Make it safe to call iommu_disable during early init error conditions
before mmio_base is set, but after the struct amd_iommu has been added
to the amd_iommu_list. For example, this happens if firmware fails to
fill in mmio_phys in the ACPI table leading to a NULL pointer
dereference in iommu_feature_disable.
Fixes: 2c0ae1720c09c ('iommu/amd: Convert iommu initialization to state machine') Signed-off-by: Kevin Mitchell <kevmitch@arista.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
After ethtool loopback packet tests, we re-open the nic for the next
IRQ test. If the open fails, we must not proceed with the IRQ test
or we will crash with NULL pointer dereference. Fix it by checking
the bnxt_open_nic() return code before proceeding.
Reported-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Fixes: 67fea463fd87 ("bnxt_en: Add interrupt test to ethtool -t selftest.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the
WAIT field.
The WAIT field according to the documentation for both parts "specifies
time interval between auto read and write access in one time program. It is
given in number of ipg_clk periods."
This patch ensures that the relevant field is read and written back to the
timing register.
080edf75d337 ("dmaengine: hsu: set HSU_CH_MTSR to memory width")
has been mistakenly submitted. The further investigations show that
the original code does better job since the memory side transfer size
has never been configured by DMA users.
As per latest revision of documentation: "Channel minimum transfer size
(CHnMTSR)... For IOSF UART, maximum value that can be programmed is 64 and
minimum value that can be programmed is 1."
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b03155 drm/msm: add a3xx gpu support Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Besides the alarm, the PCF8563 also has a timer triggered interrupt.
In cases where the previous system left the timer and interrupts on,
or somehow the bits got enabled, the interrupt would keep triggering
as the kernel doesn't know about it.
Clear both the alarm and timer event flags, and disable the interrupts,
before requesting the interrupt line.
If multiple serializers are connected in the system and the number of
channels will need to use more than one serializer the mask to enable the
serializers were left to 0 if tdm_mask is provided
Fixes: dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still
open HiperTransport-based connections. For robust operation these
connections require the af_iucv_netdev_notifier, so register it
unconditionally.
Also handle any error that register_netdevice_notifier() returns.
Fixes: 9fbd87d41392 ("af_iucv: handle netdev events") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one. The backlog length has to be adjusted to account for
new frames.
The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.
Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).
Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.
Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If mdp5_cfg_init fails because of an unknown major version, a null pointer
dereference occurs. This is because the caller of init expects error
pointers, but init returns NULL on error. Fix this by returning the
expected values on error.
Fixes: 2e362e1772b8 (drm/msm/mdp5: introduce mdp5_cfg module) Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
It's common for the platform to replace the cache device nodes after a
migration. Since the cacheinfo code is never informed about this, it
never drops its references to the source system's cache nodes, causing
it to wind up in an inconsistent state resulting in warnings and oopses
as soon as CPU online/offline occurs after the migration, e.g.
cache for /cpus/l3-cache@3113(Unified) refers to cache for /cpus/l2-cache@200d(Unified)
WARNING: CPU: 15 PID: 86 at arch/powerpc/kernel/cacheinfo.c:176 release_cache+0x1bc/0x1d0
[...]
NIP release_cache+0x1bc/0x1d0
LR release_cache+0x1b8/0x1d0
Call Trace:
release_cache+0x1b8/0x1d0 (unreliable)
cacheinfo_cpu_offline+0x1c4/0x2c0
unregister_cpu_online+0x1b8/0x260
cpuhp_invoke_callback+0x114/0xf40
cpuhp_thread_fun+0x270/0x310
smpboot_thread_fn+0x2c8/0x390
kthread+0x1b8/0x1c0
ret_from_kernel_thread+0x5c/0x68
Using device tree notifiers won't work since we want to rebuild the
hierarchy only after all the removals and additions have occurred and
the device tree is in a consistent state. Call cacheinfo_teardown()
before processing device tree updates, and rebuild the hierarchy
afterward.
Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Allow external callers to force the cacheinfo code to release all its
references to cache nodes, e.g. before processing device tree updates
post-migration, and to rebuild the hierarchy afterward.
CPU online/offline must be blocked by callers; enforce this.
Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Destroy QP waits for it's ep object state to be set to CLOSED
before proceeding. ep->state can be updated from a different
context. Add smp_store_release/READ_ONCE to synchronize.
