ArmPlatformPkg/ArmPlatformPkg.fdf

   1 #
   2 #  Copyright (c) 2011-2014, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.Sec_ArmPlatform_EFI]
  28 BaseAddress   = 0xEC000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
  29 Size          = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
  30 ErasePolarity = 1
  31 BlockSize     = 0x00002000
  32 NumBlocks     = 0x10
  33
  34 ################################################################################
  35 #
  36 # Following are lists of FD Region layout which correspond to the locations of different
  37 # images within the flash device.
  38 #
  39 # Regions must be defined in ascending order and may not overlap.
  40 #
  41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  43 # "0x" characters. Like:
  44 # Offset|Size
  45 # PcdOffsetCName|PcdSizeCName
  46 # RegionType <FV, DATA, or FILE>
  47 #
  48 ################################################################################
  49
  50 0x00000000|0x00020000
  51 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  52 FV = FVMAIN_SEC
  53
  54
  55 [FD.ArmPlatform_EFI]
  56 BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  57 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  58 ErasePolarity = 1
  59
  60 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  61 BlockSize     = 0x00001000
  62 NumBlocks     = 0x200
  63
  64 ################################################################################
  65 #
  66 # Following are lists of FD Region layout which correspond to the locations of different
  67 # images within the flash device.
  68 #
  69 # Regions must be defined in ascending order and may not overlap.
  70 #
  71 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  72 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  73 # "0x" characters. Like:
  74 # Offset|Size
  75 # PcdOffsetCName|PcdSizeCName
  76 # RegionType <FV, DATA, or FILE>
  77 #
  78 ################################################################################
  79
  80 0x00000000|0x00200000
  81 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  82 FV = FVMAIN_COMPACT
  83
  84
  85 ################################################################################
  86 #
  87 # FV Section
  88 #
  89 # [FV] section is used to define what components or modules are placed within a flash
  90 # device file.  This section also defines order the components and modules are positioned
  91 # within the image.  The [FV] section consists of define statements, set statements and
  92 # module statements.
  93 #
  94 ################################################################################
  95
  96 [FV.FVMAIN_SEC]
  97 FvAlignment        = 8
  98 ERASE_POLARITY     = 1
  99 MEMORY_MAPPED      = TRUE
 100 STICKY_WRITE       = TRUE
 101 LOCK_CAP           = TRUE
 102 LOCK_STATUS        = TRUE
 103 WRITE_DISABLED_CAP = TRUE
 104 WRITE_ENABLED_CAP  = TRUE
 105 WRITE_STATUS       = TRUE
 106 WRITE_LOCK_CAP     = TRUE
 107 WRITE_LOCK_STATUS  = TRUE
 108 READ_DISABLED_CAP  = TRUE
 109 READ_ENABLED_CAP   = TRUE
 110 READ_STATUS        = TRUE
 111 READ_LOCK_CAP      = TRUE
 112 READ_LOCK_STATUS   = TRUE
 113
 114   INF ArmPlatformPkg/Sec/Sec.inf
 115
 116
 117 [FV.FvMain]
 118 BlockSize          = 0x40
 119 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 120 FvAlignment        = 8         # FV alignment and FV attributes setting.
 121 ERASE_POLARITY     = 1
 122 MEMORY_MAPPED      = TRUE
 123 STICKY_WRITE       = TRUE
 124 LOCK_CAP           = TRUE
 125 LOCK_STATUS        = TRUE
 126 WRITE_DISABLED_CAP = TRUE
 127 WRITE_ENABLED_CAP  = TRUE
 128 WRITE_STATUS       = TRUE
 129 WRITE_LOCK_CAP     = TRUE
 130 WRITE_LOCK_STATUS  = TRUE
 131 READ_DISABLED_CAP  = TRUE
 132 READ_ENABLED_CAP   = TRUE
 133 READ_STATUS        = TRUE
 134 READ_LOCK_CAP      = TRUE
 135 READ_LOCK_STATUS   = TRUE
 136 FvNameGuid         = 8fa66cd0-f773-4f26-8f9f-5e54d0804c68
 137
 138   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 139
 140   #
 141   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 142   #
 143   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 144   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 145   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 146   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 147   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 148   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 149   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 150   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 151   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 152   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 153
 154   # Simple TextIn/TextOut for UEFI Terminal
 155   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 156
 157   #
 158   # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
 159   #
 160   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 161
 162   #
 163   # FAT filesystem + GPT/MBR partitioning
 164   #
 165   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 166   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 167   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 168   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 169
 170   #
 171   # UEFI application (Shell Embedded Boot Loader)
 172   #
