str, const char * prefix)
+int
+linux_smart_interface::megasas_dcmd_cmd(int bus_no, uint32_t opcode, void *buf,
+ size_t bufsize, uint8_t *mbox, size_t mboxlen, uint8_t *statusp)
+{
+ struct megasas_iocpacket ioc;
+
+ if ((mbox != NULL && (mboxlen == 0 || mboxlen > MFI_MBOX_SIZE)) ||
+ (mbox == NULL && mboxlen != 0))
+ {
+ errno = EINVAL;
+ return (-1);
+ }
+
+ bzero(&ioc, sizeof(ioc));
+ struct megasas_dcmd_frame * dcmd = &ioc.frame.dcmd;
+ ioc.host_no = bus_no;
+ if (mbox)
+ bcopy(mbox, dcmd->mbox.w, mboxlen);
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->timeout = 0;
+ dcmd->flags = 0;
+ dcmd->data_xfer_len = bufsize;
+ dcmd->opcode = opcode;
+
+ if (bufsize > 0) {
+ dcmd->sge_count = 1;
+ dcmd->data_xfer_len = bufsize;
+ dcmd->sgl.sge32[0].phys_addr = (intptr_t)buf;
+ dcmd->sgl.sge32[0].length = (uint32_t)bufsize;
+ ioc.sge_count = 1;
+ ioc.sgl_off = offsetof(struct megasas_dcmd_frame, sgl);
+ ioc.sgl[0].iov_base = buf;
+ ioc.sgl[0].iov_len = bufsize;
+ }
+
+ int fd;
+ if ((fd = ::open("/dev/megaraid_sas_ioctl_node", O_RDWR)) <= 0) {
+ return (errno);
+ }
+
+ int r = ioctl(fd, MEGASAS_IOC_FIRMWARE, &ioc);
+ ::close(fd);
+ if (r < 0) {
+ return (r);
+ }
+
+ if (statusp != NULL)
+ *statusp = dcmd->cmd_status;
+ else if (dcmd->cmd_status != MFI_STAT_OK) {
+ fprintf(stderr, "command %x returned error status %x\n",
+ opcode, dcmd->cmd_status);
+ errno = EIO;
+ return (-1);
+ }
+ return (0);
+}
+
+int
+linux_smart_interface::megasas_pd_add_list(int bus_no, smart_device_list & devlist)
{
- return !strncmp(str, prefix, strlen(prefix));
+ /*
+ * Keep fetching the list in a loop until we have a large enough
+ * buffer to hold the entire list.
+ */
+ megasas_pd_list * list = 0;
+ for (unsigned list_size = 1024; ; ) {
+ list = (megasas_pd_list *)realloc(list, list_size);
+ if (!list)
+ throw std::bad_alloc();
+ bzero(list, list_size);
+ if (megasas_dcmd_cmd(bus_no, MFI_DCMD_PD_GET_LIST, list, list_size, NULL, 0,
+ NULL) < 0)
+ {
+ free(list);
+ return (-1);
+ }
+ if (list->size <= list_size)
+ break;
+ list_size = list->size;
+ }
+
+ // adding all SCSI devices
+ for (unsigned i = 0; i < list->count; i++) {
+ if(list->addr[i].scsi_dev_type)
+ continue; /* non disk device found */
+ char line[128];
+ snprintf(line, sizeof(line) - 1, "/dev/bus/%d", bus_no);
+ smart_device * dev = new linux_megaraid_device(this, line, 0, list->addr[i].device_id);
+ devlist.push_back(dev);
+ }
+ free(list);
+ return (0);
+}
+
+// Return kernel release as integer ("2.6.31" -> 206031)
+static unsigned get_kernel_release()
+{
+ struct utsname u;
+ if (uname(&u))
+ return 0;
+ unsigned x = 0, y = 0, z = 0;
+ if (!(sscanf(u.release, "%u.%u.%u", &x, &y, &z) == 3
+ && x < 100 && y < 100 && z < 1000 ))
+ return 0;
+ return x * 100000 + y * 1000 + z;
}
// Guess device type (ata or scsi) based on device name (Linux
// specific) SCSI device name in linux can be sd, sr, scd, st, nst,
// osst, nosst and sg.
