oliviermartin [Fri, 3 Jun 2011 09:11:55 +0000 (09:11 +0000)]
EmbeddedPkg/SimpleTextInOutSerial: Update the cursor position
It is a UEFI requirement to update the cursor position infomation for each
string displayed using calls to EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL->OutputString().
oliviermartin [Fri, 3 Jun 2011 09:09:18 +0000 (09:09 +0000)]
EmbeddedPkg/MmcDxe: Wait for the MMC controller to be in Transfer Mode
The MMC controller might be ready for data but not be in a 'ready' state
to send or receive commands.
This fix waits for the MMC controller to be in the correct state.
andrewfish [Wed, 1 Jun 2011 02:27:02 +0000 (02:27 +0000)]
Make shell not ASSERT on older versions of EFI. On a Mac if you soft load Hii, DevicePathToText, and ComponentName drivers from edk2, then with this patch the new Shell will run.
andrewfish [Tue, 31 May 2011 20:23:36 +0000 (20:23 +0000)]
Add BlockIO support to the emulator, still needs testing. Also update Emulator start code to only pass 2 args in place of 3. The 3rd argument is not needed. Still need a function as the BaseLib functoin does not have the correct calling conventions. Cleanup build script for binary shell case.
geekboy15a [Fri, 27 May 2011 20:04:45 +0000 (20:04 +0000)]
MdeModulePkg: Fixed memory corruption when BlockIo2 is not present
Fixed NULL pointer reference of BlockIo2.Media in partition code. This resulted
in the interrupt vector table being corrupted in a legacy (CSM) based system.
vanjeff [Fri, 27 May 2011 05:30:30 +0000 (05:30 +0000)]
1. Setting cursor position to (0, 0) and flushing cursor directly instead of calling GraphicConSoleConOutSetPosition().
2. Rename the internal function name EraseCursor() to FlushCursor() to remove the confusion on this function name. And add detailed function description for it.
jcarsey [Wed, 25 May 2011 22:29:40 +0000 (22:29 +0000)]
Remove ASSERT within Ls for RTC error and associated changes.
TimeDate.c: replace magic number with constant.
Ls.c: use new warning printout string and remove an ASSERT. also replace magic number with constant.
The UNI file: add new warning printout string.
rsun3 [Tue, 24 May 2011 01:56:29 +0000 (01:56 +0000)]
Per PI 1.2 errata B spec, for SetMemoryAttributes() service of CPU Architecture Protocol, EFI_INVALID_PARAMETER should be returned for cases:
If Attributes specifies a combination of memory attributes that cannot be set together, then EFI_INVALID_PARAMETER is returned. For example, if both EFI_MEMORY_UC and EFI_MEMORY_WT are set.
ydong10 [Fri, 20 May 2011 02:56:26 +0000 (02:56 +0000)]
Add new definition used for new call back return type and new action type. Signed-off-by: ydong10 Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11687 6f19259b-4bc3-4df7-8a09-765794883524
ydong10 [Fri, 20 May 2011 02:48:59 +0000 (02:48 +0000)]
Refine some call back function to return EFI_UNSUPPORTED for all unsupported call back type. Signed-off-by: ydong10 Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11686 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Fri, 20 May 2011 02:25:12 +0000 (02:25 +0000)]
Order sections as [Defines], [Includes], [LibraryClasses], [Guids], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic] and [PcdsDynamicEx].
lzeng14 [Fri, 20 May 2011 02:21:35 +0000 (02:21 +0000)]
Order sections as [Defines], [Includes], [LibraryClasses], [Guids], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic] and [PcdsDynamicEx].
lzeng14 [Fri, 20 May 2011 02:14:48 +0000 (02:14 +0000)]
Order sections as [Defines], [Includes], [LibraryClasses], [Guids], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic] and [PcdsDynamicEx].
