ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf

   1 #
   2 #  Copyright (c) 2011 - 2013, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.FVP_AARCH64_EFI_SEC]
  28 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in SecureROM.
  29 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x4000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 [FD.FVP_AARCH64_EFI]
  57 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in Flash0.
  58 Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).
  59 ErasePolarity = 1
  60
  61 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  62 BlockSize     = 0x00001000
  63 NumBlocks     = 0x4000
  64
  65 0x00000000|0x00280000
  66 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  67 FV = FVMAIN_COMPACT
  68
  69 ################################################################################
  70 #
  71 # FV Section
  72 #
  73 # [FV] section is used to define what components or modules are placed within a flash
  74 # device file.  This section also defines order the components and modules are positioned
  75 # within the image.  The [FV] section consists of define statements, set statements and
  76 # module statements.
  77 #
  78 ################################################################################
  79
  80 [FV.FVMAIN_SEC]
  81 FvBaseAddress      = 0x0  # Secure ROM
  82 FvForceRebase      = TRUE
  83 FvAlignment        = 16
  84 ERASE_POLARITY     = 1
  85 MEMORY_MAPPED      = TRUE
  86 STICKY_WRITE       = TRUE
  87 LOCK_CAP           = TRUE
  88 LOCK_STATUS        = TRUE
  89 WRITE_DISABLED_CAP = TRUE
  90 WRITE_ENABLED_CAP  = TRUE
  91 WRITE_STATUS       = TRUE
  92 WRITE_LOCK_CAP     = TRUE
  93 WRITE_LOCK_STATUS  = TRUE
  94 READ_DISABLED_CAP  = TRUE
  95 READ_ENABLED_CAP   = TRUE
  96 READ_STATUS        = TRUE
  97 READ_LOCK_CAP      = TRUE
  98 READ_LOCK_STATUS   = TRUE
  99
 100   INF ArmPlatformPkg/Sec/Sec.inf
 101
 102
 103 [FV.FvMain]
 104 BlockSize          = 0x40
 105 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 106 FvAlignment        = 16        # FV alignment and FV attributes setting.
 107 ERASE_POLARITY     = 1
 108 MEMORY_MAPPED      = TRUE
 109 STICKY_WRITE       = TRUE
 110 LOCK_CAP           = TRUE
 111 LOCK_STATUS        = TRUE
 112 WRITE_DISABLED_CAP = TRUE
 113 WRITE_ENABLED_CAP  = TRUE
 114 WRITE_STATUS       = TRUE
 115 WRITE_LOCK_CAP     = TRUE
 116 WRITE_LOCK_STATUS  = TRUE
 117 READ_DISABLED_CAP  = TRUE
 118 READ_ENABLED_CAP   = TRUE
 119 READ_STATUS        = TRUE
 120 READ_LOCK_CAP      = TRUE
 121 READ_LOCK_STATUS   = TRUE
 122
 123   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 124
 125   #
 126   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 127   #
 128   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 129   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 130   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 131   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 132   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 133   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 134   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 135   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 136   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 137   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 138
 139   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 140
 141   #
 142   # Multiple Console IO support
 143   #
 144   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 145   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 146   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 147   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 148   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 149
 150   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 151   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 152   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 153 !ifndef ARM_FOUNDATION_FVP
 154   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 155 !endif
 156   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 157
 158   #
 159   # Semi-hosting filesystem
 160   #
 161   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 162
 163   #
 164   # FAT filesystem + GPT/MBR partitioning
 165   #
 166   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 167   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 168   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 169   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 170
 171 !ifndef ARM_FOUNDATION_FVP
 172   #
 173   # Multimedia Card Interface
 174   #
 175   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 176   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 177 !endif
 178
 179   #
 180   # Platform Driver
 181   #
 182   INF ArmPlatformPkg/ArmVExpressPkg/ArmFvpDxe/ArmFvpDxe.inf
 183   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 184
 185   #
 186   # UEFI application (Shell Embedded Boot Loader)
 187   #
 188   INF ShellBinPkg/UefiShell/UefiShell.inf
 189
 190   #
 191   # Bds
 192   #
 193   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 194   INF ArmPlatformPkg/Bds/Bds.inf
