ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A15_MPCore.fdf

   1 #
   2 #  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
   3 #  Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28 [FD.RTSM_VE_Cortex-A15_MPCore_EFI]
  29 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  30 Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  31 ErasePolarity = 1
  32
  33 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  34 BlockSize     = 0x00001000
  35 NumBlocks     = 0x300
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 0x00000000|0x00080000
  54 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  55 FV = FVMAIN_SEC
  56
  57 0x00080000|0x00280000
  58 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  59 FV = FVMAIN_COMPACT
  60
  61
  62 ################################################################################
  63 #
  64 # FV Section
  65 #
  66 # [FV] section is used to define what components or modules are placed within a flash
  67 # device file.  This section also defines order the components and modules are positioned
  68 # within the image.  The [FV] section consists of define statements, set statements and
  69 # module statements.
  70 #
  71 ################################################################################
  72
  73 [FV.FVMAIN_SEC]
  74 FvAlignment        = 8
  75 ERASE_POLARITY     = 1
  76 MEMORY_MAPPED      = TRUE
  77 STICKY_WRITE       = TRUE
  78 LOCK_CAP           = TRUE
  79 LOCK_STATUS        = TRUE
  80 WRITE_DISABLED_CAP = TRUE
  81 WRITE_ENABLED_CAP  = TRUE
  82 WRITE_STATUS       = TRUE
  83 WRITE_LOCK_CAP     = TRUE
  84 WRITE_LOCK_STATUS  = TRUE
  85 READ_DISABLED_CAP  = TRUE
  86 READ_ENABLED_CAP   = TRUE
  87 READ_STATUS        = TRUE
  88 READ_LOCK_CAP      = TRUE
  89 READ_LOCK_STATUS   = TRUE
  90
  91   INF ArmPlatformPkg/Sec/Sec.inf
  92
  93
  94 [FV.FvMain]
  95 BlockSize          = 0x40
  96 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  97 FvAlignment        = 8         # FV alignment and FV attributes setting.
  98 ERASE_POLARITY     = 1
  99 MEMORY_MAPPED      = TRUE
 100 STICKY_WRITE       = TRUE
 101 LOCK_CAP           = TRUE
 102 LOCK_STATUS        = TRUE
 103 WRITE_DISABLED_CAP = TRUE
 104 WRITE_ENABLED_CAP  = TRUE
 105 WRITE_STATUS       = TRUE
 106 WRITE_LOCK_CAP     = TRUE
 107 WRITE_LOCK_STATUS  = TRUE
 108 READ_DISABLED_CAP  = TRUE
 109 READ_ENABLED_CAP   = TRUE
 110 READ_STATUS        = TRUE
 111 READ_LOCK_CAP      = TRUE
 112 READ_LOCK_STATUS   = TRUE
 113 FvNameGuid         = 12c68be9-0996-49d3-8c5b-4957379027ee
 114
 115   APRIORI DXE {
 116     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 117   }
 118
 119   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 120   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 121
 122   #
 123   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 124   #
 125   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 126   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 127   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 128   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 129   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 130   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 131   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 132   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 133   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 134   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 135
 136   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 137
 138   #
 139   # Networking stack
 140   #
 141   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 142   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 143   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 144   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 145   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 146   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 147   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 148   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 149   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 150   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 151   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 152
 153   #
 154   # Multiple Console IO support
 155   #
 156   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 157   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 158   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 159   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 160   INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
 161
 162   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 163   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 164   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 165   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 166   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 167
 168   #
 169   # Semi-hosting filesystem
 170   #
 171   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 172
 173   #
 174   # FAT filesystem + GPT/MBR partitioning
 175   #
 176   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 177   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 178   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 179   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 180
 181   # Versatile Express FileSystem
 182   INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf
 183
 184   #
 185   # Multimedia Card Interface
 186   #
 187   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 188   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 189
 190   #
 191   # Platform  Driver
 192   #
 193   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
 194   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 195
 196   #
 197   # UEFI application (Shell Embedded Boot Loader)
 198   #
 199   INF ShellBinPkg/UefiShell/UefiShell.inf
 200
 201   #
 202   # Bds
 203   #
 204   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 205   INF ArmPlatformPkg/Bds/Bds.inf
 206
 207   # FV Filesystem
 208   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 209
 210   #
 211   # FDT installation
 212   #
 213   # The UEFI driver is at the end of the list of the driver to be dispatched
 214   # after the device drivers (eg: Ethernet) to ensure we have support for them.
