ArmPlatformPkg/ArmJunoPkg/ArmJuno.fdf

   1 #
   2 #  Copyright (c) 2013-2014, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.BL33_AP_UEFI]
  28 BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0xF0
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x000F0000
  53 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  54 FV = FVMAIN_COMPACT
  55
  56
  57 ################################################################################
  58 #
  59 # FV Section
  60 #
  61 # [FV] section is used to define what components or modules are placed within a flash
  62 # device file.  This section also defines order the components and modules are positioned
  63 # within the image.  The [FV] section consists of define statements, set statements and
  64 # module statements.
  65 #
  66 ################################################################################
  67
  68 [FV.FvMain]
  69 BlockSize          = 0x40
  70 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  71 FvAlignment        = 8         # FV alignment and FV attributes setting.
  72 ERASE_POLARITY     = 1
  73 MEMORY_MAPPED      = TRUE
  74 STICKY_WRITE       = TRUE
  75 LOCK_CAP           = TRUE
  76 LOCK_STATUS        = TRUE
  77 WRITE_DISABLED_CAP = TRUE
  78 WRITE_ENABLED_CAP  = TRUE
  79 WRITE_STATUS       = TRUE
  80 WRITE_LOCK_CAP     = TRUE
  81 WRITE_LOCK_STATUS  = TRUE
  82 READ_DISABLED_CAP  = TRUE
  83 READ_ENABLED_CAP   = TRUE
  84 READ_STATUS        = TRUE
  85 READ_LOCK_CAP      = TRUE
  86 READ_LOCK_STATUS   = TRUE
  87
  88   APRIORI DXE {
  89     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  90   }
  91
  92   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  93   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  94
  95   #
  96   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  97   #
  98   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  99   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 100   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 101   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 102   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 103   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 104   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 105   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 106
 107   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 108   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 109
 110   #
 111   # ACPI Support
 112   #
 113   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 114   INF RuleOverride=ACPITABLE ArmPlatformPkg/ArmJunoPkg/AcpiTables/AcpiTables.inf
 115
 116   #
 117   # FDT installation
 118   #
 119   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 120
 121   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 122
 123   #
 124   # Multiple Console IO support
 125   #
 126   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 127   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 128   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 129   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 130   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 131
 132   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 133   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 134   INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
 135
 136   # NOR Flash driver
 137   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 138
 139   # Versatile Express FileSystem
 140   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 141
 142   #
 143   # FAT filesystem + GPT/MBR partitioning
 144   #
 145   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 146   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 147   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 148   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 149
 150   # FV FileSystem
 151   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 152
 153   #
 154   # Usb Support
 155   #
 156   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 157   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 158   INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
 159   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 160   INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
 161
 162   #
 163   # Networking stack
 164   #
 165   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 166   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 167   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 168   INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
 169   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 170   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 171   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 172   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 173   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 174   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 175   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 176   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 177   INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf
 178
 179   #
 180   # UEFI applications
 181   #
 182   INF ShellBinPkg/UefiShell/UefiShell.inf
 183
 184   #
 185   # Juno platform driver
 186   #
 187   INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf
 188
 189   #
 190   # Bds
 191   #
 192   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 193   INF ArmPlatformPkg/Bds/Bds.inf
 194
 195 [FV.FVMAIN_COMPACT]
 196 FvAlignment        = 8
 197 ERASE_POLARITY     = 1
 198 MEMORY_MAPPED      = TRUE
 199 STICKY_WRITE       = TRUE
 200 LOCK_CAP           = TRUE
 201 LOCK_STATUS        = TRUE
 202 WRITE_DISABLED_CAP = TRUE
 203 WRITE_ENABLED_CAP  = TRUE
 204 WRITE_STATUS       = TRUE
 205 WRITE_LOCK_CAP     = TRUE
 206 WRITE_LOCK_STATUS  = TRUE
 207 READ_DISABLED_CAP  = TRUE
 208 READ_ENABLED_CAP   = TRUE
 209 READ_STATUS        = TRUE
 210 READ_LOCK_CAP      = TRUE
 211 READ_LOCK_STATUS   = TRUE
 212
 213   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 214
 215   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 216     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 217       SECTION FV_IMAGE = FVMAIN
 218     }
 219   }
 220
 221
 222 ################################################################################
 223 #
 224 # Rules are use with the [FV] section's module INF type to define
 225 # how an FFS file is created for a given INF file. The following Rule are the default
 226 # rules for the different module type. User can add the customized rules to define the
 227 # content of the FFS file.
