ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15_MPCore.fdf

   1 #
   2 #  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.RTSM_VE_Cortex-A15_MPCore_EFI]
  28 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x300
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 0x00080000|0x00280000
  57 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  58 FV = FVMAIN_COMPACT
  59
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvAlignment        = 8
  74 ERASE_POLARITY     = 1
  75 MEMORY_MAPPED      = TRUE
  76 STICKY_WRITE       = TRUE
  77 LOCK_CAP           = TRUE
  78 LOCK_STATUS        = TRUE
  79 WRITE_DISABLED_CAP = TRUE
  80 WRITE_ENABLED_CAP  = TRUE
  81 WRITE_STATUS       = TRUE
  82 WRITE_LOCK_CAP     = TRUE
  83 WRITE_LOCK_STATUS  = TRUE
  84 READ_DISABLED_CAP  = TRUE
  85 READ_ENABLED_CAP   = TRUE
  86 READ_STATUS        = TRUE
  87 READ_LOCK_CAP      = TRUE
  88 READ_LOCK_STATUS   = TRUE
  89
  90   INF ArmPlatformPkg/Sec/Sec.inf
  91
  92
  93 [FV.FvMain]
  94 BlockSize          = 0x40
  95 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  96 FvAlignment        = 8         # FV alignment and FV attributes setting.
  97 ERASE_POLARITY     = 1
  98 MEMORY_MAPPED      = TRUE
  99 STICKY_WRITE       = TRUE
 100 LOCK_CAP           = TRUE
 101 LOCK_STATUS        = TRUE
 102 WRITE_DISABLED_CAP = TRUE
 103 WRITE_ENABLED_CAP  = TRUE
 104 WRITE_STATUS       = TRUE
 105 WRITE_LOCK_CAP     = TRUE
 106 WRITE_LOCK_STATUS  = TRUE
 107 READ_DISABLED_CAP  = TRUE
 108 READ_ENABLED_CAP   = TRUE
 109 READ_STATUS        = TRUE
 110 READ_LOCK_CAP      = TRUE
 111 READ_LOCK_STATUS   = TRUE
 112 FvNameGuid         = 12c68be9-0996-49d3-8c5b-4957379027ee
 113
 114   APRIORI DXE {
 115     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 116   }
 117
 118   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 119   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 120
 121   #
 122   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 123   #
 124   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 125   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 126   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 127   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 128   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 129   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 130   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 131   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 132   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 133   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 134
 135   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 136
 137   #
 138   # Networking stack
 139   #
 140   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 141   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 142   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 143   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 144   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 145   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 146   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 147   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 148   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 149   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 150   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 151
 152   #
 153   # Multiple Console IO support
 154   #
 155   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 156   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 157   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 158   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 159   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 160
 161   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 162   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 163   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 164   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 165   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 166
 167   #
 168   # Semi-hosting filesystem
 169   #
 170   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 171
 172   #
 173   # FAT filesystem + GPT/MBR partitioning
 174   #
 175   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 176   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 177   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 178   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 179
 180   # Versatile Express FileSystem
 181   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 182
 183   #
 184   # Multimedia Card Interface
 185   #
 186   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 187   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 188
 189   #
 190   # Platform  Driver
 191   #
 192   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
 193   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 194
 195   #
 196   # UEFI application (Shell Embedded Boot Loader)
 197   #
 198   INF ShellBinPkg/UefiShell/UefiShell.inf
 199
 200   #
 201   # Bds
 202   #
 203   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 204   INF ArmPlatformPkg/Bds/Bds.inf
 205
 206   # FV Filesystem
 207   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 208
 209   #
 210   # FDT installation
 211   #
 212   # The UEFI driver is at the end of the list of the driver to be dispatched
 213   # after the device drivers (eg: Ethernet) to ensure we have support for them.
