ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf

   1 #
   2 #  Copyright (c) 2011 - 2014, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.FVP_AARCH64_EFI_SEC]
  28 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in SecureROM.
  29 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x4000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 [FD.FVP_AARCH64_EFI]
  57 !ifdef ARM_FVP_RUN_NORFLASH
  58 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in Flash0.
  59 !else
  60 BaseAddress   = 0x88000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # UEFI in DRAM + 128MB.
  61 !endif
  62 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  63 ErasePolarity = 1
  64
  65 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  66 BlockSize     = 0x00001000
  67 NumBlocks     = 0x4000
  68
  69 0x00000000|0x00280000
  70 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  71 FV = FVMAIN_COMPACT
  72
  73 ################################################################################
  74 #
  75 # FV Section
  76 #
  77 # [FV] section is used to define what components or modules are placed within a flash
  78 # device file.  This section also defines order the components and modules are positioned
  79 # within the image.  The [FV] section consists of define statements, set statements and
  80 # module statements.
  81 #
  82 ################################################################################
  83
  84 [FV.FVMAIN_SEC]
  85 FvBaseAddress      = 0x0  # Secure ROM
  86 FvForceRebase      = TRUE
  87 FvAlignment        = 16
  88 ERASE_POLARITY     = 1
  89 MEMORY_MAPPED      = TRUE
  90 STICKY_WRITE       = TRUE
  91 LOCK_CAP           = TRUE
  92 LOCK_STATUS        = TRUE
  93 WRITE_DISABLED_CAP = TRUE
  94 WRITE_ENABLED_CAP  = TRUE
  95 WRITE_STATUS       = TRUE
  96 WRITE_LOCK_CAP     = TRUE
  97 WRITE_LOCK_STATUS  = TRUE
  98 READ_DISABLED_CAP  = TRUE
  99 READ_ENABLED_CAP   = TRUE
 100 READ_STATUS        = TRUE
 101 READ_LOCK_CAP      = TRUE
 102 READ_LOCK_STATUS   = TRUE
 103
 104   INF ArmPlatformPkg/Sec/Sec.inf
 105
 106
 107 [FV.FvMain]
 108 BlockSize          = 0x40
 109 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 110 FvAlignment        = 16        # FV alignment and FV attributes setting.
 111 ERASE_POLARITY     = 1
 112 MEMORY_MAPPED      = TRUE
 113 STICKY_WRITE       = TRUE
 114 LOCK_CAP           = TRUE
 115 LOCK_STATUS        = TRUE
 116 WRITE_DISABLED_CAP = TRUE
 117 WRITE_ENABLED_CAP  = TRUE
 118 WRITE_STATUS       = TRUE
 119 WRITE_LOCK_CAP     = TRUE
 120 WRITE_LOCK_STATUS  = TRUE
 121 READ_DISABLED_CAP  = TRUE
 122 READ_ENABLED_CAP   = TRUE
 123 READ_STATUS        = TRUE
 124 READ_LOCK_CAP      = TRUE
 125 READ_LOCK_STATUS   = TRUE
 126
 127   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 128
 129   #
 130   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 131   #
 132   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 133   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 134   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 135   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 136   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 137   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 138   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 139   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 140   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 141   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 142
 143   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 144
 145   #
 146   # Multiple Console IO support
 147   #
 148   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 149   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 150   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 151   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 152   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 153
 154   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 155   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 156   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 157 !ifndef ARM_FOUNDATION_FVP
 158   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 159 !endif
 160   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 161
 162   #
 163   # Semi-hosting filesystem
 164   #
 165   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 166
 167   #
 168   # FAT filesystem + GPT/MBR partitioning
 169   #
 170   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 171   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 172   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 173   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 174
 175 !ifndef ARM_FOUNDATION_FVP
 176   #
 177   # Multimedia Card Interface
 178   #
 179   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 180   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 181 !endif
 182
 183   #
 184   # Platform Driver
 185   #
 186   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
 187   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 188
 189   #
 190   # UEFI application (Shell Embedded Boot Loader)
 191   #
 192   INF ShellBinPkg/UefiShell/UefiShell.inf
 193
 194   #
 195   # Bds
 196   #
 197   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 198   INF ArmPlatformPkg/Bds/Bds.inf
 199
 200   # FV Filesystem
