%endif
%endif
-# Set the default _initconfdir when undefined.
%if %{undefined _initconfdir}
%global _initconfdir /etc/sysconfig
%endif
+%if %{undefined _unitdir}
+%global _unitdir %{_prefix}/lib/systemd/system
+%endif
+
+%if %{undefined _presetdir}
+%global _presetdir %{_prefix}/lib/systemd/system-preset
+%endif
+
+%if %{undefined _modulesloaddir}
+%global _modulesloaddir %{_prefix}/lib/modules-load.d
+%endif
+
+%if %{undefined _systemdgeneratordir}
+%global _systemdgeneratordir %{_prefix}/lib/systemd/system-generators
+%endif
+
%bcond_with debug
+%bcond_with debuginfo
+%bcond_with asan
%bcond_with systemd
+# Exclude test-runner.py from the rpmbuild shebang check to allow it to run
+# under Python 2 and 3.
+%global __brp_mangle_shebangs_exclude_from test-runner.py
+
# Generic enable switch for systemd
%if %{with systemd}
%define _systemd 1
%define _systemd 1
%endif
+# When not specified default to distribution provided version. This
+# is normally Python 3, but for RHEL <= 7 only Python 2 is provided.
+%if %{undefined __use_python}
+%if 0%{?rhel} && 0%{?rhel} <= 7
+%define __python /usr/bin/python2
+%define __python_pkg_version 2
+%define __python_cffi_pkg python-cffi
+%define __python_setuptools_pkg python-setuptools
+%else
+%define __python /usr/bin/python3
+%define __python_pkg_version 3
+%define __python_cffi_pkg python3-cffi
+%define __python_setuptools_pkg python3-setuptools
+%endif
+%else
+%define __python %{__use_python}
+%define __python_pkg_version %{__use_python_pkg_version}
+%define __python_cffi_pkg python%{__python_pkg_version}-cffi
+%define __python_setuptools_pkg python%{__python_pkg_version}-setuptools
+%endif
+
+# By default python-pyzfs is enabled, with the exception of
+# RHEL 6 which by default uses Python 2.6 which is too old.
+%if 0%{?rhel} == 6
+%bcond_with pyzfs
+%else
+%bcond_without pyzfs
+%endif
+
Name: @PACKAGE@
Version: @VERSION@
Release: @RELEASE@%{?dist}
URL: http://zfsonlinux.org/
Source0: %{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Requires: spl = %{version}
Requires: libzpool2 = %{version}
Requires: libnvpair1 = %{version}
Requires: libuutil1 = %{version}
Requires: libzfs2 = %{version}
Requires: %{name}-kmod = %{version}
Provides: %{name}-kmod-common = %{version}
+Obsoletes: spl
# zfs-fuse provides the same commands and man pages that ZoL does. Renaming
# those on either side would conflict with all available documentation.
Conflicts: zfs-fuse
%if 0%{?rhel}%{?fedora}%{?suse_version}
+BuildRequires: gcc, make
BuildRequires: zlib-devel
BuildRequires: libuuid-devel
BuildRequires: libblkid-devel
BuildRequires: libudev-devel
BuildRequires: libattr-devel
BuildRequires: openssl-devel
+%if 0%{?fedora} >= 28
+BuildRequires: libtirpc-devel
+%endif
Requires: openssl
+%if 0%{?_systemd}
+BuildRequires: systemd
+%endif
%endif
+
%if 0%{?_systemd}
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
-BuildRequires: systemd
%endif
# The zpool iostat/status -c scripts call some utilities like lsblk and iostat
Requires: sysstat
%description
-This package contains the ZFS command line utilities.
+This package contains the core ZFS command line utilities.
%package -n libzpool2
Summary: Native ZFS pool library for Linux
Requires: mdadm
Requires: bc
Requires: ksh
-Requires: fio
-Requires: acl
-Requires: sudo
-Requires: sysstat
-Requires: rng-tools
+Requires: fio
+Requires: acl
+Requires: sudo
+Requires: sysstat
+Requires: libaio
+Requires: python%{__python_pkg_version}
+%if 0%{?rhel}%{?fedora}%{?suse_version}
+BuildRequires: libaio-devel
+%endif
+AutoReqProv: no
%description test
This package contains test infrastructure and support scripts for
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: dracut
+Requires: /usr/bin/awk
+Requires: grep
%description dracut
This package contains a dracut module used to construct an initramfs
image which is ZFS aware.
+%if %{with pyzfs}
+%package -n python%{__python_pkg_version}-pyzfs
+Summary: Python %{python_version} wrapper for libzfs_core
+Group: Development/Languages/Python
+License: Apache-2.0
+BuildArch: noarch
+Requires: libzfs2 = %{version}
+Requires: libnvpair1 = %{version}
+Requires: libffi
+Requires: python%{__python_pkg_version}
+Requires: %{__python_cffi_pkg}
+%if 0%{?rhel}%{?fedora}%{?suse_version}
+BuildRequires: python%{__python_pkg_version}-devel
+BuildRequires: %{__python_cffi_pkg}
+BuildRequires: %{__python_setuptools_pkg}
+BuildRequires: libffi-devel
+%endif
+
+%description -n python%{__python_pkg_version}-pyzfs
+This package provides a python wrapper for the libzfs_core C library.
