OVMF: Use optimized BaseMemoryLib libraries

[mirror_edk2.git] / OvmfPkg / OvmfPkgIa32X64.fdf

#/** @file\r
#  Open Virtual Machine Firmware: FDF\r
#\r
#  Copyright (c) 2006 - 2009, Intel Corporation\r
#\r
#  All rights reserved. This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution. The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
#**/\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
[FD.OVMF]\r
BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.\r
Size          = 0x00200000     # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x10000\r
NumBlocks     = 0x20\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
0x0|0x200000\r
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
FV = MAINFV\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
[FV.DXEFV]\r
BlockSize          = 0x1000\r
FvAlignment        = 16         #FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
#\r
# Files to be placed in DXEFV\r
#\r
# This firmware volume will have files placed in it uncompressed,\r
# and then then entire firmware volume will be compressed in a\r
# single compression operation in order to achieve better\r
# overall compression.\r
#\r
\r
APRIORI DXE {\r
  INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
  INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
}\r
\r
#\r
# DXE Phase modules\r
#\r
INF  MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
\r
INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
INF  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf\r
INF  UefiCpuPkg/CpuDxe/CpuDxe.inf\r
INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf\r
INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf\r
INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf\r
INF  MdeModulePkg/Universal/Metronome/Metronome.inf\r
INF  PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf\r
\r
INF  OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf\r
INF  MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
INF  MdeModulePkg/Universal/PrintDxe/PrintDxe.inf\r
INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
\r
INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
\r
INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
\r
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
    SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi\r
  }\r
\r
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {\r
    SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi\r
  }\r
\r
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
      SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
    }\r
  }\r
\r
################################################################################\r
\r
[FV.MAINFV]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
#\r
# Files to be placed in MAINFV\r
#\r
# This firmware volume will have all the files placed in it which\r
# must not be compressed at the initial boot phase.  The only\r
# exception to this is the compressed 'DXEFV'.\r
#\r
\r
APRIORI PEI {\r
  INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
}\r
\r
#\r
#  SEC Phase modules\r
#\r
INF  OvmfPkg/Sec/SecMain.inf\r
\r
#\r
#  PEI Phase modules\r
#\r
INF  MdeModulePkg/Core/Pei/PeiMain.inf\r
INF  RuleOverride=NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
INF  RuleOverride=NORELOC IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
INF  RuleOverride=NORELOC OvmfPkg/PlatformPei/PlatformPei.inf\r
INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
#\r
# This file contains the compressed 'DXEFV', which is compressed\r
# in a single compression operation in order to achieve better\r
# overall compression.\r
#\r
FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
   SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
      SECTION FV_IMAGE = DXEFV\r
   }\r
 }\r
\r
FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {\r
    SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    PE32     PE32   Align=32    |.efi\r
    UI       STRING ="$(MODULE_NAME)" Optional\r
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) {\r
    PE32     PE32           |.efi\r
    UI       STRING ="$(MODULE_NAME)" Optional\r
    VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.PEIM.NORELOC]\r
  FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED  {\r
     PEI_DEPEX PEI_DEPEX Optional        |.depex\r
     TE        TE                        |.efi\r
     UI        STRING="$(MODULE_NAME)" Optional\r
     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional        |.depex\r
     PE32      PE32   Align=32           |.efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) {\r
    PEI_DEPEX PEI_DEPEX Optional         |.depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                     |.efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32           |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX Optional      |.depex\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32     PE32                    |.efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
    VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.USER_DEFINED.ACPITABLE]\r
  FILE FREEFORM = $(NAMED_GUID) {\r
    RAW ACPI               |.acpi\r
    RAW ASL                |.aml\r
  }\r
\r
[Rule.Common.SEC.RESET_VECTOR]\r
  FILE RAW = $(NAMED_GUID) {\r
    RAW RAW                |.raw\r
  }\r
\r
[OptionRom.CirrusLogic5446]\r
INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {\r
    PCI_DEVICE_ID  = 0x00B8\r
  }\r
\r