UefiCpuPkg: Apply uncrustify changes

[mirror_edk2.git] / UefiCpuPkg / SecCore / FindPeiCore.c

/** @file\r
  Locate the entry point for the PEI Core\r
\r
  Copyright (c) 2008 - 2019, Intel Corporation. All rights reserved.<BR>\r
  SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#include <PiPei.h>\r
\r
#include "SecMain.h"\r
\r
/**\r
  Find core image base.\r
\r
  @param   FirmwareVolumePtr        Point to the firmware volume for finding core image.\r
  @param   FileType                 The FileType for searching, either SecCore or PeiCore.\r
  @param   CoreImageBase            The base address of the core image.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
FindImageBase (\r
  IN  EFI_FIRMWARE_VOLUME_HEADER  *FirmwareVolumePtr,\r
  IN  EFI_FV_FILETYPE             FileType,\r
  OUT EFI_PHYSICAL_ADDRESS        *CoreImageBase\r
  )\r
{\r
  EFI_PHYSICAL_ADDRESS       CurrentAddress;\r
  EFI_PHYSICAL_ADDRESS       EndOfFirmwareVolume;\r
  EFI_FFS_FILE_HEADER        *File;\r
  UINT32                     Size;\r
  EFI_PHYSICAL_ADDRESS       EndOfFile;\r
  EFI_COMMON_SECTION_HEADER  *Section;\r
  EFI_PHYSICAL_ADDRESS       EndOfSection;\r
\r
  *CoreImageBase = 0;\r
\r
  CurrentAddress      = (EFI_PHYSICAL_ADDRESS)(UINTN)FirmwareVolumePtr;\r
  EndOfFirmwareVolume = CurrentAddress + FirmwareVolumePtr->FvLength;\r
\r
  //\r
  // Loop through the FFS files in the Boot Firmware Volume\r
  //\r
  for (EndOfFile = CurrentAddress + FirmwareVolumePtr->HeaderLength; ; ) {\r
    CurrentAddress = (EndOfFile + 7) & 0xfffffffffffffff8ULL;\r
    if (CurrentAddress > EndOfFirmwareVolume) {\r
      return EFI_NOT_FOUND;\r
    }\r
\r
    File = (EFI_FFS_FILE_HEADER *)(UINTN)CurrentAddress;\r
    if (IS_FFS_FILE2 (File)) {\r
      Size = FFS_FILE2_SIZE (File);\r
      if (Size <= 0x00FFFFFF) {\r
        return EFI_NOT_FOUND;\r
      }\r
    } else {\r
      Size = FFS_FILE_SIZE (File);\r
      if (Size < sizeof (EFI_FFS_FILE_HEADER)) {\r
        return EFI_NOT_FOUND;\r
      }\r
    }\r
\r
    EndOfFile = CurrentAddress + Size;\r
    if (EndOfFile > EndOfFirmwareVolume) {\r
      return EFI_NOT_FOUND;\r
    }\r
\r
    //\r
    // Look for particular Core file (either SEC Core or PEI Core)\r
    //\r
    if (File->Type != FileType) {\r
      continue;\r
    }\r
\r
    //\r
    // Loop through the FFS file sections within the FFS file\r
    //\r
    if (IS_FFS_FILE2 (File)) {\r
      EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN)((UINT8 *)File + sizeof (EFI_FFS_FILE_HEADER2));\r
    } else {\r
      EndOfSection = (EFI_PHYSICAL_ADDRESS)(UINTN)((UINT8 *)File + sizeof (EFI_FFS_FILE_HEADER));\r
    }\r
\r
    for ( ; ;) {\r
      CurrentAddress = (EndOfSection + 3) & 0xfffffffffffffffcULL;\r
      Section        = (EFI_COMMON_SECTION_HEADER *)(UINTN)CurrentAddress;\r
\r
      if (IS_SECTION2 (Section)) {\r
        Size = SECTION2_SIZE (Section);\r
        if (Size <= 0x00FFFFFF) {\r
          return EFI_NOT_FOUND;\r
        }\r
      } else {\r
        Size = SECTION_SIZE (Section);\r
