ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf

   1 #
   2 #  Copyright (c) 2013-2014, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.BL33_AP_UEFI]
  28 BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0xF0
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x000F0000
  53 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  54 FV = FVMAIN_COMPACT
  55
  56
  57 ################################################################################
  58 #
  59 # FV Section
  60 #
  61 # [FV] section is used to define what components or modules are placed within a flash
  62 # device file.  This section also defines order the components and modules are positioned
  63 # within the image.  The [FV] section consists of define statements, set statements and
  64 # module statements.
  65 #
  66 ################################################################################
  67
  68 [FV.FvMain]
  69 BlockSize          = 0x40
  70 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  71 FvAlignment        = 8         # FV alignment and FV attributes setting.
  72 ERASE_POLARITY     = 1
  73 MEMORY_MAPPED      = TRUE
  74 STICKY_WRITE       = TRUE
  75 LOCK_CAP           = TRUE
  76 LOCK_STATUS        = TRUE
  77 WRITE_DISABLED_CAP = TRUE
  78 WRITE_ENABLED_CAP  = TRUE
  79 WRITE_STATUS       = TRUE
  80 WRITE_LOCK_CAP     = TRUE
  81 WRITE_LOCK_STATUS  = TRUE
  82 READ_DISABLED_CAP  = TRUE
  83 READ_ENABLED_CAP   = TRUE
  84 READ_STATUS        = TRUE
  85 READ_LOCK_CAP      = TRUE
  86 READ_LOCK_STATUS   = TRUE
  87
  88   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  89
  90   #
  91   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  92   #
  93   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  94   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  95   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  96   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  97   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
  98   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  99   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 100   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 101
 102   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 103   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 104
 105   #
 106   # ACPI Support
 107   #
 108   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 109
 110   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 111
 112   #
 113   # Multiple Console IO support
 114   #
 115   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 116   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 117   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 118   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 119   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 120
 121   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 122   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 123   INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
 124
 125   # NOR Flash driver
 126   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 127
 128   # Versatile Express FileSystem
 129   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 130
 131   #
 132   # FAT filesystem + GPT/MBR partitioning
 133   #
 134   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 135   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 136   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 137   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 138
 139   # FV FileSystem
 140   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 141
 142   #
 143   # Usb Support
 144   #
 145   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 146   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 147   INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
 148   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 149   INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
 150
 151   #
 152   # Networking stack
 153   #
 154   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 155   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 156   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 157   INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
 158   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 159   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 160   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 161   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 162   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 163   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 164   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 165   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 166   INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf
 167
 168   #
 169   # UEFI applications
 170   #
 171   INF ShellBinPkg/UefiShell/UefiShell.inf
 172
 173   #
 174   # Juno platform driver
 175   #
 176   INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf
 177
 178   #
 179   # Bds
 180   #
 181   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 182   INF ArmPlatformPkg/Bds/Bds.inf
 183
 184 [FV.FVMAIN_COMPACT]
 185 FvAlignment        = 8
 186 ERASE_POLARITY     = 1
 187 MEMORY_MAPPED      = TRUE
 188 STICKY_WRITE       = TRUE
 189 LOCK_CAP           = TRUE
 190 LOCK_STATUS        = TRUE
 191 WRITE_DISABLED_CAP = TRUE
 192 WRITE_ENABLED_CAP  = TRUE
 193 WRITE_STATUS       = TRUE
 194 WRITE_LOCK_CAP     = TRUE
 195 WRITE_LOCK_STATUS  = TRUE
 196 READ_DISABLED_CAP  = TRUE
 197 READ_ENABLED_CAP   = TRUE
 198 READ_STATUS        = TRUE
 199 READ_LOCK_CAP      = TRUE
 200 READ_LOCK_STATUS   = TRUE
 201
 202   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 203
 204   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 205     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 206       SECTION FV_IMAGE = FVMAIN
 207     }
 208   }
 209
 210
 211 ################################################################################
 212 #
 213 # Rules are use with the [FV] section's module INF type to define
 214 # how an FFS file is created for a given INF file. The following Rule are the default
 215 # rules for the different module type. User can add the customized rules to define the
 216 # content of the FFS file.
 217 #
 218 ################################################################################
 219
 220
 221 ############################################################################
 222 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 223 ############################################################################
 224 #
 225 #[Rule.Common.DXE_DRIVER]
 226 #  FILE DRIVER = $(NAMED_GUID) {
 227 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 228 #    COMPRESS PI_STD {
 229 #      GUIDED {
 230 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 231 #        UI       STRING="$(MODULE_NAME)" Optional
 232 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 233 #      }
 234 #    }
 235 #  }
 236 #
 237 ############################################################################
 238
 239 #
 240 # These SEC rules are used for ArmPlatformPkg/PrePi module.
 241 # ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the
 242 # UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint
 243 #
 244 [Rule.ARM.SEC]
 245   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 246     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 247   }
 248
 249 [Rule.AARCH64.SEC]
 250   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 251     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 252   }
 253
 254 # A shim specific rule is required to ensure the alignment is 4K.
 255 # Otherwise BaseTools pick up the AArch32 alignment (ie: 32)
 256 [Rule.ARM.SEC.SHIM]
 257   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 258     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 259   }
 260
 261 [Rule.Common.PEI_CORE]
 262   FILE PEI_CORE = $(NAMED_GUID) {
 263     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 264     UI     STRING ="$(MODULE_NAME)" Optional
 265   }
 266
 267 [Rule.Common.PEIM]
 268   FILE PEIM = $(NAMED_GUID) {
 269      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 270      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 271      UI       STRING="$(MODULE_NAME)" Optional
 272   }
 273
 274 [Rule.Common.PEIM.TIANOCOMPRESSED]
 275   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 276     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 277     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 278       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 279       UI        STRING="$(MODULE_NAME)" Optional
 280     }
 281   }
 282
 283 [Rule.Common.DXE_CORE]
 284   FILE DXE_CORE = $(NAMED_GUID) {
 285     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 286     UI       STRING="$(MODULE_NAME)" Optional
 287   }
 288
 289 [Rule.Common.UEFI_DRIVER]
 290   FILE DRIVER = $(NAMED_GUID) {
 291     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 292     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 293     UI           STRING="$(MODULE_NAME)" Optional
 294   }
 295
 296 [Rule.Common.DXE_DRIVER]
 297   FILE DRIVER = $(NAMED_GUID) {
 298     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 299     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 300     UI           STRING="$(MODULE_NAME)" Optional
 301   }
 302
 303 [Rule.Common.DXE_RUNTIME_DRIVER]
 304   FILE DRIVER = $(NAMED_GUID) {
 305     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 306     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 307     UI           STRING="$(MODULE_NAME)" Optional
 308   }
 309
 310 [Rule.Common.UEFI_APPLICATION]
 311   FILE APPLICATION = $(NAMED_GUID) {
 312     UI     STRING ="$(MODULE_NAME)" Optional
 313     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 314   }
 315
 316 [Rule.Common.UEFI_DRIVER.BINARY]
 317   FILE DRIVER = $(NAMED_GUID) {
 318     DXE_DEPEX DXE_DEPEX Optional      |.depex
 319     PE32      PE32                    |.efi
 320     UI        STRING="$(MODULE_NAME)" Optional
 321     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 322   }
 323
 324 [Rule.Common.UEFI_APPLICATION.BINARY]
 325   FILE APPLICATION = $(NAMED_GUID) {
 326     PE32      PE32                    |.efi
 327     UI        STRING="$(MODULE_NAME)" Optional
 328     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 329   }