ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf

   1 #
   2 #  Copyright (c) 2013-2015, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.BL33_AP_UEFI]
  28 BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0xF0
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x000F0000
  53 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  54 FV = FVMAIN_COMPACT
  55
  56
  57 ################################################################################
  58 #
  59 # FV Section
  60 #
  61 # [FV] section is used to define what components or modules are placed within a flash
  62 # device file.  This section also defines order the components and modules are positioned
  63 # within the image.  The [FV] section consists of define statements, set statements and
  64 # module statements.
  65 #
  66 ################################################################################
  67
  68 [FV.FvMain]
  69 BlockSize          = 0x40
  70 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  71 FvAlignment        = 8         # FV alignment and FV attributes setting.
  72 ERASE_POLARITY     = 1
  73 MEMORY_MAPPED      = TRUE
  74 STICKY_WRITE       = TRUE
  75 LOCK_CAP           = TRUE
  76 LOCK_STATUS        = TRUE
  77 WRITE_DISABLED_CAP = TRUE
  78 WRITE_ENABLED_CAP  = TRUE
  79 WRITE_STATUS       = TRUE
  80 WRITE_LOCK_CAP     = TRUE
  81 WRITE_LOCK_STATUS  = TRUE
  82 READ_DISABLED_CAP  = TRUE
  83 READ_ENABLED_CAP   = TRUE
  84 READ_STATUS        = TRUE
  85 READ_LOCK_CAP      = TRUE
  86 READ_LOCK_STATUS   = TRUE
  87 FvNameGuid         = B73FE497-B92E-416e-8326-45AD0D270092
  88
  89   APRIORI DXE {
  90     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  91   }
  92
  93   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  94   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  95
  96   #
  97   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  98   #
  99   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 100   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 101   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 102   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 103   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 104   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 105   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 106   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 107
 108   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 109   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 110
 111   #
 112   # ACPI Support
 113   #
 114   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 115   INF RuleOverride=ACPITABLE ArmPlatformPkg/ArmJunoPkg/AcpiTables/AcpiTables.inf
 116
 117   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 118
 119   #
 120   # Multiple Console IO support
 121   #
 122   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 123   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 124   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 125   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 126   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 127
 128   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 129   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 130   INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
 131
 132   # NOR Flash driver
 133   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 134
 135   # Versatile Express FileSystem
 136   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 137
 138   #
 139   # FAT filesystem + GPT/MBR partitioning
 140   #
 141   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 142   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 143   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 144   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 145
 146   # Required by PCI
 147   INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
 148
 149   # FV FileSystem
 150   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 151
 152   #
 153   # Usb Support
 154   #
 155   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 156   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 157   INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
 158   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 159   INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
 160
 161   #
 162   # PCI Support
 163   #
 164   INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 165   INF ArmPlatformPkg/ArmJunoPkg/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf
 166
 167   #
 168   # SATA Controller
 169   #
 170   INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
 171   INF EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf
 172
 173   #
 174   # Networking stack
 175   #
 176   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 177   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 178   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 179   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 180   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 181   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 182   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 183   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 184   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 185   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 186   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 187   INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf
 188
 189   #
 190   # UEFI applications
 191   #
 192   INF ShellBinPkg/UefiShell/UefiShell.inf
 193
 194   #
 195   # Juno platform driver
 196   #
 197   INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf
 198
 199   #
 200   # Bds
 201   #
 202   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 203   INF ArmPlatformPkg/Bds/Bds.inf
 204
 205   #
 206   # FDT installation
 207   #
 208   # The UEFI driver is at the end of the list of the driver to be dispatched
 209   # after the device drivers (eg: Ethernet) to ensure we have support for them.
 210   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 211
 212 [FV.FVMAIN_COMPACT]
 213 FvAlignment        = 8
 214 ERASE_POLARITY     = 1
 215 MEMORY_MAPPED      = TRUE
 216 STICKY_WRITE       = TRUE
 217 LOCK_CAP           = TRUE
 218 LOCK_STATUS        = TRUE
 219 WRITE_DISABLED_CAP = TRUE
 220 WRITE_ENABLED_CAP  = TRUE
 221 WRITE_STATUS       = TRUE
 222 WRITE_LOCK_CAP     = TRUE
 223 WRITE_LOCK_STATUS  = TRUE
 224 READ_DISABLED_CAP  = TRUE
 225 READ_ENABLED_CAP   = TRUE
 226 READ_STATUS        = TRUE
 227 READ_LOCK_CAP      = TRUE
 228 READ_LOCK_STATUS   = TRUE
 229
 230   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 231
 232   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 233     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 234       SECTION FV_IMAGE = FVMAIN
 235     }
 236   }
 237
 238
 239 ################################################################################
 240 #
 241 # Rules are use with the [FV] section's module INF type to define
 242 # how an FFS file is created for a given INF file. The following Rule are the default
 243 # rules for the different module type. User can add the customized rules to define the
 244 # content of the FFS file.
