QuarkPlatformPkg: Add new package for Galileo boards

[mirror_edk2.git] / QuarkPlatformPkg / Platform / Pei / PlatformInit / PlatformErratas.c

/** @file\r
Platform Erratas performed by early init PEIM driver.\r
\r
Copyright (c) 2013 Intel Corporation.\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include "CommonHeader.h"\r
#include "PlatformEarlyInit.h"\r
\r
//\r
// Constants.\r
//\r
\r
//\r
// Platform EHCI Packet Buffer OUT/IN Thresholds, values in number of DWORDs.\r
//\r
#define EHCI_OUT_THRESHOLD_VALUE              (0x7f)\r
#define EHCI_IN_THRESHOLD_VALUE               (0x7f)\r
\r
//\r
// Platform init USB device interrupt masks.\r
//\r
#define V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG    (0x0000007f)\r
#define V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG   (B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_OUT_EP_MASK | B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_IN_EP_MASK)\r
\r
//\r
// Global variables defined within this source module.\r
//\r
\r
UINTN IohEhciPciReg[IOH_MAX_EHCI_USB_CONTROLLERS] = {\r
  PCI_LIB_ADDRESS (IOH_USB_BUS_NUMBER, IOH_USB_EHCI_DEVICE_NUMBER, IOH_EHCI_FUNCTION_NUMBER, 0),\r
};\r
\r
UINTN IohUsbDevicePciReg[IOH_MAX_USBDEVICE_USB_CONTROLLERS] = {\r
  PCI_LIB_ADDRESS (IOH_USB_BUS_NUMBER, IOH_USBDEVICE_DEVICE_NUMBER, IOH_USBDEVICE_FUNCTION_NUMBER, 0),\r
};\r
\r
//\r
// Routines local to this source module.\r
//\r
\r
/** Perform USB erratas after MRC init.\r
\r
**/\r
VOID\r
PlatformUsbErratasPostMrc (\r
  VOID\r
  )\r
{\r
  UINT32                            Index;\r
  UINT32                            TempBar0Addr;\r
  UINT16                            SaveCmdReg;\r
  UINT32                            SaveBar0Reg;\r
\r
  TempBar0Addr = PcdGet32(PcdPeiQNCUsbControllerMemoryBaseAddress);\r
\r
  //\r
  // Apply EHCI controller erratas.\r
  //\r
  for (Index = 0; Index < IOH_MAX_EHCI_USB_CONTROLLERS; Index++, TempBar0Addr += IOH_USB_CONTROLLER_MMIO_RANGE) {\r
\r
    if ((PciRead16 (IohEhciPciReg[Index] + R_IOH_USB_VENDOR_ID)) != V_IOH_USB_VENDOR_ID) {\r
      continue;  // Device not enabled, skip.\r
    }\r
\r
    //\r
    // Save current settings for PCI CMD/BAR0 registers\r
    //\r
    SaveCmdReg = PciRead16 (IohEhciPciReg[Index] + R_IOH_USB_COMMAND);\r
    SaveBar0Reg = PciRead32 (IohEhciPciReg[Index] + R_IOH_USB_MEMBAR);\r
\r
    //\r
    // Temp. assign base address register, Enable Memory Space.\r
    //\r
    PciWrite32 ((IohEhciPciReg[Index] + R_IOH_USB_MEMBAR), TempBar0Addr);\r
    PciWrite16 (IohEhciPciReg[Index] + R_IOH_USB_COMMAND, SaveCmdReg | B_IOH_USB_COMMAND_MSE);\r
\r
\r
    //\r
    // Set packet buffer OUT/IN thresholds.\r
    //\r
    MmioAndThenOr32 (\r
      TempBar0Addr + R_IOH_EHCI_INSNREG01,\r
      (UINT32) (~(B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_MASK | B_IOH_EHCI_INSNREG01_IN_THRESHOLD_MASK)),\r
      (UINT32) ((EHCI_OUT_THRESHOLD_VALUE << B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_BP) | (EHCI_IN_THRESHOLD_VALUE << B_IOH_EHCI_INSNREG01_IN_THRESHOLD_BP))\r
      );\r
\r
    //\r
    // Restore settings for PCI CMD/BAR0 registers\r
    //\r
    PciWrite32 ((IohEhciPciReg[Index] + R_IOH_USB_MEMBAR), SaveBar0Reg);\r
    PciWrite16 (IohEhciPciReg[Index] + R_IOH_USB_COMMAND, SaveCmdReg);\r
  }\r
\r
  //\r
  // Apply USB device controller erratas.\r
  //\r
  for (Index = 0; Index < IOH_MAX_USBDEVICE_USB_CONTROLLERS; Index++, TempBar0Addr += IOH_USB_CONTROLLER_MMIO_RANGE) {\r
\r
    if ((PciRead16 (IohUsbDevicePciReg[Index] + R_IOH_USB_VENDOR_ID)) != V_IOH_USB_VENDOR_ID) {\r
      continue;  // Device not enabled, skip.\r
    }\r
\r
    //\r
    // Save current settings for PCI CMD/BAR0 registers\r
    //\r
    SaveCmdReg = PciRead16 (IohUsbDevicePciReg[Index] + R_IOH_USB_COMMAND);\r
    SaveBar0Reg = PciRead32 (IohUsbDevicePciReg[Index] + R_IOH_USB_MEMBAR);\r
\r
    //\r
    // Temp. assign base address register, Enable Memory Space.\r
    //\r
    PciWrite32 ((IohUsbDevicePciReg[Index] + R_IOH_USB_MEMBAR), TempBar0Addr);\r
    PciWrite16 (IohUsbDevicePciReg[Index] + R_IOH_USB_COMMAND, SaveCmdReg | B_IOH_USB_COMMAND_MSE);\r
\r
    //\r
    // Erratas for USB Device interrupt registers.\r
    //\r
\r
    //\r
    // 1st Mask interrupts.\r
    //\r
    MmioWrite32 (\r
      TempBar0Addr + R_IOH_USBDEVICE_D_INTR_MSK_UDC_REG,\r
      V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG\r
      );\r
    //\r
    // 2nd RW/1C of equivalent status bits.\r
    //\r
    MmioWrite32 (\r
      TempBar0Addr + R_IOH_USBDEVICE_D_INTR_UDC_REG,\r
      V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG\r
      );\r
\r
    //\r
    // 1st Mask end point interrupts.\r
    //\r
    MmioWrite32 (\r
      TempBar0Addr + R_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG,\r
      V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG\r
      );\r
    //\r
    // 2nd RW/1C of equivalent end point status bits.\r
    //\r
    MmioWrite32 (\r
      TempBar0Addr + R_IOH_USBDEVICE_EP_INTR_UDC_REG,\r
      V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG\r
      );\r
\r
    //\r
    // Restore settings for PCI CMD/BAR0 registers\r
    //\r
    PciWrite32 ((IohUsbDevicePciReg[Index] + R_IOH_USB_MEMBAR), SaveBar0Reg);\r
    PciWrite16 (IohUsbDevicePciReg[Index] + R_IOH_USB_COMMAND, SaveCmdReg);\r
  }\r
}\r
\r
//\r
// Routines exported by this source module.\r
//\r
\r
/** Perform Platform Erratas after MRC.\r
\r
  @retval   EFI_SUCCESS               Operation success.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
PlatformErratasPostMrc (\r
  VOID\r
  )\r
{\r
  PlatformUsbErratasPostMrc ();\r
  return EFI_SUCCESS;\r
}\r