ceph/src/boost/tools/build/src/engine/boehm_gc/EMX_MAKEFILE

   1 #
   2 #  OS/2 specific Makefile for the EMX environment
   3 #
   4 #  You need GNU Make 3.71, gcc 2.5.7, emx 0.8h and GNU fileutils 3.9
   5 #  or similar tools. C++ interface and de.exe weren't tested.
   6 #
   7 #  Rename this file "Makefile".
   8 #
   9
  10 # Primary targets:
  11 # gc.a - builds basic library
  12 # c++ - adds C++ interface to library and include directory
  13 # cords - adds cords (heavyweight strings) to library and include directory
  14 # test - prints porting information, then builds basic version of gc.a, and runs
  15 #        some tests of collector and cords.  Does not add cords or c++ interface to gc.a
  16 # cord/de.exe - builds dumb editor based on cords.
  17 CC= gcc
  18 CXX=g++
  19 # Needed only for "make c++", which adds the c++ interface
  20
  21 CFLAGS= -O -DALL_INTERIOR_POINTERS
  22 # Setjmp_test may yield overly optimistic results when compiled
  23 # without optimization.
  24 # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
  25 #   altered stubborn objects, at substantial performance cost.
  26 # -DFIND_LEAK causes the collector to assume that all inaccessible
  27 #   objects should have been explicitly deallocated, and reports exceptions
  28 # -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
  29 #   (Clients should also define SOLARIS_THREADS and then include
  30 #   gc.h before performing thr_ or GC_ operations.)
  31 # -DALL_INTERIOR_POINTERS allows all pointers to the interior
  32 #   of objects to be recognized.  (See gc_private.h for consequences.)
  33 # -DSMALL_CONFIG tries to tune the collector for small heap sizes,
  34 #   usually causing it to use less space in such situations.
  35 #   Incremental collection no longer works in this case.
  36 # -DDONT_ADD_BYTE_AT_END is meaningful only with
  37 #   -DALL_INTERIOR_POINTERS.  Normally -DALL_INTERIOR_POINTERS
  38 #   causes all objects to be padded so that pointers just past the end of
  39 #   an object can be recognized.  This can be expensive.  (The padding
  40 #   is normally more than one byte due to alignment constraints.)
  41 #   -DDONT_ADD_BYTE_AT_END disables the padding.
  42
  43 AR= ar
  44 RANLIB= ar s
  45
  46 # Redefining srcdir allows object code for the nonPCR version of the collector
  47 # to be generated in different directories
  48 srcdir = .
  49 VPATH = $(srcdir)
  50
  51 OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dyn_load.o dbg_mlc.o malloc.o stubborn.o checksums.o typd_mlc.o ptr_chck.o mallocx.o
  52
  53 CORD_OBJS=  cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
  54
  55 CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
  56            $(srcdir)/cord/cord_pos.h
  57
  58 # Libraries needed for curses applications.  Only needed for de.
  59 CURSES= -lcurses -ltermlib
  60
  61 # The following is irrelevant on most systems.  But a few
  62 # versions of make otherwise fork the shell specified in
  63 # the SHELL environment variable.
  64 SHELL= bash
  65
  66 SPECIALCFLAGS =
  67 # Alternative flags to the C compiler for mach_dep.c.
  68 # Mach_dep.c often doesn't like optimization, and it's
  69 # not time-critical anyway.
  70
  71 all: gc.a gctest.exe
  72
  73 $(OBJS) test.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \
  74     $(srcdir)/gcconfig.h $(srcdir)/gc_typed.h
  75 # The dependency on Makefile is needed.  Changing
  76 # options affects the size of GC_arrays,
  77 # invalidating all .o files that rely on gc_priv.h
  78
  79 mark.o typd_mlc.o finalize.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
  80
  81 gc.a: $(OBJS)
  82         $(AR) ru gc.a $(OBJS)
  83         $(RANLIB) gc.a
  84
  85 cords: $(CORD_OBJS) cord/cordtest.exe
  86         $(AR) ru gc.a $(CORD_OBJS)
  87         $(RANLIB) gc.a
  88         cp $(srcdir)/cord/cord.h include/cord.h
  89         cp $(srcdir)/cord/ec.h include/ec.h
  90         cp $(srcdir)/cord/cord_pos.h include/cord_pos.h
  91
  92 gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h
  93         $(CXX) -c -O $(srcdir)/gc_cpp.cc
  94
  95 c++: gc_cpp.o $(srcdir)/gc_cpp.h
  96         $(AR) ru gc.a gc_cpp.o
  97         $(RANLIB) gc.a
  98         cp $(srcdir)/gc_cpp.h include/gc_cpp.h
  99
 100 mach_dep.o: $(srcdir)/mach_dep.c
 101         $(CC) -o mach_dep.o -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
 102
 103 mark_rts.o: $(srcdir)/mark_rts.c
 104         $(CC) -o mark_rts.o -c $(CFLAGS) $(srcdir)/mark_rts.c
 105
 106 cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
 107         $(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c -o  cord/cordbscs.o
 108
 109 cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
 110         $(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c -o  cord/cordxtra.o
 111
 112 cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
 113         $(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c -o cord/cordprnt.o
 114
 115 cord/cordtest.exe: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
 116         $(CC) $(CFLAGS) -o cord/cordtest.exe $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
 117
 118 cord/de.exe: $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a
 119         $(CC) $(CFLAGS) -o cord/de.exe $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a $(CURSES)
 120
 121 clean:
 122         rm -f gc.a tests/test.o gctest.exe output-local output-diff $(OBJS) \
 123               setjmp_test  mon.out gmon.out a.out core \
 124               $(CORD_OBJS) cord/cordtest.exe cord/de.exe
 125         -rm -f *~
 126
 127 gctest.exe: tests/test.o gc.a
 128         $(CC) $(CFLAGS) -o gctest.exe tests/test.o gc.a
 129
 130 # If an optimized setjmp_test generates a segmentation fault,
 131 # odds are your compiler is broken.  Gctest may still work.
 132 # Try compiling setjmp_t.c unoptimized.
 133 setjmp_test.exe: $(srcdir)/setjmp_t.c $(srcdir)/gc.h
 134         $(CC) $(CFLAGS) -o setjmp_test.exe $(srcdir)/setjmp_t.c
 135
 136 test: setjmp_test.exe gctest.exe
 137         ./setjmp_test
 138         ./gctest
 139         make cord/cordtest.exe
 140         cord/cordtest