ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-CTA9x4.fdf

   1 #
   2 #  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.Sec_ArmVExpress_EFI]
  28 BaseAddress   = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.
  29 Size          = 0x00080000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device
  30 ErasePolarity = 1
  31 BlockSize     = 0x00001000
  32 NumBlocks     = 0x80
  33
  34 ################################################################################
  35 #
  36 # Following are lists of FD Region layout which correspond to the locations of different
  37 # images within the flash device.
  38 #
  39 # Regions must be defined in ascending order and may not overlap.
  40 #
  41 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  42 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  43 # "0x" characters. Like:
  44 # Offset|Size
  45 # PcdOffsetCName|PcdSizeCName
  46 # RegionType <FV, DATA, or FILE>
  47 #
  48 ################################################################################
  49
  50 0x00000000|0x00080000
  51 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  52 FV = FVMAIN_SEC
  53
  54
  55 [FD.ArmVExpress_EFI]
  56 !if $(EDK2_ARMVE_STANDALONE) == 1
  57 BaseAddress   = 0x45000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  58 !else
  59 BaseAddress   = 0x80000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in remapped DRAM.
  60 !endif
  61 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  62 ErasePolarity = 1
  63
  64 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  65 BlockSize     = 0x00001000
  66 NumBlocks     = 0x200
  67
  68 ################################################################################
  69 #
  70 # Following are lists of FD Region layout which correspond to the locations of different
  71 # images within the flash device.
  72 #
  73 # Regions must be defined in ascending order and may not overlap.
  74 #
  75 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  76 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  77 # "0x" characters. Like:
  78 # Offset|Size
  79 # PcdOffsetCName|PcdSizeCName
  80 # RegionType <FV, DATA, or FILE>
  81 #
  82 ################################################################################
  83
  84 0x00000000|0x00200000
  85 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  86 FV = FVMAIN_COMPACT
  87
  88
  89 ################################################################################
  90 #
  91 # FV Section
  92 #
  93 # [FV] section is used to define what components or modules are placed within a flash
  94 # device file.  This section also defines order the components and modules are positioned
  95 # within the image.  The [FV] section consists of define statements, set statements and
  96 # module statements.
  97 #
  98 ################################################################################
  99
 100 [FV.FVMAIN_SEC]
 101 FvAlignment        = 8
 102 ERASE_POLARITY     = 1
 103 MEMORY_MAPPED      = TRUE
 104 STICKY_WRITE       = TRUE
 105 LOCK_CAP           = TRUE
 106 LOCK_STATUS        = TRUE
 107 WRITE_DISABLED_CAP = TRUE
 108 WRITE_ENABLED_CAP  = TRUE
 109 WRITE_STATUS       = TRUE
 110 WRITE_LOCK_CAP     = TRUE
 111 WRITE_LOCK_STATUS  = TRUE
 112 READ_DISABLED_CAP  = TRUE
 113 READ_ENABLED_CAP   = TRUE
 114 READ_STATUS        = TRUE
 115 READ_LOCK_CAP      = TRUE
 116 READ_LOCK_STATUS   = TRUE
 117
 118   INF ArmPlatformPkg/Sec/Sec.inf
 119
 120
 121 [FV.FvMain]
 122 BlockSize          = 0x40
 123 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 124 FvAlignment        = 8         # FV alignment and FV attributes setting.
 125 ERASE_POLARITY     = 1
 126 MEMORY_MAPPED      = TRUE
 127 STICKY_WRITE       = TRUE
 128 LOCK_CAP           = TRUE
 129 LOCK_STATUS        = TRUE
 130 WRITE_DISABLED_CAP = TRUE
 131 WRITE_ENABLED_CAP  = TRUE
 132 WRITE_STATUS       = TRUE
 133 WRITE_LOCK_CAP     = TRUE
 134 WRITE_LOCK_STATUS  = TRUE
 135 READ_DISABLED_CAP  = TRUE
 136 READ_ENABLED_CAP   = TRUE
 137 READ_STATUS        = TRUE
 138 READ_LOCK_CAP      = TRUE
 139 READ_LOCK_STATUS   = TRUE
 140 FvNameGuid         = 1a9b3625-5286-4fa6-af5f-8eabc481f3cc
 141
 142   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 143
 144   #
 145   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 146   #
 147   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 148   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 149   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 150   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 151   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 152   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 153   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 154   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 155   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 156   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 157
 158   #
 159   # Multiple Console IO support
 160   #
 161   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 162   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 163   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 164   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 165   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 166
 167   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 168
 169   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 170   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 171   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 172   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 173   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 174
 175   #
 176   # Platform
 177   #
 178   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmHwDxe.inf
 179
 180 !if $(EDK2_ARMVE_STANDALONE) != 1
 181   #
 182   # Semi-hosting filesystem (Required the Hardware Debugger to be connected)
 183   #
 184   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 185 !endif
 186
 187   #
 188   # FAT filesystem + GPT/MBR partitioning
 189   #
 190   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 191   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 192   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 193   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 194
 195   # Versatile Express FileSystem
 196   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 197
 198   #
 199   # Multimedia Card Interface
 200   #
 201   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 202   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 203
 204   #
 205   # USB support
 206   #
 207   INF EmbeddedPkg/Drivers/Isp1761UsbDxe/Isp1761UsbDxe.inf
 208
 209   #
 210   # Android Fastboot
 211   #
 212   INF EmbeddedPkg/Application/AndroidFastboot/AndroidFastbootApp.inf
 213   INF EmbeddedPkg/Drivers/AndroidFastbootTransportUsbDxe/FastbootTransportUsbDxe.inf
 214   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressFastBootDxe/ArmVExpressFastBootDxe.inf
 215
 216   #
 217   # Networking stack
 218   #
 219   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 220   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 221   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 222   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 223   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 224   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 225   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 226   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 227   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 228   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 229   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 230   INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf
 231
 232   #
 233   # UEFI application (Shell Embedded Boot Loader)
 234   #
 235   INF ShellBinPkg/UefiShell/UefiShell.inf
 236
 237   #
 238   # Bds
 239   #
 240   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 241   INF ArmPlatformPkg/Bds/Bds.inf
 242
 243   # Legacy Linux Loader
 244   INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
 245
 246   # FV Filesystem
 247   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 248
 249   #
 250   # FDT installation
 251   #
 252   # The UEFI driver is at the end of the list of the driver to be dispatched
 253   # after the device drivers (eg: Ethernet) to ensure we have support for them.
