ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-MPCore.fdf

   1 # FLASH layout file for ARM RealView EB.
   2 #
   3 #  Copyright (c) 2011-2014, ARM Limited. All rights reserved.
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.ArmRealViewEb_EFI]
  30 BaseAddress   = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress
  31 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
  32 ErasePolarity = 1
  33 BlockSize     = 0x00010000
  34 NumBlocks     = 0x20
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00050000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 0x00050000|0x00150000
  57 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  58 FV = FVMAIN_COMPACT
  59
  60 ################################################################################
  61 #
  62 # FV Section
  63 #
  64 # [FV] section is used to define what components or modules are placed within a flash
  65 # device file.  This section also defines order the components and modules are positioned
  66 # within the image.  The [FV] section consists of define statements, set statements and
  67 # module statements.
  68 #
  69 ################################################################################
  70
  71 [FV.FVMAIN_SEC]
  72 FvAlignment        = 8
  73 ERASE_POLARITY     = 1
  74 MEMORY_MAPPED      = TRUE
  75 STICKY_WRITE       = TRUE
  76 LOCK_CAP           = TRUE
  77 LOCK_STATUS        = TRUE
  78 WRITE_DISABLED_CAP = TRUE
  79 WRITE_ENABLED_CAP  = TRUE
  80 WRITE_STATUS       = TRUE
  81 WRITE_LOCK_CAP     = TRUE
  82 WRITE_LOCK_STATUS  = TRUE
  83 READ_DISABLED_CAP  = TRUE
  84 READ_ENABLED_CAP   = TRUE
  85 READ_STATUS        = TRUE
  86 READ_LOCK_CAP      = TRUE
  87 READ_LOCK_STATUS   = TRUE
  88
  89   INF ArmPlatformPkg/Sec/Sec.inf
  90
  91
  92 [FV.FvMain]
  93 BlockSize          = 0x40
  94 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  95 FvAlignment        = 8         # FV alignment and FV attributes setting.
  96 ERASE_POLARITY     = 1
  97 MEMORY_MAPPED      = TRUE
  98 STICKY_WRITE       = TRUE
  99 LOCK_CAP           = TRUE
 100 LOCK_STATUS        = TRUE
 101 WRITE_DISABLED_CAP = TRUE
 102 WRITE_ENABLED_CAP  = TRUE
 103 WRITE_STATUS       = TRUE
 104 WRITE_LOCK_CAP     = TRUE
 105 WRITE_LOCK_STATUS  = TRUE
 106 READ_DISABLED_CAP  = TRUE
 107 READ_ENABLED_CAP   = TRUE
 108 READ_STATUS        = TRUE
 109 READ_LOCK_CAP      = TRUE
 110 READ_LOCK_STATUS   = TRUE
 111
 112   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 113
 114   #
 115   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 116   #
 117   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 118   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 119   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 120   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 121   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 122   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 123   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 124   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 125   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 126   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 127   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 128
 129   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 130   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 131
 132   #
 133   # Multiple Console IO support
 134   #
 135   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 136   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 137   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 138   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 139   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 140
 141   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 142   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 143
 144   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 145
 146   #
 147   # Semi-hosting filesystem
 148   #
 149   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 150
 151   #
 152   # Multimedia Card Interface
 153   #
 154   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 155   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 156
 157   # FV Filesystem
 158   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 159
 160   #
 161   # FAT filesystem + GPT/MBR partitioning
 162   #
 163   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 164   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 165   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 166   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 167
 168   #
 169   # UEFI application (Shell Embedded Boot Loader)
 170   #
 171   INF ShellBinPkg/UefiShell/UefiShell.inf
 172
 173   #
 174   # Bds
 175   #
 176   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 177   INF ArmPlatformPkg/Bds/Bds.inf
 178
 179
 180 [FV.FVMAIN_COMPACT]
 181 FvAlignment        = 8
 182 ERASE_POLARITY     = 1
 183 MEMORY_MAPPED      = TRUE
 184 STICKY_WRITE       = TRUE
 185 LOCK_CAP           = TRUE
 186 LOCK_STATUS        = TRUE
 187 WRITE_DISABLED_CAP = TRUE
 188 WRITE_ENABLED_CAP  = TRUE
 189 WRITE_STATUS       = TRUE
 190 WRITE_LOCK_CAP     = TRUE
 191 WRITE_LOCK_STATUS  = TRUE
 192 READ_DISABLED_CAP  = TRUE
 193 READ_ENABLED_CAP   = TRUE
 194 READ_STATUS        = TRUE
 195 READ_LOCK_CAP      = TRUE
 196 READ_LOCK_STATUS   = TRUE
 197
 198 !if $(EDK2_SKIP_PEICORE) == 1
 199   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 200 !else
 201   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 202   INF MdeModulePkg/Core/Pei/PeiMain.inf
 203   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 204   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 205   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 206   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 207   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 208   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 209   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 210 !endif
 211
 212   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 213     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 214       SECTION FV_IMAGE = FVMAIN
 215     }
 216   }
 217
 218 ################################################################################
 219 #
 220 # Rules are use with the [FV] section's module INF type to define
 221 # how an FFS file is created for a given INF file. The following Rule are the default
 222 # rules for the different module type. User can add the customized rules to define the
 223 # content of the FFS file.