Fixes: fc4c6065e661 ("qed: iWARP implement disconnect flows") Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
intel_iommu_get_resv_regions() aims to return the list of
reserved regions accessible by a given @device. However several
devices can access the same reserved memory region and when
building the list it is not safe to use a single iommu_resv_region
object, whose container is the RMRR. This iommu_resv_region must
be duplicated per device reserved region list.
Let's remove the struct iommu_resv_region from the RMRR unit
and allocate the iommu_resv_region directly in
intel_iommu_get_resv_regions(). We hold the dmar_global_lock instead
of the rcu-lock to allow sleeping.
Fixes: 0659b8dc45a6 ("iommu/vt-d: Implement reserved region get/put callbacks") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If you configure a route with multiple labels, e.g.
ip route add 10.10.3.0/24 encap mpls 16/100 via 10.10.2.2 dev ens4
A warning is logged:
kernel: [ 130.561819] netlink: 'ip': attribute type 1 has an invalid
length.
This happens because mpls_iptunnel_policy has set the type of
MPLS_IPTUNNEL_DST to fixed size NLA_U32.
Change it to a minimum size.
nla_get_labels() does the remaining validation.
Fixes: e3e4712ec096 ("mpls: ip tunnel support") Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The assigment of FB_VMODE_NONINTERLACE to var->vmode should be a
bit-wise or of FB_VMODE_NONINTERLACE instead of an assignment,
otherwise the previous clearing of the FB_VMODE_MASK bits of
var->vmode makes no sense and is redundant.
Addresses-Coverity: ("Unused value") Fixes: ad4e02d5081d ("[media] vivid: add a simple framebuffer device for overlay testing") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
What we read back from the register is going to be capped at 32-bits,
and cpufreq_freq_table.frequency is an unsigned int. Avoid any possible
value truncation by using the appropriate return value.
There is a logical error in brcm_avs_is_firmware_loaded() whereby if the
firmware returns -EINVAL, we will be reporting this as an error. The
comment is correct, the code was not.
Both IPv6 and 6lowpan are calling inet_frags_fini() too soon.
inet_frags_fini() is dismantling a kmem_cache, that might be needed
later when unregister_pernet_subsys() eventually has to remove
frags queues from hash tables and free them.
This fixes potential use-after-free, and is a prereq for the following patch.
Fixes: d4ad4d22e7ac ("inet: frags: use kmem_cache for inet_frag_queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change). The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.
Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal. The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.
So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.
Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.
Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Jeff Layton <jlayton@primarydata.com> Cc: Steve French <smfrench@gmail.com> Fixes: a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"") Fixes: e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The iommu_group_get_for_dev() will allocate a group for a
device if it isn't in any group. This isn't the use case
in iommu_request_dm_for_dev(). Let's use iommu_group_get()
instead.
drivers/misc/sgi-xp/xpc_partition.c:73:14: warning: variable 'buf' is
uninitialized when used within its own initialization [-Wuninitialized]
void *buf = buf;
~~~ ^~~
1 warning generated.
Arnd's explanation during review:
/*
* Returns the physical address of the partition's reserved page through
* an iterative number of calls.
*
* On first call, 'cookie' and 'len' should be set to 0, and 'addr'
* set to the nasid of the partition whose reserved page's address is
* being sought.
* On subsequent calls, pass the values, that were passed back on the
* previous call.
*
* While the return status equals SALRET_MORE_PASSES, keep calling
* this function after first copying 'len' bytes starting at 'addr'
* into 'buf'. Once the return status equals SALRET_OK, 'addr' will
* be the physical address of the partition's reserved page. If the
* return status equals neither of these, an error as occurred.
*/
static inline s64
sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
so *len is set to zero on the first call and tells the bios how many
bytes are accessible at 'buf', and it does get updated by the BIOS to
tell us how many bytes it needs, and then we allocate that and try again.
Fixes: 279290294662 ("[IA64-SGI] cleanup the way XPC locates the reserved page") Link: https://github.com/ClangBuiltLinux/linux/issues/466 Suggested-by: Stephen Hines <srhines@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Adds a check on the Transmission Complete bit status before closing the
com port. Prevents the port closure before the end of the transmission.
TC poll loop is moved from stm32_tx_dma_complete to stm32_shutdown
routine, in order to check TC before shutdown in both dma and
PIO tx modes.
TC clear is added in stm32_transmit_char routine, in order to be cleared
before transmitting in both dma and PIO tx modes.
Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
- Fixes parity and framing error bit by clearing parity and framing error
flag. The current implementation doesn't clear the error bits when an
error is detected.
- Fixes the incorrect name of framing error clearing flag in header file.
- Fixes misalignement between data frame and errors status. The status
read for "n" frame was the status of "n+1" frame".
- Fixes break detection was not triggered by the expected register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
alg: skcipher: cbc-des3-ccp encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
The offset value should not be recomputed when retrieving the context.
Also, a code path exists which makes decisions based on older (version 3)
hardware; a v3 device deosn't support 3DES so remove this check.
Fixes: 990672d48515 ('crypto: ccp - Enable 3DES function on v5 CCPs') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Updated testmgr will exhibit this error message when loading the
ccp-crypto module:
alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place"
Update the CCP crypto driver to correctly treat CFB as a streaming mode
cipher (instead of block mode). Update the configuration for CFB to
specify the block size as a single byte;
Fixes: 2b789435d7f3 ('crypto: ccp - CCP AES crypto API support') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The eMMC on this board is add-on module which is not mandatory. Removing
'non-removable' property should prevent some errors when booting a board
w/o an eMMC module present.
Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")
added support to save and restore the DMA channel registers when runtime
suspending the ADMA. This change is causing the kernel to crash when
probing the ADMA, if the device is probed deferred when looking up the
channel interrupts. The crash occurs because not all of the channel base
addresses have been setup at this point and in the clean-up path of the
probe, pm_runtime_suspend() is called invoking its callback which
expects all the channel base addresses to be initialised.
Although this could be fixed by simply checking for a NULL address, on
further review of the driver it seems more appropriate that we only call
pm_runtime_get_sync() after all the channel interrupts and base
addresses have been configured. Therefore, fix this crash by moving the
calls to pm_runtime_enable(), pm_runtime_get_sync() and
tegra_adma_init() after the DMA channels have been initialised.
mmc1 node where wifi module is connected doesn't have properly defined
power supplies so wifi module is never powered up. Fix that by
specifying additional power supplies.
Additionally, this STB may have either Realtek or Broadcom based wifi
module. One based on Broadcom module also needs external clock to work
properly. Fix that by adding clock property to wifi_pwrseq node.
Fixes: e582b47a9252 ("ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The function should return NULL in case no device is found, but it
always returns the last checked mc device from the list even if the
index did not match. Fix that.
I did some analysis why this did not raise any issues for about 3 years
and the reason is that edac_mc_find() is mostly used to search for
existing devices. Thus, the bug is not triggered.
[ bp: Drop the if (mci->mc_idx > idx) test in favor of readability. ]
The CPU load values passed to the thermal_power_cpu_get_power
tracepoint are zero for all CPUs, unless, unless the
thermal_power_cpu_limit tracepoint is enabled too:
There seems to be no good reason for omitting the CPU load information
depending on another tracepoint. My guess is that the intention was to
check whether thermal_power_cpu_get_power is (still) enabled, however
'load_cpu != NULL' already indicates that it was at least enabled when
cpufreq_get_requested_power() was entered, there seems little gain
from omitting the assignment if the tracepoint was just disabled, so
just remove the check.
Fixes: 6828a4711f99 ("thermal: add trace events to the power allocator governor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Javi Merino <javi.merino@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status()
both return the brightness value if the brightness was successfully
updated. Writing to these attributes via sysfs would cause a 'Bad
address' error to be returned. These functions should return 0 on
success, so let's change it to correct that error.
Fixes: 28e64a68a2ef ("backlight: lm3630: apply chip revision") Signed-off-by: Brian Masney <masneyb@onstation.org> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the
cpu in a bitmap of online cpus, but if the value is too high then it
could read beyond the end of the bitmap and possibly Oops.
Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There is an abnormally low about 20ms,when setting duty repeatedly.
Because setting the duty will disable PWM and then enable. Delete
this operation now.
Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller") Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
[ Dropped code instead of hiding it behind a comment ] Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The pre-divider allows configuring longer PWM periods compared to using
the input clock directly. The pre-divider is 7 bit wide, meaning it's
maximum value is 128 (the register value is off-by-one: 0x7f or 127).
Change the loop to also allow for the maximum possible value to be
considered valid.
Fixes: 211ed630753d2f ("pwm: Add support for Meson PWM Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If userspace provides a rule blob with trailing data after last target,
we trigger a splat, then convert ruleset to 64bit format (with trailing
data), then pass that to do_replace_finish() which then returns -EINVAL.
