[mirror_edk2.git] / ArmPlatformPkg / ArmJunoPkg / ArmJuno.fdf

#\r
#  Copyright (c) 2013-2014, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.BL33_AP_UEFI]\r
BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0xF0\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x000F0000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
\r
  #\r
  # ACPI Support\r
  #\r
  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
  INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf\r
\r
  # NOR Flash driver\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
\r
  # Versatile Express FileSystem\r
  INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  # FV FileSystem\r
  INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
\r
  #\r
  # Usb Support\r
  #\r
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf\r
\r
  #\r
  # Networking stack\r
  #\r
  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
  INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf\r
\r
  #\r
  # UEFI applications\r
  #\r
  INF ShellBinPkg/UefiShell/UefiShell.inf\r
\r
  #\r
  # Juno platform driver\r
  #\r
  INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
#\r
# These SEC rules are used for ArmPlatformPkg/PrePi module.\r
# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the\r
# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint\r
#\r
[Rule.ARM.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.AARCH64.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
# A shim specific rule is required to ensure the alignment is 4K.\r
# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)\r
[Rule.ARM.SEC.SHIM]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
9f38945f OM	1	#\r
	2	# Copyright (c) 2013-2014, ARM Limited. All rights reserved.\r
	3	#\r
	4	# This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.BL33_AP_UEFI]\r
	28	BaseAddress = 0xE0000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	29	Size = 0x000F0000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
	34	NumBlocks = 0xF0\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x000F0000\r
	53	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	54	FV = FVMAIN_COMPACT\r
	55	\r
	56	\r
	57	################################################################################\r
	58	#\r
	59	# FV Section\r
	60	#\r
	61	# [FV] section is used to define what components or modules are placed within a flash\r
	62	# device file. This section also defines order the components and modules are positioned\r
	63	# within the image. The [FV] section consists of define statements, set statements and\r
	64	# module statements.\r
65	#\r
66	################################################################################\r
67	\r
68	[FV.FvMain]\r
69	BlockSize = 0x40\r
70	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
71	FvAlignment = 8 # FV alignment and FV attributes setting.\r
72	ERASE_POLARITY = 1\r
73	MEMORY_MAPPED = TRUE\r
74	STICKY_WRITE = TRUE\r
75	LOCK_CAP = TRUE\r
76	LOCK_STATUS = TRUE\r
77	WRITE_DISABLED_CAP = TRUE\r
78	WRITE_ENABLED_CAP = TRUE\r
79	WRITE_STATUS = TRUE\r
80	WRITE_LOCK_CAP = TRUE\r
81	WRITE_LOCK_STATUS = TRUE\r
82	READ_DISABLED_CAP = TRUE\r
83	READ_ENABLED_CAP = TRUE\r
84	READ_STATUS = TRUE\r
85	READ_LOCK_CAP = TRUE\r
86	READ_LOCK_STATUS = TRUE\r
87	\r
88	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
89	\r
90	#\r
91	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
92	#\r
93	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
94	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
95	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
96	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
97	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
98	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
99	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
100	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
101	\r
102	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
103	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
104	\r
05e56470 OM	105	#\r
	106	# ACPI Support\r
	107	#\r
	108	INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
	109	\r
9f38945f OM	110	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
	111	\r
	112	#\r
	113	# Multiple Console IO support\r
	114	#\r
	115	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
	116	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
	117	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
	118	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
	119	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
	120	\r
	121	INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
	122	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
0b4d97a0	123	INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf\r
9f38945f OM	124	\r
	125	# NOR Flash driver\r
	126	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
	127	\r
	128	# Versatile Express FileSystem\r
	129	INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
	130	\r
	131	#\r
	132	# FAT filesystem + GPT/MBR partitioning\r
	133	#\r
	134	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	135	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	136	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
	137	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	138	\r
901b4516 OM	139	# FV FileSystem\r
	140	INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
	141	\r
9f38945f OM	142	#\r
	143	# Usb Support\r
	144	#\r
	145	INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
	146	INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
	147	INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
	148	INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
	149	INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf\r
	150	\r
	151	#\r
	152	# Networking stack\r
	153	#\r
	154	INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
	155	INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
	156	INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
	157	INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