 215   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 216
 217   # Example to add a Device Tree to the Firmware Volume
 218   #FILE FREEFORM = PCD(gArmVExpressTokenSpaceGuid.PcdFdtVExpressFvpA15x4) {
 219   #  SECTION RAW = ArmPlatformPkg/ArmVExpressPkg/Fdts/rtsm_ve-ca15x4.dtb
 220   #}
 221
 222   # Legacy Linux Loader
 223   INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
 224
 225 [FV.FVMAIN_COMPACT]
 226 FvAlignment        = 8
 227 ERASE_POLARITY     = 1
 228 MEMORY_MAPPED      = TRUE
 229 STICKY_WRITE       = TRUE
 230 LOCK_CAP           = TRUE
 231 LOCK_STATUS        = TRUE
 232 WRITE_DISABLED_CAP = TRUE
 233 WRITE_ENABLED_CAP  = TRUE
 234 WRITE_STATUS       = TRUE
 235 WRITE_LOCK_CAP     = TRUE
 236 WRITE_LOCK_STATUS  = TRUE
 237 READ_DISABLED_CAP  = TRUE
 238 READ_ENABLED_CAP   = TRUE
 239 READ_STATUS        = TRUE
 240 READ_LOCK_CAP      = TRUE
 241 READ_LOCK_STATUS   = TRUE
 242
 243 !if $(EDK2_SKIP_PEICORE) == 1
 244   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 245 !else
 246   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 247   INF MdeModulePkg/Core/Pei/PeiMain.inf
 248   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 249   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 250   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 251   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 252   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 253   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 254   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 255 !endif
 256
 257   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 258     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 259       SECTION FV_IMAGE = FVMAIN
 260     }
 261   }
 262
 263
 264 ################################################################################
 265 #
 266 # Rules are use with the [FV] section's module INF type to define
 267 # how an FFS file is created for a given INF file. The following Rule are the default
 268 # rules for the different module type. User can add the customized rules to define the
 269 # content of the FFS file.
 270 #
 271 ################################################################################
 272
 273
 274 ############################################################################
 275 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 276 ############################################################################
 277 #
 278 #[Rule.Common.DXE_DRIVER]
 279 #  FILE DRIVER = $(NAMED_GUID) {
 280 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 281 #    COMPRESS PI_STD {
 282 #      GUIDED {
 283 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 284 #        UI       STRING="$(MODULE_NAME)" Optional
 285 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 286 #      }
 287 #    }
 288 #  }
 289 #
 290 ############################################################################
 291
 292 [Rule.Common.SEC]
 293   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 294     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 295   }
 296
 297 [Rule.Common.PEI_CORE]
 298   FILE PEI_CORE = $(NAMED_GUID) {
 299     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 300     UI     STRING ="$(MODULE_NAME)" Optional
 301   }
 302
 303 [Rule.Common.PEIM]
 304   FILE PEIM = $(NAMED_GUID) {
 305      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 306      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 307      UI       STRING="$(MODULE_NAME)" Optional
 308   }
 309
 310 [Rule.Common.PEIM.TIANOCOMPRESSED]
 311   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 312     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 313     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 314       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 315       UI        STRING="$(MODULE_NAME)" Optional
 316     }
 317   }
 318
 319 [Rule.Common.DXE_CORE]
 320   FILE DXE_CORE = $(NAMED_GUID) {
 321     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 322     UI       STRING="$(MODULE_NAME)" Optional
 323   }
 324
 325 [Rule.Common.UEFI_DRIVER]
 326   FILE DRIVER = $(NAMED_GUID) {
 327     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 328     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 329     UI           STRING="$(MODULE_NAME)" Optional
 330   }
 331
 332 [Rule.Common.DXE_DRIVER]
 333   FILE DRIVER = $(NAMED_GUID) {
 334     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 335     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 336     UI           STRING="$(MODULE_NAME)" Optional
 337   }
 338
 339 [Rule.Common.DXE_RUNTIME_DRIVER]
 340   FILE DRIVER = $(NAMED_GUID) {
 341     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 342     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 343     UI           STRING="$(MODULE_NAME)" Optional
 344   }
 345
 346 [Rule.Common.UEFI_APPLICATION]
 347   FILE APPLICATION = $(NAMED_GUID) {
 348     UI     STRING ="$(MODULE_NAME)" Optional
 349     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 350   }
 351
 352 [Rule.Common.UEFI_DRIVER.BINARY]
 353   FILE DRIVER = $(NAMED_GUID) {
 354     DXE_DEPEX DXE_DEPEX Optional      |.depex
 355     PE32      PE32                    |.efi
 356     UI        STRING="$(MODULE_NAME)" Optional
 357     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 358   }
 359
 360 [Rule.Common.UEFI_APPLICATION.BINARY]
 361   FILE APPLICATION = $(NAMED_GUID) {
 362     PE32      PE32                    |.efi
 363     UI        STRING="$(MODULE_NAME)" Optional
 364     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 365   }