# Sample configuration file for smartd. See man smartd.conf.
-# Home page is: http://smartmontools.sourceforge.net
+# Home page is: http://www.smartmontools.org
-# $Id: smartd.conf 3128 2010-07-27 13:08:31Z chrfranke $
+# $Id: smartd.conf 4120 2015-08-27 16:12:21Z samm2 $
# smartd will re-read the configuration file if it receives a HUP
# signal
# and min/max temperatures.
#DEVICESCAN -I 194 -I 231 -I 9 -W 5
-# First (primary) ATA/IDE hard disk. Monitor all attributes, enable
+# First ATA/SATA or SCSI/SAS disk. Monitor all attributes, enable
# automatic online data collection, automatic Attribute autosave, and
# start a short self-test every day between 2-3am, and a long self test
# Saturdays between 3-4am.
-#/dev/hda -a -o on -S on -s (S/../.././02|L/../../6/03)
+#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
# Monitor SMART status, ATA Error Log, Self-test log, and track
# changes in all attributes except for attribute 194
-#/dev/hdb -H -l error -l selftest -t -I 194
+#/dev/sdb -H -l error -l selftest -t -I 194
# Monitor all attributes except normalized Temperature (usually 194),
# but track Temperature changes >= 4 Celsius, report Temperatures
# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
# Send mail on SMART failures or when Temperature is >= 55 Celsius.
-#/dev/hdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
# ATA Translation (SAT) layer is between the OS and the device then
# A very silent check. Only report SMART health status if it fails
# But send an email in this case
-#/dev/hdc -H -C 0 -U 0 -m admin@example.com
+#/dev/sdc -H -C 0 -U 0 -m admin@example.com
# First two SCSI disks. This will monitor everything that smartd can
# monitor. Start extended self-tests Wednesdays between 6-7pm and
#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
-# uses the 3w-sas driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
# between 1-2 and 3-4 am.
+# On FreeBSD /dev/tws0 should be used instead
#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
-#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
# Same as above for Windows. Option '-d 3ware,N' is not necessary,
# disk (port) number is specified in device name.
# All but -d, -m and -M Directives are only implemented for ATA devices
#
# If the test string DEVICESCAN is the first uncommented text
-# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
+# then smartd will scan for devices.
# DEVICESCAN may be followed by any desired Directives.