 228 #
 229 ################################################################################
 230
 231
 232 ############################################################################
 233 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 234 ############################################################################
 235 #
 236 #[Rule.Common.DXE_DRIVER]
 237 #  FILE DRIVER = $(NAMED_GUID) {
 238 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 239 #    COMPRESS PI_STD {
 240 #      GUIDED {
 241 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 242 #        UI       STRING="$(MODULE_NAME)" Optional
 243 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 244 #      }
 245 #    }
 246 #  }
 247 #
 248 ############################################################################
 249
 250 #
 251 # These SEC rules are used for ArmPlatformPkg/PrePi module.
 252 # ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the
 253 # UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint
 254 #
 255 [Rule.ARM.SEC]
 256   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 257     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 258   }
 259
 260 [Rule.AARCH64.SEC]
 261   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 262     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 263   }
 264
 265 # A shim specific rule is required to ensure the alignment is 4K.
 266 # Otherwise BaseTools pick up the AArch32 alignment (ie: 32)
 267 [Rule.ARM.SEC.SHIM]
 268   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 269     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 270   }
 271
 272 [Rule.Common.PEI_CORE]
 273   FILE PEI_CORE = $(NAMED_GUID) {
 274     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 275     UI     STRING ="$(MODULE_NAME)" Optional
 276   }
 277
 278 [Rule.Common.PEIM]
 279   FILE PEIM = $(NAMED_GUID) {
 280      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 281      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 282      UI       STRING="$(MODULE_NAME)" Optional
 283   }
 284
 285 [Rule.Common.PEIM.TIANOCOMPRESSED]
 286   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 287     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 288     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 289       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 290       UI        STRING="$(MODULE_NAME)" Optional
 291     }
 292   }
 293
 294 [Rule.Common.DXE_CORE]
 295   FILE DXE_CORE = $(NAMED_GUID) {
 296     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 297     UI       STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.UEFI_DRIVER]
 301   FILE DRIVER = $(NAMED_GUID) {
 302     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 303     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 304     UI           STRING="$(MODULE_NAME)" Optional
 305   }
 306
 307 [Rule.Common.DXE_DRIVER]
 308   FILE DRIVER = $(NAMED_GUID) {
 309     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 310     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 311     UI           STRING="$(MODULE_NAME)" Optional
 312   }
 313
 314 [Rule.Common.DXE_RUNTIME_DRIVER]
 315   FILE DRIVER = $(NAMED_GUID) {
 316     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 317     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 318     UI           STRING="$(MODULE_NAME)" Optional
 319   }
 320
 321 [Rule.Common.UEFI_APPLICATION]
 322   FILE APPLICATION = $(NAMED_GUID) {
 323     UI     STRING ="$(MODULE_NAME)" Optional
 324     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 325   }
 326
 327 [Rule.Common.UEFI_DRIVER.BINARY]
 328   FILE DRIVER = $(NAMED_GUID) {
 329     DXE_DEPEX DXE_DEPEX Optional      |.depex
 330     PE32      PE32                    |.efi
 331     UI        STRING="$(MODULE_NAME)" Optional
 332     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 333   }
 334
 335 [Rule.Common.UEFI_APPLICATION.BINARY]
 336   FILE APPLICATION = $(NAMED_GUID) {
 337     PE32      PE32                    |.efi
 338     UI        STRING="$(MODULE_NAME)" Optional
 339     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 340   }
 341
 342 [Rule.Common.USER_DEFINED.ACPITABLE]
 343   FILE FREEFORM = $(NAMED_GUID) {
 344     RAW ACPI               |.acpi
 345     RAW ASL                |.aml
 346   }