ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.fdf

   1 #
   2 #  Copyright (c) 2011-2014, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.Sec_ArmVExpress_EFI]
  28 BaseAddress   = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
  29 Size          = 0x00080000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
  30 ErasePolarity = 1
  31 BlockSize     = 0x00001000
  32 NumBlocks     = 0x80
  33
  34 ################################################################################
  35 #
  36 # Following are lists of FD Region layout which correspond to the locations of different
  37 # images within the flash device.
  38 #
  39 # Regions must be defined in ascending order and may not overlap.
  40 #
  41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  43 # "0x" characters. Like:
  44 # Offset|Size
  45 # PcdOffsetCName|PcdSizeCName
  46 # RegionType <FV, DATA, or FILE>
  47 #
  48 ################################################################################
  49
  50 0x00000000|0x00080000
  51 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  52 FV = FVMAIN_SEC
  53
  54
  55 [FD.ArmVExpress_EFI]
  56 !if $(EDK2_ARMVE_STANDALONE) == 1
  57 BaseAddress   = 0x45000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  58 !else
  59 BaseAddress   = 0x80000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in remapped DRAM.
  60 !endif
  61 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  62 ErasePolarity = 1
  63
  64 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  65 BlockSize     = 0x00001000
  66 NumBlocks     = 0x200
  67
  68 ################################################################################
  69 #
  70 # Following are lists of FD Region layout which correspond to the locations of different
  71 # images within the flash device.
  72 #
  73 # Regions must be defined in ascending order and may not overlap.
  74 #
  75 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  76 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  77 # "0x" characters. Like:
  78 # Offset|Size
  79 # PcdOffsetCName|PcdSizeCName
  80 # RegionType <FV, DATA, or FILE>
  81 #
  82 ################################################################################
  83
  84 0x00000000|0x00200000
  85 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  86 FV = FVMAIN_COMPACT
  87
  88
  89 ################################################################################
  90 #
  91 # FV Section
  92 #
  93 # [FV] section is used to define what components or modules are placed within a flash
  94 # device file.  This section also defines order the components and modules are positioned
  95 # within the image.  The [FV] section consists of define statements, set statements and
  96 # module statements.
  97 #
  98 ################################################################################
  99
 100 [FV.FVMAIN_SEC]
 101 FvAlignment        = 8
 102 ERASE_POLARITY     = 1
 103 MEMORY_MAPPED      = TRUE
 104 STICKY_WRITE       = TRUE
 105 LOCK_CAP           = TRUE
 106 LOCK_STATUS        = TRUE
 107 WRITE_DISABLED_CAP = TRUE
 108 WRITE_ENABLED_CAP  = TRUE
 109 WRITE_STATUS       = TRUE
 110 WRITE_LOCK_CAP     = TRUE
 111 WRITE_LOCK_STATUS  = TRUE
 112 READ_DISABLED_CAP  = TRUE
 113 READ_ENABLED_CAP   = TRUE
 114 READ_STATUS        = TRUE
 115 READ_LOCK_CAP      = TRUE
 116 READ_LOCK_STATUS   = TRUE
 117
 118   INF ArmPlatformPkg/Sec/Sec.inf
 119
 120
 121 [FV.FvMain]
 122 BlockSize          = 0x40
 123 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 124 FvAlignment        = 8         # FV alignment and FV attributes setting.
 125 ERASE_POLARITY     = 1
 126 MEMORY_MAPPED      = TRUE
 127 STICKY_WRITE       = TRUE
 128 LOCK_CAP           = TRUE
 129 LOCK_STATUS        = TRUE
 130 WRITE_DISABLED_CAP = TRUE
 131 WRITE_ENABLED_CAP  = TRUE
 132 WRITE_STATUS       = TRUE
 133 WRITE_LOCK_CAP     = TRUE
 134 WRITE_LOCK_STATUS  = TRUE
 135 READ_DISABLED_CAP  = TRUE
 136 READ_ENABLED_CAP   = TRUE
 137 READ_STATUS        = TRUE
 138 READ_LOCK_CAP      = TRUE
 139 READ_LOCK_STATUS   = TRUE
 140
 141   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 142
 143   #
 144   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 145   #
 146   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 147   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 148   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 149   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 150   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 151   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 152   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 153   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 154   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 155   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 156
 157   #
 158   # Multiple Console IO support
 159   #
 160   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 161   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 162   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 163   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 164   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 165
 166   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 167
 168   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 169   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 170   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 171   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 172   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 173
 174   #
 175   # Platform
 176   #
 177   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmHwDxe.inf
 178
 179 !if $(EDK2_ARMVE_STANDALONE) != 1
 180   #
 181   # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
 182   #
 183   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 184 !endif
 185
 186   #
 187   # FAT filesystem + GPT/MBR partitioning
 188   #
