ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf

   1 #
   2 #  Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.FVP_AARCH64_EFI_SEC]
  28 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in SecureROM.
  29 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x4000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 [FD.FVP_AARCH64_EFI]
  57 !ifdef ARM_FVP_RUN_NORFLASH
  58 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in Flash0.
  59 !else
  60 BaseAddress   = 0x88000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # UEFI in DRAM + 128MB.
  61 !endif
  62 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  63 ErasePolarity = 1
  64
  65 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  66 BlockSize     = 0x00001000
  67 NumBlocks     = 0x4000
  68
  69 0x00000000|0x00280000
  70 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  71 FV = FVMAIN_COMPACT
  72
  73 ################################################################################
  74 #
  75 # FV Section
  76 #
  77 # [FV] section is used to define what components or modules are placed within a flash
  78 # device file.  This section also defines order the components and modules are positioned
  79 # within the image.  The [FV] section consists of define statements, set statements and
  80 # module statements.
  81 #
  82 ################################################################################
  83
  84 [FV.FVMAIN_SEC]
  85 FvBaseAddress      = 0x0  # Secure ROM
  86 FvForceRebase      = TRUE
  87 FvAlignment        = 16
  88 ERASE_POLARITY     = 1
  89 MEMORY_MAPPED      = TRUE
  90 STICKY_WRITE       = TRUE
  91 LOCK_CAP           = TRUE
  92 LOCK_STATUS        = TRUE
  93 WRITE_DISABLED_CAP = TRUE
  94 WRITE_ENABLED_CAP  = TRUE
  95 WRITE_STATUS       = TRUE
  96 WRITE_LOCK_CAP     = TRUE
  97 WRITE_LOCK_STATUS  = TRUE
  98 READ_DISABLED_CAP  = TRUE
  99 READ_ENABLED_CAP   = TRUE
 100 READ_STATUS        = TRUE
 101 READ_LOCK_CAP      = TRUE
 102 READ_LOCK_STATUS   = TRUE
 103
 104   INF ArmPlatformPkg/Sec/Sec.inf
 105
 106
 107 [FV.FvMain]
 108 BlockSize          = 0x40
 109 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 110 FvAlignment        = 16        # FV alignment and FV attributes setting.
 111 ERASE_POLARITY     = 1
 112 MEMORY_MAPPED      = TRUE
 113 STICKY_WRITE       = TRUE
 114 LOCK_CAP           = TRUE
 115 LOCK_STATUS        = TRUE
 116 WRITE_DISABLED_CAP = TRUE
 117 WRITE_ENABLED_CAP  = TRUE
 118 WRITE_STATUS       = TRUE
 119 WRITE_LOCK_CAP     = TRUE
 120 WRITE_LOCK_STATUS  = TRUE
 121 READ_DISABLED_CAP  = TRUE
 122 READ_ENABLED_CAP   = TRUE
 123 READ_STATUS        = TRUE
 124 READ_LOCK_CAP      = TRUE
 125 READ_LOCK_STATUS   = TRUE
 126
 127   APRIORI DXE {
 128     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 129   }
 130
 131   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 132   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 133
 134   #
 135   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 136   #
 137   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 138   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 139   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 140   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 141   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 142   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 143   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 144   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 145   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 146   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 147
 148   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 149
 150   #
 151   # Multiple Console IO support
 152   #
 153   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 154   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 155   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 156   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 157   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 158
 159   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 160   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 161   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 162 !ifndef ARM_FOUNDATION_FVP
 163   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 164 !endif
 165   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 166
 167   #
 168   # Semi-hosting filesystem
 169   #
 170   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 171
 172   #
 173   # FAT filesystem + GPT/MBR partitioning
 174   #
 175   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 176   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 177   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 178   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 179
 180 !ifndef ARM_FOUNDATION_FVP
 181   #
 182   # Multimedia Card Interface
 183   #
 184   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 185   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 186 !endif
 187
 188   #
 189   # Platform Driver
 190   #
 191   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
 192   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 193
 194   #
 195   # FDT installation
 196   #
 197   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 198
 199   #
 200   # UEFI application (Shell Embedded Boot Loader)
 201   #
 202   INF ShellBinPkg/UefiShell/UefiShell.inf
 203
 204   #
 205   # Bds
 206   #