 214   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 215
 216   # Example to add a Device Tree to the Firmware Volume
 217   #FILE FREEFORM = PCD(gArmVExpressTokenSpaceGuid.PcdFdtVExpressFvpA15x4) {
 218   #  SECTION RAW = ArmPlatformPkg/ArmVExpressPkg/Fdts/rtsm_ve-ca15x4.dtb
 219   #}
 220
 221   # Legacy Linux Loader
 222   INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
 223
 224 [FV.FVMAIN_COMPACT]
 225 FvAlignment        = 8
 226 ERASE_POLARITY     = 1
 227 MEMORY_MAPPED      = TRUE
 228 STICKY_WRITE       = TRUE
 229 LOCK_CAP           = TRUE
 230 LOCK_STATUS        = TRUE
 231 WRITE_DISABLED_CAP = TRUE
 232 WRITE_ENABLED_CAP  = TRUE
 233 WRITE_STATUS       = TRUE
 234 WRITE_LOCK_CAP     = TRUE
 235 WRITE_LOCK_STATUS  = TRUE
 236 READ_DISABLED_CAP  = TRUE
 237 READ_ENABLED_CAP   = TRUE
 238 READ_STATUS        = TRUE
 239 READ_LOCK_CAP      = TRUE
 240 READ_LOCK_STATUS   = TRUE
 241
 242 !if $(EDK2_SKIP_PEICORE) == 1
 243   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 244 !else
 245   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 246   INF MdeModulePkg/Core/Pei/PeiMain.inf
 247   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 248   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 249   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 250   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 251   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 252   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 253   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 254 !endif
 255
 256   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 257     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 258       SECTION FV_IMAGE = FVMAIN
 259     }
 260   }
 261
 262
 263 ################################################################################
 264 #
 265 # Rules are use with the [FV] section's module INF type to define
 266 # how an FFS file is created for a given INF file. The following Rule are the default
 267 # rules for the different module type. User can add the customized rules to define the
 268 # content of the FFS file.
 269 #
 270 ################################################################################
 271
 272
 273 ############################################################################
 274 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 275 ############################################################################
 276 #
 277 #[Rule.Common.DXE_DRIVER]
 278 #  FILE DRIVER = $(NAMED_GUID) {
 279 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 280 #    COMPRESS PI_STD {
 281 #      GUIDED {
 282 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 283 #        UI       STRING="$(MODULE_NAME)" Optional
 284 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 285 #      }
 286 #    }
 287 #  }
 288 #
 289 ############################################################################
 290
 291 [Rule.Common.SEC]
 292   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 293     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 294   }
 295
 296 [Rule.Common.PEI_CORE]
 297   FILE PEI_CORE = $(NAMED_GUID) {
 298     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 299     UI     STRING ="$(MODULE_NAME)" Optional
 300   }
 301
 302 [Rule.Common.PEIM]
 303   FILE PEIM = $(NAMED_GUID) {
 304      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 305      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 306      UI       STRING="$(MODULE_NAME)" Optional
 307   }
 308
 309 [Rule.Common.PEIM.TIANOCOMPRESSED]
 310   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 311     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 312     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 313       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 314       UI        STRING="$(MODULE_NAME)" Optional
 315     }
 316   }
 317
 318 [Rule.Common.DXE_CORE]
 319   FILE DXE_CORE = $(NAMED_GUID) {
 320     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 321     UI       STRING="$(MODULE_NAME)" Optional
 322   }
 323
 324 [Rule.Common.UEFI_DRIVER]
 325   FILE DRIVER = $(NAMED_GUID) {
 326     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 327     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 328     UI           STRING="$(MODULE_NAME)" Optional
 329   }
 330
 331 [Rule.Common.DXE_DRIVER]
 332   FILE DRIVER = $(NAMED_GUID) {
 333     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 334     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 335     UI           STRING="$(MODULE_NAME)" Optional
 336   }
 337
 338 [Rule.Common.DXE_RUNTIME_DRIVER]
 339   FILE DRIVER = $(NAMED_GUID) {
 340     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 341     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 342     UI           STRING="$(MODULE_NAME)" Optional
 343   }
 344
 345 [Rule.Common.UEFI_APPLICATION]
 346   FILE APPLICATION = $(NAMED_GUID) {
 347     UI     STRING ="$(MODULE_NAME)" Optional
 348     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 349   }
 350
 351 [Rule.Common.UEFI_DRIVER.BINARY]
 352   FILE DRIVER = $(NAMED_GUID) {
 353     DXE_DEPEX DXE_DEPEX Optional      |.depex
 354     PE32      PE32                    |.efi
 355     UI        STRING="$(MODULE_NAME)" Optional
 356     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 357   }
 358
 359 [Rule.Common.UEFI_APPLICATION.BINARY]
 360   FILE APPLICATION = $(NAMED_GUID) {
 361     PE32      PE32                    |.efi
 362     UI        STRING="$(MODULE_NAME)" Optional
 363     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 364   }