/*
* os_solaris.c
*
- * Home page of code is: http://smartmontools.sourceforge.net
+ * Home page of code is: http://www.smartmontools.org
*
- * Copyright (C) 2003-6 SAWADA Keiji <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2003-6 Casper Dik <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2003-08 SAWADA Keiji
+ * Copyright (C) 2003-15 Casper Dik
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* any later version.
*
* You should have received a copy of the GNU General Public License
- * (for example COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * (for example COPYING); if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
extern long long bytes;
-static const char *filenameandversion="$Id: os_solaris.cpp,v 1.29 2007/05/09 19:01:32 dpgilbert Exp $";
+static const char *filenameandversion="$Id: os_solaris.cpp 4142 2015-10-14 19:05:19Z chrfranke $";
-const char *os_XXXX_c_cvsid="$Id: os_solaris.cpp,v 1.29 2007/05/09 19:01:32 dpgilbert Exp $" \
+const char *os_XXXX_c_cvsid="$Id: os_solaris.cpp 4142 2015-10-14 19:05:19Z chrfranke $" \
ATACMDS_H_CVSID CONFIG_H_CVSID INT64_H_CVSID OS_SOLARIS_H_CVSID SCSICMDS_H_CVSID UTILITY_H_CVSID;
// The printwarning() function warns about unimplemented functions
static const char *uscsidrvrs[] = {
"sd",
"ssd",
+ "disk", // SATA devices
"st"
};
return close(fd);
}
-#if defined(__sparc)
+#if defined(WITH_SOLARIS_SPARC_ATA)
// swap each 2-byte pairs in a sector
static void swap_sector(void *p)
{
#endif
// Interface to ATA devices. See os_linux.c
-int marvell_command_interface(int fd, smart_command_set command, int select, char *data){
- ARGUSED(fd); ARGUSED(command); ARGUSED(select); ARGUSED(data);
- return -1;
-}
-
-int highpoint_command_interface(int fd, smart_command_set command, int select, char *data)
-{
- ARGUSED(fd); ARGUSED(command); ARGUSED(select); ARGUSED(data);
- return -1;
-}
-
int ata_command_interface(int fd, smart_command_set command, int select, char *data){
-#if defined(__sparc)
+#if defined(WITH_SOLARIS_SPARC_ATA)
int err;
switch (command){
return smart_status_check(fd);
default:
pout("Unrecognized command %d in ata_command_interface() of os_solaris.c\n", command);
- exit(1);
+ EXIT(1);
break;
}
-#else /* __sparc */
+#else /* WITH_SOLARIS_SPARC_ATA */
ARGUSED(fd); ARGUSED(command); ARGUSED(select); ARGUSED(data);
/* Above smart_* routines uses undocumented ioctls of "dada"
return -1;
}
-// Interface to ATA devices behind 3ware escalade RAID controller cards. See os_linux.c
-int escalade_command_interface(int fd, int disknum, int escalade_type, smart_command_set command, int select, char *data){
- ARGUSED(fd); ARGUSED(disknum); ARGUSED(escalade_type);
- ARGUSED(command); ARGUSED(select); ARGUSED(data);
-
- if (printwarning(1))
- return -1;
- return -1;
-}
-
#include <errno.h>
#include <sys/scsi/generic/commands.h>
#include <sys/scsi/generic/status.h>
default:
return -EINVAL;
}
- uscsi.uscsi_flags |= (USCSI_ISOLATE | USCSI_RQENABLE);
+ uscsi.uscsi_flags |= (USCSI_ISOLATE | USCSI_RQENABLE | USCSI_SILENT);
if (ioctl(fd, USCSICMD, &uscsi)) {
int err = errno;
if ((SCSI_STATUS_CHECK_CONDITION == iop->scsi_status) &&
iop->sensep && (len > 3)) {
- pout(" status=0x%x: sense_key=0x%x asc=0x%x ascq=0x%x\n",
- iop->scsi_status, iop->sensep[2] & 0xf,
- iop->sensep[12], iop->sensep[13]);
+ if ((iop->sensep[0] & 0x7f) > 0x71)
+ pout(" status=%x: [desc] sense_key=%x asc=%x ascq=%x\n",
+ iop->scsi_status, iop->sensep[1] & 0xf,
+ iop->sensep[2], iop->sensep[3]);
+ else
+ pout(" status=%x: sense_key=%x asc=%x ascq=%x\n",
+ iop->scsi_status, iop->sensep[2] & 0xf,
+ iop->sensep[12], iop->sensep[13]);
if (report > 1) {
pout(" >>> Sense buffer, len=%d:\n", len);
dStrHex((const char *)iop->sensep, ((len > 252) ? 252 : len) , 1);
- }
+ }
} else if (iop->scsi_status)
pout(" status=%x\n", iop->scsi_status);
if (iop->resid)