ydong10 [Fri, 20 May 2011 01:58:48 +0000 (01:58 +0000)]
Refine all R9 call back function to return EFI_UNSUPPORTED for all unsupported call back type. Signed-off-by: ydong10 Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11682 6f19259b-4bc3-4df7-8a09-765794883524
ydong10 [Fri, 20 May 2011 01:33:42 +0000 (01:33 +0000)]
Refine all R9 call back function to return EFI_UNSUPPORTED for all unsupported call back type. Signed-off-by: ydong10 Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11681 6f19259b-4bc3-4df7-8a09-765794883524
ydong10 [Fri, 20 May 2011 01:28:17 +0000 (01:28 +0000)]
Refine all R9 call back function to return EFI_UNSUPPORTED for all unsupported call back type. Signed-off-by: ydong10 Reviewed-by: lgao4
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11680 6f19259b-4bc3-4df7-8a09-765794883524
jcarsey [Tue, 17 May 2011 20:32:47 +0000 (20:32 +0000)]
Clarify an error in Map command.
Revert a change in Map command that affected some consistent map names being printed correctly.
Fix a library instance mapping in DSC.
lzeng14 [Tue, 17 May 2011 08:56:03 +0000 (08:56 +0000)]
According to PI_1_2_Errata_B, EFI_FFS_INTEGRITY_CHECK.Checksum.File should be 8-bit checksum of the file data, not the entire file, correct the comments.
rsun3 [Tue, 17 May 2011 08:35:20 +0000 (08:35 +0000)]
A complement fix for revision 11664 to update GCC assembly files : clear the direction flag in interrupt/exception handlers' assembly entry code before calling C functions to follow the UEFI calling convention.
jcarsey [Mon, 16 May 2011 22:20:11 +0000 (22:20 +0000)]
add required 'profiles.txt' file to the binary releases.
add 'minimal' version of the shell (without any profiles).
update to current ShellPkg tip version.
jcarsey [Mon, 16 May 2011 22:12:20 +0000 (22:12 +0000)]
add support to easily remove profiles and shell levels. the libraries will not do anything (but no longer fail), if the PCDs are changed to remove their functionality.
jcarsey [Mon, 16 May 2011 21:08:34 +0000 (21:08 +0000)]
added support for -i and -o for HII based configurations.
added support for all EFI_DRIVER_CONFIGURATION(2) based configurations.
added support for display of all configurable handles.
jljusten [Sun, 15 May 2011 17:23:33 +0000 (17:23 +0000)]
InOsEmuPkg: Use EdkShellBinPkg by default
The following can be defined on the build command line:
* BUILD_NEW_SHELL: Build & run the UefiShell
* USE_NEW_SHELL: Use the pre-build UefiShell binary
* BUILD_OLD_SHELL: Use the GCC shell binary previously built
For the FAT driver:
* BUILD_FAT: Build the fat driver from source
andrewfish [Sat, 14 May 2011 16:00:22 +0000 (16:00 +0000)]
Added generic EFIABI SEC to InOsEmuPkg. Add library to abstract FV cracking and remove code from original Sec/OS App. Add a PeiServicesLib wrapper for SEC that uses passed in PEI list and can abstract FV reading. Don't load images for XIP code and just run from FV directly on Mac OS X, or from dlopen on Linux. Moved temp ram switch code into generic SEC. Fixed design issue with PeiServiceTablePointerLib.
andrewfish [Fri, 13 May 2011 00:03:26 +0000 (00:03 +0000)]
Add MP support. Based on PcdEmuApCount APs (Application Processors) are created in the CpuRuntimeDxe driver. If PcdEmuApCount > 0 then the MpServices protocol is created on top of pthreads and the APs are availible to use vis the MpService protocol.
andrewfish [Wed, 11 May 2011 18:31:20 +0000 (18:31 +0000)]
Add InOsEmuPkg. Like UnixPkg and Nt32Pkg, but EFI code can be common and does not require including system include files. Currently only Unix 64-bit is supported and it has only been tested on Mac OS X. Not all features are ported over, but GOP, via X11, and access to local file systems are supported and you can boot to the shell.
mdkinney [Mon, 9 May 2011 17:52:22 +0000 (17:52 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:58 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:36 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:18 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:00 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:50:40 +0000 (17:50 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:50:20 +0000 (17:50 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:49:59 +0000 (17:49 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:49:17 +0000 (17:49 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:48:32 +0000 (17:48 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:48:14 +0000 (17:48 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]