-static const char * lin_dev_prefix = "/dev/";
-static const char * lin_dev_ata_disk_plus = "h";
-static const char * lin_dev_ata_devfs_disk_plus = "ide/";
-static const char * lin_dev_scsi_devfs_disk_plus = "scsi/";
-static const char * lin_dev_scsi_disk_plus = "s";
-static const char * lin_dev_scsi_tape1 = "ns";
-static const char * lin_dev_scsi_tape2 = "os";
-static const char * lin_dev_scsi_tape3 = "nos";
-static const char * lin_dev_3ware_9000_char = "twa";
-static const char * lin_dev_3ware_678k_char = "twe";
-static const char * lin_dev_cciss_dir = "cciss/";
-static const char * lin_dev_areca = "sg";
-
smart_device * linux_smart_interface::autodetect_smart_device(const char * name)
{
- const char * dev_name = name; // TODO: Remove this hack
- int dev_prefix_len = strlen(lin_dev_prefix);
-
- // if dev_name null, or string length zero
- int len;
- if (!dev_name || !(len = strlen(dev_name)))
- return 0;
+ const char * test_name = name;
- // Dereference if /dev/disk/by-*/* symlink
- char linkbuf[100];
- if ( str_starts_with(dev_name, "/dev/disk/by-")
- && readlink(dev_name, linkbuf, sizeof(linkbuf)) > 0
- && str_starts_with(linkbuf, "../../")) {
- dev_name = linkbuf + sizeof("../../")-1;
+ // Dereference symlinks
+ struct stat st;
+ std::string pathbuf;
+ if (!lstat(name, &st) && S_ISLNK(st.st_mode)) {
+ char * p = realpath(name, (char *)0);
+ if (p) {
+ pathbuf = p;
+ free(p);
+ test_name = pathbuf.c_str();
+ }
}
+
// Remove the leading /dev/... if it's there
- else if (!strncmp(lin_dev_prefix, dev_name, dev_prefix_len)) {
- if (len <= dev_prefix_len)
- // if nothing else in the string, unrecognized
- return 0;
- // else advance pointer to following characters
- dev_name += dev_prefix_len;
- }
+ static const char dev_prefix[] = "/dev/";
+ if (str_starts_with(test_name, dev_prefix))
+ test_name += strlen(dev_prefix);
// form /dev/h* or h*
- if (!strncmp(lin_dev_ata_disk_plus, dev_name,
- strlen(lin_dev_ata_disk_plus)))
+ if (str_starts_with(test_name, "h"))
return new linux_ata_device(this, name, "");
// form /dev/ide/* or ide/*
- if (!strncmp(lin_dev_ata_devfs_disk_plus, dev_name,
- strlen(lin_dev_ata_devfs_disk_plus)))
+ if (str_starts_with(test_name, "ide/"))
return new linux_ata_device(this, name, "");
// form /dev/s* or s*
- if (!strncmp(lin_dev_scsi_disk_plus, dev_name,
- strlen(lin_dev_scsi_disk_plus))) {
+ if (str_starts_with(test_name, "s")) {
// Try to detect possible USB->(S)ATA bridge
unsigned short vendor_id = 0, product_id = 0, version = 0;
- if (get_usb_id(dev_name, vendor_id, product_id, version)) {
+ if (get_usb_id(test_name, vendor_id, product_id, version)) {
const char * usbtype = get_usb_dev_type_by_id(vendor_id, product_id, version);
if (!usbtype)
return 0;
- // Linux USB layer does not support 16 byte SAT pass through command
- if (!strcmp(usbtype, "sat"))
+
+ // Kernels before 2.6.29 do not support the sense data length
+ // required for SAT ATA PASS-THROUGH(16)
+ if (!strcmp(usbtype, "sat") && get_kernel_release() < 206029)
usbtype = "sat,12";
+
// Return SAT/USB device for this type
// (Note: linux_scsi_device::autodetect_open() will not be called in this case)
return get_sat_device(usbtype, new linux_scsi_device(this, name, ""));
}
// form /dev/scsi/* or scsi/*
- if (!strncmp(lin_dev_scsi_devfs_disk_plus, dev_name,
- strlen(lin_dev_scsi_devfs_disk_plus)))
+ if (str_starts_with(test_name, "scsi/"))
return new linux_scsi_device(this, name, "");
// form /dev/ns* or ns*
- if (!strncmp(lin_dev_scsi_tape1, dev_name,
- strlen(lin_dev_scsi_tape1)))
+ if (str_starts_with(test_name, "ns"))
return new linux_scsi_device(this, name, "");
// form /dev/os* or os*
- if (!strncmp(lin_dev_scsi_tape2, dev_name,
- strlen(lin_dev_scsi_tape2)))
+ if (str_starts_with(test_name, "os"))
return new linux_scsi_device(this, name, "");
// form /dev/nos* or nos*
- if (!strncmp(lin_dev_scsi_tape3, dev_name,