+%endif
+
%if 0%{?_initramfs}
%package initramfs
Summary: Initramfs module
%else
%define debug --disable-debug
%endif
+
+%if %{with debuginfo}
+ %define debuginfo --enable-debuginfo
+%else
+ %define debuginfo --disable-debuginfo
+%endif
+
+%if %{with asan}
+ %define asan --enable-asan
+%else
+ %define asan --disable-asan
+%endif
+
%if 0%{?_systemd}
- %define systemd --enable-systemd --with-systemdunitdir=%{_unitdir} --with-systemdpresetdir=%{_presetdir} --disable-sysvinit
- %define systemd_svcs zfs-import-cache.service zfs-import-scan.service zfs-mount.service zfs-share.service zfs-zed.service zfs.target
+ %define systemd --enable-systemd --with-systemdunitdir=%{_unitdir} --with-systemdpresetdir=%{_presetdir} --with-systemdmodulesloaddir=%{_modulesloaddir} --with-systemdgeneratordir=%{_systemdgeneratordir} --disable-sysvinit
+ %define systemd_svcs zfs-import-cache.service zfs-import-scan.service zfs-mount.service zfs-share.service zfs-zed.service zfs.target zfs-import.target
%else
%define systemd --enable-sysvinit --disable-systemd
%endif
+%if %{with pyzfs}
+ %define pyzfs --enable-pyzfs
+%else
+ %define pyzfs --disable-pyzfs
+%endif
+
%setup -q
%build
--with-udevdir=%{_udevdir} \
--with-udevruledir=%{_udevruledir} \
--with-dracutdir=%{_dracutdir} \
+ --with-python=%{__python} \
--disable-static \
%{debug} \
- %{systemd}
+ %{debuginfo} \
+ %{asan} \
+ %{systemd}\
+ %{pyzfs}
make %{?_smp_mflags}
%install
%post
%if 0%{?_systemd}
+%if 0%{?systemd_post:1}
%systemd_post %{systemd_svcs}
%else
+if [ "$1" = "1" -o "$1" = "install" ] ; then
+ # Initial installation
+ systemctl preset %{systemd_svcs} >/dev/null || true
+fi
+%endif
+%else
if [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --add zfs-import
/sbin/chkconfig --add zfs-mount
%endif
exit 0
+# On RHEL/CentOS 7 the static nodes aren't refreshed by default after
+# installing a package. This is the default behavior for Fedora.
+%posttrans
+%if 0%{?rhel} == 7 || 0%{?centos} == 7
+systemctl restart kmod-static-nodes
+systemctl restart systemd-tmpfiles-setup-dev
+udevadm trigger
+%endif
+
%preun
%if 0%{?_systemd}
+%if 0%{?systemd_preun:1}
%systemd_preun %{systemd_svcs}
%else
-if [ "$1" = "0" ] && [ -x /sbin/chkconfig ]; then
+if [ "$1" = "0" -o "$1" = "remove" ] ; then
+ # Package removal, not upgrade
+ systemctl --no-reload disable %{systemd_svcs} >/dev/null || true
+ systemctl stop %{systemd_svcs} >/dev/null || true
+fi
+%endif
+%else
+if [ "$1" = "0" -o "$1" = "remove" ] && [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --del zfs-import
/sbin/chkconfig --del zfs-mount
/sbin/chkconfig --del zfs-share
%postun
%if 0%{?_systemd}
+%if 0%{?systemd_postun:1}
%systemd_postun %{systemd_svcs}
+%else
+systemctl --system daemon-reload >/dev/null || true
+%endif
%endif
%files
+# Core utilities
%{_sbindir}/*
-%{_bindir}/*
-%{_libexecdir}/%{name}
+%{_bindir}/raidz_test
+%{_bindir}/zgenhostid
+# Optional Python 2/3 scripts
+%{_bindir}/arc_summary
+%{_bindir}/arcstat
+%{_bindir}/dbufstat
+# Man pages
%{_mandir}/man1/*
%{_mandir}/man5/*
%{_mandir}/man8/*
+# Configuration files and scripts
+%{_libexecdir}/%{name}
%{_udevdir}/vdev_id
%{_udevdir}/zvol_id
%{_udevdir}/rules.d/*
%if 0%{?_systemd}
-/usr/lib/modules-load.d/*
%{_unitdir}/*
%{_presetdir}/*
+%{_modulesloaddir}/*
+%{_systemdgeneratordir}/*
%else
%config(noreplace) %{_sysconfdir}/init.d/*
%config(noreplace) %{_initconfdir}/zfs
%{_datadir}/pkgconfig/libzfs_core.pc
%{_libdir}/*.so
%{_includedir}/*
-%doc AUTHORS COPYRIGHT DISCLAIMER
-%doc OPENSOLARIS.LICENSE README.markdown
+%doc AUTHORS COPYRIGHT LICENSE NOTICE README.md
%files test
%{_datadir}/%{name}
%doc contrib/dracut/README.dracut.markdown
%{_dracutdir}/modules.d/*
+%if %{with pyzfs}
+%files -n python%{__python_pkg_version}-pyzfs
+%doc contrib/pyzfs/README
+%doc contrib/pyzfs/LICENSE
+%defattr(-,root,root,-)
+%{python_sitelib}/libzfs_core/*
+%{python_sitelib}/pyzfs*
+%endif
+
%if 0%{?_initramfs}
%files initramfs
%doc contrib/initramfs/README.initramfs.markdown
# ignore those files.
%exclude /usr/share/initramfs-tools
%endif
-
-%changelog
-* Wed Jul 26 2017 Brian Behlendorf <behlendorf1@llnl.gov> - 0.7.0-1
-- Released 0.7.0-1, detailed release notes are available at:
-- https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.7.0
projects / mirror_zfs.git / blobdiff