 173   INF EmbeddedPkg/Ebl/Ebl.inf
 174
 175   #
 176   # Bds
 177   #
 178   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 179   INF ArmPlatformPkg/Bds/Bds.inf
 180
 181
 182 [FV.FVMAIN_COMPACT]
 183 FvAlignment        = 8
 184 ERASE_POLARITY     = 1
 185 MEMORY_MAPPED      = TRUE
 186 STICKY_WRITE       = TRUE
 187 LOCK_CAP           = TRUE
 188 LOCK_STATUS        = TRUE
 189 WRITE_DISABLED_CAP = TRUE
 190 WRITE_ENABLED_CAP  = TRUE
 191 WRITE_STATUS       = TRUE
 192 WRITE_LOCK_CAP     = TRUE
 193 WRITE_LOCK_STATUS  = TRUE
 194 READ_DISABLED_CAP  = TRUE
 195 READ_ENABLED_CAP   = TRUE
 196 READ_STATUS        = TRUE
 197 READ_LOCK_CAP      = TRUE
 198 READ_LOCK_STATUS   = TRUE
 199
 200   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 201   INF MdeModulePkg/Core/Pei/PeiMain.inf
 202   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 203   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 204   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 205   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 206   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 207   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 208   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 209
 210   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 211     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 212       SECTION FV_IMAGE = FVMAIN
 213     }
 214   }
 215
 216
 217 ################################################################################
 218 #
 219 # Rules are use with the [FV] section's module INF type to define
 220 # how an FFS file is created for a given INF file. The following Rule are the default
 221 # rules for the different module type. User can add the customized rules to define the
 222 # content of the FFS file.
 223 #
 224 ################################################################################
 225
 226
 227 ############################################################################
 228 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 229 ############################################################################
 230 #
 231 #[Rule.Common.DXE_DRIVER]
 232 #  FILE DRIVER = $(NAMED_GUID) {
 233 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 234 #    COMPRESS PI_STD {
 235 #      GUIDED {
 236 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 237 #        UI       STRING="$(MODULE_NAME)" Optional
 238 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 239 #      }
 240 #    }
 241 #  }
 242 #
 243 ############################################################################
 244
 245 [Rule.ARM.SEC]
 246   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 247     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 248   }
 249
 250 # The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.
 251 # It is the reason 4K is used instead of 2K for the module alignment.
 252 [Rule.AARCH64.SEC]
 253   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 254     TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi
 255   }
 256
 257 [Rule.Common.PEI_CORE]
 258   FILE PEI_CORE = $(NAMED_GUID) {
 259     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 260     UI     STRING ="$(MODULE_NAME)" Optional
 261   }
 262
 263 [Rule.Common.PEIM]
 264   FILE PEIM = $(NAMED_GUID) {
 265      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 266      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 267      UI       STRING="$(MODULE_NAME)" Optional
 268   }
 269
 270 [Rule.Common.PEIM.TIANOCOMPRESSED]
 271   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 272     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 273     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 274       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 275       UI        STRING="$(MODULE_NAME)" Optional
 276     }
 277   }
 278
 279 [Rule.Common.DXE_CORE]
 280   FILE DXE_CORE = $(NAMED_GUID) {
 281     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 282     UI       STRING="$(MODULE_NAME)" Optional
 283   }
 284
 285 [Rule.Common.UEFI_DRIVER]
 286   FILE DRIVER = $(NAMED_GUID) {
 287     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 288     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 289     UI           STRING="$(MODULE_NAME)" Optional
 290   }
 291
 292 [Rule.Common.UEFI_DRIVER.BINARY]
 293   FILE DRIVER = $(NAMED_GUID) {
 294     DXE_DEPEX DXE_DEPEX Optional      |.depex
 295     PE32      PE32                    |.efi
 296     UI        STRING="$(MODULE_NAME)" Optional
 297     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 298   }
 299
 300 [Rule.Common.DXE_DRIVER]
 301   FILE DRIVER = $(NAMED_GUID) {
 302     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 303     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 304     UI           STRING="$(MODULE_NAME)" Optional
 305   }
 306
 307 [Rule.Common.DXE_RUNTIME_DRIVER]
 308   FILE DRIVER = $(NAMED_GUID) {
 309     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 310     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 311     UI           STRING="$(MODULE_NAME)" Optional
 312   }
 313
 314 [Rule.Common.UEFI_APPLICATION]
 315   FILE APPLICATION = $(NAMED_GUID) {
 316     UI     STRING ="$(MODULE_NAME)" Optional
 317     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 318   }