- strlen(lin_dev_scsi_tape3)))
+ if (str_starts_with(test_name, "nos"))
return new linux_scsi_device(this, name, "");
- // form /dev/twa*
- if (!strncmp(lin_dev_3ware_9000_char, dev_name,
- strlen(lin_dev_3ware_9000_char)))
+ // form /dev/tw[ael]* or tw[ael]*
+ if (str_starts_with(test_name, "tw") && strchr("ael", test_name[2]))
return missing_option("-d 3ware,N");
- // form /dev/twe*
- if (!strncmp(lin_dev_3ware_678k_char, dev_name,
- strlen(lin_dev_3ware_678k_char)))
- return missing_option("-d 3ware,N");
-
- // form /dev/cciss*
- if (!strncmp(lin_dev_cciss_dir, dev_name,
- strlen(lin_dev_cciss_dir)))
+ // form /dev/cciss/* or cciss/*
+ if (str_starts_with(test_name, "cciss/"))
return missing_option("-d cciss,N");
- // form /dev/sg*
- if ( !strncmp(lin_dev_areca, dev_name,
- strlen(lin_dev_areca)) )
- return missing_option("-d areca,N");
-
// we failed to recognize any of the forms
return 0;
}
return 0;
}
- if (!strncmp(name, "/dev/twa", 8))
+ if (!strncmp(name, "/dev/twl", 8))
+ return new linux_escalade_device(this, name, linux_escalade_device::AMCC_3WARE_9700_CHAR, disknum);
+ else if (!strncmp(name, "/dev/twa", 8))
return new linux_escalade_device(this, name, linux_escalade_device::AMCC_3WARE_9000_CHAR, disknum);
else if (!strncmp(name, "/dev/twe", 8))
return new linux_escalade_device(this, name, linux_escalade_device::AMCC_3WARE_678K_CHAR, disknum);
// Areca?
disknum = n1 = n2 = -1;
- if (sscanf(type, "areca,%n%d%n", &n1, &disknum, &n2) == 1 || n1 == 6) {
- if (n2 != (int)strlen(type)) {
- set_err(EINVAL, "Option -d areca,N requires N to be a non-negative integer");
+ int encnum = 1;
+ if (sscanf(type, "areca,%n%d/%d%n", &n1, &disknum, &encnum, &n2) >= 1 || n1 == 6) {
+ if (!(1 <= disknum && disknum <= 128)) {
+ set_err(EINVAL, "Option -d areca,N/E (N=%d) must have 1 <= N <= 128", disknum);
return 0;
}
- if (!(1 <= disknum && disknum <= 24)) {
- set_err(EINVAL, "Option -d areca,N (N=%d) must have 1 <= N <= 24", disknum);
+ if (!(1 <= encnum && encnum <= 8)) {
+ set_err(EINVAL, "Option -d areca,N/E (E=%d) must have 1 <= E <= 8", encnum);
return 0;
}
- return new linux_areca_device(this, name, disknum);
+ return new linux_areca_ata_device(this, name, disknum, encnum);
}
// Highpoint ?
set_err(EINVAL, "Option '-d hpt,L/M/N' invalid controller id L supplied");
return 0;
}
- if (!(1 <= channel && channel <= 8)) {
+ if (!(1 <= channel && channel <= 128)) {
set_err(EINVAL, "Option '-d hpt,L/M/N' invalid channel number M supplied");
return 0;
}
set_err(EINVAL, "Option -d cciss,N requires N to be a non-negative integer");
return 0;
}
- if (!(0 <= disknum && disknum <= 15)) {
- set_err(EINVAL, "Option -d cciss,N (N=%d) must have 0 <= N <= 15", disknum);
+ if (!(0 <= disknum && disknum <= 127)) {
+ set_err(EINVAL, "Option -d cciss,N (N=%d) must have 0 <= N <= 127", disknum);
return 0;
}
- return new linux_cciss_device(this, name, disknum);
+ return get_sat_device("sat,auto", new linux_cciss_device(this, name, disknum));
}
#endif // HAVE_LINUX_CCISS_IOCTL_H
if (sscanf(type, "megaraid,%d", &disknum) == 1) {
return new linux_megaraid_device(this, name, 0, disknum);
}
+
+ //aacraid?
+ unsigned int device;
+ unsigned int host;
+ if(sscanf(type, "aacraid,%d,%d,%d", &host, &channel, &device)==3) {
+ //return new linux_aacraid_device(this,name,channel,device);
+ return get_sat_device("sat,auto",
+ new linux_aacraid_device(this, name, host, channel, device));
+
+ }
+
return 0;
}
std::string linux_smart_interface::get_valid_custom_dev_types_str()
{
- return "marvell, areca,N, 3ware,N, hpt,L/M/N, megaraid,N"
+ return "marvell, areca,N/E, 3ware,N, hpt,L/M/N, megaraid,N, aacraid,H,L,ID"
#ifdef HAVE_LINUX_CCISS_IOCTL_H
", cciss,N"
#endif
} // namespace
-
/////////////////////////////////////////////////////////////////////////////
/// Initialize platform interface and register with smi()