ArmPlatformPkg/ArmRealViewEbPkg/ArmRealViewEb-RTSM-UniCore.fdf

   1 # FLASH layout file for ARM RealView EB.
   2 #
   3 # Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
   4 # Copyright (c) 2011 - 2013, ARM Limited. All rights reserved.
   5 #
   6 #    This program and the accompanying materials
   7 #    are licensed and made available under the terms and conditions of the BSD License
   8 #    which accompanies this distribution. The full text of the license may be found at
   9 #    http://opensource.org/licenses/bsd-license.php
  10 #
  11 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 ################################################################################
  16 #
  17 # FD Section
  18 # The [FD] Section is made up of the definition statements and a
  19 # description of what goes into  the Flash Device Image.  Each FD section
  20 # defines one flash "device" image.  A flash device image may be one of
  21 # the following: Removable media bootable image (like a boot floppy
  22 # image,) an Option ROM image (that would be "flashed" into an add-in
  23 # card,) a System "Flash"  image (that would be burned into a system's
  24 # flash) or an Update ("Capsule") image that will be used to update and
  25 # existing system flash.
  26 #
  27 ################################################################################
  28
  29
  30 [FD.ArmRealViewEb_EFI]
  31 BaseAddress   = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress
  32 Size          = 0x00150000|gArmTokenSpaceGuid.PcdFdSize
  33 ErasePolarity = 1
  34 BlockSize     = 0x00010000
  35 NumBlocks     = 0x15
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 0x00000000|0x00050000
  54 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  55 FV = FVMAIN_SEC
  56
  57 0x00050000|0x00100000
  58 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  59 FV = FVMAIN_COMPACT
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvAlignment        = 8
  74 ERASE_POLARITY     = 1
  75 MEMORY_MAPPED      = TRUE
  76 STICKY_WRITE       = TRUE
  77 LOCK_CAP           = TRUE
  78 LOCK_STATUS        = TRUE
  79 WRITE_DISABLED_CAP = TRUE
  80 WRITE_ENABLED_CAP  = TRUE
  81 WRITE_STATUS       = TRUE
  82 WRITE_LOCK_CAP     = TRUE
  83 WRITE_LOCK_STATUS  = TRUE
  84 READ_DISABLED_CAP  = TRUE
  85 READ_ENABLED_CAP   = TRUE
  86 READ_STATUS        = TRUE
  87 READ_LOCK_CAP      = TRUE
  88 READ_LOCK_STATUS   = TRUE
  89
  90   INF ArmPlatformPkg/Sec/Sec.inf
  91
  92
  93 [FV.FvMain]
  94 BlockSize          = 0x40
  95 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  96 FvAlignment        = 8         # FV alignment and FV attributes setting.
  97 ERASE_POLARITY     = 1
  98 MEMORY_MAPPED      = TRUE
  99 STICKY_WRITE       = TRUE
 100 LOCK_CAP           = TRUE
 101 LOCK_STATUS        = TRUE
 102 WRITE_DISABLED_CAP = TRUE
 103 WRITE_ENABLED_CAP  = TRUE
 104 WRITE_STATUS       = TRUE
 105 WRITE_LOCK_CAP     = TRUE
 106 WRITE_LOCK_STATUS  = TRUE
 107 READ_DISABLED_CAP  = TRUE
 108 READ_ENABLED_CAP   = TRUE
 109 READ_STATUS        = TRUE
 110 READ_LOCK_CAP      = TRUE
 111 READ_LOCK_STATUS   = TRUE
 112
 113   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 114
 115   #
 116   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 117   #
 118   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 119   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 120   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 121   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 122   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 123   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 124   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 125   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 126   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 127   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 128   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 129
 130   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 131   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 132
 133   #
 134   # Multiple Console IO support
 135   #
 136   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 137   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 138   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 139   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 140   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 141
 142   INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
 143   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 144
 145   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 146
 147   #
 148   # Semi-hosting filesystem
 149   #
 150   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 151
 152   #
 153   # FAT filesystem + GPT/MBR partitioning
 154   #
 155   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 156   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 157   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 158   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 159
 160   #
 161   # UEFI application (Shell Embedded Boot Loader)
 162   #
 163   INF ShellBinPkg/UefiShell/UefiShell.inf
 164
 165   #
 166   # Bds
 167   #
 168   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 169   INF ArmPlatformPkg/Bds/Bds.inf
 170
 171
 172 [FV.FVMAIN_COMPACT]
 173 FvAlignment        = 8
 174 ERASE_POLARITY     = 1
 175 MEMORY_MAPPED      = TRUE
 176 STICKY_WRITE       = TRUE
 177 LOCK_CAP           = TRUE
 178 LOCK_STATUS        = TRUE
 179 WRITE_DISABLED_CAP = TRUE
 180 WRITE_ENABLED_CAP  = TRUE
 181 WRITE_STATUS       = TRUE
 182 WRITE_LOCK_CAP     = TRUE
 183 WRITE_LOCK_STATUS  = TRUE
 184 READ_DISABLED_CAP  = TRUE
 185 READ_ENABLED_CAP   = TRUE
 186 READ_STATUS        = TRUE
 187 READ_LOCK_CAP      = TRUE
 188 READ_LOCK_STATUS   = TRUE
 189
 190 !if $(EDK2_SKIP_PEICORE) == 1
 191   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 192 !else
 193   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 194   INF MdeModulePkg/Core/Pei/PeiMain.inf
 195   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 196   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 197   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 198   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 199   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 200   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 201   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 202 !endif
 203
 204   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 205     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 206       SECTION FV_IMAGE = FVMAIN
 207     }
 208   }
 209
 210 ################################################################################
 211 #
 212 # Rules are use with the [FV] section's module INF type to define
 213 # how an FFS file is created for a given INF file. The following Rule are the default
 214 # rules for the different module type. User can add the customized rules to define the
 215 # content of the FFS file.