 254   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 255
 256   # Example to add a Device Tree to the Firmware Volume
 257   #FILE FREEFORM = PCD(gArmVExpressTokenSpaceGuid.PcdFdtVExpressHwA9x4) {
 258   #  SECTION RAW = ArmPlatformPkg/ArmVExpressPkg/Fdts/vexpress-v2p-ca9.dtb
 259   #}
 260
 261 [FV.FVMAIN_COMPACT]
 262 FvAlignment        = 8
 263 ERASE_POLARITY     = 1
 264 MEMORY_MAPPED      = TRUE
 265 STICKY_WRITE       = TRUE
 266 LOCK_CAP           = TRUE
 267 LOCK_STATUS        = TRUE
 268 WRITE_DISABLED_CAP = TRUE
 269 WRITE_ENABLED_CAP  = TRUE
 270 WRITE_STATUS       = TRUE
 271 WRITE_LOCK_CAP     = TRUE
 272 WRITE_LOCK_STATUS  = TRUE
 273 READ_DISABLED_CAP  = TRUE
 274 READ_ENABLED_CAP   = TRUE
 275 READ_STATUS        = TRUE
 276 READ_LOCK_CAP      = TRUE
 277 READ_LOCK_STATUS   = TRUE
 278
 279 !if $(EDK2_SKIP_PEICORE) == 1
 280   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 281 !else
 282   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 283   INF MdeModulePkg/Core/Pei/PeiMain.inf
 284   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 285   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 286   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 287   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 288   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 289   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 290   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 291 !endif
 292
 293   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 294     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 295       SECTION FV_IMAGE = FVMAIN
 296     }
 297   }
 298
 299
 300 ################################################################################
 301 #
 302 # Rules are use with the [FV] section's module INF type to define
 303 # how an FFS file is created for a given INF file. The following Rule are the default
 304 # rules for the different module type. User can add the customized rules to define the
 305 # content of the FFS file.
 306 #
 307 ################################################################################
 308
 309
 310 ############################################################################
 311 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 312 ############################################################################
 313 #
 314 #[Rule.Common.DXE_DRIVER]
 315 #  FILE DRIVER = $(NAMED_GUID) {
 316 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 317 #    COMPRESS PI_STD {
 318 #      GUIDED {
 319 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 320 #        UI       STRING="$(MODULE_NAME)" Optional
 321 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 322 #      }
 323 #    }
 324 #  }
 325 #
 326 ############################################################################
 327
 328 [Rule.Common.SEC]
 329   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 330     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 331   }
 332
 333 [Rule.Common.PEI_CORE]
 334   FILE PEI_CORE = $(NAMED_GUID) {
 335     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 336     UI     STRING ="$(MODULE_NAME)" Optional
 337   }
 338
 339 [Rule.Common.PEIM]
 340   FILE PEIM = $(NAMED_GUID) {
 341      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 342      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 343      UI       STRING="$(MODULE_NAME)" Optional
 344   }
 345
 346 [Rule.Common.PEIM.TIANOCOMPRESSED]
 347   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 348     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 349     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 350       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 351       UI        STRING="$(MODULE_NAME)" Optional
 352     }
 353   }
 354
 355 [Rule.Common.DXE_CORE]
 356   FILE DXE_CORE = $(NAMED_GUID) {
 357     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 358     UI       STRING="$(MODULE_NAME)" Optional
 359   }
 360
 361 [Rule.Common.UEFI_DRIVER]
 362   FILE DRIVER = $(NAMED_GUID) {
 363     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 364     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 365     UI           STRING="$(MODULE_NAME)" Optional
 366   }
 367
 368 [Rule.Common.DXE_DRIVER]
 369   FILE DRIVER = $(NAMED_GUID) {
 370     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 371     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 372     UI           STRING="$(MODULE_NAME)" Optional
 373   }
 374
 375 [Rule.Common.DXE_RUNTIME_DRIVER]
 376   FILE DRIVER = $(NAMED_GUID) {
 377     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 378     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 379     UI           STRING="$(MODULE_NAME)" Optional
 380   }
 381
 382 [Rule.Common.UEFI_APPLICATION]
 383   FILE APPLICATION = $(NAMED_GUID) {
 384     UI     STRING ="$(MODULE_NAME)" Optional
 385     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 386   }
 387
 388 [Rule.Common.UEFI_DRIVER.BINARY]
 389   FILE DRIVER = $(NAMED_GUID) {
 390     DXE_DEPEX DXE_DEPEX Optional      |.depex
 391     PE32      PE32                    |.efi
 392     UI        STRING="$(MODULE_NAME)" Optional
 393     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 394   }
 395
 396 [Rule.Common.UEFI_APPLICATION.BINARY]
 397   FILE APPLICATION = $(NAMED_GUID) {
 398     PE32      PE32                    |.efi
 399     UI        STRING="$(MODULE_NAME)" Optional
 400     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 401   }