        if (Size < sizeof (EFI_COMMON_SECTION_HEADER)) {\r
          return EFI_NOT_FOUND;\r
        }\r
      }\r
\r
      EndOfSection = CurrentAddress + Size;\r
      if (EndOfSection > EndOfFile) {\r
        return EFI_NOT_FOUND;\r
      }\r
\r
      //\r
      // Look for executable sections\r
      //\r
      if ((Section->Type == EFI_SECTION_PE32) || (Section->Type == EFI_SECTION_TE)) {\r
        if (File->Type == FileType) {\r
          if (IS_SECTION2 (Section)) {\r
            *CoreImageBase = (PHYSICAL_ADDRESS)(UINTN)((UINT8 *)Section + sizeof (EFI_COMMON_SECTION_HEADER2));\r
          } else {\r
            *CoreImageBase = (PHYSICAL_ADDRESS)(UINTN)((UINT8 *)Section + sizeof (EFI_COMMON_SECTION_HEADER));\r
          }\r
        }\r
\r
        break;\r
      }\r
    }\r
\r
    //\r
    // Either SEC Core or PEI Core images found\r
    //\r
    if (*CoreImageBase != 0) {\r
      return EFI_SUCCESS;\r
    }\r
  }\r
}\r
\r
/**\r
  Find and return Pei Core entry point.\r
\r
  It also find SEC and PEI Core file debug information. It will report them if\r
  remote debug is enabled.\r
\r
  @param   SecCoreFirmwareVolumePtr Point to the firmware volume for finding SecCore.\r
  @param   PeiCoreFirmwareVolumePtr Point to the firmware volume for finding PeiCore.\r
  @param   PeiCoreEntryPoint        The entry point of the PEI core.\r
\r
**/\r
VOID\r
EFIAPI\r
FindAndReportEntryPoints (\r
  IN  EFI_FIRMWARE_VOLUME_HEADER  *SecCoreFirmwareVolumePtr,\r
  IN  EFI_FIRMWARE_VOLUME_HEADER  *PeiCoreFirmwareVolumePtr,\r
  OUT EFI_PEI_CORE_ENTRY_POINT    *PeiCoreEntryPoint\r
  )\r
{\r
  EFI_STATUS                    Status;\r
  EFI_PHYSICAL_ADDRESS          SecCoreImageBase;\r
  EFI_PHYSICAL_ADDRESS          PeiCoreImageBase;\r
  PE_COFF_LOADER_IMAGE_CONTEXT  ImageContext;\r
\r
  //\r
  // Find SEC Core image base\r
  //\r
  Status = FindImageBase (SecCoreFirmwareVolumePtr, EFI_FV_FILETYPE_SECURITY_CORE, &SecCoreImageBase);\r
  ASSERT_EFI_ERROR (Status);\r
\r
  ZeroMem ((VOID *)&ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT));\r
  //\r
  // Report SEC Core debug information when remote debug is enabled\r
  //\r
  ImageContext.ImageAddress = SecCoreImageBase;\r
  ImageContext.PdbPointer   = PeCoffLoaderGetPdbPointer ((VOID *)(UINTN)ImageContext.ImageAddress);\r
  PeCoffLoaderRelocateImageExtraAction (&ImageContext);\r
\r
  //\r
  // Find PEI Core image base\r
  //\r
  Status = FindImageBase (PeiCoreFirmwareVolumePtr, EFI_FV_FILETYPE_PEI_CORE, &PeiCoreImageBase);\r
  ASSERT_EFI_ERROR (Status);\r
\r
  //\r
  // Report PEI Core debug information when remote debug is enabled\r
  //\r
  ImageContext.ImageAddress = PeiCoreImageBase;\r
  ImageContext.PdbPointer   = PeCoffLoaderGetPdbPointer ((VOID *)(UINTN)ImageContext.ImageAddress);\r
  PeCoffLoaderRelocateImageExtraAction (&ImageContext);\r
\r
  //\r
  // Find PEI Core entry point\r
  //\r
  Status = PeCoffLoaderGetEntryPoint ((VOID *)(UINTN)PeiCoreImageBase, (VOID **)PeiCoreEntryPoint);\r
  if (EFI_ERROR (Status)) {\r
    *PeiCoreEntryPoint = 0;\r
  }\r
\r
  return;\r
}\r