	158	INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
	159	INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
	160	INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
	161	INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
	162	INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
	163	INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
	164	INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
	165	INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
	166	INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf\r
	167	\r
	168	#\r
	169	# UEFI applications\r
	170	#\r
	171	INF ShellBinPkg/UefiShell/UefiShell.inf\r
	172	\r
	173	#\r
	174	# Juno platform driver\r
	175	#\r
	176	INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf\r
	177	\r
	178	#\r
	179	# Bds\r
	180	#\r
	181	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	182	INF ArmPlatformPkg/Bds/Bds.inf\r
	183	\r
	184	[FV.FVMAIN_COMPACT]\r
	185	FvAlignment = 8\r
	186	ERASE_POLARITY = 1\r
	187	MEMORY_MAPPED = TRUE\r
	188	STICKY_WRITE = TRUE\r
	189	LOCK_CAP = TRUE\r
	190	LOCK_STATUS = TRUE\r
	191	WRITE_DISABLED_CAP = TRUE\r
	192	WRITE_ENABLED_CAP = TRUE\r
	193	WRITE_STATUS = TRUE\r
	194	WRITE_LOCK_CAP = TRUE\r
	195	WRITE_LOCK_STATUS = TRUE\r
	196	READ_DISABLED_CAP = TRUE\r
	197	READ_ENABLED_CAP = TRUE\r
	198	READ_STATUS = TRUE\r
	199	READ_LOCK_CAP = TRUE\r
	200	READ_LOCK_STATUS = TRUE\r
	201	\r
	202	INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
	203	\r
	204	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	205	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
206	SECTION FV_IMAGE = FVMAIN\r
207	}\r
208	}\r
209	\r
210	\r
211	################################################################################\r
212	#\r
213	# Rules are use with the [FV] section's module INF type to define\r
214	# how an FFS file is created for a given INF file. The following Rule are the default\r
215	# rules for the different module type. User can add the customized rules to define the\r
216	# content of the FFS file.\r
217	#\r
218	################################################################################\r
219	\r
220	\r
221	############################################################################\r
222	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
223	############################################################################\r
224	#\r
225	#[Rule.Common.DXE_DRIVER]\r
226	# FILE DRIVER = $(NAMED_GUID) {\r
227	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
228	# COMPRESS PI_STD {\r
229	# GUIDED {\r
230	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
231	# UI STRING="$(MODULE_NAME)" Optional\r
232	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
233	# }\r
234	# }\r
235	# }\r
236	#\r
237	############################################################################\r
238	\r
239	#\r
240	# These SEC rules are used for ArmPlatformPkg/PrePi module.\r
241	# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the\r
242	# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint\r
243	#\r
244	[Rule.ARM.SEC]\r
245	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
246	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
247	}\r
248	\r
249	[Rule.AARCH64.SEC]\r
250	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
251	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
252	}\r
253	\r
254	# A shim specific rule is required to ensure the alignment is 4K.\r
255	# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)\r
256	[Rule.ARM.SEC.SHIM]\r
257	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
258	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
259	}\r
260	\r
261	[Rule.Common.PEI_CORE]\r
262	FILE PEI_CORE = $(NAMED_GUID) {\r
263	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
264	UI STRING ="$(MODULE_NAME)" Optional\r
265	}\r
266	\r
267	[Rule.Common.PEIM]\r
268	FILE PEIM = $(NAMED_GUID) {\r
269	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
270	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
271	UI STRING="$(MODULE_NAME)" Optional\r
272	}\r
273	\r
274	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
275	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
276	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
277	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
278	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
279	UI STRING="$(MODULE_NAME)" Optional\r
280	}\r
281	}\r
282	\r
283	[Rule.Common.DXE_CORE]\r
284	FILE DXE_CORE = $(NAMED_GUID) {\r
285	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
286	UI STRING="$(MODULE_NAME)" Optional\r
287	}\r
288	\r
289	[Rule.Common.UEFI_DRIVER]\r
290	FILE DRIVER = $(NAMED_GUID) {\r
291	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
292	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
293	UI STRING="$(MODULE_NAME)" Optional\r
294	}\r
295	\r
296	[Rule.Common.DXE_DRIVER]\r
297	FILE DRIVER = $(NAMED_GUID) {\r
298	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
299	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
300	UI STRING="$(MODULE_NAME)" Optional\r
301	}\r
302	\r
303	[Rule.Common.DXE_RUNTIME_DRIVER]\r
304	FILE DRIVER = $(NAMED_GUID) {\r
305	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
306	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
307	UI STRING="$(MODULE_NAME)" Optional\r
308	}\r
309	\r
310	[Rule.Common.UEFI_APPLICATION]\r
311	FILE APPLICATION = $(NAMED_GUID) {\r
312	UI STRING ="$(MODULE_NAME)" Optional\r
313	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
314	}\r
315	\r
316	[Rule.Common.UEFI_DRIVER.BINARY]\r
317	FILE DRIVER = $(NAMED_GUID) {\r
318	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
319	PE32 PE32 \|.efi\r
320	UI STRING="$(MODULE_NAME)" Optional\r
321	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
322	}\r
323	\r
324	[Rule.Common.UEFI_APPLICATION.BINARY]\r
325	FILE APPLICATION = $(NAMED_GUID) {\r
326	PE32 PE32 \|.efi\r
327	UI STRING="$(MODULE_NAME)" Optional\r
328	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
329	}\r