 207   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 208   INF ArmPlatformPkg/Bds/Bds.inf
 209
 210   # FV Filesystem
 211   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 212
 213 [FV.FVMAIN_COMPACT]
 214 FvAlignment        = 16
 215 ERASE_POLARITY     = 1
 216 MEMORY_MAPPED      = TRUE
 217 STICKY_WRITE       = TRUE
 218 LOCK_CAP           = TRUE
 219 LOCK_STATUS        = TRUE
 220 WRITE_DISABLED_CAP = TRUE
 221 WRITE_ENABLED_CAP  = TRUE
 222 WRITE_STATUS       = TRUE
 223 WRITE_LOCK_CAP     = TRUE
 224 WRITE_LOCK_STATUS  = TRUE
 225 READ_DISABLED_CAP  = TRUE
 226 READ_ENABLED_CAP   = TRUE
 227 READ_STATUS        = TRUE
 228 READ_LOCK_CAP      = TRUE
 229 READ_LOCK_STATUS   = TRUE
 230
 231 !if $(EDK2_SKIP_PEICORE) == 1
 232   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 233 !else
 234   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 235   INF MdeModulePkg/Core/Pei/PeiMain.inf
 236   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 237   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 238   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 239   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 240   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 241   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 242   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 243 !endif
 244
 245   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 246     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 247       SECTION FV_IMAGE = FVMAIN
 248     }
 249   }
 250
 251
 252 ################################################################################
 253 #
 254 # Rules are use with the [FV] section's module INF type to define
 255 # how an FFS file is created for a given INF file. The following Rule are the default
 256 # rules for the different module type. User can add the customized rules to define the
 257 # content of the FFS file.
 258 #
 259 ################################################################################
 260
 261
 262 ############################################################################
 263 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 264 ############################################################################
 265 #
 266 #[Rule.Common.DXE_DRIVER]
 267 #  FILE DRIVER = $(NAMED_GUID) {
 268 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 269 #    COMPRESS PI_STD {
 270 #      GUIDED {
 271 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 272 #        UI       STRING="$(MODULE_NAME)" Optional
 273 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 274 #      }
 275 #    }
 276 #  }
 277 #
 278 ############################################################################
 279
 280 [Rule.Common.SEC]
 281   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 282     TE  TE Align = 4K                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 283   }
 284
 285 [Rule.Common.PEI_CORE]
 286   FILE PEI_CORE = $(NAMED_GUID) {
 287     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 288     UI     STRING ="$(MODULE_NAME)" Optional
 289   }
 290
 291 [Rule.Common.PEIM]
 292   FILE PEIM = $(NAMED_GUID) {
 293      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 294      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 295      UI       STRING="$(MODULE_NAME)" Optional
 296   }
 297
 298 [Rule.Common.PEIM.TIANOCOMPRESSED]
 299   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 300     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 301     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 302       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 303       UI        STRING="$(MODULE_NAME)" Optional
 304     }
 305   }
 306
 307 [Rule.Common.DXE_CORE]
 308   FILE DXE_CORE = $(NAMED_GUID) {
 309     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 310     UI       STRING="$(MODULE_NAME)" Optional
 311   }
 312
 313 [Rule.Common.UEFI_DRIVER]
 314   FILE DRIVER = $(NAMED_GUID) {
 315     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 316     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 317     UI           STRING="$(MODULE_NAME)" Optional
 318   }
 319
 320 [Rule.Common.DXE_DRIVER]
 321   FILE DRIVER = $(NAMED_GUID) {
 322     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 323     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 324     UI           STRING="$(MODULE_NAME)" Optional
 325   }
 326
 327 [Rule.Common.DXE_RUNTIME_DRIVER]
 328   FILE DRIVER = $(NAMED_GUID) {
 329     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 330     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 331     UI           STRING="$(MODULE_NAME)" Optional
 332   }
 333
 334 [Rule.Common.UEFI_APPLICATION]
 335   FILE APPLICATION = $(NAMED_GUID) {
 336     UI     STRING ="$(MODULE_NAME)"     Optional
 337     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 338   }
 339
 340 [Rule.Common.UEFI_DRIVER.BINARY]
 341   FILE DRIVER = $(NAMED_GUID) {
 342     DXE_DEPEX DXE_DEPEX Optional      |.depex
 343     PE32      PE32                    |.efi
 344     UI        STRING="$(MODULE_NAME)" Optional
 345     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 346   }
 347
 348 [Rule.Common.UEFI_APPLICATION.BINARY]
 349   FILE APPLICATION = $(NAMED_GUID) {
 350     PE32      PE32                    |.efi
 351     UI        STRING="$(MODULE_NAME)" Optional
 352     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 353   }