Erroring out right away avoids the splat plus unneeded translation and
error unwind.
The "out_data" variable is uninitialized at the point. Originally, this
used to print "status" instead and that seems like the correct thing to
print.
Fixes: bc2ef884320b ("alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but
the problem is that "temp_index" can be negative. This patch changes
the types to unsigned to address this array underflow bug.
The "b->index" is a u32 the comes from the user in the ioctl. It hasn't
been checked. We aren't supposed to use it but we're instead supposed
to use the value that gets written to it when we call videobuf_dqbuf().
The videobuf_dqbuf() first memsets it to zero and then re-initializes it
inside the videobuf_status() function. It's this final value which we
want.
Hans Verkuil pointed out that we need to check the return from
videobuf_dqbuf(). I ended up doing a little cleanup related to that as
well.
Fixes: 72915e851da9 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.
Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
device_for_each_child() stops executing callback function for remaining
child devices, if callback hits an error.
Each child mdev device is independent of each other.
While unregistering parent device, mdev core must remove all child mdev
devices.
Therefore, mdev_device_remove_cb() always returns success so that
device_for_each_child doesn't abort if one child removal hits error.
While at it, improve remove and unregister functions for below simplicity.
There isn't need to pass forced flag pointer during mdev parent
removal which invokes mdev_device_remove(). So simplify the flow.
mdev_device_remove() is called from two paths.
1. mdev_unregister_driver()
mdev_device_remove_cb()
mdev_device_remove()
2. remove_store()
mdev_device_remove()
During mdev parent registration in mdev_register_device(),
if parent device is duplicate, it releases the reference of existing
parent device.
This is incorrect. Existing parent device should not be touched.
In the function mmc_alloc_host, the function put_device is called to
release allocated resources when mmc_gpio_alloc fails. Finally, the
function pointed by host->class_dev.class->dev_release (i.e.,
mmc_host_classdev_release) is used to release resources including the
host structure. However, after put_device, host is used and released
again. Resulting in a use-after-free bug.
Fixes: 1ed217194488 ("mmc: core: fix error path in mmc_host_alloc") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Status of ADMA channel registers is not saved and restored during system
suspend. During active playback if system enters suspend, this results in
wrong state of channel registers during system resume and playback fails
to resume properly. Fix this by saving following channel registers in
runtime suspend and restore during runtime resume.
* ADMA_CH_LOWER_SRC_ADDR
* ADMA_CH_LOWER_TRG_ADDR
* ADMA_CH_FIFO_CTRL
* ADMA_CH_CONFIG
* ADMA_CH_CTRL
* ADMA_CH_CMD
* ADMA_CH_TC
Runtime PM calls will be inovked during system resume path if a playback
or capture needs to be resumed. Hence above changes work fine for system
suspend case.
Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The kernel parameter igfx_off is used by users to disable
DMA remapping for the Intel integrated graphic device. It
was designed for bare metal cases where a dedicated IOMMU
is used for graphic. This doesn't apply to virtual IOMMU
case where an include-all IOMMU is used. This makes the
kernel parameter work with virtual IOMMU as well.
Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Fixes: c0771df8d5297 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The QP transition optional parameters for the various transition for XRC
QPs are identical to those for RC QPs.
Many of the XRC QP transition optional parameter bits are missing from the
QP optional mask table. These omissions caused failures when doing XRC QP
state transitions.
For example, when trying to change the response timer of an XRC receive QP
via the RTS2RTS transition, the new timer value was ignored because
MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask
for XRC qps for the RTS2RTS transition.
Fix this by adding the missing XRC optional parameters for all QP
transitions to the opt_mask table.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Fixes: a4774e9095de ("IB/mlx5: Fix opt param mask according to firmware spec") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A stream may specify a rate range using 'rate_min' and 'rate_max', so a
stream may be valid and not specify any rates. However, as stream cannot
be valid and not have any channel. Let's use this condition instead to
determine if a stream is valid or not.
Fixes: cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Packet send checks that msg_name is at least sizeof sockaddr_ll.
Packet recv must return at least this length, so that its output
can be passed unmodified to packet send.
This ceased to be true since adding support for lladdr longer than
sll_addr. Since, the return value uses true address length.
Always return at least sizeof sockaddr_ll, even if address length
is shorter. Zero the padding bytes.