 201   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 202
 203 [FV.FVMAIN_COMPACT]
 204 FvAlignment        = 16
 205 ERASE_POLARITY     = 1
 206 MEMORY_MAPPED      = TRUE
 207 STICKY_WRITE       = TRUE
 208 LOCK_CAP           = TRUE
 209 LOCK_STATUS        = TRUE
 210 WRITE_DISABLED_CAP = TRUE
 211 WRITE_ENABLED_CAP  = TRUE
 212 WRITE_STATUS       = TRUE
 213 WRITE_LOCK_CAP     = TRUE
 214 WRITE_LOCK_STATUS  = TRUE
 215 READ_DISABLED_CAP  = TRUE
 216 READ_ENABLED_CAP   = TRUE
 217 READ_STATUS        = TRUE
 218 READ_LOCK_CAP      = TRUE
 219 READ_LOCK_STATUS   = TRUE
 220
 221 !if $(EDK2_SKIP_PEICORE) == 1
 222   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 223 !else
 224   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 225   INF MdeModulePkg/Core/Pei/PeiMain.inf
 226   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 227   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 228   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 229   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 230   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 231   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 232   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 233 !endif
 234
 235   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 236     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 237       SECTION FV_IMAGE = FVMAIN
 238     }
 239   }
 240
 241
 242 ################################################################################
 243 #
 244 # Rules are use with the [FV] section's module INF type to define
 245 # how an FFS file is created for a given INF file. The following Rule are the default
 246 # rules for the different module type. User can add the customized rules to define the
 247 # content of the FFS file.
 248 #
 249 ################################################################################
 250
 251
 252 ############################################################################
 253 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 254 ############################################################################
 255 #
 256 #[Rule.Common.DXE_DRIVER]
 257 #  FILE DRIVER = $(NAMED_GUID) {
 258 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 259 #    COMPRESS PI_STD {
 260 #      GUIDED {
 261 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 262 #        UI       STRING="$(MODULE_NAME)" Optional
 263 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 264 #      }
 265 #    }
 266 #  }
 267 #
 268 ############################################################################
 269
 270 [Rule.Common.SEC]
 271   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 272     TE  TE Align = 4K                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 273   }
 274
 275 [Rule.Common.PEI_CORE]
 276   FILE PEI_CORE = $(NAMED_GUID) {
 277     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 278     UI     STRING ="$(MODULE_NAME)" Optional
 279   }
 280
 281 [Rule.Common.PEIM]
 282   FILE PEIM = $(NAMED_GUID) {
 283      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 284      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 285      UI       STRING="$(MODULE_NAME)" Optional
 286   }
 287
 288 [Rule.Common.PEIM.TIANOCOMPRESSED]
 289   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 290     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 291     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 292       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 293       UI        STRING="$(MODULE_NAME)" Optional
 294     }
 295   }
 296
 297 [Rule.Common.DXE_CORE]
 298   FILE DXE_CORE = $(NAMED_GUID) {
 299     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 300     UI       STRING="$(MODULE_NAME)" Optional
 301   }
 302
 303 [Rule.Common.UEFI_DRIVER]
 304   FILE DRIVER = $(NAMED_GUID) {
 305     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 306     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 307     UI           STRING="$(MODULE_NAME)" Optional
 308   }
 309
 310 [Rule.Common.DXE_DRIVER]
 311   FILE DRIVER = $(NAMED_GUID) {
 312     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 313     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 314     UI           STRING="$(MODULE_NAME)" Optional
 315   }
 316
 317 [Rule.Common.DXE_RUNTIME_DRIVER]
 318   FILE DRIVER = $(NAMED_GUID) {
 319     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 320     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 321     UI           STRING="$(MODULE_NAME)" Optional
 322   }
 323
 324 [Rule.Common.UEFI_APPLICATION]
 325   FILE APPLICATION = $(NAMED_GUID) {
 326     UI     STRING ="$(MODULE_NAME)"     Optional
 327     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 328   }
 329
 330 [Rule.Common.UEFI_DRIVER.BINARY]
 331   FILE DRIVER = $(NAMED_GUID) {
 332     DXE_DEPEX DXE_DEPEX Optional      |.depex
 333     PE32      PE32                    |.efi
 334     UI        STRING="$(MODULE_NAME)" Optional
 335     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 336   }
 337
 338 [Rule.Common.UEFI_APPLICATION.BINARY]
 339   FILE APPLICATION = $(NAMED_GUID) {
 340     PE32      PE32                    |.efi
 341     UI        STRING="$(MODULE_NAME)" Optional
 342     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 343   }