 224 #
 225 ################################################################################
 226
 227
 228 ############################################################################
 229 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 230 ############################################################################
 231 #
 232 #[Rule.Common.DXE_DRIVER]
 233 #  FILE DRIVER = $(NAMED_GUID) {
 234 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 235 #    COMPRESS PI_STD {
 236 #      GUIDED {
 237 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 238 #        UI       STRING="$(MODULE_NAME)" Optional
 239 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 240 #      }
 241 #    }
 242 #  }
 243 #
 244 ############################################################################
 245
 246 [Rule.Common.SEC]
 247   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 248     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 249   }
 250
 251 [Rule.Common.PEI_CORE]
 252   FILE PEI_CORE = $(NAMED_GUID) {
 253     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 254     UI     STRING ="$(MODULE_NAME)" Optional
 255   }
 256
 257 [Rule.Common.PEIM]
 258   FILE PEIM = $(NAMED_GUID) {
 259      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 260      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 261      UI       STRING="$(MODULE_NAME)" Optional
 262   }
 263
 264 [Rule.Common.PEIM.TIANOCOMPRESSED]
 265   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 266     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 267     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 268       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 269       UI        STRING="$(MODULE_NAME)" Optional
 270     }
 271   }
 272
 273 [Rule.Common.DXE_CORE]
 274   FILE DXE_CORE = $(NAMED_GUID) {
 275     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 276     UI       STRING="$(MODULE_NAME)" Optional
 277   }
 278
 279 [Rule.Common.UEFI_DRIVER]
 280   FILE DRIVER = $(NAMED_GUID) {
 281     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 282     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 283     UI           STRING="$(MODULE_NAME)" Optional
 284   }
 285
 286 [Rule.Common.DXE_DRIVER]
 287   FILE DRIVER = $(NAMED_GUID) {
 288     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 289     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 290     UI           STRING="$(MODULE_NAME)" Optional
 291   }
 292
 293 [Rule.Common.DXE_RUNTIME_DRIVER]
 294   FILE DRIVER = $(NAMED_GUID) {
 295     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 296     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 297     UI           STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.UEFI_APPLICATION]
 301   FILE APPLICATION = $(NAMED_GUID) {
 302     UI     STRING ="$(MODULE_NAME)" Optional
 303     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 304   }
 305
 306 [Rule.Common.UEFI_DRIVER.BINARY]
 307   FILE DRIVER = $(NAMED_GUID) {
 308     DXE_DEPEX DXE_DEPEX Optional      |.depex
 309     PE32      PE32                    |.efi
 310     UI        STRING="$(MODULE_NAME)" Optional
 311     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 312   }
 313
 314 [Rule.Common.UEFI_APPLICATION.BINARY]
 315   FILE APPLICATION = $(NAMED_GUID) {
 316     PE32      PE32                    |.efi
 317     UI        STRING="$(MODULE_NAME)" Optional
 318     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 319   }