Change v1->v2: do not overwrite zeroed padding again. use copy_len.
Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The "(&ctio->u.status1.sense_data)[i]" where i >= 0 expressions in
qlt_send_resp_ctio() are probably typos and should have been
"(&ctio->u.status1.sense_data[4 * i])" instead. Instead of only fixing
these typos, modify the code for storing sense data such that it becomes
easy to read. This patch fixes a Coverity complaint about accessing an
array outside its bounds.
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Fixes: be25152c0d9e ("qla2xxx: Improve T10-DIF/PI handling in driver.") # v4.11. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When flushing out dirty pages, the fact that we may hit fatal errors
is not a reason to stop writeback. Those errors are reported through
fsync(), not through the flush mechanism.
Fixes: a6598813a4c5b ("NFS: Don't write back further requests if there...") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The error from snd_usb_mixer_apply_create_quirk() is ignored in the
current usb-audio driver code, which will continue the probing even
after the error. Let's take it more serious.
In 2D transfers (for the AXI DMAC), the number of frames (numf) represents
Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful
for video transfers where screen resolutions ( X * Y ) are typically
aligned for X, but not for Y.
There is no requirement for Y_LENGTH to be aligned to the bus-width (or
anything), and this is also true for AXI DMAC.
Checking the Y_LENGTH for alignment causes false errors when initiating DMA
transfers. This change fixes this by checking only that the Y_LENGTH is
non-zero.
Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
NEXTHDR_MAX is 255. What happens here is that we take a u8 value
"hdr->nexthdr" from the network and then look it up in
lowpan_nexthdr_nhcs[]. The problem is that if hdr->nexthdr is 0xff then
we read one element beyond the end of the array so the array needs to
be one element larger.
Fixes: 92aa7c65d295 ("6lowpan: add generic nhc layer interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
are pointing towards the same internal PCS. Therefore nobody is
controlling the internal PCS of eTSEC0.
Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
initialization. But upon an ifdown/ifup sequence, the code path from
ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
failure condition, the PHY driver keeps printing
'803x_aneg_done: SGMII link is not ok'.
Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match
mdio1 device.
Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations. However, the vdso_install target still
builds and installs it. Add the same config condition as is normally
used for the build.
Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This fixes the various compiler warnings when building the msgque
selftest. The primary change is using sys/msg.h instead of linux/msg.h
directly to gain the API declarations.
We find that sysctl_tipc_rmem and named_timeout do not have the right minimum
setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem.
And named_timeout as a timeout setting should be not less than zero.
Fixes: cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf") Fixes: a5325ae5b8bff ("tipc: add name distributor resiliency queue") Signed-off-by: Jie Liu <liujie165@huawei.com> Reported-by: Qiang Ning <ningqiang1@huawei.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently the kfree of output.pointer can be potentially freeing
an uninitalized pointer in the case where out_data is NULL. Fix this
by reworking the case where out_data is not-null to perform the
ACPI status check and also the kfree of outpoint.pointer in one block
and hence ensuring the pointer is only freed when it has been used.
Also replace the if (ptr != NULL) idiom with just if (ptr).
Fixes: ff0e9f26288d ("platform/x86: alienware-wmi: Correct a memory leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Super-IO accesses may fail on a system with no or unmapped LPC bus.
Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.
Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.
Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When setting vport->bw_limit to hdev->tm_info.pg_info[0].bw_limit
in hclge_tm_vport_tc_info_update, vport->bw_limit can be as big as
HCLGE_ETHER_MAX_RATE (100000), which can not fit into u16 (65535).
So this patch fixes it by using u32 for vport->bw_limit.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup
functions. Since these expressions are not serialized against deve->se_lun
assignments each of these expressions may yield a different result. Avoid
that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only
once.
Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: 29a05deebf6c ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
If module initialization fails after the character device has been
registered, unregister the character device. Additionally, avoid
duplicating error path code.
Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: 6a03b4cd78f3 ("[SCSI] qla2xxx: Add char device to increase driver use count") # v2.6.35. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The original driver by default defines num_chipselects as -1.
This actually allicates an array of 65535 entries in
of_spi_register_master.
There is a side-effect for buggy device trees that (contrary to
dt-binding documentation) have no cs-gpio defined.
This mode was never supported by the driver due to limitations
of native cs and additional code complexity and is explicitly
not stated to be implemented.