 195
 196
 197 [FV.FVMAIN_COMPACT]
 198 FvAlignment        = 16
 199 ERASE_POLARITY     = 1
 200 MEMORY_MAPPED      = TRUE
 201 STICKY_WRITE       = TRUE
 202 LOCK_CAP           = TRUE
 203 LOCK_STATUS        = TRUE
 204 WRITE_DISABLED_CAP = TRUE
 205 WRITE_ENABLED_CAP  = TRUE
 206 WRITE_STATUS       = TRUE
 207 WRITE_LOCK_CAP     = TRUE
 208 WRITE_LOCK_STATUS  = TRUE
 209 READ_DISABLED_CAP  = TRUE
 210 READ_ENABLED_CAP   = TRUE
 211 READ_STATUS        = TRUE
 212 READ_LOCK_CAP      = TRUE
 213 READ_LOCK_STATUS   = TRUE
 214
 215   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 216   INF MdeModulePkg/Core/Pei/PeiMain.inf
 217   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 218   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 219   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 220   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 221   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 222   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 223   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 224
 225   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 226     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 227       SECTION FV_IMAGE = FVMAIN
 228     }
 229   }
 230
 231
 232 ################################################################################
 233 #
 234 # Rules are use with the [FV] section's module INF type to define
 235 # how an FFS file is created for a given INF file. The following Rule are the default
 236 # rules for the different module type. User can add the customized rules to define the
 237 # content of the FFS file.
 238 #
 239 ################################################################################
 240
 241
 242 ############################################################################
 243 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 244 ############################################################################
 245 #
 246 #[Rule.Common.DXE_DRIVER]
 247 #  FILE DRIVER = $(NAMED_GUID) {
 248 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 249 #    COMPRESS PI_STD {
 250 #      GUIDED {
 251 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 252 #        UI       STRING="$(MODULE_NAME)" Optional
 253 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 254 #      }
 255 #    }
 256 #  }
 257 #
 258 ############################################################################
 259
 260 [Rule.Common.SEC]
 261   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 262     TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 263   }
 264
 265 [Rule.Common.PEI_CORE]
 266   FILE PEI_CORE = $(NAMED_GUID) {
 267     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 268     UI     STRING ="$(MODULE_NAME)" Optional
 269   }
 270
 271 [Rule.Common.PEIM]
 272   FILE PEIM = $(NAMED_GUID) {
 273      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 274      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 275      UI       STRING="$(MODULE_NAME)" Optional
 276   }
 277
 278 [Rule.Common.PEIM.TIANOCOMPRESSED]
 279   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 280     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 281     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 282       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 283       UI        STRING="$(MODULE_NAME)" Optional
 284     }
 285   }
 286
 287 [Rule.Common.DXE_CORE]
 288   FILE DXE_CORE = $(NAMED_GUID) {
 289     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 290     UI       STRING="$(MODULE_NAME)" Optional
 291   }
 292
 293 [Rule.Common.UEFI_DRIVER]
 294   FILE DRIVER = $(NAMED_GUID) {
 295     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 296     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 297     UI           STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.DXE_DRIVER]
 301   FILE DRIVER = $(NAMED_GUID) {
 302     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 303     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 304     UI           STRING="$(MODULE_NAME)" Optional
 305   }
 306
 307 [Rule.Common.DXE_RUNTIME_DRIVER]
 308   FILE DRIVER = $(NAMED_GUID) {
 309     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 310     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 311     UI           STRING="$(MODULE_NAME)" Optional
 312   }
 313
 314 [Rule.Common.UEFI_APPLICATION]
 315   FILE APPLICATION = $(NAMED_GUID) {
 316     UI     STRING ="$(MODULE_NAME)"     Optional
 317     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 318   }
 319
 320 [Rule.Common.UEFI_DRIVER.BINARY]
 321   FILE DRIVER = $(NAMED_GUID) {
 322     DXE_DEPEX DXE_DEPEX Optional      |.depex
 323     PE32      PE32                    |.efi
 324     UI        STRING="$(MODULE_NAME)" Optional
 325     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 326   }
 327
 328 [Rule.Common.UEFI_APPLICATION.BINARY]
 329   FILE APPLICATION = $(NAMED_GUID) {
 330     PE32      PE32                    |.efi
 331     UI        STRING="$(MODULE_NAME)" Optional
 332     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 333   }