 189   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 190   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 191   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 192   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 193
 194   # Versatile Express FileSystem
 195   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 196
 197   #
 198   # Multimedia Card Interface
 199   #
 200   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 201   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 202
 203   #
 204   # UEFI application (Shell Embedded Boot Loader)
 205   #
 206   INF ShellBinPkg/UefiShell/UefiShell.inf
 207
 208   #
 209   # Bds
 210   #
 211   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 212   INF ArmPlatformPkg/Bds/Bds.inf
 213
 214
 215 [FV.FVMAIN_COMPACT]
 216 FvAlignment        = 8
 217 ERASE_POLARITY     = 1
 218 MEMORY_MAPPED      = TRUE
 219 STICKY_WRITE       = TRUE
 220 LOCK_CAP           = TRUE
 221 LOCK_STATUS        = TRUE
 222 WRITE_DISABLED_CAP = TRUE
 223 WRITE_ENABLED_CAP  = TRUE
 224 WRITE_STATUS       = TRUE
 225 WRITE_LOCK_CAP     = TRUE
 226 WRITE_LOCK_STATUS  = TRUE
 227 READ_DISABLED_CAP  = TRUE
 228 READ_ENABLED_CAP   = TRUE
 229 READ_STATUS        = TRUE
 230 READ_LOCK_CAP      = TRUE
 231 READ_LOCK_STATUS   = TRUE
 232
 233 !if $(EDK2_SKIP_PEICORE) == 1
 234   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 235 !else
 236   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 237   INF MdeModulePkg/Core/Pei/PeiMain.inf
 238   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 239   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 240   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 241   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 242   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 243   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 244   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 245 !endif
 246
 247   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 248     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 249       SECTION FV_IMAGE = FVMAIN
 250     }
 251   }
 252
 253
 254 ################################################################################
 255 #
 256 # Rules are use with the [FV] section's module INF type to define
 257 # how an FFS file is created for a given INF file. The following Rule are the default
 258 # rules for the different module type. User can add the customized rules to define the
 259 # content of the FFS file.
 260 #
 261 ################################################################################
 262
 263
 264 ############################################################################
 265 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 266 ############################################################################
 267 #
 268 #[Rule.Common.DXE_DRIVER]
 269 #  FILE DRIVER = $(NAMED_GUID) {
 270 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 271 #    COMPRESS PI_STD {
 272 #      GUIDED {
 273 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 274 #        UI       STRING="$(MODULE_NAME)" Optional
 275 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 276 #      }
 277 #    }
 278 #  }
 279 #
 280 ############################################################################
 281
 282 [Rule.Common.SEC]
 283   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 284     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 285   }
 286
 287 [Rule.Common.PEI_CORE]
 288   FILE PEI_CORE = $(NAMED_GUID) {
 289     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 290     UI     STRING ="$(MODULE_NAME)" Optional
 291   }
 292
 293 [Rule.Common.PEIM]
 294   FILE PEIM = $(NAMED_GUID) {
 295      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 296      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 297      UI       STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.PEIM.TIANOCOMPRESSED]
 301   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 302     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 303     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 304       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 305       UI        STRING="$(MODULE_NAME)" Optional
 306     }
 307   }
 308
 309 [Rule.Common.DXE_CORE]
 310   FILE DXE_CORE = $(NAMED_GUID) {
 311     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 312     UI       STRING="$(MODULE_NAME)" Optional
 313   }
 314
 315 [Rule.Common.UEFI_DRIVER]
 316   FILE DRIVER = $(NAMED_GUID) {
 317     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 318     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 319     UI           STRING="$(MODULE_NAME)" Optional
 320   }
 321
 322 [Rule.Common.DXE_DRIVER]
 323   FILE DRIVER = $(NAMED_GUID) {
 324     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 325     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 326     UI           STRING="$(MODULE_NAME)" Optional
 327   }
 328
 329 [Rule.Common.DXE_RUNTIME_DRIVER]
 330   FILE DRIVER = $(NAMED_GUID) {
 331     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 332     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 333     UI           STRING="$(MODULE_NAME)" Optional
 334   }
 335
 336 [Rule.Common.UEFI_APPLICATION]
 337   FILE APPLICATION = $(NAMED_GUID) {
 338     UI     STRING ="$(MODULE_NAME)" Optional
 339     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 340   }
 341
 342 [Rule.Common.UEFI_DRIVER.BINARY]
 343   FILE DRIVER = $(NAMED_GUID) {
 344     DXE_DEPEX DXE_DEPEX Optional      |.depex
 345     PE32      PE32                    |.efi
 346     UI        STRING="$(MODULE_NAME)" Optional
 347     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 348   }
 349
 350 [Rule.Common.UEFI_APPLICATION.BINARY]
 351   FILE APPLICATION = $(NAMED_GUID) {
 352     PE32      PE32                    |.efi
 353     UI        STRING="$(MODULE_NAME)" Optional
 354     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 355   }