To keep backwards compatibility with such buggy DTs we limit
the number of chip_selects to 1, as for all practical purposes
it is only ever realistic to use a single chip select in
native cs mode without negative side-effects.
Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked
mode when transfer length is not a multiple of requested bits per word.
unpacked mode transfers fails when the transfer includes partial bytes in
the last word.
Total words to be written/read to/from FIFO is computed based on transfer
length and bits per word. Unpacked mode includes 0 padding bytes for partial
words to align with bits per word and these extra bytes are also accounted
for calculating bytes left to transfer in the current driver.
This causes extra bytes access of tx/rx buffers along with buffer index
position crossing actual length where remain_len becomes negative and due to
unsigned type, negative value is a 32 bit representation of signed value
and transferred bytes never meets the actual transfer length resulting in
transfer timeout and a hang.
This patch fixes this with proper computation of the actual bytes to fill in
FIFO during transmit and the actual bytes to read from FIFO during receive
ignoring 0 padded bytes.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fixes: Clear packed bit when not using packed mode.
Packed bit is not cleared when not using packed mode. This results
in transfer timeouts for the unpacked mode transfers followed by the
packed mode transfers.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
clang warns about a possible variable use that gcc never
complained about:
drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here
[-Werror,-Wuninitialized]
dm365_vpss_set_pg_frame_size(frame_size);
^~~~~~~~~~
drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here
struct vpss_pg_frame_size frame_size;
^
1 error generated.
There is no initialization for this variable at all, and there
has never been one in the mainline kernel, so we really should
not put that stack data into an mmio register.
On the other hand, I suspect that gcc checks the condition
more closely and notices that the global
isif_cfg.bayer.config_params.test_pat_gen flag is initialized
to zero and never written to from any code path, so anything
depending on it can be eliminated.
To shut up the clang warning, just remove the dead code manually,
it has probably never been used because any attempt to do so
would have resulted in undefined behavior.
Commit 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") made
the call to _enable() conditional based on no oh->rst_lines_cnt. This
caused the return value to be potentially uninitialized. Curiously we see
no compiler warnings for this, probably as this gets inlined.
We call _setup_reset() from _setup() and only _setup_postsetup() if the
return value is zero. Currently the return value can be uninitialized for
cases where oh->rst_lines_cnt is set and HWMOD_INIT_NO_RESET is not set.
Fixes: 747834ab8347 ("ARM: OMAP2+: hwmod: revise hardreset behavior") Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This resolves some bugs that affect VIA timer counter accesses.
Avoid lost interrupts caused by reading the counter low byte register.
Make allowance for the fact that the counter will be decremented to
0xFFFF before being reloaded.
When checking the code with clang -Wsometimes-uninitialized we get the
following warning:
if (!tipc_link_is_establishing(l)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:847:46: note: uninitialized use occurs here
tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr);
net/tipc/node.c:831:2: note: remove the 'if' if its condition is always
true
if (!tipc_link_is_establishing(l)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence
this warning
struct tipc_media_addr *maddr;
We fix this by initializing 'maddr' to NULL. For the matter of clarity,
we also test if 'xmitq' is non-empty before we use it and 'maddr'
further down in the function. It will never happen that 'xmitq' is non-
empty at the same time as 'maddr' is NULL, so this is a sufficient test.
Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A statement was originally added in 2006 to shut up a gcc warning,
now but now clang warns about it:
fs/jfs/jfs_txnmgr.c:1932:15: error: variable 'pxd' is uninitialized when used within its own initialization
[-Werror,-Wuninitialized]
pxd_t pxd = pxd; /* truncated extent of xad */
~~~ ^~~
Modern versions of gcc are fine without the silly assignment, so just
drop it. Tested with gcc-4.6 (released 2011), 4.7, 4.8, and 4.9.
Fixes: c9e3ad6021e5 ("JFS: Get rid of "may be used uninitialized" warnings") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.
Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT
0000 1.35 0100 1.8 1000 2.3 1100 2.85
0001 1.5 0101 1.9 1001 2.4 1101 3.0
0010 1.6 0110 2.0 1010 2.5 1110 3.3
0011 1.7 0111 2.1 1011 2.6 1111 Not Used
Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Checking of kmalloc() seems to have been committed - as
cx23885_dvb_register() is checking for != 0 return, returning
-ENOMEM should be fine here. While at it address the coccicheck
suggestion to move to kmemdup rather than using kmalloc+memcpy.
Fixes: 46b21bbaa8a8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>