 245 #
 246 ################################################################################
 247
 248
 249 ############################################################################
 250 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 251 ############################################################################
 252 #
 253 #[Rule.Common.DXE_DRIVER]
 254 #  FILE DRIVER = $(NAMED_GUID) {
 255 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 256 #    COMPRESS PI_STD {
 257 #      GUIDED {
 258 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 259 #        UI       STRING="$(MODULE_NAME)" Optional
 260 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 261 #      }
 262 #    }
 263 #  }
 264 #
 265 ############################################################################
 266
 267 #
 268 # These SEC rules are used for ArmPlatformPkg/PrePi module.
 269 # ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the
 270 # UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint
 271 #
 272 [Rule.ARM.SEC]
 273   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 274     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 275   }
 276
 277 [Rule.AARCH64.SEC]
 278   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 279     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 280   }
 281
 282 # A shim specific rule is required to ensure the alignment is 4K.
 283 # Otherwise BaseTools pick up the AArch32 alignment (ie: 32)
 284 [Rule.ARM.SEC.SHIM]
 285   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 286     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 287   }
 288
 289 [Rule.Common.PEI_CORE]
 290   FILE PEI_CORE = $(NAMED_GUID) {
 291     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 292     UI     STRING ="$(MODULE_NAME)" Optional
 293   }
 294
 295 [Rule.Common.PEIM]
 296   FILE PEIM = $(NAMED_GUID) {
 297      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 298      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 299      UI       STRING="$(MODULE_NAME)" Optional
 300   }
 301
 302 [Rule.Common.PEIM.TIANOCOMPRESSED]
 303   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 304     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 305     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 306       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 307       UI        STRING="$(MODULE_NAME)" Optional
 308     }
 309   }
 310
 311 [Rule.Common.DXE_CORE]
 312   FILE DXE_CORE = $(NAMED_GUID) {
 313     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 314     UI       STRING="$(MODULE_NAME)" Optional
 315   }
 316
 317 [Rule.Common.UEFI_DRIVER]
 318   FILE DRIVER = $(NAMED_GUID) {
 319     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 320     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 321     UI           STRING="$(MODULE_NAME)" Optional
 322   }
 323
 324 [Rule.Common.DXE_DRIVER]
 325   FILE DRIVER = $(NAMED_GUID) {
 326     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 327     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 328     UI           STRING="$(MODULE_NAME)" Optional
 329   }
 330
 331 [Rule.Common.DXE_RUNTIME_DRIVER]
 332   FILE DRIVER = $(NAMED_GUID) {
 333     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 334     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 335     UI           STRING="$(MODULE_NAME)" Optional
 336   }
 337
 338 [Rule.Common.UEFI_APPLICATION]
 339   FILE APPLICATION = $(NAMED_GUID) {
 340     UI     STRING ="$(MODULE_NAME)" Optional
 341     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 342   }
 343
 344 [Rule.Common.UEFI_DRIVER.BINARY]
 345   FILE DRIVER = $(NAMED_GUID) {
 346     DXE_DEPEX DXE_DEPEX Optional      |.depex
 347     PE32      PE32                    |.efi
 348     UI        STRING="$(MODULE_NAME)" Optional
 349     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 350   }
 351
 352 [Rule.Common.UEFI_APPLICATION.BINARY]
 353   FILE APPLICATION = $(NAMED_GUID) {
 354     PE32      PE32                    |.efi
 355     UI        STRING="$(MODULE_NAME)" Optional
 356     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 357   }
 358
 359 [Rule.Common.USER_DEFINED.ACPITABLE]
 360   FILE FREEFORM = $(NAMED_GUID) {
 361     RAW ACPI               |.acpi
 362     RAW ASL                |.aml
 363   }