 216 #
 217 ################################################################################
 218
 219
 220 ############################################################################
 221 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 222 ############################################################################
 223 #
 224 #[Rule.Common.DXE_DRIVER]
 225 #  FILE DRIVER = $(NAMED_GUID) {
 226 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 227 #    COMPRESS PI_STD {
 228 #      GUIDED {
 229 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 230 #        UI       STRING="$(MODULE_NAME)" Optional
 231 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 232 #      }
 233 #    }
 234 #  }
 235 #
 236 ############################################################################
 237
 238 [Rule.Common.SEC]
 239   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 240     TE  TE    Align = 32                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 241   }
 242
 243 [Rule.Common.PEI_CORE]
 244   FILE PEI_CORE = $(NAMED_GUID) {
 245     TE     TE                             $(INF_OUTPUT)/$(MODULE_NAME).efi
 246     UI     STRING ="$(MODULE_NAME)" Optional
 247   }
 248
 249 [Rule.Common.PEIM]
 250   FILE PEIM = $(NAMED_GUID) {
 251      PEI_DEPEX PEI_DEPEX Optional         $(INF_OUTPUT)/$(MODULE_NAME).depex
 252      TE       TE                          $(INF_OUTPUT)/$(MODULE_NAME).efi
 253      UI       STRING="$(MODULE_NAME)" Optional
 254   }
 255
 256 [Rule.Common.PEIM.TIANOCOMPRESSED]
 257   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 258     PEI_DEPEX PEI_DEPEX Optional          $(INF_OUTPUT)/$(MODULE_NAME).depex
 259     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 260       PE32      PE32                      $(INF_OUTPUT)/$(MODULE_NAME).efi
 261       UI        STRING="$(MODULE_NAME)" Optional
 262     }
 263   }
 264
 265 [Rule.Common.DXE_CORE]
 266   FILE DXE_CORE = $(NAMED_GUID) {
 267     PE32     PE32                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 268     UI       STRING="$(MODULE_NAME)" Optional
 269   }
 270
 271 [Rule.Common.UEFI_DRIVER]
 272   FILE DRIVER = $(NAMED_GUID) {
 273     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 274     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 275     UI           STRING="$(MODULE_NAME)" Optional
 276   }
 277
 278 [Rule.Common.DXE_DRIVER]
 279   FILE DRIVER = $(NAMED_GUID) {
 280     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 281     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 282     UI           STRING="$(MODULE_NAME)" Optional
 283   }
 284
 285 [Rule.Common.DXE_RUNTIME_DRIVER]
 286   FILE DRIVER = $(NAMED_GUID) {
 287     DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 288     PE32         PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 289     UI           STRING="$(MODULE_NAME)" Optional
 290   }
 291
 292 [Rule.Common.UEFI_APPLICATION]
 293   FILE APPLICATION = $(NAMED_GUID) {
 294     UI     STRING ="$(MODULE_NAME)" Optional
 295     PE32   PE32                          $(INF_OUTPUT)/$(MODULE_NAME).efi
 296   }
 297
 298 [Rule.Common.UEFI_DRIVER.BINARY]
 299   FILE DRIVER = $(NAMED_GUID) {
 300     DXE_DEPEX DXE_DEPEX Optional      |.depex
 301     PE32      PE32                    |.efi
 302     UI        STRING="$(MODULE_NAME)" Optional
 303     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 304   }
 305
 306 [Rule.Common.UEFI_APPLICATION.BINARY]
 307   FILE APPLICATION = $(NAMED_GUID) {
 308     PE32      PE32                    |.efi
 309     UI        STRING="$(MODULE_NAME)" Optional
 310     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 311   }